X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/839d17582bad556c85fba50bb136d1c1fa878a54..6a86c6ad94ba9f2a00d21db1a38c46b8c011f213:/configure.com diff --git a/configure.com b/configure.com index 721b889..f1c6171 100644 --- a/configure.com +++ b/configure.com @@ -44,6 +44,7 @@ $ extra_flags = "" $ user_c_flags = "" $ use_ieee_math = "y" $ be_case_sensitive = "n" +$ shorten_long_symbols = "y" $ unlink_all_versions = "n" $ builder = "MMK" $ use_vmsdebug_perl = "n" @@ -479,6 +480,11 @@ $ IF ( F$SEARCH("UU.DIR").EQS."" ) $ THEN $ CREATE/DIRECTORY [.UU] $ ELSE +$ IF ( F$SEARCH("[.UU.CXX_REPOSITORY]*.*").NES."" ) +$ THEN +$ DELETE/NOLOG/NOCONFIRM [.UU.CXX_REPOSITORY]*.*;* +$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) [.UU]CXX_REPOSITORY.DIR +$ ENDIF $ IF ( F$SEARCH("[.UU]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM [.UU]*.*;* $ ENDIF $!: Configure runs within the UU subdirectory @@ -920,10 +926,10 @@ $! ...and only accept symbols if they're in the | delimited list below $! $ config_symbols0 ="|archlib|archlibexp|bin|binexp|builddir|cf_email|config_sh|installarchlib|installbin|installman1dir|installman3dir|" $ config_symbols1 ="|installprivlib|installscript|installsitearch|installsitelib|most|oldarchlib|oldarchlibexp|osname|pager|perl_symbol|perl_verb|" -$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|try_cxx|use64bitall|use64bitint|" +$ config_symbols2 ="|prefix|privlib|privlibexp|scriptdir|sitearch|sitearchexp|sitebin|sitelib|sitelib_stem|sitelibexp|usecxx|use64bitall|use64bitint|" $ config_symbols3 ="|usecasesensitive|usedefaulttypes|usedevel|useieee|useithreads|uselongdouble|usemultiplicity|usemymalloc|usedebugging_perl|" -$ config_symbols4 ="|useperlio|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|" -$ config_symbols5 ="|buildmake|builder|usethreadupcalls|usekernelthread" +$ config_symbols4 ="|usesecurelog|usethreads|usevmsdebug|usefaststdio|usemallocwrap|unlink_all_versions|uselargefiles|usesitecustomize|" +$ config_symbols5 ="|buildmake|builder|usethreadupcalls|usekernelthreads|useshortenedsymbols|useversionedarchname" $! $ open/read CONFIG 'config_sh' $ rd_conf_loop: @@ -1142,11 +1148,23 @@ $Beyond_TimeZone: $ tz = f$fao("UTC!AS!UL:!2ZL",signothetime,tzhour,tzminrem) $ cf_time = "''wkday' ''mon' ''mday' ''hour':''min':''sec' ''tz' ''year'" $! -$!: determine the architecture name -$! Note that DCL in VMS V5.4 does not have F$GETSYI("ARCH_NAME") -$! but does have F$GETSYI("HW_MODEL"). -$! Please try to use either archname .EQS. "VMS_VAX" or archname .EQS. -$! "VMS_AXP" from here on to allow cross-platform configuration (e.g. +$! This quotation from Configure has to be included on VMS: +$! +$ TYPE SYS$INPUT: +$ DECK + +There is, however, a strange, musty smell in the air that reminds me of +something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit. +$ EOD +$! +$! Determine the architecture name. For now we just get the base +$! architecture name, which may accumulate various minus sign-delimited +$! appendages later depending on configuration options. But we need the +$! base name early because not all questions are worth asking on all +$! platforms. +$! +$! Please use F$ELEMENT(0,"-",archname) .EQS. "VMS_VAX" (or "VMS_AXP" or +$! "VMS_IA64") from here on to allow cross-platform configuration (e.g. $! configure a VAX build on an Alpha). $! $ IF (F$GETSYI("HW_MODEL") .LT. 1024 .AND. F$GETSYI("HW_MODEL") .GT. 0) @@ -1168,164 +1186,6 @@ $ arch_type = "ARCH-TYPE=__IA64__" $ ENDIF $ alignbytes="8" $ ENDIF -$ dflt = archname -$ rp = "What is your architecture name? [''archname'] " -$ GOSUB myread -$ IF ans.NES."" -$ THEN -$ ans = F$EDIT(ans,"COLLAPSE, UPCASE") -$ IF (ans.NES.archname) !.AND.knowitall -$ THEN -$ echo4 "I'll go with ''archname' anyway..." -$ ENDIF -$ ENDIF -$ bool_dflt = "n" -$ vms_prefix = "perl_root" -$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE") -$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] " -$ GOSUB myread -$ IF .NOT. ans -$ THEN -$ sharedperl = "N" -$ ELSE -$ sharedperl = "Y" -$ IF (archname.EQS."VMS_AXP") -$ THEN -$ macros = macros + """AXE=1""," -$ ENDIF -$ IF (archname.EQS."VMS_IA64") -$ THEN -$ macros = macros + """IXE=1""," -$ ENDIF -$ ENDIF -$! -$!: is AFS running? !sfn -$!: decide how portable to be. Allow command line overrides. !sfn -$!: set up shell script to do ~ expansion !sfn -$!: expand filename !sfn -$!: now set up to get a file name !sfn -$! -$ IF F$TYPE(prefix) .EQS. "" -$ THEN -$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]" -$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;" -$ prefixbase = prefix - "]" -$! Add _ROOT to make install PERL_ROOT differ from build directory. -$ prefix = prefixbase + "_ROOT.]" -$ ENDIF -$ ! more redundant scrubbing of values -$ prefix = prefix - "000000." -$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]" -$ src = prefix -$!: determine root of directory hierarchy where package will be installed. -$ dflt = prefix -$ IF .NOT.silent -$ THEN -$ echo "" -$ echo "By default, ''package' will be installed in ''dflt', pod" -$ echo "pages under ''prefixbase'.LIB.POD], etc..., i.e. with ''dflt' as prefix for" -$ echo "all installation directories." -$ echo "On ''osname' the prefix is used to DEFINE the ''vms_prefixup' prior to installation" -$ echo "as well as during subsequent use of ''package' via ''packageup'_SETUP.COM." -$ ENDIF -$ rp = "Installation prefix to use (for ''vms_prefixup')? [ ''dflt' ] " -$ GOSUB myread -$ IF ans.NES."" -$ THEN -$ prefix = ans -$ IF F$LOCATE(".]",ans) .EQ. F$LENGTH(ans) THEN prefix = prefix - "]" + ".]" -$ ELSE -$ prefix = dflt -$ ENDIF -$ perl_root = prefix -$! -$! Check here for pre-existing PERL_ROOT. -$! -> ask if removal desired. -$! Check here for writability of requested PERL_ROOT if it is not the default (cwd). -$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable. -$! -$ tmp = perl_root - ".]" + "]" -$ dflt = f$parse(tmp,,,,) -$ IF dflt .eqs. "" -$ THEN -$ echo4 "''tmp' does not yet exist." -$! create/directory 'tmp' -$ ELSE -$ echo4 "''tmp' already exists." -$ ENDIF -$! -$ vms_skip_install = "true" -$ bool_dflt = "y" -$! echo "" -$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] " -$ GOSUB myread -$ IF (.NOT.ans) THEN vms_skip_install = "false" -$ IF (.NOT.vms_skip_install) -$ THEN -$! -$!: set the prefixit variable, to compute a suitable default value -$! -$!: determine where private library files go -$!: Usual default is /usr/local/lib/perl5. Also allow things like -$!: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant. -$ IF .NOT.silent -$ THEN -$ TYPE SYS$INPUT: -$ DECK - -There are some auxiliary files for perl5 that need to be put into a -private library directory that is accessible by everyone. -$ EOD -$ ENDIF -$ IF F$TYPE(privlib) .NES. "" -$ THEN dflt = privlib -$ ELSE dflt = "''vms_prefix':[lib]" -$ ENDIF -$ rp = "Pathname where the private library files will reside? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ privlib = ans -$! -$ ENDIF !%Config-I-VMS, skip remaining "where install" questions -$! -$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true -$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = "" -$ IF perl_symbol -$ THEN bool_dflt = "y" -$ ELSE bool_dflt = "n" -$ ENDIF -$ IF .NOT.silent -$ THEN -$ echo "" -$ echo "You may choose to write ''packageup'_SETUP.COM to assign a foreign" -$ echo "symbol to invoke ''package', which is the usual method." -$ echO "If you do not do so then you would need a DCL command verb at the" -$ echo "process or the system wide level." -$ ENDIF -$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] " -$ GOSUB myread -$ IF (.NOT.ans) THEN perl_symbol = "false" -$! -$ IF (.NOT.perl_symbol) -$ THEN -$ IF perl_verb .EQS. "DCLTABLES" -$ THEN bool_dflt = "n" -$ ELSE bool_dflt = "y" -$ ENDIF -$ IF .NOT.silent -$ THEN -$ echo "" -$ echo "Since you won't be using a symbol you must choose to put the ''packageup'" -$ echo "verb in a per-process table or in the system wide DCLTABLES (which" -$ echo "would require write privilege)." -$ ENDIF -$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] " -$ GOSUB myread -$ IF (.NOT.ans) -$ THEN perl_verb = "DCLTABLES" -$ ELSE perl_verb = "PROCESS" -$ ENDIF -$ ENDIF ! (.NOT.perl_symbol) $! $!: set the base revision $ baserev="5.0" @@ -1434,245 +1294,76 @@ $ echo "(You have ''package' ''version_patchlevel_string'.)" $! $ version = revision + "_" + patchlevel + "_" + subversion $! -$ IF (.NOT.vms_skip_install) -$ THEN -$!: set the prefixup variable, to restore leading tilde escape !sfn +$!: see if we need a special compiler +$! cc_list = "cc/decc|gcc" !%Config-I-VMS, compiler symbols/commands $! -$!: determine where public architecture dependent libraries go -$ IF (.NOT.silent) +$ nocc = "f" +$ vms_cc_dflt = "" +$ vms_cc_available = "" +$! +$ OPEN/WRITE CONFIG ccvms.c +$ WRITE CONFIG "#ifdef __DECC" +$ WRITE CONFIG "#include " !DECC is sooo picky +$ WRITE CONFIG "#endif" +$ WRITE CONFIG "#include " +$ WRITE CONFIG "int main() {" +$ WRITE CONFIG "#ifdef __DECC" +$ WRITE CONFIG " printf(""/DECC\n"");" +$ WRITE CONFIG "#else" +$ WRITE CONFIG " printf(""/VAXC\n"");" +$ WRITE CONFIG "#endif" +$ WRITE CONFIG " exit(0);" +$ WRITE CONFIG "}" +$ CLOSE CONFIG +$! +$ SET NOON +$ DEFINE/USER_MODE SYS$ERROR _NLA0: +$ DEFINE/USER_MODE SYS$OUTPUT _NLA0: +$ cc/NoObj/list=ccvms.lis ccvms.c +$ tmp = $status +$ SET ON +$ IF (silent) THEN GOSUB Shut_up +$ IF tmp.NE.%X10B90001 +$ THEN +$ IF tmp.NE.%X10000001 +$ THEN +$ nocc = "t" !%X10000001 is return from gcc +$ GOTO Gcc_initial_check +$ ENDIF +$ ENDIF +$! +$ GOSUB List_Parse +$ IF .NOT.silent THEN echo "" +$ echo "Default ""cc"" is ''line' ''archsufx' ''F$GETSYI("VERSION")'" +$ IF F$LOCATE("VAX",line).NE.F$LENGTH(line) +$ THEN +$ IF .NOT.silent $ THEN -$ echo "" -$ echo "''package' contains architecture-dependent library files. If you are" +$ echo "Will try cc/decc..." $ ENDIF -$ IF (.NOT.silent) +$ SET NOON +$ DEFINE/USER_MODE SYS$ERROR NL: +$ DEFINE/USER_MODE SYS$OUTPUT NL: +$ cc/decc/NoObj/list=ccvms.lis ccvms.c +$ tmp = $status +$ SET ON +$ IF (silent) THEN GOSUB Shut_up +$ IF tmp.NE.%X10B90001 $ THEN -$ TYPE SYS$INPUT: -$ DECK -sharing libraries in a heterogeneous environment, you might store -these files in a separate location. Otherwise, you can just include -them with the rest of the public library files. -$ EOD +$ echo "Apparently you don't have that one." +$ ELSE +$ GOSUB List_parse +$ echo "You also have: ''line' ''archsufx' ''F$GETSYI("VERSION")'" +$ vms_cc_available = vms_cc_available + "cc/decc " $ ENDIF -$ IF F$TYPE(archlib) .NES. "" -$ THEN dflt = archlib -$ ELSE dflt = privlib - "]" + "." + archname + "." + version + "]" +$ ELSE +$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line)) - + .or.(F$LOCATE("HP",F$EDIT(line,"UPCASE")).NE.F$LENGTH(line)) +$ THEN +$ vms_cc_dflt = "/decc" +$ vms_cc_available = vms_cc_available + "cc/decc " $ ENDIF -$ rp = "Where do you want to put the public architecture-dependent libraries? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ archlib = ans -$! -$ ENDIF !%Config-I-VMS, skip "where install" questions -$! -$! This quotation from Configure has to be included on VMS: -$! -$ TYPE SYS$INPUT: -$ DECK - -There is, however, a strange, musty smell in the air that reminds me of -something...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit. -$ EOD -$ IF (.NOT.vms_skip_install) -$ THEN -$!: it so happens the Eunice I know will not run shell scripts in Unix format -$! -$!: see if setuid scripts can be secure !sfn -$!: now see if they want to do setuid emulation !sfn -$! -$!: determine where site specific libraries go. -$ IF .NOT.silent -$ THEN -$ TYPE SYS$INPUT: -$ DECK - -The installation process will also create a directory for -site-specific extensions and modules. Some users find it convenient -to place all local files in this directory rather than in the main -distribution directory. -$ EOD -$ ENDIF -$ IF F$TYPE(sitelib) .NES. "" -$ THEN dflt = sitelib -$ ELSE dflt = privlib - "]" + ".SITE_PERL]" -$ ENDIF -$ rp = "Pathname for the site-specific library files? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ sitelib = ans -$! -$!: determine where site specific architecture-dependent libraries go. -$ IF .NOT.silent -$ THEN TYPE SYS$INPUT: -$ DECK - -The installation process will also create a directory for -architecture-dependent site-specific extensions and modules. -$ EOD -$ ENDIF -$ IF F$TYPE(sitearch) .NES. "" -$ THEN dflt = sitearch -$ ELSE dflt = sitelib - "]" + "." + archname + "]" -$ ENDIF -$ rp = "Pathname for the site-specific architecture-dependent library files? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ sitearch = ans -$! -$!: determine where old public architecture dependent libraries might be -$! -$!: determine where public executables go -$ IF F$TYPE(bin) .NES. "" -$ THEN dflt = bin -$! ELSE dflt = prefix - ".]" + ".BIN]" -$ ELSE dflt = "/''vms_prefix'" -$ ENDIF -$ rp = "Pathname where the public executables will reside? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ bin = ans -$! -$!: determine where add-on public executables go -$ IF F$TYPE(sitebin) .NES. "" -$ THEN dflt = sitebin -$ ELSE dflt = "''vms_prefix':[bin.''archname']" -$ ENDIF -$ rp = "Pathname where the add-on public executables should be installed? " -$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") -$ GOSUB myread -$ sitebin = ans -$! -$!: determine where manual pages are on this system -$!: What suffix to use on installed man pages -$!: see if we can have long filenames -$!: determine where library module manual pages go -$!: What suffix to use on installed man pages -$!: see what memory models we can support -$! -$ ELSE ! skipping "where install" questions, we must set some symbols -$ IF F$TYPE(archlib).EQS."" THEN - - archlib="''vms_prefix':[lib.''archname'.''version']" -$ IF F$TYPE(bin) .EQS. "" THEN - - bin="/''vms_prefix'" -$ IF F$TYPE(privlib) .EQS. "" THEN - - privlib ="''vms_prefix':[lib]" -$ IF F$TYPE(sitearch) .EQS. "" THEN - - sitearch="''vms_prefix':[lib.site_perl.''archname']" -$ IF F$TYPE(sitelib) .EQS. "" THEN - - sitelib ="''vms_prefix':[lib.site_perl]" -$ IF F$TYPE(sitebin) .EQS. "" THEN - - sitebin="''vms_prefix':[bin.''archname']" -$ ENDIF !%Config-I-VMS, skip "where install" questions -$! -$! These derived locations can be set whether we've opted to -$! skip the where install questions or not. -$! -$ IF F$TYPE(archlibexp) .EQS. "" THEN - - archlibexp="''vms_prefix':[lib.''archname'.''version']" -$ IF F$TYPE(binexp) .EQS. "" THEN - - binexp ="''vms_prefix':[000000]" -$ IF F$TYPE(builddir) .EQS. "" THEN - - builddir ="''vms_prefix':[000000]" -$ IF F$TYPE(installarchlib) .EQS. "" THEN - - installarchlib="''vms_prefix':[lib.''archname'.''version']" -$ IF F$TYPE(installbin) .EQS. "" THEN - - installbin ="''vms_prefix':[000000]" -$ IF F$TYPE(installscript) .EQS. "" THEN - - installscript ="''vms_prefix':[utils]" -$ IF F$TYPE(installman1dir) .EQS. "" THEN - - installman1dir ="''vms_prefix':[man.man1]" -$ IF F$TYPE(installman3dir) .EQS. "" THEN - - installman3dir ="''vms_prefix':[man.man3]" -$ IF F$TYPE(installprivlib) .EQS. "" THEN - - installprivlib ="''vms_prefix':[lib]" -$ IF F$TYPE(installsitearch) .EQS. "" THEN - - installsitearch="''vms_prefix':[lib.site_perl.''archname']" -$ IF F$TYPE(installsitelib) .EQS. "" THEN - - installsitelib ="''vms_prefix':[lib.site_perl]" -$ IF F$TYPE(oldarchlib) .EQS. "" THEN - - oldarchlib="''vms_prefix':[lib.''archname']" -$ IF F$TYPE(oldarchlibexp) .EQS. "" THEN - - oldarchlibexp="''vms_prefix':[lib.''archname']" -$ IF F$TYPE(privlibexp) .EQS. "" THEN - - privlibexp ="''vms_prefix':[lib]" -$ IF F$TYPE(scriptdir) .EQS. "" THEN - - scriptdir ="''vms_prefix':[utils]" -$ IF F$TYPE(sitearchexp) .EQS. "" THEN - - sitearchexp ="''vms_prefix':[lib.site_perl.''archname']" -$ IF F$TYPE(sitelib_stem) .EQS. "" THEN - - sitelib_stem ="''vms_prefix':[lib.site_perl]" -$ IF F$TYPE(sitelibexp) .EQS. "" THEN - - sitelibexp ="''vms_prefix':[lib.site_perl]" -$! -$!: see if we need a special compiler -$! cc_list = "cc/decc|gcc" !%Config-I-VMS, compiler symbols/commands -$! -$ nocc = "f" -$ vms_cc_dflt = "" -$ vms_cc_available = "" -$! -$ OPEN/WRITE CONFIG ccvms.c -$ WRITE CONFIG "#ifdef __DECC" -$ WRITE CONFIG "#include " !DECC is sooo picky -$ WRITE CONFIG "#endif" -$ WRITE CONFIG "#include " -$ WRITE CONFIG "int main() {" -$ WRITE CONFIG "#ifdef __DECC" -$ WRITE CONFIG " printf(""/DECC\n"");" -$ WRITE CONFIG "#else" -$ WRITE CONFIG " printf(""/VAXC\n"");" -$ WRITE CONFIG "#endif" -$ WRITE CONFIG " exit(0);" -$ WRITE CONFIG "}" -$ CLOSE CONFIG -$! -$ SET NOON -$ DEFINE/USER_MODE SYS$ERROR _NLA0: -$ DEFINE/USER_MODE SYS$OUTPUT _NLA0: -$ cc/NoObj/list=ccvms.lis ccvms.c -$ tmp = $status -$ SET ON -$ IF (silent) THEN GOSUB Shut_up -$ IF tmp.NE.%X10B90001 -$ THEN -$ IF tmp.NE.%X10000001 -$ THEN -$ nocc = "t" !%X10000001 is return from gcc -$ GOTO Gcc_initial_check -$ ENDIF -$ ENDIF -$! -$ GOSUB List_Parse -$ IF .NOT.silent THEN echo "" -$ echo "Default ""cc"" is ''line' ''archsufx' ''F$GETSYI("VERSION")'" -$ IF F$LOCATE("VAX",line).NE.F$LENGTH(line) -$ THEN -$ IF .NOT.silent -$ THEN -$ echo "Will try cc/decc..." -$ ENDIF -$ SET NOON -$ DEFINE/USER_MODE SYS$ERROR NL: -$ DEFINE/USER_MODE SYS$OUTPUT NL: -$ cc/decc/NoObj/list=ccvms.lis ccvms.c -$ tmp = $status -$ SET ON -$ IF (silent) THEN GOSUB Shut_up -$ IF tmp.NE.%X10B90001 -$ THEN -$ echo "Apparently you don't have that one." -$ ELSE -$ GOSUB List_parse -$ echo "You also have: ''line' ''archsufx' ''F$GETSYI("VERSION")'" -$ vms_cc_available = vms_cc_available + "cc/decc " -$ ENDIF -$ ELSE -$ IF (F$LOCATE("DEC",line).NE.F$LENGTH(line)).or.(F$LOCATE("Compaq",line).NE.F$LENGTH(line)) - - .or.(F$LOCATE("HP",F$EDIT(line,"UPCASE")).NE.F$LENGTH(line)) -$ THEN -$ vms_cc_dflt = "/decc" -$ vms_cc_available = vms_cc_available + "cc/decc " -$ ENDIF -$ ENDIF +$ ENDIF $! $Gcc_initial_check: $ echo "Checking for gcc" @@ -1703,14 +1394,11 @@ $ DELETE/NOLOG/NOCONFIRM gccvers.lis; $! $Cxx_initial_check: $! -$! Do note that [vms]perl source files have a ways to go before they will -$! compile under CXX. -$! In order to test Configure.com with CXX invoke it with "-Dtry_cxx" on +$! In order to build with the HP C++ compiler, invoke configure.com with "-Dusecxx" on $! the command line. $! -$ IF F$TYPE(try_cxx) .EQS. "" THEN try_cxx := n -$ IF try_cxx .OR. try_cxx .EQS. "define" -$! +$ IF F$TYPE(usecxx) .EQS. "" THEN usecxx := n +$ IF usecxx .OR. usecxx .EQS. "define" $ THEN $! $ echo "Checking for CXX..." @@ -1751,7 +1439,7 @@ $ ! link && DEC C++ V1.1-001 on VMS VAX V5.5-2 $ ! link && DEC C++ V5.6-013 on OpenVMS VAX V7.1 $ IF tmp .eq. %X10000001 $ THEN -$ ld_try = "Link" +$ ld_try = "Link/nodebug" $ vms_cc_available = vms_cc_available + "cxx " $ echo "CXX and LINK are available." $ ELSE @@ -1791,7 +1479,12 @@ $ echo "Available compiler(s):" $ echo "( ''vms_cc_available')" $ IF .NOT.nocc $ THEN -$ dflt = "cc''vms_cc_dflt'" !-> "cc" in case first compile went OK +$ IF usecxx .OR. usecxx .EQS. "define" +$ THEN +$ dflt = "cxx" +$ ELSE +$ dflt = "cc''vms_cc_dflt'" !-> "cc" in case first compile went OK +$ ENDIF $ ELSE $ dflt = gcc_symbol $ ENDIF @@ -1892,7 +1585,7 @@ $ CLOSE CONFIG $ echo "You are using Dec C ''line'" $ ccversion = line $ Dec_C_Version = F$INTEGER(line) -$ IF Dec_C_Version .GE. 60200000 .AND. archname .NES. "VMS_VAX" +$ IF Dec_C_Version .GE. 60200000 .AND. F$ELEMENT(0, "-", archname) .NES. "VMS_VAX" $ THEN $ echo4 "adding /NOANSI_ALIAS qualifier to ccflags." $ ccflags = ccflags + "/NOANSI_ALIAS" @@ -2060,6 +1753,8 @@ $ echo "You are using CXX ''line'" $ cxxversion = line $ ccversion = line $ d_cplusplus = "define" +$ echo4 "adding /NOANSI_ALIAS qualifier to ccflags." +$ ccflags = ccflags + "/NOANSI_ALIAS" $ CALL Cxx_demangler_cleanup $ ELSE $ d_cplusplus = "undef" @@ -2087,12 +1782,12 @@ $! $List_Parse: $ OPEN/READ CONFIG ccvms.lis $ READ CONFIG line -$ IF archname .EQS. "VMS_VAX" +$ IF F$ELEMENT(0, "-", archname) .EQS. "VMS_VAX" $ THEN $ read CONFIG line $ archsufx = "VAX" $ ELSE -$ IF archname .EQS. "VMS_AXP" +$ IF F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP" $ THEN $ archsufx = "AXP" $ ELSE @@ -2242,15 +1937,6 @@ $!: Looking for optional libraries $!: see if nm is to be used to determine whether a symbol is defined or not $!: get list of predefined functions in a handy place $!: see if we have sigaction or sigprocmask -$!: see whether socketshr exists -$ IF (F$SEARCH(F$PARSE("SocketShr","Sys$Share:.Exe")).NES."") -$ THEN -$ Has_socketshr = "T" -$ echo "" -$ echo4 "Hmm... Looks like you have SOCKETSHR Berkeley networking support." -$ ELSE -$ Has_socketshr = "F" -$ ENDIF $ IF (ccname .EQS. "DEC" .AND. Dec_C_Version .GE. 50200000) .OR. (ccname .EQS. "CXX") $ THEN $ Has_Dec_C_Sockets = "T" @@ -2259,20 +1945,14 @@ $ echo4 "Hmm... Looks like you have Dec C Berkeley networking support." $ ELSE $ Has_Dec_C_Sockets = "F" $ ENDIF -$ ! Hey, we've got both. Default to Dec C, then, since it's better -$ IF Has_socketshr .OR. Has_Dec_C_Sockets +$! +$ IF Has_Dec_C_Sockets $ THEN $ echo "" -$ echo "You have sockets available. Which socket stack do you want to" -$ echo "build into Perl?" -$ IF Has_Dec_C_Sockets -$ THEN -$ dflt = "DECC" -$ ELSE -$ dflt = "SOCKETSHR" -$ ENDIF -$ rp = "Choose socket stack (NONE" -$ IF Has_socketshr THEN rp = rp + ",SOCKETSHR" +$ echo "You have sockets available via the C library. Should socket support" +$ echo "be built into Perl?" +$ dflt = "DECC" +$ rp = "Choose socket support option (NONE" $ IF Has_Dec_C_Sockets THEN rp = rp + ",DECC" $ rp = rp + ") [''dflt'] " $ GOSUB myread @@ -2280,7 +1960,6 @@ $ Has_Dec_C_Sockets = "F" $ Has_socketshr = "F" $ ans = F$EDIT(ans,"TRIM,COMPRESS,LOWERCASE") $ IF ans.eqs."decc" THEN Has_Dec_C_Sockets = "T" -$ IF ans.eqs."socketshr" THEN Has_socketshr = "T" $ ENDIF $! $! @@ -2322,118 +2001,18 @@ $ rp = "Build a DEBUGGING version of Perl? [''bool_dflt'] " $ GOSUB myread $ use_debugging_perl = ans $! -$! Ask if they want to build with MULTIPLICITY -$ echo "" -$ echo "Perl can be built so that multiple Perl interpreters can coexist" -$ echo "within the same Perl executable." -$ echo "There is some performance overhead, however, so you" -$ echo "probably do not want to choose this unless you are going to be" -$ echo "doing things with embedded perl." -$ bool_dflt = "n" -$ if f$type(usemultiplicity) .nes. "" -$ then -$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y" -$ endif -$ rp = "Build Perl for multiplicity? [''bool_dflt'] " -$ GOSUB myread -$ IF ans -$ THEN -$ usemultiplicity="define" -$ ELSE -$ usemultiplicity="undef" -$ ENDIF $! -$! Ask if they want to build with 64-bit support -$ IF (archname.NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1") +$! Ask about threads, if appropriate +$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX" $ THEN -$ bool_dflt = "n" -$ IF F$TYPE(use64bitint) .NES. "" -$ THEN -$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y" -$ ENDIF $ echo "" -$ echo "You have natively 64-bit long integers." +$ echo "Perl can be built to take advantage of threads on some systems." +$ echo "To do so, configure.com can be run with -""Dusethreads""." $ echo "" -$ echo "Perl can be built to take advantage of 64-bit integer types" -$ echo "on some systems, To do so, Configure can be run with -Duse64bitint." -$ echo "Choosing this option will most probably introduce binary incompatibilities." -$ echo "" -$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." -$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] " -$ GOSUB myread -$ use64bitint = ans -$! -$ bool_dflt = "n" -$ IF F$TYPE(use64bitall) .NES. "" -$ THEN -$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y" -$ ENDIF -$ echo "" -$ echo "You may also choose to try maximal 64-bitness. It means using as much" -$ echo "64-bitness as possible on the platform. This in turn means even more" -$ echo "binary incompatibilities. On the other hand, your platform may not" -$ echo "have any more 64-bitness available than what you already have chosen." -$ echo "" -$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." -$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] " -$ GOSUB myread -$ use64bitall=ans -$ IF use64bitall .AND. .NOT. use64bitint -$ THEN -$ echo "" -$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on" -$ echo "the use of 64-bit integers." -$ use64bitint="Y" -$ ENDIF -$! -$ bool_dflt = use64bitall -$ IF F$TYPE(uselargefiles) .NES. "" -$ THEN -$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y" -$ ENDIF -$ echo "" -$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)" -$ echo "on some systems. To do so, Configure can be run with -Duselargefiles." -$ echo "" -$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." -$ rp = "Try to understand large files, if available? [''bool_dflt'] " -$ GOSUB myread -$ uselargefiles=ans -$! -$ bool_dflt = "n" -$ IF F$TYPE(uselongdouble) .NES. "" -$ THEN -$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y" -$ ENDIF -$ echo "" -$ echo "Perl can be built to take advantage of long doubles which" -$ echo "(if available) may give more accuracy and range for floating point numbers." -$ echo "" -$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." -$ rp = "Try to use long doubles, if available? [''bool_dflt'] " -$ GOSUB myread -$ uselongdouble = ans -$! -$ ENDIF ! not VAX && >= 7.1 -$! -$ IF usesitecustomize .OR. usesitecustomize .eqs. "define" -$ THEN -$ usesitecustomize = "define" -$ ELSE -$ usesitecustomize = "undef" -$ ENDIF -$! -$! Ask about threads, if appropriate -$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX" -$ THEN -$ echo "" -$ echo "Perl can be built to take advantage of threads on some systems." -$ echo "To do so, configure.com can be run with -""Dusethreads""." -$ echo "" -$ echo "Note that Perl built with threading support runs slightly slower" -$ echo "and uses more memory than plain Perl. The current implementation" -$ echo "is believed to be stable, but it is fairly new, and so should be" -$ echo "treated with caution." +$ echo "Note that Perl built with threading support runs slightly slower" +$ echo "and uses more memory than plain Perl. The current implementation" +$ echo "is believed to be stable, but it is fairly new, and so should be" +$ echo "treated with caution." $ echo "" $ bool_dflt = "n" $ if f$type(usethreads) .nes. "" @@ -2455,6 +2034,7 @@ $ rp = "Build a threading Perl? [''bool_dflt'] " $ GOSUB myread $ if ans $ THEN +$ usethreads = "define" $ use_threads="T" $ ! Shall we do the 5.005-type threads, or IThreads? $ echo "Since release 5.6, Perl has had two different threading implementations," @@ -2474,7 +2054,7 @@ $ if f$type(use5005threads) .nes. "" $ then $ if use5005threads .or. use5005threads .eqs. "define" then bool_dflt="n" $ endif -$ rp = "Use the newer intepreter-based ithreads? [''bool_dflt'] " +$ rp = "Use the newer interpreter-based ithreads? [''bool_dflt'] " $ GOSUB myread $ use_ithreads=ans $ if use_ithreads @@ -2503,7 +2083,7 @@ $ THEN $ thread_upcalls = "MTU=MTU=1" $ usethreadupcalls = "define" $ ! Are they on alpha or itanium? -$ IF (archname .NES. "VMS_VAX") .AND. ("''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.2") +$ IF (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") .AND. ("''f$extract(1,3, f$getsyi(""version""))'" .GES. "7.2") $ THEN $ echo "" $ echo "Threaded Perl can be linked to use multiple kernel threads on your system." @@ -2524,12 +2104,117 @@ $ ENDIF $ ENDIF $ ENDIF $ ENDIF +$ ELSE +$ usethreads = "undef" $ ENDIF $ ENDIF $ IF F$TYPE(usethreadupcalls) .EQS. "" THEN usethreadupcalls = "undef" $ IF F$TYPE(usekernelthreads) .EQS. "" THEN usekernelthreads = "undef" -$ IF archname .NES. "VMS_VAX" +$! +$! Ask if they want to build with MULTIPLICITY +$ echo "" +$ echo "Perl can be built so that multiple Perl interpreters can coexist" +$ echo "within the same Perl executable." +$ IF usethreads .OR. usethreads .EQS. "define" $ THEN +$ echo "This multiple interpreter support is required for interpreter-based threads." +$ usemultiplicity="define" +$ ELSE +$ bool_dflt = "n" +$ if f$type(usemultiplicity) .nes. "" +$ then +$ if usemultiplicity .or. usemultiplicity .eqs. "define" then bool_dflt = "y" +$ endif +$ rp = "Build Perl for multiplicity? [''bool_dflt'] " +$ GOSUB myread +$ IF ans +$ THEN +$ usemultiplicity="define" +$ ELSE +$ usemultiplicity="undef" +$ ENDIF +$ ENDIF +$! +$! Ask if they want to build with 64-bit support +$ IF (F$ELEMENT(0, "-", archname).NES."VMS_VAX").and.("''f$extract(1,3, f$getsyi(""version""))'".ges."7.1") +$ THEN +$ bool_dflt = "n" +$ IF F$TYPE(use64bitint) .NES. "" +$ THEN +$ IF use64bitint .OR. use64bitint .eqs. "define" THEN bool_dflt = "y" +$ ENDIF +$ echo "" +$ echo "You have natively 64-bit long integers." +$ echo "" +$ echo "Perl can be built to take advantage of 64-bit integer types" +$ echo "on some systems, To do so, Configure can be run with -Duse64bitint." +$ echo "Choosing this option will most probably introduce binary incompatibilities." +$ echo "" +$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." +$ rp = "Try to use 64-bit integers, if available? [''bool_dflt'] " +$ GOSUB myread +$ use64bitint = ans +$! +$ bool_dflt = "n" +$ IF F$TYPE(use64bitall) .NES. "" +$ THEN +$ IF use64bitall .OR. use64bitall .eqs. "define" THEN bool_dflt = "y" +$ ENDIF +$ echo "" +$ echo "You may also choose to try maximal 64-bitness. It means using as much" +$ echo "64-bitness as possible on the platform. This in turn means even more" +$ echo "binary incompatibilities. On the other hand, your platform may not" +$ echo "have any more 64-bitness available than what you already have chosen." +$ echo "" +$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." +$ rp = "Try to use maximal 64-bit support, if available? [''bool_dflt'] " +$ GOSUB myread +$ use64bitall=ans +$ IF use64bitall .AND. .NOT. use64bitint +$ THEN +$ echo "" +$ echo "Since you have chosen a maximally 64-bit build, I'm also turning on" +$ echo "the use of 64-bit integers." +$ use64bitint="Y" +$ ENDIF +$! +$ bool_dflt = use64bitall +$ IF F$TYPE(uselargefiles) .NES. "" +$ THEN +$ IF uselargefiles .OR. uselargefiles .eqs. "define" THEN bool_dflt = "y" +$ ENDIF +$ echo "" +$ echo "Perl can be built to understand large files (files larger than 2 gigabytes)" +$ echo "on some systems. To do so, Configure can be run with -Duselargefiles." +$ echo "" +$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." +$ rp = "Try to understand large files, if available? [''bool_dflt'] " +$ GOSUB myread +$ uselargefiles=ans +$! +$ bool_dflt = "n" +$ IF F$TYPE(uselongdouble) .NES. "" +$ THEN +$ IF uselongdouble .OR. uselongdouble .eqs. "define" THEN bool_dflt = "y" +$ ENDIF +$ echo "" +$ echo "Perl can be built to take advantage of long doubles which" +$ echo "(if available) may give more accuracy and range for floating point numbers." +$ echo "" +$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." +$ rp = "Try to use long doubles, if available? [''bool_dflt'] " +$ GOSUB myread +$ uselongdouble = ans +$! +$ ENDIF ! not VAX && >= 7.1 +$! +$ IF usesitecustomize .OR. usesitecustomize .eqs. "define" +$ THEN +$ usesitecustomize = "define" +$ ELSE +$ usesitecustomize = "undef" +$ ENDIF +$! $! Case sensitive? $ echo "" $ echo "By default, perl (and pretty much everything else on VMS) uses" @@ -2551,6 +2236,22 @@ $ endif $ rp = "Build with case-sensitive symbols? [''bool_dflt'] " $ GOSUB myread $ be_case_sensitive = ans +$! +$! Shortened symbols? +$ echo "" +$ echo "The VMS linker does not handle symbol names longer than 31 characters," +$ echo "but the compiler can shorten long symbols if requested." +$ bool_dflt = shorten_long_symbols +$ if f$type(useshortenedsymbols) .nes. "" +$ then +$ if useshortenedsymbols .or. useshortenedsymbols .eqs. "define" then bool_dflt = "y" +$ if f$extract(0,1,f$edit(useshortenedsymbols,"collapse,upcase")) .eqs. "N" .or. useshortenedsymbols .eqs. "undef" then bool_dflt = "n" +$ endif +$ rp = "Build with long symbols shortened? [''bool_dflt'] " +$ GOSUB myread +$ shorten_long_symbols = ans +$ IF F$ELEMENT(0, "-", archname) .NES. "VMS_VAX" +$ THEN $! IEEE math? $ echo "" $ echo "Perl normally uses IEEE format (T_FLOAT) floating point numbers on" @@ -2571,13 +2272,14 @@ $ rp = "Use IEEE math? [''bool_dflt'] " $ GOSUB myread $ use_ieee_math = ans $ ELSE -$ be_case_sensitive = "n" $ use_ieee_math = "n" $ ENDIF $ useieee = "undef" $ usecasesensitive = "undef" +$ useshortenedsymbols = "undef" $ if (use_ieee_math) then useieee = "define" $ if (be_case_sensitive) then usecasesensitive = "define" +$ if (shorten_long_symbols) then useshortenedsymbols = "define" $! Unlink all versions? $ echo "" $ echo "By default, Perl's unlink() provides VMS-like behavior and only" @@ -2616,54 +2318,431 @@ $ GOSUB myread $ IF ans .EQS. "none" THEN ans = "" $ user_c_flags = "''ans'" $! -$! Ask whether they want to use secure logical translation when tainting -$ echo "" -$ echo "As Perl starts up, it checks several logical names, such as" -$ echo "PERL5LIB and PERL_ENV_TABLES, which allow you to modify aspects" -$ echo "of its behavior. For additional security, you may limit this" -$ echo "process to executive- and kernel-mode translation when tainting" -$ echo "is enabled. In this case, logical names normally skipped when" -$ echo "tainting is enabled (e.g. PERL5OPTS) are translated as well." -$ echo "If you do not choose to do this, the usual order of access modes" -$ echo "is used for logical name translation." -$ echo "" -$ echo "This restriction does not apply to the %ENV hash or to implicit" -$ echo "logical name translation during parsing of file specifications;" -$ echo "these always use the normal sequence of access modes for logical" -$ echo "name translation." -$ bool_dflt = "y" -$ if f$type(usesecurelog) .nes. "" -$ then -$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n" -$ endif -$ rp = "Use secure logical name translation? [''bool_dflt'] " -$ GOSUB myread -$ d_secintgenv = ans -$ usesecurelog = "undef" -$ if (d_secintgenv) then usesecurelog = "define" +$! Ask whether they want to use secure logical translation when tainting +$ echo "" +$ echo "As Perl starts up, it checks several logical names, such as" +$ echo "PERL5LIB and PERL_ENV_TABLES, which allow you to modify aspects" +$ echo "of its behavior. For additional security, you may limit this" +$ echo "process to executive- and kernel-mode translation when tainting" +$ echo "is enabled. In this case, logical names normally skipped when" +$ echo "tainting is enabled (e.g. PERL5OPTS) are translated as well." +$ echo "If you do not choose to do this, the usual order of access modes" +$ echo "is used for logical name translation." +$ echo "" +$ echo "This restriction does not apply to the %ENV hash or to implicit" +$ echo "logical name translation during parsing of file specifications;" +$ echo "these always use the normal sequence of access modes for logical" +$ echo "name translation." +$ bool_dflt = "y" +$ if f$type(usesecurelog) .nes. "" +$ then +$ if f$extract(0,1,f$edit(usesecurelog,"collapse,upcase")).eqs."N" .or. usesecurelog .eqs. "undef" then bool_dflt = "n" +$ endif +$ rp = "Use secure logical name translation? [''bool_dflt'] " +$ GOSUB myread +$ d_secintgenv = ans +$ usesecurelog = "undef" +$ if (d_secintgenv) then usesecurelog = "define" +$! +$! Ask whether they want to default filetypes +$ echo "" +$ echo "When you pass the name of a program to Perl on the command line," +$ echo "it generally doesn't supply any defaults unless the -S command" +$ echo "line switch is specified. In keeping with the VMS tradition of" +$ echo "default file types, however, you can configure Perl to try default" +$ echo "file types of nothing, .pl, and .com, in that order (e.g. typing" +$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and" +$ echo "finally foo.com)." +$ echo "" +$ echo "This is currently broken in some configurations. Only enable it if" +$ echo "you know what you are doing." +$ bool_dflt = "n" +$ if f$type(usedefaulttypes) .nes. "" +$ then +$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y" +$ endif +$ rp = "Always use default file types? [''bool_dflt'] " +$ GOSUB myread +$ d_alwdeftype = ans +$ usedefaulttypes = "undef" +$ if (d_alwdeftype) then usedefaulttypes = "define" +$! +$ dflt = archname +$ rp = "What is your architecture name? [''archname'] " +$ GOSUB myread +$ IF ans.NES."" +$ THEN +$ ans = F$EDIT(ans,"COLLAPSE, UPCASE") +$ IF (ans.NES.archname) !.AND.knowitall +$ THEN +$ echo4 "I'll go with ''archname' anyway..." +$ ENDIF +$ ENDIF +$! +$ bool_dflt = "n" +$ if f$type(useversionedarchname) .nes. "" +$ then +$ if useversionedarchname .or. useversionedarchname .eqs. "define" then bool_dflt = "y" +$ endif +$ rp = "Add the Perl API version to your archname? [''bool_dflt'] " +$ GOSUB myread +$ IF ans +$ THEN +$ useversionedarchname = "define" +$ IF F$LOCATE("-''version'", archname) .EQ. F$LENGTH(archname) +$ THEN +$ archname = "''archname'-''version'" +$ echo4 "...setting architecture name to ''archname'." +$ ELSE +$ echo4 "...and architecture name already has -''version'." +$ ENDIF +$ ELSE +$ useversionedarchname = "undef" +$ ENDIF +$! +$ IF usethreads .OR. usethreads .EQS. "define" +$ THEN +$ echo4 "Threads selected." +$ IF F$LOCATE("-thread", archname) .EQ. F$LENGTH(archname) +$ THEN +$ archname = "''archname'-thread" +$ echo4 "...setting architecture name to ''archname'." +$ ELSE +$ echo4 "...and architecture name already has -thread." +$ ENDIF +$ ENDIF +$! +$ IF usemultiplicity .OR. usemultiplicity .EQS. "define" +$ THEN +$ echo4 "Multiplicity selected." +$ IF F$LOCATE("-multi", archname) .EQ. F$LENGTH(archname) +$ THEN +$ archname = "''archname'-multi" +$ echo4 "...setting architecture name to ''archname'." +$ ELSE +$ echo4 "...and architecture name already has -multi." +$ ENDIF +$ ENDIF +$! +$ IF uselongdouble .OR. uselongdouble .EQS. "define" +$ THEN +$ echo4 "Long doubles selected." +$ IF F$LOCATE("-ld", archname) .EQ. F$LENGTH(archname) +$ THEN +$ archname = "''archname'-ld" +$ echo4 "...setting architecture name to ''archname'." +$ ELSE +$ echo4 "...and architecture name already has -ld." +$ ENDIF +$ ENDIF +$! +$ bool_dflt = "n" +$ vms_prefix = "perl_root" +$ vms_prefixup = F$EDIT(vms_prefix,"UPCASE") +$ rp = "Will you be sharing your ''vms_prefixup' with ''otherarch'? [''bool_dflt'] " +$ GOSUB myread +$ IF .NOT. ans +$ THEN +$ sharedperl = "N" +$ ELSE +$ sharedperl = "Y" +$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_AXP") +$ THEN +$ macros = macros + """AXE=1""," +$ ENDIF +$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_IA64") +$ THEN +$ macros = macros + """IXE=1""," +$ ENDIF +$ ENDIF +$! +$!: is AFS running? !sfn +$!: decide how portable to be. Allow command line overrides. !sfn +$!: set up shell script to do ~ expansion !sfn +$!: expand filename !sfn +$!: now set up to get a file name !sfn +$! +$ IF F$TYPE(prefix) .EQS. "" +$ THEN +$ prefix = F$ENVIRONMENT("DEFAULT") - ".UU]" + "]" +$ prefix = F$PARSE(prefix,,,,"NO_CONCEAL") - "][" - "000000." - ".000000" - ".;" +$ prefixbase = prefix - "]" +$! Add _ROOT to make install PERL_ROOT differ from build directory. +$ prefix = prefixbase + "_ROOT.]" +$ ENDIF +$ ! more redundant scrubbing of values +$ prefix = prefix - "000000." +$ IF F$LOCATE(".]",prefix) .EQ. F$LENGTH(prefix) THEN prefix = prefix - "]" + ".]" +$ src = prefix +$!: determine root of directory hierarchy where package will be installed. +$ dflt = prefix +$ IF .NOT.silent +$ THEN +$ echo "" +$ echo "By default, ''package' will be installed in ''dflt', pod" +$ echo "pages under ''prefixbase'.LIB.POD], etc..., i.e. with ''dflt' as prefix for" +$ echo "all installation directories." +$ echo "On ''osname' the prefix is used to DEFINE the ''vms_prefixup' prior to installation" +$ echo "as well as during subsequent use of ''package' via ''packageup'_SETUP.COM." +$ ENDIF +$ rp = "Installation prefix to use (for ''vms_prefixup')? [ ''dflt' ] " +$ GOSUB myread +$ IF ans.NES."" +$ THEN +$ prefix = ans +$ IF F$LOCATE(".]",ans) .EQ. F$LENGTH(ans) THEN prefix = prefix - "]" + ".]" +$ ELSE +$ prefix = dflt +$ ENDIF +$ perl_root = prefix +$! +$! Check here for pre-existing PERL_ROOT. +$! -> ask if removal desired. +$! Check here for writability of requested PERL_ROOT if it is not the default (cwd). +$! -> recommend letting PERL_ROOT be PERL_SRC if requested PERL_ROOT is not writable. +$! +$ tmp = perl_root - ".]" + "]" +$ dflt = f$parse(tmp,,,,) +$ IF dflt .eqs. "" +$ THEN +$ echo4 "''tmp' does not yet exist." +$! create/directory 'tmp' +$ ELSE +$ echo4 "''tmp' already exists." +$ ENDIF +$! +$ vms_skip_install = "true" +$ bool_dflt = "y" +$! echo "" +$ rp = "Skip the remaining """"where install"""" questions? [''bool_dflt'] " +$ GOSUB myread +$ IF (.NOT.ans) THEN vms_skip_install = "false" +$ IF (.NOT.vms_skip_install) +$ THEN +$! +$!: set the prefixit variable, to compute a suitable default value +$! +$!: determine where private library files go +$!: Usual default is /usr/local/lib/perl5. Also allow things like +$!: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant. +$ IF .NOT.silent +$ THEN +$ TYPE SYS$INPUT: +$ DECK + +There are some auxiliary files for perl5 that need to be put into a +private library directory that is accessible by everyone. +$ EOD +$ ENDIF +$ IF F$TYPE(privlib) .NES. "" +$ THEN dflt = privlib +$ ELSE dflt = "''vms_prefix':[lib]" +$ ENDIF +$ rp = "Pathname where the private library files will reside? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ privlib = ans +$! +$ ENDIF !%Config-I-VMS, skip remaining "where install" questions +$! +$ IF F$TYPE(perl_symbol) .EQS. "" THEN perl_symbol := true +$ IF F$TYPE(perl_verb) .EQS. "" THEN perl_verb = "" +$ IF perl_symbol +$ THEN bool_dflt = "y" +$ ELSE bool_dflt = "n" +$ ENDIF +$ IF .NOT.silent +$ THEN +$ echo "" +$ echo "You may choose to write ''packageup'_SETUP.COM to assign a foreign" +$ echo "symbol to invoke ''package', which is the usual method." +$ echO "If you do not do so then you would need a DCL command verb at the" +$ echo "process or the system wide level." +$ ENDIF +$ rp = "Invoke perl as a global symbol foreign command? [''bool_dflt'] " +$ GOSUB myread +$ IF (.NOT.ans) THEN perl_symbol = "false" +$! +$ IF (.NOT.perl_symbol) +$ THEN +$ IF perl_verb .EQS. "DCLTABLES" +$ THEN bool_dflt = "n" +$ ELSE bool_dflt = "y" +$ ENDIF +$ IF .NOT.silent +$ THEN +$ echo "" +$ echo "Since you won't be using a symbol you must choose to put the ''packageup'" +$ echo "verb in a per-process table or in the system wide DCLTABLES (which" +$ echo "would require write privilege)." +$ ENDIF +$ rp = "Invoke perl as a per process command verb? [ ''bool_dflt' ] " +$ GOSUB myread +$ IF (.NOT.ans) +$ THEN perl_verb = "DCLTABLES" +$ ELSE perl_verb = "PROCESS" +$ ENDIF +$ ENDIF ! (.NOT.perl_symbol) +$! +$ IF (.NOT.vms_skip_install) +$ THEN +$!: set the prefixup variable, to restore leading tilde escape !sfn +$! +$!: determine where public architecture dependent libraries go +$ IF (.NOT.silent) +$ THEN +$ echo "" +$ echo "''package' contains architecture-dependent library files. If you are" +$ ENDIF +$ IF (.NOT.silent) +$ THEN +$ TYPE SYS$INPUT: +$ DECK +sharing libraries in a heterogeneous environment, you might store +these files in a separate location. Otherwise, you can just include +them with the rest of the public library files. +$ EOD +$ ENDIF +$ IF F$TYPE(archlib) .NES. "" +$ THEN dflt = archlib +$ ELSE dflt = privlib - "]" + "." + archname + "." + version + "]" +$ ENDIF +$ rp = "Where do you want to put the public architecture-dependent libraries? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ archlib = ans +$! +$ ENDIF !%Config-I-VMS, skip "where install" questions +$ IF (.NOT.vms_skip_install) +$ THEN +$!: it so happens the Eunice I know will not run shell scripts in Unix format +$! +$!: see if setuid scripts can be secure !sfn +$!: now see if they want to do setuid emulation !sfn +$! +$!: determine where site specific libraries go. +$ IF .NOT.silent +$ THEN +$ TYPE SYS$INPUT: +$ DECK + +The installation process will also create a directory for +site-specific extensions and modules. Some users find it convenient +to place all local files in this directory rather than in the main +distribution directory. +$ EOD +$ ENDIF +$ IF F$TYPE(sitelib) .NES. "" +$ THEN dflt = sitelib +$ ELSE dflt = privlib - "]" + ".SITE_PERL]" +$ ENDIF +$ rp = "Pathname for the site-specific library files? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ sitelib = ans +$! +$!: determine where site specific architecture-dependent libraries go. +$ IF .NOT.silent +$ THEN TYPE SYS$INPUT: +$ DECK + +The installation process will also create a directory for +architecture-dependent site-specific extensions and modules. +$ EOD +$ ENDIF +$ IF F$TYPE(sitearch) .NES. "" +$ THEN dflt = sitearch +$ ELSE dflt = sitelib - "]" + "." + archname + "]" +$ ENDIF +$ rp = "Pathname for the site-specific architecture-dependent library files? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ sitearch = ans +$! +$!: determine where old public architecture dependent libraries might be +$! +$!: determine where public executables go +$ IF F$TYPE(bin) .NES. "" +$ THEN dflt = bin +$! ELSE dflt = prefix - ".]" + ".BIN]" +$ ELSE dflt = "/''vms_prefix'" +$ ENDIF +$ rp = "Pathname where the public executables will reside? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ bin = ans +$! +$!: determine where add-on public executables go +$ IF F$TYPE(sitebin) .NES. "" +$ THEN dflt = sitebin +$ ELSE dflt = "''vms_prefix':[bin.''archname']" +$ ENDIF +$ rp = "Pathname where the add-on public executables should be installed? " +$ rp = F$FAO("!AS!/!AS",rp,"[ ''dflt' ] ") +$ GOSUB myread +$ sitebin = ans +$! +$!: determine where manual pages are on this system +$!: What suffix to use on installed man pages +$!: see if we can have long filenames +$!: determine where library module manual pages go +$!: What suffix to use on installed man pages +$!: see what memory models we can support +$! +$ ELSE ! skipping "where install" questions, we must set some symbols +$ IF F$TYPE(archlib).EQS."" THEN - + archlib="''vms_prefix':[lib.''archname'.''version']" +$ IF F$TYPE(bin) .EQS. "" THEN - + bin="/''vms_prefix'" +$ IF F$TYPE(privlib) .EQS. "" THEN - + privlib ="''vms_prefix':[lib]" +$ IF F$TYPE(sitearch) .EQS. "" THEN - + sitearch="''vms_prefix':[lib.site_perl.''archname']" +$ IF F$TYPE(sitelib) .EQS. "" THEN - + sitelib ="''vms_prefix':[lib.site_perl]" +$ IF F$TYPE(sitebin) .EQS. "" THEN - + sitebin="''vms_prefix':[bin.''archname']" +$ ENDIF !%Config-I-VMS, skip "where install" questions +$! +$! These derived locations can be set whether we've opted to +$! skip the where install questions or not. $! -$! Ask whether they want to default filetypes -$ echo "" -$ echo "When you pass the name of a program to Perl on the command line," -$ echo "it generally doesn't supply any defaults unless the -S command" -$ echo "line switch is specified. In keeping with the VMS tradition of" -$ echo "default file types, however, you can configure Perl to try default" -$ echo "file types of nothing, .pl, and .com, in that order (e.g. typing" -$ echo """$ perl foo"" would cause Perl to look for foo., then foo.pl, and" -$ echo "finally foo.com)." -$ echo "" -$ echo "This is currently broken in some configurations. Only enable it if" -$ echo "you know what you are doing." -$ bool_dflt = "n" -$ if f$type(usedefaulttypes) .nes. "" -$ then -$ if usedefaulttypes .or. usedefaulttypes .eqs. "define" then bool_dflt="y" -$ endif -$ rp = "Always use default file types? [''bool_dflt'] " -$ GOSUB myread -$ d_alwdeftype = ans -$ usedefaulttypes = "undef" -$ if (d_alwdeftype) then usedefaulttypes = "define" +$ IF F$TYPE(archlibexp) .EQS. "" THEN - + archlibexp="''vms_prefix':[lib.''archname'.''version']" +$ IF F$TYPE(binexp) .EQS. "" THEN - + binexp ="''vms_prefix':[000000]" +$ IF F$TYPE(builddir) .EQS. "" THEN - + builddir ="''vms_prefix':[000000]" +$ IF F$TYPE(installarchlib) .EQS. "" THEN - + installarchlib="''vms_prefix':[lib.''archname'.''version']" +$ IF F$TYPE(installbin) .EQS. "" THEN - + installbin ="''vms_prefix':[000000]" +$ IF F$TYPE(installscript) .EQS. "" THEN - + installscript ="''vms_prefix':[utils]" +$ IF F$TYPE(installman1dir) .EQS. "" THEN - + installman1dir ="''vms_prefix':[man.man1]" +$ IF F$TYPE(installman3dir) .EQS. "" THEN - + installman3dir ="''vms_prefix':[man.man3]" +$ IF F$TYPE(installprivlib) .EQS. "" THEN - + installprivlib ="''vms_prefix':[lib]" +$ IF F$TYPE(installsitearch) .EQS. "" THEN - + installsitearch="''vms_prefix':[lib.site_perl.''archname']" +$ IF F$TYPE(installsitelib) .EQS. "" THEN - + installsitelib ="''vms_prefix':[lib.site_perl]" +$ IF F$TYPE(oldarchlib) .EQS. "" THEN - + oldarchlib="''vms_prefix':[lib.''archname']" +$ IF F$TYPE(oldarchlibexp) .EQS. "" THEN - + oldarchlibexp="''vms_prefix':[lib.''archname']" +$ IF F$TYPE(privlibexp) .EQS. "" THEN - + privlibexp ="''vms_prefix':[lib]" +$ IF F$TYPE(scriptdir) .EQS. "" THEN - + scriptdir ="''vms_prefix':[utils]" +$ IF F$TYPE(sitearchexp) .EQS. "" THEN - + sitearchexp ="''vms_prefix':[lib.site_perl.''archname']" +$ IF F$TYPE(sitelib_stem) .EQS. "" THEN - + sitelib_stem ="''vms_prefix':[lib.site_perl]" +$ IF F$TYPE(sitelibexp) .EQS. "" THEN - + sitelibexp ="''vms_prefix':[lib.site_perl]" $! $! determine whether to use malloc wrapping $ echo "" @@ -2837,7 +2916,7 @@ $ dflt = dflt - "IPC/SysV" ! needs to be ported $ dflt = dflt - "NDBM_File" ! needs porting/special library $ dflt = dflt - "ODBM_File" ! needs porting/special library $ dflt = dflt - "Sys/Syslog" ! needs porting/special library "GDBM_File macro LOG_DEBUG" -$ IF .NOT. Has_socketshr .AND. .NOT. Has_Dec_C_Sockets +$ IF .NOT. Has_Dec_C_Sockets $ THEN $ dflt = dflt - "Socket" ! optional on VMS $ ENDIF @@ -3022,15 +3101,30 @@ $ IF use_ieee_math $ THEN $ extra_flags = "''extra_flags'" + "/float=ieee/ieee=denorm" $ ELSE -$ IF (archname.EQS."VMS_IA64") +$ IF (F$ELEMENT(0, "-", archname).EQS."VMS_IA64") $ THEN $ extra_flags = "''extra_flags'" + "/float=g_float" $ ENDIF $ ENDIF +$ names_flags = "" $ IF be_case_sensitive $ THEN -$ extra_flags = "''extra_flags'" + "/Names=As_Is" +$ names_flags = "AS_IS" +$ ENDIF +$ IF shorten_long_symbols +$ THEN +$ IF be_case_sensitive +$ THEN +$ names_flags = "''names_flags',SHORTENED" +$ ELSE +$ names_flags = "SHORTENED" +$ ENDIF +$ ENDIF +$ IF F$LENGTH(names_flags) .ne. 0 +$ THEN +$ extra_flags = "''extra_flags'" + "/NAMES=(''names_flags')" $ ENDIF +$ DELETE/SYMBOLS names_flags $ extra_flags = "''extra_flags'" + "''user_c_flags'" $! $ min_pgflquota = "100000" @@ -3048,37 +3142,6 @@ $ GOTO Clean_up $ ENDIF $ ENDIF $! -$! PerlIO abstraction -$! -$ bool_dflt = "y" -$ IF F$TYPE(useperlio) .NES. "" -$ then -$ if .not. useperlio .or. useperlio .eqs. "undef" then bool_dflt = "n" -$ endif -$ IF .NOT. silent -$ THEN -$ echo "Previous versions of ''package' used the standard IO mechanisms as" -$ TYPE SYS$INPUT: -$ DECK -defined in . Versions 5.003_02 and later of perl allow -alternate IO mechanisms via the PerlIO abstraction layer, but the -stdio mechanism is still available if needed. The abstraction layer -can use AT&T's sfio (if you already have sfio installed) or regular stdio. -Using PerlIO with sfio may cause problems with some extension modules. - -$ EOD -$ echo "If this does not make any sense to you, just accept the default '" + bool_dflt + "'." -$ ENDIF -$ rp = "Use the PerlIO abstraction layer? [''bool_dflt'] " -$ GOSUB myread -$ IF ans -$ THEN -$ useperlio = "define" -$ ELSE -$ echo "Ok, doing things the stdio way." -$ useperlio = "undef" -$ ENDIF -$! $ echo "" $ echo4 "Checking the C run-time library." $! @@ -3155,6 +3218,12 @@ $ d_vms_be_case_sensitive = "define" $ ELSE $ d_vms_be_case_sensitive = "undef" $ ENDIF +$ IF shorten_long_symbols +$ THEN +$ d_vms_shorten_long_symbols = "define" +$ ELSE +$ d_vms_shorten_long_symbols = "undef" +$ ENDIF $! Some constant defaults. $ hwname = f$getsyi("HW_NAME") $ myname = myhostname @@ -3190,13 +3259,19 @@ $ THEN $ uselongdouble = "define" $ alignbytes="16" $ nveformat="""Le""" +$ nvEUformat="""LE""" $ nvfformat="""Lf""" +$ nvFUformat="""LF""" $ nvgformat="""Lg""" +$ nvGUformat="""LG""" $ ELSE $ uselongdouble = "undef" $ nveformat="""e""" +$ nvEUformat="""E""" $ nvfformat="""f""" +$ nvFUformat="""F""" $ nvgformat="""g""" +$ nvGUformat="""G""" $ ENDIF $ IF use64bitall .OR. use64bitall .EQS. "define" $ THEN @@ -3216,7 +3291,7 @@ $ if mymalloc then usemymalloc = "define" $! $ perl_cc=Mcc $! -$ IF (sharedperl .AND. archname .EQS. "VMS_AXP") +$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP") $ THEN $ obj_ext=".abj" $ so="axe" @@ -3224,7 +3299,7 @@ $ dlext="axe" $ exe_ext=".axe" $ lib_ext=".alb" $ ELSE -$ IF (sharedperl .AND. archname .EQS. "VMS_IA64") +$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_IA64") $ THEN $ obj_ext=".ibj" $ so="ixe" @@ -3260,12 +3335,7 @@ $ usedl="define" $ startperl="""$ perl 'f$env(\""procedure\"")' \""'"+"'p1'\"" \""'"+"'p2'\"" \""'"+"'p3'\"" \""'"+"'p4'\"" \""'"+"'p5'\"" \""'"+"'p6'\"" \""'"+"'p7'\"" \""'"+"'p8'\""!\n" $ startperl=startperl + "$ exit++ + ++$status!=0 and $exit=$status=undef; while($#ARGV != -1 and $ARGV[$#ARGV] eq '"+"'){pop @ARGV;}""" $! -$ IF ((use_threads) .AND. (vms_ver .LES. "6.2")) -$ THEN -$ libs="SYS$SHARE:CMA$LIB_SHR.EXE/SHARE SYS$SHARE:CMA$RTL.EXE/SHARE SYS$SHARE:CMA$OPEN_LIB_SHR.exe/SHARE SYS$SHARE:CMA$OPEN_RTL.exe/SHARE" -$ ELSE -$ libs=" " -$ ENDIF +$ libs=" " $ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX" $ THEN $ libc="(DECCRTL)" @@ -3278,9 +3348,10 @@ $! $ perllibs=libs $! $! -$ IF archname .NES. "VMS_VAX" +$ IF F$ELEMENT(0, "-", archname) .NES. "VMS_VAX" $ THEN $ d_PRId64 = "define" +$ d_PRIi64 = "define" $ d_PRIu64 = "define" $ d_PRIo64 = "define" $ d_PRIx64 = "define" @@ -3301,6 +3372,7 @@ $ d_modfl = "define" $ d_modflproto = "define" $ ELSE $ d_PRId64 = "undef" +$ d_PRIi64 = "undef" $ d_PRIXU64 = "undef" $ d_PRIu64 = "undef" $ d_PRIo64 = "undef" @@ -3336,15 +3408,11 @@ $ IF use_threads $ THEN $ IF use_5005_threads $ THEN -$ arch = "''arch'-thread" -$ archname = "''archname'-thread" $ d_old_pthread_create_joinable = "undef" $ old_pthread_create_joinable = " " $ use5005threads = "define" $ useithreads = "undef" $ ELSE -$ arch = "''arch'-ithread" -$ archname = "''archname'-ithread" $ d_old_pthread_create_joinable = "undef" $ old_pthread_create_joinable = " " $ use5005threads = "undef" @@ -3511,6 +3579,8 @@ $ WS "int main()" $ WS "{" $ WS "#ifdef __STDC__" $ WS "printf(""42\n"");" +$ WS "#elif defined (__STD_ANSI)" ! for CXX +$ WS "printf(""42\n"");" $ WS "#else" $ WS "printf(""1\n"");" $ WS "#endif" @@ -3521,8 +3591,8 @@ $ GOSUB compile $ cpp_stuff=tmp $ IF F$INTEGER(tmp) .eq. 42 $ THEN -$ echo4 "Your C compiler and pre-processor defines the symbol:" -$ echo4 "__STDC__" +$ echo4 "Oh! Smells like ANSI's been here." +$ echo "We can catify or stringify, separately or together!" $ ENDIF $! $! Check for double size @@ -3727,7 +3797,7 @@ $ i_socks = tmp $! $! Check the prototype for select $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" @@ -3736,13 +3806,8 @@ $ WS "#endif" $ WS "#include " $ WS "#include " $ IF i_unistd .EQS. "define" THEN WS "#include " -$ IF Has_Socketshr -$ THEN -$ WS "#include " -$ ELSE -$ WS "#include " -$ WS "#include " -$ ENDIF +$ WS "#include " +$ WS "#include " $ WS "int main()" $ WS "{" $ WS "fd_set *foo;" @@ -3776,10 +3841,6 @@ $ WS "#include " $ WS "#endif" $ WS "#include " $ WS "#include " -$ IF Has_Socketshr -$ THEN -$ WS "#include " -$ ENDIF $ IF Has_Dec_C_Sockets $ THEN $ WS "#include " @@ -3962,7 +4023,7 @@ $ ENDIF $! $! Check to see if gethostname exists $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" @@ -3970,13 +4031,8 @@ $ WS "#include " $ WS "#endif" $ WS "#include " $ WS "#include " -$ IF Has_Socketshr -$ THEN -$ WS "#include " -$ ELSE -$ WS "#include " -$ WS "#include " -$ ENDIF +$ WS "#include " +$ WS "#include " $ WS "int main()" $ WS "{" $ WS "char name[100];" @@ -4142,7 +4198,7 @@ $ WS "#include " $ WS "int main()" $ WS "{" $ WS "char * place;" -$ WS "place = memchr(""foo"", 47, 3);" +$ WS "place = (char *)memchr(""foo"", 47, 3);" $ WS "exit(0);" $ WS "}" $ CS @@ -4436,18 +4492,12 @@ $! THEN dflt = "y" $! ELSE dflt = "n" $! ENDIF $! echo "''package' can use the sfio library, but it is experimental." -$! IF useperlio .EQS. "undef" -$! THEN -$! echo "For sfio also the PerlIO abstraction layer is needed." -$! echo "Earlier you said you would not want that." -$! ENDIF $! rp="You seem to have sfio available, do you want to try using it? [''dflt'] " $! GOSUB myread $! IF ans .EQS. "" THEN ans = dflt $! IF ans $! THEN -$! echo "Ok, turning on both sfio and PerlIO, then." -$! useperlio="define" +$! echo "Ok, turning on sfio then." $! val="define" $! ELSE $! echo "Ok, avoiding sfio this time. I'll use stdio instead." @@ -4498,7 +4548,7 @@ $ d_setproctitle = tmp $! $! Check for $! -$ IF Has_Dec_C_Sockets .or. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ tmp = "netinet/in.h" $ GOSUB inhdr @@ -4509,7 +4559,7 @@ $ ENDIF $! $! Check for $! -$ IF Has_Dec_C_Sockets .or. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ tmp = "netinet/tcp.h" $ GOSUB inhdr @@ -4520,17 +4570,14 @@ $ ENDIF $! $! Check for endhostent $! -$ IF Has_Dec_C_Sockets .or. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "endhostent();" @@ -4546,17 +4593,14 @@ $ ENDIF $! $! Check for endnetent $! -$ IF Has_Dec_C_Sockets .or. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "endnetent();" @@ -4572,17 +4616,14 @@ $ ENDIF $! $! Check for endprotoent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "endprotoent();" @@ -4598,17 +4639,14 @@ $ ENDIF $! $! Check for endservent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "endservent();" @@ -4624,17 +4662,14 @@ $ ENDIF $! $! Check for sethostent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "sethostent(1);" @@ -4650,17 +4685,14 @@ $ ENDIF $! $! Check for setnetent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "setnetent(1);" @@ -4676,17 +4708,14 @@ $ ENDIF $! $! Check for setprotoent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "setprotoent(1);" @@ -4702,17 +4731,14 @@ $ ENDIF $! $! Check for setservent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "setservent(1);" @@ -4728,17 +4754,14 @@ $ ENDIF $! $! Check for gethostent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "gethostent();" @@ -4754,17 +4777,14 @@ $ ENDIF $! $! Check for getnetent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "getnetent();" @@ -4780,17 +4800,14 @@ $ ENDIF $! $! Check for getprotoent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "getprotoent();" @@ -4806,17 +4823,14 @@ $ ENDIF $! $! Check for getservent $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ OS $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "getservent();" @@ -4830,6 +4844,70 @@ $ ELSE $ d_getsent="undef" $ ENDIF $! +$! +$! Check for sa_len +$! +$ echo4 "Checking the availability of sa_len in the sockaddr struct ..." +$ IF Has_Dec_C_Sockets +$ THEN +$ OS +$ WS "#if defined(__DECC) || defined(__DECCXX)" +$ WS "#include " +$ WS "#endif" +$ WS "#define _SOCKADDR_LEN" +$ WS "#include " +$ WS "#include " +$ WS "#include " +$ WS "int main() {" +$ WS "struct sockaddr sa;" +$ WS "memset((char *)&sa, 0, sizeof(sa));" +$ WS "return (sa.sa_len);" +$ WS "}" +$ CS +$ GOSUB compile_ok +$ IF compile_status .EQ. good_compile +$ THEN +$ d_sockaddr_sa_len="define" +$ echo "You have sa_len in the sockaddr struct." +$ ELSE +$ d_sockaddr_sa_len="undef" +$ echo "You do not have sa_len in the sockaddr struct." +$ ENDIF +$ ELSE +$ d_sockaddr_sa_len="undef" +$ echo "You do not have sa_len in the sockaddr struct." +$ ENDIF +$! +$! Check for sin6_scope_id +$! +$ echo4 "Checking the availability of sin6_scope_id in the struct sockaddr_in6 ..." +$ IF Has_Dec_C_Sockets +$ THEN +$ OS +$ WS "#include " +$ WS "#include " +$ WS "#include " +$ WS "#include " +$ WS "int main() {" +$ WS "struct sockaddr_in6 sin6;" +$ WS "memset((char *)&sin6, 0, sizeof(sin6));" +$ WS "return (sin6.sin6_scope_id);" +$ WS "}" +$ CS +$ GOSUB compile_ok +$ IF compile_status .EQ. good_compile +$ THEN +$ d_sin6_scope_id="define" +$ echo "You have sin6_scope_id in the sockaddr_in6 struct." +$ ELSE +$ d_sin6_scope_id="undef" +$ echo "You do not have sin6_scope_id in the sockaddr_in6 struct." +$ ENDIF +$ ELSE +$ d_sin6_scope_id="undef" +$ echo "You do not have sin6_scope_id in the sockaddr_in6 struct." +$ ENDIF +$! $! Check for nanosleep $! $ OS @@ -4849,7 +4927,7 @@ $ d_nanosleep = tmp $! $! Check for socklen_t $! -$ IF Has_Dec_C_Sockets .OR. Has_Socketshr +$ IF Has_Dec_C_Sockets $ THEN $ echo4 "Checking to see if you have socklen_t..." $ OS @@ -4857,10 +4935,7 @@ $ WS "#if defined(__DECC) || defined(__DECCXX)" $ WS "#include " $ WS "#endif" $ WS "#include " -$ IF Has_Socketshr -$ THEN WS "#include " -$ ELSE IF i_netdb .EQS. "define" THEN WS "#include " -$ ENDIF +$ IF i_netdb .EQS. "define" THEN WS "#include " $ WS "int main()" $ WS "{" $ WS "socklen_t x = 16;" @@ -4992,6 +5067,33 @@ $ echo4 "I'm disabling large file support." $ uselargefiles = "undef" $ ENDIF $! +$! Check for st_ino size. +$! +$ st_ino_size = 4 +$ OS +$ WS "#include " +$ WS "#include " +$ WS "#if defined(__DECC) || defined(__DECCXX)" +$ WS "#include +$ WS "#endif" +$ WS "int main() { +$ WS "#''uselargefiles' _LARGEFILE" +$ WS "#ifdef _LARGEFILE" +$ WS " printf(""%d\n"", sizeof(__ino64_t));" +$ WS "#else" +$ WS " printf(""%d\n"", sizeof(unsigned short)*3);" +$ WS "#endif" +$ WS " exit(0);" +$ WS "}" +$ CS +$ GOSUB link_ok +$ IF link_status .EQ. good_link +$ THEN +$ GOSUB just_mcr_it +$ st_ino_size = tmp +$ ENDIF +$ echo "Your st_ino size is ''st_ino_size' bytes." +$! $! Tests for hard link, symbolic links, and 7.3 + CRTL features $! $ d_lchown = "undef" @@ -5006,7 +5108,7 @@ $! easy to use DCL test to see if hardlinks are enabled on the build $! disk. That would require more work to test, and I am only testing $! this on 8.2, so that is why the 8.2 test. $! -$ IF (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ THEN $ IF f$getdvi("SYS$DISK","HARDLINKS_SUPPORTED") $ THEN @@ -5024,15 +5126,14 @@ $ ENDIF $! $ IF uselargefiles .OR. uselargefiles .eqs. "define" $ THEN -$ IF (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ THEN $ echo4 "Largefile support enabled, so enabling standard stat support too." $ usestdstat = "y" $ echo4 - "Looking for the realpath() function to indicate symbolic link support..." $ OS -$! WS "#include " -$ WS "void exit(int foo);" +$ WS "#include " $ WS "char *realpath(const char *file_name, char * resolved_name, ...);" $ WS "int main()" $ WS "{" @@ -5066,7 +5167,7 @@ $ echo4 "Your system does not support symbolic links." $ echo4 "I am disabling symbolic link support." $ ENDIF $ ELSE -$ IF (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$ IF (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ THEN $ echo4 "-Duselargefiles is required for symbolic link support." $ echo4 "You did not specify that, so I am disabling symbolic link support." @@ -5100,7 +5201,7 @@ $ d_ttyname_r = "undef" $ ttyname_r_proto = "0" $ d_snprintf = "undef" $ d_vsnprintf = "undef" -$ if (vms_ver .GES. "7.3-2") .AND. (archname .NES. "VMS_VAX") +$ if (vms_ver .GES. "7.3-2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ then $ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with V7.3-2 routines" $ d_getgrgid_r = "define" @@ -5134,7 +5235,7 @@ $ d_setregid = "undef" $ d_setreuid = "undef" $ d_setsid = "undef" $ ! Disable this section for now. -$!$ if (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$!$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ if .NOT. 1 $ then $ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with V7.3-2 UID setting routines" @@ -5152,7 +5253,7 @@ $! $ d_fstatvfs = "undef" $! d_statvfs = "undef" $ i_sysstatvfs = "undef" -$ if (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ then $ echo "Found 64 bit OpenVMS ''vms_ver' -- will build with 8.2 routines" $ d_fstatvfs = "define" @@ -5233,51 +5334,52 @@ $ THEN $ d_attribut="define" $ vms_cc_type="gcc" $ ELSE -$ vms_cc_type="cc" +$ IF ccname .EQS. "CXX" +$ THEN +$ vms_cc_type="cxx" +$ ELSE +$ vms_cc_type="cc" +$ ENDIF $ d_attribut="undef" $ ENDIF $! -$! Dec C >= 5.2 and VMS ver >= 7.0 -$ IF (ccname .EQS. "DEC") .AND. - - (F$INTEGER(Dec_C_Version).GE.50200000) .AND. (vms_ver .GES. "7.0") -$ THEN -$ d_bcmp="define" -$ d_getitimer="define" -$ d_gettimeod="define" -$ d_mmap="define" -$ d_mprotect="define" -$ d_munmap="define" -$ d_msync="define" -$ d_ualarm="define" -$ d_uname="define" -$! d_unsetenv="define" ! Fix me - Activating requires changing VMS code -$ d_unsetenv="undef" ! Change will be needed to allow GNV integration -$ d_clearenv="undef" -$ d_usleep="define" -$ d_setitimer="define" -$ d_sigaction="define" -$ d_sigprocmask="define" -$ d_truncate="define" -$ d_wait4="define" -$ d_index="define" -$ pidtype="pid_t" -$ sig_name1="ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE" -$ sig_name2=" ALRM TERM USR1 USR2 NUM18 NUM19 CHLD CONT STOP TSTP TTIN TTOU DEBUG" -$ IF (vms_ver .GES. "7.3") -$ THEN +$ d_bcmp="define" +$ d_getitimer="define" +$ d_gettimeod="define" +$ d_mmap="define" +$ d_mprotect="define" +$ d_munmap="define" +$ d_msync="define" +$ d_ualarm="define" +$ d_uname="define" +$! d_unsetenv="define" ! Fix me - Activating requires changing VMS code +$ d_unsetenv="undef" ! Change will be needed to allow GNV integration +$ d_clearenv="undef" +$ d_usleep="define" +$ d_setitimer="define" +$ d_sigaction="define" +$ d_sigprocmask="define" +$ d_truncate="define" +$ d_wait4="define" +$ d_index="define" +$ pidtype="pid_t" +$ sig_name1="ZERO HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE" +$ sig_name2=" ALRM TERM USR1 USR2 NUM18 NUM19 CHLD CONT STOP TSTP TTIN TTOU DEBUG" +$ IF (vms_ver .GES. "7.3") +$ THEN $ sig_name2 = sig_name2 + " NUM27 WINCH" -$ ENDIF +$ ENDIF $!* signal.h defines SIGRTMIN as 33 and SIGRTMAX as 64, but there is no $!* sigqueue function or other apparent means to do realtime signalling, $!* so let's not try to include the realtime range for now. $!* sig_name3=" NUM29 NUM30 NUM31 NUM32 RTMIN NUM34 NUM35 NUM36 NUM37 NUM38 NUM39 NUM40 NUM41 NUM42 NUM43" $!* sig_name4=" NUM44 NUM45 NUM46 NUM47 NUM48 NUM49 NUM50 NUM51 NUM52 NUM53 NUM54 NUM55 NUM56 NUM57 NUM58" $!* sig_name5=" NUM59 NUM60 NUM61 NUMT62 NUM63 RTMAX" -$ sig_name = sig_name1 + sig_name2 -$ sig_num = "" -$ sig_num_init = "" -$ sig_name_init = "" -$ sig_index = 0 +$ sig_name = sig_name1 + sig_name2 +$ sig_num = "" +$ sig_num_init = "" +$ sig_name_init = "" +$ sig_index = 0 $! $ PARSE_SIG_NAME_LOOP: $! @@ -5301,41 +5403,7 @@ $ d_pathconf="define" $ d_fpathconf="define" $ d_sysconf="define" $ d_sigsetjmp="define" -$ ELSE -$ pidtype="unsigned int" -$ d_bcmp="undef" -$ d_getitimer="undef" -$ d_gettimeod="undef" -$ d_mmap="undef" -$ d_mprotect="undef" -$ d_munmap="undef" -$ d_msync="undef" -$ d_ualarm="undef" -$ d_uname="undef" -$ d_unsetenv="undef" -$ d_clearenv="undef" -$ d_usleep="undef" -$ d_setitimer="undef" -$ d_sigaction="undef" -$ d_sigprocmask="undef" -$ d_truncate="undef" -$ d_wait4="undef" -$ d_index="undef" -$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT USR1 USR2" -$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS""," -$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",""USR1"",""USR2"",0" -$ sig_name_init = psnwc1 + psnwc2 -$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 16 17" -$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,16,17,0" -$ sig_size="19" -$ sig_count="15" -$ if (vms_ver .GES. "6.2") then sig_count="17" -$ uidtype="unsigned int" -$ d_pathconf="undef" -$ d_fpathconf="undef" -$ d_sysconf="undef" -$ d_sigsetjmp="undef" -$ ENDIF +$! $!: see if tzname[] exists $ OS $ WS "#include " @@ -5361,7 +5429,7 @@ $ d_phostname="undef" $ ENDIF $! $! Dec C alone -$ IF ccname .EQS. "DEC" +$ IF ccname .EQS. "DEC" .OR. ccname .EQS. "CXX" $ THEN $ d_mbstowcs="define" $ d_mbtowc="define" @@ -5379,12 +5447,7 @@ $ d_wctomb="define" $ i_locale="define" $ i_langinfo="define" $ d_locconv="define" -$ IF vms_ver .GES. "6.2" -$ THEN -$ d_nl_langinfo="define" -$ ELSE -$ d_nl_langinfo="undef" -$ ENDIF +$ d_nl_langinfo="define" $ d_setlocale="define" $ vms_cc_type="decc" $ ELSE @@ -5412,13 +5475,13 @@ $ d_stdio_ptr_lval_nochange_cnt="define" $ usefaststdio="undef" $! $! Sockets? -$ if Has_Socketshr .OR. Has_Dec_C_Sockets +$ if Has_Dec_C_Sockets $ THEN $ d_vms_do_sockets="define" $ d_htonl="define" $ d_socket="define" $ d_sockpair = "undef" -$ if (vms_ver .GES. "8.2") .AND. (archname .NES. "VMS_VAX") +$ if (vms_ver .GES. "8.2") .AND. (F$ELEMENT(0, "-", archname) .NES. "VMS_VAX") $ then $ echo "Found 64 bit OpenVMS 8.2, will build with socketpair support" $ d_sockpair = "define" @@ -5471,18 +5534,12 @@ $ d_getservprotos="undef" $ socksizetype="undef" $ ENDIF $! Threads +$ d_oldpthreads="undef" $ IF use_threads $ THEN $ usethreads="define" $ d_pthreads_created_joinable="define" -$ if (vms_ver .GES. "7.0") -$ THEN -$ d_oldpthreads="undef" -$ ELSE -$ d_oldpthreads="define" -$ ENDIF $ ELSE -$ d_oldpthreads="undef" $ usethreads="undef" $ d_pthreads_created_joinable="undef" $ ENDIF @@ -5606,7 +5663,7 @@ $ THEN $ d_nv_preserves_uv = "define" $ echo "Your NVs can preserve all ''nv_preserves_uv_bits' bits of your UVs." $ ELSE -$ d_nv_preserves_uv = "undef"" +$ d_nv_preserves_uv = "undef" $ echo "Your NVs can preserve only ''nv_preserves_uv_bits' bits of your UVs." $ ENDIF $! @@ -5733,12 +5790,20 @@ $ OS $ WS "#include " $ WS "#include " $ WS "unsigned long code = 0;" +$ WS "#define sys$sigprc SYS$SIGPRC" +$ WS "#ifdef __cplusplus" +$ WS "extern ""C"" {" +$ WS "#endif" +$ WS " int sys$sigprc(unsigned int *,void *,unsigned int);" +$ WS "#ifdef __cplusplus" +$ WS "}" +$ WS "#endif" $ WS "int handler(unsigned long *args) {" $ WS " code = args[1];" $ WS " return 1;" $ WS "}" $ WS "main() { " -$ WS " int iss, sys$sigprc();" +$ WS " int iss;" $ WS " lib$establish(handler);" $ WS " iss = sys$sigprc(0,0,0x1234);" $ WS " iss = ((iss&1)==1 && code == 0x1234);" @@ -5752,21 +5817,6 @@ $ THEN $ echo4 "Yep, we can." $ kill_by_sigprc = "define" $! -$! Use the same list of signals the CRTL does for recent systems, but cook our own for very old systems. -$! Note that the list controls what signals can be caught by name as well as what can be raised via kill(). -$! -$ if vms_ver .LTS. "6.2" -$ then -$! since SIGBUS and SIGSEGV indistinguishable, make them the same here. -$ sig_name="ZERO HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM ABRT" -$ psnwc1="""ZERO"",""HUP"",""INT"",""QUIT"",""ILL"",""TRAP"",""IOT"",""EMT"",""FPE"",""KILL"",""BUS"",""SEGV"",""SYS""," -$ psnwc2="""PIPE"",""ALRM"",""TERM"",""ABRT"",0" -$ sig_name_init = psnwc1 + psnwc2 -$ sig_num="0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6" -$ sig_num_init="0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,6,0" -$ sig_size="17" -$ sig_count="15" -$ endif $ ELSE $ echo4 "Nope, we can't." $ ENDIF @@ -5783,10 +5833,8 @@ $ IF ccname .EQS. "DEC" $ THEN $ ccflags="/Include=[]/Standard=Relaxed_ANSI/Prefix=All/Obj=''obj_ext' ''ccflags'" $ ENDIF -$ i_dirent = "undef" $ IF ccname .EQS. "CXX" $ THEN -$ i_dirent = "define" $ ccflags="/Include=[]/Standard=ANSI/Prefix=All/Obj=''obj_ext' ''ccflags'" $ ENDIF $ IF use_vmsdebug_perl @@ -5834,6 +5882,10 @@ $ WC "_exe='" + exe_ext + "'" $ WC "_o='" + obj_ext + "'" $ WC "alignbytes='" + alignbytes + "'" $ WC "aphostname='write sys$output f$edit(f$getsyi(\""SCSNODE\""),\""TRIM,LOWERCASE\"")'" +$ WC "api_revision='" + api_revision + "'" +$ WC "api_subversion='" + api_subversion + "'" +$ WC "api_version='" + api_version + "'" +$ WC "api_versionstring='" + version + "'" $ WC "ar='" + "'" $ WC "archlib='" + archlib + "'" $ WC "archlibexp='" + archlibexp + "'" @@ -5841,6 +5893,7 @@ $ WC "archname='" + archname + "'" $ WC "baserev='" + baserev + "'" $ WC "bin='" + bin + "'" $ WC "binexp='" + binexp + "'" +$ WC "bootstrap_charset='undef'" $ WC "builddir='" + builddir + "'" $ WC "byteorder='1234'" $ WC "castflags='0'" @@ -5885,14 +5938,15 @@ $ WC "d_Gconvert='sprintf((b),""%.*" + (nvgformat-"""") + ",(n),(x))'" $ ELSE $ WC "d_Gconvert='my_gconvert(x,n,t,b)'" $ ENDIF -$ WC "d_PRIEldbl='" + d_PRIEUldbl + "'" -$ WC "d_PRIFldbl='" + d_PRIFUldbl + "'" -$ WC "d_PRIGldbl='" + d_PRIGUldbl + "'" +$ WC "d_PRIEUldbl='" + d_PRIEUldbl + "'" +$ WC "d_PRIFUldbl='" + d_PRIFUldbl + "'" +$ WC "d_PRIGUldbl='" + d_PRIGUldbl + "'" $ WC "d_PRIXU64='" + d_PRIXU64 + "'" $ WC "d_PRId64='" + d_PRId64 + "'" $ WC "d_PRIeldbl='" + d_PRIeldbl + "'" $ WC "d_PRIfldbl='" + d_PRIfldbl + "'" $ WC "d_PRIgldbl='" + d_PRIgldbl + "'" +$ WC "d_PRIi64='" + d_PRIi64 + "'" $ WC "d_PRIo64='" + d_PRIo64 + "'" $ WC "d_PRIu64='" + d_PRIu64 + "'" $ WC "d_PRIx64='" + d_PRIx64 + "'" @@ -6044,7 +6098,12 @@ $ WC "d_inetaton='undef'" $ WC "d_inetntop='undef'" $ WC "d_inetpton='undef'" $ WC "d_int64_t='" + d_int64_t + "'" +$ WC "d_ip_mreq='define'" +$ WC "d_ip_mreq_source='undef'" +$ WC "d_ipv6_mreq='define'" +$ WC "d_ipv6_mreq_source='undef'" $ WC "d_isascii='define'" +$ WC "d_isblank='undef'" $ WC "d_isfinite='undef'" $ WC "d_isinf='undef'" $ WC "d_isnan='" + d_isnan + "'" @@ -6148,9 +6207,20 @@ $ WC "d_sched_yield='" + d_sched_yield + "'" $ WC "d_scm_rights='undef'" $ WC "d_seekdir='define'" $ WC "d_select='" + d_select + "'" -$ WC "d_sem='undef'" -$ WC "d_semctl_semid_ds='undef'" -$ WC "d_semctl_semun='undef'" +$ IF ("''F$EXTRACT(1,3, F$GETSYI(""VERSION""))'".GES."8.4") +$ THEN +$ WC "d_sem='define'" +$ WC "d_semctl_semid_ds='define'" +$ WC "d_semctl_semun='define'" +$ WC "d_semget='define'" +$ WC "d_semop='define'" +$ ELSE +$ WC "d_sem='undef'" +$ WC "d_semctl_semid_ds='undef'" +$ WC "d_semctl_semun='undef'" +$ WC "d_semget='undef'" +$ WC "d_semop='undef'" +$ ENDIF $ WC "d_sendmsg='undef'" $ WC "d_setegid='undef'" $ WC "d_setenv='" + d_setenv + "'" @@ -6185,7 +6255,10 @@ $ WC "d_sigaction='" + d_sigaction + "'" $ WC "d_signbit='" + d_signbit + "'" $ WC "d_sigprocmask='" + d_sigprocmask + "'" $ WC "d_sigsetjmp='" + d_sigsetjmp + "'" +$ WC "d_sin6_scope_id='" + d_sin6_scope_id + "'" $ WC "d_sitearch='define'" +$ WC "d_sockaddr_in6='define'" +$ WC "d_sockaddr_sa_len='" + d_sockaddr_sa_len + "'" $ WC "d_sockatmark='undef'" $ WC "d_sockatmarkproto='undef'" $ WC "d_socket='" + d_socket + "'" @@ -6202,6 +6275,7 @@ $ WC "d_statblks='undef'" $ WC "d_statfs_f_flags='undef'" $ WC "d_statfs_s='undef'" $ WC "d_statfsflags='undef'" +$ WC "d_static_inline='define'" $ WC "d_stdio_cnt_lval='" + d_stdio_cnt_lval + "'" $ WC "d_stdio_ptr_lval='" + d_stdio_ptr_lval + "'" $ WC "d_stdio_ptr_lval_nochange_cnt='" + d_stdio_ptr_lval_nochange_cnt + "'" @@ -6268,6 +6342,7 @@ $ WC "d_vendorlib='undef'" $ WC "d_vfork='define'" $ WC "d_vms_case_sensitive_symbols='" + d_vms_be_case_sensitive + "'" ! VMS $ WC "d_vms_do_sockets='" + d_vms_do_sockets + "'" ! VMS +$ WC "d_vms_shorten_long_symbols='" + d_vms_shorten_long_symbols + "'" ! VMS $ WC "d_void_closedir='define'" $ WC "d_volatile='define'" $ WC "d_vprintf='define'" @@ -6288,7 +6363,7 @@ $ WC "devtype='" + devtype + "'" $ WC "direntrytype='struct dirent'" $ WC "dlext='" + dlext + "'" $ WC "dlobj='" + dlobj + "'" -$ WC "dlsrc='dl_vms.c'" +$ WC "dlsrc='dl_vms.xs'" $ WC "doublesize='" + doublesize + "'" $ WC "drand01='" + drand01 + "'" $ WC "dtrace='" + "'" @@ -6335,7 +6410,7 @@ $ WC "i_assert='define'" $ WC "i_crypt='undef'" $ WC "i_db='undef'" $ WC "i_dbm='undef'" -$ WC "i_dirent='" + i_dirent + "'" +$ WC "i_dirent='undef'" ! we roll our own $ WC "i_dlfcn='undef'" $ WC "i_fcntl='" + i_fcntl + "'" $ WC "i_float='define'" @@ -6372,6 +6447,12 @@ $ WC "i_sgtty='undef'" $ WC "i_shadow='" + i_shadow + "'" $ WC "i_socks='" + i_socks + "'" $ WC "i_stdarg='define'" +$ IF ccname .EQS. "DEC" .AND. F$INTEGER(Dec_C_Version).GE.60400000 +$ THEN +$ WC "i_stdbool='define'" +$ ELSE +$ WC "i_stdbool='undef'" +$ ENDIF $ WC "i_stddef='define'" $ WC "i_stdlib='define'" $ WC "i_string='define'" @@ -6477,8 +6558,11 @@ $ WC "netdb_name_type='" + netdb_name_type + "'" $ WC "netdb_net_type='" + netdb_net_type + "'" $ WC/symbol "nonxs_ext='", nonxs_ext, " ", nonxs_ext2, "'" $ WC "nveformat='" + nveformat + "'" +$ WC "nvEUformat='" + nvEUformat + "'" $ WC "nvfformat='" + nvfformat + "'" +$ WC "nvFUformat='" + nvFUformat + "'" $ WC "nvgformat='" + nvgformat + "'" +$ WC "nvGUformat='" + nvGUformat + "'" $ WC "nvsize='" + nvsize + "'" $ WC "nvtype='" + nvtype + "'" $ WC "o_nonblock=' '" @@ -6498,6 +6582,7 @@ $ WC "perl_root='" + perl_root + "'" ! VMS specific $trnlnm() $ WC "perladmin='" + perladmin + "'" $ WC "perllibs='" + perllibs + "'" $ WC "perlpath='" + "''vms_prefix':[000000]Perl''exe_ext'" + "'" +$ WC "perl_static_inline='static inline'" $ WC "perl_symbol='" + perl_symbol + "'" ! VMS specific $ WC "perl_verb='" + perl_verb + "'" ! VMS specific $ WC "pgflquota='" + pgflquota + "'" @@ -6522,14 +6607,14 @@ $ WC "sGMTIME_min='0'" $ WC "sLOCALTIME_max='4294967295'" $ WC "sLOCALTIME_min='0'" $ WC "sPRId64='" + sPRId64 + "'" -$ WC "sPRIEldbl='" + sPRIEUldbl + "'" -$ WC "sPRIFldbl='" + sPRIFUldbl + "'" -$ WC "sPRIGldbl='" + sPRIGUldbl + "'" -$ WC "sPRIX64='" + sPRIXU64 + "'" +$ WC "sPRIEUldbl='" + sPRIEUldbl + "'" +$ WC "sPRIFUldbl='" + sPRIFUldbl + "'" +$ WC "sPRIGUldbl='" + sPRIGUldbl + "'" +$ WC "sPRIXU64='" + sPRIXU64 + "'" $ WC "sPRIeldbl='" + sPRIeldbl + "'" $ WC "sPRIfldbl='" + sPRIfldbl + "'" $ WC "sPRIgldbl='" + sPRIgldbl + "'" -$! WC "sPRIi64='" + sPRIi64 + "'" +$ WC "sPRIi64='" + sPRIi64 + "'" $ WC "sPRIo64='" + sPRIo64 + "'" $ WC "sPRIu64='" + sPRIu64 + "'" $ WC "sPRIx64='" + sPRIx64 + "'" @@ -6583,6 +6668,8 @@ $ WC "src='" + src + "'" $ WC "ssizetype='int'" $ WC "startperl=" + startperl ! This one's special--no enclosing single quotes $ WC "static_ext='" + static_ext + "'" +$ WC "st_ino_size='" + st_ino_size + "'" +$ WC "st_ino_sign='1'" $ WC "stdchar='" + stdchar + "'" $ WC "stdio_base='((*fp)->_base)'" $ WC "stdio_bufsiz='((*fp)->_cnt + (*fp)->_ptr - (*fp)->_base)'" @@ -6619,22 +6706,26 @@ $ WC "usefaststdio='" + usefaststdio + "'" $ WC "useieee='" + useieee + "'" ! VMS-specific $ WC "useithreads='" + useithreads + "'" $ WC "usekernelthreads='" + usekernelthreads + "'" ! VMS-specific +$ WC "usekernprocpathname='undef'" +$ WC "usensgetexecutablepath='undef'" $ WC "uselargefiles='" + uselargefiles + "'" $ WC "uselongdouble='" + uselongdouble + "'" $ WC "usemorebits='" + usemorebits + "'" $ WC "usemultiplicity='" + usemultiplicity + "'" $ WC "usemymalloc='" + usemymalloc + "'" -$ WC "useperlio='" + useperlio + "'" +$ WC "useperlio='define'" $ WC "useposix='false'" $ WC "usereentrant='undef'" $ WC "userelocatableinc='undef'" $ WC "usesecurelog='" + usesecurelog + "'" ! VMS-specific +$ WC "useshortenedsymbols='" + useshortenedsymbols + "'" ! VMS-specific $ WC "useshrplib='true'" $ WC "usesitecustomize='" + usesitecustomize + "'" $ WC "usesocks='undef'" $ WC "usethreads='" + usethreads + "'" $ WC "usethreadupcalls='" + usethreadupcalls + "'" ! VMS-specific $ WC "usevendorprefix='" + "'" ! try to say no, though we'll be ignored as of MM 5.90_01 +$ WC "useversionedarchname='" + useversionedarchname + "'" $ WC "usevfork='true'" $ WC "usevmsdebug='" + usevmsdebug + "'" ! VMS-specific $ WC "uvoformat='" + uvoformat + "'" @@ -6849,8 +6940,6 @@ $ IF (Has_Dec_C_Sockets) $ THEN $ WC "#define VMS_DO_SOCKETS" $ WC "#define DECCRTL_SOCKETS" -$ ELSE -$ IF Has_Socketshr THEN WC "#define VMS_DO_SOCKETS" $ ENDIF $! This is VMS-specific for now $ WC "#''d_setenv' HAS_SETENV" @@ -6859,25 +6948,25 @@ $ IF d_alwdeftype THEN WC "#define ALWAYS_DEFTYPES" $ IF use64bitint .OR. use64bitint .EQS. "define" $ THEN $ WC "#define USE_64_BIT_INT" +$ ENDIF +$ IF uselongdouble .OR. uselongdouble .EQS. "define" +$ THEN $ WC "#define USE_LONG_DOUBLE" $ ENDIF $ IF use64bitall .OR. use64bitall .EQS. "define" THEN - WC "#define USE_64_BIT_ALL" $ IF be_case_sensitive THEN WC "#define VMS_WE_ARE_CASE_SENSITIVE" +$ IF shorten_long_symbols THEN WC "#define VMS_SHORTEN_LONG_SYMBOLS" $ IF use_ieee_math THEN WC "#define USE_IEEE" $ IF d_herrno .EQS. "undef" THEN WC "#define NEED_AN_H_ERRNO" $ WC "#define HAS_ENVGETENV" $ WC "#define PERL_EXTERNAL_GLOB" -$ IF archname .EQS. "VMS_VAX" .AND. - - ccname .EQS. "DEC" .AND. - - ccversion .LE. 50390006 -$ THEN -$! Alas this does not help to build Fcntl -$! WC "#define PERL_IGNORE_FPUSIG SIGFPE" -$ ENDIF $ IF kill_by_sigprc .EQS. "define" then WC "#define KILL_BY_SIGPRC" $ IF unlink_all_versions .OR. unlink_all_versions .EQS. "define" THEN - WC "#define UNLINK_ALL_VERSIONS" +$ IF d_sockaddr_sa_len .EQS. "define" then WC "#define _SOCKADDR_LEN 1" +$ IF ccname .EQS. "CXX" then WC "#define NO_ENVIRON_ARRAY" +$ IF ccname .EQS. "CXX" then WC "#define VMS" ! only has __VMS by default $ CLOSE CONFIG $! $ echo4 "Doing variable substitutions on .SH files..." @@ -6915,21 +7004,11 @@ $ IF Has_Dec_C_Sockets $ THEN $ SOCKET_REPLACE = "SOCKET=DECC_SOCKETS=1" $ ELSE -$ IF Has_Socketshr -$ THEN -$ SOCKET_REPLACE = "SOCKET=SOCKETSHR_SOCKETS=1" -$ ELSE -$ SOCKET_REPLACE = "SOCKET=" -$ ENDIF +$ SOCKET_REPLACE = "SOCKET=" $ ENDIF $ IF use_threads $ THEN -$ IF (vms_ver .LES. "6.2") -$ THEN -$ THREAD_REPLACE = "THREAD=OLDTHREADED=1" -$ ELSE -$ THREAD_REPLACE = "THREAD=THREADED=1" -$ ENDIF +$ THREAD_REPLACE = "THREAD=THREADED=1" $ ELSE $ THREAD_REPLACE = "THREAD=" $ ENDIF @@ -6970,6 +7049,7 @@ $ WC "''THREAD_KERNEL'" $ WC "PV=''version'" $ WC "FLAGS=FLAGS=''extra_flags'" $ WC "''LARGEFILE_REPLACE'" +$ WC "ARCHNAME=ARCHNAME=''archname'" $ close CONFIG $! $ echo4 "Extracting ''defmakefile' (with variable substitutions)" @@ -7095,8 +7175,8 @@ $ echo "" $ echo4 "The perl.cld file is now being written..." $ OPEN/WRITE CONFIG 'file_2_find' $ ext = ".exe" -$ IF (sharedperl .AND. F$EXTRACT(0,7,archname) .EQS. "VMS_AXP") THEN ext := .AXE -$ IF (sharedperl .AND. F$EXTRACT(0,8,archname) .EQS. "VMS_IA64") THEN ext := .IXE +$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_AXP") THEN ext := .AXE +$ IF (sharedperl .AND. F$ELEMENT(0, "-", archname) .EQS. "VMS_IA64") THEN ext := .IXE $ IF (use_vmsdebug_perl) $ THEN $ WRITE CONFIG "define verb dbgperl" @@ -7201,14 +7281,6 @@ $ WRITE CONFIG "$ c2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]c $ WRITE CONFIG "$ config_data== """ + perl_setup_perl + " ''vms_prefix':[utils]config_data.com""" $ WRITE CONFIG "$ corelist == """ + perl_setup_perl + " ''vms_prefix':[utils]corelist.com""" $ WRITE CONFIG "$ cpan == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan.com""" -$ WRITE CONFIG "$ cpan2dist == """ + perl_setup_perl + " ''vms_prefix':[utils]cpan2dist.com""" -$! FIXME: "-" is an operator and illegal in a symbol name -- cpanp-run-perl can't work -$!$ WRITE CONFIG "$ cpanp-run-perl == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp-run-perl.com""" -$ WRITE CONFIG "$ cpanp == """ + perl_setup_perl + " ''vms_prefix':[utils]cpanp.com""" -$ IF F$LOCATE("Devel::DProf",dynamic_ext) .LT. F$LENGTH(dynamic_ext) -$ THEN -$ WRITE CONFIG "$ dprofpp == """ + perl_setup_perl + " ''vms_prefix':[utils]dprofpp.com""" -$ ENDIF $ WRITE CONFIG "$ enc2xs == """ + perl_setup_perl + " ''vms_prefix':[utils]enc2xs.com""" $ WRITE CONFIG "$ find2perl == """ + perl_setup_perl + " ''vms_prefix':[utils]find2perl.com""" $ WRITE CONFIG "$ h2ph == """ + perl_setup_perl + " ''vms_prefix':[utils]h2ph.com""" @@ -7221,7 +7293,6 @@ $ WRITE CONFIG "$ perlivp == """ + perl_setup_perl + " ''vms_prefix':[utils]p $ WRITE CONFIG "$ piconv == """ + perl_setup_perl + " ''vms_prefix':[utils]piconv.com""" $ WRITE CONFIG "$ pl2pm == """ + perl_setup_perl + " ''vms_prefix':[utils]pl2pm.com""" $ WRITE CONFIG "$ pod2html == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2html.com""" -$ WRITE CONFIG "$ pod2latex == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2latex.com""" $ WRITE CONFIG "$ pod2text == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2text.com""" $ WRITE CONFIG "$!pod2man == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2man.com""" $ WRITE CONFIG "$ pod2usage == """ + perl_setup_perl + " ''vms_prefix':[utils]pod2usage.com""" @@ -7233,9 +7304,11 @@ $ WRITE CONFIG "$ pstruct == """ + perl_setup_perl + " ''vms_prefix':[utils]p $ WRITE CONFIG "$ s2p == """ + perl_setup_perl + " ''vms_prefix':[utils]s2p.com""" $ WRITE CONFIG "$ ptar == """ + perl_setup_perl + " ''vms_prefix':[utils]ptar.com""" $ WRITE CONFIG "$ ptardiff == """ + perl_setup_perl + " ''vms_prefix':[utils]ptardiff.com""" +$ WRITE CONFIG "$ ptargrep == """ + perl_setup_perl + " ''vms_prefix':[utils]ptargrep.com""" $ WRITE CONFIG "$ shasum == """ + perl_setup_perl + " ''vms_prefix':[utils]shasum.com""" $ WRITE CONFIG "$ splain == """ + perl_setup_perl + " ''vms_prefix':[utils]splain.com""" $ WRITE CONFIG "$ xsubpp == """ + perl_setup_perl + " ''vms_prefix':[utils]xsubpp.com""" +$ WRITE CONFIG "$ zipdetails == """ + perl_setup_perl + " ''vms_prefix':[utils]zipdetails.com""" $ CLOSE CONFIG $! $ echo "" @@ -7315,6 +7388,11 @@ $ ENDIF $ dflt = F$ENVIRONMENT("DEFAULT") $ IF F$LOCATE("UU]",dflt).EQS.(F$LENGTH(dflt)-3) $ THEN +$ IF ( F$SEARCH("[.CXX_REPOSITORY]*.*").NES."" ) +$ THEN +$ DELETE/NOLOG/NOCONFIRM [.CXX_REPOSITORY]*.*;* +$ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) CXX_REPOSITORY.DIR +$ ENDIF $ IF ( F$SEARCH("[]*.*").NES."" ) THEN DELETE/NOLOG/NOCONFIRM []*.*;* $ SET DEFAULT [-] $ SET PROTECTION=(SYSTEM:RWED,OWNER:RWED) UU.DIR