X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/7589e17d81493a7065648e700081a252e10a5c33..ca0c25f67f45e5dccb746852d8545d7ae29ed067:/Makefile.SH diff --git a/Makefile.SH b/Makefile.SH index 01fab27..06fdd3b 100644 --- a/Makefile.SH +++ b/Makefile.SH @@ -9,6 +9,21 @@ case $PERL_CONFIG_SH in . $TOP/config.sh ;; esac + +# H.Merijn Brand [17 Feb 2004] +# This comment is just to ensure that Configure will find variables that +# are removed/replaced in patches on blead, but are still needed in the +# 5.8.x, 5.6.x and 5.005.x maintainance tracks. +# metaconfig -m will scan all .SH files on this level (not deeper), and +# not in x2p and other subfolders. This file is as good as any .SH +# patch references +# #22227 $baserev +# #22302 $yacc $byacc + +# H.Merijn Brand [30 Oct 2004] +# Mentioned for the same reason for future reference +# #23434 $d_strlcat $d_strlcpy + : This forces SH files to create target in same directory as SH file. : This is so that make depend always knows where to find SH derivatives. case "$0" in @@ -61,6 +76,10 @@ true) netbsd*|freebsd[234]*|openbsd*) linklibperl="-L. -lperl" ;; + interix*) + linklibperl="-L. -lperl" + shrpldflags="$shrpldflags -Wl,--image-base,0x57000000" + ;; aix*) shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp" case "$osvers" in @@ -96,22 +115,44 @@ true) ldlibpth=`echo $ldlibpth | sed 's/:*$//'` ;; esac + + case "$ldlibpth" in + # Protect any spaces + *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; + esac + + case "$osname" in + linux) + # If there is a pre-existing $libperl from a previous + # installation, Linux needs to use LD_PRELOAD to + # override the LD_LIBRARY_PATH setting. See the + # INSTALL file, under "Building a shared perl library". + # If there is no pre-existing $libperl, we don't need + # to do anything further. + if test -f $archlib/CORE/$libperl; then + rm -f preload + cat <<'EOT' > preload +#! /bin/sh +lib=$1 +shift +test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD" +exec "$@" +EOT + chmod 755 preload + ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl" + fi + ;; + os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" + ;; + esac + ;; + *) pldlflags='' static_target='static' ;; esac -case "$ldlibpth" in -# Protect any spaces -*" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;; -esac - -case "$osname" in -os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth" - ;; -esac - : Prepare dependency lists for Makefile. dynamic_list=' ' for f in $dynamic_ext; do @@ -132,15 +173,6 @@ for f in $nonxs_ext; do nonxs_list="$nonxs_list ext/$f/pm_to_blib" done -# Handle the usage of different yaccs in posix-bc (During Configure we -# us yacc for perly.y and byacc for a2p.y. The makefiles must use the -# same configuration for run_byacc!): -case "$osname" in - posix-bc) - byacc=$yacc - ;; -esac - echo "Extracting Makefile (with variable substitutions)" $spitshell >Makefile <Makefile < testcompile; cd utils; $(MAKE) compile; cd x2p; $(MAKE) compile; cd pod; $(MAKE) compile; -translators: miniperl$(EXE_EXT) lib/Config.pm FORCE +translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all -utilities: miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE +utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all @@ -363,11 +423,12 @@ $spitshell >>Makefile <>Makefile <<'!NO!SUBS!' @@ -375,12 +436,21 @@ miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h $(CCCMD) $(PLDLFLAGS) $*.c perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE) - sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp - sh mv-if-diff writemain.tmp perlmain.c + sh writemain $(DYNALOADER) $(static_ext) > perlmain.c +!NO!SUBS! +case "$osname" in +cygwin) + ;; # Let cygwin/Makefile.SHs do its work. +*) + $spitshell >>Makefile <<'!NO!SUBS!' perlmain$(OBJ_EXT): perlmain.c $(CCCMD) $(PLDLFLAGS) $*.c +!NO!SUBS! + ;; +esac +$spitshell >>Makefile <<'!NO!SUBS!' # The file ext.libs is a list of libraries that must be linked in # for static extensions, e.g. -lm -lgdbm, etc. The individual # static extension Makefile's add to it. @@ -440,8 +510,7 @@ PERLEXPORT = perl.exp esac $spitshell >>Makefile <<'!NO!SUBS!' perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) - ./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp - sh mv-if-diff perl.exp.tmp perl.exp + ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp !NO!SUBS! ;; @@ -450,8 +519,7 @@ os2) MINIPERLEXP = miniperl perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map - ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp - sh mv-if-diff perl.exp.tmp perl5.def + ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp !NO!SUBS! ;; @@ -470,7 +538,7 @@ $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT) case "$useshrplib" in true) $spitshell >>Makefile <<'!NO!SUBS!' - $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) + $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) $(libs) !NO!SUBS! case "$osname" in aix) @@ -505,7 +573,7 @@ $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT) !NO!SUBS! case "${osname}${osvers}" in - aix*) + aix*|beos*) $spitshell >>Makefile <<'!NO!SUBS!' miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) $(CC) -o miniperl $(CLDFLAGS) \ @@ -514,7 +582,7 @@ miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; - beos*|next4*) + next4*) $spitshell >>Makefile <<'!NO!SUBS!' miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \ @@ -522,6 +590,27 @@ miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '' || $(MAKE) minitest !NO!SUBS! ;; + darwin*) + case "$osvers" in + [1-6].*) ;; + *) case "$ldflags" in + *"-flat_namespace"*) ;; + *) # to allow opmini.o to override stuff in libperl.dylib + $spitshell >>Makefile <>Makefile <<'!NO!SUBS!' +miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) + -@rm -f miniperl.xok + $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \ + miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs) + $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '' || $(MAKE) minitest +!NO!SUBS! + ;; *) $spitshell >>Makefile <<'!NO!SUBS!' miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT) @@ -550,12 +639,23 @@ purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_e quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT) $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs) +# Valgrind perl (currently Linux only) + +perl.valgrind.config: config.sh + @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..." + @$(MAKE) perl.config.dashg + @echo "Checking usemymalloc='n' in config.sh..." + @grep "^usemymalloc=" config.sh + @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 + @echo "And of course you have to have valgrind..." + valgrind ./perl -e 1 2>/dev/null || exit 1 + # Third Degree Perl (Tru64 only) perl.config.dashg: @echo "Checking optimize='-g' in config.sh..." @grep "^optimize=" config.sh - @grep "^optimize='-g'" config.sh >/dev/null || exit 1 + @egrep "^optimize='(-g|.*-g[1-3].*)'" config.sh >/dev/null || exit 1 perl.third.config: config.sh @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..." @@ -565,7 +665,7 @@ perl.third.config: config.sh @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1 perl.third: /usr/bin/atom perl.third.config perl - atom -tool third -L. -all -gp -toolargs="-pthread -fork -quiet -invalid -uninit heap+stack+partword+copy -min 0" perl + atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl @echo "Now you may run perl.third and then study perl.3log." # Pixie Perls (Tru64 and IRIX only) @@ -654,7 +754,7 @@ sperl$(OBJ_EXT): perl.c $(h) # We need to autosplit in two steps because VOS can't handle so many args # .PHONY: preplibrary -preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL) +preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL) @sh ./makedir lib/auto @echo " AutoSplitting perl library" $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \ @@ -663,32 +763,34 @@ preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL) autosplit_lib_modules(@ARGV)' lib/*/*.pm $(MAKE) lib/re.pm -# Take care to avoid modifying lib/Config.pm without reason -# (If trying to create a new port and having problems with the configpm script, -# try 'make minitest' and/or commenting out the tests at the end of configpm.) -lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm - $(LDLIBPTH) ./miniperl -Ilib configpm configpm.tmp - sh mv-if-diff configpm.tmp $@ +lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary + $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm + +$(CONFIGPM): lib/Config.pod -lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm - $(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp - sh mv-if-diff minimod.tmp $@ - -touch lib/ExtUtils/Miniperl.pm +lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM) + $(LDLIBPTH) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm lib/re.pm: ext/re/re.pm - cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm + cp ext/re/re.pm lib/re.pm -$(plextract): miniperl$(EXE_EXT) lib/Config.pm x2p/s2p +$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p @-rm -f $@ - $(LDLIBPTH) ./miniperl -Ilib $@.PL + $(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL -x2p/s2p: miniperl$(EXE_EXT) lib/Config.pm x2p/s2p.PL +x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL cd x2p; $(LDLIBPTH) $(MAKE) s2p -lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm +lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM) @-rm -f $@ $(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL +unidatafiles $(unidatafiles): uni.data + +uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables + cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w + touch uni.data + extra.pods: miniperl$(EXE_EXT) -@test -f extra.pods && rm -f `cat extra.pods` -@rm -f extra.pods @@ -699,35 +801,42 @@ extra.pods: miniperl$(EXE_EXT) done -@rm -f pod/perlvms.pod -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods - + -@rm -f pod/perldelta.pod + -@test -f pod/perl593delta.pod && cd pod && $(LNS) perl593delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc extras.make: perl$(EXE_EXT) - -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` + -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst` extras.test: perl$(EXE_EXT) - -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` + -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst` extras.install: perl$(EXE_EXT) - -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` + -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst` .PHONY: install install-strip install-all install-verbose install-silent \ no-install install.perl install.man install.html +META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm + $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta + install-strip: - $(MAKE) STRIPFLAGS=-s install + $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)" install install-all: - $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) + $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)" install-verbose: - $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V + $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)" install-silent: - $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S + $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)" no-install: - $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n + $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)" -install.perl: all installperl +# Set this to an empty string to avoid an attempt of rebuild before install +INSTALL_DEPENDENCE = all + +install.perl: $(INSTALL_DEPENDENCE) installperl if [ -n "$(COMPILE)" ]; \ then \ cd utils; $(MAKE) compile; \ @@ -735,49 +844,40 @@ install.perl: all installperl cd ../pod; $(MAKE) compile; \ else :; \ fi - $(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS) + $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS) $(MAKE) extras.install install.man: all installman - $(LDLIBPTH) ./perl installman $(INSTALLFLAGS) + $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS) # XXX Experimental. Hardwired values, but useful for testing. # Eventually Configure could ask for some of these values. install.html: all installhtml -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd .. - $(LDLIBPTH) ./perl installhtml \ + $(LDLIBPTH) ./perl installhtml \ --podroot=. --podpath=. --recurse \ - --htmldir=$(privlib)/html \ - --htmlroot=$(privlib)/html \ + --htmldir=$(privlib)/html \ + --htmlroot=$(privlib)/html \ --splithead=pod/perlipc \ --splititem=pod/perlfunc \ --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \ + --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \ --verbose # I now supply perly.c with the kits, so the following section is -# used only if you force byacc to run by saying -# make run_byacc -# Since we patch up the byacc output, the perly.fixer script needs -# to run with precisely the same version of byacc as I use. You -# normally shouldn't remake perly.[ch]. - -.PHONY: check_byacc run_byacc - -check_byacc: - @$(BYACC) -V 2>&1 | grep 'version 1\.8\.2' - -run_byacc: FORCE check_byacc - $(BYACC) -d perly.y - -chmod 664 perly.c perly.h - sh $(shellflags) ./perly.fixer y.tab.c perly.c - sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ - -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c - sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h - cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h - perl -i.old perlyline.pl perly.c - chmod 664 vms/perly_c.vms vms/perly_h.vms - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms +# used only if you force bison to run by saying +# make regen_perly +# You normally shouldn't remake perly.[ch]. + +.PHONY: regen_perly + +run_byacc: + @echo "run_byacc is obsolete; try 'make regen_perly' instead" + +# this outputs perly.act and perly.tab +regen_perly: + perl regen_perly.pl # We don't want to regenerate perly.c and perly.h, but they might # appear out-of-date after a patch is applied or a new distribution is @@ -788,11 +888,6 @@ perly.c: perly.y perly.h: perly.y -@sh -c true -PERLYVMS = vms/perly_c.vms vms/perly_h.vms - -$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl - perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms - # No compat3.sym here since and including the 5.004_50. # No interp.sym since 5.005_03. SYM = global.sym globvar.sym perlio.sym pp.sym @@ -802,20 +897,22 @@ SYMH = perlvars.h intrpvar.h thrdvar.h CHMOD_W = chmod +w # The following files are generated automatically -# keywords.pl: keywords.h -# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym -# [* embed.pl needs pp.sym generated by opcode.pl! *] -# embed.pl: proto.h embed.h embedvar.h global.sym -# perlapi.h perlapi.c pod/perlintern.pod -# pod/perlapi.pod +# autodoc.pl: pod/perlapi.pod pod/perlintern.pod # bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c # ext/B/B/Asmdata.pm +# embed.pl: proto.h embed.h embedvar.h global.sym +# perlapi.h perlapi.c +# [* embed.pl needs pp.sym generated by opcode.pl! *] +# keywords.pl: keywords.h +# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym # regcomp.pl: regnodes.h # warnings.pl: warnings.h lib/warnings.pm # The correct versions should be already supplied with the perl kit, # in case you don't have perl available. -# To force them to be regenerated, type -# make regen_headers +# To force them to be regenerated, run +# perl regen.pl +# with your existing copy of perl +# (make regen_headers is kept for backwards compatibility) AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ embed.h embedvar.h global.sym \ @@ -826,20 +923,22 @@ AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \ .PHONY: regen_headers regen_pods regen_all -regen_headers: FORCE - -$(CHMOD_W) $(AUTOGEN_FILES) - -perl keywords.pl - -perl opcode.pl - -perl embed.pl - -perl bytecode.pl - -perl regcomp.pl - -perl warnings.pl - -perl autodoc.pl +regen regen_headers: FORCE + -perl regen.pl regen_pods: FORCE -cd pod; $(LDLIBPTH) $(MAKE) regen_pods -regen_all: $(PERLYVMS) regen_headers regen_pods +regen_all: regen regen_pods + +.PHONY: manisort manicheck + +manisort: FORCE + LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \ + LC_ALL=C sort -fdo MANIFEST MANIFEST) + +manicheck: FORCE + perl Porting/manicheck # Extensions: # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will @@ -886,17 +985,19 @@ veryclean: _verycleaner _mopup _clobber # Do not 'make _mopup' directly. _mopup: - rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c + rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c + -rmdir .depending -@test -f extra.pods && rm -f `cat extra.pods` -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod - -rm -f perl.exp ext.libs extra.pods opmini.o + -rm -f perl.exp ext.libs extra.pods uni.data opmini.o -rm -f perl.export perl.dll perl.libexp perl.map perl.def -rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump - rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl + -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl + -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old # Do not 'make _tidy' directly. _tidy: @@ -920,22 +1021,28 @@ _cleaner1: # Some systems do not support "?", so keep these files separate. _cleaner2: -rm -f core.*perl.*.? t/core.perl.*.? .?*.c - rm -f core *perl.core t/core t/*perl.core + rm -f core *perl.core t/core t/*perl.core core.* t/core.* rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR) rm -rf $(addedbyconf) - rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old + rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old rm -f $(private) + rm -rf $(unidatafiles) $(unidatadirs) rm -rf lib/auto rm -f lib/.exists lib/*/.exists lib/*/*/.exists rm -f h2ph.man pstruct rm -rf .config + rm -f preload rm -f testcompile compilelog - -rmdir lib/B lib/Data lib/Digest rm -rf lib/Encode - -rmdir lib/IO/Socket lib/IO/t lib/IO - -rmdir lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys - -rmdir lib/Thread lib/XS lib/threads/shared lib/threads t/lib/B + rm -f lib/ExtUtils/ParseXS/t/XSTest.c + rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT) + rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX) + -rmdir lib/B lib/Data + -rmdir lib/Compress/Zlib lib/Compress/Gzip lib/Compress + -rmdir lib/Filter/Util lib/IO/Socket lib/IO/Compress lib/IO/Uncompress + -rmdir lib/List lib/MIME lib/Scalar lib/Sys + -rmdir lib/threads lib/XS _realcleaner: @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean @@ -946,14 +1053,10 @@ _verycleaner: @$(LDLIBPTH) $(MAKE) _cleaner2 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig -# The following lint has practically everything turned on. Unfortunately, -# you have to wade through a lot of mumbo jumbo that can't be suppressed. -# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message -# for that spot. - .PHONY: lint lint: $(c) - lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz + rm -f *.ln + lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c) # Need to unset during recursion to go out of loop. # The README below ensures that the dependency list is never empty and @@ -981,9 +1084,10 @@ makedepend: makedepend.SH config.sh .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \ test_tty test-tty _test_tty test_notty test-notty _test_notty \ utest ucheck test.utf8 check.utf8 test.torture torturetest \ + test.utf16 check.utf16 utest.utf16 ucheck.utf16 \ test.third check.third utest.third ucheck.third test_notty.third \ - test.deparse test_notty.deparse \ - minitest coretest + test.deparse test_notty.deparse test_harness test_harness_notty \ + test.bytecompile minitest coretest test.taintwarn # Cannot delegate rebuilding of t/perl to make # to allow interlaced test and minitest @@ -997,14 +1101,14 @@ _test_prep: test_prep_pre: preplibrary utilities $(nonxs_ext) -test_prep: test_prep_pre miniperl$(EXE_EXT) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) +test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL) PERL=./perl $(MAKE) _test_prep _test_tty: - cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) $(TESTFILE) $(TEST_ARGS) tags +ctags: + ctags -f Tags -N --totals --languages=c --langmap=c:+.h *.c *.h + # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE # If this runs make out of memory, delete /usr/include lines. !NO!SUBS! @@ -1170,44 +1316,11 @@ $rm -f $firstmakefile # Now do any special processing required before building. case "$ebcdic" in -$define) +define) xxx='' - echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4 + echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2 case "$osname" in os390|posix-bc) - rm -f y.tab.c y.tab.h - # yacc must be a reentrant ("pure") Bison in BS2000 Posix! - yacc -d perly.y >/dev/null 2>&1 - if cmp -s y.tab.c perly.c; then - rm -f y.tab.c - else - echo "perly.y -> perly.c" >&2 - mv -f y.tab.c perly.c - chmod u+w perly.c - sed -e '/^#include "perl\.h"/a\ -\ -#define yydebug PL_yydebug\ -#define yynerrs PL_yynerrs\ -#define yyerrflag PL_yyerrflag\ -#define yychar PL_yychar\ -#define yyval PL_yyval\ -#define yylval PL_yylval' \ - -e '/YYSTYPE *yyval;/D' \ - -e '/YYSTYPE *yylval;/D' \ - -e '/int yychar,/,/yynerrs;/D' \ - -e 's/int yydebug = 0;/yydebug = 0;/' \ - -e 's/[^_]realloc(/PerlMem_realloc(/g' \ - -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \ - -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c - xxx="$xxx perly.c" - fi - if cmp -s y.tab.h perly.h; then - rm -f y.tab.h - else - echo "perly.y -> perly.h" >&2 - mv -f y.tab.h perly.h - xxx="$xxx perly.h" - fi if cd x2p then rm -f y.tab.c y.tab.h @@ -1260,3 +1373,4 @@ esac ;; esac +# ex: set ts=8 sts=4 sw=4 noet: