X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/5980092c5925d8139dc767afb97df52a17c62fbc..5328d5f1254873f2c5a67cc00d02cb33cb1d4d13:/pod/perldelta.pod diff --git a/pod/perldelta.pod b/pod/perldelta.pod index f6dc077..d4a8e67 100644 --- a/pod/perldelta.pod +++ b/pod/perldelta.pod @@ -2,444 +2,132 @@ =head1 NAME -[ this is a template for a new perldelta file. Any text flagged as XXX needs -to be processed before release. ] - -perldelta - what is new for perl v5.39.3 +perldelta - what is new for perl v5.39.7 =head1 DESCRIPTION -This document describes differences between the 5.39.2 release and the 5.39.3 +This document describes differences between the 5.39.6 release and the 5.39.7 release. -If you are upgrading from an earlier release such as 5.39.1, first read -L, which describes differences between 5.39.1 and 5.39.2. - -=head1 Notice - -XXX Any important notices here - -=head1 Core Enhancements - -XXX New core language features go here. Summarize user-visible core language -enhancements. Particularly prominent performance optimisations could go -here, but most should go in the L section. - -[ List each enhancement as a =head2 entry ] - -=head1 Security - -XXX Any security-related notices go here. In particular, any security -vulnerabilities closed should be noted here rather than in the -L section. - -[ List each security issue as a =head2 entry ] - -=head1 Incompatible Changes - -XXX For a release on a stable branch, this section aspires to be: - - There are no changes intentionally incompatible with 5.XXX.XXX - If any exist, they are bugs, and we request that you submit a - report. See L below. - -[ List each incompatible change as a =head2 entry ] - -=head1 Deprecations - -XXX Any deprecated features, syntax, modules etc. should be listed here. - -=head2 Module removals - -XXX Remove this section if not applicable. - -The following modules will be removed from the core distribution in a -future release, and will at that time need to be installed from CPAN. -Distributions on CPAN which require these modules will need to list them as -prerequisites. - -The core versions of these modules will now issue C<"deprecated">-category -warnings to alert you to this fact. To silence these deprecation warnings, -install the modules in question from CPAN. - -Note that these are (with rare exceptions) fine modules that you are encouraged -to continue to use. Their disinclusion from core primarily hinges on their -necessity to bootstrapping a fully functional, CPAN-capable Perl installation, -not usually on concerns over their design. - -=over - -=item XXX - -XXX Note that deprecated modules should be listed here even if they are listed -as an updated module in the L section. - -=back - -[ List each other deprecation as a =head2 entry ] - -=head1 Performance Enhancements - -XXX Changes which enhance performance without changing behaviour go here. -There may well be none in a stable release. - -[ List each enhancement as an =item entry ] - -=over 4 - -=item * - -XXX - -=back +If you are upgrading from an earlier release such as 5.39.5, first read +L, which describes differences between 5.39.5 and 5.39.6. =head1 Modules and Pragmata -XXX All changes to installed files in F, F, F and F -go here. If Module::CoreList is updated, generate an initial draft of the -following sections using F. A paragraph summary -for important changes should then be added by hand. In an ideal world, -dual-life modules would have a F file that could be cribbed. - The list of new and updated modules is modified automatically as part of preparing a Perl release, so the only reason to manually add entries here is if you're summarising the important changes in the module update. (Also, if the manually-added details don't match the automatically-generated ones, the release manager will have to investigate the situation carefully.) -[ Within each section, list entries as an =item entry ] - -=head2 New Modules and Pragmata - -=over 4 - -=item * - -XXX Remove this section if Porting/corelist-perldelta.pl did not add any content here. - -=back - =head2 Updated Modules and Pragmata =over 4 =item * -L has been upgraded from version A.xx to B.yy. - -XXX If there was something important to note about this change, include that here. - -=back - -=head2 Removed Modules and Pragmata - -=over 4 +L has been upgraded from version 5.77 to 5.78. =item * -XXX Remove this section if Porting/corelist-perldelta.pl did not add any content here. - -=back - -=head1 Documentation - -XXX Changes to files in F go here. Consider grouping entries by -file and be sure to link to the appropriate page, e.g. L. - -=head2 New Documentation - -XXX Changes which create B files in F go here. - -=head3 L - -XXX Description of the purpose of the new file here - -=head2 Changes to Existing Documentation - -We have attempted to update the documentation to reflect the changes -listed in this document. If you find any we have missed, open an issue -at L. - -XXX Changes which significantly change existing files in F go here. -However, any changes to F should go in the L -section. - -Additionally, the following selected changes have been made: - -=head3 L - -=over 4 - -=item * - -XXX Description of the change here - -=back - -=head1 Diagnostics - -The following additions or changes have been made to diagnostic output, -including warnings and fatal error messages. For the complete list of -diagnostic messages, see L. - -XXX New or changed warnings emitted by the core's C code go here. Also -include any changes in L that reconcile it to the C code. - -=head2 New Diagnostics - -XXX Newly added diagnostic messages go under here, separated into New Errors -and New Warnings - -=head3 New Errors - -=over 4 - -=item * - -XXX L - -=back - -=head3 New Warnings - -=over 4 +L has been upgraded from version 0.30 to 0.31. =item * -XXX L - -=back - -=head2 Changes to Existing Diagnostics - -XXX Changes (i.e. rewording) of diagnostic messages go here +L has been upgraded from version 0.22 to 0.23. -=over 4 +It now handles the additional locale categories that Linux defines +beyond those in the POSIX Standard. =item * -XXX Describe change here - -=back - -=head1 Utility Changes - -XXX Changes to installed programs such as F and F go here. -Most of these are built within the directory F. - -[ List utility changes as a =head2 entry for each utility and =item -entries for each change -Use L with program names to get proper documentation linking. ] - -=head2 L - -=over 4 +L has been upgraded from version 2.003001 to 2.003002. =item * -XXX - -=back - -=head1 Configuration and Compilation - -XXX Changes to F, F, F, and analogous tools -go here. Any other changes to the Perl build process should be listed here. -However, any platform-specific changes should be listed in the -L section, instead. - -[ List changes as an =item entry ]. - -=over 4 +L has been upgraded from version 0.5016 to 0.5018. =item * -Fix here-doc used for code to probe C syntax for disparate -locales introduced in 5.39.2. [GH #21451] - -=back - -=head1 Testing - -XXX Any significant changes to the testing of a freshly built perl should be -listed here. Changes which create B files in F go here as do any -large changes to the testing harness (e.g. when parallel testing was added). -Changes to existing files in F aren't worth summarizing, although the bugs -that they represent may be covered elsewhere. - -XXX If there were no significant test changes, say this: - -Tests were added and changed to reflect the other additions and changes -in this release. - -XXX If instead there were significant changes, say this: - -Tests were added and changed to reflect the other additions and -changes in this release. Furthermore, these significant changes were -made: - -[ List each test improvement as an =item entry ] - -=over 4 +L has been upgraded from version 1.75 to 1.76. =item * -F would fail when C was the BusyBox implementation, -since that doesn't support the C<-p> flag and otherwise ignores a -process id on the command-line. This caused F failures on -BusyBox systems such as Alpine Linux. [GH #17542] +L has been upgraded from version 1.26 to 1.27. =back -=head1 Platform Support - -XXX Any changes to platform support should be listed in the sections below. - -[ Within the sections, list each platform as an =item entry with specific -changes as paragraphs below it. ] - -=head2 New Platforms - -XXX List any platforms that this version of perl compiles on, that previous -versions did not. These will either be enabled by new files in the F -directories, or new subdirectories and F files at the top level of the -source tree. - -=over 4 - -=item XXX-some-platform - -XXX - -=back - -=head2 Discontinued Platforms - -XXX List any platforms that this version of perl no longer compiles on. - -=over 4 - -=item XXX-some-platform - -XXX - -=back - -=head2 Platform-Specific Notes - -XXX List any changes for specific platforms. This could include configuration -and compilation changes or changes in portability/compatibility. However, -changes within modules for platforms should generally be listed in the -L section. - -=over 4 - -=item MacOS/Darwin +=head1 Documentation -Don't set C when building on OS X 10.5. [GH -#21367] +=head2 Changes to Existing Documentation -=back +We have attempted to update the documentation to reflect the changes +listed in this document. If you find any we have missed, open an issue +at L. =head1 Internal Changes -XXX Changes which affect the interface available to C code go here. Other -significant internal changes for future core maintainers should be noted as -well. - -[ List each change as an =item entry ] - =over 4 =item * -A new API function has been added that simplifies C (or XS) code that creates -C optree fragments. C is a variadic function that takes -a C-terminated list of child op pointers, and constructs a new checked -C to contain them all. This is simpler than creating a new plain -C, adding each child individually, and finally calling -C in most code fragments. +C, C and hence C now declare C and C +as C rather than C. This reverts back to +compatibility with pre-64-bit stack support for default builds of perl +where C is C. [GH #21782] =item * -The C API now accepts the C flag, which uses -the hints such as strict and features from C instead of the -default, which is to use default hints, e.g. no C, no -strict, default features. - -Beware if you use this flag in XS code: your evaluated code will need -to support whatever strictness or features are in effect at the point -your XS function is called. - -[GH #21415] - -=back - -=head1 Selected Bug Fixes - -XXX Important bug fixes in the core language are summarized here. Bug fixes in -files in F and F are best summarized in L. - -Include references to GitHub issues and PRs as: [GH #12345] and the release -manager will later use a regex to expand these into links. - -[ List each fix as an =item entry ] - -=over 4 - -=item * - -Declared references can now be used with C variables. [GH #21351] - -=item * - -Trailing elements in an Ced and resized array will now always be -initialized. [GH #21265] - -=item * Make C respect the -X flag - -perl's -X flag disables all warnings globally, but «use 5.036» didn't -respect that until now. [GH #21431] +A new function is now available to C code, L. +This provides the same information as the existing +L, but returns an SV instead of a S>, +so that programmers don't have to concern themselves with the UTF-8ness +of the result. This new function is now the preferred interface for +C code to the L C function. From Perl space, +this information continues to be provided by the L +module. =back =head1 Known Problems -XXX Descriptions of platform agnostic bugs we know we can't fix go here. Any -tests that had to be Ced for the release would be noted here. Unfixed -platform specific bugs also go here. - -[ List each fix as an =item entry ] - =over 4 =item * -XXX +none =back -=head1 Errata From Previous Releases - -=over 4 +=head1 Acknowledgements -=item * +Perl 5.39.7 represents approximately 3 weeks of development since Perl +5.39.6 and contains approximately 7,300 lines of changes across 160 files +from 16 authors. -XXX Add anything here that we forgot to add, or were mistaken about, in -the perldelta of a previous release. +Excluding auto-generated files, documentation and release tools, there were +approximately 5,600 lines of changes to 79 .pm, .t, .c and .h files. -=back +Perl continues to flourish into its fourth decade thanks to a vibrant +community of users and developers. The following people are known to have +contributed the improvements that became Perl 5.39.7: -=head1 Obituary +Craig A. Berry, Dagfinn Ilmari Mannsåker, David Mitchell, Elvin Aslanov, +H.Merijn Brand, James E Keenan, Karen Etheridge, Karl Williamson, Mathias +Kende, Max Maischein, Peter John Acklam, Philippe Bruhat (BooK), Todd +Rinaldo, Tony Cook, Yves Orton, Дилян Палаузов. -XXX If any significant core contributor or member of the CPAN community has -died, add a short obituary here. - -=head1 Acknowledgements +The list above is almost certainly incomplete as it is automatically +generated from version control history. In particular, it does not include +the names of the (very much appreciated) contributors who reported issues to +the Perl bug tracker. -XXX Generate this with: +Many of the changes included in this version originated in the CPAN modules +included in Perl's core. We're grateful to the entire CPAN community for +helping Perl to flourish. - perl Porting/acknowledgements.pl v5.39.2..HEAD +For a more complete list of all of Perl's historical contributors, please +see the F file in the Perl source distribution. =head1 Reporting Bugs