X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/4633a7c4bad06b471d9310620b7fe8ddd158cccd..20ce7b12268a3d32b5b246928de5084322e709cf:/config_h.SH diff --git a/config_h.SH b/config_h.SH index 1d17167..1a7c363 100644 --- a/config_h.SH +++ b/config_h.SH @@ -15,7 +15,7 @@ case "$0" in */*) cd `expr X$0 : 'X\(.*\)/'` ;; esac echo "Extracting config.h (with variable substitutions)" -sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' +sed <config.h -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un-def!#undef!' /* * This file was produced by running the config_h.SH script, which * gets its values from config.sh, which is generally produced by @@ -25,70 +25,35 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * that running config_h.SH again will wipe out any changes you've made. * For a more permanent change edit config.sh and rerun config_h.SH. * - * \$Id: Config_h.U,v 3.0.1.4 1995/09/25 09:10:49 ram Exp $ + * \$Id: Config_h.U,v 3.0.1.5 1997/02/28 14:57:43 ram Exp $ */ -/* Configuration time: $cf_time - * Configured by: $cf_by - * Target system: $myuname +/* + * Package name : $package + * Source directory : $src + * Configuration time: $cf_time + * Configured by : $cf_by + * Target system : $myuname */ #ifndef _config_h_ #define _config_h_ -/* MEM_ALIGNBYTES: - * This symbol contains the number of bytes required to align a - * double. Usual values are 2, 4 and 8. +/* LOC_SED: + * This symbol holds the complete pathname to the sed program. */ -#define MEM_ALIGNBYTES $alignbytes /**/ +#define LOC_SED "$full_sed" /**/ /* BIN: * This symbol holds the path of the bin directory where the package will * be installed. Program must be prepared to deal with ~name substitution. */ -#define BIN "$bin" /**/ - -/* CAT2: - * This macro catenates 2 tokens together. - */ -#if $cpp_stuff == 1 -#define CAT2(a,b)a/**/b -#define CAT3(a,b,c)a/**/b/**/c -#define CAT4(a,b,c,d)a/**/b/**/c/**/d -#define CAT5(a,b,c,d,e)a/**/b/**/c/**/d/**/e -#define STRINGIFY(a)"a" - /* If you can get stringification with catify, tell me how! */ -#endif -#if $cpp_stuff == 42 -#define CAT2(a,b)a ## b -#define CAT3(a,b,c)a ## b ## c -#define CAT4(a,b,c,d)a ## b ## c ## d -#define CAT5(a,b,c,d,e)a ## b ## c ## d ## e -#define StGiFy(a)# a -#define STRINGIFY(a)StGiFy(a) -#define SCAT2(a,b)StGiFy(a) StGiFy(b) -#define SCAT3(a,b,c)StGiFy(a) StGiFy(b) StGiFy(c) -#define SCAT4(a,b,c,d)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) -#define SCAT5(a,b,c,d,e)StGiFy(a) StGiFy(b) StGiFy(c) StGiFy(d) StGiFy(e) -#endif -#ifndef CAT2 -#include "Bletch: How does this C preprocessor catenate tokens?" -#endif - -/* CPPSTDIN: - * This symbol contains the first part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. Typical value of "cc -E" or "/lib/cpp", but it can also - * call a wrapper. See CPPRUN. - */ -/* CPPMINUS: - * This symbol contains the second part of the string which will invoke - * the C preprocessor on the standard input and produce to standard - * output. This symbol will have the value "-" if CPPSTDIN needs a minus - * to specify standard input, otherwise the value is "". +/* BIN_EXP: + * This symbol is the filename expanded version of the BIN symbol, for + * programs that do not want to deal with that at run-time. */ -#define CPPSTDIN "$cppstdin" -#define CPPMINUS "$cppminus" +#define BIN "$bin" /**/ +#define BIN_EXP "$binexp" /**/ /* HAS_ALARM: * This symbol, if defined, indicates that the alarm routine is @@ -123,27 +88,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_bzero HAS_BZERO /**/ -/* CASTI32: - * This symbol is defined if the C compiler can cast negative - * or large floating point numbers to 32-bit ints. - */ -#$d_casti32 CASTI32 /**/ - -/* CASTNEGFLOAT: - * This symbol is defined if the C compiler can cast negative - * numbers to unsigned longs, ints and shorts. - */ -/* CASTFLAGS: - * This symbol contains flags that say what difficulties the compiler - * has casting odd floating values to unsigned long: - * 0 = ok - * 1 = couldn't cast < 0 - * 2 = couldn't cast >= 0x80000000 - * 4 = couldn't cast in argument expression list - */ -#$d_castneg CASTNEGFLOAT /**/ -#define CASTFLAGS $castflags /**/ - /* HAS_CHOWN: * This symbol, if defined, indicates that the chown routine is * available. @@ -162,12 +106,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_chsize HAS_CHSIZE /**/ -/* VOID_CLOSEDIR: - * This symbol, if defined, indicates that the closedir() routine - * does not return a value. - */ -#$d_void_closedir VOID_CLOSEDIR /**/ - /* HASCONST: * This symbol, if defined, indicates that this C compiler knows about * the const type. There is no need to actually test for that symbol @@ -286,6 +224,17 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_fsetpos HAS_FSETPOS /**/ +/* HAS_GETTIMEOFDAY: + * This symbol, if defined, indicates that the gettimeofday() system + * call is available for a sub-second accuracy clock. Usually, the file + * needs to be included (see I_SYS_RESOURCE). + * The type "Timeval" should be used to refer to "struct timeval". + */ +#$d_gettimeod HAS_GETTIMEOFDAY /**/ +#ifdef HAS_GETTIMEOFDAY +#define Timeval struct timeval /* Structure used by gettimeofday() */ +#endif + /* HAS_GETGROUPS: * This symbol, if defined, indicates that the getgroups() routine is * available to get the list of process groups. If unavailable, multiple @@ -293,30 +242,29 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_getgrps HAS_GETGROUPS /**/ -/* HAS_GETHOSTENT: - * This symbol, if defined, indicates that the gethostent routine is - * available to lookup host names in some data base or other. - */ -#$d_gethent HAS_GETHOSTENT /**/ - -/* HAS_UNAME: - * This symbol, if defined, indicates that the C program may use the - * uname() routine to derive the host name. See also HAS_GETHOSTNAME - * and PHOSTNAME. - */ -#$d_uname HAS_UNAME /**/ - /* HAS_GETLOGIN: * This symbol, if defined, indicates that the getlogin routine is * available to get the login name. */ #$d_getlogin HAS_GETLOGIN /**/ +/* HAS_GETPGID: + * This symbol, if defined, indicates to the C program that + * the getpgid(pid) function is available to get the + * process group id. + */ +#$d_getpgid HAS_GETPGID /**/ + /* HAS_GETPGRP: * This symbol, if defined, indicates that the getpgrp routine is * available to get the current process group. */ +/* USE_BSD_GETPGRP: + * This symbol, if defined, indicates that getpgrp needs one + * arguments whereas USG one needs none. + */ #$d_getpgrp HAS_GETPGRP /**/ +#$d_bsdgetpgrp USE_BSD_GETPGRP /**/ /* HAS_GETPGRP2: * This symbol, if defined, indicates that the getpgrp2() (as in DG/UX) @@ -336,36 +284,12 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_getprior HAS_GETPRIORITY /**/ -/* HAS_HTONL: - * This symbol, if defined, indicates that the htonl() routine (and - * friends htons() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_HTONS: - * This symbol, if defined, indicates that the htons() routine (and - * friends htonl() ntohl() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHL: - * This symbol, if defined, indicates that the ntohl() routine (and - * friends htonl() htons() ntohs()) are available to do network - * order byte swapping. - */ -/* HAS_NTOHS: - * This symbol, if defined, indicates that the ntohs() routine (and - * friends htonl() htons() ntohl()) are available to do network - * order byte swapping. - */ -#$d_htonl HAS_HTONL /**/ -#$d_htonl HAS_HTONS /**/ -#$d_htonl HAS_NTOHL /**/ -#$d_htonl HAS_NTOHS /**/ - -/* HAS_ISASCII: - * This manifest constant lets the C program know that isascii - * is available. +/* HAS_INET_ATON: + * This symbol, if defined, indicates to the C program that the + * inet_aton() function is available to parse IP address "dotted-quad" + * strings. */ -#$d_isascii HAS_ISASCII /**/ +#$d_inetaton HAS_INET_ATON /**/ /* HAS_KILLPG: * This symbol, if defined, indicates that the killpg routine is available @@ -463,11 +387,17 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_mktime HAS_MKTIME /**/ -/* HAS_MSG: - * This symbol, if defined, indicates that the entire msg*(2) library is - * supported (IPC mechanism based on message queues). +/* HAS_MSYNC: + * This symbol, if defined, indicates that the msync system call is + * available to synchronize a mapped file. */ -#$d_msg HAS_MSG /**/ +#$d_msync HAS_MSYNC /**/ + +/* HAS_MUNMAP: + * This symbol, if defined, indicates that the munmap system call is + * available to unmap a region, usually mapped by mmap(). + */ +#$d_munmap HAS_MUNMAP /**/ /* HAS_NICE: * This symbol, if defined, indicates that the nice routine is @@ -475,12 +405,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_nice HAS_NICE /**/ -/* HAS_OPEN3: - * This manifest constant lets the C program know that the three - * argument form of open(2) is available. - */ -#$d_open3 HAS_OPEN3 /**/ - /* HAS_PATHCONF: * This symbol, if defined, indicates that pathconf() is available * to determine file-system related limits and options associated @@ -508,7 +432,8 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' /* HAS_POLL: * This symbol, if defined, indicates that the poll routine is - * available to poll active file descriptors. + * available to poll active file descriptors. You may safely + * include when this symbol is defined. */ #$d_poll HAS_POLL /**/ @@ -557,22 +482,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_rmdir HAS_RMDIR /**/ -/* HAS_SAFE_BCOPY: - * This symbol, if defined, indicates that the bcopy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safebcpy HAS_SAFE_BCOPY /**/ - -/* HAS_SAFE_MEMCPY: - * This symbol, if defined, indicates that the memcpy routine is available - * to copy potentially overlapping memory blocks. Otherwise you should - * probably use memmove() or memcpy(). If neither is defined, roll your - * own version. - */ -#$d_safemcpy HAS_SAFE_MEMCPY /**/ - /* HAS_SELECT: * This symbol, if defined, indicates that the select routine is * available to select active file descriptors. If the timeout field @@ -580,12 +489,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_select HAS_SELECT /**/ -/* HAS_SEM: - * This symbol, if defined, indicates that the entire sem*(2) library is - * supported. - */ -#$d_sem HAS_SEM /**/ - /* HAS_SETEGID: * This symbol, if defined, indicates that the setegid routine is available * to change the effective gid of the current program. @@ -612,8 +515,8 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #$d_setlocale HAS_SETLOCALE /**/ /* HAS_SETPGID: - * This symbol, if defined, indicates that the setpgid routine is - * available to set process group ID. + * This symbol, if defined, indicates that the setpgid(pid, gpid) + * routine is available to set process group ID. */ #$d_setpgid HAS_SETPGID /**/ @@ -621,13 +524,13 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' * This symbol, if defined, indicates that the setpgrp routine is * available to set the current process group. */ -/* USE_BSDPGRP: - * This symbol, if defined, indicates that the BSD notion of process - * group is to be used. For instance, you have to say setpgrp(pid, pgrp) - * instead of the USG setpgrp(). +/* USE_BSD_SETPGRP: + * This symbol, if defined, indicates that setpgrp needs two + * arguments whereas USG one needs none. See also HAS_SETPGID + * for a POSIX interface. */ #$d_setpgrp HAS_SETPGRP /**/ -#$d_bsdpgrp USE_BSDPGRP /**/ +#$d_bsdsetpgrp USE_BSD_SETPGRP /**/ /* HAS_SETPGRP2: * This symbol, if defined, indicates that the setpgrp2() (as in DG/UX) @@ -685,12 +588,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_setsid HAS_SETSID /**/ -/* HAS_SHM: - * This symbol, if defined, indicates that the entire shm*(2) library is - * supported. - */ -#$d_shm HAS_SHM /**/ - /* Shmat_t: * This symbol holds the return type of the shmat() system call. * Usually set to 'void *' or 'char *'. @@ -698,90 +595,13 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' /* HAS_SHMAT_PROTOTYPE: * This symbol, if defined, indicates that the sys/shm.h includes * a prototype for shmat(). Otherwise, it is up to the program to - * guess one. Shmat_t shmat _((int, Shmat_t, int)) is a good guess, + * guess one. Shmat_t shmat (int, Shmat_t, int) is a good guess, * but not always right so it should be emitted by the program only * when HAS_SHMAT_PROTOTYPE is not defined to avoid conflicting defs. */ #define Shmat_t $shmattype /**/ #$d_shmatprototype HAS_SHMAT_PROTOTYPE /**/ -/* HAS_SOCKET: - * This symbol, if defined, indicates that the BSD socket interface is - * supported. - */ -/* HAS_SOCKETPAIR: - * This symbol, if defined, indicates that the BSD socketpair() call is - * supported. - */ -#$d_socket HAS_SOCKET /**/ -#$d_sockpair HAS_SOCKETPAIR /**/ - -/* USE_STAT_BLOCKS: - * This symbol is defined if this system has a stat structure declaring - * st_blksize and st_blocks. - */ -#$d_statblks USE_STAT_BLOCKS /**/ - -/* USE_STDIO_PTR: - * This symbol is defined if the _ptr and _cnt fields (or similar) - * of the stdio FILE structure can be used to access the stdio buffer - * for a file handle. If this is defined, then the FILE_ptr(fp) - * and FILE_cnt(fp) macros will also be defined and should be used - * to access these fields. - */ -/* USE_STDIO_BASE: - * This symbol is defined if the _base field (or similar) of the - * stdio FILE structure can be used to access the stdio buffer for - * a file handle. If this is defined, then the FILE_base(fp) macro - * will also be defined and should be used to access this field. - * Also, the FILE_bufsiz(fp) macro will be defined and should be used - * to determine the number of bytes in the buffer. USE_STDIO_BASE - * will never be defined unless USE_STDIO_PTR is. - */ -#$d_stdstdio USE_STDIO_PTR /**/ -#$d_stdiobase USE_STDIO_BASE /**/ - -/* FILE_ptr: - * This macro is used to access the _ptr field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_PTR_LVALUE: - * This symbol is defined if the FILE_ptr macro can be used as an - * lvalue. - */ -/* FILE_cnt: - * This macro is used to access the _cnt field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_PTR is defined. - */ -/* STDIO_CNT_LVALUE: - * This symbol is defined if the FILE_cnt macro can be used as an - * lvalue. - */ -#ifdef USE_STDIO_PTR -#define FILE_ptr(fp) $stdio_ptr -#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ -#define FILE_cnt(fp) $stdio_cnt -#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ -#endif - -/* FILE_base: - * This macro is used to access the _base field (or equivalent) of the - * FILE structure pointed to by its argument. This macro will always be - * defined if USE_STDIO_BASE is defined. - */ -/* FILE_bufsiz: - * This macro is used to determine the number of bytes in the I/O - * buffer pointed to by _base field (or equivalent) of the FILE - * structure pointed to its argument. This macro will always be defined - * if USE_STDIO_BASE is defined. - */ -#ifdef USE_STDIO_BASE -#define FILE_base(fp) $stdio_base -#define FILE_bufsiz(fp) $stdio_bufsiz -#endif - /* HAS_STRCHR: * This symbol is defined to indicate that the strchr()/strrchr() * functions are available for string searching. If not, try the @@ -807,24 +627,23 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_strctcpy USE_STRUCT_COPY /**/ -/* HAS_STRERROR: - * This symbol, if defined, indicates that the strerror routine is - * available to translate error numbers to strings. See the writeup - * of Strerror() in this file before you try to define your own. +/* HAS_STRTOD: + * This symbol, if defined, indicates that the strtod routine is + * available to provide better numeric string conversion than atof(). */ -/* HAS_SYS_ERRLIST: - * This symbol, if defined, indicates that the sys_errlist array is - * available to translate error numbers to strings. The extern int - * sys_nerr gives the size of that table. +#$d_strtod HAS_STRTOD /**/ + +/* HAS_STRTOL: + * This symbol, if defined, indicates that the strtol routine is available + * to provide better numeric string conversion than atoi() and friends. */ -/* Strerror: - * This preprocessor symbol is defined as a macro if strerror() is - * not available to translate error numbers to strings but sys_errlist[] - * array is there. +#$d_strtol HAS_STRTOL /**/ + +/* HAS_STRTOUL: + * This symbol, if defined, indicates that the strtoul routine is + * available to provide conversion of strings to unsigned long. */ -#$d_strerror HAS_STRERROR /**/ -#$d_syserrlst HAS_SYS_ERRLIST /**/ -#define Strerror(e) $d_strerrm +#$d_strtoul HAS_STRTOUL /**/ /* HAS_STRXFRM: * This symbol, if defined, indicates that the strxfrm() routine is @@ -868,25 +687,11 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_tcsetpgrp HAS_TCSETPGRP /**/ -/* Time_t: - * This symbol holds the type returned by time(). It can be long, - * or time_t on BSD sites (in which case should be - * included). +/* HAS_TRUNCATE: + * This symbol, if defined, indicates that the truncate routine is + * available to truncate files. */ -#define Time_t $timetype /* Time type */ - -/* HAS_TIMES: - * This symbol, if defined, indicates that the times() routine exists. - * Note that this became obsolete on some systems (SUNOS), which now - * use getrusage(). It may be necessary to include . - */ -#$d_times HAS_TIMES /**/ - -/* HAS_TRUNCATE: - * This symbol, if defined, indicates that the truncate routine is - * available to truncate files. - */ -#$d_truncate HAS_TRUNCATE /**/ +#$d_truncate HAS_TRUNCATE /**/ /* HAS_TZNAME: * This symbol, if defined, indicates that the tzname[] array is @@ -900,19 +705,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_umask HAS_UMASK /**/ -/* HAS_VFORK: - * This symbol, if defined, indicates that vfork() exists. - */ -#$d_vfork HAS_VFORK /**/ - -/* Signal_t: - * This symbol's value is either "void" or "int", corresponding to the - * appropriate return type of a signal handler. Thus, you can declare - * a signal handler using "Signal_t (*handler)()", and define the - * handler using "Signal_t handler(sig)". - */ -#define Signal_t $signal_t /* Signal handler's return type */ - /* HASVOLATILE: * This symbol, if defined, indicates that this C compiler knows about * the volatile declaration. @@ -922,20 +714,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #define volatile #endif -/* HAS_VPRINTF: - * This symbol, if defined, indicates that the vprintf routine is available - * to printf with a pointer to an argument list. If unavailable, you - * may need to write your own, probably in terms of _doprnt(). - */ -/* USE_CHAR_VSPRINTF: - * This symbol is defined if this system has vsprintf() returning type - * (char*). The trend seems to be to declare it as "int vsprintf()". It - * is up to the package author to declare vsprintf correctly based on the - * symbol. - */ -#$d_vprintf HAS_VPRINTF /**/ -#$d_charvspr USE_CHAR_VSPRINTF /**/ - /* HAS_WAIT4: * This symbol, if defined, indicates that wait4() exists. */ @@ -959,46 +737,22 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$d_wctomb HAS_WCTOMB /**/ -/* Fpos_t: - * This symbol holds the type used to declare file positions in libc. - * It can be fpos_t, long, uint, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Fpos_t $fpostype /* File position type */ - -/* Gid_t: - * This symbol holds the return type of getgid() and the type of - * argument to setrgid() and related functions. Typically, - * it is the type of group ids in the kernel. It can be int, ushort, - * uid_t, etc... It may be necessary to include to get - * any typedef'ed information. - */ -#define Gid_t $gidtype /* Type for getgid(), etc... */ - -/* Groups_t: - * This symbol holds the type used for the second argument to - * getgroups(). Usually, this is the same of gidtype, but - * sometimes it isn't. It can be int, ushort, uid_t, etc... - * It may be necessary to include to get any - * typedef'ed information. This is only required if you have - * getgroups(). +/* I_ARPA_INET: + * This symbol, if defined, indicates to the C program that it should + * include to get inet_addr and friends declarations. */ -#ifdef HAS_GETGROUPS -#define Groups_t $groupstype /* Type for 2nd arg to getgroups() */ -#endif +#$i_arpainet I_ARPA_INET /**/ -/* DB_Prefix_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is u_int32_t. +/* I_DBM: + * This symbol, if defined, indicates that exists and should + * be included. */ -/* DB_Hash_t: - * This symbol contains the type of the prefix structure element - * in the header file. In older versions of DB, it was - * int, while in newer ones it is size_t. +/* I_RPCSVC_DBM: + * This symbol, if defined, indicates that exists and + * should be included. */ -#define DB_Hash_t $db_hashtype /**/ -#define DB_Prefix_t $db_prefixtype /**/ +#$i_dbm I_DBM /**/ +#$i_rpcsvcdbm I_RPCSVC_DBM /**/ /* I_DIRENT: * This symbol, if defined, indicates to the C program that it should @@ -1038,12 +792,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_float I_FLOAT /**/ -/* I_GRP: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -#$i_grp I_GRP /**/ - /* I_LIMITS: * This symbol, if defined, indicates to the C program that it should * include to get definition of symbols like WORD_BIT or @@ -1051,6 +799,12 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_limits I_LIMITS /**/ +/* I_LOCALE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_locale I_LOCALE /**/ + /* I_MATH: * This symbol, if defined, indicates to the C program that it should * include . @@ -1081,41 +835,11 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_niin I_NETINET_IN /**/ -/* I_PWD: +/* I_SFIO: * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* PWQUOTA: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_quota. - */ -/* PWAGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_age. - */ -/* PWCHANGE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_change. - */ -/* PWCLASS: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_class. - */ -/* PWEXPIRE: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_expire. - */ -/* PWCOMMENT: - * This symbol, if defined, indicates to the C program that struct passwd - * contains pw_comment. + * include . */ -#$i_pwd I_PWD /**/ -#$d_pwquota PWQUOTA /**/ -#$d_pwage PWAGE /**/ -#$d_pwchange PWCHANGE /**/ -#$d_pwclass PWCLASS /**/ -#$d_pwexpire PWEXPIRE /**/ -#$d_pwcomment PWCOMMENT /**/ +#$i_sfio I_SFIO /**/ /* I_STDDEF: * This symbol, if defined, indicates that exists and should @@ -1165,12 +889,24 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_sysparam I_SYS_PARAM /**/ +/* I_SYS_RESOURCE: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_sysresrc I_SYS_RESOURCE /**/ + /* I_SYS_SELECT: * This symbol, if defined, indicates to the C program that it should * include in order to get definition of struct timeval. */ #$i_sysselct I_SYS_SELECT /**/ +/* I_SYS_STAT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_sysstat I_SYS_STAT /**/ + /* I_SYS_TIMES: * This symbol, if defined, indicates to the C program that it should * include . @@ -1183,6 +919,18 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_systypes I_SYS_TYPES /**/ +/* I_SYS_UN: + * This symbol, if defined, indicates to the C program that it should + * include to get UNIX domain socket definitions. + */ +#$i_sysun I_SYS_UN /**/ + +/* I_SYS_WAIT: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_syswait I_SYS_WAIT /**/ + /* I_TERMIO: * This symbol, if defined, indicates that the program should include * rather than . There are also differences in @@ -1203,22 +951,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #$i_termios I_TERMIOS /**/ #$i_sgtty I_SGTTY /**/ -/* I_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME: - * This symbol, if defined, indicates to the C program that it should - * include . - */ -/* I_SYS_TIME_KERNEL: - * This symbol, if defined, indicates to the C program that it should - * include with KERNEL defined. - */ -#$i_time I_TIME /**/ -#$i_systime I_SYS_TIME /**/ -#$i_systimek I_SYS_TIME_KERNEL /**/ - /* I_UNISTD: * This symbol, if defined, indicates to the C program that it should * include . @@ -1231,6 +963,14 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_utime I_UTIME /**/ +/* I_VALUES: + * This symbol, if defined, indicates to the C program that it should + * include to get definition of symbols like MINFLOAT or + * MAXLONG, i.e. machine dependant limitations. Probably, you + * should use instead, if it is available. + */ +#$i_values I_VALUES /**/ + /* I_STDARG: * This symbol, if defined, indicates that exists and should * be included. @@ -1248,48 +988,6 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #$i_vfork I_VFORK /**/ -/* Off_t: - * This symbol holds the type used to declare offsets in the kernel. - * It can be int, long, off_t, etc... It may be necessary to include - * to get any typedef'ed information. - */ -#define Off_t $lseektype /* type */ - -/* Mode_t: - * This symbol holds the type used to declare file modes - * for systems calls. It is usually mode_t, but may be - * int or unsigned short. It may be necessary to include - * to get any typedef'ed information. - */ -#define Mode_t $modetype /* file mode parameter for system calls */ - -/* VAL_O_NONBLOCK: - * This symbol is to be used during open() or fcntl(F_SETFL) to turn on - * non-blocking I/O for the file descriptor. Note that there is no way - * back, i.e. you cannot turn it blocking again this way. If you wish to - * alternatively switch between blocking and non-blocking, use the - * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. - */ -/* VAL_EAGAIN: - * This symbol holds the errno error code set by read() when no data was - * present on the non-blocking file descriptor. - */ -/* RD_NODATA: - * This symbol holds the return code from read() when no data is present - * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is - * not defined, then you can't distinguish between no data and EOF by - * issuing a read(). You'll have to find another way to tell for sure! - */ -/* EOF_NONBLOCK: - * This symbol, if defined, indicates to the C program that a read() on - * a non-blocking file descriptor will return 0 on EOF, and not the value - * held in RD_NODATA (-1 usually, in that case!). - */ -#define VAL_O_NONBLOCK $o_nonblock -#define VAL_EAGAIN $eagain -#define RD_NODATA $rd_nodata -#$d_eofnblk EOF_NONBLOCK - /* CAN_PROTOTYPE: * If defined, this macro indicates that the C compiler can handle * function prototypes. @@ -1308,95 +1006,162 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' #define _(args) () #endif -/* RANDBITS: - * This symbol contains the number of bits of random number the rand() - * function produces. Usual values are 15, 16, and 31. +/* SH_PATH: + * This symbol contains the full pathname to the shell used on this + * on this system to execute Bourne shell scripts. Usually, this will be + * /bin/sh, though it's possible that some systems will have /bin/ksh, + * /bin/pdksh, /bin/ash, /bin/bash, or even something such as + * D:/bin/sh.exe. */ -#define RANDBITS $randbits /**/ +#define SH_PATH "$sh" /**/ -/* SCRIPTDIR: - * This symbol holds the name of the directory in which the user wants - * to put publicly executable scripts for the package in question. It - * is often a directory that is mounted across diverse architectures. - * Programs must be prepared to deal with ~name expansion. +/* STDCHAR: + * This symbol is defined to be the type of char used in stdio.h. + * It has the values "unsigned char" or "char". */ -#define SCRIPTDIR "$scriptdir" /**/ +#define STDCHAR $stdchar /**/ -/* Select_fd_set_t: - * This symbol holds the type used for the 2nd, 3rd, and 4th - * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET - * is defined, and 'int *' otherwise. This is only useful if you - * have select(), of course. +/* HAS_ACCESSX: + * This symbol, if defined, indicates that the accessx routine is + * available to do extended access checks. */ -#define Select_fd_set_t $selecttype /**/ +#$d_accessx HAS_ACCESSX /**/ -/* Size_t: - * This symbol holds the type used to declare length parameters - * for string functions. It is usually size_t, but may be - * unsigned long, int, etc. It may be necessary to include - * to get any typedef'ed information. +/* HAS_EACCESS: + * This symbol, if defined, indicates that the eaccess routine is + * available to do extended access checks. */ -#define Size_t $sizetype /* length paramater for string functions */ +#$d_eaccess HAS_EACCESS /**/ -/* SSize_t: - * This symbol holds the type used by functions that return - * a count of bytes or an error condition. It must be a signed type. - * It is usually ssize_t, but may be long or int, etc. - * It may be necessary to include or - * to get any typedef'ed information. - * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). +/* I_SYS_ACCESS: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#define SSize_t $ssizetype /* signed count of bytes */ +#$i_sysaccess I_SYS_ACCESS /**/ -/* STDCHAR: - * This symbol is defined to be the type of char used in stdio.h. - * It has the values "unsigned char" or "char". +/* I_SYS_SECURITY: + * This symbol, if defined, indicates to the C program that it should + * include . */ -#define STDCHAR $stdchar /**/ +#$i_syssecrt I_SYS_SECURITY /**/ -/* Uid_t: - * This symbol holds the type used to declare user ids in the kernel. - * It can be int, ushort, uid_t, etc... It may be necessary to include - * to get any typedef'ed information. +/* CROSSCOMPILE: + * This symbol, if defined, signifies that we our + * build process is a cross-compilation. */ -#define Uid_t $uidtype /* UID type */ +#$crosscompile CROSSCOMPILE /**/ -/* VMS: - * This symbol, if defined, indicates that the program is running under - * VMS. It is currently only set in conjunction with the EUNICE symbol. +/* INTSIZE: + * This symbol contains the value of sizeof(int) so that the C + * preprocessor can make decisions based on it. */ -#$d_eunice VMS /**/ +/* LONGSIZE: + * This symbol contains the value of sizeof(long) so that the C + * preprocessor can make decisions based on it. + */ +/* SHORTSIZE: + * This symbol contains the value of sizeof(short) so that the C + * preprocessor can make decisions based on it. + */ +#define INTSIZE $intsize /**/ +#define LONGSIZE $longsize /**/ +#define SHORTSIZE $shortsize /**/ -/* LOC_SED: - * This symbol holds the complete pathname to the sed program. +/* MULTIARCH: + * This symbol, if defined, signifies that the build + * process will produce some binary files that are going to be + * used in a cross-platform environment. This is the case for + * example with the NeXT "fat" binaries that contain executables + * for several CPUs. */ -#define LOC_SED "$full_sed" /**/ +#$multiarch MULTIARCH /**/ -/* ARCHLIB_EXP: - * This symbol contains the ~name expanded version of ARCHLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* MEM_ALIGNBYTES: + * This symbol contains the number of bytes required to align a + * double. Usual values are 2, 4 and 8. The default is eight, + * for safety. */ -#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# define MEM_ALIGNBYTES 8 +#else +#define MEM_ALIGNBYTES $alignbytes +#endif /* BYTEORDER: - * This symbol hold the hexadecimal constant defined in byteorder, + * This symbol holds the hexadecimal constant defined in byteorder, * i.e. 0x1234 or 0x4321, etc... - */ + * If the compiler supports cross-compiling or multiple-architecture + * binaries (eg. on NeXT systems), use compiler-defined macros to + * determine the byte order. + * On NeXT 3.2 (and greater), you can build "Fat" Multiple Architecture + * Binaries (MAB) on either big endian or little endian machines. + * The endian-ness is available at compile-time. This only matters + * for perl, where the config.h can be generated and installed on + * one system, and used by a different architecture to build an + * extension. Older versions of NeXT that might not have + * defined either *_ENDIAN__ were all on Motorola 680x0 series, + * so the default case (for NeXT) is big endian to catch them. + * This might matter for NeXT 3.0. + */ +#if defined(CROSSCOMPILE) || defined(MULTIARCH) +# ifdef __LITTLE_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x1234 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x12345678 +# endif +# endif +# else +# ifdef __BIG_ENDIAN__ +# if LONGSIZE == 4 +# define BYTEORDER 0x4321 +# else +# if LONGSIZE == 8 +# define BYTEORDER 0x87654321 +# endif +# endif +# endif +# endif +# if !defined(BYTEORDER) && (defined(NeXT) || defined(__NeXT__)) +# define BYTEORDER 0x4321 +# endif +#else #define BYTEORDER 0x$byteorder /* large digits for MSB */ +#endif /* NeXT */ -/* CSH: - * This symbol, if defined, indicates that the C-shell exists. - * If defined, contains the full pathname of csh. +/* CASTI32: + * This symbol is defined if the C compiler can cast negative + * or large floating point numbers to 32-bit ints. */ -#$d_csh CSH "$full_csh" /**/ +#$d_casti32 CASTI32 /**/ -/* DLSYM_NEEDS_UNDERSCORE: - * This symbol, if defined, indicates that we need to prepend an - * underscore to the symbol name before calling dlsym(). This only - * makes sense if you *have* dlsym, which we will presume is the - * case if you're using dl_dlopen.xs. +/* CASTNEGFLOAT: + * This symbol is defined if the C compiler can cast negative + * numbers to unsigned longs, ints and shorts. + */ +/* CASTFLAGS: + * This symbol contains flags that say what difficulties the compiler + * has casting odd floating values to unsigned long: + * 0 = ok + * 1 = couldn't cast < 0 + * 2 = couldn't cast >= 0x80000000 + * 4 = couldn't cast in argument expression list + */ +#$d_castneg CASTNEGFLOAT /**/ +#define CASTFLAGS $castflags /**/ + +/* VOID_CLOSEDIR: + * This symbol, if defined, indicates that the closedir() routine + * does not return a value. + */ +#$d_void_closedir VOID_CLOSEDIR /**/ + +/* HAS_FD_SET: + * This symbol, when defined, indicates presence of the fd_set typedef + * in */ -#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /* */ +#$d_fd_set HAS_FD_SET /**/ /* Gconvert: * This preprocessor macro is defined to convert a floating point @@ -1415,130 +1180,1551 @@ sed <config.h -e 's!^#undef!/\*#define!' -e 's!^#un-def!#undef!' */ #define Gconvert(x,n,t,b) $d_Gconvert -/* USE_DYNAMIC_LOADING: - * This symbol, if defined, indicates that dynamic loading of - * some sort is available. +/* HAS_GNULIBC: + * This symbol, if defined, indicates to the C program that + * the GNU C library is being used. */ -#$usedl USE_DYNAMIC_LOADING /**/ +#$d_gnulibc HAS_GNULIBC /**/ +/* HAS_ISASCII: + * This manifest constant lets the C program know that isascii + * is available. + */ +#$d_isascii HAS_ISASCII /**/ -/* I_DBM: - * This symbol, if defined, indicates that exists and should - * be included. +/* HAS_LCHOWN: + * This symbol, if defined, indicates that the lchown routine is + * available to operate on a symbolic link (instead of following the + * link). */ -/* I_RPCSVC_DBM: - * This symbol, if defined, indicates that exists and - * should be included. +#$d_lchown HAS_LCHOWN /**/ + +/* HAS_OPEN3: + * This manifest constant lets the C program know that the three + * argument form of open(2) is available. */ -#$i_dbm I_DBM /**/ -#$i_rpcsvcdbm I_RPCSVC_DBM /**/ +#$d_open3 HAS_OPEN3 /**/ -/* I_LOCALE: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_SAFE_BCOPY: + * This symbol, if defined, indicates that the bcopy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -#$i_locale I_LOCALE /**/ +#$d_safebcpy HAS_SAFE_BCOPY /**/ -/* I_SYS_STAT: - * This symbol, if defined, indicates to the C program that it should - * include . +/* HAS_SAFE_MEMCPY: + * This symbol, if defined, indicates that the memcpy routine is available + * to copy potentially overlapping memory blocks. Otherwise you should + * probably use memmove() or memcpy(). If neither is defined, roll your + * own version. */ -#$i_sysstat I_SYS_STAT /**/ +#$d_safemcpy HAS_SAFE_MEMCPY /**/ -/* INTSIZE: - * This symbol contains the size of an int, so that the C preprocessor - * can make decisions based on it. +/* HAS_SANE_MEMCMP: + * This symbol, if defined, indicates that the memcmp routine is available + * and can be used to compare relative magnitudes of chars with their high + * bits set. If it is not defined, roll your own version. */ -#define INTSIZE $intsize /**/ +#$d_sanemcmp HAS_SANE_MEMCMP /**/ -/* Free_t: - * This variable contains the return type of free(). It is usually - * void, but occasionally int. +/* HAS_SIGACTION: + * This symbol, if defined, indicates that Vr4's sigaction() routine + * is available. */ -/* Malloc_t: - * This symbol is the type of pointer returned by malloc and realloc. +#$d_sigaction HAS_SIGACTION /**/ + +/* HAS_SIGSETJMP: + * This variable indicates to the C program that the sigsetjmp() + * routine is available to save the calling process's registers + * and stack environment for later use by siglongjmp(), and + * to optionally save the process's signal mask. See + * Sigjmp_buf, Sigsetjmp, and Siglongjmp. + */ +/* Sigjmp_buf: + * This is the buffer type to be used with Sigsetjmp and Siglongjmp. + */ +/* Sigsetjmp: + * This macro is used in the same way as sigsetjmp(), but will invoke + * traditional setjmp() if sigsetjmp isn't available. + * See HAS_SIGSETJMP. + */ +/* Siglongjmp: + * This macro is used in the same way as siglongjmp(), but will invoke + * traditional longjmp() if siglongjmp isn't available. + * See HAS_SIGSETJMP. + */ +#$d_sigsetjmp HAS_SIGSETJMP /**/ +#ifdef HAS_SIGSETJMP +#define Sigjmp_buf sigjmp_buf +#define Sigsetjmp(buf,save_mask) sigsetjmp((buf),(save_mask)) +#define Siglongjmp(buf,retval) siglongjmp((buf),(retval)) +#else +#define Sigjmp_buf jmp_buf +#define Sigsetjmp(buf,save_mask) setjmp((buf)) +#define Siglongjmp(buf,retval) longjmp((buf),(retval)) +#endif + +/* USE_STDIO_PTR: + * This symbol is defined if the _ptr and _cnt fields (or similar) + * of the stdio FILE structure can be used to access the stdio buffer + * for a file handle. If this is defined, then the FILE_ptr(fp) + * and FILE_cnt(fp) macros will also be defined and should be used + * to access these fields. */ -#define Malloc_t $malloctype /**/ -#define Free_t $freetype /**/ +/* FILE_ptr: + * This macro is used to access the _ptr field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_PTR_LVALUE: + * This symbol is defined if the FILE_ptr macro can be used as an + * lvalue. + */ +/* FILE_cnt: + * This macro is used to access the _cnt field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_PTR is defined. + */ +/* STDIO_CNT_LVALUE: + * This symbol is defined if the FILE_cnt macro can be used as an + * lvalue. + */ +#$d_stdstdio USE_STDIO_PTR /**/ +#ifdef USE_STDIO_PTR +#define FILE_ptr(fp) $stdio_ptr +#$d_stdio_ptr_lval STDIO_PTR_LVALUE /**/ +#define FILE_cnt(fp) $stdio_cnt +#$d_stdio_cnt_lval STDIO_CNT_LVALUE /**/ +#endif -/* MYMALLOC: - * This symbol, if defined, indicates that we're using our own malloc. +/* USE_STDIO_BASE: + * This symbol is defined if the _base field (or similar) of the + * stdio FILE structure can be used to access the stdio buffer for + * a file handle. If this is defined, then the FILE_base(fp) macro + * will also be defined and should be used to access this field. + * Also, the FILE_bufsiz(fp) macro will be defined and should be used + * to determine the number of bytes in the buffer. USE_STDIO_BASE + * will never be defined unless USE_STDIO_PTR is. */ -#$d_mymalloc MYMALLOC /**/ +/* FILE_base: + * This macro is used to access the _base field (or equivalent) of the + * FILE structure pointed to by its argument. This macro will always be + * defined if USE_STDIO_BASE is defined. + */ +/* FILE_bufsiz: + * This macro is used to determine the number of bytes in the I/O + * buffer pointed to by _base field (or equivalent) of the FILE + * structure pointed to its argument. This macro will always be defined + * if USE_STDIO_BASE is defined. + */ +#$d_stdiobase USE_STDIO_BASE /**/ +#ifdef USE_STDIO_BASE +#define FILE_base(fp) $stdio_base +#define FILE_bufsiz(fp) $stdio_bufsiz +#endif -/* OLDARCHLIB_EXP: - * This symbol contains the ~name expanded version of OLDARCHLIB, to be - * used in programs that are not prepared to deal with ~ expansion at - * run-time. +/* HAS_VPRINTF: + * This symbol, if defined, indicates that the vprintf routine is available + * to printf with a pointer to an argument list. If unavailable, you + * may need to write your own, probably in terms of _doprnt(). + */ +/* USE_CHAR_VSPRINTF: + * This symbol is defined if this system has vsprintf() returning type + * (char*). The trend seems to be to declare it as "int vsprintf()". It + * is up to the package author to declare vsprintf correctly based on the + * symbol. */ -#$d_oldarchlib OLDARCHLIB_EXP "$oldarchlibexp" /**/ +#$d_vprintf HAS_VPRINTF /**/ +#$d_charvspr USE_CHAR_VSPRINTF /**/ -/* PRIVLIB_EXP: - * This symbol contains the ~name expanded version of PRIVLIB, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* DOUBLESIZE: + * This symbol contains the size of a double, so that the C preprocessor + * can make decisions based on it. */ -#define PRIVLIB_EXP "$privlibexp" /**/ +#define DOUBLESIZE $doublesize /**/ -/* SIG_NAME: - * This symbol contains a list of signal names in order of - * signal number. This is intended - * to be used as a static array initialization, like this: - * char *sig_name[] = { SIG_NAME }; - * The signals in the list are separated with commas, and each signal - * is surrounded by double quotes. There is no leading SIG in the signal - * name, i.e. SIGQUIT is known as "QUIT". - * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, - * etc., where nn is the actual signal number (e.g. NUM37). - * The signal number for sig_name[i] is stored in sig_num[i]. - * The last element is 0 to terminate the list with a NULL. This - * corresponds to the 0 at the end of the sig_num list. +/* I_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . */ -/* SIG_NUM: - * This symbol contains a list of signal numbers, in the same order as the - * SIG_NAME list. It is suitable for static array initialization, as in: - * int sig_num[] = { SIG_NUM }; - * The signals in the list are separated with commas, and the indices - * within that list and the SIG_NAME list match, so it's easy to compute - * the signal name from a number or vice versa at the price of a small - * dynamic linear lookup. - * Duplicates are allowed, but are moved to the end of the list. - * The signal number corresponding to sig_name[i] is sig_number[i]. - * if (i < NSIG) then sig_number[i] == i. - * The last element is 0, corresponding to the 0 at the end of - * the sig_name list. +/* I_SYS_TIME: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* I_SYS_TIME_KERNEL: + * This symbol, if defined, indicates to the C program that it should + * include with KERNEL defined. */ -#define SIG_NAME "`echo $sig_name | sed 's/ /","/g'`",0 /**/ -#define SIG_NUM `echo $sig_num 0 | sed 's/ /,/g'` /**/ +#$i_time I_TIME /**/ +#$i_systime I_SYS_TIME /**/ +#$i_systimek I_SYS_TIME_KERNEL /**/ -/* SITEARCH_EXP: - * This symbol contains the ~name expanded version of SITEARCH, to be used - * in programs that are not prepared to deal with ~ expansion at run-time. +/* VAL_O_NONBLOCK: + * This symbol is to be used during open() or fcntl(F_SETFL) to turn on + * non-blocking I/O for the file descriptor. Note that there is no way + * back, i.e. you cannot turn it blocking again this way. If you wish to + * alternatively switch between blocking and non-blocking, use the + * ioctl(FIOSNBIO) call instead, but that is not supported by all devices. */ -#define SITEARCH_EXP "$sitearchexp" /**/ +/* VAL_EAGAIN: + * This symbol holds the errno error code set by read() when no data was + * present on the non-blocking file descriptor. + */ +/* RD_NODATA: + * This symbol holds the return code from read() when no data is present + * on the non-blocking file descriptor. Be careful! If EOF_NONBLOCK is + * not defined, then you can't distinguish between no data and EOF by + * issuing a read(). You'll have to find another way to tell for sure! + */ +/* EOF_NONBLOCK: + * This symbol, if defined, indicates to the C program that a read() on + * a non-blocking file descriptor will return 0 on EOF, and not the value + * held in RD_NODATA (-1 usually, in that case!). + */ +#define VAL_O_NONBLOCK $o_nonblock +#define VAL_EAGAIN $eagain +#define RD_NODATA $rd_nodata +#$d_eofnblk EOF_NONBLOCK -/* VOIDFLAGS: - * This symbol indicates how much support of the void type is given by this - * compiler. What various bits mean: - * - * 1 = supports declaration of void - * 2 = supports arrays of pointers to functions returning void - * 4 = supports comparisons between pointers to void functions and - * addresses of void functions - * 8 = suports declaration of generic void pointers - * - * The package designer should define VOIDUSED to indicate the requirements - * of the package. This can be done either by #defining VOIDUSED before - * including config.h, or by defining defvoidused in Myinit.U. If the - * latter approach is taken, only those flags will be tested. If the - * level of void support necessary is not present, defines void to int. +/* PTRSIZE: + * This symbol contains the size of a pointer, so that the C preprocessor + * can make decisions based on it. It will be sizeof(void *) if + * the compiler supports (void *); otherwise it will be + * sizeof(char *). */ -#ifndef VOIDUSED -#define VOIDUSED $defvoidused -#endif -#define VOIDFLAGS $voidflags -#if (VOIDFLAGS & VOIDUSED) != VOIDUSED -#define void int /* is void to be avoided? */ -#define M_VOID /* Xenix strikes again */ -#endif +#define PTRSIZE $ptrsize /**/ + +/* Drand01: + * This macro is to be used to generate uniformly distributed + * random numbers over the range [0., 1.[. You may have to supply + * an 'extern double drand48();' in your program since SunOS 4.1.3 + * doesn't provide you with anything relevant in it's headers. + * See HAS_DRAND48_PROTO. + */ +/* Rand_seed_t: + * This symbol defines the type of the argument of the + * random seed function. + */ +/* seedDrand01: + * This symbol defines the macro to be used in seeding the + * random number generator (see Drand01). + */ +/* RANDBITS: + * This symbol indicates how many bits are produced by the + * function used to generate normalized random numbers. + * Values include 15, 16, 31, and 48. + */ +#define Drand01() $drand01 /**/ +#define Rand_seed_t $randseedtype /**/ +#define seedDrand01(x) $seedfunc((Rand_seed_t)x) /**/ +#define RANDBITS $randbits /**/ + +/* SSize_t: + * This symbol holds the type used by functions that return + * a count of bytes or an error condition. It must be a signed type. + * It is usually ssize_t, but may be long or int, etc. + * It may be necessary to include or + * to get any typedef'ed information. + * We will pick a type such that sizeof(SSize_t) == sizeof(Size_t). + */ +#define SSize_t $ssizetype /* signed count of bytes */ + +/* EBCDIC: + * This symbol, if defined, indicates that this system uses + * EBCDIC encoding. + */ +#$ebcdic EBCDIC /**/ + +/* OSNAME: + * This symbol contains the name of the operating system, as determined + * by Configure. You shouldn't rely on it too much; the specific + * feature tests from Configure are generally more reliable. + */ +#define OSNAME "$osname" /**/ + +/* CAT2: + * This macro catenates 2 tokens together. + */ +/* STRINGIFY: + * This macro surrounds its token with double quotes. + */ +#if $cpp_stuff == 1 +#define CAT2(a,b)a/**/b +#define STRINGIFY(a)"a" + /* If you can get stringification with catify, tell me how! */ +#endif +#if $cpp_stuff == 42 +#define CAT2(a,b)a ## b +#define StGiFy(a)# a +#define STRINGIFY(a)StGiFy(a) +#endif +#if $cpp_stuff != 1 && $cpp_stuff != 42 +#include "Bletch: How does this C preprocessor catenate tokens?" +#endif + +/* CPPSTDIN: + * This symbol contains the first part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. Typical value of "cc -E" or "/lib/cpp", but it can also + * call a wrapper. See CPPRUN. + */ +/* CPPMINUS: + * This symbol contains the second part of the string which will invoke + * the C preprocessor on the standard input and produce to standard + * output. This symbol will have the value "-" if CPPSTDIN needs a minus + * to specify standard input, otherwise the value is "". + */ +/* CPPRUN: + * This symbol contains the string which will invoke a C preprocessor on + * the standard input and produce to standard output. It needs to end + * with CPPLAST, after all other preprocessor flags have been specified. + * The main difference with CPPSTDIN is that this program will never be a + * pointer to a shell wrapper, i.e. it will be empty if no preprocessor is + * available directly to the user. Note that it may well be different from + * the preprocessor used to compile the C program. + */ +#define CPPSTDIN "$cppstdin" +#define CPPMINUS "$cppminus" +#define CPPRUN "$cpprun" + +/* HAS_ACCESS: + * This manifest constant lets the C program know that the access() + * system call is available to check for accessibility using real UID/GID. + * (always present on UNIX.) + */ +#$d_access HAS_ACCESS /**/ + +/* HAS_CSH: + * This symbol, if defined, indicates that the C-shell exists. + */ +/* CSH: + * This symbol, if defined, contains the full pathname of csh. + */ +#$d_csh HAS_CSH /**/ +#ifdef HAS_CSH +#define CSH "$full_csh" /**/ +#endif + +/* HAS_ENDGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the group database. + */ +#$d_endgrent HAS_ENDGRENT /**/ + +/* HAS_ENDHOSTENT: + * This symbol, if defined, indicates that the endhostent() routine is + * available to close whatever was being used for host queries. + */ +#$d_endhent HAS_ENDHOSTENT /**/ + +/* HAS_ENDNETENT: + * This symbol, if defined, indicates that the endnetent() routine is + * available to close whatever was being used for network queries. + */ +#$d_endnent HAS_ENDNETENT /**/ + +/* HAS_ENDPROTOENT: + * This symbol, if defined, indicates that the endprotoent() routine is + * available to close whatever was being used for protocol queries. + */ +#$d_endpent HAS_ENDPROTOENT /**/ + +/* HAS_ENDPWENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for finalizing sequential access of the passwd database. + */ +#$d_endpwent HAS_ENDPWENT /**/ + +/* HAS_ENDSERVENT: + * This symbol, if defined, indicates that the endservent() routine is + * available to close whatever was being used for service queries. + */ +#$d_endsent HAS_ENDSERVENT /**/ + +/* HAS_GETGRENT: + * This symbol, if defined, indicates that the getgrent routine is + * available for sequential access of the group database. + */ +#$d_getgrent HAS_GETGRENT /**/ + +/* HAS_GETHOSTBYADDR: + * This symbol, if defined, indicates that the gethostbyaddr() routine is + * available to look up hosts by their IP addresses. + */ +#$d_gethbyaddr HAS_GETHOSTBYADDR /**/ + +/* HAS_GETHOSTBYNAME: + * This symbol, if defined, indicates that the gethostbyname() routine is + * available to look up host names in some data base or other. + */ +#$d_gethbyname HAS_GETHOSTBYNAME /**/ + +/* HAS_GETHOSTENT: + * This symbol, if defined, indicates that the gethostent() routine is + * available to look up host names in some data base or another. + */ +#$d_gethent HAS_GETHOSTENT /**/ + +/* HAS_GETHOSTNAME: + * This symbol, if defined, indicates that the C program may use the + * gethostname() routine to derive the host name. See also HAS_UNAME + * and PHOSTNAME. + */ +/* HAS_UNAME: + * This symbol, if defined, indicates that the C program may use the + * uname() routine to derive the host name. See also HAS_GETHOSTNAME + * and PHOSTNAME. + */ +/* PHOSTNAME: + * This symbol, if defined, indicates the command to feed to the + * popen() routine to derive the host name. See also HAS_GETHOSTNAME + * and HAS_UNAME. Note that the command uses a fully qualified path, + * so that it is safe even if used by a process with super-user + * privileges. + */ +#$d_gethname HAS_GETHOSTNAME /**/ +#$d_uname HAS_UNAME /**/ +#$d_phostname HAS_PHOSTNAME +#ifdef HAS_PHOSTNAME +#define PHOSTNAME "$aphostname" /* How to get the host name */ +#endif + +/* HAS_GETNETBYADDR: + * This symbol, if defined, indicates that the getnetbyaddr() routine is + * available to look up networks by their IP addresses. + */ +#$d_getnbyaddr HAS_GETNETBYADDR /**/ + +/* HAS_GETNETBYNAME: + * This symbol, if defined, indicates that the getnetbyname() routine is + * available to look up networks by their names. + */ +#$d_getnbyname HAS_GETNETBYNAME /**/ + +/* HAS_GETNETENT: + * This symbol, if defined, indicates that the getnetent() routine is + * available to look up network names in some data base or another. + */ +#$d_getnent HAS_GETNETENT /**/ + +/* HAS_GETPROTOENT: + * This symbol, if defined, indicates that the getprotoent() routine is + * available to look up protocols in some data base or another. + */ +#$d_getpent HAS_GETPROTOENT /**/ + +/* HAS_GETPROTOBYNAME: + * This symbol, if defined, indicates that the getprotobyname() + * routine is available to look up protocols by their name. + */ +/* HAS_GETPROTOBYNUMBER: + * This symbol, if defined, indicates that the getprotobynumber() + * routine is available to look up protocols by their number. + */ +#$d_getpbyname HAS_GETPROTOBYNAME /**/ +#$d_getpbynumber HAS_GETPROTOBYNUMBER /**/ + +/* HAS_GETPWENT: + * This symbol, if defined, indicates that the getpwent routine is + * available for sequential access of the passwd database. + * If this is not available, the older getpw() function may be available. + */ +#$d_getpwent HAS_GETPWENT /**/ + +/* HAS_GETSERVENT: + * This symbol, if defined, indicates that the getservent() routine is + * available to look up network services in some data base or another. + */ +#$d_getsent HAS_GETSERVENT /**/ + +/* HAS_GETSERVBYNAME: + * This symbol, if defined, indicates that the getservbyname() + * routine is available to look up services by their name. + */ +/* HAS_GETSERVBYPORT: + * This symbol, if defined, indicates that the getservbyport() + * routine is available to look up services by their port. + */ +#$d_getsbyname HAS_GETSERVBYNAME /**/ +#$d_getsbyport HAS_GETSERVBYPORT /**/ + +/* HAS_HTONL: + * This symbol, if defined, indicates that the htonl() routine (and + * friends htons() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_HTONS: + * This symbol, if defined, indicates that the htons() routine (and + * friends htonl() ntohl() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHL: + * This symbol, if defined, indicates that the ntohl() routine (and + * friends htonl() htons() ntohs()) are available to do network + * order byte swapping. + */ +/* HAS_NTOHS: + * This symbol, if defined, indicates that the ntohs() routine (and + * friends htonl() htons() ntohl()) are available to do network + * order byte swapping. + */ +#$d_htonl HAS_HTONL /**/ +#$d_htonl HAS_HTONS /**/ +#$d_htonl HAS_NTOHL /**/ +#$d_htonl HAS_NTOHS /**/ + +/* HAS_LONG_DOUBLE: + * This symbol will be defined if the C compiler supports long + * doubles. + */ +/* LONG_DOUBLESIZE: + * This symbol contains the size of a long double, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long doubles. + */ +#$d_longdbl HAS_LONG_DOUBLE /**/ +#ifdef HAS_LONG_DOUBLE +#define LONG_DOUBLESIZE $longdblsize /**/ +#endif + +/* HAS_LONG_LONG: + * This symbol will be defined if the C compiler supports long long. + */ +/* LONGLONGSIZE: + * This symbol contains the size of a long long, so that the + * C preprocessor can make decisions based on it. It is only + * defined if the system supports long long. + */ +#$d_longlong HAS_LONG_LONG /**/ +#ifdef HAS_LONG_LONG +#define LONGLONGSIZE $longlongsize /**/ +#endif + +/* HAS_MEMCHR: + * This symbol, if defined, indicates that the memchr routine is available + * to locate characters within a C string. + */ +#$d_memchr HAS_MEMCHR /**/ + +/* HAS_MMAP: + * This symbol, if defined, indicates that the mmap system call is + * available to map a file into memory. + */ +/* Mmap_t: + * This symbol holds the return type of the mmap() system call + * (and simultaneously the type of the first argument). + * Usually set to 'void *' or 'cadd_t'. + */ +#$d_mmap HAS_MMAP /**/ +#define Mmap_t $mmaptype /**/ + +/* HAS_MSG: + * This symbol, if defined, indicates that the entire msg*(2) library is + * supported (IPC mechanism based on message queues). + */ +#$d_msg HAS_MSG /**/ + +/* HAS_SEM: + * This symbol, if defined, indicates that the entire sem*(2) library is + * supported. + */ +#$d_sem HAS_SEM /**/ + +/* HAS_SETGRENT: + * This symbol, if defined, indicates that the setgrent routine is + * available for initializing sequential access of the group database. + */ +#$d_setgrent HAS_SETGRENT /**/ + +/* HAS_SETGROUPS: + * This symbol, if defined, indicates that the setgroups() routine is + * available to set the list of process groups. If unavailable, multiple + * groups are probably not supported. + */ +#$d_setgrps HAS_SETGROUPS /**/ + +/* HAS_SETHOSTENT: + * This symbol, if defined, indicates that the sethostent() routine is + * available. + */ +#$d_sethent HAS_SETHOSTENT /**/ + +/* HAS_SETNETENT: + * This symbol, if defined, indicates that the setnetent() routine is + * available. + */ +#$d_setnent HAS_SETNETENT /**/ + +/* HAS_SETPROTOENT: + * This symbol, if defined, indicates that the setprotoent() routine is + * available. + */ +#$d_setpent HAS_SETPROTOENT /**/ + +/* HAS_SETPWENT: + * This symbol, if defined, indicates that the setpwent routine is + * available for initializing sequential access of the passwd database. + */ +#$d_setpwent HAS_SETPWENT /**/ + +/* HAS_SETSERVENT: + * This symbol, if defined, indicates that the setservent() routine is + * available. + */ +#$d_setsent HAS_SETSERVENT /**/ + +/* HAS_SETVBUF: + * This symbol, if defined, indicates that the setvbuf routine is + * available to change buffering on an open stdio stream. + * to a line-buffered mode. + */ +#$d_setvbuf HAS_SETVBUF /**/ + +/* HAS_SHM: + * This symbol, if defined, indicates that the entire shm*(2) library is + * supported. + */ +#$d_shm HAS_SHM /**/ + +/* HAS_SOCKET: + * This symbol, if defined, indicates that the BSD socket interface is + * supported. + */ +/* HAS_SOCKETPAIR: + * This symbol, if defined, indicates that the BSD socketpair() call is + * supported. + */ +/* HAS_MSG_CTRUNC: + * This symbol, if defined, indicates that the MSG_CTRUNC is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_DONTROUTE: + * This symbol, if defined, indicates that the MSG_DONTROUTE is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_OOB: + * This symbol, if defined, indicates that the MSG_OOB is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PEEK: + * This symbol, if defined, indicates that the MSG_PEEK is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_MSG_PROXY: + * This symbol, if defined, indicates that the MSG_PROXY is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SCM_RIGHTS: + * This symbol, if defined, indicates that the SCM_RIGHTS is supported. + * Checking just with #ifdef might not be enough because this symbol + * has been known to be an enum. + */ +/* HAS_SENDMSG: + * This symbol, if defined, indicates that the sendmsg is supported + * to send messages between sockets. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_RECVMSG: + * This symbol, if defined, indicates that the recvmsg is supported + * to send messages between sockets. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_STRUCT_MSGHDR: + * This symbol, if defined, indicates that the struct msghdr + * (BSD 4.3 or 4.4) is supported. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +/* HAS_STRUCT_CMSGHDR: + * This symbol, if defined, indicates that the struct cmsghdr + * (BSD 4.4) is supported. You will also need struct + * iovec from , HAS_STRUCT_IOVEC and I_SYSUIO. + */ +#$d_socket HAS_SOCKET /**/ +#$d_sockpair HAS_SOCKETPAIR /**/ +#$d_msg_ctrunc HAS_MSG_CTRUNC /**/ +#$d_msg_dontroute HAS_MSG_DONTROUTE /**/ +#$d_msg_oob HAS_MSG_OOB /**/ +#$d_msg_peek HAS_MSG_PEEK /**/ +#$d_msg_proxy HAS_MSG_PROXY /**/ +#$d_scm_rights HAS_SCM_RIGHTS /**/ +#$d_sendmsg HAS_SENDMSG /**/ +#$d_recvmsg HAS_RECVMSG /**/ +#$d_msghdr_s HAS_STRUCT_MSGHDR /**/ +#$d_cmsghdr_s HAS_STRUCT_CMSGHDR /**/ + +/* USE_STAT_BLOCKS: + * This symbol is defined if this system has a stat structure declaring + * st_blksize and st_blocks. + */ +#$d_statblks USE_STAT_BLOCKS /**/ + +/* HAS_STRERROR: + * This symbol, if defined, indicates that the strerror routine is + * available to translate error numbers to strings. See the writeup + * of Strerror() in this file before you try to define your own. + */ +/* HAS_SYS_ERRLIST: + * This symbol, if defined, indicates that the sys_errlist array is + * available to translate error numbers to strings. The extern int + * sys_nerr gives the size of that table. + */ +/* Strerror: + * This preprocessor symbol is defined as a macro if strerror() is + * not available to translate error numbers to strings but sys_errlist[] + * array is there. + */ +#$d_strerror HAS_STRERROR /**/ +#$d_syserrlst HAS_SYS_ERRLIST /**/ +#define Strerror(e) $d_strerrm + +/* HAS_UNION_SEMUN: + * This symbol, if defined, indicates that the union semun is + * defined by including . If not, the user code + * probably needs to define it as: + * union semun { + * int val; + * struct semid_ds *buf; + * unsigned short *array; + * } + */ +/* USE_SEMCTL_SEMUN: + * This symbol, if defined, indicates that union semun is + * used for semctl IPC_STAT. + */ +/* USE_SEMCTL_SEMID_DS: + * This symbol, if defined, indicates that struct semid_ds * is + * used for semctl IPC_STAT. + */ +#$d_union_semun HAS_UNION_SEMUN /**/ +#$d_semctl_semun USE_SEMCTL_SEMUN /**/ +#$d_semctl_semid_ds USE_SEMCTL_SEMID_DS /**/ + +/* HAS_VFORK: + * This symbol, if defined, indicates that vfork() exists. + */ +#$d_vfork HAS_VFORK /**/ + +/* Signal_t: + * This symbol's value is either "void" or "int", corresponding to the + * appropriate return type of a signal handler. Thus, you can declare + * a signal handler using "Signal_t (*handler)()", and define the + * handler using "Signal_t handler(sig)". + */ +#define Signal_t $signal_t /* Signal handler's return type */ + +/* Groups_t: + * This symbol holds the type used for the second argument to + * getgroups() and setgropus(). Usually, this is the same as + * gidtype (gid_t) , but sometimes it isn't. + * It can be int, ushort, uid_t, etc... + * It may be necessary to include to get any + * typedef'ed information. This is only required if you have + * getgroups() or setgropus().. + */ +#if defined(HAS_GETGROUPS) || defined(HAS_SETGROUPS) +#define Groups_t $groupstype /* Type for 2nd arg to [sg]etgroups() */ +#endif + +/* I_GRP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* GRPASSWD: + * This symbol, if defined, indicates to the C program that struct group + * in contains gr_passwd. + */ +#$i_grp I_GRP /**/ +#$d_grpasswd GRPASSWD /**/ + +/* I_NETDB: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_netdb I_NETDB /**/ + +/* I_PWD: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* PWQUOTA: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_quota. + */ +/* PWAGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_age. + */ +/* PWCHANGE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_change. + */ +/* PWCLASS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_class. + */ +/* PWEXPIRE: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_expire. + */ +/* PWCOMMENT: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_comment. + */ +/* PWGECOS: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_gecos. + */ +/* PWPASSWD: + * This symbol, if defined, indicates to the C program that struct passwd + * contains pw_passwd. + */ +#$i_pwd I_PWD /**/ +#$d_pwquota PWQUOTA /**/ +#$d_pwage PWAGE /**/ +#$d_pwchange PWCHANGE /**/ +#$d_pwclass PWCLASS /**/ +#$d_pwexpire PWEXPIRE /**/ +#$d_pwcomment PWCOMMENT /**/ +#$d_pwgecos PWGECOS /**/ +#$d_pwpasswd PWPASSWD /**/ + +/* I_SYSUIO: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysuio I_SYSUIO /**/ + +/* Free_t: + * This variable contains the return type of free(). It is usually + * void, but occasionally int. + */ +/* Malloc_t: + * This symbol is the type of pointer returned by malloc and realloc. + */ +#define Malloc_t $malloctype /**/ +#define Free_t $freetype /**/ + +/* MYMALLOC: + * This symbol, if defined, indicates that we're using our own malloc. + */ +#$d_mymalloc MYMALLOC /**/ + +/* SIG_NAME: + * This symbol contains a list of signal names in order of + * signal number. This is intended + * to be used as a static array initialization, like this: + * char *sig_name[] = { SIG_NAME }; + * The signals in the list are separated with commas, and each signal + * is surrounded by double quotes. There is no leading SIG in the signal + * name, i.e. SIGQUIT is known as "QUIT". + * Gaps in the signal numbers (up to NSIG) are filled in with NUMnn, + * etc., where nn is the actual signal number (e.g. NUM37). + * The signal number for sig_name[i] is stored in sig_num[i]. + * The last element is 0 to terminate the list with a NULL. This + * corresponds to the 0 at the end of the sig_num list. + */ +/* SIG_NUM: + * This symbol contains a list of signal numbers, in the same order as the + * SIG_NAME list. It is suitable for static array initialization, as in: + * int sig_num[] = { SIG_NUM }; + * The signals in the list are separated with commas, and the indices + * within that list and the SIG_NAME list match, so it's easy to compute + * the signal name from a number or vice versa at the price of a small + * dynamic linear lookup. + * Duplicates are allowed, but are moved to the end of the list. + * The signal number corresponding to sig_name[i] is sig_number[i]. + * if (i < NSIG) then sig_number[i] == i. + * The last element is 0, corresponding to the 0 at the end of + * the sig_name list. + */ +#define SIG_NAME $sig_name_init /**/ +#define SIG_NUM $sig_num_init /**/ + +/* VOIDFLAGS: + * This symbol indicates how much support of the void type is given by this + * compiler. What various bits mean: + * + * 1 = supports declaration of void + * 2 = supports arrays of pointers to functions returning void + * 4 = supports comparisons between pointers to void functions and + * addresses of void functions + * 8 = suports declaration of generic void pointers + * + * The package designer should define VOIDUSED to indicate the requirements + * of the package. This can be done either by #defining VOIDUSED before + * including config.h, or by defining defvoidused in Myinit.U. If the + * latter approach is taken, only those flags will be tested. If the + * level of void support necessary is not present, defines void to int. + */ +#ifndef VOIDUSED +#define VOIDUSED $defvoidused +#endif +#define VOIDFLAGS $voidflags +#if (VOIDFLAGS & VOIDUSED) != VOIDUSED +#define void int /* is void to be avoided? */ +#define M_VOID /* Xenix strikes again */ +#endif + +/* ARCHLIB: + * This variable, if defined, holds the name of the directory in + * which the user wants to put architecture-dependent public + * library files for $package. It is most often a local directory + * such as /usr/local/lib. Programs using this variable must be + * prepared to deal with filename expansion. If ARCHLIB is the + * same as PRIVLIB, it is not defined, since presumably the + * program already searches PRIVLIB. + */ +/* ARCHLIB_EXP: + * This symbol contains the ~name expanded version of ARCHLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#$d_archlib ARCHLIB "$archlib" /**/ +#$d_archlib ARCHLIB_EXP "$archlibexp" /**/ + +/* DLSYM_NEEDS_UNDERSCORE: + * This symbol, if defined, indicates that we need to prepend an + * underscore to the symbol name before calling dlsym(). This only + * makes sense if you *have* dlsym, which we will presume is the + * case if you're using dl_dlopen.xs. + */ +#$d_dlsymun DLSYM_NEEDS_UNDERSCORE /**/ + +/* HAS_ENDSPENT: + * This symbol, if defined, indicates that the endspent system call is + * available to finalize the scan of SysV shadow password entries. + */ +#$d_endspent HAS_ENDSPENT /**/ + +/* HAS_FSEEKO: + * This symbol, if defined, indicates that the fseeko routine is + * available to fseek beyond 32 bits (useful for ILP32 hosts). + */ +#$d_fseeko HAS_FSEEKO /**/ + +/* HAS_FTELLO: + * This symbol, if defined, indicates that the ftello routine is + * available to ftell from beyond 32 bits (useful for ILP32 hosts). + */ +#$d_ftello HAS_FTELLO /**/ + +/* HAS_GETMNTENT: + * This symbol, if defined, indicates that the getmntent routine is + * available to iterate through mounted file systems. + */ +#$d_getmntent HAS_GETMNTENT /**/ + +/* HAS_GETSPENT: + * This symbol, if defined, indicates that the getspent system call is + * available to retrieve SysV shadow password entries sequentially. + */ +#$d_getspent HAS_GETSPENT /**/ + +/* HAS_GETSPNAM: + * This symbol, if defined, indicates that the getspnam system call is + * available to retrieve SysV shadow password entries by name. + */ +#$d_getspnam HAS_GETSPNAM /**/ + +/* HAS_HASMNTOPT: + * This symbol, if defined, indicates that the hasmntopt routine is + * available to query the mount options of file systems. + */ +#$d_hasmntopt HAS_HASMNTOPT /**/ + +/* HAS_MADVISE: + * This symbol, if defined, indicates that the madvise system call is + * available to map a file into memory. + */ +#$d_madvise HAS_MADVISE /**/ + +/* HAS_MPROTECT: + * This symbol, if defined, indicates that the mprotect system call is + * available to modify the access protection of a memory mapped file. + */ +#$d_mprotect HAS_MPROTECT /**/ + +/* HAS_READV: + * This symbol, if defined, indicates that the readv routine is + * available to do gather reads. You will also need + * and there I_SYSUIO. + */ +#$d_readv HAS_READV /**/ + +/* HAS_SETSPENT: + * This symbol, if defined, indicates that the setspent system call is + * available to initialize the scan of SysV shadow password entries. + */ +#$d_setspent HAS_SETSPENT /**/ + +/* USE_SFIO: + * This symbol, if defined, indicates that sfio should + * be used. + */ +#$d_sfio USE_SFIO /**/ + +/* HAS_FSTATFS: + * This symbol, if defined, indicates that the fstatfs routine is + * available to stat filesystems of file descriptors. + */ +/* HAS_STRUCT_STATFS_FLAGS: + * This symbol, if defined, indicates that the struct statfs + * does have the f_flags member containing the mount flags of + * the filesystem holding the file. + * This kind of struct statfs is coming from sys/mount.h (BSD), + * not from sys/statfs.h (SYSV). + */ +#$d_fstatfs HAS_FSTATFS /**/ +#$d_statfsflags HAS_STRUCT_STATFS_FLAGS /**/ + +/* HAS_FSTATVFS: + * This symbol, if defined, indicates that the fstatvfs routine is + * available to stat filesystems of file descriptors. + */ +#$d_fstatvfs HAS_FSTATVFS /**/ + +/* HAS_TELLDIR_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the telldir() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern long telldir (DIR*); + */ +#$d_telldirproto HAS_TELLDIR_PROTO /**/ + +/* HAS_WRITEV: + * This symbol, if defined, indicates that the writev routine is + * available to do scatter writes. + */ +#$d_writev HAS_WRITEV /**/ + +/* HAS_DBMINIT64: + * This symbol, if defined, indicates that the dbminit64 routine is + * available to open dbm files larger than 2 gigabytes. + */ +/* HAS_DBMCLOSE64: + * This symbol, if defined, indicates that the dbmclose64 routine is + * available to close dbm files larger than 2 gigabytes. + */ +/* HAS_FETCH64: + * This symbol, if defined, indicates that the fetch64 routine is + * available to fetch from dbm files larger than 2 gigabytes. + */ +/* HAS_STORE64: + * This symbol, if defined, indicates that the store64 routine is + * available to store to dbm files larger than 2 gigabytes. + */ +/* HAS_DELETE64: + * This symbol, if defined, indicates that the delete64 routine is + * available to delete from dbm files larger than 2 gigabytes. + */ +/* HAS_FIRSTKEY64: + * This symbol, if defined, indicates that the firstkey64 routine is + * available to firstkey in dbm files larger than 2 gigabytes. + */ +/* HAS_NEXTKEY64: + * This symbol, if defined, indicates that the nextkey64 routine is + * available to nextkey in dbm files larger than 2 gigabytes. + */ +#$d_dbminit64 HAS_DBMINIT64 /**/ +#$d_dbmclose64 HAS_DBMCLOSE64 /**/ +#$d_fetch64 HAS_FETCH64 /**/ +#$d_store64 HAS_STORE64 /**/ +#$d_delete64 HAS_DELETE64 /**/ +#$d_firstkey64 HAS_FIRSTKEY64 /**/ +#$d_nextkey64 HAS_NEXTKEY64 /**/ + +/* USE_DYNAMIC_LOADING: + * This symbol, if defined, indicates that dynamic loading of + * some sort is available. + */ +#$usedl USE_DYNAMIC_LOADING /**/ + +/* FFLUSH_NULL: + * This symbol, if defined, tells that fflush(NULL) does flush + * all pending stdio output. + */ +/* FFLUSH_ALL: + * This symbol, if defined, tells that to flush + * all pending stdio output one must loop through all + * the stdio file handles stored in an array and fflush them. + * Note that if fflushNULL is defined, fflushall will not + * even be probed for and will be left undefined. + */ +#$fflushNULL FFLUSH_NULL /**/ +#$fflushall FFLUSH_ALL /**/ + +/* DB_Prefix_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is u_int32_t. + */ +/* DB_Hash_t: + * This symbol contains the type of the prefix structure element + * in the header file. In older versions of DB, it was + * int, while in newer ones it is size_t. + */ +#define DB_Hash_t $db_hashtype /**/ +#define DB_Prefix_t $db_prefixtype /**/ + +/* I_INTTYPES: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +/* HAS_INT64_T: + * This symbol will defined if the C compiler supports int64_t. + * Usually the needs to be included, but sometimes + * is enough. + */ +#$i_inttypes I_INTTYPES /**/ +#$d_int64t HAS_INT64_T /**/ + +/* I_MNTENT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_mntent I_MNTENT /**/ + +/* I_NETINET_TCP: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_netinettcp I_NETINET_TCP /**/ + +/* I_POLL: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_poll I_POLL /**/ + +/* I_SHADOW: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_shadow I_SHADOW /**/ + +/* I_SYS_MMAN: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysmman I_SYS_MMAN /**/ + +/* I_SYS_MOUNT: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysmount I_SYS_MOUNT /**/ + +/* I_SYS_STATVFS: + * This symbol, if defined, indicates that exists and + * should be included. + */ +#$i_sysstatvfs I_SYS_STATVFS /**/ + +/* INSTALL_USR_BIN_PERL: + * This symbol, if defined, indicates that Perl is to be installed + * also as /usr/bin/perl. + */ +#$installusrbinperl INSTALL_USR_BIN_PERL /**/ + +/* HAS_FSTAT64: + * This symbol, if defined, indicates that the fstat64 routine is + * available to stat files (fds) larger than 2 gigabytes. + */ +/* HAS_FTRUNCATE64: + * This symbol, if defined, indicates that the ftruncate64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_LSEEK64: + * This symbol, if defined, indicates that the lseek64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_LSTAT64: + * This symbol, if defined, indicates that the lstat64 routine is + * available to stat files (symlinks) larger than 2 gigabytes. + */ +/* HAS_OPEN64: + * This symbol, if defined, indicates that the open64 routine is + * available to open files larger than 2 gigabytes. + */ +/* HAS_OPENDIR64: + * This symbol, if defined, indicates that the opendir64 routine is + * available to opendir files larger than 2 gigabytes. + */ +/* HAS_READDIR64: + * This symbol, if defined, indicates that the readdir64 routine is + * available to readdir files larger than 2 gigabytes. + */ +/* HAS_SEEKDIR64: + * This symbol, if defined, indicates that the seekdir64 routine is + * available to seekdir files larger than 2 gigabytes. + */ +/* HAS_STAT64: + * This symbol, if defined, indicates that the stat64 routine is + * available to stat files larger than 2 gigabytes. + */ +/* HAS_TELLDIR64: + * This symbol, if defined, indicates that the telldir64 routine is + * available to telldir files larger than 2 gigabytes. + */ +/* HAS_TRUNCATE64: + * This symbol, if defined, indicates that the truncate64 routine is + * available to truncate files larger than 2 gigabytes. + */ +/* HAS_OFF64_T: + * This symbol will be defined if the C compiler supports off64_t. + */ +/* HAS_STRUCT_DIRENT64: + * This symbol will be defined if the C compiler supports struct dirent64. + */ +#$d_fstat64 HAS_FSTAT64 /**/ +#$d_ftruncate64 HAS_FTRUNCATE64 /**/ +#$d_lseek64 HAS_LSEEK64 /**/ +#$d_lstat64 HAS_LSTAT64 /**/ +#$d_open64 HAS_OPEN64 /**/ +#$d_opendir64 HAS_OPENDIR64 /**/ +#$d_readdir64 HAS_READDIR64 /**/ +#$d_seekdir64 HAS_SEEKDIR64 /**/ +#$d_stat64 HAS_STAT64 /**/ +#$d_telldir64 HAS_TELLDIR64 /**/ +#$d_truncate64 HAS_TRUNCATE64 /**/ +#$d_off64_t HAS_OFF64_T /**/ +#$d_dirent64_s HAS_STRUCT_DIRENT64 /**/ + +/* PRIVLIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + */ +/* PRIVLIB_EXP: + * This symbol contains the ~name expanded version of PRIVLIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define PRIVLIB "$privlib" /**/ +#define PRIVLIB_EXP "$privlibexp" /**/ + +/* SELECT_MIN_BITS: + * This symbol holds the minimum number of bits operated by select. + * That is, if you do select(n, ...), how many bits at least will be + * cleared in the masks if some activity is detected. Usually this + * is either n or 32*ceil(n/32), especially many little-endians do + * the latter. This is only useful if you have select(), naturally. + */ +#define SELECT_MIN_BITS $selectminbits /**/ + +/* SITEARCH: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ +/* SITEARCH_EXP: + * This symbol contains the ~name expanded version of SITEARCH, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITEARCH "$sitearch" /**/ +#define SITEARCH_EXP "$sitearchexp" /**/ + +/* SITELIB: + * This symbol contains the name of the private library for this package. + * The library is private in the sense that it needn't be in anyone's + * execution path, but it should be accessible by the world. The program + * should be prepared to do ~ expansion. + * The standard distribution will put nothing in this directory. + * Individual sites may place their own extensions and modules in + * this directory. + */ +/* SITELIB_EXP: + * This symbol contains the ~name expanded version of SITELIB, to be used + * in programs that are not prepared to deal with ~ expansion at run-time. + */ +#define SITELIB "$sitelib" /**/ +#define SITELIB_EXP "$sitelibexp" /**/ + +/* STARTPERL: + * This variable contains the string to put in front of a perl + * script to make sure (one hopes) that it runs with perl and not + * some shell. + */ +#define STARTPERL "$startperl" /**/ + +/* HAS_FGETPOS64: + * This symbol, if defined, indicates that the fgetpos64 routine is + * available to getpos files larger than 2 gigabytes. + */ +/* HAS_FOPEN64: + * This symbol, if defined, indicates that the fopen64 routine is + * available to open files larger than 2 gigabytes. + */ +/* HAS_FREOPEN64: + * This symbol, if defined, indicates that the freopen64 routine is + * available to reopen files larger than 2 gigabytes. + */ +/* HAS_FSEEK64: + * This symbol, if defined, indicates that the fseek64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_FSEEKO64: + * This symbol, if defined, indicates that the fseeko64 routine is + * available to seek files larger than 2 gigabytes. + */ +/* HAS_FSETPOS64: + * This symbol, if defined, indicates that the fsetpos64 routine is + * available to setpos files larger than 2 gigabytes. + */ +/* HAS_FTELL64: + * This symbol, if defined, indicates that the ftell64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_FTELLO64: + * This symbol, if defined, indicates that the ftello64 routine is + * available to tell files larger than 2 gigabytes. + */ +/* HAS_TMPFILE64: + * This symbol, if defined, indicates that the tmpfile64 routine is + * available to tmpfile files larger than 2 gigabytes. + */ +#$d_fgetpos64 HAS_FGETPOS64 /**/ +#$d_fopen64 HAS_FOPEN64 /**/ +#$d_freopen64 HAS_FREOPEN64 /**/ +#$d_fseek64 HAS_FSEEK64 /**/ +#$d_fseeko64 HAS_FSEEKO64 /**/ +#$d_fsetpos64 HAS_FSETPOS64 /**/ +#$d_ftell64 HAS_FTELL64 /**/ +#$d_ftello64 HAS_FTELLO64 /**/ +#$d_tmpfile64 HAS_TMPFILE64 /**/ + +/* HAS_STDIO_STREAM_ARRAY: + * This symbol, if defined, tells that there is an array + * holding the stdio streams. + */ +/* STDIO_STREAM_ARRAY: + * This symbol tells the name of the array holding the stdio streams. + * Usual values include _iob, __iob, and __sF. + */ +#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY /**/ +#define STDIO_STREAM_ARRAY $stdio_stream_array + +/* USE_64_BITS: + * This symbol, if defined, indicates that 64-bit interfaces should + * be used when available. If not defined, the native default interfaces + * will be used (be they 32 or 64 bits). + */ +#$use64bits USE_64_BITS /**/ + +/* MULTIPLICITY: + * This symbol, if defined, indicates that Perl should + * be built to use multiplicity. + */ +#$usemultiplicity MULTIPLICITY /**/ + +/* USE_PERLIO: + * This symbol, if defined, indicates that the PerlIO abstraction should + * be used throughout. If not defined, stdio should be + * used in a fully backward compatible manner. + */ +#$useperlio USE_PERLIO /**/ + +/* HAS_DRAND48_PROTO: + * This symbol, if defined, indicates that the system provides + * a prototype for the drand48() function. Otherwise, it is up + * to the program to supply one. A good guess is + * extern double drand48 (void); + */ +#$d_drand48proto HAS_DRAND48_PROTO /**/ + +/* HAS_GETHOST_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for gethostent(), gethostbyname(), and + * gethostbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_gethostprotos HAS_GETHOST_PROTOS /**/ + +/* HAS_GETNET_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getnetent(), getnetbyname(), and + * getnetbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getnetprotos HAS_GETNET_PROTOS /**/ + +/* HAS_GETPROTO_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getprotoent(), getprotobyname(), and + * getprotobyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getprotoprotos HAS_GETPROTO_PROTOS /**/ + +/* HAS_GETSERV_PROTOS: + * This symbol, if defined, indicates that includes + * prototypes for getservent(), getservbyname(), and + * getservbyaddr(). Otherwise, it is up to the program to guess + * them. See netdbtype.U for probing for various Netdb_xxx_t types. + */ +#$d_getservprotos HAS_GETSERV_PROTOS /**/ + +/* Netdb_host_t: + * This symbol holds the type used for the 1st argument + * to gethostbyaddr(). + */ +/* Netdb_hlen_t: + * This symbol holds the type used for the 2nd argument + * to gethostbyaddr(). + */ +/* Netdb_name_t: + * This symbol holds the type used for the argument to + * gethostbyname(). + */ +/* Netdb_net_t: + * This symbol holds the type used for the 1st argument to + * getnetbyaddr(). + */ +#define Netdb_host_t $netdb_host_type /**/ +#define Netdb_hlen_t $netdb_hlen_type /**/ +#define Netdb_name_t $netdb_name_type /**/ +#define Netdb_net_t $netdb_net_type /**/ + +/* Select_fd_set_t: + * This symbol holds the type used for the 2nd, 3rd, and 4th + * arguments to select. Usually, this is 'fd_set *', if HAS_FD_SET + * is defined, and 'int *' otherwise. This is only useful if you + * have select(), of course. + */ +#define Select_fd_set_t $selecttype /**/ + +/* ARCHNAME: + * This symbol holds a string representing the architecture name. + * It may be used to construct an architecture-dependant pathname + * where library files may be held under a private library, for + * instance. + */ +#define ARCHNAME "$archname" /**/ + +/* OLD_PTHREAD_CREATE_JOINABLE: + * This symbol, if defined, indicates how to create pthread + * in joinable (aka undetached) state. NOTE: not defined + * if pthread.h already has defined PTHREAD_CREATE_JOINABLE + * (the new version of the constant). + * If defined, known values are PTHREAD_CREATE_UNDETACHED + * and __UNDETACHED. + */ +#$d_old_pthread_create_joinable OLD_PTHREAD_CREATE_JOINABLE $old_pthread_create_joinable /**/ + +/* HAS_PTHREAD_YIELD: + * This symbol, if defined, indicates that the pthread_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +/* SCHED_YIELD: + * This symbol defines the way to yield the execution of + * the current thread. Known ways are sched_yield, + * pthread_yield, and pthread_yield with NULL. + */ +/* HAS_SCHED_YIELD: + * This symbol, if defined, indicates that the sched_yield + * routine is available to yield the execution of the current + * thread. sched_yield is preferable to pthread_yield. + */ +#$d_pthread_yield HAS_PTHREAD_YIELD /**/ +#define SCHED_YIELD $sched_yield /**/ +#$d_sched_yield HAS_SCHED_YIELD /**/ + +/* I_MACH_CTHREADS: + * This symbol, if defined, indicates to the C program that it should + * include . + */ +#$i_machcthr I_MACH_CTHREADS /**/ + +/* USE_THREADS: + * This symbol, if defined, indicates that Perl should + * be built to use threads. + */ +/* OLD_PTHREADS_API: + * This symbol, if defined, indicates that Perl should + * be built to use the old draft POSIX threads API. + */ +#$usethreads USE_THREADS /**/ +#$d_oldpthreads OLD_PTHREADS_API /**/ + +/* Time_t: + * This symbol holds the type returned by time(). It can be long, + * or time_t on BSD sites (in which case should be + * included). + */ +#define Time_t $timetype /* Time type */ + +/* HAS_TIMES: + * This symbol, if defined, indicates that the times() routine exists. + * Note that this became obsolete on some systems (SUNOS), which now + * use getrusage(). It may be necessary to include . + */ +#$d_times HAS_TIMES /**/ + +/* Fpos_t: + * This symbol holds the type used to declare file positions in libc. + * It can be fpos_t, long, uint, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Fpos_t $fpostype /* File position type */ + +/* Gid_t: + * This symbol holds the return type of getgid() and the type of + * argument to setrgid() and related functions. Typically, + * it is the type of group ids in the kernel. It can be int, ushort, + * uid_t, etc... It may be necessary to include to get + * any typedef'ed information. + */ +#define Gid_t $gidtype /* Type for getgid(), etc... */ + +/* Off_t: + * This symbol holds the type used to declare offsets in the kernel. + * It can be int, long, off_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +/* LSEEKSIZE: + * This symbol holds the number of bytes used by the Off_t. + */ +#define Off_t $lseektype /* type */ +#define LSEEKSIZE $lseeksize /* size */ + +/* Mode_t: + * This symbol holds the type used to declare file modes + * for systems calls. It is usually mode_t, but may be + * int or unsigned short. It may be necessary to include + * to get any typedef'ed information. + */ +#define Mode_t $modetype /* file mode parameter for system calls */ + +/* Pid_t: + * This symbol holds the type used to declare process ids in the kernel. + * It can be int, uint, pid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Pid_t $pidtype /* PID type */ + +/* Size_t: + * This symbol holds the type used to declare length parameters + * for string functions. It is usually size_t, but may be + * unsigned long, int, etc. It may be necessary to include + * to get any typedef'ed information. + */ +#define Size_t $sizetype /* length paramater for string functions */ + +/* Uid_t: + * This symbol holds the type used to declare user ids in the kernel. + * It can be int, ushort, uid_t, etc... It may be necessary to include + * to get any typedef'ed information. + */ +#define Uid_t $uidtype /* UID type */ #endif !GROK!THIS!