X-Git-Url: https://perl5.git.perl.org/perl5.git/blobdiff_plain/1475152f1741f07dd9b54406ebac0872695b59b7..7ea75b6170327bc14c03f69e90eb8c7d3cb91382:/Makefile.SH

diff --git a/Makefile.SH b/Makefile.SH
index 80bcc34..8184f87 100644
--- a/Makefile.SH
+++ b/Makefile.SH
@@ -9,6 +9,21 @@ case $PERL_CONFIG_SH in
 	. $TOP/config.sh
 	;;
 esac
+
+# H.Merijn Brand [17 Feb 2004]
+# This comment is just to ensure that Configure will find variables that
+# are removed/replaced in patches on blead, but are still needed in the
+# 5.8.x, 5.6.x and 5.005.x maintainance tracks.
+# metaconfig -m will scan all .SH files on this level (not deeper), and
+# not in x2p and other subfolders. This file is as good as any .SH
+# patch   references
+# #22227 $baserev
+# #22302 $yacc $byacc
+
+# H.Merijn Brand [30 Oct 2004]
+# Mentioned for the same reason for future reference
+# #23434 $d_strlcat $d_strlcpy
+
 : This forces SH files to create target in same directory as SH file.
 : This is so that make depend always knows where to find SH derivatives.
 case "$0" in
@@ -36,6 +51,7 @@ true)
 	esac
 
 	pldlflags="$cccdlflags"
+	static_target='static_pic'
 	case "${osname}${osvers}" in
 	next4*)
 		ld=libtool
@@ -45,9 +61,10 @@ true)
 		;;
 	rhapsody*|darwin*)
 		shrpldflags="${ldflags} -dynamiclib \
-			     -compatibility_version 1 \
+                            -compatibility_version \
+				${api_revision}.${api_version}.${api_subversion} \
 			     -current_version \
-				${api_version}.${api_subversion} \
+				${revision}.${patchlevel}.${subversion} \
 			     -install_name \$(shrpdir)/\$@"
 		;;
 	cygwin*)
@@ -59,6 +76,10 @@ true)
 	netbsd*|freebsd[234]*|openbsd*)
 		linklibperl="-L. -lperl"
 		;;
+	interix*)
+		linklibperl="-L. -lperl"
+		shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
+		;;
 	aix*)
 		shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
 		case "$osvers" in
@@ -94,8 +115,41 @@ true)
 	    ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
 	    ;;
         esac
+
+	case "$ldlibpth" in
+	# Protect any spaces
+	*" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
+	esac
+
+	case "$osname" in
+	linux)
+	    # If there is a pre-existing $libperl from a previous
+	    # installation, Linux needs to use LD_PRELOAD to
+	    # override the LD_LIBRARY_PATH setting.  See the
+	    # INSTALL file, under "Building a shared perl library".
+	    # If there is no pre-existing $libperl, we don't need
+	    # to do anything further.
+	    if test -f $archlib/CORE/$libperl; then
+		rm -f preload
+		cat <<'EOT' > preload
+#! /bin/sh
+lib=$1
+shift
+test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
+exec "$@"
+EOT
+		chmod 755 preload
+		ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
+	    fi
+	    ;;
+	os390)	test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
+		;;
+	esac
+
 	;;
+
 *)	pldlflags=''
+	static_target='static'
 	;;
 esac
 
@@ -119,15 +173,6 @@ for f in $nonxs_ext; do
     nonxs_list="$nonxs_list ext/$f/pm_to_blib"
 done
 
-# Handle the usage of different yaccs in posix-bc (During Configure we
-# us yacc for perly.y and byacc for a2p.y.  The makefiles must use the
-# same configuration for run_byacc!):
-case "$osname" in
-    posix-bc)
-	byacc=$yacc
-	;;
-esac
-
 echo "Extracting Makefile (with variable substitutions)"
 $spitshell >Makefile <<!GROK!THIS!
 # Makefile.SH
@@ -135,10 +180,7 @@ $spitshell >Makefile <<!GROK!THIS!
 # be lost the next time you run Configure.
 #  Makefile is used to generate $firstmakefile.  The only difference
 #  is that $firstmakefile has the dependencies filled in at the end.
-#
-#
-# I now supply perly.c with the kits, so don't remake perly.c without byacc
-BYACC = $byacc
+
 CC = $cc
 LD = $ld
 
@@ -177,6 +219,13 @@ LIBPERL = $libperl
 LLIBPERL= $linklibperl
 SHRPENV = $shrpenv
 
+# Static targets are ordinarily built without CCCDLFLAGS.  However,
+# if building a shared libperl.so that might later be linked into
+# another application, then it might be appropriate to also build static
+# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
+# for GNU cc).  This is handled by ext/util/make_ext.
+STATIC = $static_target
+
 # The following is used to include the current directory in
 # the dynamic loader path you are building a shared libperl.
 LDLIBPTH = $ldlibpth
@@ -189,7 +238,7 @@ DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
 
 libs = $perllibs $cryptlib
 
-public = perl $suidperl utilities translators
+public = perl\$(EXE_EXT) $suidperl utilities translators
 
 shellflags = $shellflags
 
@@ -197,6 +246,8 @@ shellflags = $shellflags
 # do it for you.
 $make_set_make
 
+# Mention $gmake here so it gets probed for by Configure.
+
 # These variables may need to be manually set for non-Unix systems.
 AR = $full_ar
 EXE_EXT = $_exe
@@ -217,21 +268,43 @@ SHELL = $sh
 # how to tr(anslate) newlines
 TRNL = '$trnl'
 
+OPTIMIZE = $optimize
+
+EXTRAS = $extras
+
+INSTALLPREFIXEXP = $prefix
+
 !GROK!THIS!
 # not used by Makefile but by installperl;
 # mentioned here so that metaconfig picks these up
 # $installusrbinperl
 # $versiononly
 
+case "${osname}:${osvers}" in
+darwin:*)
+$spitshell >>Makefile <<EOF
+
+# Your locales are broken (osname $osname, osvers $osvers)
+# and to avoid the numerous
+# perl: warning: Setting locale failed.
+# warnings during the build process we reset the locale variables.
+
+LC_ALL=C
+LANG=C
+LANGUAGE=C
+EOF
+	;;
+esac
 
 ## In the following dollars and backticks do not need the extra backslash.
 $spitshell >>Makefile <<'!NO!SUBS!'
 
-CCCMD    = `sh $(shellflags) cflags $(LIBPERL) $@`
+CCCMD    = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
 
-CCCMDSRC = `sh $(shellflags) cflags $(LIBPERL) $<`
+CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
 
-private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
+CONFIGPM = lib/Config.pm lib/Config_heavy.pl
+private = preplibrary $(CONFIGPM) lib/Config.pod lib/ExtUtils/Miniperl.pm
 
 # Files to be built with variable substitution before miniperl
 # is available.
@@ -245,47 +318,67 @@ shextract = Makefile cflags config.h makeaperl makedepend \
 # available.  Dependencies handled manually below (for now).
 
 pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
-	pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL \
-	pod/buildtoc.PL
+	pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
 
 # lib/lib.pm is not listed here because it has a rule of its own.
 plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
-	pod/pod2usage pod/podchecker pod/podselect \
-	pod/buildtoc
+	pod/pod2usage pod/podchecker pod/podselect
 
 addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
 
+# Unicode data files generated by mktables
+unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \
+	lib/unicore/Properties lib/unicore/Decomposition.pl \
+	lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl
+
+# Directories of Unicode data files generated by mktables
+unidatadirs = lib/unicore/To lib/unicore/lib
+
 h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
-h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
+h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
+h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
 h5 = utf8.h warnings.h
 h = $(h1) $(h2) $(h3) $(h4) $(h5)
 
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
 c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
+c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
 
-c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
+c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c opmini.c
 
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
 
 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
 
-# Once perl has been Configure'd and built ok you build different
-# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
-#	make clean; make LIBPERL=libperl<type>.a
-# where <type> is some combination of 'd' and(or) 'e' or 'm'.
-# See cflags to understand how this works.
-#
-# This mechanism is getting clunky and might not even work any more.
-# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
-#
-
-lintflags = -hbvxac
+lintflags = \
+    -bhn \
+    -p \
+    -s \
+    -Ncheck=%all \
+    -Nlevel=4 \
+    -errfmt=src \
+    -errtags \
+    -erroff=E_BAD_PTR_CAST \
+    -erroff=E_BLOCK_DECL_UNUSED \
+    -erroff=E_CONSTANT_CONDITION \
+    -erroff=E_BAD_PTR_CAST_ALIGN \
+    -erroff=E_PTRDIFF_OVERFLOW \
+    -erroff=E_EXPR_NULL_EFFECT \
+    -erroff=E_BAD_PTR_INT_COMBINATION \
+    -erroff=E_LOOP_EMPTY \
+    -erroff=E_TRUE_LOGICAL_EXPR \
+    -erroff=E_FALSE_LOGICAL_EXPR \
+    -erroff=E_INDISTING_FROM_TRUNC \
+    -erroff=E_POINTER_TO_OBJECT \
+    -erroff=E_ASSIGN_NARROW_CONV \
+    -erroff=E_BAD_SIGN_EXTEND \
+    -erroff=E_INCL_NUSD \
+    -erroff=E_MAIN_PARAM \
+    -Wfoo.flow
 
 .c$(OBJ_EXT):
 	$(CCCMD) $(PLDLFLAGS) $*.c
@@ -296,11 +389,11 @@ lintflags = -hbvxac
 .c.s:
 	$(CCCMDSRC) -S $*.c
 
-.PHONY: all compile translators utilities
-
-all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext)
+all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
 	@echo " ";
-	@echo "	Everything is up to date. 'make test' to run test suite."
+	@echo "	Everything is up to date. Type '$(MAKE) test' to run test suite."
+
+.PHONY: all compile translators utilities
 
 compile: all
 	echo "testing compilation" > testcompile;
@@ -308,10 +401,10 @@ compile: all
 	cd x2p; $(MAKE) compile;
 	cd pod; $(MAKE) compile;
 
-translators:	miniperl lib/Config.pm FORCE
+translators:	miniperl$(EXE_EXT) $(CONFIGPM) FORCE
 	@echo " "; echo "	Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
 
-utilities:	miniperl lib/Config.pm $(plextract) lib/lib.pm FORCE
+utilities:	miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE
 	@echo " "; echo "	Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
 
 
@@ -330,11 +423,12 @@ $spitshell >>Makefile <<!GROK!THIS!
 # if we have a symlink forest to another disk (it complains about too many
 # levels of symbolic links, even if we have only two)
 
-opmini\$(OBJ_EXT): op.c config.h
-	\$(RMS) opmini.c
-	\$(CPS) op.c opmini.c
+opmini.c: op.c
+	\$(CPS) op.c opmini.tmp
+	sh mv-if-diff opmini.tmp opmini.c
+
+opmini\$(OBJ_EXT): opmini.c
 	\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
-	\$(RMS) opmini.c
 
 !GROK!THIS!
 $spitshell >>Makefile <<'!NO!SUBS!'
@@ -345,9 +439,19 @@ perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
 	sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
 	sh mv-if-diff writemain.tmp perlmain.c
 
+!NO!SUBS!
+case "$osname" in
+cygwin)
+	;; # Let cygwin/Makefile.SHs do its work.
+*)
+	$spitshell >>Makefile <<'!NO!SUBS!'
 perlmain$(OBJ_EXT): perlmain.c
 	$(CCCMD) $(PLDLFLAGS) $*.c
 
+!NO!SUBS!
+	;;
+esac
+$spitshell >>Makefile <<'!NO!SUBS!'
 # The file ext.libs is a list of libraries that must be linked in
 # for static extensions, e.g. -lm -lgdbm, etc.  The individual
 # static extension Makefile's add to it.
@@ -407,7 +511,7 @@ PERLEXPORT		= perl.exp
 	esac
 	$spitshell >>Makefile <<'!NO!SUBS!'
 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
-	./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp
+	./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp.tmp
 	sh mv-if-diff perl.exp.tmp perl.exp
 
 !NO!SUBS!
@@ -417,7 +521,7 @@ os2)
 MINIPERLEXP		= miniperl
 
 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
-	./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
+	./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp.tmp
 	sh mv-if-diff perl.exp.tmp perl5.def
 
 !NO!SUBS!
@@ -437,7 +541,7 @@ $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
 	case "$useshrplib" in
 	true)
 		$spitshell >>Makefile <<'!NO!SUBS!'
-	$(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
+	$(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) $(libs)
 !NO!SUBS!
 		case "$osname" in
 		aix)
@@ -472,26 +576,47 @@ $(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
 !NO!SUBS!
 
 	case "${osname}${osvers}" in
-	next4*)
+	aix*|beos*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-	$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+	$(CC) -o miniperl $(CLDFLAGS) \
+	    `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
 	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
 !NO!SUBS!
 		;;
-	aix*)
+	next4*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
 miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-	$(CC) -o miniperl $(CLDFLAGS) \
-	    `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+	$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
 	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
 !NO!SUBS!
 		;;
+	darwin*)
+		case "$osvers" in
+		[1-6].*) ;;
+		*) case "$ldflags" in
+		    *"-flat_namespace"*) ;;
+		    *) # to allow opmini.o to override stuff in libperl.dylib
+		$spitshell >>Makefile <<!NO!SUBS!
+NAMESPACEFLAGS = -force_flat_namespace
+!NO!SUBS!
+		       ;;
+		    esac
+		    ;;
+		esac
+		$spitshell >>Makefile <<'!NO!SUBS!'
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+	-@rm -f miniperl.xok
+	$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \
+	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
+	$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+!NO!SUBS!
+		;;
 	*)
 		$spitshell >>Makefile <<'!NO!SUBS!'
-miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
 	-@rm -f miniperl.xok
 	$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
 	    miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
@@ -502,27 +627,38 @@ miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
 
 	$spitshell >>Makefile <<'!NO!SUBS!'
 
-perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	-@rm -f miniperl.xok
-	$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILING) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+	$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
 # Purify/Quantify Perls.
 
-pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
-purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
-quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
+# Valgrind perl (currently Linux only)
+
+perl.valgrind.config: config.sh
+	@echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
+	@$(MAKE) perl.config.dashg
+	@echo "Checking usemymalloc='n' in config.sh..."
+	@grep "^usemymalloc="    config.sh
+	@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
+	@echo "And of course you have to have valgrind..."
+	valgrind ./perl -e 1 2>/dev/null || exit 1
+
 # Third Degree Perl (Tru64 only)
 
 perl.config.dashg:
 	@echo "Checking optimize='-g' in config.sh..."
 	@grep "^optimize="     config.sh
-	@grep "^optimize='-g'" config.sh >/dev/null || exit 1
+	@egrep "^optimize='(-g|.*-g[1-3].*)'" config.sh >/dev/null || exit 1
 
 perl.third.config: config.sh
 	@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
@@ -532,7 +668,7 @@ perl.third.config: config.sh
 	@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
 
 perl.third: /usr/bin/atom perl.third.config perl
-	atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
+	atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
 	@echo "Now you may run perl.third and then study perl.3log."
 
 # Pixie Perls (Tru64 and IRIX only)
@@ -568,9 +704,26 @@ perl.gprof.config: config.sh
 
 perl.gprof: /usr/bin/gprof perl.gprof.config
 	@-rm -f perl
-	$(MAKE) PERL_SUFFIX=.gprof PERL_PROFILING=-pg perl
+	$(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
 	@echo "Now you may run perl.gprof and then run gprof perl.gprof."
 
+# Gcov Perl
+
+perl.config.gcov:
+	@echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
+	@echo "Checking gccversion in config.sh..."
+	@grep "^gccversion="      config.sh
+	@grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
+	@echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
+	@echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
+	@grep "^ccflags="      config.sh
+	@grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
+
+perl.gcov: perl.config.gcov
+	@-rm -f perl
+	$(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
+	@echo "Now you may run perl.gcov and then run gcov some.c."
+
 # Microperl.  This is just a convenience thing if one happens to
 # build also the full Perl and therefore the real big Makefile:
 # usually one should manually explicitly issue the below command.
@@ -584,7 +737,7 @@ microperl:
 # checks as well as the special code to validate that the script in question
 # has been invoked correctly.
 
-suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
 	$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
 
 !NO!SUBS!
@@ -601,38 +754,48 @@ sperl$(OBJ_EXT): perl.c $(h)
 
 # We have to call our ./makedir because Ultrix 4.3 make can't handle the line
 #	test -d lib/auto || mkdir lib/auto
+# We need to autosplit in two steps because VOS can't handle so many args
 #
 .PHONY: preplibrary
-preplibrary: miniperl lib/Config.pm lib/lib.pm lib/re.pm
+preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
 	@sh ./makedir lib/auto
 	@echo "	AutoSplitting perl library"
 	$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
-		autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+		autosplit_lib_modules(@ARGV)' lib/*.pm
+	$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+		autosplit_lib_modules(@ARGV)' lib/*/*.pm
+	$(MAKE) lib/re.pm
 
-# Take care to avoid modifying lib/Config.pm without reason
-# (If trying to create a new port and having problems with the configpm script,
-# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl configpm lib/re.pm
-	$(LDLIBPTH) ./miniperl configpm configpm.tmp
-	sh mv-if-diff configpm.tmp $@
+lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+	$(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
 
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+$(CONFIGPM): lib/Config.pod
+
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
 	$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
 	sh mv-if-diff minimod.tmp $@
 
 lib/re.pm: ext/re/re.pm
-	@-rm -f $@
-	cat ext/re/re.pm > $@
+	cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
 
-$(plextract):	miniperl lib/Config.pm
+$(plextract):	miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
 	@-rm -f $@
-	$(LDLIBPTH) ./miniperl -Ilib $@.PL
+	$(LDLIBPTH) ./miniperl -I`pwd`/lib $@.PL
 
-lib/lib.pm:	miniperl lib/Config.pm
+x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
+	cd x2p; $(LDLIBPTH) $(MAKE) s2p
+
+lib/lib.pm:	miniperl$(EXE_EXT) $(CONFIGPM)
 	@-rm -f $@
 	$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
 
-extra.pods: miniperl
+unidatafiles $(unidatafiles): uni.data
+
+uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
+	cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -w
+	touch uni.data
+
+extra.pods: miniperl$(EXE_EXT)
 	-@test -f extra.pods && rm -f `cat extra.pods`
 	-@rm -f extra.pods
 	-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
@@ -640,27 +803,44 @@ extra.pods: miniperl
 	    cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
 	    echo "pod/perl"$$nx".pod" >> extra.pods ; \
 	done
+	-@rm -f pod/perlvms.pod
 	-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
+	-@rm -f pod/perldelta.pod
+	-@test -f pod/perl593delta.pod && cd pod && $(LNS) perl593delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+extras.make: perl$(EXE_EXT)
+	-@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+
+extras.test: perl$(EXE_EXT)
+	-@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+
+extras.install: perl$(EXE_EXT)
+	-@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
 
 .PHONY: install install-strip install-all install-verbose install-silent \
-	no-install install.perl install.man installman install.html installhtml
+	no-install install.perl install.man install.html
+
+META.yml:	Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
+	$(LDLIBPTH) ./miniperl -Ilib Porting/makemeta
 
 install-strip:
-	$(MAKE) STRIPFLAGS=-s install
+	$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
 
 install install-all:
-	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS)
+	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
 
 install-verbose:
-	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V
+	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
 
 install-silent:
-	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S
+	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
 
 no-install:
-	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n
+	$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
+
+# Set this to an empty string to avoid an attempt of rebuild before install
+INSTALL_DEPENDENCE = all
 
-install.perl:	all installperl
+install.perl:	$(INSTALL_DEPENDENCE) installperl
 	if [ -n "$(COMPILE)" ]; \
 	then \
 		cd utils; $(MAKE) compile; \
@@ -668,48 +848,40 @@ install.perl:	all installperl
 		cd ../pod; $(MAKE) compile; \
 	else :; \
 	fi
-	$(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
+	$(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
+	$(MAKE) extras.install
 
 install.man:	all installman
-	$(LDLIBPTH) ./perl installman $(INSTALLFLAGS)
+	$(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
 
 # XXX Experimental. Hardwired values, but useful for testing.
 # Eventually Configure could ask for some of these values.
 install.html: all installhtml
 	-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
-	$(LDLIBPTH) ./perl installhtml                   \
+	$(LDLIBPTH) ./perl installhtml   \
       --podroot=. --podpath=. --recurse  \
-      --htmldir=$(privlib)/html     \
-      --htmlroot=$(privlib)/html    \
+      --htmldir=$(privlib)/html   \
+      --htmlroot=$(privlib)/html  \
       --splithead=pod/perlipc     \
       --splititem=pod/perlfunc    \
       --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+      --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \
       --verbose
 
 
 # I now supply perly.c with the kits, so the following section is
-# used only if you force byacc to run by saying
-# 	make run_byacc
-# Since we patch up the byacc output, the perly.fixer script needs
-# to run with precisely the same version of byacc as I use.  You
-# normally shouldn't remake perly.[ch].
-
-.PHONY: check_byacc run_byacc
-
-check_byacc:
-	@$(BYACC) -V 2>&1 | grep 'version 1\.8\.2'
-
-run_byacc:	FORCE check_byacc
-	$(BYACC) -d perly.y
-	-chmod 664 perly.c perly.h
-	sh $(shellflags) ./perly.fixer y.tab.c perly.c
-	sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-	    -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
-	sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
-	cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
-	perl -i perlyline.pl perly.c
-	chmod 664 vms/perly_c.vms vms/perly_h.vms
-	perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+# used only if you force bison to run by saying
+# 	make regen_perly
+# You normally shouldn't remake perly.[ch].
+
+.PHONY: regen_perly
+
+run_byacc:
+	@echo "run_byacc is obsolete; try 'make regen_perly' instead"
+
+# this outputs perly.act and perly.tab
+regen_perly:
+	perl regen_perly.pl
 
 # We don't want to regenerate perly.c and perly.h, but they might
 # appear out-of-date after a patch is applied or a new distribution is
@@ -720,11 +892,6 @@ perly.c: perly.y
 perly.h: perly.y
 	-@sh -c true
 
-PERLYVMS = vms/perly_c.vms vms/perly_h.vms
-
-$(PERLYVMS):	perly.c perly.h vms/vms_yfix.pl
-	perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
-
 # No compat3.sym here since and including the 5.004_50.
 # No interp.sym since 5.005_03.
 SYM  = global.sym globvar.sym perlio.sym pp.sym
@@ -734,68 +901,48 @@ SYMH = perlvars.h intrpvar.h thrdvar.h
 CHMOD_W = chmod +w
 
 # The following files are generated automatically
-#	keywords.pl:	keywords.h
-#	opcode.pl:	opcode.h opnames.h pp_proto.h pp.sym
-# [* embed.pl needs pp.sym generated by opcode.pl! *]
-#	embed.pl:	proto.h embed.h embedvar.h global.sym objXSUB.h
-#			perlapi.h perlapi.c pod/perlintern.pod
-#			pod/perlapi.pod
+#	autodoc.pl:	pod/perlapi.pod pod/perlintern.pod
 #	bytecode.pl:	ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c
 #			ext/B/B/Asmdata.pm
+#	embed.pl:	proto.h embed.h embedvar.h global.sym
+#			perlapi.h perlapi.c 
+# [* embed.pl needs pp.sym generated by opcode.pl! *]
+#	keywords.pl:	keywords.h
+#	opcode.pl:	opcode.h opnames.h pp_proto.h pp.sym
 #	regcomp.pl:	regnodes.h
 #	warnings.pl:	warnings.h lib/warnings.pm
 # The correct versions should be already supplied with the perl kit,
 # in case you don't have perl available.
-# To force them to be regenerated, type
-#	make regen_headers
-
-keywords.h:	keywords.pl
-	-perl keywords.pl
-
-OPCODE_PL_OUTPUT = opcode.h opnames.h pp_proto.h pp.sym
-
-$(OPCODE_PL_OUTPUT): opcode.pl
-	-perl opcode.pl
-
-# Really the prerequisites for the next rule  should only be "embed.pl pp.sym"
-# Writing it this way gives make a big hint to always run opcode.pl before
-# embed.pl. The alternative - running embed.pl then opcode.pl causes embed.pl
-# to be re-run next make invocation, and then all object files get recompiled.
-
-proto.h embed.h embedvar.h global.sym objXSUB.h perlapi.h perlapi.c pod/perlintern.pod pod/perlapi.pod: embed.pl $(OPCODE_PL_OUTPUT)
-	-perl embed.pl
-
-ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm: bytecode.pl
-	-perl bytecode.pl
-
-regnodes.h:	regcomp.pl
-	-perl regcomp.pl
-
-warnings.h lib/warnings.pm: warnings.pl
-	-perl warnings.pl
+# To force them to be regenerated, run
+#       perl regen.pl
+# with your existing copy of perl
+# (make regen_headers is kept for backwards compatibility)
 
 AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
 		embed.h embedvar.h global.sym \
 		pod/perlintern.pod pod/perlapi.pod \
-		objXSUB.h perlapi.h perlapi.c ext/ByteLoader/byterun.h \
+		perlapi.h perlapi.c ext/ByteLoader/byterun.h \
 		ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \
 		warnings.h lib/warnings.pm
 
 .PHONY: regen_headers regen_pods regen_all
 
-regen_headers:	FORCE
-	-$(CHMOD_W) $(AUTOGEN_FILES)
-	-perl keywords.pl
-	-perl opcode.pl
-	-perl embed.pl
-	-perl bytecode.pl
-	-perl regcomp.pl
-	-perl warnings.pl
+regen regen_headers:	FORCE
+	-perl regen.pl
 
 regen_pods:	FORCE
-	-cd pod; $(LDLIBPTH) make regen_pods
+	-cd pod; $(LDLIBPTH) $(MAKE) regen_pods
 
-regen_all: $(PERLYVMS) regen_headers regen_pods
+regen_all: regen regen_pods
+
+.PHONY:	manisort manicheck
+
+manisort:	FORCE
+	LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
+		LC_ALL=C sort -fdo MANIFEST MANIFEST)
+
+manicheck:	FORCE
+	perl Porting/manicheck
 
 # Extensions:
 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
@@ -807,20 +954,16 @@ regen_all: $(PERLYVMS) regen_headers regen_pods
 #
 # DynaLoader may be needed for extensions that use Makefile.PL.
 
-$(DYNALOADER):	miniperl preplibrary FORCE
-	@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+$(DYNALOADER):	miniperl$(EXE_EXT) preplibrary FORCE
+	@$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-d_dummy $(dynamic_ext):	miniperl preplibrary $(DYNALOADER) FORCE
-	@-rm -f lib/re.pm
-	@cat ext/re/re.pm > lib/re.pm
+d_dummy $(dynamic_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-s_dummy $(static_ext):	miniperl preplibrary $(DYNALOADER) FORCE
-	@-rm -f lib/re.pm
-	@cat ext/re/re.pm > lib/re.pm
-	@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+s_dummy $(static_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
+	@$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
-n_dummy $(nonxs_ext):	miniperl preplibrary $(DYNALOADER) FORCE
+n_dummy $(nonxs_ext):	miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
 	@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
 
 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
@@ -830,11 +973,11 @@ n_dummy $(nonxs_ext):	miniperl preplibrary $(DYNALOADER) FORCE
 clean:		_tidy _mopup
 
 realclean:	_realcleaner _mopup
-	@echo "Note that make realclean does not delete config.sh or Policy.sh"
+	@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
 
 _clobber:
 	-@rm -f Cross/run-* Cross/to-* Cross/from-*
-	rm -f config.sh cppstdin Policy.sh
+	rm -f config.sh cppstdin Policy.sh extras.lst
 
 clobber:	_realcleaner _mopup _clobber
 
@@ -846,16 +989,19 @@ veryclean:	_verycleaner _mopup _clobber
 
 # Do not 'make _mopup' directly.
 _mopup:
-	rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
+	rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c
+	-rmdir .depending
 	-@test -f extra.pods && rm -f `cat extra.pods`
 	-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-	-rm -f perl.exp ext.libs extra.pods opmini.o
+	-rm -f perl.exp ext.libs extra.pods uni.data opmini.o
 	-rm -f perl.export perl.dll perl.libexp perl.map perl.def
 	-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
 	-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
 	-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
 	-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-	rm -f perl suidperl miniperl $(LIBPERL) libperl.* microperl
+	-rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
+	-rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
+	-rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
 
 # Do not 'make _tidy' directly.
 _tidy:
@@ -876,17 +1022,31 @@ _cleaner1:
 	$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
 	done
 
+# Some systems do not support "?", so keep these files separate.
 _cleaner2:
-	rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+	-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
+	rm -f core *perl.core t/core t/*perl.core core.* t/core.*
+	rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
+	rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
 	rm -rf $(addedbyconf)
-	rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
+	rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
 	rm -f $(private)
+	rm -rf $(unidatafiles) $(unidatadirs)
 	rm -rf lib/auto
 	rm -f lib/.exists lib/*/.exists lib/*/*/.exists
 	rm -f h2ph.man pstruct
 	rm -rf .config
+	rm -f preload
 	rm -f testcompile compilelog
-	-rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys lib/Thread lib/XS
+	rm -rf lib/Encode
+	rm -f lib/ExtUtils/ParseXS/t/XSTest.c
+	rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
+	rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
+	-rmdir lib/B lib/Data
+	-rmdir lib/Compress/Zlib lib/Compress/Gzip lib/Compress
+	-rmdir lib/Filter/Util lib/IO/Socket lib/IO/Compress lib/IO/Uncompress
+	-rmdir lib/List lib/MIME lib/Scalar lib/Sys 
+	-rmdir lib/threads lib/XS
 
 _realcleaner:
 	@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
@@ -897,14 +1057,10 @@ _verycleaner:
 	@$(LDLIBPTH) $(MAKE) _cleaner2
 	-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
 
-# The following lint has practically everything turned on.  Unfortunately,
-# you have to wade through a lot of mumbo jumbo that can't be suppressed.
-# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
-# for that spot.
-
 .PHONY: lint
 lint: $(c)
-	lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+	rm -f *.ln
+	lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
 
 # Need to unset during recursion to go out of loop.
 # The README below ensures that the dependency list is never empty and
@@ -929,35 +1085,42 @@ depend: makedepend
 makedepend: makedepend.SH config.sh
 	sh ./makedepend.SH
 
-.PHONY: test check test_prep _test_prep \
+.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
 	test_tty test-tty _test_tty test_notty test-notty _test_notty \
-	utest ucheck test.utf8 check.utf8 \
+	utest ucheck test.utf8 check.utf8 test.torture torturetest \
+	test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
 	test.third check.third utest.third ucheck.third test_notty.third \
-	test.deparse test_notty.deparse \
-	minitest
+	test.deparse test_notty.deparse test_harness test_harness_notty \
+	test.bytecompile minitest coretest test.taintwarn
 
 # Cannot delegate rebuilding of t/perl to make
 # to allow interlaced test and minitest
 
-_test_prep: $(PERL)$(EXE_EXT)
+TESTFILE=TEST
+
+_test_prep:
 	cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
 
-test_prep: miniperl ./perl$(EXE_EXT) preplibrary utilities $(dynamic_ext) $(nonxs_ext) $(TEST_PERL_DLL)
+# Architecture-neutral stuff:
+
+test_prep_pre: preplibrary utilities $(nonxs_ext)
+
+test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
 	PERL=./perl $(MAKE) _test_prep
 
 _test_tty:
-	cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) TEST $(TEST_ARGS) </dev/tty
+	cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
 
 _test_notty:
-	cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) TEST $(TEST_ARGS)
+	cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
 
 # The second branch is for testing without a tty or controlling terminal,
 # see t/op/stat.t
 _test:
 	if (true </dev/tty) >/dev/null 2>&1; then \
-	  $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_tty   ; \
+	  $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty   ; \
 	else \
-	  $(MAKE) TEST_ARGS=$(TEST_ARGS) _test_notty ; \
+	  $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \
 	fi
 	@echo "Ran tests" > t/rantests
 
@@ -973,12 +1136,46 @@ test_notty: test_prep
 utest ucheck test.utf8 check.utf8: test_prep
 	PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
 
+coretest: test_prep
+	PERL=./perl TEST_ARGS=-core $(MAKE) _test
+
 test-prep:	test_prep
 
 test-tty:	test_tty
 
 test-notty:	test_notty
 
+# Torture testing
+
+test.torture torturetest:	test_prep
+	PERL=./perl TEST_ARGS=-torture $(MAKE) _test
+
+# Targets for UTF16 testing:
+
+minitest.utf16: minitest.prep
+	- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
+		&& $(LDLIBPTH) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+
+test.utf16 check.utf16: test_prep
+	PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
+
+utest.utf16 ucheck.utf16: test_prep
+	PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
+
+# Targets for valgrind testing:
+
+test_prep.valgrind: test_prep perl.valgrind
+	PERL=./perl $(MAKE) _test_prep
+
+test.valgrind check.valgrind:	test_prep perl.valgrind.config
+	PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 $(MAKE) _test
+
+utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind
+	PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
+
+test_notty.valgrind: test_prep.valgrind perl.valgrind
+	PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
+
 # Targets for Third Degree testing.
 
 test_prep.third: test_prep perl.third
@@ -993,6 +1190,11 @@ utest.third ucheck.third: test_prep.third perl.third
 test_notty.third: test_prep.third perl.third
 	PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
 
+# Targets for Bytecode/ByteLoader testing.
+
+test.bytecompile:	test_prep
+	PERL=./perl TEST_ARGS=-bytecompile $(MAKE) _test
+
 # Targets for Deparse testing.
 
 test.deparse:	test_prep
@@ -1001,13 +1203,32 @@ test.deparse:	test_prep
 test_notty.deparse:	test_prep
 	PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
 
+# Targets to run the test suite with -t
+
+test.taintwarn:	test_prep
+	PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
+
+minitest.prep:
+	-@test -f lib/lib.pm && test -f lib/Config.pm || \
+	  $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
+	@echo " "
+	@echo "You may see some irrelevant test failures if you have been unable"
+	@echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
+	@echo " "
+
 # Can't depend on lib/Config.pm because that might be where miniperl
 # is crashing.
-minitest: miniperl lib/re.pm
-	@echo "You may see some irrelevant test failures if you have been unable"
-	@echo "to build lib/Config.pm."
+minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep
 	- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
-		&& $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t </dev/tty
+		&& $(LDLIBPTH) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+
+# Test via harness
+
+test_harness: test_prep
+	PERL=./perl $(MAKE) TESTFILE=harness _test
+
+test_harness_notty: test_prep
+	PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
 
 # Handy way to run perlbug -ok without having to install and run the
 # installed perlbug. We don't re-run the tests here - we trust the user.
@@ -1074,14 +1295,15 @@ etags:	TAGS
 TAGS: emacs/cperl-mode.elc
 	sh emacs/ptags
 
-ctags:	tags
-
 # Let's hope make will not go into an infinite loop on case-unsensitive systems
 # This may also fail if . is in the head of the path, since perl will
 # require -Ilib
 tags:	TAGS
 	perl emacs/e2ctags.pl TAGS > tags
 
+ctags:
+	ctags -f Tags -N --totals --languages=c --langmap=c:+.h *.c *.h
+
 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
 # If this runs make out of memory, delete /usr/include lines.
 !NO!SUBS!
@@ -1098,44 +1320,11 @@ $rm -f $firstmakefile
 # Now do any special processing required before building.
 
 case "$ebcdic" in
-$define)
+define)
     xxx=''
-    echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4
+    echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
 case "$osname" in
 os390|posix-bc)
-    rm -f y.tab.c y.tab.h
-    # yacc must be a reentrant ("pure") Bison in BS2000 Posix!
-    yacc -d perly.y >/dev/null 2>&1
-    if cmp -s y.tab.c perly.c; then
-        rm -f y.tab.c
-    else
-        echo "perly.y -> perly.c" >&2
-        mv -f y.tab.c perly.c
-        chmod u+w perly.c
-        sed -e '/^#include "perl\.h"/a\
-\
-#define yydebug    PL_yydebug\
-#define yynerrs    PL_yynerrs\
-#define yyerrflag  PL_yyerrflag\
-#define yychar     PL_yychar\
-#define yyval      PL_yyval\
-#define yylval     PL_yylval'				\
-            -e '/YYSTYPE *yyval;/D'			\
-            -e '/YYSTYPE *yylval;/D'			\
-            -e '/int  yychar,/,/yynerrs;/D'		\
-            -e 's/int yydebug = 0;/yydebug = 0;/'	\
-            -e 's/[^_]realloc(/PerlMem_realloc(/g'	\
-            -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-            -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
-        xxx="$xxx perly.c"
-    fi
-    if cmp -s y.tab.h perly.h; then
-        rm -f y.tab.h
-    else
-        echo "perly.y -> perly.h" >&2
-        mv -f y.tab.h perly.h
-        xxx="$xxx perly.h"
-    fi
     if cd x2p
     then
         rm -f y.tab.c y.tab.h
@@ -1188,3 +1377,4 @@ esac
     ;;
 esac
 
+# ex: set ts=8 sts=4 sw=4 noet: