U8 => [qw(char)],
);
-my @optype= qw(OP UNOP BINOP LOGOP LISTOP PMOP SVOP PADOP PVOP LOOP COP);
-
-# Nullsv *must* come first in the following so that the condition
-# ($$sv == 0) can continue to be used to test (sv == Nullsv).
-my @specialsv = qw(Nullsv &PL_sv_undef &PL_sv_yes &PL_sv_no
- (SV*)pWARN_ALL (SV*)pWARN_NONE (SV*)pWARN_STD);
-
my (%alias_from, $from, $tos);
while (($from, $tos) = each %alias_to) {
map { $alias_from{$_} = $from } @$tos;
my $perl_header;
($perl_header = $c_header) =~ s{[/ ]?\*/?}{#}g;
-safer_unlink "ext/ByteLoader/byterun.c", "ext/ByteLoader/byterun.h", "ext/B/B/Asmdata.pm";
+safer_unlink "ext/B/B/Asmdata.pm";
#
# Start with boilerplate for Asmdata.pm
print ASMDATA_PM $perl_header, <<'EOT';
package B::Asmdata;
-our $VERSION = '1.01';
+our $VERSION = '1.02';
use Exporter;
@ISA = qw(Exporter);
@EXPORT_OK = qw(%insn_data @insn_name @optype @specialsv_name);
-our(%insn_data, @insn_name, @optype, @specialsv_name);
+our(%insn_data, @insn_name);
+use B qw(@optype @specialsv_name);
EOT
print ASMDATA_PM <<"EOT";
-\@optype = qw(@optype);
-\@specialsv_name = qw(@specialsv);
# XXX insn_data is initialised this way because with a large
# %insn_data = (foo => [...], bar => [...], ...) initialiser
# I get a hard-to-track-down stack underflow and segfault.
EOT
-#
-# Boilerplate for byterun.c
-#
-open(BYTERUN_C, ">ext/ByteLoader/byterun.c") or die "ext/ByteLoader/byterun.c: $!";
-binmode BYTERUN_C;
-print BYTERUN_C $c_header, <<'EOT';
-
-#define PERL_NO_GET_CONTEXT
-#include "EXTERN.h"
-#include "perl.h"
-#define NO_XSLOCKS
-#include "XSUB.h"
-
-#include "byterun.h"
-#include "bytecode.h"
-
-
-static const int optype_size[] = {
-EOT
-my $i = 0;
-for ($i = 0; $i < @optype - 1; $i++) {
- printf BYTERUN_C " sizeof(%s),\n", $optype[$i], $i;
-}
-printf BYTERUN_C " sizeof(%s)\n", $optype[$i], $i;
-
-my $size = @specialsv;
-
-print BYTERUN_C <<"EOT";
-};
-
-void *
-bset_obj_store(pTHX_ struct byteloader_state *bstate, void *obj, I32 ix)
-{
- if (ix > bstate->bs_obj_list_fill) {
- Renew(bstate->bs_obj_list, ix + 32, void*);
- bstate->bs_obj_list_fill = ix + 31;
- }
- bstate->bs_obj_list[ix] = obj;
- return obj;
-}
-
-int
-byterun(pTHX_ register struct byteloader_state *bstate)
-{
- dVAR;
- register int insn;
- U32 ix;
- SV *specialsv_list[$size];
-
- BYTECODE_HEADER_CHECK; /* croak if incorrect platform */
- Newx(bstate->bs_obj_list, 32, void*); /* set op objlist */
- bstate->bs_obj_list_fill = 31;
- bstate->bs_obj_list[0] = NULL; /* first is always Null */
- bstate->bs_ix = 1;
-
-EOT
-
-for my $i ( 0 .. $#specialsv ) {
- print BYTERUN_C " specialsv_list[$i] = $specialsv[$i];\n";
-}
-
-print BYTERUN_C <<'EOT';
-
- while ((insn = BGET_FGETC()) != EOF) {
- switch (insn) {
-EOT
-
-
my (@insn_name, $insn_num, $insn, $lvalue, $argtype, $flags, $fundtype);
while (<DATA>) {
if (/^\s*#/) {
- print BYTERUN_C if /^\s*#\s*(?:if|endif|el)/;
next;
}
chop;
$fundtype = $alias_from{$argtype} || $argtype;
#
- # Add the case statement and code for the bytecode interpreter in byterun.c
- #
- printf BYTERUN_C "\t case INSN_%s:\t\t/* %d */\n\t {\n",
- uc($insn), $insn_num;
- my $optarg = $argtype eq "none" ? "" : ", arg";
- if ($optarg) {
- printf BYTERUN_C "\t\t$argtype arg;\n\t\tBGET_%s(arg);\n", $fundtype;
- }
- if ($flags =~ /x/) {
- print BYTERUN_C "\t\tBSET_$insn($lvalue$optarg);\n";
- } elsif ($flags =~ /s/) {
- # Store instructions store to bytecode_obj_list[arg]. "lvalue" field is rvalue.
- print BYTERUN_C "\t\tBSET_OBJ_STORE($lvalue$optarg);\n";
- }
- elsif ($optarg && $lvalue ne "none") {
- print BYTERUN_C "\t\t$lvalue = ${rvalcast}arg;\n";
- }
- print BYTERUN_C "\t\tbreak;\n\t }\n";
-
- #
# Add the initialiser line for %insn_data in Asmdata.pm
#
print ASMDATA_PM <<"EOT";
}
#
-# Finish off byterun.c
-#
-print BYTERUN_C <<'EOT';
- default:
- Perl_croak(aTHX_ "Illegal bytecode instruction %d\n", insn);
- /* NOTREACHED */
- }
- }
- return 0;
-}
-
-/* ex: set ro: */
-EOT
-
-#
-# Write the instruction and optype enum constants into byterun.h
-#
-open(BYTERUN_H, ">ext/ByteLoader/byterun.h") or die "ext/ByteLoader/byterun.h: $!";
-binmode BYTERUN_H;
-print BYTERUN_H $c_header, <<'EOT';
-struct byteloader_fdata {
- SV *datasv;
- int next_out;
- int idx;
-};
-
-struct byteloader_pv_state {
- char *pvx;
- XPV xpv;
-};
-
-struct byteloader_state {
- struct byteloader_fdata *bs_fdata;
- SV *bs_sv;
- void **bs_obj_list;
- int bs_obj_list_fill;
- int bs_ix;
- struct byteloader_pv_state bs_pv;
- int bs_iv_overflows;
-};
-
-int bl_getc(struct byteloader_fdata *);
-int bl_read(struct byteloader_fdata *, char *, size_t, size_t);
-extern int byterun(pTHX_ struct byteloader_state *);
-
-enum {
-EOT
-
-my $add_enum_value = 0;
-my $max_insn;
-for $i ( 0 .. $#insn_name ) {
- $insn = uc($insn_name[$i]);
- if (defined($insn)) {
- $max_insn = $i;
- if ($add_enum_value) {
- print BYTERUN_H " INSN_$insn = $i,\t\t\t/* $i */\n";
- $add_enum_value = 0;
- } else {
- print BYTERUN_H " INSN_$insn,\t\t\t/* $i */\n";
- }
- } else {
- $add_enum_value = 1;
- }
-}
-
-print BYTERUN_H " MAX_INSN = $max_insn\n};\n";
-
-print BYTERUN_H "\nenum {\n";
-for ($i = 0; $i < @optype - 1; $i++) {
- printf BYTERUN_H " OPt_%s,\t\t/* %d */\n", $optype[$i], $i;
-}
-printf BYTERUN_H " OPt_%s\t\t/* %d */\n};\n\n", $optype[$i], $i;
-
-print BYTERUN_H "/* ex: set ro: */\n";
-
-#
# Finish off insn_data and create array initialisers in Asmdata.pm
#
print ASMDATA_PM <<'EOT';
=head1 NAME
-B::Asmdata - Autogenerated data about Perl ops, used to generate bytecode
+B::Asmdata - Autogenerated data about Perl ops
=head1 SYNOPSIS
close ASMDATA_PM or die "Error closing ASMDATA_PM: $!";
-close BYTERUN_H or die "Error closing BYTERUN_H: $!";
-close BYTERUN_C or die "Error closing BYTERUN_C: $!";
__END__
# First set instruction ord("#") to read comment to end-of-line (sneaky)
stpv bstate->bs_pv.pvx U32 x
ldspecsv bstate->bs_sv U8 x
ldspecsvx bstate->bs_sv U8 x
-newsv bstate->bs_sv U8 x
+newsv bstate->bs_sv svtype x
newsvx bstate->bs_sv svtype x
newop PL_op U8 x
newopx PL_op U16 x
newpv none PV
pv_cur bstate->bs_pv.xpv.xpv_cur STRLEN
pv_free bstate->bs_pv.pvx none x
-sv_upgrade bstate->bs_sv U8 x
+sv_upgrade bstate->bs_sv svtype x
sv_refcnt SvREFCNT(bstate->bs_sv) U32
sv_refcnt_add SvREFCNT(bstate->bs_sv) I32 x
sv_flags SvFLAGS(bstate->bs_sv) U32
#endif
pregcomp PL_op pvcontents x
op_pmflags cPMOP->op_pmflags U16
-op_pmpermflags cPMOP->op_pmpermflags U16
-op_pmdynflags cPMOP->op_pmdynflags U8
op_sv cSVOP->op_sv svindex
op_padix cPADOP->op_padix PADOFFSET
op_pv cPVOP->op_pv pvcontents
https://perl5.git.perl.org / perl5.git / blobdiff