;;
esac
-# H.Merijn Brand [17 Feb 2004]
-# This comment is just to ensure that Configure will find variables that
-# are removed/replaced in patches on blead, but are still needed in the
-# 5.8.x, 5.6.x and 5.005.x maintainance tracks.
-# metaconfig -m will scan all .SH files on this level (not deeper), and
-# not in x2p and other subfolders. This file is as good as any .SH
-# patch references
-# #22227 $baserev
-# #22302 $yacc $byacc
-
-# H.Merijn Brand [30 Oct 2004]
-# Mentioned for the same reason for future reference
-# #23434 $d_strlcat $d_strlcpy
-
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
;;
esac
+: is Cwd static or dynamic
+static_cwd='define'
+list_util_dep='$(PERL_EXE)'
+for f in $dynamic_ext; do
+ case $f in
+ Cwd) static_cwd='undef' ;;
+ List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext
+ esac
+done
+
: Prepare dependency lists for Makefile.
dynamic_list=' '
dynamic_ext_re="lib/auto/re/re.$dlext"
-extra_dep=''
+extra_dep='
+ext/Pod-Functions/pm_to_blib: cpan/Pod-Simple/pm_to_blib pod/perlfunc.pod
+'
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
: Parallel makes reveal that we have some interdependencies
case $f in
- Encode) extra_dep="$extra_dep
-$this_target: lib/auto/Cwd/Cwd.$dlext" ;;
Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
-$this_target: lib/auto/List/Util/Util.$dlext" ;;
+$this_target: $list_util_dep" ;;
Unicode/Normalize) extra_dep="$extra_dep
$this_target: uni.data" ;;
- Text/ParseWords) extra_dep="$extra_dep
-$this_target: lib/auto/Scalar/Util.$dlext" ;;
- SDBM_File) extra_dep="$extra_dep
-$this_target: lib/auto/Cwd/Cwd.$dlext" ;;
esac
done
dtrace_h=''
dtrace_o=''
+minidtrace_o=''
case "$usedtrace" in
define|true)
dtrace_h='perldtrace.h'
$dtrace -G -s perldtrace.d -o perldtrace.tmp >/dev/null 2>&1 \
- && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)'
+ && rm -f perldtrace.tmp && dtrace_o='perldtrace$(OBJ_EXT)' \
+ && minidtrace_o='miniperldtrace$(OBJ_EXT)'
;;
esac
# Mention $gmake here so it gets probed for by Configure.
+!GROK!THIS!
+
+case "${osname}" in
+linux*|darwin)
+$spitshell >>$Makefile <<!GROK!THIS!
# If you're going to use valgrind and it can't be invoked as plain valgrind
# then you'll need to change this, or override it on the make command line.
-VALGRIND=valgrind
+VALGRIND ?= valgrind
+VG_TEST ?= ./perl -e 1 2>/dev/null
+!GROK!THIS!
+ ;;
+esac
+
+$spitshell >>$Makefile <<!GROK!THIS!
DTRACE = $dtrace
DTRACE_H = $dtrace_h
DTRACE_O = $dtrace_o
+MINIDTRACE_O = $minidtrace_o
FIRSTMAKEFILE = $firstmakefile
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h
+private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h lib/buildcustomize.pl
# Files to be built with variable substitution before miniperl
# is available.
-sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
- myconfig.SH writemain.SH pod/Makefile.SH
-
-shextract = Makefile cflags config.h makeaperl makedepend \
- makedir myconfig writemain pod/Makefile
-
-# Files to be built with variable substitution after miniperl is
-# available. Dependencies handled manually below (for now).
+sh = Makefile.SH cflags.SH config_h.SH makedepend.SH myconfig.SH pod/Makefile.SH
-pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
- pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
+shextract = Makefile cflags config.h makedepend makedir myconfig pod/Makefile
-plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
- pod/pod2usage pod/podchecker pod/podselect
-
-addedbyconf = UU $(shextract) $(plextract) pstruct
+addedbyconf = UU $(shextract) pstruct
# Unicode data files generated by mktables
unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
+ lib/unicore/UCD.pl lib/unicore/Name.pm \
lib/unicore/Heavy.pl lib/unicore/mktables.lst
# Directories of Unicode data files generated by mktables
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h mydtrace.h op_reg_common.h
-h = $(h1) $(h2) $(h3) $(h4) $(h5)
+h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
+h6 = charclass_invlists.h
+h = $(h1) $(h2) $(h3) $(h4) $(h5) $(h6)
c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c
+c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c5 = $(madlysrc) $(mallocsrc)
-c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c perlmini.c
+c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
-obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
+obj0mini = perlmini$(OBJ_EXT) opmini$(OBJ_EXT) miniperlmain$(OBJ_EXT)
+obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT) keywords$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
-mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS) $(DTRACE_O)
+minindt_obj = $(obj0mini) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
+mini_obj = $(minindt_obj) $(MINIDTRACE_O)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
-perltoc_pod_prereqs = extra.pods pod/perl5136delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5173delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
+generated_headers = uudmap.h bitcount.h mg_data.h
-Icwd = -Idist/Cwd -Idist/Cwd/lib
+Icwd = -Idist/Cwd -Idist/Cwd/lib -Idist/Carp/lib
lintflags = \
-b \
.c.s:
$(CCCMDSRC) -S $*.c
-all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
# make sure that we recompile perl.c if the git version changes
perl$(OBJ_EXT): git_version.h
-translators: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE
- @echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
+!NO!SUBS!
+
+# Making utilities and translators require Cwd. If we have dynamic
+# loading, we only need miniperl and Cwd.$dlext. If we have static
+# loading, we need to build perl first.
+case "$usedl$static_cwd" in
+defineundef)
+ util_deps='$(MINIPERL_EXE) $(CONFIGPM) lib/auto/Cwd/Cwd$(DLSUFFIX) FORCE'
+ x2p_deps='$(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
+ ;;
+definedefine)
+ util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
+ x2p_deps='$(PERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE'
+ ;;
+*) util_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
+ x2p_deps='$(PERL_EXE) $(CONFIGPM) FORCE'
+ ;;
+esac
+
+$spitshell >>$Makefile <<!GROK!THIS!
+translators: $x2p_deps
+ @echo " "; echo " Making x2p stuff"; cd x2p; \$(LDLIBPTH) \$(MAKE) all
+
+x2p/s2p: $x2p_deps
+ cd x2p; \$(LDLIBPTH) \$(MAKE) s2p
+
+x2p/find2perl: $x2p_deps
+ cd x2p; \$(LDLIBPTH) \$(MAKE) find2perl
-utilities: $(MINIPERL_EXE) $(CONFIGPM) $(plextract) FORCE
- @echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
+utilities: $util_deps
+ @echo " "; echo " Making utilities"; cd utils; \$(LDLIBPTH) \$(MAKE) all
+!GROK!THIS!
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
$spitshell >>$Makefile <<'!NO!SUBS!'
-globals$(OBJ_EXT): uudmap.h bitcount.h
+globals$(OBJ_EXT): $(generated_headers)
-uudmap.h: bitcount.h
+uudmap.h mg_data.h: bitcount.h
bitcount.h: generate_uudmap$(HOST_EXE_EXT)
- $(RUN) ./generate_uudmap$(HOST_EXE_EXT) uudmap.h bitcount.h
+ $(RUN) ./generate_uudmap$(HOST_EXE_EXT) $(generated_headers)
+
+generate_uudmap$(OBJ_EXT): mg_raw.h
generate_uudmap$(HOST_EXE_EXT): generate_uudmap$(OBJ_EXT)
$(CC) -o generate_uudmap$(EXE_EXT) $(LDFLAGS) generate_uudmap$(OBJ_EXT) $(libs)
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c
-perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
- sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
+perlmain.c: $(MINIPERL_EXE) lib/ExtUtils/Miniperl.pm
+ $(MINIPERL) -Ilib -MExtUtils::Miniperl -e 'writemain(@ARGV)' DynaLoader $(static_ext) > perlmain.c
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
-perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
+perl.exp: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH)
+ ./$(MINIPERLEXP) makedef.pl --sort-fold PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" > perl.exp
!NO!SUBS!
;;
$spitshell >>$Makefile <<'!NO!SUBS!'
MINIPERLEXP = miniperl
-perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
+perl5.def: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH) miniperl.map
./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
!NO!SUBS!
case "$dtrace_h" in
?*)
$spitshell >>$Makefile <<'!NO!SUBS!'
+# dtrace dicards const qualifiers from arguments, put them back
$(DTRACE_H): perldtrace.d
- $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H)
+ $(DTRACE) -h -s perldtrace.d -o $(DTRACE_H).in
+ sed -e '/const/!s/char \*/const char */g' $(DTRACE_H).in >$(DTRACE_H)
+ $(RMS) $(DTRACE_H).in
mydtrace.h: $(DTRACE_H)
case "$dtrace_o" in
?*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(DTRACE_O): perldtrace.d
+$(DTRACE_O): perldtrace.d $(ndt_obj)
$(DTRACE) -G -s perldtrace.d -o $(DTRACE_O) $(ndt_obj)
+$(MINIDTRACE_O): perldtrace.d $(minindt_obj) perlmini$(OBJ_EXT)
+ $(DTRACE) -G -s perldtrace.d -o $(MINIDTRACE_O) $(minindt_obj) perlmini$(OBJ_EXT)
+
!NO!SUBS!
;;
esac
case "${osname}${osvers}" in
aix*|beos*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
- $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) \
- $(mini_obj) \
- miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
+$(MINIPERL_EXE): $& $(mini_obj)
+ $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(mini_obj) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
next4*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) perlmini$(OBJ_EXT) opmini$(OBJ_EXT)
- $(CC) -o $(MINIPERL_EXE) $(mini_obj) \
- miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
+$(MINIPERL_EXE): $& $(mini_obj)
+ $(CC) -o $(MINIPERL_EXE) $(mini_obj) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
+$(MINIPERL_EXE): $& $(mini_obj)
-@rm -f miniperl.xok
$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
- $(mini_obj) \
- miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
+ $(mini_obj) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
+$(MINIPERL_EXE): $& $(mini_obj)
-@rm -f miniperl.xok
$(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
- $(mini_obj) \
- miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
+ $(mini_obj) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
quant$(PERL_EXE): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
-# Valgrind perl (currently Linux only)
+!NO!SUBS!
+
+case "${osname}${osvers}" in
+linux*|darwin*)
+ $spitshell >>$Makefile <<'!NO!SUBS!'
+# Valgrind perl (currently Linux, Darwin only)
perl.valgrind.config: config.sh
@echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
- $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
+ $(VALGRIND) $(VG_TEST) || exit 1
+!NO!SUBS!
+ ;;
+esac
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
# Third Degree Perl (Tru64 only)
$spitshell >>$Makefile <<'!NO!SUBS!'
.PHONY: preplibrary
-preplibrary: $(MINIPERL_EXE) $(CONFIGPM) lib/re.pm $(PREPLIBRARY_LIBPERL)
+preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL)
$(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
$(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
-lib/re.pm: ext/re/re.pm
- @-rm -f $@
- cp ext/re/re.pm lib/re.pm
-
-$(plextract): $(MINIPERL_EXE) $(CONFIGPM) x2p/s2p $(dynamic_ext)
- @-rm -f $@
- $(MINIPERL) $@.PL
-
-x2p/s2p: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) x2p/s2p.PL
- cd x2p; $(LDLIBPTH) $(MAKE) s2p
+lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
+ $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
# But also this ensures that all extensions are built before we try to scan
# them, which picks up Devel::PPPort's documentation.
pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
- $(RUN_PERL) -f -Ilib pod/buildtoc --build-toc -q
+ $(RUN_PERL) -f -Ilib pod/buildtoc -q
pod/perlapi.pod: pod/perlintern.pod
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
-pod/perl5136delta.pod: pod/perldelta.pod
- $(LNS) perldelta.pod pod/perl5136delta.pod
+pod/perl5173delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5173delta.pod
+ $(LNS) perldelta.pod pod/perl5173delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
-install-strip:
+install_strip install-strip:
$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
-install install-all:
+install install_all install-all:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
-install-verbose:
+install_verbose install-verbose:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
-install-silent:
+install_silent install-silent:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
-no-install:
+no_install no-install:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
# Set this to an empty string to avoid an attempt of rebuild before install
--htmlroot=$(privlib)/html \
--splithead=pod/perlipc \
--splititem=pod/perlfunc \
- --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
--ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
.PHONY: regen_perly
-run_byacc:
+run_byacc run-byacc:
@echo "run_byacc is obsolete; try 'make regen_perly' instead"
# this outputs perly.h, perly.act and perly.tab
-regen_perly:
+regen_perly regen-perly:
perl regen_perly.pl
# We don't want to regenerate perly.c and perly.h, but they might
perly.h: perly.y
-@sh -c true
-# No compat3.sym here since and including the 5.004_50.
-# No interp.sym since 5.005_03.
-SYM = global.sym globvar.sym perlio.sym pp.sym
+SYM = globvar.sym perlio.sym
SYMH = perlvars.h intrpvar.h
CHMOD_W = chmod +w
# The following files are generated automatically
-# embed.pl: proto.h embed.h embedvar.h global.sym
-# perlapi.h perlapi.c
-# [* embed.pl needs pp.sym generated by opcode.pl! *]
-# keywords.pl: keywords.h
-# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
+# embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c
+# opcode.pl: opcode.h opnames.h pp_proto.h
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
+# feature.pl: feature.h lib/feature.pm
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to be regenerated, run
# with your existing copy of perl
# (make regen_headers is kept for backwards compatibility)
-AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
- embed.h embedvar.h global.sym \
- perlapi.h perlapi.c regnodes.h \
- warnings.h lib/warnings.pm
+AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \
+ perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \
+ lib/feature.pm feature.h
.PHONY: regen_headers regen_all
regen: FORCE
-perl regen.pl
+ -perl regen/uconfig_h.pl
-regen_headers: FORCE
+regen_headers regen-headers: FORCE
-perl regen.pl -v
+ -perl regen/uconfig_h.pl -v
-regen_meta: META.yml
+regen_meta regen-meta: META.yml
META.yml: FORCE
PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(RUN_PERL) -Ilib Porting/makemeta
-regen_all: regen regen_meta
+regen_all regen-all: regen regen_meta
.PHONY: manisort manicheck
#
# DynaLoader may be needed for extensions that use Makefile.PL.
-$(DYNALOADER): $(MINIPERL_EXE) preplibrary FORCE $(nonxs_ext)
+$(DYNALOADER): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE $(nonxs_ext)
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-d_dummy $(dynamic_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
+d_dummy $(dynamic_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE $(PERLEXPORT)
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
-s_dummy $(static_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
+s_dummy $(static_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-n_dummy $(nonxs_ext): $(MINIPERL_EXE) preplibrary FORCE
+n_dummy $(nonxs_ext): $(MINIPERL_EXE) lib/buildcustomize.pl preplibrary FORCE
$(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
!NO!SUBS!
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT) bitcount.h
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c generate_uudmap$(EXE_EXT) $(generated_headers)
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
+ -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o pod/roffitall
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
- -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
-rm -f config.arch config.over $(DTRACE_H) runtests
# Do not 'make _tidy' directly.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
- rm -f t/misctmp* t/forktmp* t/tmp* t/c t/$(PERL_EXE) t/rantests
+ rm -f t/$(PERL_EXE) t/rantests
+ rm -rf t/tmp*
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
- rm -f preload lib/re.pm
+ rm -f preload
rm -rf lib/Encode lib/Compress lib/Hash lib/re
rm -rf lib/TAP lib/Module/Pluggable lib/App
rm -rf lib/mro
rm -fr lib/B
rm -fr lib/CPAN lib/CPANPLUS
rm -fr lib/ExtUtils/CBuilder
+ rm -f pod2htmd.tmp
+ rm -rf pod/perlfunc pod/perlipc
-rmdir cpan/CPANPLUS-Dist-Build/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-cpanplus cpan/CPANPLUS/t/dummy-localmirror
-rmdir ext/B/lib
-rmdir lib/Archive/Tar lib/Archive lib/Attribute
- -rmdir lib/CGI
+ -rmdir lib/CGI lib/Carp
-rmdir lib/Data lib/Devel lib/Digest
-rmdir lib/ExtUtils/Command lib/ExtUtils/Constant lib/ExtUtils/Liblist lib/ExtUtils/MakeMaker
-rmdir lib/File/Spec lib/Filter/Util lib/Filter
-rmdir lib/Package lib/Params
-rmdir lib/Pod/Perldoc lib/Pod/Simple lib/Pod/Text
-rmdir lib/Sys lib/Scalar/Util lib/Scalar
- -rmdir lib/Term/UI lib/Thread
+ -rmdir lib/Term/UI lib/Thread lib/Tie/Hash
-rmdir lib/Test/Builder/Tester lib/Test/Builder lib/Test
-rmdir lib/Unicode/Collate
-rmdir lib/XS/APItest lib/XS
config.h: config_h.SH config.sh
$(SHELL) config_h.SH
-# When done, touch perlmain.c so that it doesn't get remade each time.
.PHONY: depend
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- - test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
test_prep_pre: preplibrary utilities $(nonxs_ext)
-test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) $(dynamic_ext) $(TEST_PERL_DLL) runtests
+test_prep test-prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
+ $(dynamic_ext) $(TEST_PERL_DLL) runtests x2p/s2p x2p/find2perl \
+ $(generated_pods)
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
test_prep_reonly: $(MINIPERL_EXE) $(PERL_EXE) $(dynamic_ext_re) $(TEST_PERL_DLL)
test check: test_prep
$(RUN_TESTS) choose
-test_tty: test_prep
+test_tty test-tty: test_prep
$(RUN_TESTS) tty
-test_notty: test_prep
+test_notty test-notty: test_prep
$(RUN_TESTS) no-tty
utest ucheck test.utf8 check.utf8: test_prep
coretest: test_prep
TEST_ARGS=-core $(RUN_TESTS) choose
-test-prep: test_prep
-
-test-tty: test_tty
-
-test-notty: test_notty
-
# Torture testing
test.torture torturetest: test_prep
minitest.utf16: minitest.prep
- cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
- && $(RUN_PERL) TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
+ && $(RUN_PERL) TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
test.utf16 check.utf16: test_prep
TEST_ARGS=-utf16 $(RUN_TESTS) choose
utest.utf16 ucheck.utf16: test_prep
TEST_ARGS="-utf8 -utf16" $(RUN_TESTS) choose
+!NO!SUBS!
+
+case "${osname}${osvers}" in
+linux*|darwin*)
+ $spitshell >>$Makefile <<'!NO!SUBS!'
# Targets for valgrind testing:
test_prep.valgrind: test_prep perl.valgrind
test_notty.valgrind: test_prep.valgrind perl.valgrind.config
PERL_VALGRIND=1 $(RUN_TESTS) no-tty
+!NO!SUBS!
+ ;;
+esac
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
# Targets for Third Degree testing.
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: $(MINIPERL_EXE) lib/re.pm minitest.prep
+minitest: $(MINIPERL_EXE) minitest.prep
- cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE)) \
- && $(RUN_PERL) TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
+ && $(RUN_PERL) TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
# Test via harness
-test_harness: test_prep
+test_harness test-harness: test_prep
TESTFILE=harness $(RUN_TESTS) choose
test_harness_notty: test_prep
HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
-test-reonly: test_prep_reonly
+test_reonly test-reonly: test_prep_reonly
TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
# Porting tests (well-formedness of pod, manifest, etc)
-test_porting: test_prep
- cd t && $(RUN_PERL) harness porting/*.t
+test_porting test-porting: test_prep
+ cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
nokfilenack: utilities
$(RUN_PERL) -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
-.PHONY: clist hlist shlist pllist
+.PHONY: clist hlist shlist
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
shlist: $(sh)
echo $(sh) | tr ' ' $(TRNL) >.shlist
-pllist: $(pl)
- echo $(pl) | tr ' ' $(TRNL) >.pllist
-
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
-.PHONY: elc
-elc: emacs/cperl-mode.elc
-
-emacs/cperl-mode.elc: emacs/cperl-mode.el
- -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
-
-.PHONY: etags ctags tags
-
-etags: TAGS
-
-TAGS: emacs/cperl-mode.elc
- sh emacs/ptags
-
-# Let's hope make will not go into an infinite loop on case-unsensitive systems
-# This may also fail if . is in the head of the path, since perl will
-# require -Ilib
-tags: TAGS
- perl emacs/e2ctags.pl TAGS > tags
+.PHONY: ctags
ctags:
ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
https://perl5.git.perl.org / perl5.git / blobdiff