void
Perl_av_reify(pTHX_ AV *av)
{
- dVAR;
- I32 key;
+ SSize_t key;
PERL_ARGS_ASSERT_AV_REIFY;
assert(SvTYPE(av) == SVt_PVAV);
#endif
key = AvMAX(av) + 1;
while (key > AvFILLp(av) + 1)
- AvARRAY(av)[--key] = &PL_sv_undef;
+ AvARRAY(av)[--key] = NULL;
while (key) {
SV * const sv = AvARRAY(av)[--key];
- assert(sv);
if (sv != &PL_sv_undef)
- SvREFCNT_inc_simple_void_NN(sv);
+ SvREFCNT_inc_simple_void(sv);
}
key = AvARRAY(av) - AvALLOC(av);
while (key)
- AvALLOC(av)[--key] = &PL_sv_undef;
+ AvALLOC(av)[--key] = NULL;
AvREIFY_off(av);
AvREAL_on(av);
}
*/
void
-Perl_av_extend(pTHX_ AV *av, I32 key)
+Perl_av_extend(pTHX_ AV *av, SSize_t key)
{
- dVAR;
MAGIC *mg;
PERL_ARGS_ASSERT_AV_EXTEND;
/* The guts of av_extend. *Not* for general use! */
void
-Perl_av_extend_guts(pTHX_ AV *av, I32 key, SSize_t *maxp, SV ***allocp,
+Perl_av_extend_guts(pTHX_ AV *av, SSize_t key, SSize_t *maxp, SV ***allocp,
SV ***arrayp)
{
- dVAR;
-
PERL_ARGS_ASSERT_AV_EXTEND_GUTS;
+ if (key < -1) /* -1 is legal */
+ Perl_croak(aTHX_
+ "panic: av_extend_guts() negative count (%" IVdf ")", (IV)key);
+
if (key > *maxp) {
SV** ary;
- I32 tmp;
- I32 newmax;
+ SSize_t tmp;
+ SSize_t newmax;
if (av && *allocp != *arrayp) {
ary = *allocp + AvFILLp(av) + 1;
*arrayp = *allocp;
if (AvREAL(av)) {
while (tmp)
- ary[--tmp] = &PL_sv_undef;
+ ary[--tmp] = NULL;
}
if (key > *maxp - 10) {
newmax = key + *maxp;
}
}
else {
-#ifdef PERL_MALLOC_WRAP
- static const char oom_array_extend[] =
- "Out of memory during array extend"; /* Duplicated in pp_hot.c */
-#endif
-
if (*allocp) {
#ifdef Perl_safesysmalloc_size
based on calling Perl_safesysmalloc_size() immediately after
allocation, I'm not convinced that it is a great idea here.
In an array we have to loop round setting everything to
- &PL_sv_undef, which means writing to memory, potentially lots
+ NULL, which means writing to memory, potentially lots
of it, whereas for the SV buffer case we don't touch the
"bonus" memory. So there there is no cost in telling the
world about it, whereas here we have to do work before we can
if (key <= newmax)
goto resized;
#endif
- newmax = key + *maxp / 5;
+ /* overflow-safe version of newmax = key + *maxp/5 */
+ newmax = *maxp / 5;
+ newmax = (key > SSize_t_MAX - newmax)
+ ? SSize_t_MAX : key + newmax;
resize:
- MEM_WRAP_CHECK_1(newmax+1, SV*, oom_array_extend);
+ {
+#ifdef PERL_MALLOC_WRAP /* Duplicated in pp_hot.c */
+ static const char oom_array_extend[] =
+ "Out of memory during array extend";
+#endif
+ /* it should really be newmax+1 here, but if newmax
+ * happens to equal SSize_t_MAX, then newmax+1 is
+ * undefined. This means technically we croak one
+ * index lower than we should in theory; in practice
+ * its unlikely the system has SSize_t_MAX/sizeof(SV*)
+ * bytes to spare! */
+ MEM_WRAP_CHECK_1(newmax, SV*, oom_array_extend);
+ }
+#ifdef STRESS_REALLOC
+ {
+ SV ** const old_alloc = *allocp;
+ Newx(*allocp, newmax+1, SV*);
+ Copy(old_alloc, *allocp, *maxp + 1, SV*);
+ Safefree(old_alloc);
+ }
+#else
Renew(*allocp,newmax+1, SV*);
+#endif
#ifdef Perl_safesysmalloc_size
resized:
#endif
}
else {
newmax = key < 3 ? 3 : key;
- MEM_WRAP_CHECK_1(newmax+1, SV*, oom_array_extend);
+ {
+#ifdef PERL_MALLOC_WRAP /* Duplicated in pp_hot.c */
+ static const char oom_array_extend[] =
+ "Out of memory during array extend";
+#endif
+ /* see comment above about newmax+1*/
+ MEM_WRAP_CHECK_1(newmax, SV*, oom_array_extend);
+ }
Newx(*allocp, newmax+1, SV*);
ary = *allocp + 1;
tmp = newmax;
- *allocp[0] = &PL_sv_undef; /* For the stacks */
+ *allocp[0] = NULL; /* For the stacks */
}
if (av && AvREAL(av)) {
while (tmp)
- ary[--tmp] = &PL_sv_undef;
+ ary[--tmp] = NULL;
}
*arrayp = *allocp;
See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for
more information on how to use this function on tied arrays.
-The rough perl equivalent is C<$myarray[$idx]>.
+The rough perl equivalent is C<$myarray[$key]>.
=cut
*/
static bool
-S_adjust_index(pTHX_ AV *av, const MAGIC *mg, I32 *keyp)
+S_adjust_index(pTHX_ AV *av, const MAGIC *mg, SSize_t *keyp)
{
bool adjust_index = 1;
if (mg) {
SV * const * const negative_indices_glob =
hv_fetchs(SvSTASH(SvRV(ref)), NEGATIVE_INDICES_VAR, 0);
- if (negative_indices_glob && SvTRUE(GvSV(*negative_indices_glob)))
+ if (negative_indices_glob && isGV(*negative_indices_glob)
+ && SvTRUE(GvSV(*negative_indices_glob)))
adjust_index = 0;
}
}
}
SV**
-Perl_av_fetch(pTHX_ AV *av, I32 key, I32 lval)
+Perl_av_fetch(pTHX_ AV *av, SSize_t key, I32 lval)
{
- dVAR;
+ SSize_t neg;
+ SSize_t size;
PERL_ARGS_ASSERT_AV_FETCH;
assert(SvTYPE(av) == SVt_PVAV);
- if (SvRMAGICAL(av)) {
+ if (UNLIKELY(SvRMAGICAL(av))) {
const MAGIC * const tied_magic
= mg_find((const SV *)av, PERL_MAGIC_tied);
if (tied_magic || mg_find((const SV *)av, PERL_MAGIC_regdata)) {
}
}
- if (key < 0) {
- key += AvFILL(av) + 1;
- if (key < 0)
+ neg = (key < 0);
+ size = AvFILLp(av) + 1;
+ key += neg * size; /* handle negative index without using branch */
+
+ /* the cast from SSize_t to Size_t allows both (key < 0) and (key >= size)
+ * to be tested as a single condition */
+ if ((Size_t)key >= (Size_t)size) {
+ if (UNLIKELY(neg))
return NULL;
+ goto emptyness;
}
- if (key > AvFILLp(av) || AvARRAY(av)[key] == &PL_sv_undef) {
+ if (!AvARRAY(av)[key]) {
emptyness:
return lval ? av_store(av,key,newSV(0)) : NULL;
}
- if (AvREIFY(av)
- && (!AvARRAY(av)[key] /* eg. @_ could have freed elts */
- || SvIS_FREED(AvARRAY(av)[key]))) {
- AvARRAY(av)[key] = &PL_sv_undef; /* 1/2 reify */
- goto emptyness;
- }
return &AvARRAY(av)[key];
}
=for apidoc av_store
Stores an SV in an array. The array index is specified as C<key>. The
-return value will be NULL if the operation failed or if the value did not
+return value will be C<NULL> if the operation failed or if the value did not
need to be actually stored within the array (as in the case of tied
-arrays). Otherwise, it can be dereferenced
+arrays). Otherwise, it can be dereferenced
to get the C<SV*> that was stored
there (= C<val>)).
Note that the caller is responsible for suitably incrementing the reference
count of C<val> before the call, and decrementing it if the function
-returned NULL.
+returned C<NULL>.
-Approximate Perl equivalent: C<$myarray[$key] = $val;>.
+Approximate Perl equivalent: C<splice(@myarray, $key, 1, $val)>.
See L<perlguts/"Understanding the Magic of Tied Hashes and Arrays"> for
more information on how to use this function on tied arrays.
*/
SV**
-Perl_av_store(pTHX_ AV *av, I32 key, SV *val)
+Perl_av_store(pTHX_ AV *av, SSize_t key, SV *val)
{
- dVAR;
SV** ary;
PERL_ARGS_ASSERT_AV_STORE;
(unicode_alternate may be NULL).
*/
- if (!val)
- val = &PL_sv_undef;
-
if (SvRMAGICAL(av)) {
const MAGIC * const tied_magic = mg_find((const SV *)av, PERL_MAGIC_tied);
if (tied_magic) {
if (!S_adjust_index(aTHX_ av, tied_magic, &key))
return 0;
}
- if (val != &PL_sv_undef) {
+ if (val) {
mg_copy(MUTABLE_SV(av), val, 0, key);
}
return NULL;
if (av == PL_curstack && key > PL_stack_sp - PL_stack_base)
PL_stack_sp = PL_stack_base + key; /* XPUSH in disguise */
do {
- ary[++AvFILLp(av)] = &PL_sv_undef;
+ ary[++AvFILLp(av)] = NULL;
} while (AvFILLp(av) < key);
}
AvFILLp(av) = key;
bool set = TRUE;
for (; mg; mg = mg->mg_moremagic) {
if (!isUPPER(mg->mg_type)) continue;
- if (val != &PL_sv_undef) {
+ if (val) {
sv_magic(val, MUTABLE_SV(av), toLOWER(mg->mg_type), 0, key);
}
if (PL_delaymagic && mg->mg_type == PERL_MAGIC_isa) {
=for apidoc av_make
Creates a new AV and populates it with a list of SVs. The SVs are copied
-into the array, so they may be freed after the call to av_make. The new AV
+into the array, so they may be freed after the call to C<av_make>. The new AV
will have a reference count of 1.
Perl equivalent: C<my @new_array = ($scalar1, $scalar2, $scalar3...);>
*/
AV *
-Perl_av_make(pTHX_ I32 size, SV **strp)
+Perl_av_make(pTHX_ SSize_t size, SV **strp)
{
AV * const av = MUTABLE_AV(newSV_type(SVt_PVAV));
/* sv_upgrade does AvREAL_only() */
if (size) { /* "defined" was returning undef for size==0 anyway. */
SV** ary;
- I32 i;
+ SSize_t i;
+ SSize_t orig_ix;
+
Newx(ary,size,SV*);
AvALLOC(av) = ary;
AvARRAY(av) = ary;
AvMAX(av) = size - 1;
AvFILLp(av) = -1;
- ENTER;
- SAVEFREESV(av);
+ /* avoid av being leaked if croak when calling magic below */
+ EXTEND_MORTAL(1);
+ PL_tmps_stack[++PL_tmps_ix] = (SV*)av;
+ orig_ix = PL_tmps_ix;
+
for (i = 0; i < size; i++) {
assert (*strp);
SV_DO_COW_SVSETSV|SV_NOSTEAL);
strp++;
}
- SvREFCNT_inc_simple_void_NN(av);
- LEAVE;
+ /* disarm av's leak guard */
+ if (LIKELY(PL_tmps_ix == orig_ix))
+ PL_tmps_ix--;
+ else
+ PL_tmps_stack[orig_ix] = &PL_sv_undef;
}
return av;
}
/*
=for apidoc av_clear
-Clears an array, making it empty. Does not free the memory the av uses to
-store its list of scalars. If any destructors are triggered as a result,
-the av itself may be freed when this function returns.
+Frees the all the elements of an array, leaving it empty.
+The XS equivalent of C<@array = ()>. See also L</av_undef>.
-Perl equivalent: C<@myarray = ();>.
+Note that it is possible that the actions of a destructor called directly
+or indirectly by freeing an element of the array could cause the reference
+count of the array itself to be reduced (e.g. by deleting an entry in the
+symbol table). So it is a possibility that the AV could have been freed
+(or even reallocated) on return from the call unless you hold a reference
+to it.
=cut
*/
void
Perl_av_clear(pTHX_ AV *av)
{
- dVAR;
- I32 extra;
+ SSize_t extra;
bool real;
+ SSize_t orig_ix = 0;
PERL_ARGS_ASSERT_AV_CLEAR;
assert(SvTYPE(av) == SVt_PVAV);
if (AvMAX(av) < 0)
return;
- if ((real = !!AvREAL(av))) {
+ if ((real = cBOOL(AvREAL(av)))) {
SV** const ary = AvARRAY(av);
- I32 index = AvFILLp(av) + 1;
- ENTER;
- SAVEFREESV(SvREFCNT_inc_simple_NN(av));
+ SSize_t index = AvFILLp(av) + 1;
+
+ /* avoid av being freed when calling destructors below */
+ EXTEND_MORTAL(1);
+ PL_tmps_stack[++PL_tmps_ix] = SvREFCNT_inc_simple_NN(av);
+ orig_ix = PL_tmps_ix;
+
while (index) {
SV * const sv = ary[--index];
/* undef the slot before freeing the value, because a
* destructor might try to modify this array */
- ary[index] = &PL_sv_undef;
+ ary[index] = NULL;
SvREFCNT_dec(sv);
}
}
AvARRAY(av) = AvALLOC(av);
}
AvFILLp(av) = -1;
- if (real) LEAVE;
+ if (real) {
+ /* disarm av's premature free guard */
+ if (LIKELY(PL_tmps_ix == orig_ix))
+ PL_tmps_ix--;
+ else
+ PL_tmps_stack[orig_ix] = &PL_sv_undef;
+ SvREFCNT_dec_NN(av);
+ }
}
/*
=for apidoc av_undef
-Undefines the array. Frees the memory used by the av to store its list of
-scalars. If any destructors are triggered as a result, the av itself may
-be freed.
+Undefines the array. The XS equivalent of C<undef(@array)>.
+
+As well as freeing all the elements of the array (like C<av_clear()>), this
+also frees the memory used by the av to store its list of scalars.
+
+See L</av_clear> for a note about the array possibly being invalid on
+return.
=cut
*/
Perl_av_undef(pTHX_ AV *av)
{
bool real;
+ SSize_t orig_ix = PL_tmps_ix; /* silence bogus warning about possible unitialized use */
PERL_ARGS_ASSERT_AV_UNDEF;
assert(SvTYPE(av) == SVt_PVAV);
if (SvTIED_mg((const SV *)av, PERL_MAGIC_tied))
av_fill(av, -1);
- if ((real = !!AvREAL(av))) {
- I32 key = AvFILLp(av) + 1;
- ENTER;
- SAVEFREESV(SvREFCNT_inc_simple_NN(av));
+ real = cBOOL(AvREAL(av));
+ if (real) {
+ SSize_t key = AvFILLp(av) + 1;
+
+ /* avoid av being freed when calling destructors below */
+ EXTEND_MORTAL(1);
+ PL_tmps_stack[++PL_tmps_ix] = SvREFCNT_inc_simple_NN(av);
+ orig_ix = PL_tmps_ix;
+
while (key)
SvREFCNT_dec(AvARRAY(av)[--key]);
}
AvMAX(av) = AvFILLp(av) = -1;
if(SvRMAGICAL(av)) mg_clear(MUTABLE_SV(av));
- if(real) LEAVE;
+ if (real) {
+ /* disarm av's premature free guard */
+ if (LIKELY(PL_tmps_ix == orig_ix))
+ PL_tmps_ix--;
+ else
+ PL_tmps_stack[orig_ix] = &PL_sv_undef;
+ SvREFCNT_dec_NN(av);
+ }
}
/*
/*
=for apidoc av_push
-Pushes an SV onto the end of the array. The array will grow automatically
-to accommodate the addition. This takes ownership of one reference count.
+Pushes an SV (transferring control of one reference count) onto the end of the
+array. The array will grow automatically to accommodate the addition.
-Perl equivalent: C<push @myarray, $elem;>.
+Perl equivalent: C<push @myarray, $val;>.
=cut
*/
void
Perl_av_push(pTHX_ AV *av, SV *val)
{
- dVAR;
MAGIC *mg;
PERL_ARGS_ASSERT_AV_PUSH;
SV *
Perl_av_pop(pTHX_ AV *av)
{
- dVAR;
SV *retval;
MAGIC* mg;
if (AvFILL(av) < 0)
return &PL_sv_undef;
retval = AvARRAY(av)[AvFILLp(av)];
- AvARRAY(av)[AvFILLp(av)--] = &PL_sv_undef;
+ AvARRAY(av)[AvFILLp(av)--] = NULL;
if (SvSMAGICAL(av))
mg_set(MUTABLE_SV(av));
- return retval;
+ return retval ? retval : &PL_sv_undef;
}
/*
=for apidoc av_unshift
Unshift the given number of C<undef> values onto the beginning of the
-array. The array will grow automatically to accommodate the addition. You
-must then use C<av_store> to assign values to these new elements.
+array. The array will grow automatically to accommodate the addition.
-Perl equivalent: C<unshift @myarray, ( (undef) x $n );>
+Perl equivalent: S<C<unshift @myarray, ((undef) x $num);>>
=cut
*/
void
-Perl_av_unshift(pTHX_ AV *av, I32 num)
+Perl_av_unshift(pTHX_ AV *av, SSize_t num)
{
- dVAR;
- I32 i;
+ SSize_t i;
MAGIC* mg;
PERL_ARGS_ASSERT_AV_UNSHIFT;
}
if (num) {
SV **ary;
- const I32 i = AvFILLp(av);
+ const SSize_t i = AvFILLp(av);
/* Create extra elements */
- const I32 slide = i > 0 ? i : 0;
+ const SSize_t slide = i > 0 ? i : 0;
num += slide;
av_extend(av, i + num);
AvFILLp(av) += num;
ary = AvARRAY(av);
Move(ary, ary + num, i + 1, SV*);
do {
- ary[--num] = &PL_sv_undef;
+ ary[--num] = NULL;
} while (num);
/* Make extra elements into a buffer */
AvMAX(av) -= slide;
SV *
Perl_av_shift(pTHX_ AV *av)
{
- dVAR;
SV *retval;
MAGIC* mg;
return &PL_sv_undef;
retval = *AvARRAY(av);
if (AvREAL(av))
- *AvARRAY(av) = &PL_sv_undef;
+ *AvARRAY(av) = NULL;
AvARRAY(av) = AvARRAY(av) + 1;
AvMAX(av)--;
AvFILLp(av)--;
if (SvSMAGICAL(av))
mg_set(MUTABLE_SV(av));
- return retval;
+ return retval ? retval : &PL_sv_undef;
}
/*
=for apidoc av_top_index
Returns the highest index in the array. The number of elements in the
-array is C<av_top_index(av) + 1>. Returns -1 if the array is empty.
+array is S<C<av_top_index(av) + 1>>. Returns -1 if the array is empty.
The Perl equivalent for this is C<$#myarray>.
=for apidoc av_len
-Same as L</av_top_index>. Returns the highest index in the array. Note that the
-return value is +1 what its name implies it returns; and hence differs in
-meaning from what the similarly named L</sv_len> returns.
+Same as L</av_top_index>. Note that, unlike what the name implies, it returns
+the highest index in the array, so to get the size of the array you need to use
+S<C<av_len(av) + 1>>. This is unlike L</sv_len>, which returns what you would
+expect.
=cut
*/
-I32
+SSize_t
Perl_av_len(pTHX_ AV *av)
{
PERL_ARGS_ASSERT_AV_LEN;
=for apidoc av_fill
Set the highest index in the array to the given number, equivalent to
-Perl's C<$#array = $fill;>.
+Perl's S<C<$#array = $fill;>>.
-The number of elements in the an array will be C<fill + 1> after
-av_fill() returns. If the array was previously shorter, then the
-additional elements appended are set to C<PL_sv_undef>. If the array
-was longer, then the excess elements are freed. C<av_fill(av, -1)> is
+The number of elements in the array will be S<C<fill + 1>> after
+C<av_fill()> returns. If the array was previously shorter, then the
+additional elements appended are set to NULL. If the array
+was longer, then the excess elements are freed. S<C<av_fill(av, -1)>> is
the same as C<av_clear(av)>.
=cut
*/
void
-Perl_av_fill(pTHX_ AV *av, I32 fill)
+Perl_av_fill(pTHX_ AV *av, SSize_t fill)
{
- dVAR;
MAGIC *mg;
PERL_ARGS_ASSERT_AV_FILL;
return;
}
if (fill <= AvMAX(av)) {
- I32 key = AvFILLp(av);
+ SSize_t key = AvFILLp(av);
SV** const ary = AvARRAY(av);
if (AvREAL(av)) {
while (key > fill) {
SvREFCNT_dec(ary[key]);
- ary[key--] = &PL_sv_undef;
+ ary[key--] = NULL;
}
}
else {
while (key < fill)
- ary[++key] = &PL_sv_undef;
+ ary[++key] = NULL;
}
AvFILLp(av) = fill;
mg_set(MUTABLE_SV(av));
}
else
- (void)av_store(av,fill,&PL_sv_undef);
+ (void)av_store(av,fill,NULL);
}
/*
=for apidoc av_delete
-Deletes the element indexed by C<key> from the array, makes the element mortal,
-and returns it. If C<flags> equals C<G_DISCARD>, the element is freed and null
-is returned. Perl equivalent: C<my $elem = delete($myarray[$idx]);> for the
-non-C<G_DISCARD> version and a void-context C<delete($myarray[$idx]);> for the
-C<G_DISCARD> version.
+Deletes the element indexed by C<key> from the array, makes the element
+mortal, and returns it. If C<flags> equals C<G_DISCARD>, the element is
+freed and NULL is returned. NULL is also returned if C<key> is out of
+range.
+
+Perl equivalent: S<C<splice(@myarray, $key, 1, undef)>> (with the
+C<splice> in void context if C<G_DISCARD> is present).
=cut
*/
SV *
-Perl_av_delete(pTHX_ AV *av, I32 key, I32 flags)
+Perl_av_delete(pTHX_ AV *av, SSize_t key, I32 flags)
{
- dVAR;
SV *sv;
PERL_ARGS_ASSERT_AV_DELETE;
if (!AvREAL(av) && AvREIFY(av))
av_reify(av);
sv = AvARRAY(av)[key];
+ AvARRAY(av)[key] = NULL;
if (key == AvFILLp(av)) {
- AvARRAY(av)[key] = &PL_sv_undef;
do {
AvFILLp(av)--;
- } while (--key >= 0 && AvARRAY(av)[key] == &PL_sv_undef);
+ } while (--key >= 0 && !AvARRAY(av)[key]);
}
- else
- AvARRAY(av)[key] = &PL_sv_undef;
if (SvSMAGICAL(av))
mg_set(MUTABLE_SV(av));
}
- if (flags & G_DISCARD) {
- SvREFCNT_dec(sv);
- sv = NULL;
+ if(sv != NULL) {
+ if (flags & G_DISCARD) {
+ SvREFCNT_dec_NN(sv);
+ return NULL;
+ }
+ else if (AvREAL(av))
+ sv_2mortal(sv);
}
- else if (AvREAL(av))
- sv = sv_2mortal(sv);
return sv;
}
Returns true if the element indexed by C<key> has been initialized.
This relies on the fact that uninitialized array elements are set to
-C<&PL_sv_undef>.
+C<NULL>.
Perl equivalent: C<exists($myarray[$key])>.
=cut
*/
bool
-Perl_av_exists(pTHX_ AV *av, I32 key)
+Perl_av_exists(pTHX_ AV *av, SSize_t key)
{
- dVAR;
PERL_ARGS_ASSERT_AV_EXISTS;
assert(SvTYPE(av) == SVt_PVAV);
return FALSE;
}
- if (key <= AvFILLp(av) && AvARRAY(av)[key] != &PL_sv_undef
- && AvARRAY(av)[key])
+ if (key <= AvFILLp(av) && AvARRAY(av)[key])
{
return TRUE;
}
static MAGIC *
S_get_aux_mg(pTHX_ AV *av) {
- dVAR;
MAGIC *mg;
PERL_ARGS_ASSERT_GET_AUX_MG;
PERL_ARGS_ASSERT_AV_ITER_P;
assert(SvTYPE(av) == SVt_PVAV);
-#if IVSIZE == I32SIZE
- return (IV *)&(mg->mg_len);
-#else
- if (!mg->mg_ptr) {
- IV *temp;
- mg->mg_len = IVSIZE;
- Newxz(temp, 1, IV);
- mg->mg_ptr = (char *) temp;
+ if (sizeof(IV) == sizeof(SSize_t)) {
+ return (IV *)&(mg->mg_len);
+ } else {
+ if (!mg->mg_ptr) {
+ IV *temp;
+ mg->mg_len = IVSIZE;
+ Newxz(temp, 1, IV);
+ mg->mg_ptr = (char *) temp;
+ }
+ return (IV *)mg->mg_ptr;
}
- return (IV *)mg->mg_ptr;
-#endif
}
/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- *
* ex: set ts=8 sts=4 sw=4 et:
*/
https://perl5.git.perl.org / perl5.git / blobdiff