-# Makefile to build perl on Windowns NT using Microsoft NMAKE.
-# Works with MS command line compilers from VC++ etc.
+#
+# Makefile to build perl on Windows NT using Microsoft NMAKE.
#
# This is set up to build a perl.exe that runs off a shared library
# (perl.dll). Also makes individual DLLs for the XS extensions.
-# NB: Miniperl has a different set of objects it depends on than
-# perl.exe
-# Also, Miniperl will not build with -DPERL_OBJECT defined
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
#
# Set these to wherever you want "nmake install" to put your
# newly built perl.
+#
INST_DRV = c:
-INST_TOP = $(INST_DRV)\perl5004.5x
+INST_TOP = $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location. Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to. If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER = \5.00561
#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components. This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files. Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location. Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH = \$(ARCHNAME)
+
+#
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
# uncomment to enable threads-capabilities
+#
#USE_THREADS = define
#
-# uncomment next line if you are using Visual C++ 2.x
-#CCTYPE = MSVC20
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
+# uncomment to enable multiple interpreters
+#
+#USE_MULTI = define
#
+# XXX WARNING! This option currently undergoing changes. May be broken.
+#
# uncomment next line if you want to use the perl object
-OBJECT = -DPERL_OBJECT
+# Currently, this cannot be enabled if you ask for threads above
+#
+#USE_OBJECT = define
+
+#
+# uncomment one of the following lines if you are using either
+# Visual C++ 2.x or Visual C++ 6.x (aka Visual Studio 98)
+#
+#CCTYPE = MSVC20
+#CCTYPE = MSVC60
#
# uncomment next line if you want debug version of perl (big,slow)
+#
#CFG = Debug
#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# Highly recommended. It has patches that fix known bugs in MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+#USE_PERLCRT = define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV = define
+
+#
# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located at the perl
-# top level directory.
-#CRYPT_SRC = des_fcrypt.c
+# file exists (see README.win32). File should be located in the same
+# directory as this file.
+#
+#CRYPT_SRC = fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
# library, uncomment this, and make sure the library exists (see README.win32)
# Specify the full pathname of the library.
-#CRYPT_LIB = des_fcrypt.lib
+#
+#CRYPT_LIB = fcrypt.lib
#
# set this if you wish to use perl's malloc
# WARNING: Turning this on/off WILL break binary compatibility with extensions
-# you may have compiled with/without it. Be prepared to recompile all extensions
-# if you change the default.
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for USE_OBJECT above.
+#
#PERL_MALLOC = define
#
# set the install locations of the compiler include/libraries
-# (you'll need to quote the value if it contains spaces: i.e.
-# CCHOME = "f:\Program Files\vc"
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
#
#CCHOME = f:\msvc20
CCHOME = $(MSVCDIR)
CCLIBDIR = $(CCHOME)\lib
#
+# additional compiler flags can be specified here.
+#
+# Adding -DPERL_POLLUTE enables support for old symbols, at the expense of
+# extreme pollution. You most probably want this if you're compiling modules
+# from CPAN, or other such serious uses of this experimental perl release.
+# We don't enable this by default because we want the modules to get fixed
+# instead of clinging to shortcuts like this one.
+#
+#BUILDOPT = $(BUILDOPT) -DPERL_POLLUTE
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS =
+
+#
# set this to your email address (perl will guess a value from
# from your loginname and your hostname, which may not be right)
+#
#EMAIL =
+##
+## Build configuration ends.
+##
+
##################### CHANGE THESE ONLY IF YOU MUST #####################
!IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
CRYPT_FLAG = -DHAVE_DES_FCRYPT
!ENDIF
-!IF "$(OBJECT)" != ""
+!IF "$(USE_OBJECT)" == "define"
PERL_MALLOC = undef
+USE_THREADS = undef
+USE_MULTI = undef
!ENDIF
!IF "$(PERL_MALLOC)" == ""
USE_THREADS = undef
!ENDIF
-#BUILDOPT = -DMULTIPLICITY
-#BUILDOPT = -DPERL_GLOBAL_STRUCT -DMULTIPLICITY
-# -DUSE_PERLIO -D__STDC__=1 -DUSE_SFIO -DI_SFIO -I\sfio97\include
+!IF "$(USE_MULTI)" == ""
+USE_MULTI = undef
+!ENDIF
+
+!IF "$(USE_OBJECT)" == ""
+USE_OBJECT = undef
+!ENDIF
+
+!IF "$(USE_MULTI)$(USE_THREADS)$(USE_OBJECT)" != "undefundefundef"
+BUILDOPT = $(BUILDOPT) -DPERL_IMPLICIT_CONTEXT
+!ENDIF
!IF "$(PROCESSOR_ARCHITECTURE)" == ""
PROCESSOR_ARCHITECTURE = x86
!ENDIF
+!IF "$(USE_OBJECT)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
+!ELSE
!IF "$(USE_THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
!ELSE
+!IF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+!ELSE
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
!ENDIF
+!ENDIF
+!ENDIF
+
+# Visual Studio 98 specific
+!IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand. Makes the test suite
+# run in about 10% less time.
+DELAYLOAD = -DELAYLOAD:wsock32.dll delayimp.lib
+
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled. Anything earlier fails tests.
+!IF "$(CFG)" == ""
+CFG = Optimize
+!ENDIF
+!ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
+INST_COREDIR = $(INST_ARCHLIB)\CORE
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_POD)\html
#
# Programs to compile, build .lib files and link
#
-CC = cl.exe
-LINK32 = link.exe
+CC = cl
+LINK32 = link
LIB32 = $(LINK32) -lib
#
# Options
#
-!IF "$(OBJECT)" == "-DPERL_OBJECT"
-RUNTIME = -MT
-# XXX building with -MD fails many tests, but cannot investigate
-# because building with debug crashes compiler :-( GSAR )-:
-#RUNTIME = -MD
-!ELSE
-RUNTIME = -MD
-!ENDIF
-INCLUDES = -I.\include -I. -I..
+RUNTIME = -MD
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
-DEFINES = -DWIN32 -D_CONSOLE $(BUILDOPT) $(CRYPT_FLAG)
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -GX
+!IF "$(USE_PERLCRT)" == ""
+! IF "$(CFG)" == "Debug"
+PERLCRTLIBC = msvcrtd.lib
+! ELSE
+PERLCRTLIBC = msvcrt.lib
+! ENDIF
+!ELSE
+! IF "$(CFG)" == "Debug"
+PERLCRTLIBC = PerlCRTD.lib
+! ELSE
+PERLCRTLIBC = PerlCRT.lib
+! ENDIF
+!ENDIF
+
!IF "$(RUNTIME)" == "-MD"
-LIBC = msvcrt.lib
+LIBC = $(PERLCRTLIBC)
!ELSE
LIBC = libcmt.lib
!ENDIF
! ENDIF
LINK_DBG = -debug -pdb:none
!ELSE
-! IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+! IF "$(CFG)" == "Optimize"
+# -O1 yields smaller code, which turns out to be faster than -O2
+#OPTIMIZE = -O2 $(RUNTIME) -DNDEBUG
+OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
! ELSE
OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
! ENDIF
LINK_DBG = -release
!ENDIF
-!IF "$(OBJECT)" != ""
+!IF "$(USE_OBJECT)" == "define"
OPTIMIZE = $(OPTIMIZE) $(CXX_FLAG)
+BUILDOPT = $(BUILDOPT) -DPERL_OBJECT
!ENDIF
-# we don't add LIBC here, the compiler does it based on -MD/-MT
-LIBFILES = $(CRYPT_LIB) oldnames.lib kernel32.lib user32.lib gdi32.lib \
+LIBBASEFILES = $(DELAYLOAD) $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib \
winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
+ -libpath:"$(INST_COREDIR)" \
+ -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
-CFLAGS_O = $(CFLAGS) $(OBJECT)
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
-out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
#
-INST_BIN = $(INST_TOP)\bin
-INST_LIB = $(INST_TOP)\lib
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\extutils
-
-#
# various targets
-!IF "$(OBJECT)" == "-DPERL_OBJECT"
-PERLIMPLIB = ..\perlcore.lib
-PERLDLL = ..\perlcore.dll
-CAPILIB = $(COREDIR)\PerlCAPI.lib
+!IF "$(USE_OBJECT)" == "define"
+PERLIMPLIB = ..\perl56.lib
+PERLDLL = ..\perl56.dll
!ELSE
PERLIMPLIB = ..\perl.lib
PERLDLL = ..\perl.dll
-CAPILIB =
!ENDIF
MINIPERL = ..\miniperl.exe
PL2BAT = bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\dprofpp \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\pstruct \
+ ..\utils\perlcc \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\pod\pod2usage \
+ ..\pod\podchecker \
+ ..\pod\podselect \
+ ..\x2p\find2perl \
+ ..\x2p\s2p \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
+
MAKE = nmake -nologo
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
+
+!IF "$(USE_PERLCRT)" == ""
PERL95EXE = ..\perl95.exe
+!ENDIF
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
-C++ -prototypes
-CORE_SRC = \
+MICROCORE_SRC = \
..\av.c \
- ..\byterun.c \
..\deb.c \
..\doio.c \
..\doop.c \
..\mg.c \
..\op.c \
..\perl.c \
+ ..\perlapi.c \
..\perly.c \
..\pp.c \
..\pp_ctl.c \
..\taint.c \
..\toke.c \
..\universal.c \
- ..\util.c
+ ..\utf8.c \
+ ..\util.c \
+ ..\xsutils.c
-!IF "$(CRYPT_SRC)" != ""
-CORE_SRC = $(CORE_SRC) ..\$(CRYPT_SRC)
-!ENDIF
+EXTRACORE_SRC = $(EXTRACORE_SRC) perllib.c
!IF "$(PERL_MALLOC)" == "define"
-CORE_SRC = $(CORE_SRC) ..\malloc.c
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\malloc.c
!ENDIF
-!IF "$(OBJECT)" == ""
-CORE_SRC = $(CORE_SRC) ..\perlio.c
+!IF "$(USE_OBJECT)" != "define"
+EXTRACORE_SRC = $(EXTRACORE_SRC) ..\perlio.c
!ENDIF
WIN32_SRC = \
WIN32_SRC = $(WIN32_SRC) .\win32thread.c
!ENDIF
+!IF "$(CRYPT_SRC)" != ""
+WIN32_SRC = $(WIN32_SRC) .\$(CRYPT_SRC)
+!ENDIF
+
PERL95_SRC = \
perl95.c \
win32mt.c \
win32sckmt.c
!IF "$(CRYPT_SRC)" != ""
-PERL95_SRC = $(PERL95_SRC) ..\$(CRYPT_SRC)
+PERL95_SRC = $(PERL95_SRC) .\$(CRYPT_SRC)
!ENDIF
DLL_SRC = $(DYNALOADER).c
-
-!IF "$(OBJECT)" == ""
-DLL_SRC = $(DLL_SRC) perllib.c
-!ENDIF
-
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
..\x2p\util.c \
..\x2p\walk.c
-CORE_H = \
+CORE_NOCFG_H = \
..\av.h \
- ..\byterun.h \
- ..\bytecode.h \
..\cop.h \
..\cv.h \
..\dosish.h \
..\gv.h \
..\handy.h \
..\hv.h \
+ ..\iperlsys.h \
..\mg.h \
..\nostdio.h \
..\op.h \
..\opcode.h \
..\perl.h \
- ..\perlio.h \
+ ..\perlapi.h \
..\perlsdio.h \
..\perlsfio.h \
..\perly.h \
..\sv.h \
..\thread.h \
..\unixish.h \
+ ..\utf8.h \
..\util.h \
+ ..\warning.h \
..\XSUB.h \
- .\config.h \
..\EXTERN.h \
..\perlvars.h \
..\intrpvar.h \
.\include\sys\socket.h \
.\win32.h
-CORE_OBJ = $(CORE_SRC:.c=.obj)
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:.c=.obj)
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:.c=.obj)
WIN32_OBJ = $(WIN32_SRC:.c=.obj)
-MINICORE_OBJ = $(CORE_OBJ:..\=.\mini\) $(MINIDIR)\miniperlmain$(o)
+MINICORE_OBJ = $(MICROCORE_OBJ:..\=.\mini\) \
+ $(MINIDIR)\miniperlmain$(o) \
+ $(MINIDIR)\perlio$(o)
MINIWIN32_OBJ = $(WIN32_OBJ:.\=.\mini\)
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-PERL95_OBJ = $(PERL95_SRC:.c=.obj) DynaLoadmt$(o)
+PERL95_OBJ = $(PERL95_SRC:.c=.obj)
DLL_OBJ = $(DLL_SRC:.c=.obj)
X2P_OBJ = $(X2P_SRC:.c=.obj)
-!IF "$(OBJECT)" != ""
-MINICORE_OBJ = $(MINICORE_OBJ) $(MINIDIR)\perlio$(o)
-!ENDIF
-
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
-!IF "$(OBJECT)" == ""
PERLDLL_OBJ = $(PERLDLL_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
-!ELSE
-PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERLEXE_OBJ = $(PERLEXE_OBJ) $(WIN32_OBJ) $(DLL_OBJ)
+#PERL95_OBJ = $(PERL95_OBJ) DynaLoadmt$(o)
+
+!IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
!ENDIF
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf
STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
SOCKET = $(EXTDIR)\Socket\Socket
ATTRS = $(EXTDIR)\attrs\attrs
THREAD = $(EXTDIR)\Thread\Thread
B = $(EXTDIR)\B\B
+RE = $(EXTDIR)\re\re
+DUMPER = $(EXTDIR)\Data\Dumper\Dumper
+ERRNO = $(EXTDIR)\Errno\Errno
+PEEK = $(EXTDIR)\Devel\Peek\Peek
+BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
+DPROF = $(EXTDIR)\Devel\DProf\DProf
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
ATTRS_DLL = $(AUTODIR)\attrs\attrs.dll
THREAD_DLL = $(AUTODIR)\Thread\Thread.dll
B_DLL = $(AUTODIR)\B\B.dll
+DUMPER_DLL = $(AUTODIR)\Data\Dumper\Dumper.dll
+PEEK_DLL = $(AUTODIR)\Devel\Peek\Peek.dll
+RE_DLL = $(AUTODIR)\re\re.dll
+BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
+DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+
+ERRNO_PM = $(LIBDIR)\Errno.pm
EXTENSION_C = \
$(SOCKET).c \
$(POSIX).c \
$(ATTRS).c \
$(THREAD).c \
- $(B).c
+ $(RE).c \
+ $(DUMPER).c \
+ $(PEEK).c \
+ $(B).c \
+ $(BYTELOADER).c \
+ $(DPROF).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(SDBM_FILE_DLL)\
$(IO_DLL) \
$(POSIX_DLL) \
- $(ATTRS_DLL)
-# $(THREAD_DLL) \
-# $(B_DLL)
+ $(ATTRS_DLL) \
+ $(DUMPER_DLL) \
+ $(PEEK_DLL) \
+ $(B_DLL) \
+ $(RE_DLL) \
+ $(THREAD_DLL) \
+ $(BYTELOADER_DLL) \
+ $(DPROF_DLL)
+
+EXTENSION_PM = \
+ $(ERRNO_PM)
POD2HTML = $(PODDIR)\pod2html
POD2MAN = $(PODDIR)\pod2man
CFG_VARS = \
"INST_DRV=$(INST_DRV)" \
"INST_TOP=$(INST_TOP)" \
+ "INST_VER=$(INST_VER)" \
+ "INST_ARCH=$(INST_ARCH)" \
"archname=$(ARCHNAME)" \
"cc=$(CC)" \
- "ccflags=$(OPTIMIZE) $(DEFINES) $(OBJECT)" \
+ "ccflags=$(OPTIMIZE:"=\") $(DEFINES) $(BUILDOPT)" \
"cf_email=$(EMAIL)" \
"d_crypt=$(D_CRYPT)" \
"d_mymalloc=$(PERL_MALLOC)" \
"libs=$(LIBFILES)" \
- "incpath=$(CCINCDIR)" \
- "libperl=$(PERLIMPLIB)" \
- "libpth=$(CCLIBDIR)" \
+ "incpath=$(CCINCDIR:"=\")" \
+ "libperl=$(PERLIMPLIB:..\=)" \
+ "libpth=$(CCLIBDIR:"=\");$(EXTRALIBDIRS:"=\")" \
"libc=$(LIBC)" \
"make=nmake" \
"static_ext=$(STATIC_EXT)" \
"dynamic_ext=$(DYNAMIC_EXT)" \
+ "nonxs_ext=$(NONXS_EXT)" \
"usethreads=$(USE_THREADS)" \
- "LINK_FLAGS=$(LINK_FLAGS)" \
- "optimize=$(OPTIMIZE)"
+ "usemultiplicity=$(USE_MULTI)" \
+ "LINK_FLAGS=$(LINK_FLAGS:"=\")" \
+ "optimize=$(OPTIMIZE:"=\")"
#
# Top targets
#
-all : $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) $(CAPILIB) $(X2P) \
- $(EXTENSION_DLL)
+all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
+ $(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
perl configpm
cd win32
-del /f $(CFGH_TMPL)
- -mkdir ..\lib\CORE
- -perl -I..\lib config_h.PL
+ -mkdir $(COREDIR)
+ -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL || $(MAKE) $(MAKEFLAGS) $(CONFIGPM)
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ || $(MAKE) /$(MAKEFLAGS) $(CONFIGPM)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
$(LINK32) -subsystem:console -out:$@ @<<
$(MINIDIR) :
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
-$(MINICORE_OBJ) : $(CORE_H)
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ ..\$(*F).c
-$(MINIWIN32_OBJ) : $(CORE_H)
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*F).c
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
+
$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ) : $(CORE_H)
-$(MINI_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
$(PERL95_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym makedef.pl
- $(MINIPERL) -w makedef.pl $(OPTIMIZE) $(DEFINES) $(OBJECT) \
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ)
<<
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
-perl.def : $(MINIPERL) makeperldef.pl
- $(MINIPERL) -I..\lib makeperldef.pl $(NULL) > perl.def
-
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
copy runperl.c perlmain.c
perlmain$(o) : perlmain.c
- $(CC) $(CFLAGS_O) -UPERLDLL $(EXEOUT_FLAG)$@ -c perlmain.c
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ)
$(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
- $(PERLEXE_OBJ) $(PERLIMPLIB)
+ $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB)
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+!IF "$(USE_PERLCRT)" == ""
+
perl95.c : runperl.c
copy runperl.c perl95.c
$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
$(LINK32) -subsystem:console -nodefaultlib -out:$@ $(LINK_FLAGS) \
- $(LIBFILES) $(PERL95_OBJ) $(PERLIMPLIB) libcmt.lib
+ $(LIBBASEFILES) $(PERL95_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) \
+ libcmt.lib
+
+!ENDIF
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
cd $(EXTDIR)\$(*B)
- ..\$(MINIPERL) -I..\..\lib $(*B).pm.PL
+ ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
cd ..\..\win32
$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
cd $(EXTDIR)\$(*B)
$(XSUBPP) dl_win32.xs > $(*B).c
cd ..\..\win32
-!IF "$(OBJECT)" == "-DPERL_OBJECT"
-PerlCAPI.cpp : $(MINIPERL)
- $(MINIPERL) GenCAPI.pl $(COREDIR)
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-PerlCAPI$(o) : PerlCAPI.cpp
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)PerlCAPI$(o) PerlCAPI.cpp
+$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+ cd $(EXTDIR)\Data\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
-$(CAPILIB) : PerlCAPI.cpp PerlCAPI$(o)
- lib /OUT:$(CAPILIB) PerlCAPI$(o)
-!ENDIF
+$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
+ cd $(EXTDIR)\Devel\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
+ cd $(EXTDIR)\Devel\$(*B)
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\..\win32
+
+$(RE_DLL): $(PERLEXE) $(RE).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
$(B_DLL): $(PERLEXE) $(B).xs
cd $(EXTDIR)\$(*B)
$(MAKE)
cd ..\..\win32
+$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
+$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+ cd $(EXTDIR)\$(*B)
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ $(MAKE)
+ cd ..\..\win32
+
doc: $(PERLEXE)
- cd ..\pod
- $(MAKE) -f ..\win32\pod.mak checkpods pod2html pod2latex \
- pod2man pod2text
- $(XCOPY) *.bat ..\win32\bin\*.*
- cd ..\win32
- copy ..\README.win32 ..\pod\perlwin32.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML::=|)" \
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
-utils: $(PERLEXE)
+utils: $(PERLEXE) $(X2P)
cd ..\utils
$(MAKE) PERL=$(MINIPERL)
- $(PERLEXE) -I..\lib ..\win32\$(PL2BAT) h2ph splain perlbug pl2pm c2ph
- $(PERLEXE) ..\win32\$(PL2BAT) h2xs perldoc pstruct
- $(XCOPY) *.bat ..\win32\bin\*.*
+ cd ..\pod
+ copy ..\README.win32 .\perlwin32.pod
+ $(MAKE) -f ..\win32\pod.mak converters
cd ..\win32
- $(PERLEXE) $(PL2BAT) bin\network.pl bin\www.pl bin\runperl.pl \
- bin\pl2bat.pl bin\perlglob.pl
+ $(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean
-del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl.lib $(MINIMOD)
-del /f *.def *.map
- -del /f $(EXTENSION_DLL)
- -del /f $(EXTENSION_C) $(DYNALOADER).c
+ -del /f $(EXTENSION_DLL) $(EXTENSION_PM)
+ -del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
-rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
-rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
cd ..\utils
- -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc pstruct
+ -del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc pstruct dprofpp
-del /f *.bat
cd ..\win32
cd ..\x2p
-del /f perl95.c
-del /f bin\*.bat
cd $(EXTDIR)
- -del /s *.lib *.def *.map *.bs Makefile *$(o) pm_to_blib
+ -del /s *.lib *.def *.map *.pdb *.bs Makefile *$(o) pm_to_blib
cd ..\win32
-rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
-rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
-install : all installbare installutils installhtml
+install : all installbare installhtml
-installbare :
+installbare : utils
$(PERLEXE) ..\installperl
+!IF "$(USE_PERLCRT)" == ""
$(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
-
-installutils : utils
+!ENDIF
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
- $(XCOPY) bin\*.bat $(INST_BIN)\*.*
- $(XCOPY) ..\pod\*.bat $(INST_BIN)\*.*
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(RCOPY) html\*.* $(INST_HTML)\*.*
-@erase perlmain$(o)
-@erase config.w32
-@erase /f config.h
- -@erase PerlCAPI.cpp
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -@erase $(CAPILIB)
-rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
- -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp
+ -@erase ..\*$(o) ..\*.lib ..\*.exp *$(o) *.lib *.exp *.res
-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
https://perl5.git.perl.org / perl5.git / blobdiff