(int)offset, RExC_precomp, RExC_precomp + offset); \
} STMT_END
-#define ckWARN2regdep(loc,m, a1) STMT_START { \
+#define ckWARN2reg_d(loc,m, a1) STMT_START { \
const IV offset = loc - RExC_precomp; \
- Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_REGEXP), \
m REPORT_LOCATION, \
a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
} STMT_END
}
/* These two functions currently do the exact same thing */
-#define cl_init_zero S_cl_init
+#define cl_init_zero cl_init
/* 'AND' a given class with another one. Can create false positives. 'cl'
* should not be inverted. 'and_with->flags & ANYOF_CLASS' should be 0 if
&& data.last_start_min == 0 && data.last_end > 0
&& !RExC_seen_zerolen
&& !(RExC_seen & REG_SEEN_VERBARG)
- && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
+ && !((RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
r->extflags |= RXf_CHECK_ALL;
scan_commit(pRExC_state, &data,&minlen,0);
r->check_offset_min = r->float_min_offset;
r->check_offset_max = r->float_max_offset;
}
- /* XXXX Currently intuiting is not compatible with ANCH_GPOS.
- This should be changed ASAP! */
- if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) {
+ if ((r->check_substr || r->check_utf8) ) {
r->extflags |= RXf_USE_INTUIT;
if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8))
r->extflags |= RXf_INTUIT_TAIL;
/* This section of code defines the inversion list object and its methods. The
* interfaces are highly subject to change, so as much as possible is static to
* this file. An inversion list is here implemented as a malloc'd C UV array
- * with some added info that is placed as UVs at the beginning in a header
- * portion. Currently it is a SVt_PVLV, with some of the header fields from
- * that repurposed for uses here.
+ * as an SVt_INVLIST scalar.
*
* An inversion list for Unicode is an array of code points, sorted by ordinal
* number. The zeroth element is the first code point in the list. The 1th
* list.)
* Taking the complement (inverting) an inversion list is quite simple, if the
* first element is 0, remove it; otherwise add a 0 element at the beginning.
- * This implementation reserves an element (considered to be the final element
- * of the header) at the beginning of each inversion list to always contain 0;
- * there is an additional flag in the header which indicates if the list begins
- * at the 0, or is offset to begin at the next element.
+ * This implementation reserves an element at the beginning of each inversion
+ * list to always contain 0; there is an additional flag in the header which
+ * indicates if the list begins at the 0, or is offset to begin at the next
+ * element.
*
* More about inversion lists can be found in "Unicode Demystified"
* Chapter 13 by Richard Gillam, published by Addison-Wesley.
* should eventually be made public */
/* The header definitions are in F<inline_invlist.c> */
-#define TO_INTERNAL_SIZE(x) (((x) + HEADER_LENGTH) * sizeof(UV))
-#define FROM_INTERNAL_SIZE(x) (((x)/ sizeof(UV)) - HEADER_LENGTH)
-
-#define INVLIST_INITIAL_LEN 10
PERL_STATIC_INLINE UV*
S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0)
* array begins depends on whether the list has the code point U+0000 in it
* or not. The other parameter tells it whether the code that follows this
* call is about to put a 0 in the inversion list or not. The first
- * element is either the final part of the header reserved for 0, if TRUE,
- * or the first element of the non-heading part, if FALSE */
+ * element is either the element reserved for 0, if TRUE, or the element
+ * after it, if FALSE */
- UV* zero = get_invlist_zero_addr(invlist);
+ bool* offset = get_invlist_offset_addr(invlist);
+ UV* zero_addr = (UV *) SvPVX(invlist);
PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT;
/* Must be empty */
- assert(! *_get_invlist_len_addr(invlist));
+ assert(! _invlist_len(invlist));
+
+ *zero_addr = 0;
/* 1^1 = 0; 1^0 = 1 */
- *zero = 1 ^ will_have_0;
- *(zero + 1) = 0;
- return 1 + zero + *zero;
+ *offset = 1 ^ will_have_0;
+ return zero_addr + *offset;
}
PERL_STATIC_INLINE UV*
/* Must not be empty. If these fail, you probably didn't check for <len>
* being non-zero before trying to get the array */
- assert(*_get_invlist_len_addr(invlist));
- assert(*get_invlist_zero_addr(invlist) == 0
- || *get_invlist_zero_addr(invlist) == 1);
-
- /* The array begins either at the header element reserved for zero or the
- * element after that. The reserved element is 1 past the zero_addr
- * element; the latter contains 0 or 1 to indicate how much additionally to
- * add */
- assert(0 == *(1 + get_invlist_zero_addr(invlist)));
- return (UV *) (1 + get_invlist_zero_addr(invlist)
- + *get_invlist_zero_addr(invlist));
+ assert(_invlist_len(invlist));
+
+ /* The very first element always contains zero, The array begins either
+ * there, or if the inversion list is offset, at the element after it.
+ * The offset header field determines which; it contains 0 or 1 to indicate
+ * how much additionally to add */
+ assert(0 == *(SvPVX(invlist)));
+ return ((UV *) SvPVX(invlist) + *get_invlist_offset_addr(invlist));
}
PERL_STATIC_INLINE void
-S_invlist_set_len(pTHX_ SV* const invlist, const UV len)
+S_invlist_set_len(pTHX_ SV* const invlist, const UV len, const bool offset)
{
- /* Sets the current number of elements stored in the inversion list */
+ /* Sets the current number of elements stored in the inversion list.
+ * Updates SvCUR correspondingly */
PERL_ARGS_ASSERT_INVLIST_SET_LEN;
- *_get_invlist_len_addr(invlist) = len;
-
- assert(SvLEN(invlist) == 0 || len <= SvLEN(invlist));
+ assert(SvTYPE(invlist) == SVt_INVLIST);
- SvCUR_set(invlist, TO_INTERNAL_SIZE(len));
- /* Note that when inverting, SvCUR shouldn't change */
+ SvCUR_set(invlist,
+ (len == 0)
+ ? 0
+ : TO_INTERNAL_SIZE(len + offset));
+ assert(SvLEN(invlist) == 0 || SvCUR(invlist) <= SvLEN(invlist));
}
PERL_STATIC_INLINE IV*
S_get_invlist_previous_index_addr(pTHX_ SV* invlist)
{
- /* Return the address of the UV that is reserved to hold the cached index
+ /* Return the address of the IV that is reserved to hold the cached index
* */
PERL_ARGS_ASSERT_GET_INVLIST_PREVIOUS_INDEX_ADDR;
- return (IV *) (SvPVX(invlist) + (INVLIST_PREVIOUS_INDEX_OFFSET * sizeof (UV)));
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
+ return &(((XINVLIST*) SvANY(invlist))->prev_index);
}
PERL_STATIC_INLINE IV
PERL_ARGS_ASSERT_INVLIST_MAX;
- return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
- ? _invlist_len(invlist)
- : FROM_INTERNAL_SIZE(SvLEN(invlist));
-}
+ assert(SvTYPE(invlist) == SVt_INVLIST);
-PERL_STATIC_INLINE UV*
-S_get_invlist_zero_addr(pTHX_ SV* invlist)
-{
- /* Return the address of the UV that says whether the inversion list is
- * offset (it contains 1) or not (contains 0) */
-
- PERL_ARGS_ASSERT_GET_INVLIST_ZERO_ADDR;
-
- return (UV *) (SvPVX(invlist) + (INVLIST_ZERO_OFFSET * sizeof (UV)));
+ /* Assumes worst case, in which the 0 element is not counted in the
+ * inversion list, so subtracts 1 for that */
+ return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
+ ? FROM_INTERNAL_SIZE(SvCUR(invlist)) - 1
+ : FROM_INTERNAL_SIZE(SvLEN(invlist)) - 1;
}
#ifndef PERL_IN_XSUB_RE
* system default is used instead */
SV* new_list;
- UV* zero_addr;
if (initial_size < 0) {
- initial_size = INVLIST_INITIAL_LEN;
+ initial_size = 10;
}
/* Allocate the initial space */
- new_list = newSV_type(SVt_PVLV);
- SvGROW(new_list, TO_INTERNAL_SIZE(initial_size) + 1); /* 1 is for trailing
- NUL */
- invlist_set_len(new_list, 0);
+ new_list = newSV_type(SVt_INVLIST);
- /* Force iterinit() to be used to get iteration to work */
- *get_invlist_iter_addr(new_list) = UV_MAX;
+ /* First 1 is in case the zero element isn't in the list; second 1 is for
+ * trailing NUL */
+ SvGROW(new_list, TO_INTERNAL_SIZE(initial_size + 1) + 1);
+ invlist_set_len(new_list, 0, 0);
- /* This should force a segfault if a method doesn't initialize this
- * properly */
- zero_addr = get_invlist_zero_addr(new_list);
- *zero_addr = UV_MAX;
- *(zero_addr + 1) = 0;
+ /* Force iterinit() to be used to get iteration to work */
+ *get_invlist_iter_addr(new_list) = (STRLEN) UV_MAX;
*get_invlist_previous_index_addr(new_list) = 0;
- *get_invlist_version_id_addr(new_list) = INVLIST_VERSION_ID;
-#if HEADER_LENGTH != 6
-# error Need to regenerate INVLIST_VERSION_ID by running perl -E 'say int(rand 2**31-1)', and then changing the #if to the new length
-#endif
return new_list;
}
#endif
STATIC SV*
-S__new_invlist_C_array(pTHX_ UV* list)
+S__new_invlist_C_array(pTHX_ const UV* const list)
{
/* Return a pointer to a newly constructed inversion list, initialized to
* point to <list>, which has to be in the exact correct inversion list
* form, including internal fields. Thus this is a dangerous routine that
- * should not be used in the wrong hands */
+ * should not be used in the wrong hands. The passed in 'list' contains
+ * several header fields at the beginning that are not part of the
+ * inversion list body proper */
+
+ const STRLEN length = (STRLEN) list[0];
+ const UV version_id = list[1];
+ const bool offset = cBOOL(list[2]);
+#define HEADER_LENGTH 3
+ /* If any of the above changes in any way, you must change HEADER_LENGTH
+ * (if appropriate) and regenerate INVLIST_VERSION_ID by running
+ * perl -E 'say int(rand 2**31-1)'
+ */
+#define INVLIST_VERSION_ID 148565664 /* This is a combination of a version and
+ data structure type, so that one being
+ passed in can be validated to be an
+ inversion list of the correct vintage.
+ */
- SV* invlist = newSV_type(SVt_PVLV);
+ SV* invlist = newSV_type(SVt_INVLIST);
PERL_ARGS_ASSERT__NEW_INVLIST_C_ARRAY;
- SvPV_set(invlist, (char *) list);
+ if (version_id != INVLIST_VERSION_ID) {
+ Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
+ }
+
+ /* The generated array passed in includes header elements that aren't part
+ * of the list proper, so start it just after them */
+ SvPV_set(invlist, (char *) (list + HEADER_LENGTH));
+
SvLEN_set(invlist, 0); /* Means we own the contents, and the system
shouldn't touch it */
- SvCUR_set(invlist, TO_INTERNAL_SIZE(_invlist_len(invlist)));
- if (*get_invlist_version_id_addr(invlist) != INVLIST_VERSION_ID) {
- Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
- }
- invlist_set_len(invlist, list[INVLIST_LEN_OFFSET]);
+ *(get_invlist_offset_addr(invlist)) = offset;
- /* Initialize the iteration pointer.
- * XXX This could be done at compile time in charclass_invlists.h, but I
- * (khw) am not confident that the suffixes for specifying the C constant
- * UV_MAX are portable, e.g. 'ull' on a 32 bit machine that is configured
- * to use 64 bits; might need a Configure probe */
+ /* The 'length' passed to us is the physical number of elements in the
+ * inversion list. But if there is an offset the logical number is one
+ * less than that */
+ invlist_set_len(invlist, length - offset, offset);
+
+ invlist_set_previous_index(invlist, 0);
+
+ /* Initialize the iteration pointer. */
invlist_iterfinish(invlist);
return invlist;
PERL_ARGS_ASSERT_INVLIST_EXTEND;
- SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max));
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
+ /* Add one to account for the zero element at the beginning which may not
+ * be counted by the calling parameters */
+ SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max + 1));
}
PERL_STATIC_INLINE void
{
PERL_ARGS_ASSERT_INVLIST_TRIM;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
/* Change the length of the inversion list to how many entries it currently
* has */
-
SvPV_shrink_to_cur((SV *) invlist);
}
UV* array;
UV max = invlist_max(invlist);
UV len = _invlist_len(invlist);
+ bool offset;
PERL_ARGS_ASSERT__APPEND_RANGE_TO_INVLIST;
if (len == 0) { /* Empty lists must be initialized */
- array = _invlist_array_init(invlist, start == 0);
+ offset = start != 0;
+ array = _invlist_array_init(invlist, ! offset);
}
else {
/* Here, the existing list is non-empty. The current max entry in the
* value not in the set, it is extending the set, so the new first
* value not in the set is one greater than the newly extended range.
* */
+ offset = *get_invlist_offset_addr(invlist);
if (array[final_element] == start) {
if (end != UV_MAX) {
array[final_element] = end + 1;
else {
/* But if the end is the maximum representable on the machine,
* just let the range that this would extend to have no end */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, offset);
}
return;
}
len += 2; /* Includes an element each for the start and end of range */
- /* If overflows the existing space, extend, which may cause the array to be
- * moved */
+ /* If wll overflow the existing space, extend, which may cause the array to
+ * be moved */
if (max < len) {
invlist_extend(invlist, len);
- invlist_set_len(invlist, len); /* Have to set len here to avoid assert
- failure in invlist_array() */
+
+ /* Have to set len here to avoid assert failure in invlist_array() */
+ invlist_set_len(invlist, len, offset);
+
array = invlist_array(invlist);
}
else {
- invlist_set_len(invlist, len);
+ invlist_set_len(invlist, len, offset);
}
/* The next item on the list starts the range, the one after that is
else {
/* But if the end is the maximum representable on the machine, just let
* the range have no end */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, offset);
}
}
/* Set result to final length, which can change the pointer to array_u, so
* re-find it */
if (len_u != _invlist_len(u)) {
- invlist_set_len(u, len_u);
+ invlist_set_len(u, len_u, *get_invlist_offset_addr(u));
invlist_trim(u);
array_u = invlist_array(u);
}
assert(a != b);
/* Special case if either one is empty */
- len_a = _invlist_len(a);
+ len_a = (a == NULL) ? 0 : _invlist_len(a);
if ((len_a == 0) || ((len_b = _invlist_len(b)) == 0)) {
if (len_a != 0 && complement_b) {
* must be every possible code point. Thus the intersection is
* simply 'a'. */
if (*i != a) {
- *i = invlist_clone(a);
-
if (*i == b) {
SvREFCNT_dec_NN(b);
}
+
+ *i = invlist_clone(a);
}
/* else *i is already 'a' */
return;
/* Set result to final length, which can change the pointer to array_r, so
* re-find it */
if (len_r != _invlist_len(r)) {
- invlist_set_len(r, len_r);
+ invlist_set_len(r, len_r, *get_invlist_offset_addr(r));
invlist_trim(r);
array_r = invlist_array(r);
}
* have a zero; removes it otherwise. As described above, the data
* structure is set up so that this is very efficient */
- STRLEN* len_pos = _get_invlist_len_addr(invlist);
-
PERL_ARGS_ASSERT__INVLIST_INVERT;
assert(! invlist_is_iterating(invlist));
/* The inverse of matching nothing is matching everything */
- if (*len_pos == 0) {
+ if (_invlist_len(invlist) == 0) {
_append_range_to_invlist(invlist, 0, UV_MAX);
return;
}
- /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the
- * zero element was a 0, so it is being removed, so the length decrements
- * by 1; and vice-versa. SvCUR is unaffected */
- if (*get_invlist_zero_addr(invlist) ^= 1) {
- (*len_pos)--;
- }
- else {
- (*len_pos)++;
- }
+ *get_invlist_offset_addr(invlist) = ! *get_invlist_offset_addr(invlist);
}
void
invlist_extend(invlist, len);
array = invlist_array(invlist);
}
- invlist_set_len(invlist, len);
+ invlist_set_len(invlist, len, *get_invlist_offset_addr(invlist));
array[len - 1] = PERL_UNICODE_MAX + 1;
}
else { /* Remove the 0x110000 */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, *get_invlist_offset_addr(invlist));
}
}
/* Need to allocate extra space to accommodate Perl's addition of a
* trailing NUL to SvPV's, since it thinks they are always strings */
SV* new_invlist = _new_invlist(_invlist_len(invlist) + 1);
- STRLEN length = SvCUR(invlist);
+ STRLEN physical_length = SvCUR(invlist);
+ bool offset = *(get_invlist_offset_addr(invlist));
PERL_ARGS_ASSERT_INVLIST_CLONE;
- SvCUR_set(new_invlist, length); /* This isn't done automatically */
- invlist_set_len(new_invlist, _invlist_len(invlist));
- Copy(SvPVX(invlist), SvPVX(new_invlist), length, char);
+ *(get_invlist_offset_addr(new_invlist)) = offset;
+ invlist_set_len(new_invlist, _invlist_len(invlist), offset);
+ Copy(SvPVX(invlist), SvPVX(new_invlist), physical_length, char);
return new_invlist;
}
-PERL_STATIC_INLINE UV*
+PERL_STATIC_INLINE STRLEN*
S_get_invlist_iter_addr(pTHX_ SV* invlist)
{
/* Return the address of the UV that contains the current iteration
PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR;
- return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV)));
-}
-
-PERL_STATIC_INLINE UV*
-S_get_invlist_version_id_addr(pTHX_ SV* invlist)
-{
- /* Return the address of the UV that contains the version id. */
-
- PERL_ARGS_ASSERT_GET_INVLIST_VERSION_ID_ADDR;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
- return (UV *) (SvPVX(invlist) + (INVLIST_VERSION_ID_OFFSET * sizeof (UV)));
+ return &(((XINVLIST*) SvANY(invlist))->iterator);
}
PERL_STATIC_INLINE void
PERL_ARGS_ASSERT_INVLIST_ITERFINISH;
- *get_invlist_iter_addr(invlist) = UV_MAX;
+ *get_invlist_iter_addr(invlist) = (STRLEN) UV_MAX;
}
STATIC bool
* <*start> and <*end> are unchanged, and the next call to this function
* will start over at the beginning of the list */
- UV* pos = get_invlist_iter_addr(invlist);
+ STRLEN* pos = get_invlist_iter_addr(invlist);
UV len = _invlist_len(invlist);
UV *array;
PERL_ARGS_ASSERT_INVLIST_ITERNEXT;
if (*pos >= len) {
- *pos = UV_MAX; /* Force iterinit() to be required next time */
+ *pos = (STRLEN) UV_MAX; /* Force iterinit() to be required next time */
return FALSE;
}
{
PERL_ARGS_ASSERT_INVLIST_IS_ITERATING;
- return *(get_invlist_iter_addr(invlist)) < UV_MAX;
+ return *(get_invlist_iter_addr(invlist)) < (STRLEN) UV_MAX;
}
PERL_STATIC_INLINE UV
}
#endif
-#if 0
+#ifdef PERL_ARGS_ASSERT__INVLISTEQ
bool
S__invlistEQ(pTHX_ SV* const a, SV* const b, const bool complement_b)
{
* at the 0 that is always stored immediately before the array. */
array_b--;
len_b++;
- array_b[0] = 0;
}
}
#endif
#undef HEADER_LENGTH
-#undef INVLIST_INITIAL_LENGTH
#undef TO_INTERNAL_SIZE
#undef FROM_INTERNAL_SIZE
-#undef INVLIST_LEN_OFFSET
-#undef INVLIST_ZERO_OFFSET
-#undef INVLIST_ITER_OFFSET
#undef INVLIST_VERSION_ID
-#undef INVLIST_PREVIOUS_INDEX_OFFSET
/* End of inversion list object */
default:
/* Use deprecated warning to increase the
* chances of this being output */
- ckWARN2regdep(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j);
+ ckWARN2reg_d(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j);
break;
}
}
for (i = start; i <= (int) high; i++) {
if (! ANYOF_BITMAP_TEST(ret, i)) {
ANYOF_BITMAP_SET(ret, i);
- prevvalue = value;
- value = i;
}
}
}
)
);
if ( IS_ANYOF_TRIE(op) || trie->bitmap ) {
- int i;
- int rangestart = -1;
- U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie);
sv_catpvs(sv, "[");
- for (i = 0; i <= 256; i++) {
- if (i < 256 && BITMAP_TEST(bitmap,i)) {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++)
- put_byte(sv, rangestart);
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i - 1);
- }
- rangestart = -1;
- }
- }
+ (void) put_latin1_charclass_innards(sv, IS_ANYOF_TRIE(op)
+ ? ANYOF_BITMAP(o)
+ : TRIE_BITMAP(trie));
sv_catpvs(sv, "]");
}
} else if (k == LOGICAL)
Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */
else if (k == ANYOF) {
- int i, rangestart = -1;
const U8 flags = ANYOF_FLAGS(o);
int do_sep = 0;
sv_catpvs(sv, "^");
/* output what the standard cp 0-255 bitmap matches */
- for (i = 0; i <= 256; i++) {
- if (i < 256 && ANYOF_BITMAP_TEST(o,i)) {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++)
- put_byte(sv, rangestart);
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i - 1);
- }
- do_sep = 1;
- rangestart = -1;
- }
- }
+ do_sep = put_latin1_charclass_innards(sv, ANYOF_BITMAP(o));
EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
/* output any special charclass tests (used entirely under use locale) */
- if (ANYOF_CLASS_TEST_ANY_SET(o))
- for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++)
+ if (ANYOF_CLASS_TEST_ANY_SET(o)) {
+ int i;
+ for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++) {
if (ANYOF_CLASS_TEST(o,i)) {
sv_catpv(sv, anyofs[i]);
do_sep = 1;
}
+ }
+ }
EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
/* output information about the unicode matching */
if (flags & ANYOF_UNICODE_ALL)
sv_catpvs(sv, "{unicode_all}");
- else if (ANYOF_NONBITMAP(o))
- sv_catpvs(sv, "{unicode}");
- if (flags & ANYOF_NONBITMAP_NON_UTF8)
- sv_catpvs(sv, "{outside bitmap}");
+ else if (ANYOF_NONBITMAP(o)) {
+ SV *lv; /* Set if there is something outside the bit map. */
- if (ANYOF_NONBITMAP(o)) {
- SV *lv; /* Set if there is something outside the bit map */
+ if (flags & ANYOF_NONBITMAP_NON_UTF8) {
+ sv_catpvs(sv, "{outside bitmap}");
+ }
+ else {
+ sv_catpvs(sv, "{utf8}");
+ }
+
+ /* Get the stuff that wasn't in the bitmap */
SV * const sw = regclass_swash(prog, o, FALSE, &lv, NULL);
bool byte_output = FALSE; /* If something in the bitmap has been
output */
-
if (lv && lv != &PL_sv_undef) {
- if (sw) {
- U8 s[UTF8_MAXBYTES_CASE+1];
-
- for (i = 0; i <= 256; i++) { /* Look at chars in bitmap */
- uvchr_to_utf8(s, i);
-
- if (i < 256
- && ! ANYOF_BITMAP_TEST(o, i) /* Don't duplicate
- things already
- output as part
- of the bitmap */
- && swash_fetch(sw, s, TRUE))
- {
- if (rangestart == -1)
- rangestart = i;
- } else if (rangestart != -1) {
- byte_output = TRUE;
- if (i <= rangestart + 3)
- for (; rangestart < i; rangestart++) {
- put_byte(sv, rangestart);
- }
- else {
- put_byte(sv, rangestart);
- sv_catpvs(sv, "-");
- put_byte(sv, i-1);
- }
- rangestart = -1;
- }
- }
- }
-
- {
- char *s = savesvpv(lv);
- char * const origs = s;
+ char *s = savesvpv(lv);
+ char * const origs = s;
- while (*s && *s != '\n')
- s++;
+ while (*s && *s != '\n')
+ s++;
- if (*s == '\n') {
- const char * const t = ++s;
+ if (*s == '\n') {
+ const char * const t = ++s;
- if (byte_output) {
- sv_catpvs(sv, " ");
- }
+ if (byte_output) {
+ sv_catpvs(sv, " ");
+ }
- while (*s) {
- if (*s == '\n') {
+ while (*s) {
+ if (*s == '\n') {
- /* Truncate very long output */
- if (s - origs > 256) {
- Perl_sv_catpvf(aTHX_ sv,
- "%.*s...",
- (int) (s - origs - 1),
- t);
- goto out_dump;
- }
- *s = ' ';
- }
- else if (*s == '\t') {
- *s = '-';
- }
- s++;
- }
- if (s[-1] == ' ')
- s[-1] = 0;
+ /* Truncate very long output */
+ if (s - origs > 256) {
+ Perl_sv_catpvf(aTHX_ sv,
+ "%.*s...",
+ (int) (s - origs - 1),
+ t);
+ goto out_dump;
+ }
+ *s = ' ';
+ }
+ else if (*s == '\t') {
+ *s = '-';
+ }
+ s++;
+ }
+ if (s[-1] == ' ')
+ s[-1] = 0;
- sv_catpv(sv, t);
- }
+ sv_catpv(sv, t);
+ }
- out_dump:
+ out_dump:
- Safefree(origs);
- }
+ Safefree(origs);
SvREFCNT_dec_NN(lv);
}
}
so we need to copy it locally. */
RX_WRAPPED(dstr) = SAVEPVN(RX_WRAPPED(sstr), SvCUR(sstr)+1);
ret->mother_re = NULL;
- ret->gofs = 0;
}
#endif /* PERL_IN_XSUB_RE */
So the old condition can be simplified to !isPRINT(c) */
if (!isPRINT(c)) {
- if (c < 256) {
- Perl_sv_catpvf(aTHX_ sv, "\\x%02x", c);
- }
- else {
- Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c);
- }
+ switch (c) {
+ case '\r': Perl_sv_catpvf(aTHX_ sv, "\\r"); break;
+ case '\n': Perl_sv_catpvf(aTHX_ sv, "\\n"); break;
+ case '\t': Perl_sv_catpvf(aTHX_ sv, "\\t"); break;
+ case '\f': Perl_sv_catpvf(aTHX_ sv, "\\f"); break;
+ case '\a': Perl_sv_catpvf(aTHX_ sv, "\\a"); break;
+
+ default:
+ Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c);
+ break;
+ }
}
else {
const char string = c;
}
}
+STATIC bool
+S_put_latin1_charclass_innards(pTHX_ SV *sv, char *bitmap)
+{
+ /* Appends to 'sv' a displayable version of the innards of the bracketed
+ * character class whose bitmap is 'bitmap'; Returns 'TRUE' if it actually
+ * output anything */
+
+ int i;
+ int rangestart = -1;
+ bool has_output_anything = FALSE;
+
+ PERL_ARGS_ASSERT_PUT_LATIN1_CHARCLASS_INNARDS;
+
+ for (i = 0; i <= 256; i++) {
+ if (i < 256 && BITMAP_TEST((U8 *) bitmap,i)) {
+ if (rangestart == -1)
+ rangestart = i;
+ } else if (rangestart != -1) {
+ int j = i - 1;
+ if (i <= rangestart + 3) { /* Individual chars in short ranges */
+ for (; rangestart < i; rangestart++)
+ put_byte(sv, rangestart);
+ }
+ else if ( j > 255
+ || ! isALPHANUMERIC(rangestart)
+ || ! isALPHANUMERIC(j)
+ || isDIGIT(rangestart) != isDIGIT(j)
+ || isUPPER(rangestart) != isUPPER(j)
+ || isLOWER(rangestart) != isLOWER(j)
+
+ /* This final test should get optimized out except
+ * on EBCDIC platforms, where it causes ranges that
+ * cross discontinuities like i/j to be shown as hex
+ * instead of the misleading, e.g. H-K (since that
+ * range includes more than H, I, J, K). */
+ || (j - rangestart)
+ != NATIVE_TO_ASCII(j) - NATIVE_TO_ASCII(rangestart))
+ {
+ Perl_sv_catpvf(aTHX_ sv, "\\x{%02x}-\\x{%02x}",
+ rangestart,
+ (j < 256) ? j : 255);
+ }
+ else { /* Here, the ends of the range are both digits, or both
+ uppercase, or both lowercase; and there's no
+ discontinuity in the range (which could happen on EBCDIC
+ platforms) */
+ put_byte(sv, rangestart);
+ sv_catpvs(sv, "-");
+ put_byte(sv, j);
+ }
+ rangestart = -1;
+ has_output_anything = TRUE;
+ }
+ }
+
+ return has_output_anything;
+}
#define CLEAR_OPTSTART \
if (optstart) STMT_START { \
https://perl5.git.perl.org / perl5.git / blobdiff