This is a live mirror of the Perl 5 development currently hosted at https://github.com/perl/perl5
https://perl5.git.perl.org / perl5.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
write_buildcustomize.pl no longer writes to STDOUT
[perl5.git] / vms / descrip_mms.template
diff --git a/vms/descrip_mms.template b/vms/descrip_mms.template
index f31fe7e..7ccc84b 100644 (file)
--- a/vms/descrip_mms.template
+++ b/vms/descrip_mms.template
@@ -151,14 +151,6 @@ THRLIBS2 = sys$share:cma$open_lib_shr/share|sys$share:cma$open_rtl/share
 .endif
 .endif
 
-.ifdef FAKETHREADED
-THREADDEF = 
-THREADH = fakethr.h
-THREAD = THREAD
-.else
-THREADH =
-.endif
-
 .ifdef MTU
 .ifdef MTK
 MTHREADLINKFLAGS = /THREADS=(MULTIPLE_KERNEL,UPCALLS)
@@ -189,7 +181,7 @@ NOOP = continue
 # Macros to invoke a copy of miniperl during the build.  Targets which
 # are built using these macros should depend on $(MINIPERL_EXE)
 MINIPERL_EXE = Sys$Disk:[]miniperl$(E)
-MINIPERL = MCR $(MINIPERL_EXE) "-I[.lib]" "-I[.dist.Cwd]" "-I[.dist.Cwd.lib]"
+MINIPERL = MCR $(MINIPERL_EXE) "-I[.lib]"
 MINIPERLQ = MCR $(MINIPERL_EXE) ""-I[.lib]""
 XSUBPP = $(MINIPERL) "-I[.ext.re]" [.lib.extutils]xsubpp -noprototypes
 # Macro to invoke a preexisting copy of Perl.  This is used to regenerate
@@ -255,31 +247,11 @@ h2 = iperlsys.h keywords.h mydtrace.h mg.h mg_vtable.h nostdio.h op.h
 h3 = op_reg_common.h opcode.h opnames.h overload.h pad.h parser.h patchlevel.h 
 h4 = perl.h perlapi.h perlio.h perlsdio.h perlvars.h perly.h
 h5 = pp.h pp_proto.h proto.h regcomp.h regexp.h regnodes.h scope.h
-h6 = sv.h thread.h utf8.h util.h vmsish.h warnings.h
-h7 = xsub.h $(THREADH)
-h = $(h0) $(h1) $(h2) $(h3) $(h4) $(h5) $(h6) $(h7)
-
-ac0 = $(ARCHCORE)av.h
-ac1 = $(ARCHCORE)config.h $(ARCHCORE)cop.h $(ARCHCORE)cv.h $(ARCHCORE)embed.h
-ac2 = $(ARCHCORE)embedvar.h $(ARCHCORE)EXTERN.h $(ARCHCORE)fakethr.h
-ac3 = $(ARCHCORE)form.h $(ARCHCORE)git_version.h $(ARCHCORE)gv.h $(ARCHCORE)handy.h $(ARCHCORE)hv.h
-ac4 = $(ARCHCORE)l1_char_class_tab.h $(ARCHCORE)INTERN.h $(ARCHCORE)intrpvar.h $(ARCHCORE)iperlsys.h
-ac5 = $(ARCHCORE)keywords.h $(ARCHCORE)mydtrace.h $(ARCHCORE)mg.h $(ARCHCORE)mg_vtable.h $(ARCHCORE)nostdio.h
-ac6 = $(ARCHCORE)op_reg_common.h $(ARCHCORE)op.h $(ARCHCORE)opcode.h $(ARCHCORE)opnames.h  
-ac7 = $(ARCHCORE)overload.h $(ARCHCORE)pad.h $(ARCHCORE)parser.h $(ARCHCORE)patchlevel.h
-ac8 = $(ARCHCORE)perl.h $(ARCHCORE)perlapi.h $(ARCHCORE)perlio.h $(ARCHCORE)perlsdio.h
-ac9 = $(ARCHCORE)perlsfio.h $(ARCHCORE)perlvars.h $(ARCHCORE)perly.h $(ARCHCORE)pp.h
-.ifdef THREADED
-ac10 = $(ARCHCORE)pp_proto.h $(ARCHCORE)proto.h $(ARCHCORE)reentr.h $(ARCHCORE)regcomp.h
-.else
-ac10 = $(ARCHCORE)pp_proto.h $(ARCHCORE)proto.h $(ARCHCORE)regcomp.h
-.endif
-ac11 = $(ARCHCORE)regexp.h $(ARCHCORE)regnodes.h $(ARCHCORE)scope.h
-ac12 = $(ARCHCORE)sv.h
-ac13 = $(ARCHCORE)thread.h $(ARCHCORE)utf8.h $(ARCHCORE)util.h
-ac14 = $(ARCHCORE)vmsish.h $(ARCHCORE)warnings.h $(ARCHCORE)xsub.h
+h6 = sv.h thread.h utf8.h util.h vmsish.h warnings.h xsub.h
+h = $(h0) $(h1) $(h2) $(h3) $(h4) $(h5) $(h6)
+
 acopt = $(ARCHCORE)perlshr_attr.opt $(ARCHCORE)$(DBG)perlshr_bld.opt
-ac = $(ac0) $(ac1) $(ac2) $(ac3) $(ac4) $(ac5) $(ac6) $(ac7) $(ac8) $(ac9) $(ac10) $(ac11) $(ac12) $(ac13) $(ac14) $(acopt)
+ac = archcore_includes.ts $(acopt)
 
 generated_headers = uudmap.h bitcount.h mg_data.h
 
@@ -313,7 +285,7 @@ utils1 = [.utils]perldoc.com [.lib.ExtUtils]Miniperl.pm [.utils]c2ph.com [.utils
 utils2 = [.utils]h2xs.com [.utils]libnetcfg.com [.lib]perlbug.com [.utils]json_pp.com
 utils3 = [.utils]perlivp.com [.lib]splain.com [.utils]pl2pm.com [.utils]xsubpp.com [.utils]pod2html.com [.utils]instmodsh.com
 utils4 = [.utils]enc2xs.com [.utils]piconv.com [.utils]cpan.com [.utils]prove.com [.utils]ptar.com [.utils]ptardiff.com [.utils]shasum.com
-utils5 = [.utils]corelist.com [.utils]config_data.com [.utils]cpanp.com [.utils]cpan2dist.com [.utils]cpanp-run-perl.com [.utils]ptargrep.com
+utils5 = [.utils]corelist.com [.utils]config_data.com [.utils]ptargrep.com [.utils]zipdetails.com
 
 .ifdef NOX2P
 all : base extras archcorefiles preplibrary [.pod]perltoc.pod
@@ -345,17 +317,17 @@ x2p : [.x2p]$(DBG)a2p$(E) [.x2p]s2p.com [.x2p]find2perl.com
 extra.pods : miniperl
        @ @extra_pods.com
 
-PERLDELTA_CURRENT = [.pod]perl5156delta.pod
+PERLDELTA_CURRENT = [.pod]perl5191delta.pod
 
 $(PERLDELTA_CURRENT) : [.pod]perldelta.pod
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(MMS$TARGET)
-
-[.pod]perlapi.pod : embed.fnc autodoc.pl $(MINIPERL_EXE)
-       $(MINIPERL) autodoc.pl
+       Copy/NoConfirm/Log $(MMS$SOURCE) $(PERLDELTA_CURRENT)
 
 [.pod]perlmodlib.pod : [.pod]perlmodlib.pl MANIFEST $(MINIPERL_EXE)
        $(MINIPERL) [.pod]perlmodlib.pl "-q"
 
+[.pod]perlapi.pod : [.pod]perlintern.pod
+       @ $(NOOP)
+
 [.pod]perlintern.pod : embed.fnc autodoc.pl $(MINIPERL_EXE)
        $(MINIPERL) autodoc.pl
 
@@ -366,16 +338,20 @@ $(PERLDELTA_CURRENT) : [.pod]perldelta.pod
 archcorefiles : $(ac) $(ARCHAUTO)time.stamp
        @ $(NOOP)
 
-[.lib]buildcustomize.pl : write_buildcustomize.pl $(MINIPERL_EXE)
-       $(MINIPERL) write_buildcustomize.pl > [.lib]buildcustomize.pl
+# See the comment in Makefile.SH explaining this seemingly cranky ordering
+$(MINIPERL_EXE) : [.lib]buildcustomize.pl
+       @ $(NOOP)
 
 vmspipe.com : [.vms]vmspipe.com
        Copy/NoConfirm/Log $(MMS$SOURCE) []
 
 miniperl : $(DBG)miniperl$(E)  vmspipe.com
        @ Continue
-$(MINIPERL_EXE) :  miniperlmain$(O), $(DBG)libperlmini$(OLB) $(CRTL)
-       Link $(LINKFLAGS)/NoDebug/Trace/NoMap/NoFull/NoCross/Exe=$(MMS$TARGET) miniperlmain$(O), $(DBG)libperlmini$(OLB)/Library/Include=globals $(CRTLOPTS)
+
+[.lib]buildcustomize.pl :  miniperlmain$(O), $(DBG)libperlmini$(OLB) $(CRTL) write_buildcustomize.pl [.lib.VMS]Filespec.pm
+       Link $(LINKFLAGS)/NoDebug/Trace/NoMap/NoFull/NoCross/Exe=$(MINIPERL_EXE) miniperlmain$(O), $(DBG)libperlmini$(OLB)/Library/Include=globals $(CRTLOPTS)
+       $(MINIPERL) "-f" write_buildcustomize.pl
+
 $(DBG)miniperl$(E) :  miniperlmain$(O), $(DBG)libperlmini$(OLB) $(CRTL)
        Link $(LINKFLAGS)/Trace/Exe=$(MMS$TARGET) miniperlmain$(O), $(DBG)libperlmini$(OLB)/Library/Include=globals  $(CRTLOPTS)
 
@@ -436,8 +412,8 @@ generate_uudmap$(O) : generate_uudmap.c mg_raw.h
 # The song and dance with gen_shrfls.opt accommodates DCL's line length limit.
 $(DBG)perlshr_xtras.ts : perl.h config.h vmsish.h proto.h [.vms]gen_shrfls.pl $(MINIPERL_EXE) $(MAKEFILE) $(CRTL)
        @ $(MINIPERL) makedef.pl "PLATFORM=vms" > makedef.lis
-       @ $(MINIPERL) -e "print join('|',@ARGV),'|';" "$(CC)$(CFLAGS)" >gen_shrfls.opt
-       @ $(MINIPERL) -e "print join('|',@ARGV);" "$(O)" "$(DBG)" "$(OLB)" "$(EXT)" "$(CRTL)" >>gen_shrfls.opt
+       @ $(MINIPERLQ) -e "print join('|',@ARGV),'|';" "$(CC)$(CFLAGS)" >gen_shrfls.opt
+       @ $(MINIPERLQ) -e "print join('|',@ARGV);" "$(O)" "$(DBG)" "$(OLB)" "$(EXT)" "$(CRTL)" >>gen_shrfls.opt
        $(MINIPERL) [.vms]gen_shrfls.pl -f gen_shrfls.opt
        @ Delete/NoLog/NoConfirm gen_shrfls.opt;
        @ If F$Search("$(DBG)perlshr_xtras.ts").nes."" Then Delete/NoLog/NoConfirm $(DBG)perlshr_xtras.ts;*
@@ -468,7 +444,7 @@ DynaLoader$(O) : [.lib]buildcustomize.pl $(ARCHDIR)Config.pm $(MINIPERL_EXE) [.l
 dynext : $(LIBPREREQ) $(DBG)perlshr$(E) unidatafiles.ts DynaLoader$(O) preplibrary makeppport $(MINIPERL_EXE)
        $(MINIPERL) make_ext.pl "MAKE=$(MMS)" "--dynamic" "--static"
 
-nonxsext : $(LIBPREREQ) preplibrary $(MINIPERL_EXE)
+nonxsext : $(LIBPREREQ) preplibrary $(MINIPERL_EXE) [.pod]perlfunc.pod
        $(MINIPERL) make_ext.pl "MAKE=$(MMS)" "--nonxs"
 
 [.lib.VMS]Filespec.pm : [.vms.ext]Filespec.pm
@@ -487,15 +463,6 @@ nonxsext : $(LIBPREREQ) preplibrary $(MINIPERL_EXE)
 [.utils]cpan.com : [.utils]cpan.PL $(ARCHDIR)Config.pm
        $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
 
-[.utils]cpanp.com : [.utils]cpanp.PL $(ARCHDIR)Config.pm
-       $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
-
-[.utils]cpan2dist.com : [.utils]cpan2dist.PL $(ARCHDIR)Config.pm
-       $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
-
-[.utils]cpanp-run-perl.com : [.utils]cpanp-run-perl.PL $(ARCHDIR)Config.pm
-       $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
-
 [.utils]prove.com : [.utils]prove.PL $(ARCHDIR)Config.pm
        $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
 
@@ -561,6 +528,9 @@ nonxsext : $(LIBPREREQ) preplibrary $(MINIPERL_EXE)
 [.utils]xsubpp.com : [.utils]xsubpp.PL $(ARCHDIR)Config.pm nonxsext
        $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
 
+[.utils]zipdetails.com : [.utils]zipdetails.PL $(ARCHDIR)Config.pm nonxsext
+       $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
+
 [.utils]pod2html.com : [.utils]pod2html.PL $(ARCHDIR)Config.pm nonxsext
        $(MINIPERL) -"I[-.lib]" $(MMS$SOURCE)
 
@@ -575,7 +545,7 @@ nonxsext : $(LIBPREREQ) preplibrary $(MINIPERL_EXE)
 # search in same dir as source file
 [.x2p]a2p$(O) : [.x2p]a2p.c [.x2p]a2py.c [.x2p]INTERN.h [.x2p]a2p.h [.x2p]hash.h [.x2p]str.h config.h handy.h vmsish.h $(MINIPERL_EXE)
        $(MINIPERL) -pe "s/^#line\s+(\d+)\s+\Q""y.tab.c""/#line $1 ""y_tab.c""/;" $(MMS$SOURCE) >$(MMS$TARGET_NAME)_vms.c
-       $(CC) $(X2PCFLAGS) /Object=$(MMS$TARGET)/Include=([.x2p],[]) $(MMS$TARGET_NAME)_vms.c
+       $(CC) $(X2PCFLAGS) /Object=$(MMS$TARGET)/Include=([.x2p],[],"./x2p") $(MMS$TARGET_NAME)_vms.c
        Delete/Log/NoConfirm $(MMS$TARGET_NAME)_vms.c;
 
 # gcc cpp broken -- doesn't look in directory of source file for #include ""
@@ -631,8 +601,10 @@ regen_headers :
 perly$(O) : perly.c, perly.h, $(h)
 .endif
 
-[.t.lib]vmsfspec.t : [.vms.ext]filespec.t
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(MMS$TARGET)
+VMSFSPEC_T = [.t.lib]vmsfspec.t
+
+$(VMSFSPEC_T) : [.vms.ext]filespec.t
+       Copy/NoConfirm/Log $(MMS$SOURCE) $(VMSFSPEC_T)
 
 check : test
        @ Continue
@@ -653,10 +625,11 @@ minitest : $(MINITEST_EXE) [.lib.VMS]Filespec.pm unidatafiles.ts
 
 # install ought not need a source, but it doesn't work if one's not
 # there. Go figure...
-install : $(MINIPERL_EXE)
+install : $(PERL_EXE)
        @ @perl_setup.com
        If F$TrnLnm("Sys") .nes. "" Then Deass SYS
-       $(MINIPERL) installperl
+       @ define/user_mode $(DBG)PERLSHR SYS$DISK:[]$(DBG)perlshr$(E)
+       $(PERL) installperl
 
 archify : all
        @ Write Sys$Output "Moving files to architecture-specific locations for $(ARCHNAME)"
@@ -675,164 +648,11 @@ archify : all
        @ Write Sys$Output "    2. Delete Miniperl$(E)"
 
 # CORE subset for MakeMaker, so we can build Perl without sources
-$(ARCHCORE)av.h : av.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)config.h : config.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)cop.h : cop.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)cv.h : cv.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)embed.h : embed.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)embedvar.h : embedvar.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)EXTERN.h : EXTERN.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)fakethr.h : fakethr.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)form.h : form.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)git_version.h : git_version.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)gv.h : gv.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)handy.h : handy.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)hv.h : hv.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)l1_char_class_tab.h : l1_char_class_tab.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)INTERN.h : INTERN.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)intrpvar.h : intrpvar.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)iperlsys.h : iperlsys.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)keywords.h : keywords.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)mydtrace.h : mydtrace.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)mg.h : mg.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)mg_vtable.h : mg_vtable.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)nostdio.h : nostdio.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)op_reg_common.h : op_reg_common.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)op.h : op.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)opcode.h : opcode.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)opnames.h : opnames.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)overload.h : overload.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)pad.h : pad.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)parser.h : parser.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)patchlevel.h : patchlevel.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perl.h : perl.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perlapi.h : perlapi.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perlio.h : perlio.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perlsdio.h : perlsdio.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perlsfio.h : perlsfio.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perlvars.h : perlvars.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)perly.h : perly.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)pp.h : pp.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)pp_proto.h : pp_proto.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)proto.h : proto.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-.ifdef THREADED
-$(ARCHCORE)reentr.h : reentr.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-.endif
-$(ARCHCORE)regcomp.h : regcomp.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)regexp.h : regexp.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)regnodes.h : regnodes.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)scope.h : scope.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)sv.h : sv.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)thread.h : thread.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)utf8.h : utf8.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)util.h : util.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)vmsish.h : vmsish.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)warnings.h : warnings.h
-       @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
-$(ARCHCORE)xsub.h : xsub.h
+
+archcore_includes.ts :
        @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
-       Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
+       Copy/NoConfirm/Log *.h $(ARCHCORE)
+       @ Copy _NLA0: $(MMS$TARGET)
 $(ARCHCORE)$(DBG)libperl$(OLB) : $(DBG)libperl$(OLB) $(DBG)perlshr_xtras.ts
        @ If F$Search("$(ARCHDIR)CORE.dir").eqs."" Then Create/Directory $(ARCHCORE)
        Copy/NoConfirm/Log $(MMS$SOURCE) $(ARCHCORE)
Unnamed repository; edit this file 'description' to name the repository.