# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl58.dll). Also makes individual DLLs for the XS extensions.
+# (perl59.dll). Also makes individual DLLs for the XS extensions.
#
##
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER *= \5.7.3
+#INST_VER *= \5.9.2
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-INST_ARCH *= \$(ARCHNAME)
+#INST_ARCH *= \$(ARCHNAME)
#
# uncomment to enable multiple interpreters. This is need for fork()
-# emulation.
+# emulation and for thread support.
#
USE_MULTI *= define
#
-# Beginnings of interpreter cloning/threads; still very incomplete.
-# This should be enabled to get the fork() emulation. This needs
-# USE_MULTI as well.
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.
+# This needs USE_MULTI above.
#
USE_ITHREADS *= define
#
# uncomment to enable the implicit "host" layer for all system calls
-# made by perl. This needs USE_MULTI above. This is also needed to
-# get fork().
+# made by perl. This needs USE_MULTI above.
+# This is also needed to get fork().
#
USE_IMP_SYS *= define
#
-# uncomment to enable the experimental PerlIO I/O subsystem.
-USE_PERLIO = define
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+USE_PERLIO *= define
#
-# WARNING! This option is deprecated and will eventually go away (enable
-# USE_ITHREADS instead).
-#
-# uncomment to enable threads-capabilities. This is incompatible with
-# USE_ITHREADS, and is only here for people who may have come to rely
-# on the experimental Thread support that was in 5.005.
-#
-#USE_5005THREADS *= define
+# Comment this out if you don't want to enable large file support for
+# some reason. Should normally only be changed to maintain compatibility
+# with an older release of perl.
+USE_LARGE_FILES *= define
#
# uncomment exactly one of the following
# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
# Visual C++ >= 6.x
-CCTYPE *= MSVC60
+#CCTYPE *= MSVC60
# Borland 5.02 or later
#CCTYPE *= BORLAND
-# mingw32+gcc-2.95.2 or better
-#CCTYPE *= GCC
+# MinGW with gcc-2.95.2 or later
+CCTYPE *= GCC
#
# uncomment this if your Borland compiler is older than v5.4.
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
-CFG *= Debug
+#CFG *= Debug
#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
#USE_SETARGV *= define
#
-# if you have the source for des_fcrypt(), uncomment this and make sure the
-# file exists (see README.win32). File should be located in the same
-# directory as this file.
+# if you want to have the crypt() builtin function implemented, leave this or
+# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
+# version of des_fcrypt().
#
-#CRYPT_SRC *= fcrypt.c
+CRYPT_SRC *= fcrypt.c
#
# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
#PERL_MALLOC *= define
#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function. This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS *= define
+
+#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
.ENDIF
PERL_MALLOC *= undef
-
-USE_5005THREADS *= undef
-
-.IF "$(USE_5005THREADS)" == "define"
-USE_ITHREADS != undef
-.ENDIF
-
-.IF "$(USE_IMP_SYS)" == "define"
-PERL_MALLOC != undef
-.ENDIF
+DEBUG_MSTATS *= undef
USE_MULTI *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
USE_PERLIO *= undef
+USE_LARGE_FILES *= undef
USE_PERLCRT *= undef
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)" == "defineundefundef"
+.IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == "undef"
+DEBUG_MSTATS = undef
+.ENDIF
+
+.IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT += -DPERL_DEBUGGING_MSTATS
+.ENDIF
+
+.IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
.ENDIF
-.IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
+.IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
-USE_5005THREADS != undef
.ENDIF
-.IF "$(USE_MULTI)$(USE_5005THREADS)" != "undefundef"
+.IF "$(USE_MULTI)" != "undef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
.ENDIF
.ENDIF
-.IF "$(USE_5005THREADS)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
-.ELIF "$(USE_MULTI)" == "define"
+.IF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
.ELSE
.IF "$(USE_PERLIO)" == "define"
# VC 6.0 can load the socket dll on demand. Makes the test suite
# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
.IF "$(CFG)" == "Debug"
.ELSE
.ELIF "$(CCTYPE)" == "GCC"
CC = gcc
-LINK32 = gcc
+LINK32 = g++
LIB32 = ar rc
IMPLIB = dlltool
-RSC = rc
+RSC = windres
i = .i
o = .o
LIBFILES = $(CRYPT_LIB) $(LIBC) \
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
+ -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
-lwinmm -lversion -lodbc32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -g
.ELSE
-OPTIMIZE = -g -O2
-LINK_DBG = -g
+OPTIMIZE = -s -O2
+LINK_DBG = -s
.ENDIF
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LIBC = PerlCRT.lib
.ENDIF
-PERLEXE_RES =
-PERLDLL_RES =
-
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
.ENDIF
LINK_DBG = -debug
.ELSE
-.IF "$(CFG)" == "Optimize"
-# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 -MD -DNDEBUG
-OPTIMIZE = -O1 -MD -DNDEBUG
+OPTIMIZE = -MD -Zi -DNDEBUG
+# we enable debug symbols in release builds also
+LINK_DBG = -debug -opt:ref,icf
+# you may want to enable this if you want COFF symbols in the executables
+# in addition to the PDB symbols. The default Dr. Watson that ships with
+# Windows can use the the former but not latter. The free WinDbg can be
+# installed to get better stack traces from just the PDB symbols, so we
+# avoid the bloat of COFF symbols by default.
+#LINK_DBG = $(LINK_DBG) -debugtype:both
+.IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE += -Ox -GL
+LINK_DBG += -ltcg
.ELSE
-OPTIMIZE = -Od -MD -DNDEBUG
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE += -O1
+#OPTIMIZE += -O2
.ENDIF
-LINK_DBG = -release
.ENDIF
.IF "$(WIN64)" == "define"
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
version.lib
# win64 doesn't have some libs
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+# Some dmake's built with Borland C++, including Sarathy's one at:
+# http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
+# require backslashes to be doubled-up when written to $(mktmp) files.
+# Other dmake's do not require this and would actually output a double
+# backslash if they were doubled-up.
+.IF "$(shell type $(mktmp \\))"=="\\"
+B=\\
+.ELSE
+B=\\\
+.ENDIF
+
o *= .obj
a *= .lib
.ENDIF
.rc.res:
+.IF "$(CCTYPE)" == "GCC"
+ $(RSC) --use-temp-file -i $< -o $@
+.ELSE
$(RSC) -i.. $<
+.ENDIF
#
# various targets
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
+CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+# Unicode data files generated by mktables
+UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
+ ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+ ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+ ..\lib\unicore\PVA.pl
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1 = ..\lib\unicore\To
+UNIDATADIR2 = ..\lib\unicore\lib
+
+PERLEXE_ICO = .\perlexe.ico
+PERLEXE_RES = .\perlexe.res
+PERLDLL_RES =
+
# Nominate a target which causes extensions to be re-built
# This used to be $(PERLEXE), but at worst it is the .dll that they depend
# on and really only the interface - i.e. the .def file used to export symbols
..\utils\perlbug \
..\utils\pl2pm \
..\utils\c2ph \
+ ..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
..\utils\perlcc \
..\utils\perlivp \
..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
+ ..\utils\corelist \
+ ..\utils\cpan \
+ ..\utils\xsubpp \
+ ..\utils\prove \
+ ..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\podchecker \
..\pod\podselect \
..\x2p\find2perl \
+ ..\x2p\psed \
..\x2p\s2p \
- ..\lib\ExtUtils\xsubpp \
bin\exetype.pl \
bin\runperl.pl \
bin\pl2bat.pl \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl58$(a)
+PERLIMPLIB = ..\libperl59$(a)
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= ..\perl58$(a)
-PERLDLL = ..\perl58.dll
+PERLIMPLIB *= ..\perl59$(a)
+PERLDLL = ..\perl59.dll
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
+NOOP = @echo.
#
# filenames given to xsubpp must have forward slashes (since it puts
..\mg.c \
..\numeric.c \
..\op.c \
+ ..\pad.c \
..\perl.c \
..\perlapi.c \
..\perly.c \
.\win32sck.c \
.\win32thread.c
-.IF "$(USE_PERLIO)" == "define"
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#.IF "$(USE_PERLIO)" == "define"
WIN32_SRC += .\win32io.c
-.ENDIF
+#.ENDIF
.IF "$(CRYPT_SRC)" != ""
WIN32_SRC += .\$(CRYPT_SRC)
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes \
- Unicode/Normalize
-STATIC_EXT = DynaLoader
+ Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize Win32
+STATIC_EXT =
NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
# -- BKS 10-17-1999
CFG_VARS = \
INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
+ INST_TOP=$(INST_TOP:s,\,$B,) ~ \
+ INST_VER=$(INST_VER:s,\,$B,) ~ \
INST_ARCH=$(INST_ARCH) ~ \
archname=$(ARCHNAME) ~ \
cc=$(CC) ~ \
d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR:s/\/\\/) ~ \
+ incpath=$(CCINCDIR:s,\,$B,) ~ \
libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
+ libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
libc=$(LIBC) ~ \
make=dmake ~ \
_o=$(o) ~ \
_a=$(a) ~ \
lib_ext=$(a) ~ \
static_ext=$(STATIC_EXT) ~ \
- use5005threads=$(USE_5005THREADS) ~ \
+ usethreads=$(USE_ITHREADS) ~ \
useithreads=$(USE_ITHREADS) ~ \
- usethreads=$(USE_5005THREADS) ~ \
usemultiplicity=$(USE_MULTI) ~ \
useperlio=$(USE_PERLIO) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
+ uselargefiles=$(USE_LARGE_FILES) ~ \
+ LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
optimize=$(OPTIMIZE)
#
#
all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
.ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes
$(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
+
$(CORE_OBJ) : $(CORE_H)
+
$(DLL_OBJ) : $(CORE_H)
+
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
@$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
+ $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
+ $(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--def perldll.def \
--base-file perl.base \
--output-exp perl.exp
$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
+ $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
+ $(LIBFILES) perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
+ $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
@$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
$(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(PERLEXE_ICO): $(MINIPERL) makeico.pl
+ $(MINIPERL) makeico.pl > $@
+
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
#----------------------------------------------------------------------------------
Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
+
+Extensions_static : buildext.pl
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+
+# Note: The next two targets explicitly remove a "blibdirs.exists" file that
+# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
Extensions_clean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
+ -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
+
+Extensions_realclean :
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
+ -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
#----------------------------------------------------------------------------------
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+# Note that this next section is parsed (and regenerated) by pod/buildtoc
+# so please check that script before making structural changes here
utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.aix ..\pod\perlaix.pod
- copy ..\README.amiga ..\pod\perlamiga.pod
- copy ..\README.apollo ..\pod\perlapollo.pod
- copy ..\README.beos ..\pod\perlbeos.pod
- copy ..\README.bs2000 ..\pod\perlbs2000.pod
- copy ..\README.ce ..\pod\perlce.pod
- copy ..\README.cygwin ..\pod\perlcygwin.pod
- copy ..\README.dgux ..\pod\perldgux.pod
- copy ..\README.dos ..\pod\perldos.pod
- copy ..\README.epoc ..\pod\perlepoc.pod
- copy ..\README.hpux ..\pod\perlhpux.pod
- copy ..\README.hurd ..\pod\perlhurd.pod
- copy ..\README.machten ..\pod\perlmachten.pod
- copy ..\README.macos ..\pod\perlmacos.pod
- copy ..\README.mint ..\pod\perlmint.pod
- copy ..\README.mpeix ..\pod\perlmpeix.pod
- copy ..\README.netware ..\pod\perlnetware.pod
- copy ..\README.os2 ..\pod\perlos2.pod
- copy ..\README.os390 ..\pod\perlos390.pod
- copy ..\README.plan9 ..\pod\perlplan9.pod
- copy ..\README.qnx ..\pod\perlqnx.pod
- copy ..\README.solaris ..\pod\perlsolaris.pod
- copy ..\README.tru64 ..\pod\perltru64.pod
- copy ..\README.uts ..\pod\perluts.pod
- copy ..\README.vmesa ..\pod\perlvmesa.pod
copy ..\vms\perlvms.pod ..\pod\perlvms.pod
- copy ..\README.vos ..\pod\perlvos.pod
- copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\README.aix ..\pod\perlaix.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.apollo ..\pod\perlapollo.pod
+ copy ..\README.beos ..\pod\perlbeos.pod
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
+ copy ..\README.cn ..\pod\perlcn.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dgux ..\pod\perldgux.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.epoc ..\pod\perlepoc.pod
+ copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.hurd ..\pod\perlhurd.pod
+ copy ..\README.irix ..\pod\perlirix.pod
+ copy ..\README.jp ..\pod\perljp.pod
+ copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.macos ..\pod\perlmacos.pod
+ copy ..\README.macosx ..\pod\perlmacosx.pod
+ copy ..\README.mint ..\pod\perlmint.pod
+ copy ..\README.mpeix ..\pod\perlmpeix.pod
+ copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os390 ..\pod\perlos390.pod
+ copy ..\README.os400 ..\pod\perlos400.pod
+ copy ..\README.plan9 ..\pod\perlplan9.pod
+ copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.tru64 ..\pod\perltru64.pod
+ copy ..\README.tw ..\pod\perltw.pod
+ copy ..\README.uts ..\pod\perluts.pod
+ copy ..\README.vmesa ..\pod\perlvmesa.pod
+ copy ..\README.vms ..\pod\perlvms.pod
+ copy ..\README.vos ..\pod\perlvos.pod
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
-distclean: clean
+# Note that the pod cleanup in this next section is parsed (and regenerated
+# by pod/buildtoc so please check that script before making changes here
+
+# the doubled rmdir calls are needed because older cmd shells
+# don't understand /q
+distclean: realclean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-del /f *.def *.map
+ -del /f $(DYNALOADER).c
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
+ -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
+ -del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
+ -del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
- -del /f $(LIBDIR)\PerlIO\Scalar.pm
+ -del /f $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\Devel\PPPort.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Filter\Util\Call.pm
-del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\MIME\Base64.pm
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm
+ -del /f $(LIBDIR)\PerlIO\encoding.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\PerlIO\via.pm
+ -del /f $(LIBDIR)\Sys\Hostname.pm
+ -del /f $(LIBDIR)\Thread\Signal.pm $(LIBDIR)\Thread\Specific.pm
+ -del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
- -del /f $(LIBDIR)\List\Util.pm
- -del /f $(LIBDIR)\Scalar\Util.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
- -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME
- -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List
- -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar
+ -del /f $(LIBDIR)\Win32.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+ -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+ -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat checkpods \
- perlaix.pod perlamiga.pod perlapollo.pod \
- perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
- perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \
- perlmachten.pod perlmint.pod \
- perlmacos.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod \
- perlplan9.pod perlqnx.pod \
- perlsolaris.pod perltru64.pod perluts.pod \
- perlvmesa.pod perlvms.pod perlvos.pod \
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+ perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
+ perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
+ perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
+ perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
+ perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
+ perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
+ perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
+ perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
+ perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
+ perlwin32.pod \
+ pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- perlivp dprofpp *.bat
- -cd ..\x2p && del /f find2perl s2p *.bat
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp instmodsh prove corelist
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
- pm_to_blib
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+ -del /f perllibst.h
+ -del /f $(PERLEXE_ICO) perl.base
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+ -if exist $(AUTODIR) rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)
+ -if exist $(COREDIR) rmdir /s $(COREDIR)
install : all installbare installhtml
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
+ if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
- $(XCOPY) $(MINIPERL) ..\t\perl.exe
+$(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
+ cd ..\lib\unicore && \
+ ..\$(MINIPERL) -I.. mktables
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
+ $(XCOPY) $(MINIPERL) ..\t\$(NULL)
+ if exist ..\t\perl.exe del /f ..\t\perl.exe
+ rename ..\t\miniperl.exe perl.exe
.IF "$(CCTYPE)" == "BORLAND"
$(XCOPY) $(GLOBBAT) ..\t\$(NULL)
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
attrib -r ..\t\*.*
- copy test ..\t
cd ..\t && \
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+ $(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
.ENDIF
test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
-
-test-wide : test-prep
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
-
-test-wide-notty : test-prep
- set PERL_SKIP_TTY_TEST=1 && \
- set HARNESS_PERL_SWITCHES=-C && \
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
_test : $(RIGHTMAKE)
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-clean : Extensions_clean
+# the doubled rmdir calls are needed because older cmd shells
+# don't understand /q
+_clean :
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
-@erase perlglob$(o)
-@erase $(WPERLEXE)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s $(MINIDIR)
+ -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+ -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
+ -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+ -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
+ -@erase $(UNIDATAFILES)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
-@erase *.ilk
-@erase *.pdb
+clean : Extensions_clean _clean
+
+realclean : Extensions_realclean _clean
+
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
https://perl5.git.perl.org / perl5.git / blobdiff