linklibperl='$(LIBPERL)'
shrpldflags='$(LDDLFLAGS)'
ldlibpth=''
+DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
case "$useshrplib" in
true)
# Prefix all runs of 'miniperl' and 'perl' with
*) shrpldflags="$shrpldflags -b noentry"
;;
esac
- shrpldflags="$shrpldflags $ldflags $libs $cryptlib"
+ shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
;;
hpux*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
+ os390*)
+ shrpldflags='-W l,dll'
+ linklibperl='libperl.x'
+ DPERL_EXTERNAL_GLOB=''
+ ;;
esac
case "$ldlibpthname" in
'') ;;
LDFLAGS = $ldflags
CLDFLAGS = $ldflags
-SMALL = $small
-LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
+CPS = $cp -f
RMS = rm -f
ranlib = $ranlib
ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
-libs = $libs $cryptlib
+libs = $perllibs $cryptlib
public = perl $suidperl utilities translators
# how to tr(anslate) newlines
TRNL = '$trnl'
+!GROK!THIS!
# not used by Makefile but by installperl;
-# mentioned here so that metaconfig picks it up
-INSTALL_USR_BIN_PERL = $installusrbinperl
+# mentioned here so that metaconfig picks these up
+# $installusrbinperl
+# $versiononly
-!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
- makedir.SH myconfig.SH writemain.SH
+ makedir.SH myconfig.SH writemain.SH pod/Makefile.SH
shextract = Makefile cflags config.h makeaperl makedepend \
- makedir myconfig writemain
+ makedir myconfig writemain pod/Makefile
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
- pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
+ pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL \
+ pod/buildtoc.PL
+# lib/lib.pm is not listed here because it has a rule of its own.
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
- pod/pod2usage pod/podchecker pod/podselect
+ pod/pod2usage pod/podchecker pod/podselect \
+ pod/buildtoc
-addedbyconf = UU $(shextract) $(plextract) pstruct
+addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
translators: miniperl lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl lib/Config.pm $(plextract) FORCE
+utilities: miniperl lib/Config.pm $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
# Apparently some makes require an action for the FORCE target.
FORCE:
@sh -c true
+!NO!SUBS!
+$spitshell >>Makefile <<!GROK!THIS!
+
+# We do a copy of the op.c instead of a symlink because gcc gets huffy
+# if we have a symlink forest to another disk (it complains about too many
+# levels of symbolic links, even if we have only two)
-opmini$(OBJ_EXT): op.c
- $(RMS) opmini.c
- $(LNS) op.c opmini.c
- $(CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB opmini.c
- $(RMS) opmini.c
+opmini\$(OBJ_EXT): op.c config.h
+ \$(RMS) opmini.c
+ \$(CPS) op.c opmini.c
+ \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
+ \$(RMS) opmini.c
-miniperlmain$(OBJ_EXT): miniperlmain.c
+!GROK!THIS!
+$spitshell >>Makefile <<'!NO!SUBS!'
+miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
case "$osname" in
aix)
$spitshell >>Makefile <<!GROK!THIS!
-LIBS = $libs
+LIBS = $perllibs
# In AIX we need to change this for building Perl itself from
# its earlier definition (which is for building external
# extensions *after* Perl has been built and installed)
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
+ $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$osname" in
aix)
*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
- $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl \
+ $(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
$spitshell >>Makefile <<'!NO!SUBS!'
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+ $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
$spitshell >>Makefile <<'!NO!SUBS!'
-sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
+sperl$(OBJ_EXT): perl.c $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(plextract): miniperl lib/Config.pm
$(LDLIBPTH) ./miniperl -Ilib $@.PL
+lib/lib.pm: miniperl lib/Config.pm
+ $(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
+
extra.pods: miniperl
-@test -f extra.pods && rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
- $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
+ cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
- -@test -f vms/perlvms.pod && $(LNS) ../vms/perlvms.pod pod/perlvms.pod && echo "pod/perlvms.pod" >> extra.pods
+ -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
install-strip:
$(MAKE) STRIPFLAGS=-s install
-install: all install.perl install.man
+install:
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS)
+
+install-verbose:
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V
+
+install-silent:
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S
+
+no-install:
+ $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n
install.perl: all installperl
if [ -n "$(COMPILE)" ]; \
cd ../pod; $(MAKE) compile; \
else :; \
fi
- $(LDLIBPTH) ./perl installperl $(STRIPFLAGS)
+ $(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
install.man: all installman
- $(LDLIBPTH) ./perl installman
+ $(LDLIBPTH) ./perl installman $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
- -@test -f README.vms && $(LNS) ../README.vms vms/README_vms.pod
+ -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
$(LDLIBPTH) ./perl installhtml \
--podroot=. --podpath=. --recurse \
--htmldir=$(privlib)/html \
run_byacc: FORCE
$(BYACC) -d perly.y
- -chmod 664 perly.c
+ -chmod 664 perly.c perly.h
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
perly.h: perly.y
-@sh -c true
+PERLYVMS = vms/perly_c.vms vms/perly_h.vms
+
+$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl
+ perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
+
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
# To force them to be regenerated, type
# make regen_headers
+keywords.h: keywords.pl
+ -perl keywords.pl
+
+OPCODE_PL_OUTPUT = opcode.h opnames.h pp_proto.h pp.sym
+
+$(OPCODE_PL_OUTPUT): opcode.pl
+ -perl opcode.pl
+
+# Really the prerequisites for the next rule should only be "embed.pl pp.sym"
+# Writing it this way gives make a big hint to always run opcode.pl before
+# embed.pl. The alternative - running embed.pl then opcode.pl causes embed.pl
+# to be re-run next make invocation, and then all object files get recompiled.
+
+proto.h embed.h embedvar.h global.sym objXSUB.h perlapi.h perlapi.c pod/perlintern.pod pod/perlapi.pod: embed.pl $(OPCODE_PL_OUTPUT)
+ -perl embed.pl
+
+ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm: bytecode.pl
+ -perl bytecode.pl
+
+regnodes.h: regcomp.pl
+ -perl regcomp.pl
+
+warnings.h lib/warnings.pm: warnings.pl
+ -perl warnings.pl
+
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
-perl regcomp.pl
-perl warnings.pl
+regen_pods: FORCE
+ -cd pod; $(LDLIBPTH) make regen_pods
+
+regen_all: $(PERLYVMS) regen_headers regen_pods
+
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# automatically get built. There should ordinarily be no need to change
clean: _tidy _mopup
-realclean: _cleaner _mopup
+realclean: _realcleaner _mopup
@echo "Note that make realclean does not delete config.sh or Policy.sh"
-clobber: _cleaner _mopup
+_clobber:
rm -f config.sh cppstdin Policy.sh
+clobber: _realcleaner _mopup _clobber
+
distclean: clobber
+# Like distclean but also removes emacs backups and *.orig.
+veryclean: _verycleaner _mopup _clobber
+ -@rm -f Obsolete Wanted
+
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs extra.pods
+ -rm -f perl.exp ext.libs extra.pods opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
- rm -f perl suidperl miniperl $(LIBPERL)
+ rm -f perl suidperl miniperl $(LIBPERL) libperl.* microperl
# Do not 'make _tidy' directly.
_tidy:
done
rm -f testcompile compilelog
-# Do not 'make _cleaner' directly.
-_cleaner:
+_cleaner1:
-cd os2; rm -f Makefile
- -cd pod; $(LDLIBPTH) $(MAKE) realclean
- -cd utils; $(LDLIBPTH) $(MAKE) realclean
- -cd x2p; $(LDLIBPTH) $(MAKE) realclean
+ -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
+ -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
+ -cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(LDLIBPTH) sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
+ $(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done
- rm -f *.orig */*.orig *~ */*~ core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/tmp* t/c t/perl so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+
+_cleaner2:
+ rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
- rm -f lib/.exists lib/*/.exists
+ rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/IO/Socket lib/IO
+ -rmdir lib/B lib/Data lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/Sys lib/Thread
+
+_realcleaner:
+ @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
+ @$(LDLIBPTH) $(MAKE) _cleaner2
+
+_verycleaner:
+ @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
+ @$(LDLIBPTH) $(MAKE) _cleaner2
+ -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
-lint: perly.c $(c)
+lint: $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
# Need to unset during recursion to go out of loop.
else \
cd t && PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) ./perl TEST; \
fi
+ @echo "Ran tests" > t/rantests
utest ucheck: test-prep
if (true </dev/tty) >/dev/null 2>&1; then \
okfile: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
+oknack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
+
+okfilenack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
+
nok: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
+nokfile: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
+
+noknack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
+
+nokfilenack: utilities
+ $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
+
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
https://perl5.git.perl.org / perl5.git / blobdiff