Optional warnings are enabled by using the B<-w> switch. Warnings may
be captured by setting C<$SIG{__WARN__}> to a reference to a routine that
will be called on each warning instead of printing it. See L<perlvar>.
+
Trappable errors may be trapped using the eval operator. See
-L<perlfunc/eval>.
+L<perlfunc/eval>. In almost all cases, warnings may be selectively
+disabled or promoted to fatal errors using the C<warning> pragma.
+See L<warning>.
Some of these messages are generic. Spots that vary are denoted with a %s,
just as in a printf format. Note that some messages start with a %s!
to try to declare one with a package qualifier on the front. Use local()
if you want to localize a package variable.
-=item "my" variable %s masks earlier declaration in same scope
+=item "my" variable %s masks earlier declaration in same %s
-(W) A lexical variable has been redeclared in the same scope, effectively
-eliminating all access to the previous instance. This is almost always
-a typographical error. Note that the earlier variable will still exist
+(W) A lexical variable has been redeclared in the current scope or statement,
+effectively eliminating all access to the previous instance. This is almost
+always a typographical error. Note that the earlier variable will still exist
until the end of the scope or until all closure referents to it are
destroyed.
(F) The "use" keyword is recognized and executed at compile time, and returns
no useful value. See L<perlmod>.
+=item '!' allowed only after types %s
+
+(F) The '!' is allowed in pack() and unpack() only after certain types.
+See L<perlfunc/pack>.
+
+=item # cannot take a count
+
+(F) You had an unpack template indicating a counted-length string,
+but you have also specified an explicit size for the string.
+See L<perlfunc/pack>.
+
+=item # must be followed by a, A or Z
+
+(F) You had an unpack template indicating a counted-length string,
+which must be followed by one of the letters a, A or Z
+to indicate what sort of string is to be unpacked.
+See L<perlfunc/pack>.
+
+=item # must be followed by a*, A* or Z*
+
+(F) You had an pack template indicating a counted-length string,
+Currently the only things that can have their length counted are a*, A* or Z*.
+See L<perlfunc/pack>.
+
+=item # must follow a numeric type
+
+(F) You had an unpack template that contained a '#',
+but this did not follow some numeric unpack specification.
+See L<perlfunc/pack>.
+
=item % may only be used in unpack
(F) You can't pack a string by supplying a checksum, because the
checksumming process loses information, and you can't go the other
way. See L<perlfunc/unpack>.
+=item /%s/: Unrecognized escape \\%c passed through
+
+(W) You used a backslash-character combination which is not recognized
+by Perl. This combination appears in an interpolated variable or a
+C<'>-delimited regular expression.
+
=item %s (...) interpreted as function
(W) You've run afoul of the rule that says that any list operator followed
by parentheses turns into a function, with all the list operators arguments
found inside the parentheses. See L<perlop/Terms and List Operators (Leftward)>.
+=item %s() called too early to check prototype
+
+(W) You've called a function that has a prototype before the parser saw a
+definition or declaration for it, and Perl could not check that the call
+conforms to the prototype. You need to either add an early prototype
+declaration for the subroutine in question, or move the subroutine
+definition ahead of the call to get proper prototype checking. Alternatively,
+if you are certain that you're calling the function correctly, you may put
+an ampersand before the name to avoid the warning. See L<perlsub>.
+
=item %s argument is not a HASH element
(F) The argument to exists() must be a hash element, such as
instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
+=item (in cleanup) %s
+
+(W) This prefix usually indicates that a DESTROY() method raised
+the indicated exception. Since destructors are usually called by
+the system at arbitrary points during execution, and often a vast
+number of times, the warning is issued only once for any number
+of failures that would otherwise result in the same message being
+repeated.
+
+Failure of user callbacks dispatched using the C<G_KEEPERR> flag
+could also result in this warning. See L<perlcall/G_KEEPERR>.
+
=item (Missing semicolon on previous line?)
(S) This is an educated guess made in conjunction with the message "%s
(F) You had a pack template that specified an absolute position outside
the string being unpacked. See L<perlfunc/pack>.
+=item <> should be quotes
+
+(F) You wrote C<require E<lt>fileE<gt>> when you should have written
+C<require 'file'>.
+
=item accept() on closed fd
(W) You tried to do an accept on a closed socket. Did you forget to check
(X) You can't allocate more than 64K on an MS-DOS machine.
-=item Allocation too large
-
-(F) You can't allocate more than 2^31+"small amount" bytes.
-
=item Applying %s to %s will act on scalar(%s)
-(W) The pattern match (//), substitution (s///), and translation (tr///)
+(W) The pattern match (//), substitution (s///), and transliteration (tr///)
operators work on scalar values. If you apply one of them to an array
or a hash, it will convert the array or hash to a scalar value -- the
length of an array, or the population info of a hash -- and then work on
you thought. Normally it's pretty easy to disambiguate it by supplying
a missing quote, operator, parenthesis pair or declaration.
+=item Ambiguous call resolved as CORE::%s(), qualify as such or use &
+
+(W) A subroutine you have declared has the same name as a Perl keyword,
+and you have used the name without qualification for calling one or the
+other. Perl decided to call the builtin because the subroutine is
+not imported.
+
+To force interpretation as a subroutine call, either put an ampersand
+before the subroutine name, or qualify the name with its package.
+Alternatively, you can import the subroutine (or pretend that it's
+imported with the C<use subs> pragma).
+
+To silently interpret it as the Perl operator, use the C<CORE::> prefix
+on the operator (e.g. C<CORE::log($x)>) or by declaring the subroutine
+to be an object method (see L<attrs>).
+
=item Args must match #! line
(F) The setuid emulator requires that the arguments Perl was invoked
SvREFCNT_inc() was called too few times, or that the SV was mortalized
when it shouldn't have been, or that memory has been corrupted.
+=item Attempt to join self
+
+(F) You tried to join a thread from within itself, which is an
+impossible task. You may be joining the wrong thread, or you may
+need to move the join() to some other thread.
+
=item Attempt to pack pointer to temporary value
(W) You tried to pass a temporary value (like the result of a
(P) One of the internal hash routines was passed a null HV pointer.
+=item Bad index while coercing array into hash
+
+(F) The index looked up in the hash found as the 0'th element of a
+pseudo-hash is not legal. Index values must be at 1 or greater.
+See L<perlref>.
+
=item Bad name after %s::
(F) You started to name a symbol by using a package prefix, and then didn't
=item Bareword "%s" not allowed while "strict subs" in use
(F) With "strict subs" in use, a bareword is only allowed as a
-subroutine identifier, in curly braces or to the left of the "=>" symbol.
+subroutine identifier, in curly brackets or to the left of the "=>" symbol.
Perhaps you need to predeclare a subroutine?
=item Bareword "%s" refers to nonexistent package
could not be guaranteed (due to the errors), and since subsequent code
likely depends on its correct operation, Perl just gave up.
+=item Binary number > 0b11111111111111111111111111111111 non-portable
+
+(W) The binary number you specified is larger than 2**32-1
+(4294967295) and therefore non-portable between systems. See
+L<perlport> for more on portability concerns.
+
=item bind() on closed fd
(W) You tried to do a bind on a closed socket. Did you forget to check
(P) Perl detected an attempt to copy an internal value that is not copiable.
+=item Buffer overflow in prime_env_iter: %s
+
+(W) A warning peculiar to VMS. While Perl was preparing to iterate over
+%ENV, it encountered a logical name or symbol definition which was too long,
+so it was truncated to the string shown.
+
=item Callback called exit
(F) A subroutine invoked from an external package via perl_call_sv()
usually double the curlies to get the same effect though, because the inner
curlies will be considered a block that loops once. See L<perlfunc/next>.
+=item Can't read CRTL environ
+
+(S) A warning peculiar to VMS. Perl tried to read an element of %ENV
+from the CRTL's internal environment array and discovered the array was
+missing. You need to figure out where your CRTL misplaced its environ
+or define F<PERL_ENV_TABLES> (see L<perlvms>) so that environ is not searched.
+
=item Can't "redo" outside a block
(F) A "redo" statement was executed to restart the current block, but
(F) You used the syntax of a method call, but the slot filled by the
object reference or package name contains an expression that returns
-neither an object reference nor a package name. (Perhaps it's null?)
+a defined value which is neither an object reference nor a package name.
+Something like this will reproduce the error:
+
+ $BADREF = 42;
+ process $BADREF 1,2,3;
+ $BADREF->process(1,2,3);
+
+=item Can't call method "%s" on an undefined value
+
+(F) You used the syntax of a method call, but the slot filled by the
+object reference or package name contains an undefined value.
Something like this will reproduce the error:
$BADREF = undef;
(F) You called C<perl -x/foo/bar>, but C</foo/bar> is not a directory
that you can chdir to, possibly because it doesn't exist.
+=item Can't check filesystem of script "%s"
+
+(P) For some reason you can't check the filesystem of the script for nosuid.
+
=item Can't coerce %s to integer in %s
(F) Certain types of SVs, in particular real symbol table entries
(F) Certain types of SVs, in particular real symbol table entries
(typeglobs), can't be forced to stop being what they are.
+=item Can't coerce array into hash
+
+(F) You used an array where a hash was expected, but the array has no
+information on how to map from keys to array indices. You can do that
+only with arrays that have a hash reference at index 0.
+
=item Can't create pipe mailbox
(P) An error peculiar to VMS. The process is suffering from exhausted quotas
localize a package variable of the same name, qualify it with the
package name.
+=item Can't localize pseudo-hash element
+
+(F) You said something like C<local $ar-E<gt>{'key'}>, where $ar is
+a reference to a pseudo-hash. That hasn't been implemented yet, but
+you can get a similar effect by localizing the corresponding array
+element directly -- C<local $ar-E<gt>[$ar-E<gt>[0]{'key'}]>.
+
=item Can't locate auto/%s.al in @INC
(F) A function (or method) was called in a package which allows autoload,
in a function/method name or a failure to C<AutoSplit> the file, say, by
doing C<make install>.
-=item Can't locate %s in @INC
+=item Can't locate %s
-(F) You said to do (or require, or use) a file that couldn't be found
-in any of the libraries mentioned in @INC. Perhaps you need to set the
-PERL5LIB or PERL5OPT environment variable to say where the extra library
-is, or maybe the script needs to add the library name to @INC. Or maybe
-you just misspelled the name of the file. See L<perlfunc/require>.
+(F) You said to C<do> (or C<require>, or C<use>) a file that couldn't be
+found. Perl looks for the file in all the locations mentioned in @INC,
+unless the file name included the full path to the file. Perhaps you need
+to set the PERL5LIB or PERL5OPT environment variable to say where the extra
+library is, or maybe the script needs to add the library name to @INC. Or
+maybe you just misspelled the name of the file. See L<perlfunc/require>
+and L<lib>.
=item Can't locate object method "%s" via package "%s"
(F) List assignment to %ENV is not supported on some systems, notably VMS.
-=item Can't mktemp()
-
-(F) The mktemp() routine failed for some reason while trying to process
-a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
-
=item Can't modify %s in %s
(F) You aren't allowed to assign to the item indicated, or otherwise try to
of upgradability. Upgrading to undef indicates an error in the
code calling sv_upgrade.
+=item Can't use %%! because Errno.pm is not available
+
+(F) The first time the %! hash is used, perl automatically loads the
+Errno.pm module. The Errno module is expected to tie the %! hash to
+provide symbolic names for C<$!> errno values.
+
=item Can't use "my %s" in sort comparison
(F) The global variables $a and $b are reserved for sort comparisons.
Either qualify the sort variable with the package name, or rename the
lexical variable.
+=item Bad evalled substitution pattern
+
+(F) You've used the /e switch to evaluate the replacement for a
+substitution, but perl found a syntax error in the code to evaluate,
+most likely an unexpected right brace '}'.
+
=item Can't use %s for loop variable
(F) Only a simple scalar variable may be used as a loop variable on a foreach.
subscript. But to the left of the brackets was an expression that
didn't look like an array reference, or anything else subscriptable.
-=item Can't write to temp file for B<-e>: %s
+=item Can't weaken a nonreference
-(F) The write routine failed for some reason while trying to process
-a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
+(F) You attempted to weaken something that was not a reference. Only
+references can be weakened.
=item Can't x= to read-only value
an assignment operator, which implies modifying the value itself.
Perhaps you need to copy the value to a temporary, and repeat that.
-=item Cannot find an opnumber for "%s"
+=item Can't find an opnumber for "%s"
(F) A string of a form C<CORE::word> was given to prototype(), but
there is no builtin with the name C<word>.
-=item Cannot open temporary file
-
-(F) The create routine failed for some reason while trying to process
-a B<-e> switch. Maybe your /tmp partition is full, or clobbered.
-
-=item Cannot resolve method `%s' overloading `%s' in package `%s'
+=item Can't resolve method `%s' overloading `%s' in package `%s'
(F|P) Error resolving overloading specified by a method name (as
opposed to a subroutine reference): no such method callable via the
package. If method name is C<???>, this is an internal error.
+=item Character class [:%s:] unknown
+
+(F) The class in the character class [: :] syntax is unknown.
+
+=item Character class syntax [%s] belongs inside character classes
+
+(W) The character class constructs [: :], [= =], and [. .] go
+I<inside> character classes, the [] are part of the construct,
+for example: /[012[:alpha:]345]/. Note that the last two constructs
+are not currently implemented, they are placeholders for future extensions.
+
=item Character class syntax [. .] is reserved for future extensions
(W) Within regular expression character classes ([]) the syntax beginning
expression character class, just quote the square brackets with the
backslash: "\[." and ".\]".
-=item Character class syntax [: :] is reserved for future extensions
-
-(W) Within regular expression character classes ([]) the syntax beginning
-with "[:" and ending with ":]" is reserved for future extensions.
-If you need to represent those character sequences inside a regular
-expression character class, just quote the square brackets with the
-backslash: "\[:" and ":\]".
-
=item Character class syntax [= =] is reserved for future extensions
(W) Within regular expression character classes ([]) the syntax
Perl uses this generic message when none of the errors that it encountered
were severe enough to halt compilation immediately.
+=item Complex regular subexpression recursion limit (%d) exceeded
+
+(W) The regular expression engine uses recursion in complex situations
+where back-tracking is required. Recursion depth is limited to 32766,
+or perhaps less in architectures where the stack cannot grow
+arbitrarily. ("Simple" and "medium" situations are handled without
+recursion and are not subject to a limit.) Try shortening the string
+under examination; looping in Perl code (e.g. with C<while>) rather
+than in the regular expression engine; or rewriting the regular
+expression so that it is simpler or backtracks less. (See L<perlbook>
+for information on I<Mastering Regular Expressions>.)
+
=item connect() on closed fd
(W) You tried to do a connect on a closed socket. Did you forget to check
the return value of your socket() call? See L<perlfunc/connect>.
+=item Constant is not %s reference
+
+(F) A constant value (perhaps declared using the C<use constant> pragma)
+is being dereferenced, but it amounts to the wrong type of reference. The
+message indicates the type of reference that was expected. This usually
+indicates a syntax error in dereferencing the constant value.
+See L<perlsub/"Constant Functions"> and L<constant>.
+
=item Constant subroutine %s redefined
(S) You redefined a subroutine which had previously been eligible for
recursion, unless you're writing strange benchmark programs, in which
case it indicates something else.
+=item defined(@array) is deprecated
+
+(D) defined() is not usually useful on arrays because it checks for an
+undefined I<scalar> value. If you want to see if the array is empty,
+just use C<if (@array) { # not empty }> for example.
+
+=item defined(%hash) is deprecated
+
+(D) defined() is not usually useful on hashes because it checks for an
+undefined I<scalar> value. If you want to see if the hash is empty,
+just use C<if (%hash) { # not empty }> for example.
+
=item Delimiter for here document is too long
(F) In a here document construct like C<E<lt>E<lt>FOO>, the label
(F) An untrapped exception was raised while executing an END subroutine.
The interpreter is immediately exited.
+=item entering effective %s failed
+
+(F) While under the C<use filetest> pragma, switching the real and
+effective uids or gids failed.
+
=item Error converting file specification %s
(F) An error peculiar to VMS. Because Perl may have to deal with file
passed an invalid file specification to Perl, or you've found a
case the conversion routines don't handle. Drat.
+=item %s: Eval-group in insecure regular expression
+
+(F) Perl detected tainted data when trying to compile a regular expression
+that contains the C<(?{ ... })> zero-width assertion, which is unsafe.
+See L<perlre/(?{ code })>, and L<perlsec>.
+
+=item %s: Eval-group not allowed, use re 'eval'
+
+(F) A regular expression contained the C<(?{ ... })> zero-width assertion,
+but that construct is only allowed when the C<use re 'eval'> pragma is
+in effect. See L<perlre/(?{ code })>.
+
+=item %s: Eval-group not allowed at run time
+
+(F) Perl tried to compile a regular expression containing the C<(?{ ... })>
+zero-width assertion at run time, as it would when the pattern contains
+interpolated values. Since that is a security risk, it is not allowed.
+If you insist, you may still do this by explicitly building the pattern
+from an interpolated string at run time and using that in an eval().
+See L<perlre/(?{ code })>.
+
=item Excessively long <> operator
(F) The contents of a <> operator may not exceed the maximum size of a
(W) You are exiting a substitution by unconventional means, such as
a return, a goto, or a loop control statement.
+=item Explicit blessing to '' (assuming package main)
+
+(W) You are blessing a reference to a zero length string. This has
+the effect of blessing the reference into the package main. This is
+usually not what you want. Consider providing a default target
+package, e.g. bless($ref, $p || 'MyPackage');
+
=item Fatal VMS error at %s, line %d
(P) An error peculiar to VMS. Something untoward happened in a VMS system
You need to do an open() or a socket() call, or call a constructor from
the FileHandle package.
-=item Filehandle %s opened for only input
+=item Filehandle %s opened only for input
(W) You tried to write on a read-only filehandle. If you
intended it to be a read-write filehandle, you needed to open it with
you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
L<perlfunc/open>.
-=item Filehandle opened for only input
+=item Filehandle %s opened only for output
-(W) You tried to write on a read-only filehandle. If you
+(W) You tried to read from a filehandle opened only for writing. If you
intended it to be a read-write filehandle, you needed to open it with
"+E<lt>" or "+E<gt>" or "+E<gt>E<gt>" instead of with "E<lt>" or nothing. If
-you intended only to write the file, use "E<gt>" or "E<gt>E<gt>". See
+you intended only to read from the file, use "E<lt>". See
L<perlfunc/open>.
=item Final $ should be \$ or $name
=item Format %s redefined
-(W) You redefined a format. To suppress this warning, say
+(W) You redefined a format, perhaps accidentally. To suppress this warning,
+say
{
- local $^W = 0;
+ no warning;
eval "format NAME =...";
}
(S) A warning peculiar to VMS. The call to C<sys$getuai> underlying the
C<getpwnam> operator returned an invalid UIC.
-
=item Glob not terminated
(F) The lexer saw a left angle bracket in a place where it was expecting
(D) Really old Perl let you omit the % on hash names in some spots. This
is now heavily deprecated.
+=item Hexadecimal number > 0xffffffff non-portable
+
+(W) The hexadecimal number you specified is larger than 2**32-1
+(4294967295) and therefore non-portable between systems. See
+L<perlport> for more on portability concerns.
+
=item Identifier too long
(F) Perl limits identifiers (names for variables, functions, etc.) to
names (like C<$A::B>). You've exceeded Perl's limits. Future
versions of Perl are likely to eliminate these arbitrary limitations.
-=item Ill-formed logical name |%s| in prime_env_iter
+=item Ill-formed CRTL environ value "%s"
+
+(W) A warning peculiar to VMS. Perl tried to read the CRTL's internal
+environ array, and encountered an element without the C<=> delimiter
+used to spearate keys from values. The element is ignored.
+
+=item Ill-formed message in prime_env_iter: |%s|
-(W) A warning peculiar to VMS. A logical name was encountered when preparing
-to iterate over %ENV which violates the syntactic rules governing logical
-names. Because it cannot be translated normally, it is skipped, and will not
-appear in %ENV. This may be a benign occurrence, as some software packages
-might directly modify logical name tables and introduce nonstandard names,
-or it may indicate that a logical name table has been corrupted.
+(W) A warning peculiar to VMS. Perl tried to read a logical name
+or CLI symbol definition when preparing to iterate over %ENV, and
+didn't see the expected delimiter between key and value, so the
+line was ignored.
=item Illegal character %s (carriage return)
(F) You tried to divide a number by 0 to get the remainder. Most numbers
don't take to this kindly.
-=item Illegal octal digit
+=item Illegal binary digit %s
+
+(F) You used a digit other than 0 and 1 in a binary number.
+
+=item Illegal octal digit %s
(F) You used an 8 or 9 in a octal number.
-=item Illegal octal digit ignored
+=item Illegal binary digit %s ignored
+
+(W) You may have tried to use a digit other than 0 or 1 in a binary number.
+Interpretation of the binary number stopped before the offending digit.
+
+=item Illegal octal digit %s ignored
(W) You may have tried to use an 8 or 9 in a octal number. Interpretation
of the octal number stopped before the 8 or 9.
+=item Illegal hexadecimal digit %s ignored
+
+(W) You may have tried to use a character other than 0 - 9 or A - F, a - f
+in a hexadecimal number. Interpretation of the hexadecimal number stopped
+before the illegal character.
+
=item Illegal switch in PERL5OPT: %s
(X) The PERL5OPT environment variable may only be used to set the
script if C<$ENV{PATH}> contains a directory that is writable by the world.
See L<perlsec>.
-=item Insecure PATH
+=item Insecure $ENV{%s} while running %s
(F) You can't use system(), exec(), or a piped open in a setuid or
-setgid script if C<$ENV{PATH}> is derived from data supplied (or
+setgid script if any of C<$ENV{PATH}>, C<$ENV{IFS}>, C<$ENV{CDPATH}>,
+C<$ENV{ENV}> or C<$ENV{BASH_ENV}> are derived from data supplied (or
potentially supplied) by the user. The script must set the path to a
known value, using trustworthy data. See L<perlsec>.
-=item Integer overflow in hex number
-
-(S) The literal hex number you have specified is too big for your
-architecture. On a 32-bit architecture the largest hex literal is
-0xFFFFFFFF.
-
-=item Integer overflow in octal number
+=item Integer overflow in %s number
-(S) The literal octal number you have specified is too big for your
-architecture. On a 32-bit architecture the largest octal literal is
-037777777777.
+(W) The hexadecimal, octal or binary number you have specified either
+as a literal in your code or as a scalar is too big for your
+architecture, and has been converted to a floating point number. On a
+32-bit architecture the largest hexadecimal, octal or binary number
+representable without overflow is 0xFFFFFFFF, 037777777777, or
+0b11111111111111111111111111111111 respectively. Note that Perl
+transparently promotes all numbers to a floating point representation
+internally--subject to loss of precision errors in subsequent
+operations.
=item Internal inconsistency in tracking vforks
(S) A warning peculiar to VMS. Perl keeps track of the number
of times you've called C<fork> and C<exec>, to determine
whether the current call to C<exec> should affect the current
-script or a subprocess (see L<perlvms/exec>). Somehow, this count
+script or a subprocess (see L<perlvms/"exec LIST">). Somehow, this count
has become scrambled, so Perl is making a guess and treating
this C<exec> as a request to terminate the Perl script
and execute the specified command.
(P) Something went badly wrong in the regular expression parser.
-=item internal error: glob failed
+=item glob failed (%s)
-(P) Something went wrong with the external program(s) used for C<glob>
-and C<E<lt>*.cE<gt>>. This may mean that your csh (C shell) is
-broken. If so, you should change all of the csh-related variables in
-config.sh: If you have tcsh, make the variables refer to it as if it
-were csh (e.g. C<full_csh='/usr/bin/tcsh'>); otherwise, make them all
-empty (except that C<d_csh> should be C<'undef'>) so that Perl will
-think csh is missing. In either case, after editing config.sh, run
-C<./Configure -S> and rebuild Perl.
+(W) Something went wrong with the external program(s) used for C<glob>
+and C<E<lt>*.cE<gt>>. Usually, this means that you supplied a C<glob>
+pattern that caused the external program to fail and exit with a nonzero
+status. If the message indicates that the abnormal exit resulted in a
+coredump, this may also mean that your csh (C shell) is broken. If so,
+you should change all of the csh-related variables in config.sh: If you
+have tcsh, make the variables refer to it as if it were csh (e.g.
+C<full_csh='/usr/bin/tcsh'>); otherwise, make them all empty (except that
+C<d_csh> should be C<'undef'>) so that Perl will think csh is missing.
+In either case, after editing config.sh, run C<./Configure -S> and
+rebuild Perl.
=item internal urp in regexp at /%s/
that name, not even if you count where you were called from. See
L<perlfunc/last>.
+=item leaving effective %s failed
+
+(F) While under the C<use filetest> pragma, switching the real and
+effective uids or gids failed.
+
=item listen() on closed fd
(W) You tried to do a listen on a closed socket. Did you forget to check
(F) While certain functions allow you to specify a filehandle or an
"indirect object" before the argument list, this ain't one of them.
+=item Missing command in piped open
+
+(W) You used the C<open(FH, "| command")> or C<open(FH, "command |")>
+construction, but the command was missing or blank.
+
=item Missing operator before %s?
(S) This is an educated guess made in conjunction with the message "%s
found where operator expected". Often the missing operator is a comma.
-=item Missing right bracket
+=item Missing right curly or square bracket
-(F) The lexer counted more opening curly brackets (braces) than closing ones.
-As a general rule, you'll find it's missing near the place you were last
-editing.
+(F) The lexer counted more opening curly or square brackets than
+closing ones. As a general rule, you'll find it's missing near the place
+you were last editing.
=item Modification of a read-only value attempted
Another way is to assign to a substr() that's off the end of the string.
-=item Modification of noncreatable array value attempted, subscript %d
+=item Modification of non-creatable array value attempted, subscript %d
(F) You tried to make an array value spring into existence, and the
subscript was probably negative, even counting from end of the array
backwards.
-=item Modification of noncreatable hash value attempted, subscript "%s"
+=item Modification of non-creatable hash value attempted, subscript "%s"
-(F) You tried to make a hash value spring into existence, and it couldn't
+(P) You tried to make a hash value spring into existence, and it couldn't
be created for some peculiar reason.
=item Module name must be constant
(F) The argument to B<-I> must follow the B<-I> immediately with no
intervening space.
+=item No such array field
+
+(F) You tried to access an array as a hash, but the field name used is
+not defined. The hash at index 0 should map all valid field names to
+array indices for that to work.
+
+=item No such field "%s" in variable %s of type %s
+
+(F) You tried to access a field of a typed variable where the type
+does not know about the field name. The field names are looked up in
+the %FIELDS hash in the type package at compile time. The %FIELDS hash
+is usually set up with the 'fields' pragma.
+
=item No such pipe open
(P) An error peculiar to VMS. The internal routine my_pclose() tried to
(W) You specified a signal name as a subscript to %SIG that was not recognized.
Say C<kill -l> in your shell to see the valid signal names on your system.
+=item no UTC offset information; assuming local time is UTC
+
+(S) A warning peculiar to VMS. Perl was unable to find the local
+timezone offset, so it's assuming that local system time is equivalent
+to UTC. If it's not, define the logical name F<SYS$TIMEZONE_DIFFERENTIAL>
+to translate to the number of seconds which need to be added to UTC to
+get local time.
+
=item Not a CODE reference
(F) Perl was trying to evaluate a reference to a code value (that is, a
Perl are likely to eliminate this arbitrary limitation. In the meantime,
try using scientific notation (e.g. "1e6" instead of "1_000_000").
-=item Odd number of elements in hash list
+=item Octal number > 037777777777 non-portable
+
+(W) The octal number you specified is larger than 2**32-1 (4294967295)
+and therefore non-portable between systems. See L<perlport> for more
+on portability concerns.
+
+=item Odd number of elements in hash assignment
-(S) You specified an odd number of elements to a hash list, which is odd,
-because hash lists come in key/value pairs.
+(S) You specified an odd number of elements to initialize a hash, which
+is odd, because hashes come in key/value pairs.
=item Offset outside string
(S) An internal warning that the grammar is screwed up.
-=item Operation `%s': no method found,%s
+=item Operation `%s': no method found, %s
(F) An attempt was made to perform an overloaded operation for which
no handler was defined. While some handlers can be autogenerated in
(F) The yacc parser wanted to grow its stack so it could continue parsing,
but realloc() wouldn't give it more memory, virtual or otherwise.
-=item Out of memory!
+=item Out of memory during request for %s
(X|F) The malloc() function returned 0, indicating there was insufficient
remaining memory (or virtual memory) to satisfy the request.
an emergency pool after die()ing with this message. In this case the
error is trappable I<once>.
-=item Out of memory during request for %s
+=item Out of memory during "large" request for %s
(F) The malloc() function returned 0, indicating there was insufficient
remaining memory (or virtual memory) to satisfy the request. However,
the request was judged large enough (compile-time default is 64K), so
a possibility to shut down by trapping this error is granted.
+=item Out of memory during ridiculously large request
+
+(F) You can't allocate more than 2^31+"small amount" bytes. This error
+is most likely to be caused by a typo in the Perl program. e.g., C<$arr[time]>
+instead of C<$arr[$time]>.
+
=item page overflow
(W) A single call to write() produced more lines than can fit on a page.
(P) The savestack was requested to restore more localized values than there
are in the savestack.
+=item panic: del_backref
+
+(P) Failed an internal consistency check while trying to reset a weak
+reference.
+
=item panic: die %s
(P) We popped the context stack to an eval context, and then discovered
(P) The lexer got into a bad state parsing a string with brackets.
+=item panic: kid popen errno read
+
+(F) forked child returned an incomprehensible message about its errno.
+
=item panic: last
(P) We popped the context stack to a block context, and then discovered
(P) Something requested a negative number of bytes of malloc.
+=item panic: magic_killbackrefs
+
+(P) Failed an internal consistency check while trying to reset all weak
+references to an object.
+
=item panic: mapstart
(P) The compiler is screwed up with respect to the map() function.
(P) The lexer got into a bad state while processing a case modifier.
-=item Pareneses missing around "%s" list
+=item Parentheses missing around "%s" list
(W) You said something like
(F) The setuid emulator in suidperl decided you were up to no good.
-=item pid %d not a child
+=item pid %x not a child
(W) A warning peculiar to VMS. Waitpid() was asked to wait for a process which
isn't a subprocess of the current process. While this is fine from VMS'
(W) qw() lists contain items separated by whitespace; as with literal
strings, comment characters are not ignored, but are instead treated
as literal data. (You may have used different delimiters than the
-exclamation marks parentheses shown here; braces are also frequently
-used.)
+parentheses shown here; braces are also frequently used.)
You probably wrote something like this:
(S) The subroutine being declared or defined had previously been declared
or defined with a different function prototype.
-=item Read on closed filehandle E<lt>%sE<gt>
+=item Range iterator outside integer range
+
+(F) One (or both) of the numeric arguments to the range operator ".."
+are outside the range which can be represented by integers internally.
+One possible workaround is to force Perl to use magical string
+increment by prepending "0" to your numbers.
+
+=item Read on closed filehandle %s
(W) The filehandle you're reading from got itself closed sometime before now.
Check your logic flow.
desired output is compiled into Perl, which entails some overhead,
which is why it's currently left out of your copy.
-=item Recursive inheritance detected
+=item Recursive inheritance detected in package '%s'
(F) More than 100 levels of inheritance were used. Probably indicates
an unintended loop in your inheritance hierarchy.
+=item Recursive inheritance detected while looking for method '%s' in package '%s'
+
+(F) More than 100 levels of inheritance were encountered while invoking a
+method. Probably indicates an unintended loop in your inheritance hierarchy.
+
+=item Reference found where even-sized list expected
+
+(W) You gave a single reference where Perl was expecting a list with
+an even number of elements (for assignment to a hash). This
+usually means that you used the anon hash constructor when you meant
+to use parens. In any case, a hash requires key/value B<pairs>.
+
+ %hash = { one => 1, two => 2, }; # WRONG
+ %hash = [ qw/ an anon array / ]; # WRONG
+ %hash = ( one => 1, two => 2, ); # right
+ %hash = qw( one 1 two 2 ); # also fine
+
+=item Reference is already weak
+
+(W) You have attempted to weaken a reference that is already weak.
+Doing so has no effect.
+
=item Reference miscount in sv_replace()
(W) The internal sv_replace() function was handed a new SV with a
(P) A "can't happen" error, because safemalloc() should have caught it earlier.
-=item regexp too big
-
-(F) The current implementation of regular expressions uses shorts as
-address offsets within a string. Unfortunately this means that if
-the regular expression compiles to longer than 32767, it'll blow up.
-Usually when you want a regular expression this big, there is a better
-way to do it with multiple statements. See L<perlre>.
-
=item Reversed %s= operator
(W) You wrote your assignment operator backwards. The = must always
Check your logic flow.
=item Sequence (? incomplete
+
(F) A regular expression ended with an incomplete extension (?.
See L<perlre>.
server can't find it, basically, more or less. Please see the following
for more information:
- http://www.perl.com/perl/faq/idiots-guide.html
- http://www.perl.com/perl/faq/perl-cgi-faq.html
+ http://www.perl.com/CPAN/doc/FAQs/cgi/idiots-guide.html
+ http://www.perl.com/CPAN/doc/FAQs/cgi/perl-cgi-faq.html
ftp://rtfm.mit.edu/pub/usenet/news.answers/www/cgi-faq
http://hoohoo.ncsa.uiuc.edu/cgi/interface.html
http://www-genome.wi.mit.edu/WWW/faqs/www-security-faq.html
+You should also look at L<perlfaq9>.
+
=item setegid() not implemented
(F) You tried to assign to C<$)>, and your operating system doesn't support
which does return. To suppress this warning, put the exec() in a block
by itself.
+=item Strange *+?{} on zero-length expression
+
+(W) You applied a regular expression quantifier in a place where it
+makes no sense, such as on a zero-width assertion.
+Try putting the quantifier inside the assertion instead. For example,
+the way to match "abc" provided that it is followed by three
+repetitions of "xyz" is C</abc(?=(?:xyz){3})/>, not C</abc(?=xyz){3}/>.
+
=item Stub found while resolving method `%s' overloading `%s' in package `%s'
(P) Overloading resolution over @ISA tree may be broken by importation stubs.
=item Subroutine %s redefined
-(W) You redefined a subroutine. To suppress this warning, say
+(W) You redefined a subroutine, perhaps accidentally. To suppress this
+warning, say
{
- local $^W = 0;
+ no warning;
eval "sub name { ... }";
}
(F) Your Perl was compiled with B<-D>SETUID_SCRIPTS_ARE_SECURE_NOW, but a
version of the setuid emulator somehow got run anyway.
+=item switching effective %s is not implemented
+
+(F) While under the C<use filetest> pragma, we cannot switch the
+real and effective uids or gids.
+
=item syntax error
(F) Probably means you had a syntax error. Common reasons include:
instead of Perl. Check the #! line, or manually feed your script
into Perl yourself.
-=item System V IPC is not implemented on this machine
+=item System V %s is not implemented on this machine
-(F) You tried to do something with a function beginning with "sem", "shm",
-or "msg". See L<perlfunc/semctl>, for example.
+(F) You tried to do something with a function beginning with "sem",
+"shm", or "msg" but that System V IPC is not implemented in your
+machine. In some machines the functionality can exist but be
+unconfigured. Consult your system support.
=item Syswrite on closed filehandle
if the last stat that wrote to the stat buffer already went past
the symlink to get to the real file. Use an actual filename instead.
+=item This Perl can't reset CRTL eviron elements (%s)
+
+=item This Perl can't set CRTL environ elements (%s=%s)
+
+(W) Warnings peculiar to VMS. You tried to change or delete an element
+of the CRTL's internal environ array, but your copy of Perl wasn't
+built with a CRTL that contained the setenv() function. You'll need to
+rebuild Perl with a CRTL that does, or redefine F<PERL_ENV_TABLES> (see
+L<perlvms>) so that the environ array isn't the target of the change to
+%ENV which produced the warning.
+
=item times not implemented
(F) Your version of the C library apparently doesn't do times(). I suspect
(F) The regular expression ends with an unbackslashed backslash. Backslash
it. See L<perlre>.
-=item Translation pattern not terminated
+=item Transliteration pattern not terminated
(F) The lexer couldn't find the interior delimiter of a tr/// or tr[][]
or y/// or y[][] construct. Missing the leading C<$> from variables
C<$tr> or C<$y> may cause this error.
-=item Translation replacement not terminated
+=item Transliteration replacement not terminated
(F) The lexer couldn't find the final delimiter of a tr/// or tr[][]
construct.
=item umask: argument is missing initial 0
-(W) A umask of 222 is incorrect. It should be 0222, because octal literals
-always start with 0 in Perl, as in C.
+(W) A umask of 222 is incorrect. It should be 0222, because octal
+literals always start with 0 in Perl, as in C.
+
+=item umask not implemented
+
+(F) Your machine doesn't implement the umask function and you tried
+to use it to restrict permissions for yourself (EXPR & 0700).
=item Unable to create sub named "%s"
(F) The format indicated doesn't seem to exist. Perhaps it's really in
another package? See L<perlform>.
+=item Undefined value assigned to typeglob
+
+(W) An undefined value was assigned to a typeglob, a la C<*foo = undef>.
+This does nothing. It's possible that you really mean C<undef *foo>.
+
=item unexec of %s into %s failed!
(F) The unexec() routine failed for some reason. See your local FSF
(F) There are no byte-swapping functions for a machine with this byte order.
+=item Unknown open() mode '%s'
+
+(F) The second argument of 3-arguments open is not one from the list
+of C<L<lt>>, C<L<gt>>, C<E<gt>E<gt>>, C<+L<lt>>, C<+L<gt>>,
+C<+E<gt>E<gt>>, C<-|>, C<|-> of possible open() modes.
+
+=item Unknown process %x sent message to prime_env_iter: %s
+
+(P) An error peculiar to VMS. Perl was reading values for %ENV before
+iterating over it, and someone else stuck a message in the stream of
+data Perl expected. Someone's very confused, or perhaps trying to
+subvert Perl's population of %ENV for nefarious purposes.
+
=item unmatched () in regexp
(F) Unbackslashed parentheses must always be balanced in regular
expressions. If you're a vi user, the % key is valuable for finding
the matching parenthesis. See L<perlre>.
-=item Unmatched right bracket
+=item Unmatched right %s bracket
-(F) The lexer counted more closing curly brackets (braces) than opening
-ones, so you're probably missing an opening bracket. As a general
-rule, you'll find the missing one (so to speak) near the place you were
-last editing.
+(F) The lexer counted more closing curly or square brackets than
+opening ones, so you're probably missing a matching opening bracket.
+As a general rule, you'll find the missing one (so to speak) near the
+place you were last editing.
=item unmatched [] in regexp
in your Perl script (or eval). Perhaps you tried to run a compressed
script, a binary program, or a directory as a Perl program.
+=item Unrecognized escape \\%c passed through
+
+(W) You used a backslash-character combination which is not recognized
+by Perl.
+
=item Unrecognized signal name "%s"
(F) You specified a signal name to the kill() function that was not recognized.
=item Unsupported function %s
-(F) This machines doesn't implement the indicated function, apparently.
+(F) This machine doesn't implement the indicated function, apparently.
At least, Configure doesn't think so.
=item Unsupported socket function "%s" called
finding it. Chances are you left some needed parentheses out earlier in
the line, and you really meant a "less than".
-=item Use of "$$<digit>" to mean "${$}<digit>" is deprecated
-
-(D) Perl versions before 5.004 misinterpreted any type marker followed
-by "$" and a digit. For example, "$$0" was incorrectly taken to mean
-"${$}0" instead of "${$0}". This bug is (mostly) fixed in Perl 5.004.
-
-However, the developers of Perl 5.004 could not fix this bug completely,
-because at least two widely-used modules depend on the old meaning of
-"$$0" in a string. So Perl 5.004 still interprets "$$<digit>" in the
-old (broken) way inside strings; but it generates this message as a
-warning. And in Perl 5.005, this special treatment will cease.
-
=item Use of $# is deprecated
(D) This was an ill-advised attempt to emulate a poorly defined B<awk> feature.
(D) As an (ahem) accidental feature, C<AUTOLOAD> subroutines are looked
up as methods (using the C<@ISA> hierarchy) even when the subroutines to
be autoloaded were called as plain functions (e.g. C<Foo::bar()>), not
-as methods (e.g. C<Foo->bar()> or C<$obj->bar()>).
+as methods (e.g. C<Foo-E<gt>bar()> or C<$obj-E<gt>bar()>).
This bug will be rectified in Perl 5.005, which will use method lookup
only for methods' C<AUTOLOAD>s. However, there is a significant base
In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);> you
should remove AutoLoader from @ISA and change C<use AutoLoader;> to
-C<C<use AutoLoader 'AUTOLOAD';>.
+C<use AutoLoader 'AUTOLOAD';>.
+
+=item Use of reserved word "%s" is deprecated
+
+(D) The indicated bareword is a reserved word. Future versions of perl
+may use it as a keyword, so you're better off either explicitly quoting
+the word in a manner appropriate for its context of use, or using a
+different name altogether. The warning can be suppressed for subroutine
+names by either adding a C<&> prefix, or using a package qualifier,
+e.g. C<&our()>, or C<Foo::our()>.
=item Use of %s is deprecated
(W) An undefined value was used as if it were already defined. It was
interpreted as a "" or a 0, but maybe it was a mistake. To suppress this
-warning assign an initial value to your variables.
+warning assign a defined value to your variables.
+
+=item Useless use of "re" pragma
+
+(W) You did C<use re;> without any arguments. That isn't very useful.
=item Useless use of %s in void context
probably not what you intended. When using these constructs in conditional
expressions, test their values with the C<defined> operator.
+=item Value of CLI symbol "%s" too long
+
+(W) A warning peculiar to VMS. Perl tried to read the value of an %ENV
+element from a CLI symbol table, and found a resultant string longer
+than 1024 characters. The return value has been truncated to 1024
+characters.
+
=item Variable "%s" is not imported%s
(F) While "use strict" in effect, you referred to a global variable
So put in parentheses to say what you really mean.
-=item Write on closed filehandle
+=item Write on closed filehandle %s
(W) The filehandle you're writing to got itself closed sometime before now.
Check your logic flow.
https://perl5.git.perl.org / perl5.git / blobdiff