package DB;
# Debugger for Perl 5.00x; perl5db.pl patch level:
+$VERSION = 1.17;
+$header = "perl5db.pl version $VERSION";
-$VERSION = 1.14;
-$header = "perl5db.pl version $VERSION";
+# It is crucial that there is no lexicals in scope of `eval ""' down below
+sub eval {
+ # 'my' would make it visible from user code
+ # but so does local! --tchrist [... into @DB::res, not @res. IZ]
+ local @res;
+ {
+ local $otrace = $trace;
+ local $osingle = $single;
+ local $od = $^D;
+ { ($evalarg) = $evalarg =~ /(.*)/s; }
+ @res = eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug
+ $trace = $otrace;
+ $single = $osingle;
+ $^D = $od;
+ }
+ my $at = $@;
+ local $saved[0]; # Preserve the old value of $@
+ eval { &DB::save };
+ if ($at) {
+ local $\ = '';
+ print $OUT $at;
+ } elsif ($onetimeDump) {
+ if ($onetimeDump eq 'dump') {
+ local $option{dumpDepth} = $onetimedumpDepth
+ if defined $onetimedumpDepth;
+ dumpit($OUT, \@res);
+ } elsif ($onetimeDump eq 'methods') {
+ methods($res[0]) ;
+ }
+ }
+ @res;
+}
+# After this point it is safe to introduce lexicals
+# However, one should not overdo it: leave as much control from outside as possible
#
# This file is automatically included if you do perl -d.
# It's probably not useful to include this yourself.
#
+# Before venturing further into these twisty passages, it is
+# wise to read the perldebguts man page or risk the ire of dragons.
+#
# Perl supplies the values for %sub. It effectively inserts
-# a &DB'DB(); in front of every place that can have a
+# a &DB::DB(); in front of every place that can have a
# breakpoint. Instead of a subroutine call it calls &DB::sub with
# $DB::sub being the called subroutine. It also inserts a BEGIN
# {require 'perl5db.pl'} before the first line.
# if caller() is called from the package DB, it provides some
# additional data.
#
-# The array @{$main::{'_<'.$filename}} is the line-by-line contents of
-# $filename.
+# The array @{$main::{'_<'.$filename}} (herein called @dbline) is the
+# line-by-line contents of $filename.
#
-# The hash %{'_<'.$filename} contains breakpoints and action (it is
-# keyed by line number), and individual entries are settable (as
-# opposed to the whole hash). Only true/false is important to the
-# interpreter, though the values used by perl5db.pl have the form
-# "$break_condition\0$action". Values are magical in numeric context.
+# The hash %{'_<'.$filename} (herein called %dbline) contains
+# breakpoints and action (it is keyed by line number), and individual
+# entries are settable (as opposed to the whole hash). Only true/false
+# is important to the interpreter, though the values used by
+# perl5db.pl have the form "$break_condition\0$action". Values are
+# magical in numeric context.
#
# The scalar ${'_<'.$filename} contains $filename.
#
# I<CreateTTY> bits control attempts to create a new TTY on events:
# 1: on fork() 2: debugger is started inside debugger
# 4: on startup
-# c) Code to auto-create a new TTY window on OS/2 (currently one one
+# c) Code to auto-create a new TTY window on OS/2 (currently one
# extra window per session - need named pipes to have more...);
# d) Simplified interface for custom createTTY functions (with a backward
# compatibility hack); now returns the TTY name to use; return of ''
# cmd_b_line($lineno [, $cond]) # b lineno [cond]
# cmd_b_sub($sub [, $cond]) # b sub [cond]
# cmd_stop() # Control-C
-# cmd_d($lineno) # d lineno
+# cmd_d($lineno) # d lineno (B)
# The cmd_*() API returns FALSE on failure; in this case it outputs
# the error message to the debugging output.
# j) Low-level debugger API
# + Fixed warnings generated by "p 42" (Print expression)
# Changes: 1.13: Jun 19, 2001 Scott.L.Miller@compaq.com
# + Added windowSize option
+# Changes: 1.14: Oct 9, 2001 multiple
+# + Clean up after itself on VMS (Charles Lane in 12385)
+# + Adding "@ file" syntax (Peter Scott in 12014)
+# + Debug reloading selfloaded stuff (Ilya Zakharevich in 11457)
+# + $^S and other debugger fixes (Ilya Zakharevich in 11120)
+# + Forgot a my() declaration (Ilya Zakharevich in 11085)
+# Changes: 1.15: Nov 6, 2001 Michael G Schwern <schwern@pobox.com>
+# + Updated 1.14 change log
+# + Added *dbline explainatory comments
+# + Mentioning perldebguts man page
+# Changes: 1.16: Feb 15, 2002 Mark-Jason Dominus <mjd@plover.com>
+# + $onetimeDump improvements
+# Changes: 1.17: Feb 20, 2002 Richard Foley <richard.foley@rfi.net>
+# Moved some code to cmd_[.]()'s for clarity and ease of handling,
+# rationalised the following commands and added cmd_wrapper() to
+# enable switching between old and frighteningly consistent new
+# behaviours for diehards: 'o CommandSet=pre580' (sigh...)
+# a(add), A(del) # action expr (added del by line)
+# + b(add), B(del) # break [line] (was b,D)
+# + w(add), W(del) # watch expr (was W,W) added del by expr
+# + h(summary), h h(long) # help (hh) (was h h,h)
+# + m(methods), M(modules) # ... (was m,v)
+# + o(option) # lc (was O)
+# + v(view code), V(view Variables) # ... (was w,V)
+#
####################################################################
# Needed for the statement after exec():
# (local $^W cannot help - other packages!).
$inhibit_exit = $option{PrintRet} = 1;
-@options = qw(hashDepth arrayDepth DumpDBFiles DumpPackages DumpReused
+@options = qw(hashDepth arrayDepth CommandSet dumpDepth
+ DumpDBFiles DumpPackages DumpReused
compactDump veryCompact quote HighBit undefPrint
globPrint PrintRet UsageOnly frame AutoTrace
TTY noTTY ReadLine NonStop LineInfo maxTraceLen
%optionVars = (
hashDepth => \$dumpvar::hashDepth,
arrayDepth => \$dumpvar::arrayDepth,
+ CommandSet => \$CommandSet,
DumpDBFiles => \$dumpvar::dumpDBFiles,
DumpPackages => \$dumpvar::dumpPackages,
DumpReused => \$dumpvar::dumpReused,
$post = [] unless defined $post;
$pretype = [] unless defined $pretype;
$CreateTTY = 3 unless defined $CreateTTY;
+$CommandSet = '580' unless defined $CommandSet;
warnLevel($warnLevel);
dieLevel($dieLevel);
signalLevel($signalLevel);
-&pager(
- (defined($ENV{PAGER})
- ? $ENV{PAGER}
- : ($^O eq 'os2'
- ? 'cmd /c more'
- : 'more'))) unless defined $pager;
+pager(
+ defined $ENV{PAGER} ? $ENV{PAGER} :
+ eval { require Config } &&
+ defined $Config::Config{pager} ? $Config::Config{pager}
+ : 'more'
+ ) unless defined $pager;
setman();
&recallCommand("!") unless defined $prc;
&shellBang("!") unless defined $psh;
);
if (!$OUT) { die "Unable to connect to remote host: $remoteport\n"; }
$IN = $OUT;
- } elsif ($CreateTTY & 4) {
- create_IN_OUT(4);
} else {
- if (defined $console) {
+ create_IN_OUT(4) if $CreateTTY & 4;
+ if ($console) {
my ($i, $o) = split /,/, $console;
$o = $i unless defined $o;
open(IN,"+<$i") || open(IN,"<$i") || open(IN,"<&STDIN");
open(OUT,"+>$o") || open(OUT,">$o") || open(OUT,">&STDERR")
|| open(OUT,">&STDOUT"); # so we don't dongle stdout
- } else {
+ } elsif (not defined $console) {
open(IN,"<&STDIN");
open(OUT,">&STDERR") || open(OUT,">&STDOUT"); # so we don't dongle stdout
$console = 'STDIN/OUT';
}
# so open("|more") can read from STDOUT and so we don't dingle stdin
- $IN = \*IN;
-
- $OUT = \*OUT;
+ $IN = \*IN, $OUT = \*OUT if $console or not defined $console;
}
my $previous = select($OUT);
$| = 1; # for DB::OUT
$header =~ s/.Header: ([^,]+),v(\s+\S+\s+\S+).*$/$1$2/;
unless ($runnonstop) {
+ local $\ = '';
+ local $, = '';
if ($term_pid eq '-1') {
print $OUT "\nDaughter DB session started...\n";
} else {
$usercontext = '($@, $!, $^E, $,, $/, $\, $^W) = @saved;' .
"package $package;"; # this won't let them modify, alas
local(*dbline) = $main::{'_<' . $filename};
+
+ # we need to check for pseudofiles on Mac OS (these are files
+ # not attached to a filename, but instead stored in Dev:Pseudo)
+ if ($^O eq 'MacOS' && $#dbline < 0) {
+ $filename_ini = $filename = 'Dev:Pseudo';
+ *dbline = $main::{'_<' . $filename};
+ }
+
$max = $#dbline;
if ($dbline{$line} && (($stop,$action) = split(/\0/,$dbline{$line}))) {
- if ($stop eq '1') {
- $signal |= 1;
- } elsif ($stop) {
- $evalarg = "\$DB::signal |= 1 if do {$stop}"; &eval;
- $dbline{$line} =~ s/;9($|\0)/$1/;
- }
+ if ($stop eq '1') {
+ $signal |= 1;
+ } elsif ($stop) {
+ $evalarg = "\$DB::signal |= 1 if do {$stop}"; &eval;
+ $dbline{$line} =~ s/;9($|\0)/$1/;
+ }
}
my $was_signal = $signal;
if ($trace & 2) {
for (my $n = 0; $n <= $#to_watch; $n++) {
- $evalarg = $to_watch[$n];
- local $onetimeDump; # Do not output results
- my ($val) = &eval; # Fix context (&eval is doing array)?
- $val = ( (defined $val) ? "'$val'" : 'undef' );
- if ($val ne $old_watch[$n]) {
- $signal = 1;
- print $OUT <<EOP;
+ $evalarg = $to_watch[$n];
+ local $onetimeDump; # Do not output results
+ my ($val) = &eval; # Fix context (&eval is doing array)?
+ $val = ( (defined $val) ? "'$val'" : 'undef' );
+ if ($val ne $old_watch[$n]) {
+ $signal = 1;
+ print $OUT <<EOP;
Watchpoint $n:\t$to_watch[$n] changed:
- old value:\t$old_watch[$n]
- new value:\t$val
+ old value:\t$old_watch[$n]
+ new value:\t$val
EOP
- $old_watch[$n] = $val;
- }
+ $old_watch[$n] = $val;
+ }
}
}
if ($trace & 4) { # User-installed watch
$after = ($dbline[$line] =~ /\n$/ ? '' : "\n");
if (length($prefix) > 30) {
$position = "$prefix$line):\n$line:\t$dbline[$line]$after";
- $prefix = "";
- $infix = ":\t";
+ $prefix = "";
+ $infix = ":\t";
} else {
- $infix = "):\t";
- $position = "$prefix$line$infix$dbline[$line]$after";
+ $infix = "):\t";
+ $position = "$prefix$line$infix$dbline[$line]$after";
}
if ($frame) {
- print_lineinfo(' ' x $stack_depth, "$line:\t$dbline[$line]$after");
+ print_lineinfo(' ' x $stack_depth, "$line:\t$dbline[$line]$after");
} else {
- print_lineinfo($position);
+ print_lineinfo($position);
}
for ($i = $line + 1; $i <= $max && $dbline[$i] == 0; ++$i) { #{ vi
- last if $dbline[$i] =~ /^\s*[\;\}\#\n]/;
- last if $signal;
- $after = ($dbline[$i] =~ /\n$/ ? '' : "\n");
- $incr_pos = "$prefix$i$infix$dbline[$i]$after";
- $position .= $incr_pos;
- if ($frame) {
- print_lineinfo(' ' x $stack_depth, "$i:\t$dbline[$i]$after");
- } else {
- print_lineinfo($incr_pos);
- }
+ last if $dbline[$i] =~ /^\s*[\;\}\#\n]/;
+ last if $signal;
+ $after = ($dbline[$i] =~ /\n$/ ? '' : "\n");
+ $incr_pos = "$prefix$i$infix$dbline[$i]$after";
+ $position .= $incr_pos;
+ if ($frame) {
+ print_lineinfo(' ' x $stack_depth, "$i:\t$dbline[$i]$after");
+ } else {
+ print_lineinfo($incr_pos);
+ }
}
}
}
$evalarg = $action, &eval if $action;
if ($single || $was_signal) {
- local $level = $level + 1;
- foreach $evalarg (@$pre) {
- &eval;
- }
- print $OUT $stack_depth . " levels deep in subroutine calls!\n"
- if $single & 4;
- $start = $line;
- $incr = -1; # for backward motion.
- @typeahead = (@$pretype, @typeahead);
- CMD:
+ local $level = $level + 1;
+ foreach $evalarg (@$pre) {
+ &eval;
+ }
+ print $OUT $stack_depth . " levels deep in subroutine calls!\n"
+ if $single & 4;
+ $start = $line;
+ $incr = -1; # for backward motion.
+ @typeahead = (@$pretype, @typeahead);
+ CMD:
while (($term || &setterm),
($term_pid == $$ or resetterm(1)),
defined ($cmd=&readline("$pidprompt DB" . ('<' x $level) .
- ($#hist+1) . ('>' x $level) .
- " ")))
+ ($#hist+1) . ('>' x $level) . " ")))
{
$single = 0;
$signal = 0;
$cmd =~ s/\s+$//s; # trim annoying trailing whitespace
($i) = split(/\s+/,$cmd);
if ($alias{$i}) {
- # squelch the sigmangler
- local $SIG{__DIE__};
- local $SIG{__WARN__};
- eval "\$cmd =~ $alias{$i}";
- if ($@) {
- print $OUT "Couldn't evaluate `$i' alias: $@";
- next CMD;
- }
+ # squelch the sigmangler
+ local $SIG{__DIE__};
+ local $SIG{__WARN__};
+ eval "\$cmd =~ $alias{$i}";
+ if ($@) {
+ local $\ = '';
+ print $OUT "Couldn't evaluate `$i' alias: $@";
+ next CMD;
+ }
}
- $cmd =~ /^q$/ && ($fall_off_end = 1) && clean_ENV() && exit $?;
- $cmd =~ /^h$/ && do {
- print_help($help);
- next CMD; };
- $cmd =~ /^h\s+h$/ && do {
- print_help($summary);
- next CMD; };
- # support long commands; otherwise bogus errors
- # happen when you ask for h on <CR> for example
- $cmd =~ /^h\s+(\S.*)$/ && do {
- my $asked = $1; # for proper errmsg
- my $qasked = quotemeta($asked); # for searching
- # XXX: finds CR but not <CR>
- if ($help =~ /^<?(?:[IB]<)$qasked/m) {
- while ($help =~ /^(<?(?:[IB]<)$qasked([\s\S]*?)\n)(?!\s)/mg) {
- print_help($1);
- }
- } else {
- print_help("B<$asked> is not a debugger command.\n");
- }
- next CMD; };
+ $cmd =~ /^q$/ && do {
+ $fall_off_end = 1;
+ clean_ENV();
+ exit $?;
+ };
$cmd =~ /^t$/ && do {
$trace ^= 1;
+ local $\ = '';
print $OUT "Trace = " .
(($trace & 1) ? "on" : "off" ) . "\n";
next CMD; };
$cmd =~ /^S(\s+(!)?(.+))?$/ && do {
$Srev = defined $2; $Spatt = $3; $Snocheck = ! defined $1;
+ local $\ = '';
+ local $, = '';
foreach $subname (sort(keys %sub)) {
if ($Snocheck or $Srev^($subname =~ /$Spatt/)) {
print $OUT $subname,"\n";
}
}
next CMD; };
- $cmd =~ /^v$/ && do {
- list_versions(); next CMD};
$cmd =~ s/^X\b/V $package/;
$cmd =~ /^V$/ && do {
$cmd = "V $package"; };
local $frame = 0;
local $doret = -2;
# must detect sigpipe failures
- eval { &main::dumpvar($packname,@vars) };
+ eval { &main::dumpvar($packname,
+ defined $option{dumpDepth}
+ ? $option{dumpDepth} : -1,
+ @vars) };
if ($@) {
die unless $@ =~ /dumpvar print failed/;
}
select ($savout);
next CMD; };
$cmd =~ s/^x\b/ / && do { # So that will be evaled
- $onetimeDump = 'dump'; };
+ $onetimeDump = 'dump';
+ # handle special "x 3 blah" syntax
+ if ($cmd =~ s/^\s*(\d+)(?=\s)/ /) {
+ $onetimedumpDepth = $1;
+ }
+ };
$cmd =~ s/^m\s+([\w:]+)\s*$/ / && do {
methods($1); next CMD};
$cmd =~ s/^m\b/ / && do { # So this will be evaled
$file = $1;
$file =~ s/\s+$//;
if (!$file) {
- print $OUT "The old f command is now the r command.\n";
+ print $OUT "The old f command is now the r command.\n"; # hint
print $OUT "The new f command switches filenames.\n";
next CMD;
}
next CMD;
}
};
- $cmd =~ s/^l\s+-\s*$/-/;
- $cmd =~ /^([lb])\b\s*(\$.*)/s && do {
- $evalarg = $2;
- my ($s) = &eval;
- print($OUT "Error: $@\n"), next CMD if $@;
- $s = CvGV_name($s);
- print($OUT "Interpreted as: $1 $s\n");
- $cmd = "$1 $s";
- };
- $cmd =~ /^l\b\s*([\':A-Za-z_][\':\w]*(\[.*\])?)/s && do {
- my $s = $subname = $1;
- $subname =~ s/\'/::/;
- $subname = $package."::".$subname
- unless $subname =~ /::/;
- $subname = "CORE::GLOBAL::$s"
- if not defined &$subname and $s !~ /::/
- and defined &{"CORE::GLOBAL::$s"};
- $subname = "main".$subname if substr($subname,0,2) eq "::";
- @pieces = split(/:/,find_sub($subname) || $sub{$subname});
- $subrange = pop @pieces;
- $file = join(':', @pieces);
- if ($file ne $filename) {
- print $OUT "Switching to file '$file'.\n"
- unless $slave_editor;
- *dbline = $main::{'_<' . $file};
- $max = $#dbline;
- $filename = $file;
- }
- if ($subrange) {
- if (eval($subrange) < -$window) {
- $subrange =~ s/-.*/+/;
- }
- $cmd = "l $subrange";
- } else {
- print $OUT "Subroutine $subname not found.\n";
- next CMD;
- } };
$cmd =~ /^\.$/ && do {
$incr = -1; # for backward motion.
$start = $line;
$max = $#dbline;
print_lineinfo($position);
next CMD };
- $cmd =~ /^w\b\s*(\d*)$/ && do {
- $incr = $window - 1;
- $start = $1 if $1;
- $start -= $preview;
- #print $OUT 'l ' . $start . '-' . ($start + $incr);
- $cmd = 'l ' . $start . '-' . ($start + $incr); };
$cmd =~ /^-$/ && do {
$start -= $incr + $window + 1;
$start = 1 if $start <= 0;
$incr = $window - 1;
$cmd = 'l ' . ($start) . '+'; };
- $cmd =~ /^l$/ && do {
- $incr = $window - 1;
- $cmd = 'l ' . $start . '-' . ($start + $incr); };
- $cmd =~ /^l\b\s*(\d*)\+(\d*)$/ && do {
- $start = $1 if $1;
- $incr = $2;
- $incr = $window - 1 unless $incr;
- $cmd = 'l ' . $start . '-' . ($start + $incr); };
- $cmd =~ /^l\b\s*((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/ && do {
- $end = (!defined $2) ? $max : ($4 ? $4 : $2);
- $end = $max if $end > $max;
- $i = $2;
- $i = $line if $i eq '.';
- $i = 1 if $i < 1;
- $incr = $end - $i;
- if ($slave_editor) {
- print $OUT "\032\032$filename:$i:0\n";
- $i = $end;
- } else {
- for (; $i <= $end; $i++) {
- my ($stop,$action);
- ($stop,$action) = split(/\0/, $dbline{$i}) if
- $dbline{$i};
- $arrow = ($i==$line
- and $filename eq $filename_ini)
- ? '==>'
- : ($dbline[$i]+0 ? ':' : ' ') ;
- $arrow .= 'b' if $stop;
- $arrow .= 'a' if $action;
- print $OUT "$i$arrow\t", $dbline[$i];
- $i++, last if $signal;
- }
- print $OUT "\n" unless $dbline[$i-1] =~ /\n$/;
- }
- $start = $i; # remember in case they want more
- $start = $max if $start > $max;
- next CMD; };
- $cmd =~ /^D$/ && do {
- print $OUT "Deleting all breakpoints...\n";
- my $file;
- for $file (keys %had_breakpoints) {
- local *dbline = $main::{'_<' . $file};
- my $max = $#dbline;
- my $was;
-
- for ($i = 1; $i <= $max ; $i++) {
- if (defined $dbline{$i}) {
- $dbline{$i} =~ s/^[^\0]+//;
- if ($dbline{$i} =~ s/^\0?$//) {
- delete $dbline{$i};
- }
- }
- }
-
- if (not $had_breakpoints{$file} &= ~1) {
- delete $had_breakpoints{$file};
- }
- }
- undef %postponed;
- undef %postponed_file;
- undef %break_on_load;
- next CMD; };
- $cmd =~ /^L$/ && do {
- my $file;
- for $file (keys %had_breakpoints) {
- local *dbline = $main::{'_<' . $file};
- my $max = $#dbline;
- my $was;
-
- for ($i = 1; $i <= $max; $i++) {
- if (defined $dbline{$i}) {
- print $OUT "$file:\n" unless $was++;
- print $OUT " $i:\t", $dbline[$i];
- ($stop,$action) = split(/\0/, $dbline{$i});
- print $OUT " break if (", $stop, ")\n"
- if $stop;
- print $OUT " action: ", $action, "\n"
- if $action;
- last if $signal;
- }
- }
- }
- if (%postponed) {
- print $OUT "Postponed breakpoints in subroutines:\n";
- my $subname;
- for $subname (keys %postponed) {
- print $OUT " $subname\t$postponed{$subname}\n";
- last if $signal;
- }
- }
- my @have = map { # Combined keys
- keys %{$postponed_file{$_}}
- } keys %postponed_file;
- if (@have) {
- print $OUT "Postponed breakpoints in files:\n";
- my ($file, $line);
- for $file (keys %postponed_file) {
- my $db = $postponed_file{$file};
- print $OUT " $file:\n";
- for $line (sort {$a <=> $b} keys %$db) {
- print $OUT " $line:\n";
- my ($stop,$action) = split(/\0/, $$db{$line});
- print $OUT " break if (", $stop, ")\n"
- if $stop;
- print $OUT " action: ", $action, "\n"
- if $action;
- last if $signal;
- }
- last if $signal;
- }
- }
- if (%break_on_load) {
- print $OUT "Breakpoints on load:\n";
- my $file;
- for $file (keys %break_on_load) {
- print $OUT " $file\n";
- last if $signal;
- }
- }
- if ($trace & 2) {
- print $OUT "Watch-expressions:\n";
- my $expr;
- for $expr (@to_watch) {
- print $OUT " $expr\n";
- last if $signal;
- }
- }
- next CMD; };
- $cmd =~ /^b\b\s*load\b\s*(.*)/ && do {
- my $file = $1; $file =~ s/\s+$//;
- cmd_b_load($file);
- next CMD; };
- $cmd =~ /^b\b\s*(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/ && do {
- my $cond = length $3 ? $3 : '1';
- my ($subname, $break) = ($2, $1 eq 'postpone');
- $subname =~ s/\'/::/g;
- $subname = "${'package'}::" . $subname
- unless $subname =~ /::/;
- $subname = "main".$subname if substr($subname,0,2) eq "::";
- $postponed{$subname} = $break
- ? "break +0 if $cond" : "compile";
- next CMD; };
- $cmd =~ /^b\b\s*([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/ && do {
- $subname = $1;
- $cond = length $2 ? $2 : '1';
- cmd_b_sub($subname, $cond);
- next CMD; };
- $cmd =~ /^b\b\s*(\d*)\s*(.*)/ && do {
- $i = $1 || $line;
- $cond = length $2 ? $2 : '1';
- cmd_b_line($i, $cond);
- next CMD; };
- $cmd =~ /^d\b\s*(\d*)/ && do {
- cmd_d($1 || $line);
- next CMD; };
- $cmd =~ /^A$/ && do {
- print $OUT "Deleting all actions...\n";
- my $file;
- for $file (keys %had_breakpoints) {
- local *dbline = $main::{'_<' . $file};
- my $max = $#dbline;
- my $was;
-
- for ($i = 1; $i <= $max ; $i++) {
- if (defined $dbline{$i}) {
- $dbline{$i} =~ s/\0[^\0]*//;
- delete $dbline{$i} if $dbline{$i} eq '';
- }
- }
-
- unless ($had_breakpoints{$file} &= ~2) {
- delete $had_breakpoints{$file};
- }
- }
- next CMD; };
- $cmd =~ /^O\s*$/ && do {
- for (@options) {
- &dump_option($_);
- }
- next CMD; };
- $cmd =~ /^O\s*(\S.*)/ && do {
- parse_options($1);
- next CMD; };
- $cmd =~ /^\<\<\s*(.*)/ && do { # \<\< for CPerl sake: not HERE
+ # rjsf ->
+ $cmd =~ /^([aAbBDhlLMoOvwW])\b\s*(.*)/s && do {
+ &cmd_wrapper($1, $2, $line);
+ next CMD;
+ };
+ # <- rjsf
+ $cmd =~ /^\<\<\s*(.*)/ && do { # \<\< for CPerl sake: not HERE
push @$pre, action($1);
next CMD; };
$cmd =~ /^>>\s*(.*)/ && do {
}
$pretype = [$1];
next CMD; };
- $cmd =~ /^a\b\s*(\d*)\s*(.*)/ && do {
- $i = $1 || $line; $j = $2;
- if (length $j) {
- if ($dbline[$i] == 0) {
- print $OUT "Line $i may not have an action.\n";
- } else {
- $had_breakpoints{$filename} |= 2;
- $dbline{$i} =~ s/\0[^\0]*//;
- $dbline{$i} .= "\0" . action($j);
- }
- } else {
- $dbline{$i} =~ s/\0[^\0]*//;
- delete $dbline{$i} if $dbline{$i} eq '';
- }
- next CMD; };
- $cmd =~ /^n$/ && do {
+ $cmd =~ /^n$/ && do {
end_report(), next CMD if $finished and $level <= 1;
$single = 2;
$laststep = $cmd;
# sub-session anyway...
# local $filename = $filename;
# local *dbline = *dbline; # XXX Would this work?!
- if ($i =~ /\D/) { # subroutine name
+ if ($subname =~ /\D/) { # subroutine name
$subname = $package."::".$subname
unless $subname =~ /::/;
($file,$i) = (find_sub($subname) =~ /^(.*):(.*)$/);
for (@ini_INC) {
push @flags, '-I', $_;
}
+ push @flags, '-T' if ${^TAINT};
# Arrange for setting the old INC:
set_list("PERLDB_INC", @ini_INC);
if ($0 eq '-e') {
$cmd =~ /^T$/ && do {
print_trace($OUT, 1); # skip DB
next CMD; };
- $cmd =~ /^W\s*$/ && do {
- $trace &= ~2;
- @to_watch = @old_watch = ();
- next CMD; };
- $cmd =~ /^W\b\s*(.*)/s && do {
- push @to_watch, $1;
- $evalarg = $1;
- my ($val) = &eval;
- $val = (defined $val) ? "'$val'" : 'undef' ;
- push @old_watch, $val;
- $trace |= 2;
- next CMD; };
+ $cmd =~ /^w\b\s*(.*)/s && do { &cmd_w($1); next CMD; };
+ $cmd =~ /^W\b\s*(.*)/s && do { &cmd_W($1); next CMD; };
$cmd =~ /^\/(.*)$/ && do {
$inpat = $1;
$inpat =~ s:([^\\])/$:$1:;
my @keys;
if (length $cmd == 0) {
@keys = sort keys %alias;
- }
- elsif (my($k,$v) = ($cmd =~ /^(\S+)\s+(\S.*)/)) {
+ } elsif (my($k,$v) = ($cmd =~ /^(\S+)\s+(\S.*)/)) {
# can't use $_ or kill //g state
for my $x ($k, $v) { $x =~ s/\a/\\a/g }
$alias{$k} = "s\a$k\a$v\a";
next CMD;
}
@keys = ($k);
- }
- else {
+ } else {
@keys = ($cmd);
}
for my $k (@keys) {
$cmd =~ /^\@\s*(.*\S)/ && do {
if (open my $fh, $1) {
push @cmdfhs, $fh;
- }
- else {
+ } else {
&warn("Can't execute `$1': $!\n");
}
next CMD; };
$evalarg = "\$^D = \$^D | \$DB::db_stop;\n$cmd"; &eval;
if ($onetimeDump) {
$onetimeDump = undef;
+ $onetimedumpDepth = undef;
} elsif ($term_pid == $$) {
print $OUT "\n";
}
$piped= "";
}
} # CMD:
- $fall_off_end = 1 unless defined $cmd; # Emulate `q' on EOF
+ $fall_off_end = 1 unless defined $cmd; # Emulate `q' on EOF
foreach $evalarg (@$post) {
&eval;
}
print_trace($LINEINFO, -1, 1, 1, "$sub$al") )
: print_lineinfo(' ' x $stack_depth, "exited $sub$al\n")) if $frame & 2;
if ($doret eq $stack_depth or $frame & 16) {
+ local $\ = '';
my $fh = ($doret eq $stack_depth ? $OUT : $LINEINFO);
print $fh ' ' x $stack_depth if $frame & 16;
print $fh "list context return from $sub:\n";
print_trace($LINEINFO, -1, 1, 1, "$sub$al") )
: print_lineinfo(' ' x $stack_depth, "exited $sub$al\n")) if $frame & 2;
if ($doret eq $stack_depth or $frame & 16 and defined wantarray) {
+ local $\ = '';
my $fh = ($doret eq $stack_depth ? $OUT : $LINEINFO);
print $fh (' ' x $stack_depth) if $frame & 16;
print $fh (defined wantarray
### returns FALSE on error.
### User-interface functions cmd_* output error message.
+### Note all cmd_[a-zA-Z]'s require $line, $dblineno as first arguments
+
+my %set = ( #
+ 'pre580' => {
+ 'a' => 'pre580_a',
+ 'A' => 'pre580_null',
+ 'b' => 'pre580_b',
+ 'B' => 'pre580_null',
+ 'd' => 'pre580_null',
+ 'D' => 'pre580_D',
+ 'h' => 'pre580_h',
+ 'M' => 'pre580_null',
+ 'O' => 'o',
+ 'o' => 'pre580_null',
+ 'v' => 'M',
+ 'w' => 'v',
+ 'W' => 'pre580_W',
+ },
+);
+
+sub cmd_wrapper {
+ my $cmd = shift;
+ my $line = shift;
+ my $dblineno = shift;
+
+ # with this level of indirection we can wrap
+ # to old (pre580) or other command sets easily
+ #
+ my $call = 'cmd_'.(
+ $set{$CommandSet}{$cmd} || $cmd
+ );
+ # print "rjsf: cmd_wrapper($cmd): $CommandSet($set{$CommandSet}{$cmd}) => call($call)\n";
+
+ return &$call($line, $dblineno);
+}
+
+sub cmd_a {
+ my $line = shift || ''; # [.|line] expr
+ my $dbline = shift; $line =~ s/^(\.|(?:[^\d]))/$dbline/;
+ if ($line =~ /^\s*(\d*)\s*(\S.+)/) {
+ my ($lineno, $expr) = ($1, $2);
+ if (length $expr) {
+ if ($dbline[$lineno] == 0) {
+ print $OUT "Line $lineno($dbline[$lineno]) does not have an action?\n";
+ } else {
+ $had_breakpoints{$filename} |= 2;
+ $dbline{$lineno} =~ s/\0[^\0]*//;
+ $dbline{$lineno} .= "\0" . action($expr);
+ }
+ }
+ } else {
+ print $OUT "Adding an action requires an optional lineno and an expression\n"; # hint
+ }
+}
+
+sub cmd_A {
+ my $line = shift || '';
+ my $dbline = shift; $line =~ s/^\./$dbline/;
+ if ($line eq '*') {
+ eval { &delete_action(); 1 } or print $OUT $@ and return;
+ } elsif ($line =~ /^(\S.*)/) {
+ eval { &delete_action($1); 1 } or print $OUT $@ and return;
+ } else {
+ print $OUT "Deleting an action requires a line number, or '*' for all\n"; # hint
+ }
+}
+
+sub delete_action {
+ my $i = shift;
+ if (defined($i)) {
+ die "Line $i has no action .\n" if $dbline[$i] == 0;
+ $dbline{$i} =~ s/\0[^\0]*//; # \^a
+ delete $dbline{$i} if $dbline{$i} eq '';
+ } else {
+ print $OUT "Deleting all actions...\n";
+ for my $file (keys %had_breakpoints) {
+ local *dbline = $main::{'_<' . $file};
+ my $max = $#dbline;
+ my $was;
+ for ($i = 1; $i <= $max ; $i++) {
+ if (defined $dbline{$i}) {
+ $dbline{$i} =~ s/\0[^\0]*//;
+ delete $dbline{$i} if $dbline{$i} eq '';
+ }
+ unless ($had_breakpoints{$file} &= ~2) {
+ delete $had_breakpoints{$file};
+ }
+ }
+ }
+ }
+}
+
+sub cmd_b {
+ my $line = shift; # [.|line] [cond]
+ my $dbline = shift; $line =~ s/^\./$dbline/;
+ if ($line =~ /^\s*$/) {
+ &cmd_b_line($dbline, 1);
+ } elsif ($line =~ /^load\b\s*(.*)/) {
+ my $file = $1; $file =~ s/\s+$//;
+ &cmd_b_load($file);
+ } elsif ($line =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/) {
+ my $cond = length $3 ? $3 : '1';
+ my ($subname, $break) = ($2, $1 eq 'postpone');
+ $subname =~ s/\'/::/g;
+ $subname = "${'package'}::" . $subname unless $subname =~ /::/;
+ $subname = "main".$subname if substr($subname,0,2) eq "::";
+ $postponed{$subname} = $break ? "break +0 if $cond" : "compile";
+ } elsif ($line =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/) {
+ $subname = $1;
+ $cond = length $2 ? $2 : '1';
+ &cmd_b_sub($subname, $cond);
+ } elsif ($line =~ /^(\d*)\s*(.*)/) {
+ $line = $1 || $dbline;
+ $cond = length $2 ? $2 : '1';
+ &cmd_b_line($line, $cond);
+ } else {
+ print "confused by line($line)?\n";
+ }
+}
+
sub break_on_load {
my $file = shift;
$break_on_load{$file} = 1;
}
break_on_load($_) for @files;
@files = report_break_on_load;
+ local $\ = '';
+ local $" = ' ';
print $OUT "Will stop on load of `@files'.\n";
}
}
sub cmd_b_line {
- eval { break_on_line(@_); 1 } or print $OUT $@ and return;
+ eval { break_on_line(@_); 1 } or do {
+ local $\ = '';
+ print $OUT $@ and return;
+ };
}
sub break_on_filename_line {
if not defined &$subname and $s !~ /::/ and defined &{"CORE::GLOBAL::$s"};
$subname = "main".$subname if substr($subname,0,2) eq "::";
}
- eval { break_subroutine($subname,$cond); 1 } or print $OUT $@ and return;
+ eval { break_subroutine($subname,$cond); 1 } or do {
+ local $\ = '';
+ print $OUT $@ and return;
+ }
}
-sub cmd_stop { # As on ^C, but not signal-safy.
- $signal = 1;
+sub cmd_B {
+ my $line = ($_[0] =~ /^\./) ? $dbline : shift || '';
+ my $dbline = shift; $line =~ s/^\./$dbline/;
+ if ($line eq '*') {
+ eval { &delete_breakpoint(); 1 } or print $OUT $@ and return;
+ } elsif ($line =~ /^(\S.*)/) {
+ eval { &delete_breakpoint($line || $dbline); 1 } or do {
+ local $\ = '';
+ print $OUT $@ and return;
+ };
+ } else {
+ print $OUT "Deleting a breakpoint requires a line number, or '*' for all\n"; # hint
+ }
}
sub delete_breakpoint {
my $i = shift;
- die "Line $i not breakable.\n" if $dbline[$i] == 0;
- $dbline{$i} =~ s/^[^\0]*//;
- delete $dbline{$i} if $dbline{$i} eq '';
+ if (defined($i)) {
+ die "Line $i not breakable.\n" if $dbline[$i] == 0;
+ $dbline{$i} =~ s/^[^\0]*//;
+ delete $dbline{$i} if $dbline{$i} eq '';
+ } else {
+ print $OUT "Deleting all breakpoints...\n";
+ for my $file (keys %had_breakpoints) {
+ local *dbline = $main::{'_<' . $file};
+ my $max = $#dbline;
+ my $was;
+ for ($i = 1; $i <= $max ; $i++) {
+ if (defined $dbline{$i}) {
+ $dbline{$i} =~ s/^[^\0]+//;
+ if ($dbline{$i} =~ s/^\0?$//) {
+ delete $dbline{$i};
+ }
+ }
+ }
+ if (not $had_breakpoints{$file} &= ~1) {
+ delete $had_breakpoints{$file};
+ }
+ }
+ undef %postponed;
+ undef %postponed_file;
+ undef %break_on_load;
+ }
}
-sub cmd_d {
- my $i = shift;
- eval { delete_breakpoint $i; 1 } or print $OUT $@ and return;
+sub cmd_stop { # As on ^C, but not signal-safy.
+ $signal = 1;
+}
+
+sub cmd_h {
+ my $line = shift || '';
+ if ($line =~ /^h\s*/) {
+ print_help($help);
+ } elsif ($line =~ /^(\S.*)$/) {
+ # support long commands; otherwise bogus errors
+ # happen when you ask for h on <CR> for example
+ my $asked = $1; # for proper errmsg
+ my $qasked = quotemeta($asked); # for searching
+ # XXX: finds CR but not <CR>
+ if ($help =~ /^<?(?:[IB]<)$qasked/m) {
+ while ($help =~ /^(<?(?:[IB]<)$qasked([\s\S]*?)\n)(?!\s)/mg) {
+ print_help($1);
+ }
+ } else {
+ print_help("B<$asked> is not a debugger command.\n");
+ }
+ } else {
+ print_help($summary);
+ }
+}
+
+sub cmd_l {
+ my $line = shift;
+ $line =~ s/^-\s*$/-/;
+ if ($line =~ /^(\$.*)/s) {
+ $evalarg = $2;
+ my ($s) = &eval;
+ print($OUT "Error: $@\n"), next CMD if $@;
+ $s = CvGV_name($s);
+ print($OUT "Interpreted as: $1 $s\n");
+ $line = "$1 $s";
+ &cmd_l($s);
+ } elsif ($line =~ /^([\':A-Za-z_][\':\w]*(\[.*\])?)/s) {
+ my $s = $subname = $1;
+ $subname =~ s/\'/::/;
+ $subname = $package."::".$subname
+ unless $subname =~ /::/;
+ $subname = "CORE::GLOBAL::$s"
+ if not defined &$subname and $s !~ /::/
+ and defined &{"CORE::GLOBAL::$s"};
+ $subname = "main".$subname if substr($subname,0,2) eq "::";
+ @pieces = split(/:/,find_sub($subname) || $sub{$subname});
+ $subrange = pop @pieces;
+ $file = join(':', @pieces);
+ if ($file ne $filename) {
+ print $OUT "Switching to file '$file'.\n"
+ unless $slave_editor;
+ *dbline = $main::{'_<' . $file};
+ $max = $#dbline;
+ $filename = $file;
+ }
+ if ($subrange) {
+ if (eval($subrange) < -$window) {
+ $subrange =~ s/-.*/+/;
+ }
+ $line = $subrange;
+ &cmd_l($subrange);
+ } else {
+ print $OUT "Subroutine $subname not found.\n";
+ }
+ } elsif ($line =~ /^\s*$/) {
+ $incr = $window - 1;
+ $line = $start . '-' . ($start + $incr);
+ &cmd_l($line);
+ } elsif ($line =~ /^(\d*)\+(\d*)$/) {
+ $start = $1 if $1;
+ $incr = $2;
+ $incr = $window - 1 unless $incr;
+ $line = $start . '-' . ($start + $incr);
+ &cmd_l($line);
+ } elsif ($line =~ /^((-?[\d\$\.]+)([-,]([\d\$\.]+))?)?/) {
+ $end = (!defined $2) ? $max : ($4 ? $4 : $2);
+ $end = $max if $end > $max;
+ $i = $2;
+ $i = $line if $i eq '.';
+ $i = 1 if $i < 1;
+ $incr = $end - $i;
+ if ($slave_editor) {
+ print $OUT "\032\032$filename:$i:0\n";
+ $i = $end;
+ } else {
+ for (; $i <= $end; $i++) {
+ my ($stop,$action);
+ ($stop,$action) = split(/\0/, $dbline{$i}) if
+ $dbline{$i};
+ $arrow = ($i==$line
+ and $filename eq $filename_ini)
+ ? '==>'
+ : ($dbline[$i]+0 ? ':' : ' ') ;
+ $arrow .= 'b' if $stop;
+ $arrow .= 'a' if $action;
+ print $OUT "$i$arrow\t", $dbline[$i];
+ $i++, last if $signal;
+ }
+ print $OUT "\n" unless $dbline[$i-1] =~ /\n$/;
+ }
+ $start = $i; # remember in case they want more
+ $start = $max if $start > $max;
+ }
+}
+
+sub cmd_L {
+ my $arg = shift || 'abw'; $arg = 'abw' unless $CommandSet eq '580'; # sigh...
+ my $action_wanted = ($arg =~ /a/) ? 1 : 0;
+ my $break_wanted = ($arg =~ /b/) ? 1 : 0;
+ my $watch_wanted = ($arg =~ /w/) ? 1 : 0;
+
+ if ($break_wanted or $action_wanted) {
+ for my $file (keys %had_breakpoints) {
+ local *dbline = $main::{'_<' . $file};
+ my $max = $#dbline;
+ my $was;
+ for ($i = 1; $i <= $max; $i++) {
+ if (defined $dbline{$i}) {
+ print $OUT "$file:\n" unless $was++;
+ print $OUT " $i:\t", $dbline[$i];
+ ($stop,$action) = split(/\0/, $dbline{$i});
+ print $OUT " break if (", $stop, ")\n"
+ if $stop and $break_wanted;
+ print $OUT " action: ", $action, "\n"
+ if $action and $action_wanted;
+ last if $signal;
+ }
+ }
+ }
+ }
+ if (%postponed and $break_wanted) {
+ print $OUT "Postponed breakpoints in subroutines:\n";
+ my $subname;
+ for $subname (keys %postponed) {
+ print $OUT " $subname\t$postponed{$subname}\n";
+ last if $signal;
+ }
+ }
+ my @have = map { # Combined keys
+ keys %{$postponed_file{$_}}
+ } keys %postponed_file;
+ if (@have and ($break_wanted or $action_wanted)) {
+ print $OUT "Postponed breakpoints in files:\n";
+ my ($file, $line);
+ for $file (keys %postponed_file) {
+ my $db = $postponed_file{$file};
+ print $OUT " $file:\n";
+ for $line (sort {$a <=> $b} keys %$db) {
+ print $OUT " $line:\n";
+ my ($stop,$action) = split(/\0/, $$db{$line});
+ print $OUT " break if (", $stop, ")\n"
+ if $stop and $break_wanted;
+ print $OUT " action: ", $action, "\n"
+ if $action and $action_wanted;
+ last if $signal;
+ }
+ last if $signal;
+ }
+ }
+ if (%break_on_load and $break_wanted) {
+ print $OUT "Breakpoints on load:\n";
+ my $file;
+ for $file (keys %break_on_load) {
+ print $OUT " $file\n";
+ last if $signal;
+ }
+ }
+ if ($watch_wanted) {
+ if ($trace & 2) {
+ print $OUT "Watch-expressions:\n" if @to_watch;
+ for my $expr (@to_watch) {
+ print $OUT " $expr\n";
+ last if $signal;
+ }
+ }
+ }
+}
+
+sub cmd_M {
+ &list_modules();
+}
+
+sub cmd_o {
+ my $opt = shift || ''; # opt[=val]
+ if ($opt =~ /^(\S.*)/) {
+ &parse_options($1);
+ } else {
+ for (@options) {
+ &dump_option($_);
+ }
+ }
+}
+
+sub cmd_v {
+ my $line = shift;
+
+ if ($line =~ /^(\d*)$/) {
+ $incr = $window - 1;
+ $start = $1 if $1;
+ $start -= $preview;
+ $line = $start . '-' . ($start + $incr);
+ &cmd_l($line);
+ }
+}
+
+sub cmd_w {
+ my $expr = shift || '';
+ if ($expr =~ /^(\S.*)/) {
+ push @to_watch, $expr;
+ $evalarg = $expr;
+ my ($val) = &eval;
+ $val = (defined $val) ? "'$val'" : 'undef' ;
+ push @old_watch, $val;
+ $trace |= 2;
+ } else {
+ print $OUT "Adding a watch-expression requires an expression\n"; # hint
+ }
+}
+
+sub cmd_W {
+ my $expr = shift || '';
+ if ($expr eq '*') {
+ $trace &= ~2;
+ print $OUT "Deleting all watch expressions ...\n";
+ @to_watch = @old_watch = ();
+ } elsif ($expr =~ /^(\S.*)/) {
+ my $i_cnt = 0;
+ foreach (@to_watch) {
+ my $val = $to_watch[$i_cnt];
+ if ($val eq $expr) { # =~ m/^\Q$i$/) {
+ splice(@to_watch, $i_cnt, 1);
+ }
+ $i_cnt++;
+ }
+ } else {
+ print $OUT "Deleting a watch-expression requires an expression, or '*' for all\n"; # hint
+ }
}
### END of the API section
sub print_lineinfo {
resetterm(1) if $LINEINFO eq $OUT and $term_pid != $$;
+ local $\ = '';
+ local $, = '';
print $LINEINFO @_;
}
# The following takes its argument via $evalarg to preserve current @_
-sub eval {
- # 'my' would make it visible from user code
- # but so does local! --tchrist [... into @DB::res, not @res. IZ]
- local @res;
- {
- local $otrace = $trace;
- local $osingle = $single;
- local $od = $^D;
- { ($evalarg) = $evalarg =~ /(.*)/s; }
- @res = eval "$usercontext $evalarg;\n"; # '\n' for nice recursive debug
- $trace = $otrace;
- $single = $osingle;
- $^D = $od;
- }
- my $at = $@;
- local $saved[0]; # Preserve the old value of $@
- eval { &DB::save };
- if ($at) {
- print $OUT $at;
- } elsif ($onetimeDump) {
- dumpit($OUT, \@res) if $onetimeDump eq 'dump';
- methods($res[0]) if $onetimeDump eq 'methods';
- }
- @res;
-}
-
sub postponed_sub {
my $subname = shift;
if ($postponed{$subname} =~ s/^break\s([+-]?\d+)\s+if\s//) {
++$i until $dbline[$i] != 0 or $i >= $max;
$dbline{$i} = delete $postponed{$subname};
} else {
+ local $\ = '';
print $OUT "Subroutine $subname not found.\n";
}
return;
local *dbline = shift;
my $filename = $dbline;
$filename =~ s/^_<//;
+ local $\ = '';
$signal = 1, print $OUT "'$filename' loaded...\n"
if $break_on_load{$filename};
print_lineinfo(' ' x $stack_depth, "Package $filename.\n") if $frame;
do 'dumpvar.pl';
}
if (defined &main::dumpValue) {
- &main::dumpValue(shift);
+ local $\ = '';
+ local $, = '';
+ local $" = ' ';
+ my $v = shift;
+ my $maxdepth = shift || $option{dumpDepth};
+ $maxdepth = -1 unless defined $maxdepth; # -1 means infinite depth
+ &main::dumpValue($v, $maxdepth);
} else {
+ local $\ = '';
print $OUT "dumpvar.pl not available.\n";
}
$single = $osingle;
# Tied method do not create a context, so may get wrong message:
sub print_trace {
+ local $\ = '';
my $fh = shift;
resetterm(1) if $fh eq $LINEINFO and $LINEINFO eq $OUT and $term_pid != $$;
my @sub = dump_trace($_[0] + 1, $_[1]);
return $tty;
}
-# This one resets $IN, $OUT itself
+# This example function resets $IN, $OUT itself
sub os2_get_fork_TTY {
- $^F = 40; # XXXX Fixme!
+ local $^F = 40; # XXXX Fixme!
+ local $\ = '';
my ($in1, $out1, $in2, $out2);
# Having -d in PERL5OPT would lead to a disaster...
local $ENV{PERL5OPT} = $ENV{PERL5OPT} if $ENV{PERL5OPT};
$ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\b// if $ENV{PERL5OPT};
$ENV{PERL5OPT} =~ s/(?:^|(?<=\s))-d\B/-/ if $ENV{PERL5OPT};
- print $OUT "Making PERL5OPT->`$ENV{PERL5OPT}'.\n" if $ENV{PERL5OPT};
+ print $OUT "Making kid PERL5OPT->`$ENV{PERL5OPT}'.\n" if $ENV{PERL5OPT};
(my $name = $0) =~ s,^.*[/\\],,s;
- if ( pipe $in1, $out1 and pipe $in2, $out2 and
+ my @args;
+ if ( pipe $in1, $out1 and pipe $in2, $out2
# system P_SESSION will fail if there is another process
# in the same session with a "dependent" asynchronous child session.
- (($kpid = CORE::system 4, $^X, '-we', <<'ES', fileno $in1, fileno $out2, "Daughter Perl debugger $pids $name") >= 0 or warn "system P_SESSION: $!, $^E" and 0) # P_SESSION
-use Term::ReadKey;
+ and @args = ($rl, fileno $in1, fileno $out2,
+ "Daughter Perl debugger $pids $name") and
+ (($kpid = CORE::system 4, $^X, '-we', <<'ES', @args) >= 0 # P_SESSION
use OS2::Process;
-my $in = shift; # Read from here and pass through
+my ($rl, $in) = (shift, shift); # Read from $in and pass through
set_title pop;
system P_NOWAIT, $^X, '-we', <<EOS or die "Cannot start a grandkid";
open IN, '<&=$in' or die "open <&=$in: \$!";
my $out = shift;
open OUT, ">&=$out" or die "Cannot open &=$out for writing: $!";
select OUT; $| = 1;
-ReadMode 4; # Nodelay on kbd. Pipe is automatically nodelay...
-print while sysread STDIN, $_, 1<<16;
+require Term::ReadKey if $rl;
+Term::ReadKey::ReadMode(4) if $rl; # Nodelay on kbd. Pipe is automatically nodelay...
+print while sysread STDIN, $_, 1<<($rl ? 16 : 0);
ES
+ or warn "system P_SESSION: $!, $^E" and 0)
and close $in1 and close $out2 ) {
- $pidprompt = ''; # Shown anyway in titlebar
+ $pidprompt = ''; # Shown anyway in titlebar
reset_IN_OUT($in2, $out1);
$tty = '*reset*';
return ''; # Indicate that reset_IN_OUT is called
EOP
} elsif ($in ne '') {
TTY($in);
+ } else {
+ $console = ''; # Indicate no need to open-from-the-console
}
undef $fork_TTY;
}
if (@typeahead) {
my $left = @typeahead;
my $got = shift @typeahead;
+ local $\ = '';
print $OUT "auto(-$left)", shift, $got, "\n";
$term->AddHistory($got)
if length($got) > 1 and defined $term->Features->{addHistory};
sub parse_options {
local($_)= @_;
+ local $\ = '';
# too dangerous to let intuitive usage overwrite important things
# defaultion should never be the default
my %opt_needs_val = map { ( $_ => 1 ) } qw{
- arrayDepth hashDepth LineInfo maxTraceLen ornaments windowSize
+ dumpDepth arrayDepth hashDepth LineInfo maxTraceLen ornaments windowSize
pager quote ReadLine recallCommand RemotePort ShellBang TTY
};
while (length) {
$val_defaulted = 1;
$val = "1"; # this is an evil default; make 'em set it!
} elsif ($sep eq "=") {
-
if (s/ (["']) ( (?: \\. | (?! \1 ) [^\\] )* ) \1 //x) {
my $quote = $1;
($val = $2) =~ s/\\([$quote\\])/$1/g;
print($OUT "Ambiguous option `$opt'\n"), next if $matches > 1;
if ($opt_needs_val{$option} && $val_defaulted) {
- print $OUT "Option `$opt' is non-boolean. Use `O $option=VAL' to set, `O $option?' to query\n";
+ my $cmd = ($CommandSet eq '580') ? 'o' : 'O';
+ print $OUT "Option `$opt' is non-boolean. Use `$cmd $option=VAL' to set, `$cmd $option?' to query\n";
next;
}
sub warn {
my($msg)= join("",@_);
$msg .= ": $!\n" unless $msg =~ /\n$/;
+ local $\ = '';
print $OUT $msg;
}
}
&warn("Too late to set TTY, enabled on next `R'!\n") if $term and @_;
# Useful if done through PERLDB_OPTS:
- $tty = shift if @_;
+ $console = $tty = shift if @_;
$tty or $console;
}
if (${$term->Features}{tkRunning}) {
return $term->tkRunning(@_);
} else {
+ local $\ = '';
print $OUT "tkRunning not supported by current ReadLine package.\n";
0;
}
$lineinfo;
}
-sub list_versions {
+sub list_modules { # versions
my %version;
my $file;
for (keys %INC) {
# eeevil ornaments enabled. This is an insane mess.
$help = "
+Help is currently only available for the new 580 CommandSet,
+if you really want old behaviour, presumably you know what
+you're doing ?-)
+
+B<T> Stack trace.
+B<s> [I<expr>] Single step [in I<expr>].
+B<n> [I<expr>] Next, steps over subroutine calls [in I<expr>].
+<B<CR>> Repeat last B<n> or B<s> command.
+B<r> Return from current subroutine.
+B<c> [I<line>|I<sub>] Continue; optionally inserts a one-time-only breakpoint
+ at the specified position.
+B<l> I<min>B<+>I<incr> List I<incr>+1 lines starting at I<min>.
+B<l> I<min>B<->I<max> List lines I<min> through I<max>.
+B<l> I<line> List single I<line>.
+B<l> I<subname> List first window of lines from subroutine.
+B<l> I<\$var> List first window of lines from subroutine referenced by I<\$var>.
+B<l> List next window of lines.
+B<-> List previous window of lines.
+B<v> [I<line>] View window around I<line>.
+B<.> Return to the executed line.
+B<f> I<filename> Switch to viewing I<filename>. File must be already loaded.
+ I<filename> may be either the full name of the file, or a regular
+ expression matching the full file name:
+ B<f> I</home/me/foo.pl> and B<f> I<oo\\.> may access the same file.
+ Evals (with saved bodies) are considered to be filenames:
+ B<f> I<(eval 7)> and B<f> I<eval 7\\b> access the body of the 7th eval
+ (in the order of execution).
+B</>I<pattern>B</> Search forwards for I<pattern>; final B</> is optional.
+B<?>I<pattern>B<?> Search backwards for I<pattern>; final B<?> is optional.
+B<L> [I<a|b|w>] List actions and or breakpoints and or watch-expressions.
+B<S> [[B<!>]I<pattern>] List subroutine names [not] matching I<pattern>.
+B<t> Toggle trace mode.
+B<t> I<expr> Trace through execution of I<expr>.
+B<b> Sets breakpoint on current line)
+B<b> [I<line>] [I<condition>]
+ Set breakpoint; I<line> defaults to the current execution line;
+ I<condition> breaks if it evaluates to true, defaults to '1'.
+B<b> I<subname> [I<condition>]
+ Set breakpoint at first line of subroutine.
+B<b> I<\$var> Set breakpoint at first line of subroutine referenced by I<\$var>.
+B<b> B<load> I<filename> Set breakpoint on 'require'ing the given file.
+B<b> B<postpone> I<subname> [I<condition>]
+ Set breakpoint at first line of subroutine after
+ it is compiled.
+B<b> B<compile> I<subname>
+ Stop after the subroutine is compiled.
+B<B> [I<line>] Delete the breakpoint for I<line>.
+B<B> I<*> Delete all breakpoints.
+B<a> [I<line>] I<command>
+ Set an action to be done before the I<line> is executed;
+ I<line> defaults to the current execution line.
+ Sequence is: check for breakpoint/watchpoint, print line
+ if necessary, do action, prompt user if necessary,
+ execute line.
+B<a> Does nothing
+B<A> [I<line>] Delete the action for I<line>.
+B<A> I<*> Delete all actions.
+B<w> I<expr> Add a global watch-expression.
+B<w> Does nothing
+B<W> I<expr> Delete a global watch-expression.
+B<W> I<*> Delete all watch-expressions.
+B<V> [I<pkg> [I<vars>]] List some (default all) variables in package (default current).
+ Use B<~>I<pattern> and B<!>I<pattern> for positive and negative regexps.
+B<X> [I<vars>] Same as \"B<V> I<currentpackage> [I<vars>]\".
+B<x> I<expr> Evals expression in list context, dumps the result.
+B<m> I<expr> Evals expression in list context, prints methods callable
+ on the first element of the result.
+B<m> I<class> Prints methods callable via the given class.
+B<M> Show versions of loaded modules.
+
+B<<> ? List Perl commands to run before each prompt.
+B<<> I<expr> Define Perl command to run before each prompt.
+B<<<> I<expr> Add to the list of Perl commands to run before each prompt.
+B<>> ? List Perl commands to run after each prompt.
+B<>> I<expr> Define Perl command to run after each prompt.
+B<>>B<>> I<expr> Add to the list of Perl commands to run after each prompt.
+B<{> I<db_command> Define debugger command to run before each prompt.
+B<{> ? List debugger commands to run before each prompt.
+B<{{> I<db_command> Add to the list of debugger commands to run before each prompt.
+B<$prc> I<number> Redo a previous command (default previous command).
+B<$prc> I<-number> Redo number'th-to-last command.
+B<$prc> I<pattern> Redo last command that started with I<pattern>.
+ See 'B<O> I<recallCommand>' too.
+B<$psh$psh> I<cmd> Run cmd in a subprocess (reads from DB::IN, writes to DB::OUT)"
+ . ( $rc eq $sh ? "" : "
+B<$psh> [I<cmd>] Run I<cmd> in subshell (forces \"\$SHELL -c 'cmd'\")." ) . "
+ See 'B<O> I<shellBang>' too.
+B<@>I<file> Execute I<file> containing debugger commands (may nest).
+B<H> I<-number> Display last number commands (default all).
+B<p> I<expr> Same as \"I<print {DB::OUT} expr>\" in current package.
+B<|>I<dbcmd> Run debugger command, piping DB::OUT to current pager.
+B<||>I<dbcmd> Same as B<|>I<dbcmd> but DB::OUT is temporarilly select()ed as well.
+B<\=> [I<alias> I<value>] Define a command alias, or list current aliases.
+I<command> Execute as a perl statement in current package.
+B<R> Pure-man-restart of debugger, some of debugger state
+ and command-line options may be lost.
+ Currently the following settings are preserved:
+ history, breakpoints and actions, debugger B<O>ptions
+ and the following command-line options: I<-w>, I<-I>, I<-e>.
+
+B<o> [I<opt>] ... Set boolean option to true
+B<o> [I<opt>B<?>] Query options
+B<o> [I<opt>B<=>I<val>] [I<opt>=B<\">I<val>B<\">] ...
+ Set options. Use quotes in spaces in value.
+ I<recallCommand>, I<ShellBang> chars used to recall command or spawn shell;
+ I<pager> program for output of \"|cmd\";
+ I<tkRunning> run Tk while prompting (with ReadLine);
+ I<signalLevel> I<warnLevel> I<dieLevel> level of verbosity;
+ I<inhibit_exit> Allows stepping off the end of the script.
+ I<ImmediateStop> Debugger should stop as early as possible.
+ I<RemotePort> Remote hostname:port for remote debugging
+ The following options affect what happens with B<V>, B<X>, and B<x> commands:
+ I<arrayDepth>, I<hashDepth> print only first N elements ('' for all);
+ I<compactDump>, I<veryCompact> change style of array and hash dump;
+ I<globPrint> whether to print contents of globs;
+ I<DumpDBFiles> dump arrays holding debugged files;
+ I<DumpPackages> dump symbol tables of packages;
+ I<DumpReused> dump contents of \"reused\" addresses;
+ I<quote>, I<HighBit>, I<undefPrint> change style of string dump;
+ I<bareStringify> Do not print the overload-stringified value;
+ Other options include:
+ I<PrintRet> affects printing of return value after B<r> command,
+ I<frame> affects printing messages on subroutine entry/exit.
+ I<AutoTrace> affects printing messages on possible breaking points.
+ I<maxTraceLen> gives max length of evals/args listed in stack trace.
+ I<ornaments> affects screen appearance of the command line.
+ I<CreateTTY> bits control attempts to create a new TTY on events:
+ 1: on fork() 2: debugger is started inside debugger
+ 4: on startup
+ During startup options are initialized from \$ENV{PERLDB_OPTS}.
+ You can put additional initialization options I<TTY>, I<noTTY>,
+ I<ReadLine>, I<NonStop>, and I<RemotePort> there (or use
+ `B<R>' after you set them).
+
+B<q> or B<^D> Quit. Set B<\$DB::finished = 0> to debug global destruction.
+B<h> Summary of debugger commands.
+B<h> [I<db_command>] Get help [on a specific debugger command], enter B<|h> to page.
+B<h h> Long help for debugger commands
+B<$doccmd> I<manpage> Runs the external doc viewer B<$doccmd> command on the
+ named Perl I<manpage>, or on B<$doccmd> itself if omitted.
+ Set B<\$DB::doccmd> to change viewer.
+
+Type `|h h' for a paged display if this was too hard to read.
+
+"; # Fix balance of vi % matching: }}}}
+
+ # note: tabs in the following section are not-so-helpful
+ $summary = <<"END_SUM";
+I<List/search source lines:> I<Control script execution:>
+ B<l> [I<ln>|I<sub>] List source code B<T> Stack trace
+ B<-> or B<.> List previous/current line B<s> [I<expr>] Single step [in expr]
+ B<v> [I<line>] View around line B<n> [I<expr>] Next, steps over subs
+ B<f> I<filename> View source in file <B<CR>/B<Enter>> Repeat last B<n> or B<s>
+ B</>I<pattern>B</> B<?>I<patt>B<?> Search forw/backw B<r> Return from subroutine
+ B<M> Show module versions B<c> [I<ln>|I<sub>] Continue until position
+I<Debugger controls:> B<L> List break/watch/actions
+ B<o> [...] Set debugger options B<t> [I<expr>] Toggle trace [trace expr]
+ B<<>[B<<>]|B<{>[B<{>]|B<>>[B<>>] [I<cmd>] Do pre/post-prompt B<b> [I<ln>|I<event>|I<sub>] [I<cnd>] Set breakpoint
+ B<$prc> [I<N>|I<pat>] Redo a previous command B<B> I<ln|*> Delete a/all breakpoints
+ B<H> [I<-num>] Display last num commands B<a> [I<ln>] I<cmd> Do cmd before line
+ B<=> [I<a> I<val>] Define/list an alias B<A> I<ln|*> Delete a/all actions
+ B<h> [I<db_cmd>] Get help on command B<w> I<expr> Add a watch expression
+ B<h h> Complete help page B<W> I<expr|*> Delete a/all watch expressions
+ B<|>[B<|>]I<db_cmd> Send output to pager B<$psh>\[B<$psh>\] I<syscmd> Run cmd in a subprocess
+ B<q> or B<^D> Quit B<R> Attempt a restart
+I<Data Examination:> B<expr> Execute perl code, also see: B<s>,B<n>,B<t> I<expr>
+ B<x>|B<m> I<expr> Evals expr in list context, dumps the result or lists methods.
+ B<p> I<expr> Print expression (uses script's current package).
+ B<S> [[B<!>]I<pat>] List subroutine names [not] matching pattern
+ B<V> [I<Pk> [I<Vars>]] List Variables in Package. Vars can be ~pattern or !pattern.
+ B<X> [I<Vars>] Same as \"B<V> I<current_package> [I<Vars>]\".
+For more help, type B<h> I<cmd_letter>, or run B<$doccmd perldebug> for all docs.
+END_SUM
+ # ')}}; # Fix balance of vi % matching
+
+ # and this is really numb...
+ $pre580_help = "
B<T> Stack trace.
B<s> [I<expr>] Single step [in I<expr>].
B<n> [I<expr>] Next, steps over subroutine calls [in I<expr>].
"; # Fix balance of vi % matching: }}}}
# note: tabs in the following section are not-so-helpful
- $summary = <<"END_SUM";
+ $pre580_summary = <<"END_SUM";
I<List/search source lines:> I<Control script execution:>
B<l> [I<ln>|I<sub>] List source code B<T> Stack trace
B<-> or B<.> List previous/current line B<s> [I<expr>] Single step [in expr]
For more help, type B<h> I<cmd_letter>, or run B<$doccmd perldebug> for all docs.
END_SUM
# ')}}; # Fix balance of vi % matching
+
}
sub print_help {
. $Term::ReadLine::TermCap::rl_term_set[1]
}gex;
+ local $\ = '';
print $OUT $_;
}
&warn(Carp::longmess("Signal @_"));
}
else {
+ local $\ = '';
print $DB::OUT "Got signal @_\n";
}
kill 'ABRT', $$;
}
sub dieLevel {
+ local $\ = '';
if (@_) {
$prevdie = $SIG{__DIE__} unless $dieLevel;
$dieLevel = shift;
for $name (grep {defined &{${"${class}::"}{$_}}}
sort keys %{"${class}::"}) {
next if $seen{ $name }++;
+ local $\ = '';
+ local $, = '';
print $DB::OUT "$prepend$name\n";
}
return unless shift; # Recurse?
}
sub end_report {
+ local $\ = '';
print $OUT "Use `q' to quit or `R' to restart. `h q' for details.\n"
}
DB::fake::at_exit() unless $fall_off_end or $runnonstop;
}
+
+# ===================================== pre580 ================================
+# this is very sad below here...
+#
+
+sub cmd_pre580_null {
+ # do nothing...
+}
+
+sub cmd_pre580_a {
+ my $cmd = shift;
+ if ($cmd =~ /^(\d*)\s*(.*)/) {
+ $i = $1 || $line; $j = $2;
+ if (length $j) {
+ if ($dbline[$i] == 0) {
+ print $OUT "Line $i may not have an action.\n";
+ } else {
+ $had_breakpoints{$filename} |= 2;
+ $dbline{$i} =~ s/\0[^\0]*//;
+ $dbline{$i} .= "\0" . action($j);
+ }
+ } else {
+ $dbline{$i} =~ s/\0[^\0]*//;
+ delete $dbline{$i} if $dbline{$i} eq '';
+ }
+ }
+}
+
+sub cmd_pre580_b {
+ my $cmd = shift;
+ my $dbline = shift;
+ if ($cmd =~ /^load\b\s*(.*)/) {
+ my $file = $1; $file =~ s/\s+$//;
+ &cmd_b_load($file);
+ } elsif ($cmd =~ /^(postpone|compile)\b\s*([':A-Za-z_][':\w]*)\s*(.*)/) {
+ my $cond = length $3 ? $3 : '1';
+ my ($subname, $break) = ($2, $1 eq 'postpone');
+ $subname =~ s/\'/::/g;
+ $subname = "${'package'}::" . $subname
+ unless $subname =~ /::/;
+ $subname = "main".$subname if substr($subname,0,2) eq "::";
+ $postponed{$subname} = $break ? "break +0 if $cond" : "compile";
+ } elsif ($cmd =~ /^([':A-Za-z_][':\w]*(?:\[.*\])?)\s*(.*)/) {
+ my $subname = $1;
+ my $cond = length $2 ? $2 : '1';
+ &cmd_b_sub($subname, $cond);
+ } elsif ($cmd =~ /^(\d*)\s*(.*)/) {
+ my $i = $1 || $dbline;
+ my $cond = length $2 ? $2 : '1';
+ &cmd_b_line($i, $cond);
+ }
+}
+
+sub cmd_pre580_D {
+ my $cmd = shift;
+ if ($cmd =~ /^\s*$/) {
+ print $OUT "Deleting all breakpoints...\n";
+ my $file;
+ for $file (keys %had_breakpoints) {
+ local *dbline = $main::{'_<' . $file};
+ my $max = $#dbline;
+ my $was;
+
+ for ($i = 1; $i <= $max ; $i++) {
+ if (defined $dbline{$i}) {
+ $dbline{$i} =~ s/^[^\0]+//;
+ if ($dbline{$i} =~ s/^\0?$//) {
+ delete $dbline{$i};
+ }
+ }
+ }
+
+ if (not $had_breakpoints{$file} &= ~1) {
+ delete $had_breakpoints{$file};
+ }
+ }
+ undef %postponed;
+ undef %postponed_file;
+ undef %break_on_load;
+ }
+}
+
+sub cmd_pre580_h {
+ my $cmd = shift;
+ if ($cmd =~ /^\s*$/) {
+ print_help($pre580_help);
+ } elsif ($cmd =~ /^h\s*/) {
+ print_help($pre580_summary);
+ } elsif ($cmd =~ /^h\s+(\S.*)$/) {
+ my $asked = $1; # for proper errmsg
+ my $qasked = quotemeta($asked); # for searching
+ # XXX: finds CR but not <CR>
+ if ($pre580_help =~ /^<?(?:[IB]<)$qasked/m) {
+ while ($pre580_help =~ /^(<?(?:[IB]<)$qasked([\s\S]*?)\n)(?!\s)/mg) {
+ print_help($1);
+ }
+ } else {
+ print_help("B<$asked> is not a debugger command.\n");
+ }
+ }
+}
+
+sub cmd_pre580_W {
+ my $cmd = shift;
+ if ($cmd =~ /^$/) {
+ $trace &= ~2;
+ @to_watch = @old_watch = ();
+ } elsif ($cmd =~ /^(.*)/s) {
+ push @to_watch, $1;
+ $evalarg = $1;
+ my ($val) = &eval;
+ $val = (defined $val) ? "'$val'" : 'undef' ;
+ push @old_watch, $val;
+ $trace |= 2;
+ }
+}
+
package DB::fake;
sub at_exit {
package DB; # Do not trace this 1; below!
1;
+
https://perl5.git.perl.org / perl5.git / blobdiff