=head2 Compiling Perl 5 on AIX
+For information on compilers on older versions of AIX, see L<Compiling
+Perl 5 on older AIX versions up to 4.3.3>.
+
+When compiling Perl, you must use an ANSI C compiler. AIX does not ship
+an ANSI compliant C-compiler with AIX by default, but binary builds of
+gcc for AIX are widely available.
+
+=head2 Supported Compilers
+
+Currently all versions of IBM's "xlc", "xlc_r", "cc", "cc_r" or
+"vac" ANSI/C compiler will work for building Perl if that compiler
+works on your system.
+
+If you plan to link Perl to any module that requires thread-support,
+like DBD::Oracle, it is better to use the _r version of the compiler.
+This will not build a threaded Perl, but a thread-enabled Perl. See
+also L<Threaded Perl> later on.
+
+As of writing (2008-11) only the IBM XL C for AIX or XL C/C++ for AIX
+compiler is supported by IBM on AIX 5L/6.1.
+
+The following compiler versions are supported by IBM:
+
+XL C and XL C/C++ V7, V8, V9, V10
+
+The XL C for AIX is integrated in the XL C/C++ for AIX compiler.
+
+If you choose XL C/C++ V9 you need APAR IZ35785 installed
+otherwise the integrated SDBM_File do not compile correctly due
+to an optimization bug. You can circumvent this problem by
+adding -qipa to the optimization flags (-Doptimize='-O -qipa').
+The PTF for APAR IZ35785 which solves this problem will be available
+in 1Q 2009. IBM does provide an emergency fix for this problem.
+
+Perl can be compiled with either IBM's ANSI C compiler or with gcc.
+The former is recommended, as not only it can compile Perl with no
+difficulty, but also can take advantage of features listed later
+that require the use of IBM compiler-specific command-line flags.
+
+If you decide to use gcc, make sure your installation is recent and
+complete, and be sure to read the Perl INSTALL file for more gcc-specific
+details. Please report any hoops you had to jump through to the
+development team.
+
+=head2 Perl 5.8.9 was successfully compiled and tested on:
+
+ AIX Level | Compiler Level | w th | w/o th
+ --------------------------+-------------------------+------+-------
+ 5.1 TL9 32 bit | XL C/C++ V7 | OK | OK
+ 5.1 TL9 32 bit | gcc 3.2.2 | OK | OK
+ 5.1 TL9 64 bit | XL C/C++ V7 | OK | OK
+ 5.2 TL10 32 bit | XL C/C++ V8 | OK | OK
+ 5.2 TL10 64 bit | XL C/C++ V8 | OK | OK
+ 5.3 TL7 32 bit | XL C/C++ V9 + IZ35785 | OK | OK
+ 5.3 TL7 32 bit | gcc 4.2.4 | OK | OK
+ 5.3 TL7 64 bit | XL C/C++ V9 + IZ35785 | OK | OK
+ 6.1 TL1 32 bit | XL C/C++ V10 | OK | OK
+ 6.1 TL1 64 bit + IZ39077 | XL C/C++ V10 | OK | OK
+
+ w th = with thread
+ w/o th = without thread
+
+Successfully tested means that all make test runs with an result of 100% OK.
+All tests were conducted with -Duseshrplib set.
+
+=head2 Building Dynamic Extensions on AIX
+
+Starting from Perl 5.7.2 (and consequently 5.8.x / 5.10.x) and AIX 4.3
+or newer Perl uses the AIX native dynamic loading interface in the so
+called runtime linking mode instead of the emulated interface that was
+used in Perl releases 5.6.1 and earlier or, for AIX releases 4.2 and
+earlier. This change does break backward compatibility with compiled
+modules from earlier Perl releases. The change was made to make Perl
+more compliant with other applications like Apache/mod_perl which are
+using the AIX native interface. This change also enables the use of
+C++ code with static constructors and destructors in Perl extensions,
+which was not possible using the emulated interface.
+
+It is highly recommended to use the new interface.
+
+=head2 Using Large Files with Perl
+
+Should yield no problems.
+
+=head2 Threaded Perl
+
+Should yield no problems with AIX 5.1 / 5.2 / 5.3 and 6.1.
+
+IBM uses the AIX system Perl (V5.6.0 on AIX 5.1 and V5.8.2 on
+AIX 5.2 / 5.3 and 6.1) for some AIX
+system scripts. If you switch the links in /usr/bin from the
+AIX system Perl (/usr/opt/perl5) to the newly build Perl then you
+get the same features as with the IBM AIX system Perl if the
+threaded options are used.
+
+The threaded Perl build works also on AIX 5.1 but the IBM Perl
+build (Perl v5.6.0) is not threaded on AIX 5.1.
+
+=head2 64-bit Perl
+
+If your AIX system is installed with 64-bit support, you can expect 64-bit
+configurations to work. If you want to use 64-bit Perl on AIX 6.1
+you need a APAR for a libc.a bug which affects (n)dbm_XXX functions.
+The APAR number for this problem is IZ39077.
+
+If you need more memory (larger data segment) for your Perl programs you
+can set:
+
+ /etc/security/limits
+ default: (or your user)
+ data = -1 (default is 262144 * 512 byte)
+
+With the default setting the size is limited to 128MB.
+The -1 removes this limit.
+
+=head2 Recommended Options AIX 5.1/5.2/5.3 and 6.1 (threaded/32-bit)
+
+With the following options you get a threaded Perl version which
+passes all make tests in threaded 32-bit mode, which is the default
+configuration for the Perl builds that AIX ships with.
+
+ rm config.sh
+ ./Configure \
+ -d \
+ -Dcc=cc_r \
+ -Duseshrplib \
+ -Dusethreads \
+ -Dprefix=/usr/opt/perl5_32
+
+The -Dprefix option will install Perl in a directory parallel to the
+IBM AIX system Perl installation.
+
+=head2 Recommended Options AIX 5.1/5.2/5.3 and 6.1 (32-bit)
+
+With the following options you get a Perl version which passes
+all make tests in 32-bit mode.
+
+ rm config.sh
+ ./Configure \
+ -d \
+ -Dcc=cc_r \
+ -Duseshrplib \
+ -Dprefix=/usr/opt/perl5_32
+
+The -Dprefix option will install Perl in a directory parallel to the
+IBM AIX system Perl installation.
+
+=head2 Recommended Options AIX 5.1/5.2/5.3 and 6.1 (threaded/64-bit)
+
+With the following options you get a threaded Perl version which
+passes all make tests in 64-bit mode.
+
+ export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell)
+
+ rm config.sh
+ ./Configure \
+ -d \
+ -Dcc=cc_r \
+ -Duseshrplib \
+ -Dusethreads \
+ -Duse64bitall \
+ -Dprefix=/usr/opt/perl5_64
+
+=head2 Recommended Options AIX 5.1/5.2/5.3 and 6.1(64-bit)
+
+With the following options you get a Perl version which passes all
+make tests in 64-bit mode.
+
+ export OBJECT_MODE=64 / setenv OBJECT_MODE 64 (depending on your shell)
+
+ rm config.sh
+ ./Configure \
+ -d \
+ -Dcc=cc_r \
+ -Duseshrplib \
+ -Duse64bitall \
+ -Dprefix=/usr/opt/perl5_64
+
+The -Dprefix option will install Perl in a directory parallel to the
+IBM AIX system Perl installation.
+
+If you choose gcc to compile 64-bit Perl then you need to use the
+following options:
+
+ -Dcc='gcc -maix64'
+
+
+=head2 Compiling Perl 5 on older AIX versions up to 4.3.3
+
+Due to the fact that AIX 4.3.3 reached end-of-service in December 31,
+2003 this information is provided as is. The Perl versions prior to
+Perl 5.8.9 could be compiled on AIX up to 4.3.3 with the following
+settings (your mileage may vary):
+
When compiling Perl, you must use an ANSI C compiler. AIX does not ship
an ANSI compliant C-compiler with AIX by default, but binary builds of
gcc for AIX are widely available.
xlC.aix50.rte 5.0.2.0 or 6.0.0.3
-subversions are not the same `latest' on all OS versions. For example,
+subversions are not the same "latest" on all OS versions. For example,
the latest xlC-5 on aix41 is 5.0.2.9, while on aix43, it is 5.0.2.7.
Perl can be compiled with either IBM's ANSI C compiler or with gcc.
Upgrading to at least 5.0.2.0 is recommended.
If you decide to use gcc, make sure your installation is recent and
-complete, and be sure to read the Perl README file for more gcc-specific
+complete, and be sure to read the Perl INSTALL file for more gcc-specific
details. Please report any hoops you had to jump through to the development
team.
bos.rte 4.3.2.0 COMMITTED Base Operating System Runtime
#
-The same might happen to AIX 5.1 or other OS levels. As a side note, perl
+The same might happen to AIX 5.1 or other OS levels. As a side note, Perl
cannot be built without bos.adt.syscalls and bos.adt.libm installed
# lslpp -l | egrep "syscalls|libm"
AIX supports dynamically loadable objects as well as shared libraries.
Shared libraries by convention end with the suffix .a, which is a bit
misleading, as an archive can contain static as well as dynamic members.
-For perl dynamically loaded objects we use the .so suffix also used on
+For Perl dynamically loaded objects we use the .so suffix also used on
many other platforms.
Note that starting from Perl 5.7.2 (and consequently 5.8.0) and AIX 4.3
called runtime linking mode instead of the emulated interface that was
used in Perl releases 5.6.1 and earlier or, for AIX releases 4.2 and
earlier. This change does break backward compatibility with compiled
-modules from earlier perl releases. The change was made to make Perl
+modules from earlier Perl releases. The change was made to make Perl
more compliant with other applications like Apache/mod_perl which are
using the AIX native interface. This change also enables the use of C++
-code with static constructors and destructors in perl extensions, which
+code with static constructors and destructors in Perl extensions, which
was not possible using the emulated interface.
=head2 The IBM ANSI C Compiler
level. Of course this is subject to changes. You can only upgrade
versions from ftp-available updates if the first three digit groups
are the same (in where you can skip intermediate unlike the patches
-in the developer snapshots of perl), or to one version up where the
-`base' is available. In other words, the AIX compiler patches are
+in the developer snapshots of Perl), or to one version up where the
+"base" is available. In other words, the AIX compiler patches are
cumulative.
vac.C.4.4.0.1 => vac.C.4.4.0.3 is OK (vac.C.4.4.0.2 not needed)
http://www14.software.ibm.com/webapp/download/downloadaz.jsp and click
"C for AIX", and follow the instructions.
-=head2 Using GNU's gcc for building perl
+=head2 The usenm option
+
+If linking miniperl
+
+ cc -o miniperl ... miniperlmain.o opmini.o perl.o ... -lm -lc ...
+
+causes error like this
+
+ ld: 0711-317 ERROR: Undefined symbol: .aintl
+ ld: 0711-317 ERROR: Undefined symbol: .copysignl
+ ld: 0711-317 ERROR: Undefined symbol: .syscall
+ ld: 0711-317 ERROR: Undefined symbol: .eaccess
+ ld: 0711-317 ERROR: Undefined symbol: .setresuid
+ ld: 0711-317 ERROR: Undefined symbol: .setresgid
+ ld: 0711-317 ERROR: Undefined symbol: .setproctitle
+ ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
+
+you could retry with
+
+ make realclean
+ rm config.sh
+ ./Configure -Dusenm ...
+
+which makes Configure to use the C<nm> tool when scanning for library
+symbols, which usually is not done in AIX.
+
+Related to this, you probably should not use the C<-r> option of
+Configure in AIX, because that affects of how the C<nm> tool is used.
+
+=head2 Using GNU's gcc for building Perl
Using gcc-3.x (tested with 3.0.4, 3.1, and 3.2) now works out of the box,
as do recent gcc-2.9 builds available directly from IBM as part of their
=head2 Threaded Perl
Threads seem to work OK, though at the moment not all tests pass when
-threads are used in combination with 64bit configurations.
+threads are used in combination with 64-bit configurations.
You may get a warning when doing a threaded build:
=head2 64-bit Perl
-If your AIX is installed with 64-bit support, you can expect 64bit
+If your AIX is installed with 64-bit support, you can expect 64-bit
configurations to work. In combination with threads some tests might
still fail.
(such as time() and gettimeofday()) return broken values, and
therefore in AIX 4.2 Perl is not linked against the libC_r.
-=head1 AUTHOR
+=head1 AUTHORS
-H.Merijn Brand <h.m.brand@hccnet.nl>
+H.Merijn Brand <h.m.brand@xs4all.nl>
+Rainer Tammer <tammer@tammer.net>
=head1 DATE
-Version 0.0.6: 23 Dec 2002
+Version 0.0.8: 01 Dec 2008
=cut
https://perl5.git.perl.org / perl5.git / blobdiff