# Note: this Configure script was generated automatically. Rather than
# working with this copy of Configure, you may wish to get metaconfig.
# The dist package (which contains metaconfig) is available via SVN:
-# svn co https://svn.sourceforge.net/svnroot/dist/trunk/dist
+# svn co https://svn.code.sf.net/p/dist/code/trunk/dist
#
# Though this script was generated by metaconfig from metaunits, it is
# OK to send patches against Configure itself. It's up to the Configure
# See Porting/pumpkin.pod for more information on metaconfig.
#
-# Generated on Fri Feb 15 14:51:06 CET 2013 [metaconfig 3.5 PL0]
+# Generated on Mon May 27 09:27:16 CEST 2013 [metaconfig 3.5 PL0]
# (with additional metaconfig patches by perlbug@perl.org)
cat >c1$$ <<EOF
is_os2=yes
elif test -n "$DJGPP"; then
case "X${MACHTYPE:-nonesuchmach}" in
- *cygwin) ;;
+ *cygwin|*msys) ;;
*) p_=\; ;;
esac
fi
lddlflags=''
usedl=''
doublesize=''
+bootstrap_charset=''
ebcdic=''
fflushNULL=''
fflushall=''
case "$sh" in
'') cat >&2 <<EOM
-$me: Fatal Error: I can't find a Bourne Shell anywhere.
+$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Perl Maintainers) at perlbug@perl.org and
+Please contact me (Perl Maintainers) at perlbug@perl.org and
we'll try to straighten this all out.
EOM
exit 1
;;
*) issymlink='' ;;
esac
- fi
+ fi
fi
if $test "X$issymlink" = X; then
if $test -L sym 2>/dev/null; then
myuname=`$uname -a 2>/dev/null`
$test -z "$myuname" && myuname=`hostname 2>/dev/null`
# Downcase everything to avoid ambiguity.
-# Remove slashes and single quotes so we can use parts of this in
+# Remove slashes and single quotes so we can use parts of this in
# directory and file names.
# Remove newlines so myuname is sane to use elsewhere.
# tr '[A-Z]' '[a-z]' would not work in EBCDIC
fi
: determine installation prefix for where package is to be installed.
-if $afs; then
+if $afs; then
$cat <<EOM
Since you are running AFS, I need to distinguish the directory in which
esac
# See note above about -fstack-protector
case "$ccflags" in
-*-fstack-protector*)
+*-fstack-protector*)
case "$dflt" in
*-fstack-protector*) ;; # Don't add it again
- *) dflt="$dflt -fstack-protector" ;;
+ *) dflt="$dflt -fstack-protector" ;;
esac
;;
esac
. ./myread
archname="$ans"
-: optionally add api version to the architecture for versioned archlibs
+: optionally add API version to the architecture for versioned archlibs
case "$useversionedarchname" in
$define|true|[yY]*) dflt='y';;
*) dflt='n';;
[yY]*) fn=d~+
rp='Installation prefix to use for vendor-supplied add-ons?'
case "$vendorprefix" in
- '') dflt='' ;;
+ '') dflt="$prefix" ;;
*) dflt=$vendorprefix ;;
esac
. ./getfile
Lastly, you can have perl look in other directories for extensions and
modules in addition to those already specified.
-These directories will be searched after
- $sitearch
- $sitelib
+These directories will be searched after
+ $sitearch
+ $sitelib
EOM
test X"$vendorlib" != "X" && echo ' ' $vendorlib
test X"$vendorarch" != "X" && echo ' ' $vendorarch
rp='Colon-separated list of additional directories for perl to search?'
. ./myread
case "$ans" in
-' '|''|none) otherlibdirs=' ' ;;
+' '|''|none) otherlibdirs=' ' ;;
*) otherlibdirs="$ans" ;;
esac
case "$otherlibdirs" in
;;
esac
case "$dflt" in
- '')
+ '')
if $test "$osname" = aix -a "X$PASE" != "Xdefine" -a ! -f /lib/syscalls.exp; then
echo " "
echo "Whoops! This is an AIX system without /lib/syscalls.exp!" >&4
- echo "'nm' won't be sufficient on this sytem." >&4
+ echo "'nm' won't be sufficient on this system." >&4
dflt=n
fi
;;
;;
linux|irix*|gnu*) dflt="-shared $optimize" ;;
next) dflt='none' ;;
- solaris) dflt='-G' ;;
+ solaris) # See [perl #66604].
+ # On Solaris 11, gcc -m64 on amd64
+ # appears not to understand -G. gcc versions at
+ # least as old as 3.4.3 support -shared, so just
+ # use that with Solaris 11 and later, but keep
+ # the old behavior for older Solaris versions.
+ case "$gccversion" in
+ '') dflt='-G' ;;
+ *) case "$osvers" in
+ 2.?|2.10) dflt='-G' ;;
+ *) dflt='-shared' ;;
+ esac
+ ;;
+ esac
+ ;;
sunos) dflt='-assert nodefinitions' ;;
svr4*|esix*|nonstopux) dflt="-G $ldflags" ;;
*) dflt='none' ;;
: determine where manual pages are on this system
echo " "
case "$sysman" in
-'')
+'')
syspath='/usr/share/man/man1 /usr/man/man1'
syspath="$syspath /usr/man/mann /usr/man/manl /usr/man/local/man1"
syspath="$syspath /usr/man/u_man/man1"
cont=x
while test "$cont"; do
case "$MAILDOMAIN" in
- '') maildomain="$myhostname$mydomain";;
+ '')
+ if $test -s /etc/mailname; then
+ maildomain=`$cat /etc/mailname`
+ else
+ maildomain="$myhostname$mydomain"
+ fi
+ ;;
*) maildomain="$MAILDOMAIN";;
esac
case "$cf_email" in
valstd="$undef"
fi
-: see if varags is available
+: see if varargs is available
echo " "
if $test `./findhdr varargs.h`; then
echo "<varargs.h> found." >&4
: now check which varargs header should be included
echo " "
i_varhdr=''
-val=""
+val=''
case "$valstd" in
"$define")
if `./varargs I_STDARG`; then
#endif
#endif
#endif
-#endif
+#endif
int main() {
DIR *dirp = opendir(".");
if (dirfd(dirp) >= 0)
$rm -f $$.h
;;
*)
- val="$undef";
+ val="$undef";
set d_pwquota; eval $setvar
set d_pwage; eval $setvar
set d_pwchange; eval $setvar
if eval $compile_ok; then
val="$define"
else
- echo "But you don't seem to have a useable struct sigaction." >&4
+ echo "But you don't seem to have a usable struct sigaction." >&4
val="$undef"
fi
else
# Respect a hint (or previous) value for perl_static_inline, if there is one.
case "$perl_static_inline" in
'') # Check the various possibilities, and break out on success.
- # For gcc, prefer __inline__, which will still permit
+ # For gcc, prefer __inline__, which will still permit
# cflags.SH to add in -ansi.
case "$gccversion" in
'') xxx="inline __inline__ __inline _inline";;
echo 'strerror() found.' >&4
d_strerror="$define"
d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(You also have sys_errlist[], so we could roll our own strerror.)"
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(You also have sys_errlist[], so we could roll our own strerror.)"
d_syserrlst="$define"
else
- echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
+ echo "(Since you don't have sys_errlist[], strerror() is welcome.)"
d_syserrlst="$undef"
fi
elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
echo 'strerror() found in string header.' >&4
d_strerror="$define"
d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
d_syserrlst="$define"
else
: set the base revision
baserev=5.0
-: length of character in bytes. Is always 1, otherwise it isnt C
+: Determine if this is an EBCDIC system
+echo " "
+echo "Determining whether or not we are on an EBCDIC system..." >&4
+$cat >try.c <<'EOM'
+int main()
+{
+ if ('M'==0xd4) return 0;
+ return 1;
+}
+EOM
+
+case "$BOOTSTRAP_CHARSET" in
+ Y|y|define) bootstrap_charset=$define ;;
+ *) bootstrap_charset=$undef ;;
+esac
+
+val=$undef
+set try
+if eval $compile_ok; then
+ if $run ./try; then
+ echo "You seem to speak EBCDIC." >&4
+ val="$define"
+ else
+ echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8." >&4
+ fi
+else
+ echo "I'm unable to compile the test program." >&4
+ echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
+fi
+$rm_try
+set ebcdic
+eval $setvar
+
+: length of character in bytes. Is always 1, otherwise it is not C
: This used to be a test using sizeof
charsize=1
echo "OK, found random()." >&4
else
dflt="rand"
- echo "Yick, looks like I have to use rand()." >&4
+ echo "Yuck, looks like I have to use rand()." >&4
fi
echo " "
;;
esac
done
-: Determine if this is an EBCDIC system
-echo " "
-echo "Determining whether or not we are on an EBCDIC system..." >&4
-$cat >try.c <<'EOM'
-int main()
-{
- if ('M'==0xd4) return 0;
- return 1;
-}
-EOM
-
-val=$undef
-set try
-if eval $compile_ok; then
- if $run ./try; then
- echo "You seem to speak EBCDIC." >&4
- val="$define"
- else
- echo "Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8." >&4
- fi
-else
- echo "I'm unable to compile the test program." >&4
- echo "I'll assume ASCII or some ISO Latin. Or UTF8." >&4
-fi
-$rm_try
-set ebcdic
-eval $setvar
-
: Check how to flush
echo " "
$cat >&4 <<EOM
;;
esac
fi
-: check for fflush NULL behaviour
+: check for fflush NULL behavior
case "$fflushNULL" in
'') set try -DTRY_FFLUSH_NULL $output
if eval $compile; then
$rm_try
;;
*) echo "You don't have <stdarg.h>, not checking for va_copy()." >&4
+ need_va_copy="$undef"
;;
esac
*-y*) ;;
*)
yacc="$yacc -y"
- echo "(Adding -y option to bison to get yacc-compatible behaviour.)"
+ echo "(Adding -y option to bison to get yacc-compatible behavior.)"
;;
esac
;;
chmod +x Cppsym.try
$eunicefix Cppsym.try
./Cppsym < Cppsym.know | $sort | $uniq > Cppsym.true
-: Add in any linux cpp "predefined macros":
+: Add in any Linux cpp "predefined macros":
case "$osname::$gccversion" in
*linux*::*.*|*gnukfreebsd*::*.*|gnu::*.*)
tHdrH=_tmpHdr
DynaLoader|dynaload) ;;
*)
this_ext=`echo $xxx | $sed -e s/-/\\\//g`;
- leaf=`echo $xxx | $sed -e s/.*-//`;
- if $test -d File; then
- if $test -f $xxx/$leaf.xs -o -f $xxx/$leaf.c; then
- known_extensions="$known_extensions $1$this_ext";
- elif $test -f $xxx/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $1$this_ext";
- else
- if $test -d $xxx -a $# -lt 10; then
- set $1$xxx/ $*;
- cd "$xxx";
- eval $find_extensions;
- cd ..;
- shift;
- fi;
- fi;
- else
- echo " $known_extensions $nonxs_extensions" > $$.tmp;
- if $contains " $this_ext " $$.tmp; then
- echo >&4;
- echo "Duplicate directories detected for extension $xxx" >&4;
- echo "Configure cannot correctly recover from this - shall I abort?" >&4;
- case "$knowitall" in
- "") dflt=y;;
- *) dflt=n;;
- esac;
- . ../UU/myread;
- case "$ans" in
- n*|N*) ;;
- *) echo >&4;
- echo "Ok. Stopping Configure." >&4;
- echo "Please remove the duplicate directory (eg using git clean) and then re-run Configure" >&4;
- exit 1;;
- esac;
- echo "Ok. You will need to correct config.sh before running make." >&4;
- fi;
- $ls -1 $xxx > $$.tmp;
- if $contains "\.xs$" $$.tmp > /dev/null 2>&1; then
- known_extensions="$known_extensions $this_ext";
- elif $contains "\.c$" $$.tmp > /dev/null 2>&1; then
- known_extensions="$known_extensions $this_ext";
- elif $test -d $xxx; then
- nonxs_extensions="$nonxs_extensions $this_ext";
- fi;
- $rm -f $$.tmp;
- fi
+ echo " $known_extensions $nonxs_extensions" > $$.tmp;
+ if $contains " $this_ext " $$.tmp; then
+ echo >&4;
+ echo "Duplicate directories detected for extension $xxx" >&4;
+ echo "Configure cannot correctly recover from this - shall I abort?" >&4;
+ case "$knowitall" in
+ "") dflt=y;;
+ *) dflt=n;;
+ esac;
+ . ../UU/myread;
+ case "$ans" in
+ n*|N*) ;;
+ *) echo >&4;
+ echo "Ok. Stopping Configure." >&4;
+ echo "Please remove the duplicate directory (e.g. using git clean) and then re-run Configure" >&4;
+ exit 1;;
+ esac;
+ echo "Ok. You will need to correct config.sh before running make." >&4;
+ fi;
+ $ls -1 $xxx > $$.tmp;
+ if $contains "\.xs$" $$.tmp > /dev/null 2>&1; then
+ known_extensions="$known_extensions $this_ext";
+ elif $contains "\.c$" $$.tmp > /dev/null 2>&1; then
+ known_extensions="$known_extensions $this_ext";
+ elif $test -d $xxx; then
+ nonxs_extensions="$nonxs_extensions $this_ext";
+ fi;
+ $rm -f $$.tmp;
;;
esac;
done'
set X
shift
eval $find_extensions
-if $test -d File-Glob; then
- : All ext/ flattened
-else
- # Special case: Add in modules that nest beyond the first level.
- # Currently threads/shared and Hash/Util/FieldHash, since they are
- # not picked up by the recursive find above (and adding in general
- # recursive finding breaks SDBM_File/sdbm).
- # A.D. 20011025 (SDBM), ajgough 20071008 (FieldHash)
- known_extensions="$known_extensions threads/shared Hash/Util/FieldHash"
-fi
set X $known_extensions
shift
known_extensions=`echo "$*" | tr ' ' $trnl | $sort | tr $trnl ' '`
;;
*) case "$usedl" in
$define|true|[yY]*)
- set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -lgdbm_compat @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
+ set X `echo " $libs " | sed -e 's@ -lndbm @ @' -e 's@ -lgdbm @ @' -e 's@ -lgdbm_compat @ @' -e 's@ -ldbm @ @' -e 's@ -ldb @ @'`
shift
perllibs="$*"
;;
bin_ELF='$bin_ELF'
binexp='$binexp'
bison='$bison'
+bootstrap_charset='$bootstrap_charset'
byacc='$byacc'
byteorder='$byteorder'
c='$c'
https://perl5.git.perl.org / perl5.git / blobdiff