# endif
#endif
-/* This logic needs to come after reading config.h, but before including
- proto.h */
-#ifdef IAMSUID
-# ifndef DOSUID
-# define DOSUID
-# endif
-#endif
-
-#ifdef SETUID_SCRIPTS_ARE_SECURE_NOW
-# ifdef DOSUID
-# undef DOSUID
-# endif
-# ifdef IAMSUID
-# undef IAMSUID
-# define SETUID_SCRIPTS_ARE_SECURE_NOW_AND_IAMSUID
-# endif
-#endif
-
/* See L<perlguts/"The Perl API"> for detailed notes on
* PERL_IMPLICIT_CONTEXT and PERL_IMPLICIT_SYS */
# endif
#endif
+#undef START_EXTERN_C
+#undef END_EXTERN_C
+#undef EXTERN_C
+#ifdef __cplusplus
+# define START_EXTERN_C extern "C" {
+# define END_EXTERN_C }
+# define EXTERN_C extern "C"
+#else
+# define START_EXTERN_C
+# define END_EXTERN_C
+# define EXTERN_C extern
+#endif
+
#ifdef PERL_GLOBAL_STRUCT
# ifndef PERL_GET_VARS
# ifdef PERL_GLOBAL_STRUCT_PRIVATE
- extern struct perl_vars* Perl_GetVarsPrivate();
+ EXTERN_C struct perl_vars* Perl_GetVarsPrivate();
# define PERL_GET_VARS() Perl_GetVarsPrivate() /* see miniperlmain.c */
# ifndef PERLIO_FUNCS_CONST
# define PERLIO_FUNCS_CONST /* Can't have these lying around. */
# endif
#endif
-#undef START_EXTERN_C
-#undef END_EXTERN_C
-#undef EXTERN_C
-#ifdef __cplusplus
-# define START_EXTERN_C extern "C" {
-# define END_EXTERN_C }
-# define EXTERN_C extern "C"
-#else
-# define START_EXTERN_C
-# define END_EXTERN_C
-# define EXTERN_C extern
-#endif
-
/* Some platforms require marking function declarations
* for them to be exportable. Used in perlio.h, proto.h
* is handled either by the makedef.pl or by defining the
# include <unistd.h>
#endif
+/* for WCOREDUMP */
+#ifdef I_SYS_WAIT
+# include <sys/wait.h>
+#endif
+
#ifdef __SYMBIAN32__
# undef _SC_ARG_MAX /* Symbian has _SC_ARG_MAX but no sysconf() */
#endif
#define PERL_USES_PL_PIDSTATUS
#endif
-#if !defined(OS2) && !defined(WIN32) && !defined(DJGPP) && !defined(EPOC) && !defined(__SYMBIAN32__) && !defined(MACOS_TRADITIONAL)
+#if !defined(OS2) && !defined(WIN32) && !defined(DJGPP) && !defined(EPOC) && !defined(__SYMBIAN32__)
#define PERL_DEFAULT_DO_EXEC3_IMPLEMENTATION
#endif
# include <sys/stat.h>
#endif
+/* Microsoft VC's sys/stat.h defines all S_Ixxx macros except S_IFIFO.
+ This definition should ideally go into win32/win32.h, but S_IFIFO is
+ used later here in perl.h before win32/win32.h is being included. */
+#if !defined(S_IFIFO) && defined(_S_IFIFO)
+# define S_IFIFO _S_IFIFO
+#endif
+
/* The stat macros for Amdahl UTS, Unisoft System V/88 (and derivatives
like UTekV) are broken, sometimes giving false positives. Undefine
them here and let the code below set them to proper values.
set_errno(errcode); \
set_vaxc_errno(vmserrcode); \
} STMT_END
+# define dSAVEDERRNO int saved_errno; unsigned saved_vms_errno
+# define dSAVE_ERRNO int saved_errno = errno; unsigned saved_vms_errno = vaxc$errno
+# define SAVE_ERRNO ( saved_errno = errno, saved_vms_errno = vaxc$errno )
+# define RESTORE_ERRNO SETERRNO(saved_errno, saved_vms_errno)
+
# define LIB_INVARG LIB$_INVARG
# define RMS_DIR RMS$_DIR
# define RMS_FAC RMS$_FAC
# define SS_NORMAL SS$_NORMAL
#else
# define SETERRNO(errcode,vmserrcode) (errno = (errcode))
+# define dSAVEDERRNO int saved_errno
+# define dSAVE_ERRNO int saved_errno = errno
+# define SAVE_ERRNO (saved_errno = errno)
+# define RESTORE_ERRNO (errno = saved_errno)
+
# define LIB_INVARG 0
# define RMS_DIR 0
# define RMS_FAC 0
#endif
#define ERRSV GvSV(PL_errgv)
-/* FIXME? Change the assignments to PL_defgv to instantiate GvSV? */
-#define DEFSV GvSVn(PL_defgv)
+#ifdef PERL_CORE
+# define DEFSV (0 + GvSVn(PL_defgv))
+#else
+# define DEFSV GvSVn(PL_defgv)
+#endif
+#define DEFSV_set(sv) (GvSV(PL_defgv) = (sv))
#define SAVE_DEFSV SAVESPTR(GvSV(PL_defgv))
#define ERRHV GvHV(PL_errgv) /* XXX unused, here for compatibility */
# endif
#endif
-#if defined(OS2) || defined(MACOS_TRADITIONAL)
+#if defined(OS2)
# include "iperlsys.h"
#endif
# define ISHISH "symbian"
#endif
-#if defined(MACOS_TRADITIONAL)
-# include "macos/macish.h"
-# ifndef NO_ENVIRON_ARRAY
-# define NO_ENVIRON_ARRAY
-# endif
-# define ISHISH "macos classic"
-#endif
#if defined(__HAIKU__)
# include "haiku/haikuish.h"
# define PERL_SYS_INIT3_BODY(argvp,argcp,envp) PERL_SYS_INIT_BODY(argvp,argcp)
#endif
+/*
+=for apidoc Am|void|PERL_SYS_INIT|int argc|char** argv
+Provides system-specific tune up of the C runtime environment necessary to
+run Perl interpreters. This should be called only once, before creating
+any Perl interpreters.
+
+=for apidoc Am|void|PERL_SYS_INIT3|int argc|char** argv|char** env
+Provides system-specific tune up of the C runtime environment necessary to
+run Perl interpreters. This should be called only once, before creating
+any Perl interpreters.
+
+=for apidoc Am|void|PERL_SYS_TERM|
+Provides system-specific clean up of the C runtime environment after
+running Perl interpreters. This should be called only once, after
+freeing any remaining Perl interpreters.
+
+=cut
+ */
+
#define PERL_SYS_INIT(argc, argv) Perl_sys_init(argc, argv)
#define PERL_SYS_INIT3(argc, argv, env) Perl_sys_init3(argc, argv, env)
#define PERL_SYS_TERM() Perl_sys_term()
#ifndef PERL_MICRO
#if defined __GNUC__ && !defined(__INTEL_COMPILER)
+# if __GNUC__ == 3 && __GNUC_MINOR__ >= 1 || __GNUC__ > 3 /* 3.1 -> */
+# define HASATTRIBUTE_DEPRECATED
+# endif
# if __GNUC__ >= 3 /* 3.0 -> */ /* XXX Verify this version */
# define HASATTRIBUTE_FORMAT
# if defined __MINGW32__
} STMT_END
/* STATUS_UNIX_EXIT_SET - Takes a UNIX/POSIX exit code and sets
- * the NATIVE error status based on it. It does not assume that
- * the UNIX/POSIX exit codes have any relationship to errno, except
- * that 0 indicates a success. When in the default mode to comply
- * with the Perl VMS documentation, any other code sets the NATIVE
- * status to a failure code of SS$_ABORT.
+ * the NATIVE error status based on it.
+ *
+ * When in the default mode to comply with the Perl VMS documentation,
+ * 0 is a success and any other code sets the NATIVE status to a failure
+ * code of SS$_ABORT.
*
* In the new POSIX EXIT mode, native status will be set so that the
* actual exit code will can be retrieved by the calling program or
STMT_START { \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
- if (evalue != -1) { \
- if (evalue <= 0xFF00) { \
- if (evalue > 0xFF) \
- evalue = (evalue >> child_offset_bits) & 0xFF; \
- if (evalue == 0) \
- PL_statusvalue_vms == SS$_NORMAL; \
- else \
- if (MY_POSIX_EXIT) \
- PL_statusvalue_vms = \
- (C_FAC_POSIX | (evalue << 3 ) | (evalue == 1)? \
- (STS$K_ERROR | STS$M_INHIB_MSG) : 1); \
- else \
- PL_statusvalue_vms = SS$_ABORT; \
- } else { /* forgive them Perl, for they have sinned */ \
- if (evalue != EVMSERR) PL_statusvalue_vms = evalue; \
- else PL_statusvalue_vms = vaxc$errno; \
- /* And obviously used a VMS status value instead of UNIX */ \
- PL_statusvalue = EVMSERR; \
- } \
- } \
- else PL_statusvalue_vms = SS$_ABORT; \
- set_vaxc_errno(PL_statusvalue_vms); \
+ if (MY_POSIX_EXIT) { \
+ if (evalue <= 0xFF00) { \
+ if (evalue > 0xFF) \
+ evalue = (evalue >> child_offset_bits) & 0xFF; \
+ PL_statusvalue_vms = \
+ (C_FAC_POSIX | (evalue << 3 ) | \
+ ((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1)); \
+ } else /* forgive them Perl, for they have sinned */ \
+ PL_statusvalue_vms = evalue; \
+ } else { \
+ if (evalue == 0) \
+ PL_statusvalue_vms = SS$_NORMAL; \
+ else if (evalue <= 0xFF00) \
+ PL_statusvalue_vms = SS$_ABORT; \
+ else { /* forgive them Perl, for they have sinned */ \
+ if (evalue != EVMSERR) PL_statusvalue_vms = evalue; \
+ else PL_statusvalue_vms = vaxc$errno; \
+ /* And obviously used a VMS status value instead of UNIX */ \
+ PL_statusvalue = EVMSERR; \
+ } \
+ set_vaxc_errno(PL_statusvalue_vms); \
+ } \
} STMT_END
+
/* STATUS_EXIT_SET - Takes a NATIVE/UNIX/POSIX exit code
* and sets the NATIVE error status based on it. This special case
* is needed to maintain compatibility with past VMS behavior.
* actual exit code will can be retrieved by the calling program or
* shell.
*
+ * A POSIX exit code is from 0 to 255. If the exit code is higher
+ * than this, it needs to be assumed that it is a VMS exit code and
+ * passed through.
*/
# define STATUS_EXIT_SET(n) \
I32 evalue = (I32)n; \
PL_statusvalue = evalue; \
if (MY_POSIX_EXIT) \
- PL_statusvalue_vms = \
- (C_FAC_POSIX | (evalue << 3 ) | (evalue == 1)? \
- (STS$K_ERROR | STS$M_INHIB_MSG) : 1); \
+ if (evalue > 255) PL_statusvalue_vms = evalue; else { \
+ PL_statusvalue_vms = \
+ (C_FAC_POSIX | (evalue << 3 ) | \
+ ((evalue == 1) ? (STS$K_ERROR | STS$M_INHIB_MSG) : 1));} \
else \
PL_statusvalue_vms = evalue ? evalue : SS$_NORMAL; \
set_vaxc_errno(PL_statusvalue_vms); \
# define MEMBER_TO_FPTR(name) name
#endif
+#ifndef PERL_CORE
/* format to use for version numbers in file/directory names */
/* XXX move to Configure? */
-#ifndef PERL_FS_VER_FMT
-# define PERL_FS_VER_FMT "%d.%d.%d"
+/* This was only ever used for the current version, and that can be done at
+ compile time, as PERL_FS_VERSION, so should we just delete it? */
+# ifndef PERL_FS_VER_FMT
+# define PERL_FS_VER_FMT "%d.%d.%d"
+# endif
+#endif
+
+#ifndef PERL_FS_VERSION
+# define PERL_FS_VERSION PERL_VERSION_STRING
#endif
/* This defines a way to flush all output buffers. This may be a
# endif
#endif
+#ifdef HASATTRIBUTE_DEPRECATED
+# define __attribute__deprecated__ __attribute__((deprecated))
+#endif
#ifdef HASATTRIBUTE_FORMAT
# define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
#endif
#endif
/* If we haven't defined the attributes yet, define them to blank. */
+#ifndef __attribute__deprecated__
+# define __attribute__deprecated__
+#endif
#ifndef __attribute__format__
# define __attribute__format__(x,y,z)
#endif
#endif /* threading */
#endif /* AIX */
-#if !defined(OS2) && !defined(MACOS_TRADITIONAL)
+#if !defined(OS2)
# include "iperlsys.h"
#endif
#define HINT_FILETEST_ACCESS 0x00400000 /* filetest pragma */
#define HINT_UTF8 0x00800000 /* utf8 pragma */
+#define HINT_NO_AMAGIC 0x01000000 /* overloading pragma */
+
/* The following are stored in $^H{sort}, not in PL_hints */
#define HINT_SORT_SORT_BITS 0x000000FF /* allow 256 different ones */
#define HINT_SORT_QUICKSORT 0x00000001
#include "patchlevel.h"
#undef PERL_PATCHLEVEL_H_IMPLICIT
+#define PERL_VERSION_STRING STRINGIFY(PERL_REVISION) "." \
+ STRINGIFY(PERL_VERSION) "." \
+ STRINGIFY(PERL_SUBVERSION)
+
#ifdef PERL_GLOBAL_STRUCT
struct perl_vars {
# include "perlvars.h"
PERLDBf_SUBLINE| PERLDBf_SINGLE| \
PERLDBf_NAMEEVAL| PERLDBf_NAMEANON | \
PERLDBf_SAVESRC)
- /* No _NONAME, _GOTO, _ASSERTION */
+ /* No _NONAME, _GOTO */
#define PERLDBf_SUB 0x01 /* Debug sub enter/exit */
#define PERLDBf_LINE 0x02 /* Keep line # */
#define PERLDBf_NOOPT 0x04 /* Switch off optimizations */
#define PERLDBf_NAMEEVAL 0x100 /* Informative names for evals */
#define PERLDBf_NAMEANON 0x200 /* Informative names for anon subs */
#define PERLDBf_SAVESRC 0x400 /* Save source lines into @{"_<$filename"} */
+#define PERLDBf_SAVESRC_NOSUBS 0x800 /* Including evals that generate no subrouties */
+#define PERLDBf_SAVESRC_INVALID 0x1000 /* Save source that did not compile */
#define PERLDB_SUB (PL_perldb && (PL_perldb & PERLDBf_SUB))
#define PERLDB_LINE (PL_perldb && (PL_perldb & PERLDBf_LINE))
#define PERLDB_GOTO (PL_perldb && (PL_perldb & PERLDBf_GOTO))
#define PERLDB_NAMEEVAL (PL_perldb && (PL_perldb & PERLDBf_NAMEEVAL))
#define PERLDB_NAMEANON (PL_perldb && (PL_perldb & PERLDBf_NAMEANON))
-#define PERLDB_ASSERTION (PL_perldb && (PL_perldb & PERLDBf_ASSERTION))
#define PERLDB_SAVESRC (PL_perldb && (PL_perldb & PERLDBf_SAVESRC))
+#define PERLDB_SAVESRC_NOSUBS (PL_perldb && (PL_perldb & PERLDBf_SAVESRC_NOSUBS))
+#define PERLDB_SAVESRC_INVALID (PL_perldb && (PL_perldb & PERLDBf_SAVESRC_INVALID))
#ifdef USE_LOCALE_NUMERIC
# endif
#endif
-#ifdef IAMSUID
-
-#ifdef I_SYS_STATVFS
-# if defined(PERL_SCO) && !defined(_SVID3)
-# define _SVID3
-# endif
-# include <sys/statvfs.h> /* for f?statvfs() */
-#endif
-#ifdef I_SYS_MOUNT
-# include <sys/mount.h> /* for *BSD f?statfs() */
-#endif
-#ifdef I_MNTENT
-# include <mntent.h> /* for getmntent() */
-#endif
-#ifdef I_SYS_STATFS
-# include <sys/statfs.h> /* for some statfs() */
-#endif
-#ifdef I_SYS_VFS
-# ifdef __sgi
-# define sv IRIX_sv /* kludge: IRIX has an sv of its own */
-# endif
-# include <sys/vfs.h> /* for some statfs() */
-# ifdef __sgi
-# undef IRIX_sv
-# endif
-#endif
-#ifdef I_USTAT
-# include <ustat.h> /* for ustat() */
-#endif
-
-#if !defined(PERL_MOUNT_NOSUID) && defined(MOUNT_NOSUID)
-# define PERL_MOUNT_NOSUID MOUNT_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(MNT_NOSUID)
-# define PERL_MOUNT_NOSUID MNT_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(MS_NOSUID)
-# define PERL_MOUNT_NOSUID MS_NOSUID
-#endif
-#if !defined(PERL_MOUNT_NOSUID) && defined(M_NOSUID)
-# define PERL_MOUNT_NOSUID M_NOSUID
-#endif
-
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MOUNT_NOEXEC)
-# define PERL_MOUNT_NOEXEC MOUNT_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MNT_NOEXEC)
-# define PERL_MOUNT_NOEXEC MNT_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(MS_NOEXEC)
-# define PERL_MOUNT_NOEXEC MS_NOEXEC
-#endif
-#if !defined(PERL_MOUNT_NOEXEC) && defined(M_NOEXEC)
-# define PERL_MOUNT_NOEXEC M_NOEXEC
-#endif
-
-#endif /* IAMSUID */
-
#ifdef I_LIBUTIL
# include <libutil.h> /* setproctitle() in some FreeBSDs */
#endif
https://perl5.git.perl.org / perl5.git / blobdiff