/* op.h
*
- * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- * 2000, 2001, 2002, 2003, 2004, 2005, 2006 by Larry Wall and others
+ * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ * 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
* op_type The type of the operation.
* op_opt Whether or not the op has been optimised by the
* peephole optimiser.
- * op_static Whether or not the op is statically defined.
- * This flag is used by the B::C compiler backend
- * and indicates that the op should not be freed.
*
* See the comments in S_clear_yystack() for more
* details on the following three flags:
-
+ *
* op_latefree tell op_free() to clear this op (and free any kids)
* but not yet deallocate the struct. This means that
* the op may be safely op_free()d multiple times
* op_latefreed an op_latefree op has been op_free()d
* op_attached this op (sub)tree has been attached to a CV
*
- * op_spare two spare bits!
+ * op_spare three spare bits!
* op_flags Flags common to all operations. See OPf_* below.
* op_private Flags peculiar to a particular operation (BUT,
* by default, set to the number of children until
* the operation is privatized by a check routine,
* which may or may not check number of children).
*/
+#include "op_reg_common.h"
-#ifdef DEBUGGING_OPS
-#define OPCODE opcode
-#else
#define OPCODE U16
-#endif
#ifdef PERL_MAD
# define MADPROP_IN_BASEOP MADPROP* op_madprop;
# define MADPROP_IN_BASEOP
#endif
+typedef PERL_BITFIELD16 Optype;
+
#ifdef BASEOP_DEFINITION
#define BASEOP BASEOP_DEFINITION
#else
#define BASEOP \
OP* op_next; \
OP* op_sibling; \
- OP* (CPERLscope(*op_ppaddr))(pTHX); \
+ OP* (*op_ppaddr)(pTHX); \
MADPROP_IN_BASEOP \
PADOFFSET op_targ; \
- unsigned op_type:9; \
- unsigned op_opt:1; \
- unsigned op_static:1; \
- unsigned op_latefree:1; \
- unsigned op_latefreed:1; \
- unsigned op_attached:1; \
- unsigned op_spare:2; \
+ PERL_BITFIELD16 op_type:9; \
+ PERL_BITFIELD16 op_opt:1; \
+ PERL_BITFIELD16 op_latefree:1; \
+ PERL_BITFIELD16 op_latefreed:1; \
+ PERL_BITFIELD16 op_attached:1; \
+ PERL_BITFIELD16 op_spare:3; \
U8 op_flags; \
U8 op_private;
#endif
+/* If op_type:9 is changed to :10, also change PUSHEVAL in cop.h.
+ Also, if the type of op_type is ever changed (e.g. to PERL_BITFIELD32)
+ then all the other bit-fields before/after it should change their
+ types too to let VC pack them into the same 4 byte integer.*/
+
#define OP_GIMME(op,dfl) \
(((op)->op_flags & OPf_WANT) == OPf_WANT_VOID ? G_VOID : \
((op)->op_flags & OPf_WANT) == OPf_WANT_SCALAR ? G_SCALAR : \
((op)->op_flags & OPf_WANT) == OPf_WANT_LIST ? G_ARRAY : \
dfl)
+#define OP_GIMME_REVERSE(flags) ((flags) & G_WANT)
+
/*
=head1 "Gimme" Values
=for apidoc Amn|U32|GIMME_V
The XSUB-writer's equivalent to Perl's C<wantarray>. Returns C<G_VOID>,
C<G_SCALAR> or C<G_ARRAY> for void, scalar or list context,
-respectively.
+respectively. See L<perlcall> for a usage example.
=for apidoc Amn|U32|GIMME
A backward-compatible version of C<GIMME_V> which can only return
#define OPf_STACKED 64 /* Some arg is arriving on the stack. */
#define OPf_SPECIAL 128 /* Do something weird for this op: */
/* On local LVAL, don't init local value. */
- /* On OP_CONST, value is the hints hash for
- eval, so return a copy from pp_const() */
/* On OP_SORT, subroutine is inlined. */
/* On OP_NOT, inversion was implicit. */
/* On OP_LEAVE, don't restore curpm. */
/* On OP_ENTERSUB || OP_NULL, saw a "do". */
/* On OP_EXISTS, treat av as av, not avhv. */
/* On OP_(ENTER|LEAVE)EVAL, don't clear $@ */
- /* On OP_ENTERITER, loop var is per-thread */
- /* On pushre, re is /\s+/ imp. by split " " */
+ /* On pushre, rx is used as part of split, e.g. split " " */
/* On regcomp, "use re 'eval'" was in scope */
/* On OP_READLINE, was <$filehandle> */
/* On RV2[ACGHS]V, don't create GV--in
defined()*/
/* On OP_DBSTATE, indicates breakpoint
* (runtime property) */
- /* On OP_AELEMFAST, indiciates pad var */
+ /* On OP_AELEMFAST, indicates pad var */
/* On OP_REQUIRE, was seen as CORE::require */
/* On OP_ENTERWHEN, there's no condition */
/* On OP_BREAK, an implicit break */
/* On OP_SMARTMATCH, an implicit smartmatch */
/* On OP_ANONHASH and OP_ANONLIST, create a
reference to the new anon hash or array */
+ /* On OP_ENTER, store caller context */
+ /* On OP_HELEM and OP_HSLICE, localization will be followed
+ by assignment, so do not wipe the target if it is special
+ (e.g. a glob or a magic SV) */
+ /* On OP_MATCH, OP_SUBST & OP_TRANS, the
+ operand of a logical or conditional
+ that was optimised away, so it should
+ not be bound via =~ */
+ /* On OP_CONST, from a constant CV */
+ /* On OP_GLOB, use Perl glob function */
/* old names; don't use in new code, but don't break them, either */
#define OPf_LIST OPf_WANT_LIST
: G_SCALAR) \
: dowantarray())
-/* NOTE: OP_NEXTSTATE, OP_DBSTATE, and OP_SETSTATE (i.e. COPs) carry lower
+/* NOTE: OP_NEXTSTATE and OP_DBSTATE (i.e. COPs) carry lower
* bits of PL_hints in op_private */
/* Private for lvalues */
#define OPpDEREF_AV 32 /* Want ref to AV. */
#define OPpDEREF_HV 64 /* Want ref to HV. */
#define OPpDEREF_SV (32|64) /* Want ref to SV. */
+/* Private for OP_RV2SV, OP_RV2AV, OP_RV2AV */
+#define OPpDEREFed 4 /* prev op was OPpDEREF */
/* OP_ENTERSUB only */
#define OPpENTERSUB_DB 16 /* Debug subroutine. */
#define OPpENTERSUB_HASTARG 32 /* Called from OP tree. */
-#define OPpENTERSUB_NOMOD 64 /* Immune to mod() for :attrlist. */
- /* OP_RV2CV only */
+#define OPpENTERSUB_NOMOD 64 /* Immune to op_lvalue() for :attrlist. */
+ /* OP_ENTERSUB and OP_RV2CV only */
#define OPpENTERSUB_AMPER 8 /* Used & form to call. */
#define OPpENTERSUB_NOPAREN 128 /* bare sub call (without parens) */
#define OPpENTERSUB_INARGS 4 /* Lval used as arg to a sub. */
/* Private for OP_CONST */
#define OPpCONST_NOVER 2 /* no 6; */
#define OPpCONST_SHORTCIRCUIT 4 /* eg the constant 5 in (5 || foo) */
-#define OPpCONST_STRICT 8 /* bearword subject to strict 'subs' */
+#define OPpCONST_STRICT 8 /* bareword subject to strict 'subs' */
#define OPpCONST_ENTERED 16 /* Has been entered as symbol. */
#define OPpCONST_ARYBASE 32 /* Was a $[ translated to constant. */
#define OPpCONST_BARE 64 /* Was a bare word (filehandle?). */
/* Private for OP_DELETE */
#define OPpSLICE 64 /* Operating on a list of keys */
+/* Also OPpLVAL_INTRO (128) */
/* Private for OP_EXISTS */
#define OPpEXISTS_SUB 64 /* Checking for &sub, not {} or []. */
#define OPpSORT_QSORT 32 /* Use quicksort (not mergesort) */
#define OPpSORT_STABLE 64 /* Use a stable algorithm */
-/* Private for OP_THREADSV */
-#define OPpDONE_SVREF 64 /* Been through newSVREF once */
+/* Private for OP_REVERSE */
+#define OPpREVERSE_INPLACE 8 /* reverse in-place (@a = reverse @a) */
/* Private for OP_OPEN and OP_BACKTICK */
#define OPpOPEN_IN_RAW 16 /* binmode(F,":raw") on input fh */
/* Private for OP_FTXXX */
#define OPpFT_ACCESS 2 /* use filetest 'access' */
#define OPpFT_STACKED 4 /* stacked filetest, as in "-f -x $f" */
-#define OP_IS_FILETEST_ACCESS(op) \
- (((op)->op_type) == OP_FTRREAD || \
- ((op)->op_type) == OP_FTRWRITE || \
- ((op)->op_type) == OP_FTREXEC || \
- ((op)->op_type) == OP_FTEREAD || \
- ((op)->op_type) == OP_FTEWRITE || \
- ((op)->op_type) == OP_FTEEXEC)
/* Private for OP_(MAP|GREP)(WHILE|START) */
#define OPpGREP_LEX 2 /* iterate over lexical $_ */
#else
REGEXP * op_pmregexp; /* compiled expression */
#endif
- U32 op_pmflags;
+ U32 op_pmflags;
union {
OP * op_pmreplroot; /* For OP_SUBST */
#ifdef USE_ITHREADS
};
#ifdef USE_ITHREADS
-#define PM_GETRE(o) (INT2PTR(REGEXP*,SvIVX(PL_regex_pad[(o)->op_pmoffset])))
-#define PM_SETRE(o,r) STMT_START { \
- SV* const sv = PL_regex_pad[(o)->op_pmoffset]; \
- sv_setiv(sv, PTR2IV(r)); \
+#define PM_GETRE(o) (SvTYPE(PL_regex_pad[(o)->op_pmoffset]) == SVt_REGEXP \
+ ? (REGEXP*)(PL_regex_pad[(o)->op_pmoffset]) : NULL)
+/* The assignment is just to enforce type safety (or at least get a warning).
+ */
+/* With first class regexps not via a reference one needs to assign
+ &PL_sv_undef under ithreads. (This would probably work unthreaded, but NULL
+ is cheaper. I guess we could allow NULL, but the check above would get
+ more complex, and we'd have an AV with (SV*)NULL in it, which feels bad */
+/* BEWARE - something that calls this macro passes (r) which has a side
+ effect. */
+#define PM_SETRE(o,r) STMT_START { \
+ REGEXP *const _pm_setre = (r); \
+ assert(_pm_setre); \
+ PL_regex_pad[(o)->op_pmoffset] = MUTABLE_SV(_pm_setre); \
} STMT_END
-#define PM_GETRE_SAFE(o) (PL_regex_pad ? PM_GETRE(o) : (REGEXP*)0)
-#define PM_SETRE_SAFE(o,r) if (PL_regex_pad) PM_SETRE(o,r)
#else
#define PM_GETRE(o) ((o)->op_pmregexp)
#define PM_SETRE(o,r) ((o)->op_pmregexp = (r))
-#define PM_GETRE_SAFE PM_GETRE
-#define PM_SETRE_SAFE PM_SETRE
#endif
+/* Leave some space, so future bit allocations can go either in the shared or
+ * unshared area without affecting binary compatibility */
+#define PMf_BASE_SHIFT (_RXf_PMf_SHIFT_NEXT+6)
-#define PMf_RETAINT 0x0001 /* taint $1 etc. if target tainted */
-#define PMf_ONCE 0x0002 /* match successfully only once per
- reset, with related flag RXf_USED
- in re->extflags holding state.
- This is used only for ?? matches,
- and only on OP_MATCH and OP_QR */
+/* taint $1 etc. if target tainted */
+#define PMf_RETAINT (1<<(PMf_BASE_SHIFT+0))
-#define PMf_UNUSED 0x0004 /* free for use */
-#define PMf_MAYBE_CONST 0x0008 /* replacement contains variables */
+/* match successfully only once per reset, with related flag RXf_USED in
+ * re->extflags holding state. This is used only for ?? matches, and only on
+ * OP_MATCH and OP_QR */
+#define PMf_ONCE (1<<(PMf_BASE_SHIFT+1))
-#define PMf_USED 0x0010 /* PMf_ONCE has matched successfully.
- Not used under threading. */
+/* replacement contains variables */
+#define PMf_MAYBE_CONST (1<<(PMf_BASE_SHIFT+2))
-#define PMf_CONST 0x0040 /* subst replacement is constant */
-#define PMf_KEEP 0x0080 /* keep 1st runtime pattern forever */
-#define PMf_GLOBAL 0x0100 /* pattern had a g modifier */
-#define PMf_CONTINUE 0x0200 /* don't reset pos() if //g fails */
-#define PMf_EVAL 0x0400 /* evaluating replacement as expr */
+/* PMf_ONCE has matched successfully. Not used under threading. */
+#define PMf_USED (1<<(PMf_BASE_SHIFT+3))
-/* The following flags have exact equivalents in regcomp.h with the prefix RXf_
- * which are stored in the regexp->extflags member.
- */
-#define PMf_LOCALE 0x00800 /* use locale for character types */
-#define PMf_MULTILINE 0x01000 /* assume multiple lines */
-#define PMf_SINGLELINE 0x02000 /* assume single line */
-#define PMf_FOLD 0x04000 /* case insensitivity */
-#define PMf_EXTENDED 0x08000 /* chuck embedded whitespace */
-#define PMf_KEEPCOPY 0x10000 /* copy the string when matching */
+/* subst replacement is constant */
+#define PMf_CONST (1<<(PMf_BASE_SHIFT+4))
+
+/* keep 1st runtime pattern forever */
+#define PMf_KEEP (1<<(PMf_BASE_SHIFT+5))
+
+#define PMf_GLOBAL (1<<(PMf_BASE_SHIFT+6)) /* pattern had a g modifier */
+
+/* don't reset pos() if //g fails */
+#define PMf_CONTINUE (1<<(PMf_BASE_SHIFT+7))
+
+/* evaluating replacement as expr */
+#define PMf_EVAL (1<<(PMf_BASE_SHIFT+8))
-/* mask of bits that need to be transfered to re->extflags */
-#define PMf_COMPILETIME (PMf_MULTILINE|PMf_SINGLELINE|PMf_LOCALE|PMf_FOLD|PMf_EXTENDED|PMf_KEEPCOPY)
+/* Return substituted string instead of modifying it. */
+#define PMf_NONDESTRUCT (1<<(PMf_BASE_SHIFT+9))
+
+#if PMf_BASE_SHIFT+9 > 31
+# error Too many PMf_ bits used. See above and regnodes.h for any spare in middle
+#endif
#ifdef USE_ITHREADS
#define cSVOPo_sv cSVOPx_sv(o)
#define kSVOP_sv cSVOPx_sv(kid)
-#define Nullop Null(OP*)
+#ifndef PERL_CORE
+# define Nullop ((OP*)NULL)
+#endif
/* Lowest byte-and-a-bit of PL_opargs */
#define OA_MARK 1
#define OA_FOLDCONST 2
#define OA_RETSCALAR 4
#define OA_TARGET 8
-#define OA_RETINTEGER 16
+#define OA_TARGLEX 16
#define OA_OTHERINT 32
#define OA_DANGEROUS 64
#define OA_DEFGV 128
-#define OA_TARGLEX 256
/* The next 4 bits encode op class information */
-#define OCSHIFT 9
+#define OCSHIFT 8
#define OA_CLASS_MASK (15 << OCSHIFT)
#define OA_FILESTATOP (12 << OCSHIFT)
#define OA_LOOPEXOP (13 << OCSHIFT)
-#define OASHIFT 13
+#define OASHIFT 12
/* Remaining nybbles of PL_opargs */
#define OA_SCALAR 1
#endif
/* flags used by Perl_load_module() */
-#define PERL_LOADMOD_DENY 0x1
-#define PERL_LOADMOD_NOIMPORT 0x2
-#define PERL_LOADMOD_IMPORT_OPS 0x4
+#define PERL_LOADMOD_DENY 0x1 /* no Module */
+#define PERL_LOADMOD_NOIMPORT 0x2 /* use Module () */
+#define PERL_LOADMOD_IMPORT_OPS 0x4 /* use Module (...) */
#if defined(PERL_IN_PERLY_C) || defined(PERL_IN_OP_C)
#define ref(o, type) doref(o, type, TRUE)
#endif
+/*
+=head1 Optree Manipulation Functions
+
+=for apidoc Am|OP*|LINKLIST|OP *o
+Given the root of an optree, link the tree in execution order using the
+C<op_next> pointers and return the first op executed. If this has
+already been done, it will not be redone, and C<< o->op_next >> will be
+returned. If C<< o->op_next >> is not already set, I<o> should be at
+least an C<UNOP>.
+
+=cut
+*/
+
+#define LINKLIST(o) ((o)->op_next ? (o)->op_next : op_linklist((OP*)o))
+
/* no longer used anywhere in core */
#ifndef PERL_CORE
#define cv_ckproto(cv, gv, p) \
cv_ckproto_len((cv), (gv), (p), (p) ? strlen(p) : 0)
#endif
+#ifdef PERL_CORE
+# define my(o) my_attrs((o), NULL)
+#endif
+
#ifdef USE_REENTRANT_API
#include "reentr.h"
#endif
#define FreeOp(p) PerlMemShared_free(p)
#endif
+struct block_hooks {
+ U32 bhk_flags;
+ void (*bhk_start) (pTHX_ int full);
+ void (*bhk_pre_end) (pTHX_ OP **seq);
+ void (*bhk_post_end) (pTHX_ OP **seq);
+ void (*bhk_eval) (pTHX_ OP *const saveop);
+};
+
+/*
+=head1 Compile-time scope hooks
+
+=for apidoc mx|U32|BhkFLAGS|BHK *hk
+Return the BHK's flags.
+
+=for apidoc mx|void *|BhkENTRY|BHK *hk|which
+Return an entry from the BHK structure. I<which> is a preprocessor token
+indicating which entry to return. If the appropriate flag is not set
+this will return NULL. The type of the return value depends on which
+entry you ask for.
+
+=for apidoc Amx|void|BhkENTRY_set|BHK *hk|which|void *ptr
+Set an entry in the BHK structure, and set the flags to indicate it is
+valid. I<which> is a preprocessing token indicating which entry to set.
+The type of I<ptr> depends on the entry.
+
+=for apidoc Amx|void|BhkDISABLE|BHK *hk|which
+Temporarily disable an entry in this BHK structure, by clearing the
+appropriate flag. I<which> is a preprocessor token indicating which
+entry to disable.
+
+=for apidoc Amx|void|BhkENABLE|BHK *hk|which
+Re-enable an entry in this BHK structure, by setting the appropriate
+flag. I<which> is a preprocessor token indicating which entry to enable.
+This will assert (under -DDEBUGGING) if the entry doesn't contain a valid
+pointer.
+
+=for apidoc mx|void|CALL_BLOCK_HOOKS|which|arg
+Call all the registered block hooks for type I<which>. I<which> is a
+preprocessing token; the type of I<arg> depends on I<which>.
+
+=cut
+*/
+
+#define BhkFLAGS(hk) ((hk)->bhk_flags)
+
+#define BHKf_bhk_start 0x01
+#define BHKf_bhk_pre_end 0x02
+#define BHKf_bhk_post_end 0x04
+#define BHKf_bhk_eval 0x08
+
+#define BhkENTRY(hk, which) \
+ ((BhkFLAGS(hk) & BHKf_ ## which) ? ((hk)->which) : NULL)
+
+#define BhkENABLE(hk, which) \
+ STMT_START { \
+ BhkFLAGS(hk) |= BHKf_ ## which; \
+ assert(BhkENTRY(hk, which)); \
+ } STMT_END
+
+#define BhkDISABLE(hk, which) \
+ STMT_START { \
+ BhkFLAGS(hk) &= ~(BHKf_ ## which); \
+ } STMT_END
+
+#define BhkENTRY_set(hk, which, ptr) \
+ STMT_START { \
+ (hk)->which = ptr; \
+ BhkENABLE(hk, which); \
+ } STMT_END
+
+#define CALL_BLOCK_HOOKS(which, arg) \
+ STMT_START { \
+ if (PL_blockhooks) { \
+ I32 i; \
+ for (i = av_len(PL_blockhooks); i >= 0; i--) { \
+ SV *sv = AvARRAY(PL_blockhooks)[i]; \
+ BHK *hk; \
+ \
+ assert(SvIOK(sv)); \
+ if (SvUOK(sv)) \
+ hk = INT2PTR(BHK *, SvUVX(sv)); \
+ else \
+ hk = INT2PTR(BHK *, SvIVX(sv)); \
+ \
+ if (BhkENTRY(hk, which)) \
+ BhkENTRY(hk, which)(aTHX_ arg); \
+ } \
+ } \
+ } STMT_END
+
+/* flags for rv2cv_op_cv */
+
+#define RV2CVOPCV_MARK_EARLY 0x00000001
+#define RV2CVOPCV_RETURN_NAME_GV 0x00000002
+
+/*
+=head1 Custom Operators
+
+=for apidoc Am|U32|XopFLAGS|XOP *xop
+Return the XOP's flags.
+
+=for apidoc Am||XopENTRY|XOP *xop|which
+Return a member of the XOP structure. I<which> is a cpp token indicating
+which entry to return. If the member is not set this will return a
+default value. The return type depends on I<which>.
+
+=for apidoc Am|void|XopENTRY_set|XOP *xop|which|value
+Set a member of the XOP structure. I<which> is a cpp token indicating
+which entry to set. See L<perlguts/"Custom Operators"> for details about
+the available members and how they are used.
+
+=for apidoc Am|void|XopDISABLE|XOP *xop|which
+Temporarily disable a member of the XOP, by clearing the appropriate flag.
+
+=for apidoc Am|void|XopENABLE|XOP *xop|which
+Reenable a member of the XOP which has been disabled.
+
+=cut
+*/
+
+struct custom_op {
+ U32 xop_flags;
+ const char *xop_name;
+ const char *xop_desc;
+ U32 xop_class;
+ void (*xop_peep)(pTHX_ OP *o, OP *oldop);
+};
+
+#define XopFLAGS(xop) ((xop)->xop_flags)
+
+#define XOPf_xop_name 0x01
+#define XOPf_xop_desc 0x02
+#define XOPf_xop_class 0x04
+#define XOPf_xop_peep 0x08
+
+#define XOPd_xop_name PL_op_name[OP_CUSTOM]
+#define XOPd_xop_desc PL_op_desc[OP_CUSTOM]
+#define XOPd_xop_class OA_BASEOP
+#define XOPd_xop_peep ((Perl_cpeep_t)0)
+
+#define XopENTRY_set(xop, which, to) \
+ STMT_START { \
+ (xop)->which = (to); \
+ (xop)->xop_flags |= XOPf_ ## which; \
+ } STMT_END
+
+#define XopENTRY(xop, which) \
+ ((XopFLAGS(xop) & XOPf_ ## which) ? (xop)->which : XOPd_ ## which)
+
+#define XopDISABLE(xop, which) ((xop)->xop_flags &= ~XOPf_ ## which)
+#define XopENABLE(xop, which) \
+ STMT_START { \
+ (xop)->xop_flags |= XOPf_ ## which; \
+ assert(XopENTRY(xop, which)); \
+ } STMT_END
+
+/*
+=head1 Optree Manipulation Functions
+
+=for apidoc Am|const char *|OP_NAME|OP *o
+Return the name of the provided OP. For core ops this looks up the name
+from the op_type; for custom ops from the op_ppaddr.
+
+=for apidoc Am|const char *|OP_DESC|OP *o
+Return a short description of the provided OP.
+
+=for apidoc Am|U32|OP_CLASS|OP *o
+Return the class of the provided OP: that is, which of the *OP
+structures it uses. For core ops this currently gets the information out
+of PL_opargs, which does not always accurately reflect the type used.
+For custom ops the type is returned from the registration, and it is up
+to the registree to ensure it is accurate. The value returned will be
+one of the OA_* constants from op.h.
+
+=cut
+*/
+
+#define OP_NAME(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_name) \
+ : PL_op_name[(o)->op_type])
+#define OP_DESC(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_desc) \
+ : PL_op_desc[(o)->op_type])
+#define OP_CLASS(o) ((o)->op_type == OP_CUSTOM \
+ ? XopENTRY(Perl_custom_op_xop(aTHX_ o), xop_class) \
+ : (PL_opargs[(o)->op_type] & OA_CLASS_MASK))
+
+#define newSUB(f, o, p, b) Perl_newATTRSUB(aTHX_ (f), (o), (p), NULL, (b))
+
#ifdef PERL_MAD
# define MAD_NULL 1
# define MAD_PV 2
#endif
/*
- * Values that can be hold by mad_key :
+ * Values that can be held by mad_key :
* ^ unfilled head spot
* , literal ,
* ; literal ; (blank if implicit ; at end of block)
* g op was forced to be a word
* i if/unless modifier
* I if/elsif/unless statement
+ * k local declarator
* K retired kid op
* l last index of array ($#foo)
* L label
* m modifier on regex
- * M my assignment slurped into some other operator's target
* n sub or format name
* o current operator/declarator name
* o else/continue
* Q optimized qw//
* r expression producing R
* R tr/E/R/ s/E/R/
- * R assign slurped by split
* s sub signature
* S use import stub (no import)
* S retired sort block
https://perl5.git.perl.org / perl5.git / blobdiff