esac
pldlflags="$cccdlflags"
+ static_target='static_pic'
case "${osname}${osvers}" in
next4*)
ld=libtool
ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
;;
esac
+
+ case "$ldlibpth" in
+ # Protect any spaces
+ *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
+ esac
+
+ case "$osname" in
+ linux)
+ # If there is a pre-existing $libperl from a previous
+ # installation, Linux needs to use LD_PRELOAD to
+ # override the LD_LIBRARY_PATH setting. See the
+ # INSTALL file, under "Building a shared perl library".
+ # If there is no pre-existing $libperl, we don't need
+ # to do anything further.
+ if test -f $archlib/CORE/$libperl; then
+ rm -f preload
+ cat <<'EOT' > preload
+#! /bin/sh
+lib=$1
+shift
+test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
+exec "$@"
+EOT
+ chmod 755 preload
+ ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
+ fi
+ ;;
+ os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
+ ;;
+ esac
+
;;
+
*) pldlflags=''
+ static_target='static'
;;
esac
LLIBPERL= $linklibperl
SHRPENV = $shrpenv
+# Static targets are ordinarily built without CCCDLFLAGS. However,
+# if building a shared libperl.so that might later be linked into
+# another application, then it might be appropriate to also build static
+# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
+# for GNU cc). This is handled by ext/util/make_ext.
+STATIC = $static_target
+
# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth
libs = $perllibs $cryptlib
-public = perl $suidperl utilities translators
+public = perl\$(EXE_EXT) $suidperl utilities translators
shellflags = $shellflags
# do it for you.
$make_set_make
+# Mention $gmake here so it gets probed for by Configure.
+
# These variables may need to be manually set for non-Unix systems.
AR = $full_ar
EXE_EXT = $_exe
# $installusrbinperl
# $versiononly
+case "${osname}:${osvers}" in
+darwin:*)
+$spitshell >>Makefile <<EOF
+
+# Your locales are broken (osname $osname, osvers $osvers)
+# and to avoid the numerous
+# perl: warning: Setting locale failed.
+# warnings during the build process we reset the locale variables.
+
+LC_ALL=C
+LANG=C
+LANGUAGE=C
+EOF
+ ;;
+esac
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
-CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $@`
+CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
-CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $<`
+CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm
addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
-h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
+h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
+h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
+c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
+c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
+obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-# Once perl has been Configure'd and built ok you build different
-# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
-# make clean; make LIBPERL=libperl<type>.a
-# where <type> is some combination of 'd' and(or) 'e' or 'm'.
-# See cflags to understand how this works.
-#
-# This mechanism is getting clunky and might not even work any more.
-# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
-#
-
lintflags = -hbvxac
.c$(OBJ_EXT):
.c.s:
$(CCCMDSRC) -S $*.c
-.PHONY: all compile translators utilities
-
-all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
- @echo " Everything is up to date. 'make test' to run test suite."
+ @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
+
+.PHONY: all compile translators utilities
compile: all
echo "testing compilation" > testcompile;
cd x2p; $(MAKE) compile;
cd pod; $(MAKE) compile;
-translators: miniperl lib/Config.pm FORCE
+translators: miniperl$(EXE_EXT) lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl lib/Config.pm $(plextract) lib/lib.pm FORCE
+utilities: miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
sh mv-if-diff writemain.tmp perlmain.c
+!NO!SUBS!
+case "$osname" in
+cygwin)
+ ;; # Let cygwin/Makefile.SHs do its work.
+*)
+ $spitshell >>Makefile <<'!NO!SUBS!'
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
+!NO!SUBS!
+ ;;
+esac
+$spitshell >>Makefile <<'!NO!SUBS!'
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl.exp
!NO!SUBS!
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl5.def
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
- $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
+ $(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj) $(libs)
!NO!SUBS!
case "$osname" in
aix)
!NO!SUBS!
case "${osname}${osvers}" in
- next4*)
+ aix*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
- $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+ $(CC) -o miniperl $(CLDFLAGS) \
+ `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
- aix*)
+ beos*|next4*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
- $(CC) -o miniperl $(CLDFLAGS) \
- `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+ $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
+ darwin*)
+ case "$osvers" in
+ [1-6].*) ;;
+ *) case "$ldflags" in
+ *"-flat_namespace"*) ;;
+ *) # to allow opmini.o to override stuff in libperl.dylib
+ $spitshell >>Makefile <<!NO!SUBS!
+NAMESPACEFLAGS = -force_flat_namespace
+!NO!SUBS!
+ ;;
+ esac
+ ;;
+ esac
+ $spitshell >>Makefile <<'!NO!SUBS!'
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+ -@rm -f miniperl.xok
+ $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \
+ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
+ $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+!NO!SUBS!
+ ;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
-miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-@rm -f miniperl.xok
$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
$spitshell >>Makefile <<'!NO!SUBS!'
-perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
-@rm -f miniperl.xok
$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Purify/Quantify Perls.
-pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
-purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
-quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+# Valgrind perl (currently Linux only)
+
+perl.valgrind.config: config.sh
+ @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
+ @$(MAKE) perl.config.dashg
+ @echo "Checking usemymalloc='n' in config.sh..."
+ @grep "^usemymalloc=" config.sh
+ @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
+ @echo "And of course you have to have valgrind..."
+ valgrind --help >/dev/null || exit 1
+
# Third Degree Perl (Tru64 only)
perl.config.dashg:
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
perl.third: /usr/bin/atom perl.third.config perl
- atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
+ atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
@echo "Now you may run perl.third and then study perl.3log."
# Pixie Perls (Tru64 and IRIX only)
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
-suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
+suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
+# We need to autosplit in two steps because VOS can't handle so many args
#
.PHONY: preplibrary
-preplibrary: miniperl lib/Config.pm lib/lib.pm
+preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
- autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
+ autosplit_lib_modules(@ARGV)' lib/*.pm
+ $(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
+ autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl configpm
- $(LDLIBPTH) ./miniperl configpm configpm.tmp
+lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+ $(LDLIBPTH) ./miniperl -Ilib configpm configpm.tmp
sh mv-if-diff configpm.tmp $@
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
sh mv-if-diff minimod.tmp $@
-touch lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
-$(plextract): miniperl lib/Config.pm
+$(plextract): miniperl$(EXE_EXT) lib/Config.pm x2p/s2p
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib $@.PL
-lib/lib.pm: miniperl lib/Config.pm
+x2p/s2p: miniperl$(EXE_EXT) lib/Config.pm x2p/s2p.PL
+ cd x2p; $(LDLIBPTH) $(MAKE) s2p
+
+lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL
-extra.pods: miniperl
+extra.pods: miniperl$(EXE_EXT)
-@test -f extra.pods && rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-extras.make: perl
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+extras.make: perl$(EXE_EXT)
+ -@test -s extras.lst && PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
-extras.test: perl
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+extras.test: perl$(EXE_EXT)
+ -@test -s extras.lst && PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
-extras.install: perl
- -@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+extras.install: perl$(EXE_EXT)
+ -@test -s extras.lst && PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
- no-install install.perl install.man installman install.html installhtml
+ no-install install.perl install.man install.html
+
+META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
+ $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta
install-strip:
$(MAKE) STRIPFLAGS=-s install
cd ../pod; $(MAKE) compile; \
else :; \
fi
- $(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
+ $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
$(MAKE) extras.install
install.man: all installman
- $(LDLIBPTH) ./perl installman $(INSTALLFLAGS)
+ $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
- perl -i perlyline.pl perly.c
+ perl -i.old perlyline.pl perly.c
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
CHMOD_W = chmod +w
# The following files are generated automatically
-# keywords.pl: keywords.h
-# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
-# [* embed.pl needs pp.sym generated by opcode.pl! *]
-# embed.pl: proto.h embed.h embedvar.h global.sym objXSUB.h
-# perlapi.h perlapi.c pod/perlintern.pod
-# pod/perlapi.pod
+# autodoc.pl: pod/perlapi.pod pod/perlintern.pod
# bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c
# ext/B/B/Asmdata.pm
+# embed.pl: proto.h embed.h embedvar.h global.sym
+# perlapi.h perlapi.c
+# [* embed.pl needs pp.sym generated by opcode.pl! *]
+# keywords.pl: keywords.h
+# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
-# To force them to be regenerated, type
-# make regen_headers
+# To force them to be regenerated, run
+# perl regen.pl
+# with your existing copy of perl
+# (make regen_headers is kept for backwards compatibility)
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
- objXSUB.h perlapi.h perlapi.c ext/ByteLoader/byterun.h \
+ perlapi.h perlapi.c ext/ByteLoader/byterun.h \
ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \
warnings.h lib/warnings.pm
.PHONY: regen_headers regen_pods regen_all
-regen_headers: FORCE
- -$(CHMOD_W) $(AUTOGEN_FILES)
- -perl keywords.pl
- -perl opcode.pl
- -perl embed.pl
- -perl bytecode.pl
- -perl regcomp.pl
- -perl warnings.pl
+regen regen_headers: FORCE
+ -perl regen.pl
regen_pods: FORCE
- -cd pod; $(LDLIBPTH) make regen_pods
+ -cd pod; $(LDLIBPTH) $(MAKE) regen_pods
+
+regen_all: $(PERLYVMS) regen regen_pods
+
+.PHONY: manisort manicheck
-regen_all: $(PERLYVMS) regen_headers regen_pods
+manisort: FORCE
+ LC_ALL=C sort -fc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
+ LC_ALL=C sort -fo MANIFEST MANIFEST)
+
+manicheck: FORCE
+ perl Porting/manicheck
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
#
# DynaLoader may be needed for extensions that use Makefile.PL.
-$(DYNALOADER): miniperl preplibrary FORCE
- @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
+ @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
-d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
+d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
-s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
- @$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
+ @$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
-n_dummy $(nonxs_ext): miniperl preplibrary $(DYNALOADER) FORCE
+n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
clean: _tidy _mopup
realclean: _realcleaner _mopup
- @echo "Note that make realclean does not delete config.sh or Policy.sh"
+ @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
_clobber:
-@rm -f Cross/run-* Cross/to-* Cross/from-*
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
+ -rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-rm -f perl.exp ext.libs extra.pods opmini.o
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
- rm -f perl suidperl miniperl $(LIBPERL) libperl.* microperl
+ -rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
+ -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
+ -rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
# Do not 'make _tidy' directly.
_tidy:
$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done
+# Some systems do not support "?", so keep these files separate.
_cleaner2:
- rm -f core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/forktmp* t/tmp* t/c t/perl t/rantests .?*.c so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
+ rm -f core *perl.core t/core t/*perl.core
+ rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
+ rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
- rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
- rm -f $(private)
+ rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
+ rm -f $(private) lib/Config.pod
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
+ rm -f preload
rm -f testcompile compilelog
- -rmdir lib/B lib/Data lib/Digest lib/Encode lib/IO/Socket lib/IO lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys lib/Thread lib/XS
+ -rmdir lib/B lib/Data lib/Digest
+ rm -rf lib/Encode
+ -rmdir lib/Filter/Util lib/IO/Socket lib/IO
+ -rmdir lib/List lib/MIME lib/Scalar lib/Sys
+ -rmdir lib/threads lib/XS
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
test_tty test-tty _test_tty test_notty test-notty _test_notty \
- utest ucheck test.utf8 check.utf8 \
+ utest ucheck test.utf8 check.utf8 test.torture torturetest \
test.third check.third utest.third ucheck.third test_notty.third \
- test.deparse test_notty.deparse \
- minitest
+ test.deparse test_notty.deparse test_harness test_harness_notty \
+ test.bytecompile minitest coretest
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
test_prep_pre: preplibrary utilities $(nonxs_ext)
-test_prep: test_prep_pre miniperl perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
+test_prep: test_prep_pre miniperl$(EXE_EXT) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
PERL=./perl $(MAKE) _test_prep
_test_tty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
+ cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
_test_notty:
- cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) $(TESTFILE) $(TEST_ARGS)
+ cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
utest ucheck test.utf8 check.utf8: test_prep
PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
+coretest: test_prep
+ PERL=./perl TEST_ARGS=-core $(MAKE) _test
+
test-prep: test_prep
test-tty: test_tty
test-notty: test_notty
+# Torture testing
+
+test.torture torturetest: test_prep
+ PERL=./perl TEST_ARGS=-torture $(MAKE) _test
+
+# Targets for valgrind testing:
+
+test_prep.valgrind: test_prep perl.valgrind
+ PERL=./perl $(MAKE) _test_prep
+
+test.valgrind check.valgrind: test_prep perl.valgrind.config
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 $(MAKE) _test
+
+utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
+
+test_notty.valgrind: test_prep.valgrind perl.valgrind
+ PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
+
# Targets for Third Degree testing.
-test_prep.third: test_prep perl.third perl.third$(EXE_EXT)
+test_prep.third: test_prep perl.third
PERL=./perl.third $(MAKE) _test_prep
test.third check.third: test_prep.third perl.third
test_notty.third: test_prep.third perl.third
PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
+# Targets for Bytecode/ByteLoader testing.
+
+test.bytecompile: test_prep
+ PERL=./perl TEST_ARGS=-bytecompile $(MAKE) _test
+
# Targets for Deparse testing.
test.deparse: test_prep
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: miniperl lib/re.pm
+minitest: miniperl$(EXE_EXT) lib/re.pm
+ -@test -f lib/lib.pm && test -f lib/Config.pm || \
+ $(MAKE) lib/Config.pm lib/lib.pm
+ @echo " "
@echo "You may see some irrelevant test failures if you have been unable"
- @echo "to build lib/Config.pm."
+ @echo "to build lib/Config.pm or lib/lib.pm."
+ @echo " "
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t </dev/tty
+ && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
# Test via harness
test_harness: test_prep
PERL=./perl $(MAKE) TESTFILE=harness _test
+test_harness_notty: test_prep
+ PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
+
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# Now do any special processing required before building.
case "$ebcdic" in
-$define)
+define)
xxx=''
- echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4
+ echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
case "$osname" in
os390|posix-bc)
rm -f y.tab.c y.tab.h
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
xxx="$xxx perly.c"
fi
+ case "$osname:$usethreads" in
+ os390:define)
+ sed -e 's@^extern int yychar, yyerrflag;@/* extern int yychar, yyerrflag; */@' perly.c > perly.tmp && mv perly.tmp perly.c
+ ;;
+ esac
if cmp -s y.tab.h perly.h; then
rm -f y.tab.h
else
https://perl5.git.perl.org / perl5.git / blobdiff