#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 thro 5.0
+# Visual C++ 2.0 thro 6.0
# Borland C++ 5.02
-# Mingw32 with gcc-2.8.1 or egcs-1.0.2 **experimental**
+# Mingw32 with gcc-2.95.2 or better **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl.dll). Also makes individual DLLs for the XS extensions.
+# (perl57.dll). Also makes individual DLLs for the XS extensions.
#
##
##
#
-# Set these to wherever you want "nmake install" to put your
+# Set these to wherever you want "dmake install" to put your
# newly built perl.
#
INST_DRV *= c:
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER *= \5.00559
+INST_VER *= \5.7.0
#
# Comment this out if you DON'T want your perl installation to have
INST_ARCH *= \$(ARCHNAME)
#
-# XXX WARNING! This option currently undergoing changes. May be broken.
+# uncomment to enable multiple interpreters. This is need for fork()
+# emulation.
#
-# uncomment to enable threads-capabilities
+USE_MULTI *= define
+
+#
+# Beginnings of interpreter cloning/threads; still very incomplete.
+# This should be enabled to get the fork() emulation. This needs
+# USE_MULTI as well.
+#
+USE_ITHREADS *= define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl. This needs USE_MULTI above. This is also needed to
+# get fork().
#
-#USE_THREADS *= define
+USE_IMP_SYS *= define
#
-# XXX WARNING! This option currently undergoing changes. May be broken.
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_ITHREADS instead).
#
-# uncomment to enable multiple interpreters
+# uncomment to enable threads-capabilities. This is incompatible with
+# USE_ITHREADS, and is only here for people who may have come to rely
+# on the experimental Thread support that was in 5.005.
#
-#USE_MULTI *= define
+#USE_5005THREADS *= define
#
-# XXX WARNING! This option currently undergoing changes. May be broken.
+# WARNING! This option is deprecated and will eventually go away (enable
+# USE_MULTI instead).
#
-# uncomment next line if you want to use the perl object
-# Currently, this cannot be enabled if you ask for threads above, or
-# if you are using GCC or EGCS.
+# uncomment next line if you want to use the PERL_OBJECT build option.
+# DO NOT ENABLE unless you have legacy code that relies on the C++
+# CPerlObj class that was available in 5.005. This cannot be enabled
+# if you ask for USE_5005THREADS above.
#
#USE_OBJECT *= define
#
# uncomment exactly one of the following
-#
+#
# Visual C++ 2.x
#CCTYPE *= MSVC20
# Visual C++ > 2.x and < 6.x
# Visual C++ >= 6.x
#CCTYPE *= MSVC60
# Borland 5.02 or later
-CCTYPE *= BORLAND
-# mingw32/egcs or mingw32/gcc
-#CCTYPE *= GCC
+#CCTYPE *= BORLAND
+# mingw32+gcc-2.95.2 or better
+CCTYPE *= GCC
+
+#
+# uncomment this if you are compiling under Windows 95/98 and command.com
+# (not needed if you're running under 4DOS/NT 6.01 or later)
+#IS_WIN95 *= define
#
# uncomment next line if you want debug version of perl (big,slow)
# If not enabled, we automatically try to use maximum optimization
# with all compilers that are known to have a working optimizer.
#
-#CFG *= Debug
+CFG *= Debug
#
# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# Highly recommended. It has patches that fix known bugs in MSVCRT.DLL.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
# This currently requires VC 5.0 with Service Pack 3 or later.
# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/
# and follow the directions in the package to install.
#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
#USE_PERLCRT *= define
#
# WARNING: Turning this on/off WILL break binary compatibility with extensions
# you may have compiled with/without it. Be prepared to recompile all
# extensions if you change the default. Currently, this cannot be enabled
-# if you ask for USE_OBJECT above.
+# if you ask for USE_IMP_SYS above.
#
#PERL_MALLOC *= define
# so you may have to set CCHOME explicitly (spaces in the path name should
# not be quoted)
#
-CCHOME *= d:\bc5
+#CCHOME *= c:\bc5
#CCHOME *= $(MSVCDIR)
-#CCHOME *= D:\packages\mingw32
+CCHOME *= c:\gcc-2.95.2
CCINCDIR *= $(CCHOME)\include
CCLIBDIR *= $(CCHOME)\lib
#
-# additional compiler flags can be specified here.
+# Additional compiler flags can be specified here.
#
-# Adding -DPERL_POLLUTE enables support for old symbols, at the expense of
-# extreme pollution. You most probably want this if you're compiling modules
-# from CPAN, or other such serious uses of this experimental perl release.
-# We don't enable this by default because we want the modules to get fixed
-# instead of clinging to shortcuts like this one.
+
+#
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution. You most
+# probably just want to build modules that won't compile with
+# perl Makefile.PL POLLUTE=1
+# instead of enabling this. Please report such modules to the respective
+# authors.
#
#BUILDOPT += -DPERL_POLLUTE
#
+# This should normally be disabled. Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT += -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled. Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
+
+#
# specify semicolon-separated list of extra directories that modules will
# look for libraries (spaces in path names need not be quoted)
#
.IF "$(USE_OBJECT)" == "define"
PERL_MALLOC != undef
-USE_THREADS != undef
+USE_5005THREADS != undef
USE_MULTI != undef
+USE_IMP_SYS != define
.ENDIF
PERL_MALLOC *= undef
-USE_THREADS *= undef
+USE_5005THREADS *= undef
+
+.IF "$(USE_5005THREADS)" == "define"
+USE_ITHREADS != undef
+.ENDIF
+
+.IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC != undef
+.ENDIF
+
USE_MULTI *= undef
USE_OBJECT *= undef
+USE_ITHREADS *= undef
+USE_IMP_SYS *= undef
+USE_PERLCRT *= undef
-.IF "$(USE_MULTI)$(USE_THREADS)$(USE_OBJECT)" != "undefundefundef"
+.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"
+USE_MULTI != define
+.ENDIF
+
+.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"
+USE_MULTI != define
+USE_5005THREADS != undef
+.ENDIF
+
+.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
+.IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT += -DPERL_IMPLICIT_SYS
+.ENDIF
.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE
.IF "$(USE_OBJECT)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object
-.ELIF "$(USE_THREADS)" == "define"
+.ELIF "$(USE_5005THREADS)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread
.ELIF "$(USE_MULTI)" == "define"
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF
+.IF "$(USE_ITHREADS)" == "define"
+ARCHNAME !:= $(ARCHNAME)-thread
+.ENDIF
+
# Visual Studio 98 specific
.IF "$(CCTYPE)" == "MSVC60"
# VC 6.0 can load the socket dll on demand. Makes the test suite
# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll delayimp.lib
+DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
# VC 6.0 seems capable of compiling perl correctly with optimizations
# enabled. Anything earlier fails tests.
CFG *= Optimize
.ENDIF
+ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
+INST_COREDIR = $(INST_ARCHLIB)\CORE
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_POD)\html
#
# Programs to compile, build .lib files and link
LINK32 = tlink32
LIB32 = tlib /P128
IMPLIB = implib -c
+RSC = rc
#
# Options
#
-RUNTIME = -D_RTLDLL
INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC) odbc32.lib odbccp32.lib
.IF "$(CFG)" == "Debug"
-OPTIMIZE = -v $(RUNTIME) -DDEBUGGING
+OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
LINK_DBG = -v
.ELSE
-OPTIMIZE = -O2 $(RUNTIME)
-LINK_DBG =
+OPTIMIZE = -O2 -D_RTLDLL
+LINK_DBG =
.ENDIF
CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
-LIBOUT_FLAG =
+LIBOUT_FLAG =
.ELIF "$(CCTYPE)" == "GCC"
LINK32 = gcc
LIB32 = ar rc
IMPLIB = dlltool
+RSC = rc
+i = .i
o = .o
a = .a
#
# Options
#
-RUNTIME =
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+
+INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
DEFINES = -DWIN32 $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -xc++
-LIBC = -lcrtdll
-LIBFILES = $(CRYPT_LIB) -ladvapi32 -luser32 -lnetapi32 -lwsock32 \
- -lmingw32 -lgcc -lmoldname $(LIBC) -lkernel32
+LIBC = -lmsvcrt
+
+# same libs as MSVC
+LIBFILES = $(CRYPT_LIB) $(LIBC) \
+ -lmoldname -lkernel32 -luser32 -lgdi32 \
+ -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
+ -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
+ -lwinmm -lversion -lodbc32
.IF "$(CFG)" == "Debug"
-OPTIMIZE = -g -O2 $(RUNTIME) -DDEBUGGING
+OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -g
.ELSE
-OPTIMIZE = -g -O2 $(RUNTIME)
-LINK_DBG =
+OPTIMIZE = -g -O2
+LINK_DBG = -g
.ENDIF
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -o
-LIBOUT_FLAG =
+LIBOUT_FLAG =
+
+# NOTE: we assume that GCC uses MSVCRT.DLL
+BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
.ELSE
-CC = cl.exe
-LINK32 = link.exe
+CC = cl
+LINK32 = link
LIB32 = $(LINK32) -lib
+RSC = rc
#
# Options
#
-RUNTIME = -MD
INCLUDES = -I$(COREDIR) -I.\include -I. -I..
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -TP -GX
-.IF "$(USE_PERLCRT)" == ""
-.IF "$(CFG)" == "Debug"
-PERLCRTLIBC = msvcrtd.lib
-.ELSE
-PERLCRTLIBC = msvcrt.lib
-.ENDIF
-.ELSE
-.IF "$(CFG)" == "Debug"
-PERLCRTLIBC = PerlCRTD.lib
+.IF "$(USE_PERLCRT)" != "define"
+LIBC = msvcrt.lib
.ELSE
-PERLCRTLIBC = PerlCRT.lib
-.ENDIF
+LIBC = PerlCRT.lib
.ENDIF
-.IF "$(RUNTIME)" == "-MD"
-LIBC = $(PERLCRTLIBC)
-.ELSE
-LIBC = libcmt.lib
-.ENDIF
+PERLEXE_RES =
+PERLDLL_RES =
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
-OPTIMIZE = -Od $(RUNTIME) -Z7 -D_DEBUG -DDEBUGGING
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
.ELSE
-OPTIMIZE = -Od $(RUNTIME)d -Zi -D_DEBUG -DDEBUGGING
+OPTIMIZE = -Od -MD -Zi -DDEBUGGING
.ENDIF
LINK_DBG = -debug -pdb:none
.ELSE
.IF "$(CFG)" == "Optimize"
# -O1 yields smaller code, which turns out to be faster than -O2
-#OPTIMIZE = -O2 $(RUNTIME) -DNDEBUG
-OPTIMIZE = -O1 $(RUNTIME) -DNDEBUG
+#OPTIMIZE = -O2 -MD -DNDEBUG
+OPTIMIZE = -O1 -MD -DNDEBUG
.ELSE
-OPTIMIZE = -Od $(RUNTIME) -DNDEBUG
+OPTIMIZE = -Od -MD -DNDEBUG
.ENDIF
LINK_DBG = -release
.ENDIF
-LIBBASEFILES = $(DELAYLOAD) $(CRYPT_LIB) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib \
- winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib \
- oleaut32.lib netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+LIBBASEFILES = $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
version.lib odbc32.lib odbccp32.lib
# we add LIBC here, since we may be using PerlCRT.dll
CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) -machine:$(PROCESSOR_ARCHITECTURE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
+ -libpath:"$(INST_COREDIR)" \
+ -machine:$(PROCESSOR_ARCHITECTURE)
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
+.IF "$(USE_PERLCRT)" != "define"
+BUILDOPT += -DPERL_MSVCRT_READFIX
+.ENDIF
+
.ENDIF
.IF "$(USE_OBJECT)" == "define"
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+# used to allow local linking flags that are not propogated into Config.pm,
+# currently unused
+# -- BKS, 12-12-1999
+PRIV_LINK_FLAGS *=
+BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
+
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
#
# Rules
-#
+#
-.SUFFIXES : .c $(o) .dll $(a) .exe
+.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
.c$(o):
$(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+.c.i:
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
+
.y.c:
$(NOOP)
$(o).dll:
.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(LINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
$(IMPLIB) $(*B).lib $@
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -o $@ $(LINK_FLAGS) $< $(LIBFILES)
- $(IMPLIB) -def $(*B).def $(*B).a $@
+ $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
+ $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
.ELSE
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
- -out:$@ $(LINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+ -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
.ENDIF
-#
-INST_BIN = $(INST_TOP)$(INST_VER)\bin$(INST_ARCH)
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
-INST_LIB = $(INST_TOP)$(INST_VER)\lib
-INST_POD = $(INST_LIB)\pod
-INST_HTML = $(INST_POD)\html
-LIBDIR = ..\lib
-EXTDIR = ..\ext
-PODDIR = ..\pod
-EXTUTILSDIR = $(LIBDIR)\extutils
+.rc.res:
+ $(RSC) -i.. $<
#
# various targets
MINIPERL = ..\miniperl.exe
MINIDIR = .\mini
PERLEXE = ..\perl.exe
+WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
CONFIGPM = ..\lib\Config.pm
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
+
PL2BAT = bin\pl2bat.pl
GLOBBAT = bin\perlglob.bat
..\utils\c2ph \
..\utils\h2xs \
..\utils\perldoc \
- ..\utils\pstruct \
..\utils\perlcc \
..\pod\checkpods \
..\pod\pod2html \
..\pod\podselect \
..\x2p\find2perl \
..\x2p\s2p \
+ bin\exetype.pl \
bin\runperl.pl \
bin\pl2bat.pl \
bin\perlglob.pl \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-.IF "$(USE_OBJECT)" == "define"
-PERLIMPLIB = ..\libperlcore$(a)
-.ELSE
-PERLIMPLIB = ..\libperl$(a)
-.ENDIF
+PERLIMPLIB = ..\libperl57$(a)
.ELSE
CFGSH_TMPL = config.vc
CFGH_TMPL = config_H.vc
-.IF "$(USE_PERLCRT)" == ""
-PERL95EXE = ..\perl95.exe
-.ENDIF
.ENDIF
-.IF "$(USE_OBJECT)" == "define"
-PERLIMPLIB *= ..\perl56$(a)
-PERLDLL = ..\perl56.dll
-.ELSE
-PERLIMPLIB *= ..\perl$(a)
-PERLDLL = ..\perl.dll
-.ENDIF
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+# XXX so why did we change it from perl56 to perl57?
+PERLIMPLIB *= ..\perl57$(a)
+PERLDLL = ..\perl57.dll
XCOPY = xcopy /f /r /i /d
RCOPY = xcopy /f /r /i /e /d
..\toke.c \
..\universal.c \
..\utf8.c \
- ..\util.c
+ ..\util.c \
+ ..\xsutils.c
EXTRACORE_SRC += perllib.c
WIN32_SRC = \
.\win32.c \
- .\win32sck.c
-
-.IF "$(USE_THREADS)" == "define"
-WIN32_SRC += .\win32thread.c
-.ENDIF
+ .\win32sck.c \
+ .\win32thread.c
.IF "$(CRYPT_SRC)" != ""
WIN32_SRC += .\$(CRYPT_SRC)
.ENDIF
-PERL95_SRC = \
- perl95.c \
- win32mt.c \
- win32sckmt.c
-
-.IF "$(CRYPT_SRC)" != ""
-PERL95_SRC += .\$(CRYPT_SRC)
-.ENDIF
-
DLL_SRC = $(DYNALOADER).c
X2P_SRC = \
..\unixish.h \
..\utf8.h \
..\util.h \
- ..\warning.h \
+ ..\warnings.h \
..\XSUB.h \
..\EXTERN.h \
..\perlvars.h \
MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-PERL95_OBJ = $(PERL95_SRC:db:+$(o))
DLL_OBJ = $(DLL_SRC:db:+$(o))
X2P_OBJ = $(X2P_SRC:db:+$(o))
.ENDIF
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
+ Sys/Hostname Storable Filter/Util/Call Encode
STATIC_EXT = DynaLoader
NONXS_EXT = Errno
PEEK = $(EXTDIR)\Devel\Peek\Peek
BYTELOADER = $(EXTDIR)\ByteLoader\ByteLoader
DPROF = $(EXTDIR)\Devel\DProf\DProf
+GLOB = $(EXTDIR)\File\Glob\Glob
+HOSTNAME = $(EXTDIR)\Sys\Hostname\Hostname
+STORABLE = $(EXTDIR)\Storable\Storable
+FILTER = $(EXTDIR)\Filter\Util\Call\Call
+ENCODE = $(EXTDIR)\Encode\Encode
SOCKET_DLL = $(AUTODIR)\Socket\Socket.dll
FCNTL_DLL = $(AUTODIR)\Fcntl\Fcntl.dll
RE_DLL = $(AUTODIR)\re\re.dll
BYTELOADER_DLL = $(AUTODIR)\ByteLoader\ByteLoader.dll
DPROF_DLL = $(AUTODIR)\Devel\DProf\DProf.dll
+GLOB_DLL = $(AUTODIR)\File\Glob\Glob.dll
+HOSTNAME_DLL = $(AUTODIR)\Sys\Hostname\Hostname.dll
+STORABLE_DLL = $(AUTODIR)\Storable\Storable.dll
+FILTER_DLL = $(AUTODIR)\Filter\Util\Call\Call.dll
+ENCODE_DLL = $(AUTODIR)\Encode\Encode.dll
ERRNO_PM = $(LIBDIR)\Errno.pm
$(PEEK).c \
$(B).c \
$(BYTELOADER).c \
- $(DPROF).c
+ $(DPROF).c \
+ $(GLOB).c \
+ $(HOSTNAME).c \
+ $(STORABLE).c \
+ $(FILTER).c \
+ $(ENCODE).c
EXTENSION_DLL = \
$(SOCKET_DLL) \
$(RE_DLL) \
$(THREAD_DLL) \
$(BYTELOADER_DLL) \
- $(DPROF_DLL)
+ $(DPROF_DLL) \
+ $(GLOB_DLL) \
+ $(HOSTNAME_DLL) \
+ $(STORABLE_DLL) \
+ $(FILTER_DLL) \
+ $(ENCODE_DLL)
EXTENSION_PM = \
$(ERRNO_PM)
POD2LATEX = $(PODDIR)\pod2latex
POD2TEXT = $(PODDIR)\pod2text
+# vars must be separated by "\t+~\t+", since we're using the tempfile
+# version of config_sh.pl (we were overflowing someone's buffer by
+# trying to fit them all on the command line)
+# -- BKS 10-17-1999
CFG_VARS = \
- "INST_DRV=$(INST_DRV)" \
- "INST_TOP=$(INST_TOP)" \
- "INST_VER=$(INST_VER)" \
- "INST_ARCH=$(INST_ARCH)" \
- "archname=$(ARCHNAME)" \
- "cc=$(CC)" \
- "ccflags=$(OPTIMIZE:s/"/\"/) $(DEFINES) $(BUILDOPT)" \
- "cf_email=$(EMAIL)" \
- "d_crypt=$(D_CRYPT)" \
- "d_mymalloc=$(PERL_MALLOC)" \
- "libs=$(LIBFILES:f)" \
- "incpath=$(CCINCDIR:s/"/\"/)" \
- "libperl=$(PERLIMPLIB:f)" \
- "libpth=$(CCLIBDIR:s/"/\"/);$(EXTRALIBDIRS:s/"/\"/)" \
- "libc=$(LIBC)" \
- "make=dmake" \
- "_o=$(o)" "obj_ext=$(o)" \
- "_a=$(a)" "lib_ext=$(a)" \
- "static_ext=$(STATIC_EXT)" \
- "dynamic_ext=$(DYNAMIC_EXT)" \
- "nonxs_ext=$(NONXS_EXT)" \
- "usethreads=$(USE_THREADS)" \
- "usemultiplicity=$(USE_MULTI)" \
- "LINK_FLAGS=$(LINK_FLAGS:s/"/\"/)" \
- "optimize=$(OPTIMIZE:s/"/\"/)"
+ INST_DRV=$(INST_DRV) ~ \
+ INST_TOP=$(INST_TOP:s/\/\\/) ~ \
+ INST_VER=$(INST_VER:s/\/\\/) ~ \
+ INST_ARCH=$(INST_ARCH) ~ \
+ archname=$(ARCHNAME) ~ \
+ cc=$(CC) ~ \
+ ld=$(LINK32) ~ \
+ ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ cf_email=$(EMAIL) ~ \
+ d_crypt=$(D_CRYPT) ~ \
+ d_mymalloc=$(PERL_MALLOC) ~ \
+ libs=$(LIBFILES:f) ~ \
+ incpath=$(CCINCDIR:s/\/\\/) ~ \
+ libperl=$(PERLIMPLIB:f) ~ \
+ libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
+ libc=$(LIBC) ~ \
+ make=dmake ~ \
+ _o=$(o) obj_ext=$(o) ~ \
+ _a=$(a) lib_ext=$(a) ~ \
+ static_ext=$(STATIC_EXT) ~ \
+ dynamic_ext=$(DYNAMIC_EXT) ~ \
+ nonxs_ext=$(NONXS_EXT) ~ \
+ use5005threads=$(USE_5005THREADS) ~ \
+ useithreads=$(USE_ITHREADS) ~ \
+ usethreads=$(USE_5005THREADS) ~ \
+ usemultiplicity=$(USE_MULTI) ~ \
+ LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
+ optimize=$(OPTIMIZE)
+
+#
+# set up targets varying between Win95 and WinNT builds
+#
+
+.IF "$(IS_WIN95)" == "define"
+MK2 = .\makefile.95
+RIGHTMAKE = __switch_makefiles
+NOOP = @rem
+.ELSE
+MK2 = __not_needed
+RIGHTMAKE =
+.ENDIF
#
# Top targets
#
-all : .\config.h $(GLOBEXE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) $(PERL95EXE) \
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
$(X2P) $(EXTENSION_DLL) $(EXTENSION_PM)
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-#------------------------------------------------------------
+#----------------------------------------------------------------
+
+#-------------------- BEGIN Win95 SPECIFIC ----------------------
+
+# this target is a jump-off point for Win95
+# 1. it switches to the Win95-specific makefile if it exists
+# (__do_switch_makefiles)
+# 2. it prints a message when the Win95-specific one finishes (__done)
+# 3. it then kills this makefile by trying to make __no_such_target
+
+__switch_makefiles: __do_switch_makefiles __done __no_such_target
+
+__do_switch_makefiles:
+.IF "$(NOTFIRST)" != "true"
+ if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
+.ELSE
+ $(NOOP)
+.ENDIF
+
+.IF "$(NOTFIRST)" != "true"
+__done:
+ @echo Build process complete. Ignore any errors after this message.
+ @echo Run "dmake test" to test and "dmake install" to install
+
+.ELSE
+# dummy targets for Win95-specific makefile
+
+__done:
+ $(NOOP)
+
+__no_such_target:
+ $(NOOP)
+
+.ENDIF
+
+# This target is used to generate the new makefile (.\makefile.95) for Win95
+
+.\makefile.95: .\makefile.mk
+ $(MINIPERL) genmk95.pl makefile.mk $(MK2)
+
+#--------------------- END Win95 SPECIFIC ---------------------
+
+# a blank target for when builds don't need to do certain things
+# this target added for Win95 port but used to keep the WinNT port able to
+# use this file
+__not_needed:
+ $(NOOP)
$(GLOBEXE) : perlglob$(o)
.IF "$(CCTYPE)" == "BORLAND"
$(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
- $(LINK32) -Tpe -ap $(LINK_FLAGS) c0x32$(o) perlglob$(o) \
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
"$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) $(LINK_FLAGS) -o $@ perlglob$(o) $(LIBFILES)
+ $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
.ELSE
- $(LINK32) $(LINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
- perlglob$(o) setargv$(o)
+ $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
.ENDIF
perlglob$(o) : perlglob.c
copy $(CFGH_TMPL) config.h
..\config.sh : config.w32 $(MINIPERL) config_sh.PL
- $(MINIPERL) -I..\lib config_sh.PL $(CFG_VARS) config.w32 > ..\config.sh
+ $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
+ $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
# this target is for when changes to the main config.sh happen
# edit config.{b,v,g}c and make this target once for each supported
# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
regen_config_h:
- perl config_sh.PL $(CFG_VARS) $(CFGSH_TMPL) > ..\config.sh
+ perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
+ $(CFGSH_TMPL) > ..\config.sh
-cd .. && del /f perl.exe
cd .. && perl configpm
-del /f $(CFGH_TMPL)
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM)
+ || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ)
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(LINK_FLAGS) \
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
.ENDIF
$(MINIDIR) :
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ ..\$(*B).c
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
+# unless the .IF is true), so instead we use a .ELSE with the default.
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
+.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+.ELSE
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+.ENDIF
+
# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
$(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
$(CORE_OBJ) : $(CORE_H)
$(DLL_OBJ) : $(CORE_H)
-$(PERL95_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) $(BUILDOPT) \
- CCTYPE=$(CCTYPE) > perldll.def
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+ $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ)
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpd -ap $(LINK_FLAGS) \
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
@$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
$@,\n \
$(LIBFILES)\n \
perldll.def\n)
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(LINK_FLAGS) \
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
- --dllname perl.dll \
- --def perldll.def \
- --base-file perl.base \
- --output-exp perl.exp
- $(LINK32) -mdll -o $@ $(LINK_FLAGS) \
+ --dllname $(PERLDLL:b).dll \
+ --def perldll.def \
+ --base-file perl.base \
+ --output-exp perl.exp
+ $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
- @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(PERLDLL_OBJ:s,\,\\))
+ @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
$(MINIPERL) ..\x2p\find2perl.PL
$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(LINK_FLAGS) \
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -v -o $@ $(LINK_FLAGS) \
+ $(LINK32) -v -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(LINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
.ENDIF
-perlmain.c : runperl.c
+perlmain.c : runperl.c
copy runperl.c perlmain.c
perlmain$(o) : perlmain.c
$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ)
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
- $(LINK32) -Tpe -ap $(LINK_FLAGS) \
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
$(@:s,\,\\),\n \
$(PERLIMPLIB) $(LIBFILES)\n)
.ELIF "$(CCTYPE)" == "GCC"
- $(LINK32) -o $@ $(LINK_FLAGS) \
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
.ELSE
- $(LINK32) -subsystem:console -out:$@ $(LINK_FLAGS) $(LIBFILES) \
- $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB)
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
.ENDIF
- copy splittree.pl ..
+ copy $(PERLEXE) $(WPERLEXE)
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+ copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
-.IF "$(CCTYPE)" != "BORLAND"
-.IF "$(CCTYPE)" != "GCC"
-.IF "$(USE_PERLCRT)" == ""
-
-perl95.c : runperl.c
- copy runperl.c perl95.c
-
-perl95$(o) : perl95.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c perl95.c
-
-win32sckmt$(o) : win32sck.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)win32sckmt$(o) win32sck.c
-
-win32mt$(o) : win32.c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)win32mt$(o) win32.c
-
-DynaLoadmt$(o) : $(DYNALOADER).c
- $(CC) $(CFLAGS_O) -MT -UPERLDLL -DWIN95FIX -c \
- $(OBJOUT_FLAG)DynaLoadmt$(o) $(DYNALOADER).c
-
-$(PERL95EXE): $(PERLDLL) $(CONFIGPM) $(PERL95_OBJ)
- $(LINK32) -subsystem:console -nodefaultlib -out:$@ $(LINK_FLAGS) \
- $(LIBBASEFILES) $(PERL95_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) \
- libcmt.lib
-
-.ENDIF
-.ENDIF
-.ENDIF
-
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
$(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
$(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-$(DUMPER_DLL): $(PERLEXE) $(DUMPER).xs
+$(DUMPER_DLL): $(PERLDEP) $(DUMPER).xs
cd $(EXTDIR)\Data\$(*B) && \
..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\Data\$(*B) && $(MAKE)
-$(DPROF_DLL): $(PERLEXE) $(DPROF).xs
+$(DPROF_DLL): $(PERLDEP) $(DPROF).xs
cd $(EXTDIR)\Devel\$(*B) && \
..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-$(PEEK_DLL): $(PERLEXE) $(PEEK).xs
+$(GLOB_DLL): $(PERLDEP) $(GLOB).xs
+ cd $(EXTDIR)\File\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\File\$(*B) && $(MAKE)
+
+$(PEEK_DLL): $(PERLDEP) $(PEEK).xs
cd $(EXTDIR)\Devel\$(*B) && \
..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\Devel\$(*B) && $(MAKE)
-$(RE_DLL): $(PERLEXE) $(RE).xs
+$(RE_DLL): $(PERLDEP) $(RE).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(B_DLL): $(PERLEXE) $(B).xs
+$(B_DLL): $(PERLDEP) $(B).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(THREAD_DLL): $(PERLEXE) $(THREAD).xs
+$(THREAD_DLL): $(PERLDEP) $(THREAD).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(ATTRS_DLL): $(PERLEXE) $(ATTRS).xs
+$(ATTRS_DLL): $(PERLDEP) $(ATTRS).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(POSIX_DLL): $(PERLEXE) $(POSIX).xs
+$(POSIX_DLL): $(PERLDEP) $(POSIX).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(IO_DLL): $(PERLEXE) $(IO).xs
+$(IO_DLL): $(PERLDEP) $(IO).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(SDBM_FILE_DLL) : $(PERLEXE) $(SDBM_FILE).xs
+$(SDBM_FILE_DLL) : $(PERLDEP) $(SDBM_FILE).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(FCNTL_DLL): $(PERLEXE) $(FCNTL).xs
+$(FCNTL_DLL): $(PERLDEP) $(FCNTL).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(OPCODE_DLL): $(PERLEXE) $(OPCODE).xs
+$(OPCODE_DLL): $(PERLDEP) $(OPCODE).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(SOCKET_DLL): $(PERLEXE) $(SOCKET).xs
+$(SOCKET_DLL): $(PERLDEP) $(SOCKET).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(BYTELOADER_DLL): $(PERLEXE) $(BYTELOADER).xs
+$(HOSTNAME_DLL): $(PERLDEP) $(HOSTNAME).xs
+ cd $(EXTDIR)\Sys\$(*B) && \
+ ..\..\..\miniperl -I..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Sys\$(*B) && $(MAKE)
+
+$(BYTELOADER_DLL): $(PERLDEP) $(BYTELOADER).xs
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
-$(ERRNO_PM): $(PERLEXE) $(ERRNO)_pm.PL
+$(ENCODE_DLL): $(PERLDEP) $(ENCODE).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(STORABLE_DLL): $(PERLDEP) $(STORABLE).xs
+ cd $(EXTDIR)\$(*B) && \
+ ..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\$(*B) && $(MAKE)
+
+$(FILTER_DLL): $(PERLDEP) $(FILTER).xs
+ cd $(EXTDIR)\Filter\Util\Call && \
+ ..\..\..\..\miniperl -I..\..\..\..\lib Makefile.PL INSTALLDIRS=perl
+ cd $(EXTDIR)\Filter\Util\Call && $(MAKE)
+
+$(ERRNO_PM): $(PERLDEP) $(ERRNO)_pm.PL
cd $(EXTDIR)\$(*B) && \
..\..\miniperl -I..\..\lib Makefile.PL INSTALLDIRS=perl
cd $(EXTDIR)\$(*B) && $(MAKE)
utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\README.win32 ..\pod\perlwin32.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\vms\perlvms.pod ..\pod\perlvms.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+ cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
distclean: clean
- -del /f $(MINIPERL) $(PERLEXE) $(PERL95EXE) $(PERLDLL) $(GLOBEXE) \
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-del /f *.def *.map
-del /f $(EXTENSION_DLL) $(EXTENSION_PM)
-del /f $(EXTENSION_C) $(DYNALOADER).c $(ERRNO).pm
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
-del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
- -rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
- -rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
- -rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
+ -del /f $(LIBDIR)\File\Glob.pm
+ -del /f $(LIBDIR)\Storable.pm
+ -del /f $(LIBDIR)\Filter\Util\Call\Call.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter
-del /f $(PODDIR)\*.html
-del /f $(PODDIR)\*.bat
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \
- dprofpp pstruct *.bat
+ dprofpp *.bat
-cd ..\x2p && del /f find2perl s2p *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-.IF "$(PERL95EXE)" != ""
- -del /f perl95.c
-.ENDIF
-del /f bin\*.bat
-cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \
pm_to_blib
- -rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
- -rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)
install : all installbare installhtml
-installbare : utils
+installbare : $(RIGHTMAKE) utils
$(PERLEXE) ..\installperl
-.IF "$(PERL95EXE)" != ""
- $(XCOPY) $(PERL95EXE) $(INST_BIN)\*.*
-.ENDIF
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
$(RCOPY) html\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
- copy splittree.pl ..
+ copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
-test : test-prep
+test : $(RIGHTMAKE) test-prep
cd ..\t && $(PERLEXE) -I..\lib harness
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
+ cd ..\t && $(PERLEXE) -I.\lib harness
+
+test-wide : test-prep
+ set HARNESS_PERL_SWITCHES=-C && \
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
+test-wide-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1 && \
+ set HARNESS_PERL_SWITCHES=-C && \
+ cd ..\t && $(PERLEXE) -I..\lib harness
-clean :
+clean :
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
-@erase perlglob$(o)
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
+ -@erase $(WPERLEXE)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "dmake nok" instead.
+ok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
https://perl5.git.perl.org / perl5.git / blobdiff