/* utility functions for handling locale-specific stuff like what
* character represents the decimal point.
*
- * All C programs have an underlying locale. Perl generally doesn't pay any
- * attention to it except within the scope of a 'use locale'. For most
+ * All C programs have an underlying locale. Perl code generally doesn't pay
+ * any attention to it except within the scope of a 'use locale'. For most
* categories, it accomplishes this by just using different operations if it is
* in such scope than if not. However, various libc functions called by Perl
* are affected by the LC_NUMERIC category, so there are macros in perl.h that
#include "EXTERN.h"
#define PERL_IN_LOCALE_C
+#include "perl_langinfo.h"
#include "perl.h"
-#ifdef I_LANGINFO
-# include <langinfo.h>
-#endif
-
#include "reentr.h"
/* If the environment says to, we can output debugging information during
* initialization. This is done before option parsing, and before any thread
* creation, so can be a file-level static */
-#ifdef DEBUGGING
-# ifdef PERL_GLOBAL_STRUCT
- /* no global syms allowed */
+#if ! defined(DEBUGGING) || defined(PERL_GLOBAL_STRUCT)
# define debug_initialization 0
# define DEBUG_INITIALIZATION_set(v)
-# else
+#else
static bool debug_initialization = FALSE;
# define DEBUG_INITIALIZATION_set(v) (debug_initialization = v)
-# endif
#endif
+/* strlen() of a literal string constant. We might want this more general,
+ * but using it in just this file for now. A problem with more generality is
+ * the compiler warnings about comparing unlike signs */
+#define STRLENs(s) (sizeof("" s "") - 1)
+
+/* Is the C string input 'name' "C" or "POSIX"? If so, and 'name' is the
+ * return of setlocale(), then this is extremely likely to be the C or POSIX
+ * locale. However, the output of setlocale() is documented to be opaque, but
+ * the odds are extremely small that it would return these two strings for some
+ * other locale. Note that VMS in these two locales includes many non-ASCII
+ * characters as controls and punctuation (below are hex bytes):
+ * cntrl: 84-97 9B-9F
+ * punct: A1-A3 A5 A7-AB B0-B3 B5-B7 B9-BD BF-CF D1-DD DF-EF F1-FD
+ * Oddly, none there are listed as alphas, though some represent alphabetics
+ * http://www.nntp.perl.org/group/perl.perl5.porters/2013/02/msg198753.html */
+#define isNAME_C_OR_POSIX(name) \
+ ( (name) != NULL \
+ && (( *(name) == 'C' && (*(name + 1)) == '\0') \
+ || strEQ((name), "POSIX")))
+
#ifdef USE_LOCALE
-/*
- * Standardize the locale name from a string returned by 'setlocale', possibly
- * modifying that string.
- *
- * The typical return value of setlocale() is either
- * (1) "xx_YY" if the first argument of setlocale() is not LC_ALL
- * (2) "xa_YY xb_YY ..." if the first argument of setlocale() is LC_ALL
- * (the space-separated values represent the various sublocales,
- * in some unspecified order). This is not handled by this function.
+/* This code keeps a LRU cache of the UTF-8ness of the locales it has so-far
+ * looked up. This is in the form of a C string: */
+
+#define UTF8NESS_SEP "\v"
+#define UTF8NESS_PREFIX "\f"
+
+/* So, the string looks like:
*
- * In some platforms it has a form like "LC_SOMETHING=Lang_Country.866\n",
- * which is harmful for further use of the string in setlocale(). This
- * function removes the trailing new line and everything up through the '='
+ * \vC\a0\vPOSIX\a0\vam_ET\a0\vaf_ZA.utf8\a1\ven_US.UTF-8\a1\0
*
- */
+ * where the digit 0 after the \a indicates that the locale starting just
+ * after the preceding \v is not UTF-8, and the digit 1 mean it is. */
+
+STATIC_ASSERT_DECL(STRLENs(UTF8NESS_SEP) == 1);
+STATIC_ASSERT_DECL(STRLENs(UTF8NESS_PREFIX) == 1);
+
+#define C_and_POSIX_utf8ness UTF8NESS_SEP "C" UTF8NESS_PREFIX "0" \
+ UTF8NESS_SEP "POSIX" UTF8NESS_PREFIX "0"
+
+/* The cache is initialized to C_and_POSIX_utf8ness at start up. These are
+ * kept there always. The remining portion of the cache is LRU, with the
+ * oldest looked-up locale at the tail end */
+
STATIC char *
S_stdize_locale(pTHX_ char *locs)
{
+ /* Standardize the locale name from a string returned by 'setlocale',
+ * possibly modifying that string.
+ *
+ * The typical return value of setlocale() is either
+ * (1) "xx_YY" if the first argument of setlocale() is not LC_ALL
+ * (2) "xa_YY xb_YY ..." if the first argument of setlocale() is LC_ALL
+ * (the space-separated values represent the various sublocales,
+ * in some unspecified order). This is not handled by this function.
+ *
+ * In some platforms it has a form like "LC_SOMETHING=Lang_Country.866\n",
+ * which is harmful for further use of the string in setlocale(). This
+ * function removes the trailing new line and everything up through the '='
+ * */
+
const char * const s = strchr(locs, '=');
bool okay = TRUE;
return locs;
}
+/* Two parallel arrays; first the locale categories Perl uses on this system;
+ * the second array is their names. These arrays are in mostly arbitrary
+ * order. */
+
+const int categories[] = {
+
+# ifdef USE_LOCALE_NUMERIC
+ LC_NUMERIC,
+# endif
+# ifdef USE_LOCALE_CTYPE
+ LC_CTYPE,
+# endif
+# ifdef USE_LOCALE_COLLATE
+ LC_COLLATE,
+# endif
+# ifdef USE_LOCALE_TIME
+ LC_TIME,
+# endif
+# ifdef USE_LOCALE_MESSAGES
+ LC_MESSAGES,
+# endif
+# ifdef USE_LOCALE_MONETARY
+ LC_MONETARY,
+# endif
+# ifdef USE_LOCALE_ADDRESS
+ LC_ADDRESS,
+# endif
+# ifdef USE_LOCALE_IDENTIFICATION
+ LC_IDENTIFICATION,
+# endif
+# ifdef USE_LOCALE_MEASUREMENT
+ LC_MEASUREMENT,
+# endif
+# ifdef USE_LOCALE_PAPER
+ LC_PAPER,
+# endif
+# ifdef USE_LOCALE_TELEPHONE
+ LC_TELEPHONE,
+# endif
+# ifdef LC_ALL
+ LC_ALL,
+# endif
+ -1 /* Placeholder because C doesn't allow a
+ trailing comma, and it would get complicated
+ with all the #ifdef's */
+};
+
+/* The top-most real element is LC_ALL */
+
+const char * category_names[] = {
+
+# ifdef USE_LOCALE_NUMERIC
+ "LC_NUMERIC",
+# endif
+# ifdef USE_LOCALE_CTYPE
+ "LC_CTYPE",
+# endif
+# ifdef USE_LOCALE_COLLATE
+ "LC_COLLATE",
+# endif
+# ifdef USE_LOCALE_TIME
+ "LC_TIME",
+# endif
+# ifdef USE_LOCALE_MESSAGES
+ "LC_MESSAGES",
+# endif
+# ifdef USE_LOCALE_MONETARY
+ "LC_MONETARY",
+# endif
+# ifdef USE_LOCALE_ADDRESS
+ "LC_ADDRESS",
+# endif
+# ifdef USE_LOCALE_IDENTIFICATION
+ "LC_IDENTIFICATION",
+# endif
+# ifdef USE_LOCALE_MEASUREMENT
+ "LC_MEASUREMENT",
+# endif
+# ifdef USE_LOCALE_PAPER
+ "LC_PAPER",
+# endif
+# ifdef USE_LOCALE_TELEPHONE
+ "LC_TELEPHONE",
+# endif
+# ifdef LC_ALL
+ "LC_ALL",
+# endif
+ NULL /* Placeholder */
+ };
+
+# ifdef LC_ALL
+
+ /* On systems with LC_ALL, it is kept in the highest index position. (-2
+ * to account for the final unused placeholder element.) */
+# define NOMINAL_LC_ALL_INDEX (C_ARRAY_LENGTH(categories) - 2)
+
+# else
+
+ /* On systems without LC_ALL, we pretend it is there, one beyond the real
+ * top element, hence in the unused placeholder element. */
+# define NOMINAL_LC_ALL_INDEX (C_ARRAY_LENGTH(categories) - 1)
+
+# endif
+
+/* Pretending there is an LC_ALL element just above allows us to avoid most
+ * special cases. Most loops through these arrays in the code below are
+ * written like 'for (i = 0; i < NOMINAL_LC_ALL_INDEX; i++)'. They will work
+ * on either type of system. But the code must be written to not access the
+ * element at 'LC_ALL_INDEX' except on platforms that have it. This can be
+ * checked for at compile time by using the #define LC_ALL_INDEX which is only
+ * defined if we do have LC_ALL. */
+
+STATIC const char *
+S_category_name(const int category)
+{
+ unsigned int i;
+
+#ifdef LC_ALL
+
+ if (category == LC_ALL) {
+ return "LC_ALL";
+ }
+
#endif
+ for (i = 0; i < NOMINAL_LC_ALL_INDEX; i++) {
+ if (category == categories[i]) {
+ return category_names[i];
+ }
+ }
+
+ {
+ const char suffix[] = " (unknown)";
+ int temp = category;
+ Size_t length = sizeof(suffix) + 1;
+ char * unknown;
+ dTHX;
+
+ if (temp < 0) {
+ length++;
+ temp = - temp;
+ }
+
+ /* Calculate the number of digits */
+ while (temp >= 10) {
+ temp /= 10;
+ length++;
+ }
+
+ Newx(unknown, length, char);
+ my_snprintf(unknown, length, "%d%s", category, suffix);
+ SAVEFREEPV(unknown);
+ return unknown;
+ }
+}
+
+/* Now create LC_foo_INDEX #defines for just those categories on this system */
+# ifdef USE_LOCALE_NUMERIC
+# define LC_NUMERIC_INDEX 0
+# define _DUMMY_NUMERIC LC_NUMERIC_INDEX
+# else
+# define _DUMMY_NUMERIC -1
+# endif
+# ifdef USE_LOCALE_CTYPE
+# define LC_CTYPE_INDEX _DUMMY_NUMERIC + 1
+# define _DUMMY_CTYPE LC_CTYPE_INDEX
+# else
+# define _DUMMY_CTYPE _DUMMY_NUMERIC
+# endif
+# ifdef USE_LOCALE_COLLATE
+# define LC_COLLATE_INDEX _DUMMY_CTYPE + 1
+# define _DUMMY_COLLATE LC_COLLATE_INDEX
+# else
+# define _DUMMY_COLLATE _DUMMY_COLLATE
+# endif
+# ifdef USE_LOCALE_TIME
+# define LC_TIME_INDEX _DUMMY_COLLATE + 1
+# define _DUMMY_TIME LC_TIME_INDEX
+# else
+# define _DUMMY_TIME _DUMMY_COLLATE
+# endif
+# ifdef USE_LOCALE_MESSAGES
+# define LC_MESSAGES_INDEX _DUMMY_TIME + 1
+# define _DUMMY_MESSAGES LC_MESSAGES_INDEX
+# else
+# define _DUMMY_MESSAGES _DUMMY_TIME
+# endif
+# ifdef USE_LOCALE_MONETARY
+# define LC_MONETARY_INDEX _DUMMY_MESSAGES + 1
+# define _DUMMY_MONETARY LC_MONETARY_INDEX
+# else
+# define _DUMMY_MONETARY _DUMMY_MESSAGES
+# endif
+# ifdef USE_LOCALE_ADDRESS
+# define LC_ADDRESS_INDEX _DUMMY_MONETARY + 1
+# define _DUMMY_ADDRESS LC_ADDRESS_INDEX
+# else
+# define _DUMMY_ADDRESS _DUMMY_MONETARY
+# endif
+# ifdef USE_LOCALE_IDENTIFICATION
+# define LC_IDENTIFICATION_INDEX _DUMMY_ADDRESS + 1
+# define _DUMMY_IDENTIFICATION LC_IDENTIFICATION_INDEX
+# else
+# define _DUMMY_IDENTIFICATION _DUMMY_ADDRESS
+# endif
+# ifdef USE_LOCALE_MEASUREMENT
+# define LC_MEASUREMENT_INDEX _DUMMY_IDENTIFICATION + 1
+# define _DUMMY_MEASUREMENT LC_MEASUREMENT_INDEX
+# else
+# define _DUMMY_MEASUREMENT _DUMMY_IDENTIFICATION
+# endif
+# ifdef USE_LOCALE_PAPER
+# define LC_PAPER_INDEX _DUMMY_MEASUREMENT + 1
+# define _DUMMY_PAPER LC_PAPER_INDEX
+# else
+# define _DUMMY_PAPER _DUMMY_MEASUREMENT
+# endif
+# ifdef USE_LOCALE_TELEPHONE
+# define LC_TELEPHONE_INDEX _DUMMY_PAPER + 1
+# define _DUMMY_TELEPHONE LC_TELEPHONE_INDEX
+# else
+# define _DUMMY_TELEPHONE _DUMMY_PAPER
+# endif
+# ifdef LC_ALL
+# define LC_ALL_INDEX _DUMMY_TELEPHONE + 1
+# endif
+#endif /* ifdef USE_LOCALE */
+
+/* Windows requres a customized base-level setlocale() */
+# ifdef WIN32
+# define my_setlocale(cat, locale) win32_setlocale(cat, locale)
+# else
+# define my_setlocale(cat, locale) setlocale(cat, locale)
+# endif
+
+/* Just placeholders for now. "_c" is intended to be called when the category
+ * is a constant known at compile time; "_r", not known until run time */
+# define do_setlocale_c(category, locale) my_setlocale(category, locale)
+# define do_setlocale_r(category, locale) my_setlocale(category, locale)
+
STATIC void
-S_set_numeric_radix(pTHX)
+S_set_numeric_radix(pTHX_ const bool use_locale)
{
-#ifdef USE_LOCALE_NUMERIC
-# ifdef HAS_LOCALECONV
- const struct lconv* const lc = localeconv();
+ /* If 'use_locale' is FALSE, set to use a dot for the radix character. If
+ * TRUE, use the radix character derived from the current locale */
- if (lc && lc->decimal_point) {
- if (lc->decimal_point[0] == '.' && lc->decimal_point[1] == 0) {
- SvREFCNT_dec(PL_numeric_radix_sv);
- PL_numeric_radix_sv = NULL;
- }
- else {
- if (PL_numeric_radix_sv)
- sv_setpv(PL_numeric_radix_sv, lc->decimal_point);
- else
- PL_numeric_radix_sv = newSVpv(lc->decimal_point, 0);
- if (! is_utf8_invariant_string((U8 *) lc->decimal_point, 0)
- && is_utf8_string((U8 *) lc->decimal_point, 0)
+#if defined(USE_LOCALE_NUMERIC) && ( defined(HAS_LOCALECONV) \
+ || defined(HAS_NL_LANGINFO))
+
+ /* We only set up the radix SV if we are to use a locale radix ... */
+ if (use_locale) {
+ const char * radix = my_nl_langinfo(PERL_RADIXCHAR, FALSE);
+ /* FALSE => already in dest locale */
+ /* ... and the character being used isn't a dot */
+ if (strNE(radix, ".")) {
+
+ if (PL_numeric_radix_sv) {
+ sv_setpv(PL_numeric_radix_sv, radix);
+ }
+ else {
+ PL_numeric_radix_sv = newSVpv(radix, 0);
+ }
+
+ /* If this is valid UTF-8 that isn't totally ASCII, and we are in
+ * a UTF-8 locale, then mark the radix as being in UTF-8 */
+ if (is_utf8_non_invariant_string((U8 *) SvPVX(PL_numeric_radix_sv),
+ SvCUR(PL_numeric_radix_sv))
&& _is_cur_LC_category_utf8(LC_NUMERIC))
{
- SvUTF8_on(PL_numeric_radix_sv);
+ SvUTF8_on(PL_numeric_radix_sv);
}
- }
+ goto done;
+ }
}
- else
- PL_numeric_radix_sv = NULL;
-#ifdef DEBUGGING
+ SvREFCNT_dec(PL_numeric_radix_sv);
+ PL_numeric_radix_sv = NULL;
+
+ done: ;
+
+# ifdef DEBUGGING
+
if (DEBUG_L_TEST || debug_initialization) {
PerlIO_printf(Perl_debug_log, "Locale radix is '%s', ?UTF-8=%d\n",
(PL_numeric_radix_sv)
? cBOOL(SvUTF8(PL_numeric_radix_sv))
: 0);
}
-#endif
-# endif /* HAS_LOCALECONV */
-#endif /* USE_LOCALE_NUMERIC */
+# endif
+#endif /* USE_LOCALE_NUMERIC and can find the radix char */
+
}
-/* Is the C string input 'name' "C" or "POSIX"? If so, and 'name' is the
- * return of setlocale(), then this is extremely likely to be the C or POSIX
- * locale. However, the output of setlocale() is documented to be opaque, but
- * the odds are extremely small that it would return these two strings for some
- * other locale. Note that VMS in these two locales includes many non-ASCII
- * characters as controls and punctuation (below are hex bytes):
- * cntrl: 00-1F 7F 84-97 9B-9F
- * punct: 21-2F 3A-40 5B-60 7B-7E A1-A3 A5 A7-AB B0-B3 B5-B7 B9-BD BF-CF D1-DD DF-EF F1-FD
- * Oddly, none there are listed as alphas, though some represent alphabetics
- * http://www.nntp.perl.org/group/perl.perl5.porters/2013/02/msg198753.html */
-#define isNAME_C_OR_POSIX(name) ((name) != NULL \
- && ((*(name) == 'C' && (*(name + 1)) == '\0') \
- || strEQ((name), "POSIX")))
void
Perl_new_numeric(pTHX_ const char *newnum)
{
-#ifdef USE_LOCALE_NUMERIC
- /* Called after all libc setlocale() calls affecting LC_NUMERIC, to tell
+#ifndef USE_LOCALE_NUMERIC
+
+ PERL_UNUSED_ARG(newnum);
+
+#else
+
+ /* Called after each libc setlocale() call affecting LC_NUMERIC, to tell
* core Perl this and that 'newnum' is the name of the new locale.
* It installs this locale as the current underlying default.
*
* The default locale and the C locale can be toggled between by use of the
- * set_numeric_local() and set_numeric_standard() functions, which should
- * probably not be called directly, but only via macros like
+ * set_numeric_underlying() and set_numeric_standard() functions, which
+ * should probably not be called directly, but only via macros like
* SET_NUMERIC_STANDARD() in perl.h.
*
* The toggling is necessary mainly so that a non-dot radix decimal point
*
* This sets several interpreter-level variables:
* PL_numeric_name The underlying locale's name: a copy of 'newnum'
- * PL_numeric_local A boolean indicating if the toggled state is such
+ * PL_numeric_underlying A boolean indicating if the toggled state is such
* that the current locale is the program's underlying
* locale
* PL_numeric_standard An int indicating if the toggled state is such
- * that the current locale is the C locale. If non-zero,
- * it is in C; if > 1, it means it may not be toggled away
+ * that the current locale is the C locale or
+ * indistinguishable from the C locale. If non-zero, it
+ * is in C; if > 1, it means it may not be toggled away
* from C.
- * Note that both of the last two variables can be true at the same time,
- * if the underlying locale is C. (Toggling is a no-op under these
- * circumstances.)
- *
+ * PL_numeric_underlying_is_standard A bool kept by this function
+ * indicating that the underlying locale and the standard
+ * C locale are indistinguishable for the purposes of
+ * LC_NUMERIC. This happens when both of the above two
+ * variables are true at the same time. (Toggling is a
+ * no-op under these circumstances.) This variable is
+ * used to avoid having to recalculate.
* Any code changing the locale (outside this file) should use
* POSIX::setlocale, which calls this function. Therefore this function
* should be called directly only from this file and from
Safefree(PL_numeric_name);
PL_numeric_name = NULL;
PL_numeric_standard = TRUE;
- PL_numeric_local = TRUE;
+ PL_numeric_underlying = TRUE;
+ PL_numeric_underlying_is_standard = TRUE;
return;
}
save_newnum = stdize_locale(savepv(newnum));
-
+ PL_numeric_underlying = TRUE;
PL_numeric_standard = isNAME_C_OR_POSIX(save_newnum);
- PL_numeric_local = TRUE;
+ /* If its name isn't C nor POSIX, it could still be indistinguishable from
+ * them */
+ if (! PL_numeric_standard) {
+ PL_numeric_standard = cBOOL(strEQ(".", my_nl_langinfo(PERL_RADIXCHAR,
+ FALSE /* Don't toggle locale */ ))
+ && strEQ("", my_nl_langinfo(PERL_THOUSEP,
+ FALSE)));
+ }
+
+ /* Save the new name if it isn't the same as the previous one, if any */
if (! PL_numeric_name || strNE(PL_numeric_name, save_newnum)) {
Safefree(PL_numeric_name);
PL_numeric_name = save_newnum;
Safefree(save_newnum);
}
+ PL_numeric_underlying_is_standard = PL_numeric_standard;
+
+ if (DEBUG_L_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "Called new_numeric with %s, PL_numeric_name=%s\n", newnum, PL_numeric_name);
+ }
+
/* Keep LC_NUMERIC in the C locale. This is for XS modules, so they don't
* have to worry about the radix being a non-dot. (Core operations that
* need the underlying locale change to it temporarily). */
set_numeric_standard();
- set_numeric_radix();
-
-#else
- PERL_UNUSED_ARG(newnum);
#endif /* USE_LOCALE_NUMERIC */
+
}
void
Perl_set_numeric_standard(pTHX)
{
+
#ifdef USE_LOCALE_NUMERIC
+
/* Toggle the LC_NUMERIC locale to C. Most code should use the macros like
* SET_NUMERIC_STANDARD() in perl.h instead of calling this directly. The
* macro avoids calling this routine if toggling isn't necessary according
* to our records (which could be wrong if some XS code has changed the
* locale behind our back) */
- setlocale(LC_NUMERIC, "C");
+ do_setlocale_c(LC_NUMERIC, "C");
PL_numeric_standard = TRUE;
- PL_numeric_local = isNAME_C_OR_POSIX(PL_numeric_name);
- set_numeric_radix();
-#ifdef DEBUGGING
+ PL_numeric_underlying = PL_numeric_underlying_is_standard;
+ set_numeric_radix(0);
+
+# ifdef DEBUGGING
+
if (DEBUG_L_TEST || debug_initialization) {
PerlIO_printf(Perl_debug_log,
- "Underlying LC_NUMERIC locale now is C\n");
+ "LC_NUMERIC locale now is standard C\n");
}
-#endif
+# endif
#endif /* USE_LOCALE_NUMERIC */
+
}
void
-Perl_set_numeric_local(pTHX)
+Perl_set_numeric_underlying(pTHX)
{
+
#ifdef USE_LOCALE_NUMERIC
+
/* Toggle the LC_NUMERIC locale to the current underlying default. Most
- * code should use the macros like SET_NUMERIC_LOCAL() in perl.h instead of
- * calling this directly. The macro avoids calling this routine if
- * toggling isn't necessary according to our records (which could be wrong
- * if some XS code has changed the locale behind our back) */
-
- setlocale(LC_NUMERIC, PL_numeric_name);
- PL_numeric_standard = isNAME_C_OR_POSIX(PL_numeric_name);
- PL_numeric_local = TRUE;
- set_numeric_radix();
-#ifdef DEBUGGING
+ * code should use the macros like SET_NUMERIC_UNDERLYING() in perl.h
+ * instead of calling this directly. The macro avoids calling this routine
+ * if toggling isn't necessary according to our records (which could be
+ * wrong if some XS code has changed the locale behind our back) */
+
+ do_setlocale_c(LC_NUMERIC, PL_numeric_name);
+ PL_numeric_standard = PL_numeric_underlying_is_standard;
+ PL_numeric_underlying = TRUE;
+ set_numeric_radix(! PL_numeric_standard);
+
+# ifdef DEBUGGING
+
if (DEBUG_L_TEST || debug_initialization) {
PerlIO_printf(Perl_debug_log,
- "Underlying LC_NUMERIC locale now is %s\n",
+ "LC_NUMERIC locale now is %s\n",
PL_numeric_name);
}
-#endif
+# endif
#endif /* USE_LOCALE_NUMERIC */
+
}
/*
STATIC void
S_new_ctype(pTHX_ const char *newctype)
{
-#ifdef USE_LOCALE_CTYPE
- /* Called after all libc setlocale() calls affecting LC_CTYPE, to tell
+#ifndef USE_LOCALE_CTYPE
+
+ PERL_ARGS_ASSERT_NEW_CTYPE;
+ PERL_UNUSED_ARG(newctype);
+ PERL_UNUSED_CONTEXT;
+
+#else
+
+ /* Called after each libc setlocale() call affecting LC_CTYPE, to tell
* core Perl this and that 'newctype' is the name of the new locale.
*
* This function sets up the folding arrays for all 256 bytes, assuming
unsigned int bad_count = 0; /* Count of bad characters */
for (i = 0; i < 256; i++) {
- if (isUPPER_LC((U8) i))
- PL_fold_locale[i] = (U8) toLOWER_LC((U8) i);
- else if (isLOWER_LC((U8) i))
- PL_fold_locale[i] = (U8) toUPPER_LC((U8) i);
+ if (isupper(i))
+ PL_fold_locale[i] = (U8) tolower(i);
+ else if (islower(i))
+ PL_fold_locale[i] = (U8) toupper(i);
else
PL_fold_locale[i] = (U8) i;
* nowadays. It isn't a problem for most controls to be changed
* into something else; we check only \n and \t, though perhaps \r
* could be an issue as well. */
- if (check_for_problems
+ if ( check_for_problems
&& (isGRAPH_A(i) || isBLANK_A(i) || i == '\n'))
{
- if ((isALPHANUMERIC_A(i) && ! isALPHANUMERIC_LC(i))
- || (isPUNCT_A(i) && ! isPUNCT_LC(i))
- || (isBLANK_A(i) && ! isBLANK_LC(i))
- || (i == '\n' && ! isCNTRL_LC(i)))
+ if ( cBOOL(isalnum(i)) != cBOOL(isALPHANUMERIC(i))
+ || cBOOL(isalpha(i)) != cBOOL(isALPHA_A(i))
+ || cBOOL(isdigit(i)) != cBOOL(isDIGIT_A(i))
+ || cBOOL(isgraph(i)) != cBOOL(isGRAPH_A(i))
+ || cBOOL(islower(i)) != cBOOL(isLOWER_A(i))
+ || cBOOL(isprint(i)) != cBOOL(isPRINT_A(i))
+ || cBOOL(ispunct(i)) != cBOOL(isPUNCT_A(i))
+ || cBOOL(isspace(i)) != cBOOL(isSPACE_A(i))
+ || cBOOL(isupper(i)) != cBOOL(isUPPER_A(i))
+ || cBOOL(isxdigit(i))!= cBOOL(isXDIGIT_A(i))
+ || tolower(i) != (int) toLOWER_A(i)
+ || toupper(i) != (int) toUPPER_A(i)
+ || (i == '\n' && ! isCNTRL_LC(i)))
{
if (bad_count) { /* Separate multiple entries with a
blank */
}
}
-#ifdef MB_CUR_MAX
+# ifdef MB_CUR_MAX
+
/* We only handle single-byte locales (outside of UTF-8 ones; so if
* this locale requires more than one byte, there are going to be
* problems. */
{
multi_byte_locale = TRUE;
}
-#endif
+
+# endif
if (bad_count || multi_byte_locale) {
PL_warn_locale = Perl_newSVpvf(aTHX_
* here is transparent to this function's caller */
const char * const badlocale = savepv(newctype);
- setlocale(LC_CTYPE, "C");
+ do_setlocale_c(LC_CTYPE, "C");
/* The '0' below suppresses a bogus gcc compiler warning */
Perl_warner(aTHX_ packWARN(WARN_LOCALE), SvPVX(PL_warn_locale), 0);
- setlocale(LC_CTYPE, badlocale);
+ do_setlocale_c(LC_CTYPE, badlocale);
Safefree(badlocale);
if (IN_LC(LC_CTYPE)) {
}
#endif /* USE_LOCALE_CTYPE */
- PERL_ARGS_ASSERT_NEW_CTYPE;
- PERL_UNUSED_ARG(newctype);
- PERL_UNUSED_CONTEXT;
+
}
void
* _CHECK_AND_WARN_PROBLEMATIC_LOCALE */
if (PL_warn_locale) {
- /*GCC_DIAG_IGNORE(-Wformat-security); Didn't work */
Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
SvPVX(PL_warn_locale),
0 /* dummy to avoid compiler warning */ );
- /* GCC_DIAG_RESTORE; */
SvREFCNT_dec_NN(PL_warn_locale);
PL_warn_locale = NULL;
}
STATIC void
S_new_collate(pTHX_ const char *newcoll)
{
-#ifdef USE_LOCALE_COLLATE
- /* Called after all libc setlocale() calls affecting LC_COLLATE, to tell
+#ifndef USE_LOCALE_COLLATE
+
+ PERL_UNUSED_ARG(newcoll);
+ PERL_UNUSED_CONTEXT;
+
+#else
+
+ /* Called after each libc setlocale() call affecting LC_COLLATE, to tell
* core Perl this and that 'newcoll' is the name of the new locale.
*
- * Any code changing the locale (outside this file) should use
- * POSIX::setlocale, which calls this function. Therefore this function
- * should be called directly only from this file and from
- * POSIX::setlocale().
- *
* The design of locale collation is that every locale change is given an
* index 'PL_collation_ix'. The first time a string particpates in an
* operation that requires collation while locale collation is active, it
PL_collxfrm_base = base + 1;
}
-#ifdef DEBUGGING
+# ifdef DEBUGGING
+
if (DEBUG_L_TEST || debug_initialization) {
PerlIO_printf(Perl_debug_log,
"%s:%d: ?UTF-8 locale=%d; x_len_shorter=%zu, "
x_len_shorter, x_len_longer,
PL_collxfrm_mult, PL_collxfrm_base);
}
-#endif
+# endif
+
}
}
-#else
- PERL_UNUSED_ARG(newcoll);
#endif /* USE_LOCALE_COLLATE */
-}
-
-#ifndef WIN32 /* No wrapper except on Windows */
-#define my_setlocale(a,b) setlocale(a,b)
+}
-#else /* WIN32 */
+#ifdef WIN32
STATIC char *
-S_my_setlocale(pTHX_ int category, const char* locale)
+S_win32_setlocale(pTHX_ int category, const char* locale)
{
/* This, for Windows, emulates POSIX setlocale() behavior. There is no
- * difference unless the input locale is "", which means on Windows to get
- * the machine default, which is set via the computer's "Regional and
- * Language Options" (or its current equivalent). In POSIX, it instead
- * means to find the locale from the user's environment. This routine
- * looks in the environment, and, if anything is found, uses that instead
- * of going to the machine default. If there is no environment override,
- * the machine default is used, as normal, by calling the real setlocale()
- * with "". The POSIX behavior is to use the LC_ALL variable if set;
- * otherwise to use the particular category's variable if set; otherwise to
- * use the LANG variable. */
+ * difference between the two unless the input locale is "", which normally
+ * means on Windows to get the machine default, which is set via the
+ * computer's "Regional and Language Options" (or its current equivalent).
+ * In POSIX, it instead means to find the locale from the user's
+ * environment. This routine changes the Windows behavior to first look in
+ * the environment, and, if anything is found, use that instead of going to
+ * the machine default. If there is no environment override, the machine
+ * default is used, by calling the real setlocale() with "".
+ *
+ * The POSIX behavior is to use the LC_ALL variable if set; otherwise to
+ * use the particular category's variable if set; otherwise to use the LANG
+ * variable. */
bool override_LC_ALL = FALSE;
char * result;
+ unsigned int i;
if (locale && strEQ(locale, "")) {
-# ifdef LC_ALL
+
+# ifdef LC_ALL
+
locale = PerlEnv_getenv("LC_ALL");
if (! locale) {
-#endif
- switch (category) {
-# ifdef LC_ALL
- case LC_ALL:
- override_LC_ALL = TRUE;
- break; /* We already know its variable isn't set */
-# endif
-# ifdef USE_LOCALE_TIME
- case LC_TIME:
- locale = PerlEnv_getenv("LC_TIME");
- break;
-# endif
-# ifdef USE_LOCALE_CTYPE
- case LC_CTYPE:
- locale = PerlEnv_getenv("LC_CTYPE");
- break;
-# endif
-# ifdef USE_LOCALE_COLLATE
- case LC_COLLATE:
- locale = PerlEnv_getenv("LC_COLLATE");
- break;
-# endif
-# ifdef USE_LOCALE_MONETARY
- case LC_MONETARY:
- locale = PerlEnv_getenv("LC_MONETARY");
- break;
-# endif
-# ifdef USE_LOCALE_NUMERIC
- case LC_NUMERIC:
- locale = PerlEnv_getenv("LC_NUMERIC");
- break;
-# endif
-# ifdef USE_LOCALE_MESSAGES
- case LC_MESSAGES:
- locale = PerlEnv_getenv("LC_MESSAGES");
- break;
-# endif
- default:
- /* This is a category, like PAPER_SIZE that we don't
- * know about; and so can't provide a wrapper. */
- break;
+ if (category == LC_ALL) {
+ override_LC_ALL = TRUE;
}
- if (! locale) {
+ else {
+
+# endif
+
+ for (i = 0; i < NOMINAL_LC_ALL_INDEX; i++) {
+ if (category == categories[i]) {
+ locale = PerlEnv_getenv(category_names[i]);
+ goto found_locale;
+ }
+ }
+
locale = PerlEnv_getenv("LANG");
if (! locale) {
locale = "";
}
+
+ found_locale: ;
+
+# ifdef LC_ALL
+
}
-# ifdef LC_ALL
}
-# endif
+
+# endif
+
}
result = setlocale(category, locale);
* lower priority than the other LC_foo variables, so override it for each
* one that is set. (If they are set to "", it means to use the same thing
* we just set LC_ALL to, so can skip) */
-# ifdef USE_LOCALE_TIME
- result = PerlEnv_getenv("LC_TIME");
- if (result && strNE(result, "")) {
- setlocale(LC_TIME, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_TIME, result, "not captured")));
- }
-# endif
-# ifdef USE_LOCALE_CTYPE
- result = PerlEnv_getenv("LC_CTYPE");
- if (result && strNE(result, "")) {
- setlocale(LC_CTYPE, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_CTYPE, result, "not captured")));
- }
-# endif
-# ifdef USE_LOCALE_COLLATE
- result = PerlEnv_getenv("LC_COLLATE");
- if (result && strNE(result, "")) {
- setlocale(LC_COLLATE, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_COLLATE, result, "not captured")));
- }
-# endif
-# ifdef USE_LOCALE_MONETARY
- result = PerlEnv_getenv("LC_MONETARY");
- if (result && strNE(result, "")) {
- setlocale(LC_MONETARY, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_MONETARY, result, "not captured")));
- }
-# endif
-# ifdef USE_LOCALE_NUMERIC
- result = PerlEnv_getenv("LC_NUMERIC");
- if (result && strNE(result, "")) {
- setlocale(LC_NUMERIC, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_NUMERIC, result, "not captured")));
- }
-# endif
-# ifdef USE_LOCALE_MESSAGES
- result = PerlEnv_getenv("LC_MESSAGES");
- if (result && strNE(result, "")) {
- setlocale(LC_MESSAGES, result);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
- __FILE__, __LINE__,
- setlocale_debug_string(LC_MESSAGES, result, "not captured")));
- }
-# endif
+
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+ result = PerlEnv_getenv(category_names[i]);
+ if (result && strNE(result, "")) {
+ setlocale(categories[i], result);
+ DEBUG_Lv(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
+ __FILE__, __LINE__,
+ setlocale_debug_string(categories[i], result, "not captured")));
+ }
+ }
result = setlocale(LC_ALL, NULL);
DEBUG_L(PerlIO_printf(Perl_debug_log, "%s:%d: %s\n",
/* This wraps POSIX::setlocale() */
char * retval;
+ char * newlocale;
dTHX;
-
#ifdef USE_LOCALE_NUMERIC
- /* A NULL locale means only query what the current one is. We
- * have the LC_NUMERIC name saved, because we are normally switched
- * into the C locale for it. Switch back so an LC_ALL query will yield
- * the correct results; all other categories don't require special
- * handling */
+ /* A NULL locale means only query what the current one is. We have the
+ * LC_NUMERIC name saved, because we are normally switched into the C
+ * locale for it. For an LC_ALL query, switch back to get the correct
+ * results. All other categories don't require special handling */
if (locale == NULL) {
if (category == LC_NUMERIC) {
return savepv(PL_numeric_name);
}
-# ifdef LC_ALL
+# ifdef LC_ALL
+
+ else if (category == LC_ALL && ! PL_numeric_underlying) {
- else if (category == LC_ALL) {
SET_NUMERIC_UNDERLYING();
}
-# endif
+# endif
}
#endif
- retval = my_setlocale(category, locale);
+ /* Save retval since subsequent setlocale() calls may overwrite it. */
+ retval = savepv(do_setlocale_r(category, locale));
DEBUG_L(PerlIO_printf(Perl_debug_log,
"%s:%d: %s\n", __FILE__, __LINE__,
if (locale == 0) {
SET_NUMERIC_STANDARD();
}
+
return NULL;
}
- /* Save retval since subsequent setlocale() calls may overwrite it. */
- retval = savepv(retval);
-
/* If locale == NULL, we are just querying the state, but may have switched
* to NUMERIC_UNDERLYING. Switch back before returning. */
if (locale == NULL) {
SET_NUMERIC_STANDARD();
return retval;
}
- else { /* Now that have switched locales, we have to update our records to
- correspond */
-#ifdef USE_LOCALE_CTYPE
+ /* Now that have switched locales, we have to update our records to
+ * correspond. */
- if ( category == LC_CTYPE
+ switch (category) {
-# ifdef LC_ALL
+#ifdef USE_LOCALE_CTYPE
- || category == LC_ALL
+ case LC_CTYPE:
+ new_ctype(retval);
+ break;
-# endif
+#endif
+#ifdef USE_LOCALE_COLLATE
- )
- {
- char *newctype;
+ case LC_COLLATE:
+ new_collate(retval);
+ break;
-# ifdef LC_ALL
+#endif
+#ifdef USE_LOCALE_NUMERIC
- if (category == LC_ALL) {
- newctype = setlocale(LC_CTYPE, NULL);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log,
- "%s:%d: %s\n", __FILE__, __LINE__,
- setlocale_debug_string(LC_CTYPE, NULL, newctype)));
- }
- else
+ case LC_NUMERIC:
+ new_numeric(retval);
+ break;
-# endif
+#endif
+#ifdef LC_ALL
- newctype = retval;
- new_ctype(newctype);
- }
+ case LC_ALL:
-#endif /* USE_LOCALE_CTYPE */
+ /* LC_ALL updates all the things we care about. The values may not
+ * be the same as 'retval', as the locale "" may have set things
+ * individually */
-#ifdef USE_LOCALE_COLLATE
+# ifdef USE_LOCALE_CTYPE
- if ( category == LC_COLLATE
+ newlocale = do_setlocale_c(LC_CTYPE, NULL);
+ new_ctype(newlocale);
-# ifdef LC_ALL
+# endif /* USE_LOCALE_CTYPE */
+# ifdef USE_LOCALE_COLLATE
- || category == LC_ALL
+ newlocale = do_setlocale_c(LC_COLLATE, NULL);
+ new_collate(newlocale);
-# endif
+# endif
+# ifdef USE_LOCALE_NUMERIC
- )
- {
- char *newcoll;
+ newlocale = do_setlocale_c(LC_NUMERIC, NULL);
+ new_numeric(newlocale);
-# ifdef LC_ALL
+# endif /* USE_LOCALE_NUMERIC */
+#endif /* LC_ALL */
- if (category == LC_ALL) {
- newcoll = setlocale(LC_COLLATE, NULL);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log,
- "%s:%d: %s\n", __FILE__, __LINE__,
- setlocale_debug_string(LC_COLLATE, NULL, newcoll)));
- }
- else
+ default:
+ break;
+ }
-# endif
+ return retval;
+
+
+}
+
+PERL_STATIC_INLINE const char *
+S_save_to_buffer(const char * string, char **buf, Size_t *buf_size, const Size_t offset)
+{
+ /* Copy the NUL-terminated 'string' to 'buf' + 'offset'. 'buf' has size 'buf_size',
+ * growing it if necessary */
+
+ const Size_t string_size = strlen(string) + offset + 1;
+
+ PERL_ARGS_ASSERT_SAVE_TO_BUFFER;
+
+ if (*buf_size == 0) {
+ Newx(*buf, string_size, char);
+ *buf_size = string_size;
+ }
+ else if (string_size > *buf_size) {
+ Renew(*buf, string_size, char);
+ *buf_size = string_size;
+ }
+
+ Copy(string, *buf + offset, string_size - offset, char);
+ return *buf;
+}
+
+/*
+
+=head1 Locale-related functions and macros
+
+=for apidoc Perl_langinfo
+
+This is an (almost ª) drop-in replacement for the system C<L<nl_langinfo(3)>>,
+taking the same C<item> parameter values, and returning the same information.
+But it is more thread-safe than regular C<nl_langinfo()>, and hides the quirks
+of Perl's locale handling from your code, and can be used on systems that lack
+a native C<nl_langinfo>.
+
+Expanding on these:
+
+=over
+
+=item *
+
+It delivers the correct results for the C<RADIXCHAR> and C<THOUSESEP> items,
+without you having to write extra code. The reason for the extra code would be
+because these are from the C<LC_NUMERIC> locale category, which is normally
+kept set to the C locale by Perl, no matter what the underlying locale is
+supposed to be, and so to get the expected results, you have to temporarily
+toggle into the underlying locale, and later toggle back. (You could use
+plain C<nl_langinfo> and C<L</STORE_LC_NUMERIC_FORCE_TO_UNDERLYING>> for this
+but then you wouldn't get the other advantages of C<Perl_langinfo()>; not
+keeping C<LC_NUMERIC> in the C locale would break a lot of CPAN, which is
+expecting the radix (decimal point) character to be a dot.)
+
+=item *
+
+Depending on C<item>, it works on systems that don't have C<nl_langinfo>, hence
+makes your code more portable. Of the fifty-some possible items specified by
+the POSIX 2008 standard,
+L<http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/langinfo.h.html>,
+only two are completely unimplemented. It uses various techniques to recover
+the other items, including calling C<L<localeconv(3)>>, and C<L<strftime(3)>>,
+both of which are specified in C89, so should be always be available. Later
+C<strftime()> versions have additional capabilities; C<""> is returned for
+those not available on your system.
+
+The details for those items which may differ from what this emulation returns
+and what a native C<nl_langinfo()> would return are:
+
+=over
+
+=item C<CODESET>
+
+=item C<ERA>
+
+Unimplemented, so returns C<"">.
+
+=item C<YESEXPR>
+
+=item C<YESSTR>
+
+=item C<NOEXPR>
+
+=item C<NOSTR>
+
+Only the values for English are returned. C<YESSTR> and C<NOSTR> have been
+removed from POSIX 2008, and are retained for backwards compatibility. Your
+platform's C<nl_langinfo> may not support them.
+
+=item C<D_FMT>
+
+Always evaluates to C<%x>, the locale's appropriate date representation.
+
+=item C<T_FMT>
+
+Always evaluates to C<%X>, the locale's appropriate time representation.
+
+=item C<D_T_FMT>
+
+Always evaluates to C<%c>, the locale's appropriate date and time
+representation.
+
+=item C<CRNCYSTR>
+
+The return may be incorrect for those rare locales where the currency symbol
+replaces the radix character.
+Send email to L<mailto:perlbug@perl.org> if you have examples of it needing
+to work differently.
- newcoll = retval;
- new_collate(newcoll);
+=item C<ALT_DIGITS>
+
+Currently this gives the same results as Linux does.
+Send email to L<mailto:perlbug@perl.org> if you have examples of it needing
+to work differently.
+
+=item C<ERA_D_FMT>
+
+=item C<ERA_T_FMT>
+
+=item C<ERA_D_T_FMT>
+
+=item C<T_FMT_AMPM>
+
+These are derived by using C<strftime()>, and not all versions of that function
+know about them. C<""> is returned for these on such systems.
+
+=back
+
+When using C<Perl_langinfo> on systems that don't have a native
+C<nl_langinfo()>, you must
+
+ #include "perl_langinfo.h"
+
+before the C<perl.h> C<#include>. You can replace your C<langinfo.h>
+C<#include> with this one. (Doing it this way keeps out the symbols that plain
+C<langinfo.h> imports into the namespace for code that doesn't need it.)
+
+You also should not use the bare C<langinfo.h> item names, but should preface
+them with C<PERL_>, so use C<PERL_RADIXCHAR> instead of plain C<RADIXCHAR>.
+The C<PERL_I<foo>> versions will also work for this function on systems that do
+have a native C<nl_langinfo>.
+
+=item *
+
+It is thread-friendly, returning its result in a buffer that won't be
+overwritten by another thread, so you don't have to code for that possibility.
+The buffer can be overwritten by the next call to C<nl_langinfo> or
+C<Perl_langinfo> in the same thread.
+
+=item *
+
+ª It returns S<C<const char *>>, whereas plain C<nl_langinfo()> returns S<C<char
+*>>, but you are (only by documentation) forbidden to write into the buffer.
+By declaring this C<const>, the compiler enforces this restriction. The extra
+C<const> is why this isn't an unequivocal drop-in replacement for
+C<nl_langinfo>.
+
+=back
+
+The original impetus for C<Perl_langinfo()> was so that code that needs to
+find out the current currency symbol, floating point radix character, or digit
+grouping separator can use, on all systems, the simpler and more
+thread-friendly C<nl_langinfo> API instead of C<L<localeconv(3)>> which is a
+pain to make thread-friendly. For other fields returned by C<localeconv>, it
+is better to use the methods given in L<perlcall> to call
+L<C<POSIX::localeconv()>|POSIX/localeconv>, which is thread-friendly.
+
+=cut
+
+*/
+
+const char *
+#ifdef HAS_NL_LANGINFO
+Perl_langinfo(const nl_item item)
+#else
+Perl_langinfo(const int item)
+#endif
+{
+ return my_nl_langinfo(item, TRUE);
+}
+
+const char *
+#ifdef HAS_NL_LANGINFO
+S_my_nl_langinfo(const nl_item item, bool toggle)
+#else
+S_my_nl_langinfo(const int item, bool toggle)
+#endif
+{
+ dTHX;
+
+ /* We only need to toggle into the underlying LC_NUMERIC locale for these
+ * two items, and only if not already there */
+ if (toggle && (( item != PERL_RADIXCHAR && item != PERL_THOUSEP)
+ || PL_numeric_underlying))
+ {
+ toggle = FALSE;
+ }
+
+#if defined(HAS_NL_LANGINFO) /* nl_langinfo() is available. */
+#if ! defined(HAS_POSIX_2008_LOCALE)
+
+ /* Here, use plain nl_langinfo(), switching to the underlying LC_NUMERIC
+ * for those items dependent on it. This must be copied to a buffer before
+ * switching back, as some systems destroy the buffer when setlocale() is
+ * called */
+
+ {
+ DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
+
+ if (toggle) {
+ STORE_LC_NUMERIC_FORCE_TO_UNDERLYING();
}
-#endif /* USE_LOCALE_COLLATE */
+ LOCALE_LOCK; /* Prevent interference from another thread executing
+ this code section (the only call to nl_langinfo in
+ the core) */
-#ifdef USE_LOCALE_NUMERIC
+ save_to_buffer(nl_langinfo(item), &PL_langinfo_buf,
+ &PL_langinfo_bufsize, 0);
- if ( category == LC_NUMERIC
+ LOCALE_UNLOCK;
-# ifdef LC_ALL
+ if (toggle) {
+ RESTORE_LC_NUMERIC();
+ }
+ }
- || category == LC_ALL
+# else /* Use nl_langinfo_l(), avoiding both a mutex and changing the locale */
-# endif
+ {
+ bool do_free = FALSE;
+ locale_t cur = uselocale((locale_t) 0);
- )
- {
- char *newnum;
+ if (cur == LC_GLOBAL_LOCALE) {
+ cur = duplocale(LC_GLOBAL_LOCALE);
+ do_free = TRUE;
+ }
-# ifdef LC_ALL
+ if (toggle) {
+ cur = newlocale(LC_NUMERIC_MASK, PL_numeric_name, cur);
+ do_free = TRUE;
+ }
- if (category == LC_ALL) {
- newnum = setlocale(LC_NUMERIC, NULL);
- DEBUG_Lv(PerlIO_printf(Perl_debug_log,
- "%s:%d: %s\n", __FILE__, __LINE__,
- setlocale_debug_string(LC_NUMERIC, NULL, newnum)));
- }
- else
+ save_to_buffer(nl_langinfo_l(item, cur),
+ &PL_langinfo_buf, &PL_langinfo_bufsize, 0);
+ if (do_free) {
+ freelocale(cur);
+ }
+ }
-# endif
+# endif
- newnum = retval;
- new_numeric(newnum);
+ if (strEQ(PL_langinfo_buf, "")) {
+ if (item == PERL_YESSTR) {
+ return "yes";
}
+ if (item == PERL_NOSTR) {
+ return "no";
+ }
+ }
-#endif /* USE_LOCALE_NUMERIC */
+ return PL_langinfo_buf;
+
+#else /* Below, emulate nl_langinfo as best we can */
+
+ {
+
+# ifdef HAS_LOCALECONV
+ const struct lconv* lc;
+ DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
+
+# endif
+# ifdef HAS_STRFTIME
+
+ struct tm tm;
+ bool return_format = FALSE; /* Return the %format, not the value */
+ const char * format;
+
+# endif
+
+ /* We copy the results to a per-thread buffer, even if not
+ * multi-threaded. This is in part to simplify this code, and partly
+ * because we need a buffer anyway for strftime(), and partly because a
+ * call of localeconv() could otherwise wipe out the buffer, and the
+ * programmer would not be expecting this, as this is a nl_langinfo()
+ * substitute after all, so s/he might be thinking their localeconv()
+ * is safe until another localeconv() call. */
+
+ switch (item) {
+ Size_t len;
+ const char * retval;
+
+ /* These 2 are unimplemented */
+ case PERL_CODESET:
+ case PERL_ERA: /* For use with strftime() %E modifier */
+
+ default:
+ return "";
+
+ /* We use only an English set, since we don't know any more */
+ case PERL_YESEXPR: return "^[+1yY]";
+ case PERL_YESSTR: return "yes";
+ case PERL_NOEXPR: return "^[-0nN]";
+ case PERL_NOSTR: return "no";
+
+# ifdef HAS_LOCALECONV
+
+ case PERL_CRNCYSTR:
+
+ /* We don't bother with localeconv_l() because any system that
+ * has it is likely to also have nl_langinfo() */
+
+ LOCALE_LOCK; /* Prevent interference with other threads
+ using localeconv() */
+
+ lc = localeconv();
+ if ( ! lc
+ || ! lc->currency_symbol
+ || strEQ("", lc->currency_symbol))
+ {
+ LOCALE_UNLOCK;
+ return "";
+ }
+
+ /* Leave the first spot empty to be filled in below */
+ save_to_buffer(lc->currency_symbol, &PL_langinfo_buf,
+ &PL_langinfo_bufsize, 1);
+ if (lc->mon_decimal_point && strEQ(lc->mon_decimal_point, ""))
+ { /* khw couldn't figure out how the localedef specifications
+ would show that the $ should replace the radix; this is
+ just a guess as to how it might work.*/
+ *PL_langinfo_buf = '.';
+ }
+ else if (lc->p_cs_precedes) {
+ *PL_langinfo_buf = '-';
+ }
+ else {
+ *PL_langinfo_buf = '+';
+ }
+
+ LOCALE_UNLOCK;
+ break;
+
+ case PERL_RADIXCHAR:
+ case PERL_THOUSEP:
+
+ if (toggle) {
+ STORE_LC_NUMERIC_FORCE_TO_UNDERLYING();
+ }
+
+ LOCALE_LOCK; /* Prevent interference with other threads
+ using localeconv() */
+
+ lc = localeconv();
+ if (! lc) {
+ retval = "";
+ }
+ else {
+ retval = (item == PERL_RADIXCHAR)
+ ? lc->decimal_point
+ : lc->thousands_sep;
+ if (! retval) {
+ retval = "";
+ }
+ }
+
+ save_to_buffer(retval, &PL_langinfo_buf,
+ &PL_langinfo_bufsize, 0);
+
+ LOCALE_UNLOCK;
+
+ if (toggle) {
+ RESTORE_LC_NUMERIC();
+ }
+
+ break;
+
+# endif
+# ifdef HAS_STRFTIME
+
+ /* These are defined by C89, so we assume that strftime supports
+ * them, and so are returned unconditionally; they may not be what
+ * the locale actually says, but should give good enough results
+ * for someone using them as formats (as opposed to trying to parse
+ * them to figure out what the locale says). The other format
+ * items are actually tested to verify they work on the platform */
+ case PERL_D_FMT: return "%x";
+ case PERL_T_FMT: return "%X";
+ case PERL_D_T_FMT: return "%c";
+
+ /* These formats are only available in later strfmtime's */
+ case PERL_ERA_D_FMT: case PERL_ERA_T_FMT: case PERL_ERA_D_T_FMT:
+ case PERL_T_FMT_AMPM:
+
+ /* The rest can be gotten from most versions of strftime(). */
+ case PERL_ABDAY_1: case PERL_ABDAY_2: case PERL_ABDAY_3:
+ case PERL_ABDAY_4: case PERL_ABDAY_5: case PERL_ABDAY_6:
+ case PERL_ABDAY_7:
+ case PERL_ALT_DIGITS:
+ case PERL_AM_STR: case PERL_PM_STR:
+ case PERL_ABMON_1: case PERL_ABMON_2: case PERL_ABMON_3:
+ case PERL_ABMON_4: case PERL_ABMON_5: case PERL_ABMON_6:
+ case PERL_ABMON_7: case PERL_ABMON_8: case PERL_ABMON_9:
+ case PERL_ABMON_10: case PERL_ABMON_11: case PERL_ABMON_12:
+ case PERL_DAY_1: case PERL_DAY_2: case PERL_DAY_3: case PERL_DAY_4:
+ case PERL_DAY_5: case PERL_DAY_6: case PERL_DAY_7:
+ case PERL_MON_1: case PERL_MON_2: case PERL_MON_3: case PERL_MON_4:
+ case PERL_MON_5: case PERL_MON_6: case PERL_MON_7: case PERL_MON_8:
+ case PERL_MON_9: case PERL_MON_10: case PERL_MON_11:
+ case PERL_MON_12:
+
+ LOCALE_LOCK;
+
+ init_tm(&tm); /* Precaution against core dumps */
+ tm.tm_sec = 30;
+ tm.tm_min = 30;
+ tm.tm_hour = 6;
+ tm.tm_year = 2017 - 1900;
+ tm.tm_wday = 0;
+ tm.tm_mon = 0;
+ switch (item) {
+ default:
+ LOCALE_UNLOCK;
+ Perl_croak(aTHX_
+ "panic: %s: %d: switch case: %d problem",
+ __FILE__, __LINE__, item);
+ NOT_REACHED; /* NOTREACHED */
+
+ case PERL_PM_STR: tm.tm_hour = 18;
+ case PERL_AM_STR:
+ format = "%p";
+ break;
+
+ case PERL_ABDAY_7: tm.tm_wday++;
+ case PERL_ABDAY_6: tm.tm_wday++;
+ case PERL_ABDAY_5: tm.tm_wday++;
+ case PERL_ABDAY_4: tm.tm_wday++;
+ case PERL_ABDAY_3: tm.tm_wday++;
+ case PERL_ABDAY_2: tm.tm_wday++;
+ case PERL_ABDAY_1:
+ format = "%a";
+ break;
+
+ case PERL_DAY_7: tm.tm_wday++;
+ case PERL_DAY_6: tm.tm_wday++;
+ case PERL_DAY_5: tm.tm_wday++;
+ case PERL_DAY_4: tm.tm_wday++;
+ case PERL_DAY_3: tm.tm_wday++;
+ case PERL_DAY_2: tm.tm_wday++;
+ case PERL_DAY_1:
+ format = "%A";
+ break;
+
+ case PERL_ABMON_12: tm.tm_mon++;
+ case PERL_ABMON_11: tm.tm_mon++;
+ case PERL_ABMON_10: tm.tm_mon++;
+ case PERL_ABMON_9: tm.tm_mon++;
+ case PERL_ABMON_8: tm.tm_mon++;
+ case PERL_ABMON_7: tm.tm_mon++;
+ case PERL_ABMON_6: tm.tm_mon++;
+ case PERL_ABMON_5: tm.tm_mon++;
+ case PERL_ABMON_4: tm.tm_mon++;
+ case PERL_ABMON_3: tm.tm_mon++;
+ case PERL_ABMON_2: tm.tm_mon++;
+ case PERL_ABMON_1:
+ format = "%b";
+ break;
+
+ case PERL_MON_12: tm.tm_mon++;
+ case PERL_MON_11: tm.tm_mon++;
+ case PERL_MON_10: tm.tm_mon++;
+ case PERL_MON_9: tm.tm_mon++;
+ case PERL_MON_8: tm.tm_mon++;
+ case PERL_MON_7: tm.tm_mon++;
+ case PERL_MON_6: tm.tm_mon++;
+ case PERL_MON_5: tm.tm_mon++;
+ case PERL_MON_4: tm.tm_mon++;
+ case PERL_MON_3: tm.tm_mon++;
+ case PERL_MON_2: tm.tm_mon++;
+ case PERL_MON_1:
+ format = "%B";
+ break;
+
+ case PERL_T_FMT_AMPM:
+ format = "%r";
+ return_format = TRUE;
+ break;
+
+ case PERL_ERA_D_FMT:
+ format = "%Ex";
+ return_format = TRUE;
+ break;
+
+ case PERL_ERA_T_FMT:
+ format = "%EX";
+ return_format = TRUE;
+ break;
+
+ case PERL_ERA_D_T_FMT:
+ format = "%Ec";
+ return_format = TRUE;
+ break;
+
+ case PERL_ALT_DIGITS:
+ tm.tm_wday = 0;
+ format = "%Ow"; /* Find the alternate digit for 0 */
+ break;
+ }
+
+ /* We can't use my_strftime() because it doesn't look at
+ * tm_wday */
+ while (0 == strftime(PL_langinfo_buf, PL_langinfo_bufsize,
+ format, &tm))
+ {
+ /* A zero return means one of:
+ * a) there wasn't enough space in PL_langinfo_buf
+ * b) the format, like a plain %p, returns empty
+ * c) it was an illegal format, though some
+ * implementations of strftime will just return the
+ * illegal format as a plain character sequence.
+ *
+ * To quickly test for case 'b)', try again but precede
+ * the format with a plain character. If that result is
+ * still empty, the problem is either 'a)' or 'c)' */
+
+ Size_t format_size = strlen(format) + 1;
+ Size_t mod_size = format_size + 1;
+ char * mod_format;
+ char * temp_result;
+
+ Newx(mod_format, mod_size, char);
+ Newx(temp_result, PL_langinfo_bufsize, char);
+ *mod_format = ' ';
+ my_strlcpy(mod_format + 1, format, mod_size);
+ len = strftime(temp_result,
+ PL_langinfo_bufsize,
+ mod_format, &tm);
+ Safefree(mod_format);
+ Safefree(temp_result);
+
+ /* If 'len' is non-zero, it means that we had a case like
+ * %p which means the current locale doesn't use a.m. or
+ * p.m., and that is valid */
+ if (len == 0) {
+
+ /* Here, still didn't work. If we get well beyond a
+ * reasonable size, bail out to prevent an infinite
+ * loop. */
+
+ if (PL_langinfo_bufsize > 100 * format_size) {
+ *PL_langinfo_buf = '\0';
+ }
+ else {
+ /* Double the buffer size to retry; Add 1 in case
+ * original was 0, so we aren't stuck at 0. */
+ PL_langinfo_bufsize *= 2;
+ PL_langinfo_bufsize++;
+ Renew(PL_langinfo_buf, PL_langinfo_bufsize, char);
+ continue;
+ }
+ }
+
+ break;
+ }
+
+ /* Here, we got a result.
+ *
+ * If the item is 'ALT_DIGITS', PL_langinfo_buf contains the
+ * alternate format for wday 0. If the value is the same as
+ * the normal 0, there isn't an alternate, so clear the buffer.
+ * */
+ if ( item == PERL_ALT_DIGITS
+ && strEQ(PL_langinfo_buf, "0"))
+ {
+ *PL_langinfo_buf = '\0';
+ }
+
+ /* ALT_DIGITS is problematic. Experiments on it showed that
+ * strftime() did not always work properly when going from
+ * alt-9 to alt-10. Only a few locales have this item defined,
+ * and in all of them on Linux that khw was able to find,
+ * nl_langinfo() merely returned the alt-0 character, possibly
+ * doubled. Most Unicode digits are in blocks of 10
+ * consecutive code points, so that is sufficient information
+ * for those scripts, as we can infer alt-1, alt-2, .... But
+ * for a Japanese locale, a CJK ideographic 0 is returned, and
+ * the CJK digits are not in code point order, so you can't
+ * really infer anything. The localedef for this locale did
+ * specify the succeeding digits, so that strftime() works
+ * properly on them, without needing to infer anything. But
+ * the nl_langinfo() return did not give sufficient information
+ * for the caller to understand what's going on. So until
+ * there is evidence that it should work differently, this
+ * returns the alt-0 string for ALT_DIGITS.
+ *
+ * wday was chosen because its range is all a single digit.
+ * Things like tm_sec have two digits as the minimum: '00' */
+
+ LOCALE_UNLOCK;
+
+ /* If to return the format, not the value, overwrite the buffer
+ * with it. But some strftime()s will keep the original format
+ * if illegal, so change those to "" */
+ if (return_format) {
+ if (strEQ(PL_langinfo_buf, format)) {
+ *PL_langinfo_buf = '\0';
+ }
+ else {
+ save_to_buffer(format, &PL_langinfo_buf,
+ &PL_langinfo_bufsize, 0);
+ }
+ }
+
+ break;
+
+# endif
+
+ }
}
- return retval;
+ return PL_langinfo_buf;
+
+#endif
}
* it. We look at, in order, LC_ALL, LANG, a system default locale (if we
* think there is one), and the ultimate fallback "C". This is all done in
* the same loop as above to avoid duplicating code, but it makes things
- * more complex. After the original failure, we add the fallback
- * possibilities to the list of locales to try, and iterate the loop
- * through them all until one succeeds.
+ * more complex. The 'trial_locales' array is initialized with just one
+ * element; it causes the behavior described in the paragraph above this to
+ * happen. If that fails, we add elements to 'trial_locales', and do extra
+ * loop iterations to cause the behavior described in this paragraph.
*
* On Ultrix, the locale MUST come from the environment, so there is
* preliminary code to set it. I (khw) am not sure that it is necessary,
int ok = 1;
-#if defined(USE_LOCALE)
-#ifdef USE_LOCALE_CTYPE
- char *curctype = NULL;
-#endif /* USE_LOCALE_CTYPE */
-#ifdef USE_LOCALE_COLLATE
- char *curcoll = NULL;
-#endif /* USE_LOCALE_COLLATE */
-#ifdef USE_LOCALE_NUMERIC
- char *curnum = NULL;
-#endif /* USE_LOCALE_NUMERIC */
-#ifdef __GLIBC__
+#ifndef USE_LOCALE
+
+ PERL_UNUSED_ARG(printwarn);
+
+#else /* USE_LOCALE */
+# ifdef __GLIBC__
+
const char * const language = savepv(PerlEnv_getenv("LANGUAGE"));
-#endif
+
+# endif
/* NULL uses the existing already set up locale */
const char * const setlocale_init = (PerlEnv_getenv("PERL_SKIP_LOCALE_INIT"))
const char * const lang = savepv(PerlEnv_getenv("LANG"));
bool setlocale_failure = FALSE;
unsigned int i;
- char *p;
/* A later getenv() could zap this, so only use here */
const char * const bad_lang_use_once = PerlEnv_getenv("PERL_BADLANG");
const bool locwarn = (printwarn > 1
- || (printwarn
- && (! bad_lang_use_once
+ || ( printwarn
+ && ( ! bad_lang_use_once
|| (
- /* disallow with "" or "0" */
- *bad_lang_use_once
- && strNE("0", bad_lang_use_once)))));
- bool done = FALSE;
- char * sl_result; /* return from setlocale() */
- char * locale_param;
-#ifdef WIN32
+ /* disallow with "" or "0" */
+ *bad_lang_use_once
+ && strNE("0", bad_lang_use_once)))));
+
+ /* setlocale() return vals; not copied so must be looked at immediately */
+ const char * sl_result[NOMINAL_LC_ALL_INDEX + 1];
+
+ /* current locale for given category; should have been copied so aren't
+ * volatile */
+ const char * curlocales[NOMINAL_LC_ALL_INDEX + 1];
+
+# ifdef WIN32
+
/* In some systems you can find out the system default locale
* and use that as the fallback locale. */
-# define SYSTEM_DEFAULT_LOCALE
-#endif
-#ifdef SYSTEM_DEFAULT_LOCALE
+# define SYSTEM_DEFAULT_LOCALE
+# endif
+# ifdef SYSTEM_DEFAULT_LOCALE
+
const char *system_default_locale = NULL;
-#endif
-#ifdef DEBUGGING
+# endif
+
+# ifndef DEBUGGING
+# define DEBUG_LOCALE_INIT(a,b,c)
+# else
+
DEBUG_INITIALIZATION_set(cBOOL(PerlEnv_getenv("PERL_DEBUG_LOCALE_INIT")));
-# define DEBUG_LOCALE_INIT(category, locale, result) \
+
+# define DEBUG_LOCALE_INIT(category, locale, result) \
STMT_START { \
if (debug_initialization) { \
PerlIO_printf(Perl_debug_log, \
result)); \
} \
} STMT_END
-#else
-# define DEBUG_LOCALE_INIT(a,b,c)
-#endif
-#ifndef LOCALE_ENVIRON_REQUIRED
- PERL_UNUSED_VAR(done);
- PERL_UNUSED_VAR(locale_param);
-#else
+/* Make sure the parallel arrays are properly set up */
+# ifdef USE_LOCALE_NUMERIC
+ assert(categories[LC_NUMERIC_INDEX] == LC_NUMERIC);
+ assert(strEQ(category_names[LC_NUMERIC_INDEX], "LC_NUMERIC"));
+# endif
+# ifdef USE_LOCALE_CTYPE
+ assert(categories[LC_CTYPE_INDEX] == LC_CTYPE);
+ assert(strEQ(category_names[LC_CTYPE_INDEX], "LC_CTYPE"));
+# endif
+# ifdef USE_LOCALE_COLLATE
+ assert(categories[LC_COLLATE_INDEX] == LC_COLLATE);
+ assert(strEQ(category_names[LC_COLLATE_INDEX], "LC_COLLATE"));
+# endif
+# ifdef USE_LOCALE_TIME
+ assert(categories[LC_TIME_INDEX] == LC_TIME);
+ assert(strEQ(category_names[LC_TIME_INDEX], "LC_TIME"));
+# endif
+# ifdef USE_LOCALE_MESSAGES
+ assert(categories[LC_MESSAGES_INDEX] == LC_MESSAGES);
+ assert(strEQ(category_names[LC_MESSAGES_INDEX], "LC_MESSAGES"));
+# endif
+# ifdef USE_LOCALE_MONETARY
+ assert(categories[LC_MONETARY_INDEX] == LC_MONETARY);
+ assert(strEQ(category_names[LC_MONETARY_INDEX], "LC_MONETARY"));
+# endif
+# ifdef USE_LOCALE_ADDRESS
+ assert(categories[LC_ADDRESS_INDEX] == LC_ADDRESS);
+ assert(strEQ(category_names[LC_ADDRESS_INDEX], "LC_ADDRESS"));
+# endif
+# ifdef USE_LOCALE_IDENTIFICATION
+ assert(categories[LC_IDENTIFICATION_INDEX] == LC_IDENTIFICATION);
+ assert(strEQ(category_names[LC_IDENTIFICATION_INDEX], "LC_IDENTIFICATION"));
+# endif
+# ifdef USE_LOCALE_MEASUREMENT
+ assert(categories[LC_MEASUREMENT_INDEX] == LC_MEASUREMENT);
+ assert(strEQ(category_names[LC_MEASUREMENT_INDEX], "LC_MEASUREMENT"));
+# endif
+# ifdef USE_LOCALE_PAPER
+ assert(categories[LC_PAPER_INDEX] == LC_PAPER);
+ assert(strEQ(category_names[LC_PAPER_INDEX], "LC_PAPER"));
+# endif
+# ifdef USE_LOCALE_TELEPHONE
+ assert(categories[LC_TELEPHONE_INDEX] == LC_TELEPHONE);
+ assert(strEQ(category_names[LC_TELEPHONE_INDEX], "LC_TELEPHONE"));
+# endif
+# ifdef LC_ALL
+ assert(categories[LC_ALL_INDEX] == LC_ALL);
+ assert(strEQ(category_names[LC_ALL_INDEX], "LC_ALL"));
+ assert(NOMINAL_LC_ALL_INDEX == LC_ALL_INDEX);
+# endif
+# endif /* DEBUGGING */
+
+ /* Initialize the cache of the program's UTF-8ness for the always known
+ * locales C and POSIX */
+ my_strlcpy(PL_locale_utf8ness, C_and_POSIX_utf8ness,
+ sizeof(PL_locale_utf8ness));
+
+# ifdef LOCALE_ENVIRON_REQUIRED
/*
* Ultrix setlocale(..., "") fails if there are no environment
* variables from which to get a locale name.
*/
-# ifdef LC_ALL
- if (lang) {
- sl_result = my_setlocale(LC_ALL, setlocale_init);
- DEBUG_LOCALE_INIT(LC_ALL, setlocale_init, sl_result);
- if (sl_result)
- done = TRUE;
- else
- setlocale_failure = TRUE;
- }
- if (! setlocale_failure) {
-# ifdef USE_LOCALE_CTYPE
- locale_param = (! done && (lang || PerlEnv_getenv("LC_CTYPE")))
- ? setlocale_init
- : NULL;
- curctype = my_setlocale(LC_CTYPE, locale_param);
- DEBUG_LOCALE_INIT(LC_CTYPE, locale_param, sl_result);
- if (! curctype)
- setlocale_failure = TRUE;
- else
- curctype = savepv(curctype);
-# endif /* USE_LOCALE_CTYPE */
-# ifdef USE_LOCALE_COLLATE
- locale_param = (! done && (lang || PerlEnv_getenv("LC_COLLATE")))
- ? setlocale_init
- : NULL;
- curcoll = my_setlocale(LC_COLLATE, locale_param);
- DEBUG_LOCALE_INIT(LC_COLLATE, locale_param, sl_result);
- if (! curcoll)
- setlocale_failure = TRUE;
- else
- curcoll = savepv(curcoll);
-# endif /* USE_LOCALE_COLLATE */
-# ifdef USE_LOCALE_NUMERIC
- locale_param = (! done && (lang || PerlEnv_getenv("LC_NUMERIC")))
- ? setlocale_init
- : NULL;
- curnum = my_setlocale(LC_NUMERIC, locale_param);
- DEBUG_LOCALE_INIT(LC_NUMERIC, locale_param, sl_result);
- if (! curnum)
- setlocale_failure = TRUE;
- else
- curnum = savepv(curnum);
-# endif /* USE_LOCALE_NUMERIC */
-# ifdef USE_LOCALE_MESSAGES
- locale_param = (! done && (lang || PerlEnv_getenv("LC_MESSAGES")))
- ? setlocale_init
- : NULL;
- sl_result = my_setlocale(LC_MESSAGES, locale_param);
- DEBUG_LOCALE_INIT(LC_MESSAGES, locale_param, sl_result);
- if (! sl_result) {
- setlocale_failure = TRUE;
- }
-# endif /* USE_LOCALE_MESSAGES */
-# ifdef USE_LOCALE_MONETARY
- locale_param = (! done && (lang || PerlEnv_getenv("LC_MONETARY")))
- ? setlocale_init
- : NULL;
- sl_result = my_setlocale(LC_MONETARY, locale_param);
- DEBUG_LOCALE_INIT(LC_MONETARY, locale_param, sl_result);
- if (! sl_result) {
- setlocale_failure = TRUE;
- }
-# endif /* USE_LOCALE_MONETARY */
- }
-
-# endif /* LC_ALL */
-
-#endif /* !LOCALE_ENVIRON_REQUIRED */
+# ifndef LC_ALL
+# error Ultrix without LC_ALL not implemented
+# else
+
+ {
+ bool done = FALSE;
+ if (lang) {
+ sl_result[LC_ALL_INDEX] = do_setlocale_c(LC_ALL, setlocale_init);
+ DEBUG_LOCALE_INIT(LC_ALL, setlocale_init, sl_result[LC_ALL_INDEX]);
+ if (sl_result[LC_ALL_INDEX])
+ done = TRUE;
+ else
+ setlocale_failure = TRUE;
+ }
+ if (! setlocale_failure) {
+ const char * locale_param;
+ for (i = 0; i < LC_ALL_INDEX; i++) {
+ locale_param = (! done && (lang || PerlEnv_getenv(category_names[i])))
+ ? setlocale_init
+ : NULL;
+ sl_result[i] = do_setlocale_r(categories[i], locale_param);
+ if (! sl_result[i]) {
+ setlocale_failure = TRUE;
+ }
+ DEBUG_LOCALE_INIT(categories[i], locale_param, sl_result[i]);
+ }
+ }
+ }
+
+# endif /* LC_ALL */
+# endif /* LOCALE_ENVIRON_REQUIRED */
/* We try each locale in the list until we get one that works, or exhaust
* the list. Normally the loop is executed just once. But if setting the
* will execute the loop multiple times */
trial_locales[0] = setlocale_init;
trial_locales_count = 1;
+
for (i= 0; i < trial_locales_count; i++) {
const char * trial_locale = trial_locales[i];
* sense */
setlocale_failure = FALSE;
-#ifdef SYSTEM_DEFAULT_LOCALE
-# ifdef WIN32
+# ifdef SYSTEM_DEFAULT_LOCALE
+# ifdef WIN32 /* Note that assumes Win32 has LC_ALL */
+
/* On Windows machines, an entry of "" after the 0th means to use
* the system default locale, which we now proceed to get. */
if (strEQ(trial_locale, "")) {
/* Note that this may change the locale, but we are going to do
* that anyway just below */
- system_default_locale = setlocale(LC_ALL, "");
+ system_default_locale = do_setlocale_c(LC_ALL, "");
DEBUG_LOCALE_INIT(LC_ALL, "", system_default_locale);
- /* Skip if invalid or it's already on the list of locales to
+ /* Skip if invalid or if it's already on the list of locales to
* try */
if (! system_default_locale) {
goto next_iteration;
trial_locale = system_default_locale;
}
-# endif /* WIN32 */
-#endif /* SYSTEM_DEFAULT_LOCALE */
- }
+# else
+# error SYSTEM_DEFAULT_LOCALE only implemented for Win32
+# endif
+# endif /* SYSTEM_DEFAULT_LOCALE */
-#ifdef LC_ALL
- sl_result = my_setlocale(LC_ALL, trial_locale);
- DEBUG_LOCALE_INIT(LC_ALL, trial_locale, sl_result);
- if (! sl_result) {
+ } /* For i > 0 */
+
+# ifdef LC_ALL
+
+ sl_result[LC_ALL_INDEX] = do_setlocale_c(LC_ALL, trial_locale);
+ DEBUG_LOCALE_INIT(LC_ALL, trial_locale, sl_result[LC_ALL_INDEX]);
+ if (! sl_result[LC_ALL_INDEX]) {
setlocale_failure = TRUE;
}
else {
* setlocales below just return their category's current values.
* This adequately handles the case in NetBSD where LC_COLLATE may
* not be defined for a locale, and setting it individually will
- * fail, whereas setting LC_ALL suceeds, leaving LC_COLLATE set to
+ * fail, whereas setting LC_ALL succeeds, leaving LC_COLLATE set to
* the POSIX locale. */
trial_locale = NULL;
}
-#endif /* LC_ALL */
- if (!setlocale_failure) {
-#ifdef USE_LOCALE_CTYPE
- Safefree(curctype);
- curctype = my_setlocale(LC_CTYPE, trial_locale);
- DEBUG_LOCALE_INIT(LC_CTYPE, trial_locale, curctype);
- if (! curctype)
- setlocale_failure = TRUE;
- else
- curctype = savepv(curctype);
-#endif /* USE_LOCALE_CTYPE */
-#ifdef USE_LOCALE_COLLATE
- Safefree(curcoll);
- curcoll = my_setlocale(LC_COLLATE, trial_locale);
- DEBUG_LOCALE_INIT(LC_COLLATE, trial_locale, curcoll);
- if (! curcoll)
- setlocale_failure = TRUE;
- else
- curcoll = savepv(curcoll);
-#endif /* USE_LOCALE_COLLATE */
-#ifdef USE_LOCALE_NUMERIC
- Safefree(curnum);
- curnum = my_setlocale(LC_NUMERIC, trial_locale);
- DEBUG_LOCALE_INIT(LC_NUMERIC, trial_locale, curnum);
- if (! curnum)
- setlocale_failure = TRUE;
- else
- curnum = savepv(curnum);
-#endif /* USE_LOCALE_NUMERIC */
-#ifdef USE_LOCALE_MESSAGES
- sl_result = my_setlocale(LC_MESSAGES, trial_locale);
- DEBUG_LOCALE_INIT(LC_MESSAGES, trial_locale, sl_result);
- if (! (sl_result))
- setlocale_failure = TRUE;
-#endif /* USE_LOCALE_MESSAGES */
-#ifdef USE_LOCALE_MONETARY
- sl_result = my_setlocale(LC_MONETARY, trial_locale);
- DEBUG_LOCALE_INIT(LC_MONETARY, trial_locale, sl_result);
- if (! (sl_result))
- setlocale_failure = TRUE;
-#endif /* USE_LOCALE_MONETARY */
+# endif /* LC_ALL */
- if (! setlocale_failure) { /* Success */
- break;
+ if (! setlocale_failure) {
+ unsigned int j;
+ for (j = 0; j < NOMINAL_LC_ALL_INDEX; j++) {
+ curlocales[j]
+ = savepv(do_setlocale_r(categories[j], trial_locale));
+ if (! curlocales[j]) {
+ setlocale_failure = TRUE;
+ }
+ DEBUG_LOCALE_INIT(categories[j], trial_locale, curlocales[j]);
+ }
+
+ if (! setlocale_failure) { /* All succeeded */
+ break; /* Exit trial_locales loop */
}
}
unsigned int j;
if (locwarn) { /* Output failure info only on the first one */
-#ifdef LC_ALL
+
+# ifdef LC_ALL
PerlIO_printf(Perl_error_log,
"perl: warning: Setting locale failed.\n");
-#else /* !LC_ALL */
+# else /* !LC_ALL */
PerlIO_printf(Perl_error_log,
"perl: warning: Setting locale failed for the categories:\n\t");
-# ifdef USE_LOCALE_CTYPE
- if (! curctype)
- PerlIO_printf(Perl_error_log, "LC_CTYPE ");
-# endif /* USE_LOCALE_CTYPE */
-# ifdef USE_LOCALE_COLLATE
- if (! curcoll)
- PerlIO_printf(Perl_error_log, "LC_COLLATE ");
-# endif /* USE_LOCALE_COLLATE */
-# ifdef USE_LOCALE_NUMERIC
- if (! curnum)
- PerlIO_printf(Perl_error_log, "LC_NUMERIC ");
-# endif /* USE_LOCALE_NUMERIC */
- PerlIO_printf(Perl_error_log, "and possibly others\n");
-#endif /* LC_ALL */
+ for (j = 0; j < NOMINAL_LC_ALL_INDEX; j++) {
+ if (! curlocales[j]) {
+ PerlIO_printf(Perl_error_log, category_names[j]);
+ }
+ else {
+ Safefree(curlocales[j]);
+ }
+ }
+
+# endif /* LC_ALL */
PerlIO_printf(Perl_error_log,
"perl: warning: Please check that your locale settings:\n");
-#ifdef __GLIBC__
+# ifdef __GLIBC__
+
PerlIO_printf(Perl_error_log,
"\tLANGUAGE = %c%s%c,\n",
language ? '"' : '(',
language ? language : "unset",
language ? '"' : ')');
-#endif
+# endif
PerlIO_printf(Perl_error_log,
"\tLC_ALL = %c%s%c,\n",
lc_all ? lc_all : "unset",
lc_all ? '"' : ')');
-#if defined(USE_ENVIRON_ARRAY)
+# if defined(USE_ENVIRON_ARRAY)
+
{
- char **e;
- for (e = environ; *e; e++) {
- if (strEQs(*e, "LC_")
- && strNEs(*e, "LC_ALL=")
- && (p = strchr(*e, '=')))
- PerlIO_printf(Perl_error_log, "\t%.*s = \"%s\",\n",
- (int)(p - *e), *e, p + 1);
- }
+ char **e;
+
+ /* Look through the environment for any variables of the
+ * form qr/ ^ LC_ [A-Z]+ = /x, except LC_ALL which was
+ * already handled above. These are assumed to be locale
+ * settings. Output them and their values. */
+ for (e = environ; *e; e++) {
+ const STRLEN prefix_len = sizeof("LC_") - 1;
+ STRLEN uppers_len;
+
+ if ( strBEGINs(*e, "LC_")
+ && ! strBEGINs(*e, "LC_ALL=")
+ && (uppers_len = strspn(*e + prefix_len,
+ "ABCDEFGHIJKLMNOPQRSTUVWXYZ"))
+ && ((*e)[prefix_len + uppers_len] == '='))
+ {
+ PerlIO_printf(Perl_error_log, "\t%.*s = \"%s\",\n",
+ (int) (prefix_len + uppers_len), *e,
+ *e + prefix_len + uppers_len + 1);
+ }
+ }
}
-#else
+
+# else
+
PerlIO_printf(Perl_error_log,
"\t(possibly more locale environment variables)\n");
-#endif
+
+# endif
PerlIO_printf(Perl_error_log,
"\tLANG = %c%s%c\n",
}
done_lang:
-#if defined(WIN32) && defined(LC_ALL)
+# if defined(WIN32) && defined(LC_ALL)
+
/* For Windows, we also try the system default locale before "C".
* (If there exists a Windows without LC_ALL we skip this because
* it gets too complicated. For those, the "C" is the next
* the array, but the code at the loop above knows to treat it
* differently when not the 0th */
trial_locales[trial_locales_count++] = "";
-#endif
+
+# endif
for (j = 0; j < trial_locales_count; j++) {
if (strEQ("C", trial_locales[j])) {
done_C: ;
} /* end of first time through the loop */
-#ifdef WIN32
+# ifdef WIN32
+
next_iteration: ;
-#endif
+
+# endif
} /* end of looping through the trial locales */
msg = "Falling back to";
}
else { /* fallback failed */
+ unsigned int j;
/* We dropped off the end of the loop, so have to decrement i to
* get back to the value the last time through */
msg = "Failed to fall back to";
/* To continue, we should use whatever values we've got */
-#ifdef USE_LOCALE_CTYPE
- Safefree(curctype);
- curctype = savepv(setlocale(LC_CTYPE, NULL));
- DEBUG_LOCALE_INIT(LC_CTYPE, NULL, curctype);
-#endif /* USE_LOCALE_CTYPE */
-#ifdef USE_LOCALE_COLLATE
- Safefree(curcoll);
- curcoll = savepv(setlocale(LC_COLLATE, NULL));
- DEBUG_LOCALE_INIT(LC_COLLATE, NULL, curcoll);
-#endif /* USE_LOCALE_COLLATE */
-#ifdef USE_LOCALE_NUMERIC
- Safefree(curnum);
- curnum = savepv(setlocale(LC_NUMERIC, NULL));
- DEBUG_LOCALE_INIT(LC_NUMERIC, NULL, curnum);
-#endif /* USE_LOCALE_NUMERIC */
+
+ for (j = 0; j < NOMINAL_LC_ALL_INDEX; j++) {
+ Safefree(curlocales[j]);
+ curlocales[j] = savepv(do_setlocale_r(categories[j], NULL));
+ DEBUG_LOCALE_INIT(categories[j], NULL, curlocales[j]);
+ }
}
if (locwarn) {
description = "the standard locale";
name = "C";
}
-#ifdef SYSTEM_DEFAULT_LOCALE
+
+# ifdef SYSTEM_DEFAULT_LOCALE
+
else if (strEQ(trial_locales[i], "")) {
description = "the system default locale";
if (system_default_locale) {
name = system_default_locale;
}
}
-#endif /* SYSTEM_DEFAULT_LOCALE */
+
+# endif /* SYSTEM_DEFAULT_LOCALE */
+
else {
description = "a fallback locale";
name = trial_locales[i];
}
} /* End of tried to fallback */
-#ifdef USE_LOCALE_CTYPE
- new_ctype(curctype);
-#endif /* USE_LOCALE_CTYPE */
+ /* Done with finding the locales; update our records */
-#ifdef USE_LOCALE_COLLATE
- new_collate(curcoll);
-#endif /* USE_LOCALE_COLLATE */
+# ifdef USE_LOCALE_CTYPE
-#ifdef USE_LOCALE_NUMERIC
- new_numeric(curnum);
-#endif /* USE_LOCALE_NUMERIC */
+ new_ctype(curlocales[LC_CTYPE_INDEX]);
+
+# endif
+# ifdef USE_LOCALE_COLLATE
+
+ new_collate(curlocales[LC_COLLATE_INDEX]);
+
+# endif
+# ifdef USE_LOCALE_NUMERIC
+
+ new_numeric(curlocales[LC_NUMERIC_INDEX]);
+
+# endif
+
+ for (i = 0; i < NOMINAL_LC_ALL_INDEX; i++) {
+
+# if defined(USE_ITHREADS)
+
+ /* This caches whether each category's locale is UTF-8 or not. This
+ * may involve changing the locale. It is ok to do this at
+ * initialization time before any threads have started, but not later.
+ * Caching means that if the program heeds our dictate not to change
+ * locales in threaded applications, this data will remain valid, and
+ * it may get queried without changing locales. If the environment is
+ * such that all categories have the same locale, this isn't needed, as
+ * the code will not change the locale; but this handles the uncommon
+ * case where the environment has disparate locales for the categories
+ * */
+ (void) _is_cur_LC_category_utf8(categories[i]);
+
+# endif
+
+ Safefree(curlocales[i]);
+ }
+
+# if defined(USE_PERLIO) && defined(USE_LOCALE_CTYPE)
-#if defined(USE_PERLIO) && defined(USE_LOCALE_CTYPE)
/* Set PL_utf8locale to TRUE if using PerlIO _and_ the current LC_CTYPE
- * locale is UTF-8. If PL_utf8locale and PL_unicode (set by -C or by
- * $ENV{PERL_UNICODE}) are true, perl.c:S_parse_body() will turn on the
- * PerlIO :utf8 layer on STDIN, STDOUT, STDERR, _and_ the default open
- * discipline. */
- PL_utf8locale = _is_cur_LC_category_utf8(LC_CTYPE);
+ * locale is UTF-8. The call to new_ctype() just above has already
+ * calculated the latter value and saved it in PL_in_utf8_CTYPE_locale. If
+ * both PL_utf8locale and PL_unicode (set by -C or by $ENV{PERL_UNICODE})
+ * are true, perl.c:S_parse_body() will turn on the PerlIO :utf8 layer on
+ * STDIN, STDOUT, STDERR, _and_ the default open discipline. */
+ PL_utf8locale = PL_in_utf8_CTYPE_locale;
/* Set PL_unicode to $ENV{PERL_UNICODE} if using PerlIO.
This is an alternative to using the -C command line switch
if (PL_unicode & PERL_UNICODE_UTF8CACHEASSERT_FLAG)
PL_utf8cache = -1;
}
-#endif
-#ifdef USE_LOCALE_CTYPE
- Safefree(curctype);
-#endif /* USE_LOCALE_CTYPE */
-#ifdef USE_LOCALE_COLLATE
- Safefree(curcoll);
-#endif /* USE_LOCALE_COLLATE */
-#ifdef USE_LOCALE_NUMERIC
- Safefree(curnum);
-#endif /* USE_LOCALE_NUMERIC */
+# endif
+# ifdef __GLIBC__
-#ifdef __GLIBC__
Safefree(language);
-#endif
+
+# endif
Safefree(lc_all);
Safefree(lang);
-#else /* !USE_LOCALE */
- PERL_UNUSED_ARG(printwarn);
#endif /* USE_LOCALE */
-
#ifdef DEBUGGING
+
/* So won't continue to output stuff */
DEBUG_INITIALIZATION_set(FALSE);
+
#endif
return ok;
* otherwise contain that character, but otherwise there may be
* less-than-perfect results with that character and NUL. This is
* unavoidable unless we replace strxfrm with our own implementation. */
- if (s_strlen < len) { /* Only execute if there is an embedded NUL */
+ if (UNLIKELY(s_strlen < len)) { /* Only execute if there is an embedded
+ NUL */
char * e = s + len;
char * sans_nuls;
STRLEN sans_nuls_len;
- STRLEN sans_nuls_pos;
int try_non_controls;
char this_replacement_char[] = "?\0"; /* Room for a two-byte string,
making sure 2nd byte is NUL.
} /* End of determining the character that is to replace NULs */
/* If the replacement is variant under UTF-8, it must match the
- * UTF8-ness as the original */
+ * UTF8-ness of the original */
if ( ! UVCHR_IS_INVARIANT(PL_strxfrm_NUL_replacement) && utf8) {
this_replacement_char[0] =
UTF8_EIGHT_BIT_HI(PL_strxfrm_NUL_replacement);
sans_nuls_len = (len * this_replacement_len) + 1;
Newx(sans_nuls, sans_nuls_len, char);
*sans_nuls = '\0';
- sans_nuls_pos = 0;
/* Replace each NUL with the lowest collating control. Loop until have
* exhausted all the NULs */
while (s + s_strlen < e) {
- sans_nuls_pos = my_strlcat(sans_nuls + sans_nuls_pos,
- s,
- sans_nuls_len);
+ my_strlcat(sans_nuls, s, sans_nuls_len);
/* Do the actual replacement */
- sans_nuls_pos = my_strlcat(sans_nuls + sans_nuls_pos,
- this_replacement_char,
- sans_nuls_len);
+ my_strlcat(sans_nuls, this_replacement_char, sans_nuls_len);
/* Move past the input NUL */
s += s_strlen + 1;
}
/* And add anything that trails the final NUL */
- my_strlcat(sans_nuls + sans_nuls_pos, s, sans_nuls_len);
+ my_strlcat(sans_nuls, s, sans_nuls_len);
/* Switch so below we transform this modified string */
s = sans_nuls;
* length 1 strings, as we can't be sure that it's a real slope
* change */
if (length_in_chars > 1 && new_m > PL_collxfrm_mult) {
-#ifdef DEBUGGING
+
+# ifdef DEBUGGING
+
STRLEN old_m = PL_collxfrm_mult;
STRLEN old_b = PL_collxfrm_base;
-#endif
+
+# endif
+
PL_collxfrm_mult = new_m;
PL_collxfrm_base = 1; /* +1 For trailing NUL */
computed_guess = PL_collxfrm_base
xAlloc += (xAlloc / 4) + 1;
PL_strxfrm_is_behaved = FALSE;
-#ifdef DEBUGGING
+# ifdef DEBUGGING
+
if (DEBUG_Lv_TEST || debug_initialization) {
PerlIO_printf(Perl_debug_log,
"_mem_collxfrm required more space than previously calculated"
PL_collation_name, (int) COLLXFRM_HDR_LEN,
xAlloc - COLLXFRM_HDR_LEN);
}
-#endif
+
+# endif
+
}
Renew(xbuf, xAlloc, char);
}
-#ifdef DEBUGGING
+# ifdef DEBUGGING
+
if (DEBUG_Lv_TEST || debug_initialization) {
print_collxfrm_input_and_return(s, s + len, xlen, utf8);
_byte_dump_string((U8 *) xbuf + COLLXFRM_HDR_LEN,
*xlen, 1));
}
-#endif
+
+# endif
/* Free up unneeded space; retain ehough for trailing NUL */
Renew(xbuf, COLLXFRM_HDR_LEN + *xlen + 1, char);
Safefree(s);
}
*xlen = 0;
-#ifdef DEBUGGING
+
+# ifdef DEBUGGING
+
if (DEBUG_Lv_TEST || debug_initialization) {
print_collxfrm_input_and_return(s, s + len, NULL, utf8);
}
-#endif
+
+# endif
+
return NULL;
}
-#ifdef DEBUGGING
+# ifdef DEBUGGING
STATIC void
S_print_collxfrm_input_and_return(pTHX_
PerlIO_printf(Perl_debug_log, "_mem_collxfrm[%" UVuf "]: returning ",
(UV)PL_collation_ix);
if (xlen) {
- PerlIO_printf(Perl_debug_log, "%" UVuf, (UV) *xlen);
+ PerlIO_printf(Perl_debug_log, "%zu", *xlen);
}
else {
PerlIO_printf(Perl_debug_log, "NULL");
}
}
-#endif /* #ifdef DEBUGGING */
-
+# endif /* #ifdef DEBUGGING */
#endif /* USE_LOCALE_COLLATE */
#ifdef USE_LOCALE
* English, it comes down to if the locale's name ends in something like
* "UTF-8". It errs on the side of not being a UTF-8 locale. */
- char *save_input_locale = NULL;
+ /* Name of current locale corresponding to the input category */
+ const char *save_input_locale = NULL;
+
+ bool is_utf8 = FALSE; /* The return value */
STRLEN final_pos;
-#ifdef LC_ALL
+ /* The variables below are for the cache of previous lookups using this
+ * function. The cache is a C string, described at the definition for
+ * 'C_and_POSIX_utf8ness'.
+ *
+ * The first part of the cache is fixed, for the C and POSIX locales. The
+ * varying part starts just after them. */
+ char * utf8ness_cache = PL_locale_utf8ness + STRLENs(C_and_POSIX_utf8ness);
+
+ Size_t utf8ness_cache_size; /* Size of the varying portion */
+ Size_t input_name_len; /* Length in bytes of save_input_locale */
+ Size_t input_name_len_with_overhead; /* plus extra chars used to store
+ the name in the cache */
+ char * delimited; /* The name plus the delimiters used to store
+ it in the cache */
+ char * name_pos; /* position of 'delimited' in the cache, or 0
+ if not there */
+
+
+# ifdef LC_ALL
+
assert(category != LC_ALL);
-#endif
- /* First dispose of the trivial cases */
- save_input_locale = setlocale(category, NULL);
+# endif
+
+ /* Get the desired category's locale */
+ save_input_locale = do_setlocale_r(category, NULL);
if (! save_input_locale) {
- DEBUG_L(PerlIO_printf(Perl_debug_log,
- "Could not find current locale for category %d\n",
- category));
- return FALSE; /* XXX maybe should croak */
+ Perl_croak(aTHX_
+ "panic: %s: %d: Could not find current locale for %s\n",
+ __FILE__, __LINE__, category_name(category));
}
+
save_input_locale = stdize_locale(savepv(save_input_locale));
- if (isNAME_C_OR_POSIX(save_input_locale)) {
- DEBUG_L(PerlIO_printf(Perl_debug_log,
- "Current locale for category %d is %s\n",
- category, save_input_locale));
+ DEBUG_L(PerlIO_printf(Perl_debug_log,
+ "Current locale for %s is %s\n",
+ category_name(category), save_input_locale));
+
+ input_name_len = strlen(save_input_locale);
+
+ /* In our cache, each name is accompanied by two delimiters and a single
+ * utf8ness digit */
+ input_name_len_with_overhead = input_name_len + 3;
+
+ /* Allocate and populate space for a copy of the name surrounded by the
+ * delimiters */
+ Newx(delimited, input_name_len_with_overhead, char);
+ delimited[0] = UTF8NESS_SEP[0];
+ Copy(save_input_locale, delimited + 1, input_name_len, char);
+ delimited[input_name_len+1] = UTF8NESS_PREFIX[0];
+ delimited[input_name_len+2] = '\0';
+
+ /* And see if that is in the cache */
+ name_pos = instr(PL_locale_utf8ness, delimited);
+ if (name_pos) {
+ is_utf8 = *(name_pos + input_name_len_with_overhead - 1) - '0';
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log, "UTF8ness for locale %s=%d, \n",
+ save_input_locale, is_utf8);
+ }
+
+# endif
+
+ /* And, if not already in that position, move it to the beginning of
+ * the non-constant portion of the list, since it is the most recently
+ * used. (We don't have to worry about overflow, since just moving
+ * existing names around) */
+ if (name_pos > utf8ness_cache) {
+ Move(utf8ness_cache,
+ utf8ness_cache + input_name_len_with_overhead,
+ name_pos - utf8ness_cache, char);
+ Copy(delimited,
+ utf8ness_cache,
+ input_name_len_with_overhead - 1, char);
+ utf8ness_cache[input_name_len_with_overhead - 1] = is_utf8 + '0';
+ }
+
+ Safefree(delimited);
Safefree(save_input_locale);
- return FALSE;
+ return is_utf8;
}
-#if defined(USE_LOCALE_CTYPE) \
+ /* Here we don't have stored the utf8ness for the input locale. We have to
+ * calculate it */
+
+# if defined(USE_LOCALE_CTYPE) \
&& (defined(MB_CUR_MAX) || (defined(HAS_NL_LANGINFO) && defined(CODESET)))
{ /* Next try nl_langinfo or MB_CUR_MAX if available */
char *save_ctype_locale = NULL;
- bool is_utf8;
if (category != LC_CTYPE) { /* These work only on LC_CTYPE */
/* Get the current LC_CTYPE locale */
- save_ctype_locale = setlocale(LC_CTYPE, NULL);
+ save_ctype_locale = do_setlocale_c(LC_CTYPE, NULL);
if (! save_ctype_locale) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not find current locale for LC_CTYPE\n"));
Safefree(save_ctype_locale);
save_ctype_locale = NULL;
}
- else if (! setlocale(LC_CTYPE, save_input_locale)) {
+ else if (! do_setlocale_c(LC_CTYPE, save_input_locale)) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not change LC_CTYPE locale to %s\n",
save_input_locale));
* information is desired. This means that nl_langinfo() and MB_CUR_MAX
* should give the correct results */
-# if defined(HAS_NL_LANGINFO) && defined(CODESET)
- {
- char *codeset = nl_langinfo(CODESET);
- if (codeset && strNE(codeset, "")) {
- codeset = savepv(codeset);
+# if defined(HAS_NL_LANGINFO) && defined(CODESET)
+
+ { /* The task is easiest if the platform has this POSIX 2001 function */
+ const char *codeset = my_nl_langinfo(PERL_CODESET, FALSE);
+ /* FALSE => already in dest locale */
+
+ DEBUG_L(PerlIO_printf(Perl_debug_log,
+ "\tnllanginfo returned CODESET '%s'\n", codeset));
+ if (codeset && strNE(codeset, "")) {
/* If we switched LC_CTYPE, switch back */
if (save_ctype_locale) {
- setlocale(LC_CTYPE, save_ctype_locale);
+ do_setlocale_c(LC_CTYPE, save_ctype_locale);
Safefree(save_ctype_locale);
}
- is_utf8 = foldEQ(codeset, STR_WITH_LEN("UTF-8"))
- || foldEQ(codeset, STR_WITH_LEN("UTF8"));
+ /* If the implementation of foldEQ() somehow were
+ * to change to not go byte-by-byte, this could
+ * read past end of string, as only one length is
+ * checked. But currently, a premature NUL will
+ * compare false, and it will stop there */
+ is_utf8 = cBOOL( foldEQ(codeset, STR_WITH_LEN("UTF-8"))
+ || foldEQ(codeset, STR_WITH_LEN("UTF8")));
DEBUG_L(PerlIO_printf(Perl_debug_log,
"\tnllanginfo returned CODESET '%s'; ?UTF8 locale=%d\n",
codeset, is_utf8));
- Safefree(codeset);
- Safefree(save_input_locale);
- return is_utf8;
+ goto finish_and_return;
}
}
-# endif
-# ifdef MB_CUR_MAX
+# endif
+# ifdef MB_CUR_MAX
/* Here, either we don't have nl_langinfo, or it didn't return a
* codeset. Try MB_CUR_MAX */
* Unicode code point. Since UTF-8 is the only non-single byte
* encoding we handle, we just say any such encoding is UTF-8, and if
* turns out to be wrong, other things will fail */
- is_utf8 = MB_CUR_MAX >= 4;
+ is_utf8 = (unsigned) MB_CUR_MAX >= STRLENs(MAX_UNICODE_UTF8);
DEBUG_L(PerlIO_printf(Perl_debug_log,
"\tMB_CUR_MAX=%d; ?UTF8 locale=%d\n",
Safefree(save_input_locale);
-# ifdef HAS_MBTOWC
+# ifdef HAS_MBTOWC
/* ... But, most system that have MB_CUR_MAX will also have mbtowc(),
* since they are both in the C99 standard. We can feed a known byte
* result */
if (is_utf8) {
wchar_t wc;
+ int len;
+
PERL_UNUSED_RESULT(mbtowc(&wc, NULL, 0));/* Reset any shift state */
errno = 0;
- if ((size_t)mbtowc(&wc, HYPHEN_UTF8, strlen(HYPHEN_UTF8))
- != strlen(HYPHEN_UTF8)
- || wc != (wchar_t) 0x2010)
+ len = mbtowc(&wc, STR_WITH_LEN(REPLACEMENT_CHARACTER_UTF8));
+
+
+ if ( len != STRLENs(REPLACEMENT_CHARACTER_UTF8)
+ || wc != (wchar_t) UNICODE_REPLACEMENT)
{
is_utf8 = FALSE;
- DEBUG_L(PerlIO_printf(Perl_debug_log, "\thyphen=U+%x\n", (unsigned int)wc));
+ DEBUG_L(PerlIO_printf(Perl_debug_log, "\replacement=U+%x\n",
+ (unsigned int)wc));
DEBUG_L(PerlIO_printf(Perl_debug_log,
"\treturn from mbtowc=%d; errno=%d; ?UTF8 locale=0\n",
- mbtowc(&wc, HYPHEN_UTF8, strlen(HYPHEN_UTF8)), errno));
+ len, errno));
}
}
-# endif
+
+# endif
/* If we switched LC_CTYPE, switch back */
if (save_ctype_locale) {
- setlocale(LC_CTYPE, save_ctype_locale);
+ do_setlocale_c(LC_CTYPE, save_ctype_locale);
Safefree(save_ctype_locale);
}
- return is_utf8;
-# endif
+ goto finish_and_return;
+
+# endif
+
}
cant_use_nllanginfo:
-#else /* nl_langinfo should work if available, so don't bother compiling this
+# else /* nl_langinfo should work if available, so don't bother compiling this
fallback code. The final fallback of looking at the name is
compiled, and will be executed if nl_langinfo fails */
* too, as the odds of a non-UTF8 string being valid UTF-8 are quite small
* */
-#ifdef HAS_LOCALECONV
-# ifdef USE_LOCALE_MONETARY
+# ifdef HAS_LOCALECONV
+# ifdef USE_LOCALE_MONETARY
+
{
char *save_monetary_locale = NULL;
bool only_ascii = FALSE;
- bool is_utf8 = FALSE;
struct lconv* lc;
/* Like above for LC_CTYPE, we first set LC_MONETARY to the locale of
if (category != LC_MONETARY) {
- save_monetary_locale = setlocale(LC_MONETARY, NULL);
+ save_monetary_locale = do_setlocale_c(LC_MONETARY, NULL);
if (! save_monetary_locale) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not find current locale for LC_MONETARY\n"));
Safefree(save_monetary_locale);
save_monetary_locale = NULL;
}
- else if (! setlocale(LC_MONETARY, save_input_locale)) {
+ else if (! do_setlocale_c(LC_MONETARY, save_input_locale)) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not change LC_MONETARY locale to %s\n",
save_input_locale));
/* If we changed it, restore LC_MONETARY to its original locale */
if (save_monetary_locale) {
- setlocale(LC_MONETARY, save_monetary_locale);
+ do_setlocale_c(LC_MONETARY, save_monetary_locale);
Safefree(save_monetary_locale);
}
* is non-ascii UTF-8. */
DEBUG_L(PerlIO_printf(Perl_debug_log, "\t?Currency symbol for %s is UTF-8=%d\n",
save_input_locale, is_utf8));
- Safefree(save_input_locale);
- return is_utf8;
+ goto finish_and_return;
}
}
cant_use_monetary:
-# endif /* USE_LOCALE_MONETARY */
-#endif /* HAS_LOCALECONV */
+# endif /* USE_LOCALE_MONETARY */
+# endif /* HAS_LOCALECONV */
-#if defined(HAS_STRFTIME) && defined(USE_LOCALE_TIME)
+# if defined(HAS_STRFTIME) && defined(USE_LOCALE_TIME)
/* Still haven't found a non-ASCII string to disambiguate UTF-8 or not. Try
* the names of the months and weekdays, timezone, and am/pm indicator */
if (category != LC_TIME) {
- save_time_locale = setlocale(LC_TIME, NULL);
+ save_time_locale = do_setlocale_c(LC_TIME, NULL);
if (! save_time_locale) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not find current locale for LC_TIME\n"));
Safefree(save_time_locale);
save_time_locale = NULL;
}
- else if (! setlocale(LC_TIME, save_input_locale)) {
+ else if (! do_setlocale_c(LC_TIME, save_input_locale)) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not change LC_TIME locale to %s\n",
save_input_locale));
for (i = 0; i < 7 + 12; i++) { /* 7 days; 12 months */
formatted_time = my_strftime("%A %B %Z %p",
- 0, 0, hour, dom, month, 112, 0, 0, is_dst);
+ 0, 0, hour, dom, month, 2012 - 1900, 0, 0, is_dst);
if ( ! formatted_time
|| is_utf8_invariant_string((U8 *) formatted_time, 0))
{
* false otherwise. But first, restore LC_TIME to its original
* locale if we changed it */
if (save_time_locale) {
- setlocale(LC_TIME, save_time_locale);
+ do_setlocale_c(LC_TIME, save_time_locale);
Safefree(save_time_locale);
}
DEBUG_L(PerlIO_printf(Perl_debug_log, "\t?time-related strings for %s are UTF-8=%d\n",
save_input_locale,
is_utf8_string((U8 *) formatted_time, 0)));
- Safefree(save_input_locale);
- return is_utf8_string((U8 *) formatted_time, 0);
+ is_utf8 = is_utf8_string((U8 *) formatted_time, 0);
+ goto finish_and_return;
}
/* Falling off the end of the loop indicates all the names were just
* ASCII. Go on to the next test. If we changed it, restore LC_TIME
* to its original locale */
if (save_time_locale) {
- setlocale(LC_TIME, save_time_locale);
+ do_setlocale_c(LC_TIME, save_time_locale);
Safefree(save_time_locale);
}
DEBUG_L(PerlIO_printf(Perl_debug_log, "All time-related words for %s contain only ASCII; can't use for determining if UTF-8 locale\n", save_input_locale));
}
cant_use_time:
-#endif
+# endif
-#if 0 && defined(USE_LOCALE_MESSAGES) && defined(HAS_SYS_ERRLIST)
+# if 0 && defined(USE_LOCALE_MESSAGES) && defined(HAS_SYS_ERRLIST)
/* This code is ifdefd out because it was found to not be necessary in testing
* on our dromedary test machine, which has over 700 locales. There, this
* are much more likely to have been translated. */
{
int e;
- bool is_utf8 = FALSE;
bool non_ascii = FALSE;
char *save_messages_locale = NULL;
const char * errmsg = NULL;
if (category != LC_MESSAGES) {
- save_messages_locale = setlocale(LC_MESSAGES, NULL);
+ save_messages_locale = do_setlocale_c(LC_MESSAGES, NULL);
if (! save_messages_locale) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not find current locale for LC_MESSAGES\n"));
Safefree(save_messages_locale);
save_messages_locale = NULL;
}
- else if (! setlocale(LC_MESSAGES, save_input_locale)) {
+ else if (! do_setlocale_c(LC_MESSAGES, save_input_locale)) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Could not change LC_MESSAGES locale to %s\n",
save_input_locale));
/* And, if we changed it, restore LC_MESSAGES to its original locale */
if (save_messages_locale) {
- setlocale(LC_MESSAGES, save_messages_locale);
+ do_setlocale_c(LC_MESSAGES, save_messages_locale);
Safefree(save_messages_locale);
}
DEBUG_L(PerlIO_printf(Perl_debug_log, "\t?error messages for %s are UTF-8=%d\n",
save_input_locale,
is_utf8));
- Safefree(save_input_locale);
- return is_utf8;
+ goto finish_and_return;
}
DEBUG_L(PerlIO_printf(Perl_debug_log, "All error messages for %s contain only ASCII; can't use for determining if UTF-8 locale\n", save_input_locale));
}
cant_use_messages:
-#endif
-
-#endif /* the code that is compiled when no nl_langinfo */
+# endif
+# endif /* the code that is compiled when no nl_langinfo */
-#ifndef EBCDIC /* On os390, even if the name ends with "UTF-8', it isn't a
+# ifndef EBCDIC /* On os390, even if the name ends with "UTF-8', it isn't a
UTF-8 locale */
+
/* As a last resort, look at the locale name to see if it matches
* qr/UTF -? * 8 /ix, or some other common locale names. This "name", the
* return of setlocale(), is actually defined to be opaque, so we can't
final_pos = strlen(save_input_locale) - 1;
if (final_pos >= 3) {
- char *name = save_input_locale;
+ const char *name = save_input_locale;
/* Find next 'U' or 'u' and look from there */
while ((name += strcspn(name, "Uu") + 1)
<= save_input_locale + final_pos - 2)
{
- if (!isALPHA_FOLD_NE(*name, 't')
+ if ( isALPHA_FOLD_NE(*name, 't')
|| isALPHA_FOLD_NE(*(name + 1), 'f'))
{
continue;
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Locale %s ends with UTF-8 in name\n",
save_input_locale));
- Safefree(save_input_locale);
- return TRUE;
+ is_utf8 = TRUE;
+ goto finish_and_return;
}
}
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Locale %s doesn't end with UTF-8 in name\n",
save_input_locale));
}
-#endif
-#ifdef WIN32
+# ifdef WIN32
+
/* http://msdn.microsoft.com/en-us/library/windows/desktop/dd317756.aspx */
- if (final_pos >= 4
- && *(save_input_locale + final_pos - 0) == '1'
- && *(save_input_locale + final_pos - 1) == '0'
- && *(save_input_locale + final_pos - 2) == '0'
- && *(save_input_locale + final_pos - 3) == '5'
- && *(save_input_locale + final_pos - 4) == '6')
- {
+ if (memENDs(save_input_locale, final_pos, "65001")) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
- "Locale %s ends with 10056 in name, is UTF-8 locale\n",
+ "Locale %s ends with 65001 in name, is UTF-8 locale\n",
save_input_locale));
- Safefree(save_input_locale);
- return TRUE;
+ is_utf8 = TRUE;
+ goto finish_and_return;
}
-#endif
+
+# endif
+# endif
/* Other common encodings are the ISO 8859 series, which aren't UTF-8. But
* since we are about to return FALSE anyway, there is no point in doing
* this extra work */
-#if 0
+
+# if 0
if (instr(save_input_locale, "8859")) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Locale %s has 8859 in name, not UTF-8 locale\n",
save_input_locale));
- Safefree(save_input_locale);
- return FALSE;
+ is_utf8 = FALSE;
+ goto finish_and_return;
}
-#endif
+# endif
DEBUG_L(PerlIO_printf(Perl_debug_log,
"Assuming locale %s is not a UTF-8 locale\n",
save_input_locale));
+ is_utf8 = FALSE;
+
+ finish_and_return:
+
+ /* Cache this result so we don't have to go through all this next time. */
+ utf8ness_cache_size = sizeof(PL_locale_utf8ness)
+ - (utf8ness_cache - PL_locale_utf8ness);
+
+ /* But we can't save it if it is too large for the total space available */
+ if (LIKELY(input_name_len_with_overhead < utf8ness_cache_size)) {
+ Size_t utf8ness_cache_len = strlen(utf8ness_cache);
+
+ /* Here it can fit, but we may need to clear out the oldest cached
+ * result(s) to do so. Check */
+ if (utf8ness_cache_len + input_name_len_with_overhead
+ >= utf8ness_cache_size)
+ {
+ /* Here we have to clear something out to make room for this.
+ * Start looking at the rightmost place where it could fit and find
+ * the beginning of the entry that extends past that. */
+ char * cutoff = (char *) my_memrchr(utf8ness_cache,
+ UTF8NESS_SEP[0],
+ utf8ness_cache_size
+ - input_name_len_with_overhead);
+
+ assert(cutoff);
+ assert(cutoff >= utf8ness_cache);
+
+ /* This and all subsequent entries must be removed */
+ *cutoff = '\0';
+ utf8ness_cache_len = strlen(utf8ness_cache);
+ }
+
+ /* Make space for the new entry */
+ Move(utf8ness_cache,
+ utf8ness_cache + input_name_len_with_overhead,
+ utf8ness_cache_len + 1 /* Incl. trailing NUL */, char);
+
+ /* And insert it */
+ Copy(delimited, utf8ness_cache, input_name_len_with_overhead - 1, char);
+ utf8ness_cache[input_name_len_with_overhead - 1] = is_utf8 + '0';
+
+ if ((PL_locale_utf8ness[strlen(PL_locale_utf8ness)-1]
+ & (PERL_UINTMAX_T) ~1) != '0')
+ {
+ Perl_croak(aTHX_
+ "panic: %s: %d: Corrupt utf8ness_cache=%s\nlen=%u,"
+ " inserted_name=%s, its_len=%u\n",
+ __FILE__, __LINE__,
+ PL_locale_utf8ness, strlen(PL_locale_utf8ness),
+ delimited, input_name_len_with_overhead);
+ }
+ }
+
+# ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST || debug_initialization) {
+ PerlIO_printf(Perl_debug_log,
+ "PL_locale_utf8ness is now %s; returning %d\n",
+ PL_locale_utf8ness, is_utf8);
+ }
+
+# endif
+
+ Safefree(delimited);
Safefree(save_input_locale);
- return FALSE;
+ return is_utf8;
}
#endif
* to the C locale */
char *errstr;
+ dVAR;
+
+#ifndef USE_LOCALE_MESSAGES
+
+ /* If platform doesn't have messages category, we don't do any switching to
+ * the C locale; we just use whatever strerror() returns */
+
+ errstr = savepv(Strerror(errnum));
+
+#else /* Has locale messages */
-#ifdef USE_LOCALE_MESSAGES /* If platform doesn't have messages category, we
- don't do any switching to the C locale; we just
- use whatever strerror() returns */
const bool within_locale_scope = IN_LC(LC_MESSAGES);
- dVAR;
+# if defined(HAS_POSIX_2008_LOCALE) && defined(HAS_STRERROR_L)
+
+ /* This function is trivial if we don't have to worry about thread safety
+ * and have strerror_l(), as it handles the switch of locales so we don't
+ * have to deal with that. We don't have to worry about thread safety if
+ * this is an unthreaded build, or if strerror_r() is also available. Both
+ * it and strerror_l() are thread-safe. Plain strerror() isn't thread
+ * safe. But on threaded builds when strerror_r() is available, the
+ * apparent call to strerror() below is actually a macro that
+ * behind-the-scenes calls strerror_r().
+ */
+
+# if ! defined(USE_ITHREADS) || defined(HAS_STRERROR_R)
+
+ if (within_locale_scope) {
+ errstr = savepv(strerror(errnum));
+ }
+ else {
+ errstr = savepv(strerror_l(errnum, PL_C_locale_obj));
+ }
+
+# else
+
+ /* Here we have strerror_l(), but not strerror_r() and we are on a
+ * threaded-build. We use strerror_l() for everything, constructing a
+ * locale to pass to it if necessary */
+
+ bool do_free = FALSE;
+ locale_t locale_to_use;
+
+ if (within_locale_scope) {
+ locale_to_use = uselocale((locale_t) 0);
+ if (locale_to_use == LC_GLOBAL_LOCALE) {
+ locale_to_use = duplocale(LC_GLOBAL_LOCALE);
+ do_free = TRUE;
+ }
+ }
+ else { /* Use C locale if not within 'use locale' scope */
+ locale_to_use = PL_C_locale_obj;
+ }
+
+ errstr = savepv(strerror_l(errnum, locale_to_use));
+
+ if (do_free) {
+ freelocale(locale_to_use);
+ }
+
+# endif
+# else /* Doesn't have strerror_l() */
+
+# ifdef USE_POSIX_2008_LOCALE
-# ifdef USE_THREAD_SAFE_LOCALE
locale_t save_locale = NULL;
-# else
- char * save_locale = NULL;
+
+# else
+
+ const char * save_locale = NULL;
bool locale_is_C = FALSE;
/* We have a critical section to prevent another thread from changing the
* setlocale() ) */
LOCALE_LOCK;
-# endif
+# endif
DEBUG_Lv(PerlIO_printf(Perl_debug_log,
"my_strerror called with errnum %d\n", errnum));
if (! within_locale_scope) {
errno = 0;
-# ifdef USE_THREAD_SAFE_LOCALE /* Use the thread-safe locale functions */
+# ifdef USE_POSIX_2008_LOCALE /* Use the thread-safe locale functions */
DEBUG_Lv(PerlIO_printf(Perl_debug_log,
"Not within locale scope, about to call"
"uselocale returned 0x%p\n", save_locale));
}
-# else /* Not thread-safe build */
+# else /* Not thread-safe build */
- save_locale = setlocale(LC_MESSAGES, NULL);
+ save_locale = do_setlocale_c(LC_MESSAGES, NULL);
if (! save_locale) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"setlocale failed, errno=%d\n", errno));
/* The setlocale() just below likely will zap 'save_locale', so
* create a copy. */
save_locale = savepv(save_locale);
- setlocale(LC_MESSAGES, "C");
+ do_setlocale_c(LC_MESSAGES, "C");
}
}
-# endif
+# endif
} /* end of ! within_locale_scope */
else {
__FILE__, __LINE__));
}
-#endif
-
DEBUG_Lv(PerlIO_printf(Perl_debug_log,
"Any locale change has been done; about to call Strerror\n"));
- errstr = Strerror(errnum);
- if (errstr) {
-
-#ifdef DEBUGGING
-
- if (DEBUG_Lv_TEST) {
- PerlIO_printf(Perl_debug_log, "Strerror returned; saving a copy: '");
- print_bytes_for_locale(errstr, errstr + strlen(errstr), 0);
- PerlIO_printf(Perl_debug_log, "'\n");
- }
-
-#endif
-
- errstr = savepv(errstr);
- SAVEFREEPV(errstr);
- }
-
-#ifdef USE_LOCALE_MESSAGES
+ errstr = savepv(Strerror(errnum));
if (! within_locale_scope) {
errno = 0;
-# ifdef USE_THREAD_SAFE_LOCALE
+# ifdef USE_POSIX_2008_LOCALE
DEBUG_Lv(PerlIO_printf(Perl_debug_log,
"%s: %d: not within locale scope, restoring the locale\n",
}
}
-# else
+# else
if (save_locale && ! locale_is_C) {
- if (! setlocale(LC_MESSAGES, save_locale)) {
+ if (! do_setlocale_c(LC_MESSAGES, save_locale)) {
DEBUG_L(PerlIO_printf(Perl_debug_log,
"setlocale restore failed, errno=%d\n", errno));
}
LOCALE_UNLOCK;
-# endif
+# endif
+# endif /* End of doesn't have strerror_l */
+#endif /* End of does have locale messages */
+
+#ifdef DEBUGGING
+
+ if (DEBUG_Lv_TEST) {
+ PerlIO_printf(Perl_debug_log, "Strerror returned; saving a copy: '");
+ print_bytes_for_locale(errstr, errstr + strlen(errstr), 0);
+ PerlIO_printf(Perl_debug_log, "'\n");
+ }
+
#endif
+ SAVEFREEPV(errstr);
return errstr;
}
/*
-=head1 Locale-related functions and macros
-
=for apidoc sync_locale
Changing the program's locale should be avoided by XS code. Nevertheless,
void
Perl_sync_locale(pTHX)
{
+ char * newlocale;
#ifdef USE_LOCALE_CTYPE
- new_ctype(setlocale(LC_CTYPE, NULL));
-#endif /* USE_LOCALE_CTYPE */
+ newlocale = do_setlocale_c(LC_CTYPE, NULL);
+ DEBUG_Lv(PerlIO_printf(Perl_debug_log,
+ "%s:%d: %s\n", __FILE__, __LINE__,
+ setlocale_debug_string(LC_CTYPE, NULL, newlocale)));
+ new_ctype(newlocale);
+
+#endif /* USE_LOCALE_CTYPE */
#ifdef USE_LOCALE_COLLATE
- new_collate(setlocale(LC_COLLATE, NULL));
-#endif
+ newlocale = do_setlocale_c(LC_COLLATE, NULL);
+ DEBUG_Lv(PerlIO_printf(Perl_debug_log,
+ "%s:%d: %s\n", __FILE__, __LINE__,
+ setlocale_debug_string(LC_COLLATE, NULL, newlocale)));
+ new_collate(newlocale);
+
+#endif
#ifdef USE_LOCALE_NUMERIC
- set_numeric_local(); /* Switch from "C" to underlying LC_NUMERIC */
- new_numeric(setlocale(LC_NUMERIC, NULL));
+
+ newlocale = do_setlocale_c(LC_NUMERIC, NULL);
+ DEBUG_Lv(PerlIO_printf(Perl_debug_log,
+ "%s:%d: %s\n", __FILE__, __LINE__,
+ setlocale_debug_string(LC_NUMERIC, NULL, newlocale)));
+ new_numeric(newlocale);
+
#endif /* USE_LOCALE_NUMERIC */
}
static char ret[128] = "If you can read this, thank your buggy C"
" library strlcpy(), and change your hints file"
" to undef it";
- my_strlcpy(ret, "setlocale(", sizeof(ret));
-
- switch (category) {
- default:
- my_snprintf(ret, sizeof(ret), "%s? %d", ret, category);
- break;
-# ifdef LC_ALL
- case LC_ALL:
- my_strlcat(ret, "LC_ALL", sizeof(ret));
- break;
-# endif
-# ifdef LC_CTYPE
- case LC_CTYPE:
- my_strlcat(ret, "LC_CTYPE", sizeof(ret));
- break;
-# endif
-# ifdef LC_NUMERIC
- case LC_NUMERIC:
- my_strlcat(ret, "LC_NUMERIC", sizeof(ret));
- break;
-# endif
-# ifdef LC_COLLATE
- case LC_COLLATE:
- my_strlcat(ret, "LC_COLLATE", sizeof(ret));
- break;
-# endif
-# ifdef LC_TIME
- case LC_TIME:
- my_strlcat(ret, "LC_TIME", sizeof(ret));
- break;
-# endif
-# ifdef LC_MONETARY
- case LC_MONETARY:
- my_strlcat(ret, "LC_MONETARY", sizeof(ret));
- break;
-# endif
-# ifdef LC_MESSAGES
- case LC_MESSAGES:
- my_strlcat(ret, "LC_MESSAGES", sizeof(ret));
- break;
-# endif
- }
+ my_strlcpy(ret, "setlocale(", sizeof(ret));
+ my_strlcat(ret, category_name(category), sizeof(ret));
my_strlcat(ret, ", ", sizeof(ret));
if (locale) {
https://perl5.git.perl.org / perl5.git / blobdiff