-#ifndef H_PERLIO
-#define H_PERLIO 1
-
-/* Clean up (or at least document) the various possible #defines.
- This section attempts to match the 5.003_03 Configure variables
- onto the 5.003_02 header file values.
- I can't figure out where USE_STDIO was supposed to be set.
- --AD
+/* perlio.h
+ *
+ * Copyright (C) 1996, 1997, 1999, 2000, 2001, 2002, 2003,
+ * by Larry Wall and others
+ *
+ * You may distribute under the terms of either the GNU General Public
+ * License or the Artistic License, as specified in the README file.
+ *
+ */
+
+#ifndef _PERLIO_H
+#define _PERLIO_H
+/*
+ Interface for perl to IO functions.
+ There is a hierarchy of Configure determined #define controls:
+ USE_STDIO - forces PerlIO_xxx() to be #define-d onto stdio functions.
+ This is used for x2p subdirectory and for conservative
+ builds - "just like perl5.00X used to be".
+ This dominates over the others.
+
+ USE_PERLIO - The primary Configure variable that enables PerlIO.
+ If USE_PERLIO is _NOT_ set
+ then USE_STDIO above will be set to be conservative.
+ If USE_PERLIO is set
+ then there are two modes determined by USE_SFIO:
+
+ USE_SFIO - If set causes PerlIO_xxx() to be #define-d onto sfio functions.
+ A backward compatability mode for some specialist applications.
+
+ If USE_SFIO is not set then PerlIO_xxx() are real functions
+ defined in perlio.c which implement extra functionality
+ required for utf8 support.
+
+ One further note - the table-of-functions scheme controlled
+ by PERL_IMPLICIT_SYS turns on USE_PERLIO so that iperlsys.h can
+ #define PerlIO_xxx() to go via the function table, without having
+ to #undef them from (say) stdio forms.
+
*/
+
+#if defined(PERL_IMPLICIT_SYS)
#ifndef USE_PERLIO
-# define PERLIO_IS_STDIO
+#ifndef NETWARE
+/* # define USE_PERLIO */
+#endif
+#endif
+#endif
+
+#ifndef USE_PERLIO
+# define USE_STDIO
#endif
-/* Below is the 5.003_02 stuff. */
#ifdef USE_STDIO
# ifndef PERLIO_IS_STDIO
# define PERLIO_IS_STDIO
# endif
-#else
-extern void PerlIO_init _((void));
-#endif
-
-#ifdef PERL_OBJECT
-
-#include "ipstdio.h"
-
-#define PerlIO_canset_cnt(f) 1
-#define PerlIO_has_base(f) 1
-#define PerlIO_has_cntptr(f) 1
-#define PerlIO_fast_gets(f) 1
-
-#define PerlIO_stdin() piStdIO->Stdin()
-#define PerlIO_stdout() piStdIO->Stdout()
-#define PerlIO_stderr() piStdIO->Stderr()
-#define PerlIO_open(x,y) piStdIO->Open((x),(y), ErrorNo())
-#define PerlIO_close(f) piStdIO->Close((f), ErrorNo())
-#define PerlIO_eof(f) piStdIO->Eof((f), ErrorNo())
-#define PerlIO_error(f) piStdIO->Error((f), ErrorNo())
-#define PerlIO_clearerr(f) piStdIO->Clearerr((f), ErrorNo())
-#define PerlIO_getc(f) piStdIO->Getc((f), ErrorNo())
-#define PerlIO_get_base(f) piStdIO->GetBase((f), ErrorNo())
-#define PerlIO_get_bufsiz(f) piStdIO->GetBufsiz((f), ErrorNo())
-#define PerlIO_get_cnt(f) piStdIO->GetCnt((f), ErrorNo())
-#define PerlIO_get_ptr(f) piStdIO->GetPtr((f), ErrorNo())
-#define PerlIO_putc(f,c) piStdIO->Putc((f),(c), ErrorNo())
-#define PerlIO_puts(f,s) piStdIO->Puts((f),(s), ErrorNo())
-#define PerlIO_flush(f) piStdIO->Flush((f), ErrorNo())
-#define PerlIO_gets(s, n, fp) piStdIO->Gets((fp), s, n, ErrorNo())
-#define PerlIO_ungetc(f,c) piStdIO->Ungetc((f),(c), ErrorNo())
-#define PerlIO_fileno(f) piStdIO->Fileno((f), ErrorNo())
-#define PerlIO_fdopen(f, s) piStdIO->Fdopen((f),(s), ErrorNo())
-#define PerlIO_reopen(p, m, f) piStdIO->Reopen((p), (m), (f), ErrorNo())
-#define PerlIO_read(f,buf,count) (SSize_t)piStdIO->Read((f), (buf), (count), ErrorNo())
-#define PerlIO_write(f,buf,count) piStdIO->Write((f), (buf), (count), ErrorNo())
-#define PerlIO_setbuf(f,b) piStdIO->SetBuf((f), (b), ErrorNo())
-#define PerlIO_setvbuf(f,b,t,s) piStdIO->SetVBuf((f), (b), (t), (s), ErrorNo())
-#define PerlIO_set_cnt(f,c) piStdIO->SetCnt((f), (c), ErrorNo())
-#define PerlIO_set_ptrcnt(f,p,c) piStdIO->SetPtrCnt((f), (p), (c), ErrorNo())
-#define PerlIO_setlinebuf(f) piStdIO->Setlinebuf((f), ErrorNo())
-#define PerlIO_printf fprintf
-#define PerlIO_stdoutf piStdIO->Printf
-#define PerlIO_vprintf(f,fmt,a) piStdIO->Vprintf((f), ErrorNo(), (fmt),a)
-#define PerlIO_tell(f) piStdIO->Tell((f), ErrorNo())
-#define PerlIO_seek(f,o,w) piStdIO->Seek((f),(o),(w), ErrorNo())
-#define PerlIO_getpos(f,p) piStdIO->Getpos((f),(p), ErrorNo())
-#define PerlIO_setpos(f,p) piStdIO->Setpos((f),(p), ErrorNo())
-#define PerlIO_rewind(f) piStdIO->Rewind((f), ErrorNo())
-#define PerlIO_tmpfile() piStdIO->Tmpfile(ErrorNo())
-#define PerlIO_init() piStdIO->Init(ErrorNo())
-#undef init_os_extras
-#define init_os_extras() piStdIO->InitOSExtras(this)
+#endif
-#else
-#include "perlsdio.h"
+/* -------------------- End of Configure controls ---------------------------- */
+
+/*
+ * Although we may not want stdio to be used including <stdio.h> here
+ * avoids issues where stdio.h has strange side effects
+ */
+#include <stdio.h>
+
+#ifdef __BEOS__
+int fseeko(FILE *stream, off_t offset, int whence);
+off_t ftello(FILE *stream);
#endif
-#ifndef PERLIO_IS_STDIO
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FTELLO) && !defined(USE_FTELL64)
+#define ftell ftello
+#endif
+
+#if defined(USE_64_BIT_STDIO) && defined(HAS_FSEEKO) && !defined(USE_FSEEK64)
+#define fseek fseeko
+#endif
+
+/* BS2000 includes are sometimes a bit non standard :-( */
+#if defined(POSIX_BC) && defined(O_BINARY) && !defined(O_TEXT)
+#undef O_BINARY
+#endif
+
+#ifdef PERLIO_IS_STDIO
+/* #define PerlIO_xxxx() as equivalent stdio function */
+#include "perlsdio.h"
+#else /* PERLIO_IS_STDIO */
#ifdef USE_SFIO
+/* #define PerlIO_xxxx() as equivalent sfio function */
#include "perlsfio.h"
-#endif /* USE_SFIO */
-#endif /* PERLIO_IS_STDIO */
+#endif /* USE_SFIO */
+#endif /* PERLIO_IS_STDIO */
+
+#ifndef PerlIO
+/* ----------- PerlIO implementation ---------- */
+/* PerlIO not #define-d to something else - define the implementation */
+
+typedef struct _PerlIO PerlIOl;
+typedef struct _PerlIO_funcs PerlIO_funcs;
+typedef PerlIOl *PerlIO;
+#define PerlIO PerlIO
+#define PERLIO_LAYERS 1
+
+/* Making the big PerlIO_funcs vtables const is good (enables placing
+ * them in the const section which is good for speed, security, and
+ * embeddability) but this cannot be done by default because of
+ * backward compatibility. */
+#ifdef PERLIO_FUNCS_CONST
+#define PERLIO_FUNCS_DECL(funcs) const PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (PerlIO_funcs*)(funcs)
+#else
+#define PERLIO_FUNCS_DECL(funcs) PerlIO_funcs funcs
+#define PERLIO_FUNCS_CAST(funcs) (funcs)
+#endif
+
+PERL_EXPORT_C void PerlIO_define_layer(pTHX_ PerlIO_funcs *tab);
+PERL_EXPORT_C PerlIO_funcs *PerlIO_find_layer(pTHX_ const char *name,
+ STRLEN len,
+ int load);
+PERL_EXPORT_C PerlIO *PerlIO_push(pTHX_ PerlIO *f, PERLIO_FUNCS_DECL(*tab),
+ const char *mode, SV *arg);
+PERL_EXPORT_C void PerlIO_pop(pTHX_ PerlIO *f);
+PERL_EXPORT_C AV* PerlIO_get_layers(pTHX_ PerlIO *f);
+PERL_EXPORT_C void PerlIO_clone(pTHX_ PerlInterpreter *proto,
+ CLONE_PARAMS *param);
+
+#endif /* PerlIO */
+
+/* ----------- End of implementation choices ---------- */
+
+#ifndef PERLIO_IS_STDIO
+/* Not using stdio _directly_ as PerlIO */
+
+/* We now need to determine what happens if source trys to use stdio.
+ * There are three cases based on PERLIO_NOT_STDIO which XS code
+ * can set how it wants.
+ */
+
+#ifdef PERL_CORE
+/* Make a choice for perl core code
+ - currently this is set to try and catch lingering raw stdio calls.
+ This is a known issue with some non UNIX ports which still use
+ "native" stdio features.
+*/
+#ifndef PERLIO_NOT_STDIO
+#define PERLIO_NOT_STDIO 1
+#endif
+#else
+#ifndef PERLIO_NOT_STDIO
+#define PERLIO_NOT_STDIO 0
+#endif
+#endif
+
+#ifdef PERLIO_NOT_STDIO
+#if PERLIO_NOT_STDIO
+/*
+ * PERLIO_NOT_STDIO #define'd as 1
+ * Case 1: Strong denial of stdio - make all stdio calls (we can think of) errors
+ */
+#include "nostdio.h"
+#else /* if PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO #define'd as 0
+ * Case 2: Declares that both PerlIO and stdio can be used
+ */
+#endif /* if PERLIO_NOT_STDIO */
+#else /* ifdef PERLIO_NOT_STDIO */
+/*
+ * PERLIO_NOT_STDIO not defined
+ * Case 3: Try and fake stdio calls as PerlIO calls
+ */
+#include "fakesdio.h"
+#endif /* ifndef PERLIO_NOT_STDIO */
+#endif /* PERLIO_IS_STDIO */
+
+#define specialCopIO(sv) ((sv) == NULL)
+
+/* ----------- fill in things that have not got #define'd ---------- */
+
+#ifndef Fpos_t
+#define Fpos_t Off_t
+#endif
#ifndef EOF
#define EOF (-1)
#define SEEK_END 2
#endif
-#ifndef PerlIO
-struct _PerlIO;
-#define PerlIO struct _PerlIO
-#endif /* No PerlIO */
+#define PERLIO_DUP_CLONE 1
+#define PERLIO_DUP_FD 2
-#ifndef Fpos_t
-#define Fpos_t long
-#endif
+/* --------------------- Now prototypes for functions --------------- */
-#ifndef NEXT30_NO_ATTRIBUTE
-#ifndef HASATTRIBUTE /* disable GNU-cc attribute checking? */
-#ifdef __attribute__ /* Avoid possible redefinition errors */
-#undef __attribute__
-#endif
-#define __attribute__(attr)
+START_EXTERN_C
+#ifndef __attribute__format__
+# ifdef HASATTRIBUTE_FORMAT
+# define __attribute__format__(x,y,z) __attribute__((format(x,y,z)))
+# else
+# define __attribute__format__(x,y,z)
+# endif
#endif
+#ifndef PerlIO_init
+PERL_EXPORT_C void PerlIO_init(pTHX);
#endif
-
#ifndef PerlIO_stdoutf
-extern int PerlIO_stdoutf _((const char *,...))
- __attribute__((format (printf, 1, 2)));
+PERL_EXPORT_C int PerlIO_stdoutf(const char *, ...)
+ __attribute__format__(__printf__, 1, 2);
#endif
#ifndef PerlIO_puts
-extern int PerlIO_puts _((PerlIO *,const char *));
+PERL_EXPORT_C int PerlIO_puts(PerlIO *, const char *);
#endif
#ifndef PerlIO_open
-extern PerlIO * PerlIO_open _((const char *,const char *));
+PERL_EXPORT_C PerlIO *PerlIO_open(const char *, const char *);
#endif
-#ifndef PerlIO_close
-extern int PerlIO_close _((PerlIO *));
+#ifndef PerlIO_openn
+PERL_EXPORT_C PerlIO *PerlIO_openn(pTHX_ const char *layers, const char *mode,
+ int fd, int imode, int perm, PerlIO *old,
+ int narg, SV **arg);
#endif
#ifndef PerlIO_eof
-extern int PerlIO_eof _((PerlIO *));
+PERL_EXPORT_C int PerlIO_eof(PerlIO *);
#endif
#ifndef PerlIO_error
-extern int PerlIO_error _((PerlIO *));
+PERL_EXPORT_C int PerlIO_error(PerlIO *);
#endif
#ifndef PerlIO_clearerr
-extern void PerlIO_clearerr _((PerlIO *));
+PERL_EXPORT_C void PerlIO_clearerr(PerlIO *);
#endif
#ifndef PerlIO_getc
-extern int PerlIO_getc _((PerlIO *));
+PERL_EXPORT_C int PerlIO_getc(PerlIO *);
#endif
#ifndef PerlIO_putc
-extern int PerlIO_putc _((PerlIO *,int));
-#endif
-#ifndef PerlIO_flush
-extern int PerlIO_flush _((PerlIO *));
+PERL_EXPORT_C int PerlIO_putc(PerlIO *, int);
#endif
#ifndef PerlIO_ungetc
-extern int PerlIO_ungetc _((PerlIO *,int));
-#endif
-#ifndef PerlIO_fileno
-extern int PerlIO_fileno _((PerlIO *));
+PERL_EXPORT_C int PerlIO_ungetc(PerlIO *, int);
#endif
#ifndef PerlIO_fdopen
-extern PerlIO * PerlIO_fdopen _((int, const char *));
+PERL_EXPORT_C PerlIO *PerlIO_fdopen(int, const char *);
#endif
#ifndef PerlIO_importFILE
-extern PerlIO * PerlIO_importFILE _((FILE *,int));
+PERL_EXPORT_C PerlIO *PerlIO_importFILE(FILE *, const char *);
#endif
#ifndef PerlIO_exportFILE
-extern FILE * PerlIO_exportFILE _((PerlIO *,int));
+PERL_EXPORT_C FILE *PerlIO_exportFILE(PerlIO *, const char *);
#endif
#ifndef PerlIO_findFILE
-extern FILE * PerlIO_findFILE _((PerlIO *));
+PERL_EXPORT_C FILE *PerlIO_findFILE(PerlIO *);
#endif
#ifndef PerlIO_releaseFILE
-extern void PerlIO_releaseFILE _((PerlIO *,FILE *));
+PERL_EXPORT_C void PerlIO_releaseFILE(PerlIO *, FILE *);
#endif
#ifndef PerlIO_read
-extern SSize_t PerlIO_read _((PerlIO *,void *,Size_t));
+PERL_EXPORT_C SSize_t PerlIO_read(PerlIO *, void *, Size_t);
+#endif
+#ifndef PerlIO_unread
+PERL_EXPORT_C SSize_t PerlIO_unread(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_write
-extern SSize_t PerlIO_write _((PerlIO *,const void *,Size_t));
+PERL_EXPORT_C SSize_t PerlIO_write(PerlIO *, const void *, Size_t);
#endif
#ifndef PerlIO_setlinebuf
-extern void PerlIO_setlinebuf _((PerlIO *));
+PERL_EXPORT_C void PerlIO_setlinebuf(PerlIO *);
#endif
#ifndef PerlIO_printf
-extern int PerlIO_printf _((PerlIO *, const char *,...))
- __attribute__((format (printf, 2, 3)));
+PERL_EXPORT_C int PerlIO_printf(PerlIO *, const char *, ...)
+ __attribute__format__(__printf__, 2, 3);
#endif
#ifndef PerlIO_sprintf
-extern int PerlIO_sprintf _((char *, int, const char *,...))
- __attribute__((format (printf, 3, 4)));
+PERL_EXPORT_C int PerlIO_sprintf(char *, int, const char *, ...)
+ __attribute__format__(__printf__, 3, 4);
#endif
#ifndef PerlIO_vprintf
-extern int PerlIO_vprintf _((PerlIO *, const char *, va_list));
+PERL_EXPORT_C int PerlIO_vprintf(PerlIO *, const char *, va_list);
#endif
#ifndef PerlIO_tell
-extern long PerlIO_tell _((PerlIO *));
+PERL_EXPORT_C Off_t PerlIO_tell(PerlIO *);
#endif
#ifndef PerlIO_seek
-extern int PerlIO_seek _((PerlIO *,off_t,int));
+PERL_EXPORT_C int PerlIO_seek(PerlIO *, Off_t, int);
#endif
#ifndef PerlIO_rewind
-extern void PerlIO_rewind _((PerlIO *));
+PERL_EXPORT_C void PerlIO_rewind(PerlIO *);
#endif
#ifndef PerlIO_has_base
-extern int PerlIO_has_base _((PerlIO *));
+PERL_EXPORT_C int PerlIO_has_base(PerlIO *);
#endif
#ifndef PerlIO_has_cntptr
-extern int PerlIO_has_cntptr _((PerlIO *));
+PERL_EXPORT_C int PerlIO_has_cntptr(PerlIO *);
#endif
#ifndef PerlIO_fast_gets
-extern int PerlIO_fast_gets _((PerlIO *));
+PERL_EXPORT_C int PerlIO_fast_gets(PerlIO *);
#endif
#ifndef PerlIO_canset_cnt
-extern int PerlIO_canset_cnt _((PerlIO *));
+PERL_EXPORT_C int PerlIO_canset_cnt(PerlIO *);
#endif
#ifndef PerlIO_get_ptr
-extern STDCHAR * PerlIO_get_ptr _((PerlIO *));
+PERL_EXPORT_C STDCHAR *PerlIO_get_ptr(PerlIO *);
#endif
#ifndef PerlIO_get_cnt
-extern int PerlIO_get_cnt _((PerlIO *));
+PERL_EXPORT_C int PerlIO_get_cnt(PerlIO *);
#endif
#ifndef PerlIO_set_cnt
-extern void PerlIO_set_cnt _((PerlIO *,int));
+PERL_EXPORT_C void PerlIO_set_cnt(PerlIO *, int);
#endif
#ifndef PerlIO_set_ptrcnt
-extern void PerlIO_set_ptrcnt _((PerlIO *,STDCHAR *,int));
+PERL_EXPORT_C void PerlIO_set_ptrcnt(PerlIO *, STDCHAR *, int);
#endif
#ifndef PerlIO_get_base
-extern STDCHAR * PerlIO_get_base _((PerlIO *));
+PERL_EXPORT_C STDCHAR *PerlIO_get_base(PerlIO *);
#endif
#ifndef PerlIO_get_bufsiz
-extern int PerlIO_get_bufsiz _((PerlIO *));
+PERL_EXPORT_C int PerlIO_get_bufsiz(PerlIO *);
#endif
#ifndef PerlIO_tmpfile
-extern PerlIO * PerlIO_tmpfile _((void));
+PERL_EXPORT_C PerlIO *PerlIO_tmpfile(void);
#endif
#ifndef PerlIO_stdin
-extern PerlIO * PerlIO_stdin _((void));
+PERL_EXPORT_C PerlIO *PerlIO_stdin(void);
#endif
#ifndef PerlIO_stdout
-extern PerlIO * PerlIO_stdout _((void));
+PERL_EXPORT_C PerlIO *PerlIO_stdout(void);
#endif
#ifndef PerlIO_stderr
-extern PerlIO * PerlIO_stderr _((void));
+PERL_EXPORT_C PerlIO *PerlIO_stderr(void);
#endif
#ifndef PerlIO_getpos
-extern int PerlIO_getpos _((PerlIO *,Fpos_t *));
+PERL_EXPORT_C int PerlIO_getpos(PerlIO *, SV *);
#endif
#ifndef PerlIO_setpos
-extern int PerlIO_setpos _((PerlIO *,const Fpos_t *));
+PERL_EXPORT_C int PerlIO_setpos(PerlIO *, SV *);
+#endif
+#ifndef PerlIO_fdupopen
+PERL_EXPORT_C PerlIO *PerlIO_fdupopen(pTHX_ PerlIO *, CLONE_PARAMS *, int);
+#endif
+#if !defined(PerlIO_modestr) && !defined(PERLIO_IS_STDIO)
+PERL_EXPORT_C char *PerlIO_modestr(PerlIO *, char *buf);
+#endif
+#ifndef PerlIO_isutf8
+PERL_EXPORT_C int PerlIO_isutf8(PerlIO *);
+#endif
+#ifndef PerlIO_apply_layers
+PERL_EXPORT_C int PerlIO_apply_layers(pTHX_ PerlIO *f, const char *mode,
+ const char *names);
+#endif
+#ifndef PerlIO_binmode
+PERL_EXPORT_C int PerlIO_binmode(pTHX_ PerlIO *f, int iotype, int omode,
+ const char *names);
#endif
-#endif /* Include guard */
+#ifndef PerlIO_getname
+PERL_EXPORT_C char *PerlIO_getname(PerlIO *, char *);
+#endif
+
+PERL_EXPORT_C void PerlIO_destruct(pTHX);
+
+PERL_EXPORT_C int PerlIO_intmode2str(int rawmode, char *mode, int *writing);
+
+#ifdef PERLIO_LAYERS
+PERL_EXPORT_C void PerlIO_cleanup(pTHX);
+
+PERL_EXPORT_C void PerlIO_debug(const char *fmt, ...)
+ __attribute__format__(__printf__, 1, 2);
+typedef struct PerlIO_list_s PerlIO_list_t;
+
+
+#endif
+
+END_EXTERN_C
+#endif /* _PERLIO_H */
https://perl5.git.perl.org / perl5.git / blobdiff