#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 through 6.0 (and possibly newer versions)
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
+# Visual C++ 2.0 through 7.0 (and possibly newer versions)
+# Borland C++ 5.02 or better
+# Mingw32 with gcc-2.95.2 or better
# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-INST_VER *= \5.9.2
+#INST_VER *= \5.9.4
#
# Comment this out if you DON'T want your perl installation to have
# the same location. Commenting it out gives you a simpler
# installation that is easier to understand for beginners.
#
-INST_ARCH *= \$(ARCHNAME)
+#INST_ARCH *= \$(ARCHNAME)
+
+#
+# Uncomment this if you want perl to run
+# $Config{sitelibexp}\sitecustomize.pl
+# before anything else. This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST *= define
#
# uncomment to enable multiple interpreters. This is need for fork()
# Comment this out if you don't want to enable large file support for
# some reason. Should normally only be changed to maintain compatibility
# with an older release of perl.
-USE_LARGE_FILES *= define
+USE_LARGE_FILES *= define
#
# uncomment exactly one of the following
#CCTYPE *= MSVC20
# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
-# Visual C++ >= 6.x
-CCTYPE *= MSVC60
+# Visual C++ 6.x (aka Visual Studio 98)
+#CCTYPE *= MSVC60
+# Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
+#CCTYPE *= MSVC70FREE
+# Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
+#CCTYPE *= MSVC70
# Borland 5.02 or later
#CCTYPE *= BORLAND
-# mingw32+gcc-2.95.2 or better
-#CCTYPE *= GCC
-# Uncomment this if you are using the latest MinGW release (2.0.0)
-# with gcc3.2
-#USE_GCC_V3_2 *= define
+# MinGW with gcc-2.95.2 or later
+CCTYPE *= GCC
#
# uncomment this if your Borland compiler is older than v5.4.
-#BCCOLD = define
+#BCCOLD *= define
#
# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL = define
+#BCCVCL *= define
#
# uncomment this if you are compiling under Windows 95/98 and command.com
#PERL_MALLOC *= define
#
+# set this to enable debugging mstats
+# This must be enabled to use the Devel::Peek::mstat() function. This cannot
+# be enabled without PERL_MALLOC as well.
+#
+#DEBUG_MSTATS *= define
+
+#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# not be quoted)
#
.IF "$(CCTYPE)" == "BORLAND"
-CCHOME *= C:\borland\bcc55
+CCHOME *= C:\Borland\BCC55
.ELIF "$(CCTYPE)" == "GCC"
CCHOME *= C:\MinGW
.ELSE
#
# Additional compiler flags can be specified here.
#
+BUILDOPT *= $(BUILDOPTEXTRA)
+
+#
+# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
+# internal hash function unless the PERL_HASH_SEED environment variable is set.
+# Alternatively, adding -DNO_HASH_SEED will completely disable the
+# randomization feature.
+# The latter is required to maintain binary compatibility with Perl 5.8.0.
+#
+#BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
+#BUILDOPT += -DNO_HASH_SEED
#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#
#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
#
.ENDIF
PERL_MALLOC *= undef
+DEBUG_MSTATS *= undef
+USE_SITECUST *= undef
USE_MULTI *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
USE_LARGE_FILES *= undef
USE_PERLCRT *= undef
-.IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
+.IF "$(USE_IMP_SYS)" == "define"
+PERL_MALLOC = undef
+.ENDIF
+
+.IF "$(PERL_MALLOC)" == "undef"
+DEBUG_MSTATS = undef
+.ENDIF
+
+.IF "$(DEBUG_MSTATS)" == "define"
+BUILDOPT += -DPERL_DEBUGGING_MSTATS
+.ENDIF
+
+.IF "$(USE_IMP_SYS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
.ENDIF
-.IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
+.IF "$(USE_ITHREADS) $(USE_MULTI)" == "define undef"
USE_MULTI != define
.ENDIF
+.IF "$(USE_SITECUST)" == "define"
+BUILDOPT += -DUSE_SITECUSTOMIZE
+.ENDIF
+
.IF "$(USE_MULTI)" != "undef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
ARCHNAME !:= $(ARCHNAME)-thread
.ENDIF
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
-.ENDIF
+# Visual Studio 98 and .NET 2003 specific
+# VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
+# about 10% less time. (The free version of 7.x can't do this, however.)
+.IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
+DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
.ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
INST_HTML = $(INST_TOP)$(INST_VER)\html
#
.ENDIF
LIB32 = tlib /P128
IMPLIB = implib -c
-RSC = rc
+RSC = brcc32
#
# Options
CXX_FLAG = -P
LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
+
+# same libs as MSVC, except Borland doesn't have oldnames.lib
+LIBFILES = $(CRYPT_LIB) \
+ kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib \
+ import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
LINK_DBG =
.ENDIF
+EXTRACFLAGS =
CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
+ -L"$(CCLIBDIR)\PSDK"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
LIBOUT_FLAG =
CC = gcc
LINK32 = g++
-.IF "$(USE_GCC_V3_2)" == "define"
-LINK32 = g++
-.END
LIB32 = ar rc
IMPLIB = dlltool
RSC = windres
LIBFILES = $(CRYPT_LIB) $(LIBC) \
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
- -lwinmm -lversion -lodbc32
+ -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
+ -lwinmm -lversion -lodbc32 -lodbccp32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -g
.ELSE
-OPTIMIZE = -g -O2
-LINK_DBG = -g
+OPTIMIZE = -s -O2
+LINK_DBG = -s
.ENDIF
+EXTRACFLAGS =
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
.ENDIF
LINK_DBG = -debug
.ELSE
-OPTIMIZE = -MD -DNDEBUG
-LINK_DBG = -release
+OPTIMIZE = -MD -Zi -DNDEBUG
+# we enable debug symbols in release builds also
+LINK_DBG = -debug -opt:ref,icf
+# you may want to enable this if you want COFF symbols in the executables
+# in addition to the PDB symbols. The default Dr. Watson that ships with
+# Windows can use the the former but not latter. The free WinDbg can be
+# installed to get better stack traces from just the PDB symbols, so we
+# avoid the bloat of COFF symbols by default.
+#LINK_DBG = $(LINK_DBG) -debugtype:both
.IF "$(WIN64)" == "define"
# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
OPTIMIZE += -Ox -GL
OPTIMIZE += -Wp64 -Op
.ENDIF
+# the string-pooling option -Gf is deprecated in VC++ 7.x and will be removed
+# in later versions, so use read-only string-pooling (-GF) instead
+.IF "$(CCTYPE)" == "MSVC70FREE" || "$(CCTYPE)" == "MSVC70"
+STRPOOL = -GF
+.ELSE
+STRPOOL = -Gf
+.ENDIF
+
.IF "$(USE_PERLCRT)" != "define"
BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
version.lib
# win64 doesn't have some libs
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+EXTRACFLAGS = -nologo $(STRPOOL) -W3
+CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
#################### do not edit below this line #######################
############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+# Some dmake's built with Borland C++, including Sarathy's one at:
+# http://search.cpan.org/CPAN/authors/id/G/GS/GSAR/dmake-4.1pl1-win32.zip
+# require backslashes to be doubled-up when written to $(mktmp) files.
+# Other dmake's do not require this and would actually output a double
+# backslash if they were doubled-up.
+.IF "$(shell @type $(mktmp \\))"=="\\"
+B=\\
+.ELSE
+B=\\\
+.ENDIF
+
+# There is a related issue with other escape sequences: Sarathy's old
+# dmake automatically maps escape sequences like \n to their ASCII values
+# when used in macros, while other dmake's only do so if this behaviour
+# is explicitly requested with the :m modifier.
+DONTUSETHIS=\n
+.IF "$(shell @type $(mktmp \n))"=="\n"
+N=$(DONTUSETHIS:m)
+.ELSE
+N=$(DONTUSETHIS)
+.ENDIF
+
o *= .obj
a *= .lib
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
GLOBEXE = ..\perlglob.exe
-CONFIGPM = ..\lib\Config.pm
+CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+# Unicode data files generated by mktables
+UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
+ ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+ ..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
+ ..\lib\unicore\PVA.pl
+
+# Directories of Unicode data files generated by mktables
+UNIDATADIR1 = ..\lib\unicore\To
+UNIDATADIR2 = ..\lib\unicore\lib
+
PERLEXE_ICO = .\perlexe.ico
PERLEXE_RES = .\perlexe.res
PERLDLL_RES =
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\config_data \
+ ..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
..\utils\prove \
+ ..\utils\ptar \
+ ..\utils\ptardiff \
+ ..\utils\shasum \
..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
PERLIMPLIB *= ..\perl59$(a)
PERLDLL = ..\perl59.dll
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo
+XCOPY = xcopy /f /r /i /d /y
+RCOPY = xcopy /f /r /i /e /d /y
+NOOP = @rem
#
# filenames given to xsubpp must have forward slashes (since it puts
..\gv.c \
..\hv.c \
..\locale.c \
+ ..\mathoms.c \
..\mg.c \
..\numeric.c \
..\op.c \
..\perly.h \
..\pp.h \
..\proto.h \
+ ..\regcomp.h \
..\regexp.h \
..\scope.h \
..\sv.h \
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
- Unicode/Normalize Win32
-STATIC_EXT = DynaLoader
+ Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
+STATIC_EXT =
NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# trying to fit them all on the command line)
# -- BKS 10-17-1999
CFG_VARS = \
INST_DRV=$(INST_DRV) ~ \
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \
- INST_VER=$(INST_VER:s/\/\\/) ~ \
+ INST_TOP=$(INST_TOP:s,\,$B,) ~ \
+ INST_VER=$(INST_VER:s,\,$B,) ~ \
INST_ARCH=$(INST_ARCH) ~ \
archname=$(ARCHNAME) ~ \
cc=$(CC) ~ \
ld=$(LINK32) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
cf_email=$(EMAIL) ~ \
d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
libs=$(LIBFILES:f) ~ \
- incpath=$(CCINCDIR:s/\/\\/) ~ \
+ incpath=$(CCINCDIR:s,\,$B,) ~ \
libperl=$(PERLIMPLIB:f) ~ \
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
+ libpth=$(CCLIBDIR:s,\,$B,);$(EXTRALIBDIRS:s,\,$B,) ~ \
libc=$(LIBC) ~ \
make=dmake ~ \
_o=$(o) ~ \
usemultiplicity=$(USE_MULTI) ~ \
useperlio=$(USE_PERLIO) ~ \
uselargefiles=$(USE_LARGE_FILES) ~ \
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
+ usesitecustomize=$(USE_SITECUST) ~ \
+ LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
optimize=$(OPTIMIZE)
#
.IF "$(IS_WIN95)" == "define"
MK2 = .\makefile.95
RIGHTMAKE = __switch_makefiles
-NOOP = @rem
.ELSE
MK2 = __not_needed
RIGHTMAKE =
.ENDIF
+.IMPORT .IGNORE : SystemRoot windir
+
+# Don't just .IMPORT OS from the environment because dmake sets OS itself.
+ENV_OS=$(subst,OS=, $(shell @set OS))
+
+.IF "$(ENV_OS)" == "Windows_NT"
+ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
+.ELSE
+ODBCCP32_DLL = $(windir)\system\odbccp32.dll
+.ENDIF
+
#
# Top targets
#
all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
+ if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
+ cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,$B,))
.ENDIF
$(MINIDIR) :
$(X2P_OBJ) : $(CORE_H)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
$(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
+ $@,$N \
+ $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
+ perldll.def$N)
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--def perldll.def \
--base-file perl.base \
--output-exp perl.exp
$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
- perl.exp $(LKPOST))
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(LIBFILES) perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
+ @Extensions_static \
@$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
$(PERLEXE_ICO): $(MINIPERL) makeico.pl
$(MINIPERL) makeico.pl > $@
$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
$(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,$B,))
.ENDIF
perlmain.c : runperl.c
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(PERLIMPLIB) $(LIBFILES)$N)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
-# Note: The next two targets explicitly remove a "blibdirs.exists" file that
-# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
+Extensions_static : buildext.pl
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
Extensions_clean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
Extensions_realclean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
copy ..\README.irix ..\pod\perlirix.pod
copy ..\README.jp ..\pod\perljp.pod
copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.linux ..\pod\perllinux.pod
copy ..\README.machten ..\pod\perlmachten.pod
copy ..\README.macos ..\pod\perlmacos.pod
copy ..\README.macosx ..\pod\perlmacosx.pod
copy ..\README.mint ..\pod\perlmint.pod
copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.os2 ..\pod\perlos2.pod
copy ..\README.os390 ..\pod\perlos390.pod
copy ..\README.os400 ..\pod\perlos400.pod
copy ..\README.plan9 ..\pod\perlplan9.pod
copy ..\README.qnx ..\pod\perlqnx.pod
copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
-del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\Digest\SHA.pm
-del /f $(LIBDIR)\PerlIO\encoding.pm
-del /f $(LIBDIR)\PerlIO\scalar.pm
-del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
+ -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
-del /f $(LIBDIR)\Win32.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
- -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
- -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
- -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
- -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+ -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
+ -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
+ -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
- -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
- -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
- -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
- perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
- perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
- perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
- perlwin32.pod \
+ perljp.pod perlko.pod perllinux.pod perlmachten.pod \
+ perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
+ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+ perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
+ perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
+ perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove
+ xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
- -del /f $(PERLEXE_ICO)
- -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -del /f perllibst.h
+ -del /f $(PERLEXE_ICO) perl.base
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
- -if exist $(AUTODIR) rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
- -if exist $(COREDIR) rmdir /s $(COREDIR)
install : all installbare installhtml
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
+ if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+$(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
+ cd ..\lib\unicore && \
+ ..\$(MINIPERL) -I.. mktables
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
if exist ..\t\perl.exe del /f ..\t\perl.exe
rename ..\t\miniperl.exe perl.exe
.ENDIF
test : $(RIGHTMAKE) test-prep
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1 && \
- cd ..\t && $(PERLEXE) -I.\lib harness
+ cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
_test : $(RIGHTMAKE)
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
- cd ..\t && $(PERLEXE) -I..\lib harness
+ cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
_clean :
-@erase miniperlmain$(o)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
- -if exist $(MINIDIR) rmdir /s $(MINIDIR)
+ -if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
+ -if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
+ -@erase $(UNIDATAFILES)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
+ -@erase *.tds
+ -@erase Extensions_static
clean : Extensions_clean _clean
https://perl5.git.perl.org / perl5.git / blobdiff