# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Mon Feb 8 16:55:49 EET 1999 [metaconfig 3.0 PL70]
+# Generated on Wed Jul 28 20:32:22 EET DST 1999 [metaconfig 3.0 PL70]
# (with additional metaconfig patches by perlbug@perl.com)
cat >/tmp/c1$$ <<EOF
newsh=/usr/bin/bsh
fi
fi
+if test -f /osf_boot -a -f /usr/sbin/setld; then
+ if test X`/usr/bin/uname -s` = XOSF1; then
+ avoidksh="to avoid Digital UNIX' ksh"
+ newsh=/bin/sh
+ unset BIN_SH # if this is 'xpg4' sh will start up ksh
+ fi
+fi
case "$inksh/$needksh" in
/[a-z]*)
ENV=''
vi=''
zcat=''
zip=''
+full_ar=''
full_sed=''
libswanted=''
hint=''
cppminus=''
cpprun=''
cppstdin=''
+crosscompile=''
d_access=''
d_accessx=''
d_alarm=''
d_endpent=''
d_endpwent=''
d_endsent=''
+d_endspent=''
d_fchmod=''
d_fchown=''
d_fcntl=''
d_uname=''
d_gethostprotos=''
d_getlogin=''
+d_getmntent=''
d_getnbyaddr=''
d_getnbyname=''
d_getnent=''
d_getpwent=''
d_getsent=''
d_getservprotos=''
+d_getspent=''
+d_getspnam=''
d_getsbyname=''
d_getsbyport=''
d_gnulibc=''
+d_hasmntopt=''
d_htonl=''
d_inetaton=''
d_isascii=''
d_mblen=''
d_mbstowcs=''
d_mbtowc=''
+d_memchr=''
d_memcmp=''
d_memcpy=''
d_memmove=''
d_setruid=''
d_setsent=''
d_setsid=''
+d_setspent=''
d_setvbuf=''
d_sfio=''
usesfio=''
usedl=''
doublesize=''
ebcdic=''
+fflushNULL=''
+fflushall=''
fpostype=''
gidtype=''
groupstype=''
i_ndbm=''
i_netdb=''
i_neterrno=''
+i_netinettcp=''
i_niin=''
i_sysin=''
i_poll=''
+i_pthread=''
d_pwage=''
d_pwchange=''
d_pwclass=''
d_pwquota=''
i_pwd=''
i_sfio=''
+i_shadow=''
+i_socks=''
i_stddef=''
i_stdlib=''
i_string=''
i_varargs=''
i_varhdr=''
i_vfork=''
+installprefix=''
+installprefixexp=''
+installstyle=''
installusrbinperl=''
intsize=''
longsize=''
d_flock64_s=''
d_fstat64=''
d_ftruncate64=''
-d_ino64t=''
+d_ino64_t=''
+d_llseek=''
d_lockf64=''
d_lseek64=''
d_lstat64=''
-d_off64t=''
+d_off64_t=''
+d_offset_t=''
d_open64=''
d_opendir64=''
d_readdir64=''
d_telldir64=''
d_truncate64=''
libc=''
+ldlibpthname=''
libperl=''
shrpenv=''
useshrplib=''
small=''
split=''
modetype=''
+multiarch=''
mydomain=''
myhostname=''
phostname=''
selectminbits=''
selecttype=''
sh=''
+sig_count=''
sig_name=''
sig_name_init=''
sig_num=''
installsitelib=''
sitelib=''
sitelibexp=''
+siteprefix=''
+siteprefixexp=''
sizetype=''
so=''
sharpbang=''
d_ftell64=''
d_ftello64=''
d_tmpfile64=''
+d_stdio_stream_array=''
+stdio_stream_array=''
sysman=''
trnl=''
uidtype=''
runnm=''
usenm=''
useperlio=''
+usesocks=''
d_oldpthreads=''
usethreads=''
incpath=''
mips=''
mips_type=''
usrinc=''
+d_vendorlib=''
+installvendorlib=''
+vendorlib=''
+vendorlibexp=''
+usevendorprefix=''
+vendorprefix=''
+vendorprefixexp=''
defvoidused=''
voidflags=''
CONFIG=''
fi
i_whoami=''
-: change the next line if compiling for Xenix/286 on Xenix/386
-xlibpth='/usr/lib/386 /lib/386'
-
-: Possible local library directories to search.
-loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
-loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
-
-: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
-
-: Private path used by Configure to find libraries. Its value
-: is prepended to libpth. This variable takes care of special
-: machines, like the mips. Usually, it should be empty.
-plibpth=''
-
: Possible local include directories to search.
: Set locincpth to "" in a hint file to defeat local include searches.
locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
: Extra object files, if any, needed on this platform.
archobjs=''
groupstype=''
+: change the next line if compiling for Xenix/286 on Xenix/386
+xlibpth='/usr/lib/386 /lib/386'
+
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
+: general looking path for locating libraries
+glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
+glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+
+: Private path used by Configure to find libraries. Its value
+: is prepended to libpth. This variable takes care of special
+: machines, like the mips. Usually, it should be empty.
+plibpth=''
+
: default library list
libswanted=''
: some systems want to use only the non-versioned libso:s
: set useopcode=false in your hint file to disable the Opcode extension.
useopcode=true
: set usemultiplicity on the Configure command line to enable multiplicity.
+: set usesocks on the Configure command line to enable socks.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
libswanted='sfio socket inet nsl nm ndbm gdbm dbm db malloc dl'
-libswanted="$libswanted dld ld sun m c cposix posix ndir dir crypt"
+libswanted="$libswanted dld ld sun m rt c cposix posix"
+libswanted="$libswanted ndir dir crypt sec"
libswanted="$libswanted ucb bsd BSD PW x"
: We probably want to search /usr/shlib before most other libraries.
: This is only used by the lib/ExtUtils/MakeMaker.pm routine extliblist.
: Find the path to the source tree
case "$src" in
'') case "$0" in
- */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`;;
+ */*) src=`echo $0 | sed -e 's%/[^/][^/]*$%%'`
+ case "$src" in
+ /*) ;;
+ *) src=`cd ../$src && pwd` ;;
+ esac
+ ;;
*) src='.';;
esac;;
esac
: script used to extract .SH files with variable substitutions
cat >extract <<'EOS'
-CONFIG=true
+CONFIGDOTSH=true
echo "Doing variable substitutions on .SH files..."
if test -f $src/MANIFEST; then
set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH$'`
nm
nroff
pg
-tee
test
uname
zip
[23]100) osname=mips ;;
next*) osname=next ;;
i386*)
- if $test -f /etc/kconfig; then
+ tmp=`/bin/uname -X 2>/dev/null|awk '/3\.2v[45]/{ print $(NF) }'`
+ if $test "$tmp" != "" -a "$3" = "3.2" -a -f '/etc/systemid'; then
+ osname='sco'
+ osvers=$tmp
+ elif $test -f /etc/kconfig; then
osname=isc
- if test "$lns" = "ln -s"; then
+ if test "$lns" = "$ln -s"; then
osvers=4
elif $contains _SYSV3 /usr/include/stdio.h > /dev/null 2>&1 ; then
osvers=3
osvers=2
fi
fi
+ tmp=''
;;
pc*)
if test -n "$DJGPP"; then
You may give one or more space-separated answers, or "none" if appropriate.
A well-behaved OS will have no hints, so answering "none" or just "Policy"
-is a good thing. DO NOT give a wrong version.
+is a good thing. DO NOT give a wrong version or a wrong OS.
EOM
Perl can be built to take advantage of threads, on some systems.
To do so, Configure must be run with -Dusethreads.
-(See README.threads for details.)
+
+Note that threading is a highly experimental feature, and
+some known race conditions still remain. If you choose to try
+it, be very sure to not actually deploy it for production
+purposes. README.threads has more details, and is required
+reading if you enable threads.
EOM
case "$usethreads" in
$define|true|[yY]*) dflt='y';;
. ./usethreads.cbu
fi
case "$osname" in
- aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|os2|solaris|vmesa)
+ aix|dec_osf|dos_djgpp|freebsd|hpux|irix|linux|next|openbsd|os2|solaris|vmesa)
# Known thread-capable platforms.
;;
*)
case "$use64bits" in
"$define"|true|[yY]*)
: Look for a hint-file generated 'call-back-unit'. If the
-: user has specified that a threading perl is to be built,
+: user has specified that a 64 bit perl is to be built,
: we may need to set or change some other defaults.
if $test -f use64bits.cbu; then
. ./use64bits.cbu
fi
case "$osname" in
- dec_osf|hpux|irix|solaris|unicos)
+ aix|dec_osf|hpux|irix|solaris|unicos)
# Known 64-bit capable platforms.
;;
*)
esac
esac
-: is AFS running?
-echo " "
-case "$afs" in
-$define|true) afs=true ;;
-$undef|false) afs=false ;;
-*) if test -d /afs; then
- afs=true
- else
- afs=false
- fi
- ;;
-esac
-if $afs; then
- echo "AFS may be running... I'll be extra cautious then..." >&4
-else
- echo "AFS does not seem to be running..." >&4
-fi
-
: decide how portable to be. Allow command line overrides.
case "$d_portable" in
"$undef") ;;
nopath_ok=''
orig_rp="$rp"
orig_dflt="$dflt"
+case "$gfpth" in
+'') gfpth='.' ;;
+esac
case "$fn" in
*\(*)
'')
case "$type" in
File)
- if test -f "$ansexp"; then
- type=''
- elif test -r "$ansexp" || (test -h "$ansexp") >/dev/null 2>&1
- then
- echo "($value is not a plain file, but that's ok.)"
- type=''
- fi
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -f "$pf"; then
+ type=''
+ elif test -r "$pf" || (test -h "$pf") >/dev/null 2>&1
+ then
+ echo "($value is not a plain file, but that's ok.)"
+ type=''
+ fi
+ if test X"$type" = X; then
+ value="$pf"
+ break
+ fi
+ done
;;
Directory)
- if test -d "$ansexp"; then
- type=''
- fi
+ for fp in $gfpth; do
+ if test "X$fp" = X.; then
+ pf="$ansexp"
+ else
+ pf="$fp/$ansexp"
+ fi
+ if test -d "$pf"; then
+ type=''
+ value="$pf"
+ break
+ fi
+ done
;;
Locate)
if test -d "$ansexp"; then
rp="$orig_rp"
dflt="$orig_dflt"
rm -f getfile.ok
+test "X$gfpthkeep" != Xy && gfpth=""
EOSC
: determine root of directory hierarchy where package will be installed.
esac
$cat <<EOM
-By default, $package will be installed in $dflt/bin, manual
-pages under $dflt/man, etc..., i.e. with $dflt as prefix for
-all installation directories. Typically set to /usr/local, but you
-may choose /usr if you wish to install $package among your system
-binaries. If you wish to have binaries under /bin but manual pages
-under /usr/local/man, that's ok: you will be prompted separately
-for each of the installation directories, the prefix being only used
-to set the defaults.
+By default, $package will be installed in $dflt/bin, manual pages
+under $dflt/man, etc..., i.e. with $dflt as prefix for all
+installation directories. Typically this is something like /usr/local.
+If you wish to have binaries under /usr/bin but other parts of the
+installation under /usr/local, that's ok: you will be prompted
+separately for each of the installation directories, the prefix being
+only used to set the defaults.
EOM
fn=d~
prefix="$ans"
prefixexp="$ansexp"
+: is AFS running?
+echo " "
+case "$afs" in
+$define|true) afs=true ;;
+$undef|false) afs=false ;;
+*) if test -d /afs; then
+ afs=true
+ else
+ afs=false
+ fi
+ ;;
+esac
+if $afs; then
+ echo "AFS may be running... I'll be extra cautious then..." >&4
+else
+ echo "AFS does not seem to be running..." >&4
+fi
+
+: determine installation prefix for where package is to be installed.
+if $afs; then
+$cat <<EOM
+
+Since you are running AFS, I need to distinguish the directory in which
+files will reside from the directory in which they are installed (and from
+which they are presumably copied to the former directory by occult means).
+
+EOM
+ case "$installprefix" in
+ '') dflt=`echo $prefix | sed 's#^/afs/#/afs/.#'`;;
+ *) dflt="$installprefix";;
+ esac
+else
+$cat <<EOM
+
+In some special cases, particularly when building $package for distribution,
+it is convenient to distinguish between the directory in which files should
+be installed from the directory ($prefix) in which they
+will eventually reside. For most users, these two directories are the same.
+
+EOM
+ case "$installprefix" in
+ '') dflt=$prefix ;;
+ *) dflt=$installprefix;;
+ esac
+fi
+fn=d~
+rp='What installation prefix should I use for installing files?'
+. ./getfile
+installprefix="$ans"
+installprefixexp="$ansexp"
+
: set the prefixit variable, to compute a suitable default value
prefixit='case "$3" in
""|none)
echo " "
echo "Getting the current patchlevel..." >&4
if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+ patchlevel=`awk '/define[ ]+PERL_VERSION/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+PERL_SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
else
patchlevel=0
subversion=0
apiversion="$version"
fi
+: determine installation style
+: For now, try to deduce it from prefix unless it is already set.
+: Reproduce behavior of 5.005 and earlier, maybe drop that in 5.7.
+case "$installstyle" in
+'') case "$prefix" in
+ *perl*) dflt='lib';;
+ *) dflt='lib/perl5' ;;
+ esac
+ ;;
+*) dflt='lib/perl5' ;;
+esac
+: Probably not worth prompting for this since we prompt for all
+: the directories individually, and the prompt would be too long and
+: confusing anyway.
+installstyle=$dflt
+
: determine where private library files go
: Usual default is /usr/local/lib/perl5/$version.
: Also allow things like /opt/perl/lib/$version, since
: /opt/perl/lib/perl5... would be redundant.
-case "$prefix" in
-*perl*) set dflt privlib lib/$version ;;
-*) set dflt privlib lib/$package/$version ;;
+: The default "style" setting is made in installstyle.U
+case "$installstyle" in
+*lib/perl5*) set dflt privlib lib/$package/$version ;;
+*) set dflt privlib lib/$version ;;
esac
eval $prefixit
$cat <<EOM
fn=d~+
rp='Pathname where the private library files will reside?'
. ./getfile
-if $test "X$privlibexp" != "X$ansexp"; then
- installprivlib=''
-fi
privlib="$ans"
privlibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-private files reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installprivlib" in
- '') dflt=`echo $privlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installprivlib";;
- esac
- fn=de~
- rp='Where will private files be installed?'
- . ./getfile
- installprivlib="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installprivlib=`echo $privlibexp | sed 's#^$prefix#$installprefix#'`
else
installprivlib="$privlibexp"
fi
*) dflt="$archlib"
;;
esac
-cat <<EOM
+$cat <<EOM
$spackage contains architecture-dependent library files. If you are
sharing libraries in a heterogeneous environment, you might store
. ./getfile
archlib="$ans"
archlibexp="$ansexp"
-
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which architecture-dependent library files reside from the directory
-in which they are installed (and from which they are presumably copied
-to the former directory by occult means).
-
-EOM
- case "$installarchlib" in
- '') dflt=`echo $archlibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installarchlib";;
- esac
- fn=de~
- rp='Where will architecture-dependent library files be installed?'
- . ./getfile
- installarchlib="$ans"
-else
- installarchlib="$archlibexp"
-fi
if $test X"$archlib" = X"$privlib"; then
d_archlib="$undef"
else
d_archlib="$define"
fi
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installarchlib=`echo $archlibexp | sed 's#^$prefix#$installprefix#'`
+else
+ installarchlib="$archlibexp"
+fi
: make some quick guesses about what we are up against
echo " "
exit(0);
}
EOM
-if $cc -o gccvers gccvers.c >/dev/null 2>&1; then
+if $cc -o gccvers gccvers.c; then
gccversion=`./gccvers`
case "$gccversion" in
'') echo "You are not using GNU cc." ;;
'') firstmakefile='makefile';;
esac
+cat <<EOM
+
+Perl can be built to use the SOCKS proxy protocol library. To do so,
+Configure must be run with -Dusesocks.
+
+Normally you do not need this and you should answer no.
+
+EOM
+case "$usesocks" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Build Perl for SOCKS?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usesocks
+eval $setvar
+
: Looking for optional libraries
echo " "
echo "Checking for optional libraries..." >&4
case "$libswanted" in
'') libswanted='c_s';;
esac
+case "$usesocks" in
+$define)
+ libswanted="$libswanted socks5 socks5_sh"
+ ;;
+esac
for thislib in $libswanted; do
if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
esac
$cat <<EOM
-
-Some versions of Unix support shared libraries, which make executables smaller
-but make load time slightly longer.
-
-On some systems, mostly System V Release 3's, the shared library is included
-by putting the option "-lc_s" as the last thing on the cc command line when
-linking. Other systems use shared libraries by default. There may be other
-libraries needed to compile $package on your machine as well. If your system
-needs the "-lc_s" option, include it here. Include any other special libraries
-here as well. Say "none" for none.
+
+In order to compile $package on your machine, a number of libraries
+are usually needed. Include any other special libraries here as well.
+Say "none" for none. The default list is almost always right.
EOM
echo " "
-rp="Any additional libraries?"
+rp="What libraries to use?"
. ./myread
case "$ans" in
none) libs=' ';;
esac;
fi'
-if ./osf1; then
- set signal.h __LANGUAGE_C__; eval $inctest
-else
- set signal.h LANGUAGE_C; eval $inctest
-fi
+set signal.h LANGUAGE_C; eval $inctest
+
+case "$usesocks" in
+$define)
+ ccflags="$ccflags -DSOCKS"
+ ;;
+esac
case "$hint" in
none|recommended) dflt="$ccflags $dflt" ;;
$startsh
wanted=\$1
name=''
-if test -f $usrinc/\$wanted; then
- echo "$usrinc/\$wanted"
- exit 0
-fi
+for usrincdir in $usrinc
+do
+ if test -f \$usrincdir/\$wanted; then
+ echo "\$usrincdir/\$wanted"
+ exit 0
+ fi
+done
awkprg='{ print \$$fieldn }'
echo "#include <\$wanted>" > foo\$\$.c
$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
while read cline; do
name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
case "\$name" in
- */\$wanted) echo "\$name"; exit 0;;
- *) name='';;
+ *[/\\\\]\$wanted) echo "\$name"; exit 1;;
+ *[\\\\/]\$wanted) echo "\$name"; exit 1;;
+ *) exit 2;;
esac;
done;
+#
+# status = 0: grep returned 0 lines, case statement not executed
+# status = 1: headerfile found
+# status = 2: while loop executed, no headerfile found
+#
+status=\$?
$rm -f foo\$\$.c;
-case "\$name" in
-'') exit 1;;
-esac
+if test \$status -eq 1; then
+ exit 0;
+fi
+exit 1
EOF
chmod +x findhdr
+
: define an alternate in-header-list? function
inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
cont=true; xxf="echo \"<\$1> found.\" >&4";
esac
echo "Your system uses $freetype free(), it would seem." >&4
$rm -f malloc.[co]
+$cat <<EOM
+
+The installation process will also create a directory for
+vendor-supplied add-ons. Vendors who supply perl with their system
+may find it convenient to place all vendor-supplied files in this
+directory rather than in the main distribution directory. This will
+ease upgrades between binary-compatible maintenance versions of perl.
+
+Of course you may also use these directories in whatever way you see
+fit. For example, you might use them to access modules shared over a
+company-wide network.
+
+The default answer should be fine for most people.
+This causes further questions about vendor add-ons to be skipped
+and no vendor-specific directories will be configured for perl.
+
+EOM
+rp='Do you want to configure vendor-specific add-on directories?'
+case "$usevendorprefix" in
+define|true|[yY]*) dflt=y ;;
+*) dflt=n ;;
+esac
+. ./myread
+case "$ans" in
+[yY]*) fn=d~+
+ rp='Installation prefix to use for vendor-supplied add-ons?'
+ case "$vendorprefix" in
+ '') dflt='' ;;
+ *) dflt=$vendorprefix ;;
+ esac
+ . ./getfile
+ oldvendorprefix=''
+ case "$vendorprefix" in
+ '') ;;
+ *) case "$ans" in
+ "$prefix") ;;
+ *) oldvendorprefix="$prefix";;
+ esac
+ ;;
+ esac
+ usevendorprefix="$define"
+ vendorprefix="$ans"
+ vendorprefixexp="$ansexp"
+ ;;
+*) usevendorprefix="$undef"
+ vendorprefix=''
+ vendorprefixexp=''
+ ;;
+esac
+
+case "$vendorprefix" in
+'') d_vendorlib="$undef"
+ vendorlib=''
+ vendorlibexp=''
+ ;;
+*) d_vendorlib="$define"
+ : determine where vendor-supplied modules go.
+ : Usual default is /usr/local/lib/perl5/vendor_perl
+ prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+ case "$installstyle" in
+ *lib/perl5*) dflt=$vendorprefix/lib/$package/vendor_$prog ;;
+ *) dflt=$vendorprefix/lib/vendor_$prog ;;
+ esac
+ fn=d~+
+ rp='Pathname for the vendor-supplied library files?'
+ . ./getfile
+ vendorlib="$ans"
+ vendorlibexp="$ansexp"
+ : Change installation prefix, if necessary.
+ if $test X"$prefix" != X"$installprefix"; then
+ installvendorlib=`echo $vendorlibexp | $sed 's#^$prefix#$installprefix#'`
+ else
+ installvendorlib="$vendorlibexp"
+ fi
+ ;;
+esac
+
: Cruising for prototypes
echo " "
echo "Checking out function prototypes..." >&4
fi
bin="$ans"
binexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-executables reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installbin" in
- '') dflt=`echo $binexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installbin";;
- esac
- fn=de~
- rp='Where will public executables be installed?'
- . ./getfile
- installbin="$ans"
+: Change installation prefix, if necessary.
+: XXX Bug? -- ignores Configure -Dinstallprefix setting.
+if $test X"$prefix" != X"$installprefix"; then
+ installbin=`echo $binexp | sed 's#^$prefix#$installprefix#'`
else
installbin="$binexp"
fi
: determine whether to install perl also as /usr/bin/perl
echo " "
-if test -d /usr/bin -a "X$installbin" != X/usr/bin; then
+if $test -d /usr/bin -a "X$installbin" != X/usr/bin; then
$cat <<EOM
Many scripts expect to perl to be installed as /usr/bin/perl.
I can install the perl you are about to compile also as /usr/bin/perl
if $test -f /lib/syscalls.exp; then
echo " "
echo "Also extracting names from /lib/syscalls.exp for good ole AIX..." >&4
- $sed -n 's/^\([^ ]*\)[ ]*syscall$/\1/p' /lib/syscalls.exp >>libc.list
+ $sed -n 's/^\([^ ]*\)[ ]*syscall[0-9]*$/\1/p' /lib/syscalls.exp >>libc.list
fi
;;
esac
tdir=`pwd`; cd $rsrc; $ls -C $dldir/dl*.xs; cd $tdir
rp="Source file to use for dynamic loading"
fn="fne"
- # XXX This getfile call will fail the existence check if you try
- # building away from $src (this is not supported yet).
+ gfpth="$src"
. ./getfile
usedl="$define"
: emulate basename
. ./myread
case "$ans" in
true|$define|[Yy]*)
- useshrplib='true'
- # Why does next4 have to be so different?
- case "${osname}${osvers}" in
- next4*) xxx='DYLD_LIBRARY_PATH' ;;
- os2*) xxx='' ;; # Nothing special needed.
- beos*) xxx='' ;;
- *) xxx='LD_LIBRARY_PATH' ;;
- esac
- if test X"$xxx" != "X"; then
- $cat <<EOM | $tee -a ../config.msg >&4
-
-To build perl, you must add the current working directory to your
-$xxx environment variable before running make. You can do
-this with
- $xxx=\`pwd\`:\$$xxx; export $xxx
-for Bourne-style shells, or
- setenv $xxx \`pwd\`
-for Csh-style shells. You *MUST* do this before running make.
-
-EOM
- fi
- ;;
+ useshrplib='true' ;;
*) useshrplib='false' ;;
esac
;;
beos)
# beos doesn't like the default, either.
;;
+ hpux*)
+ # hpux doesn't like the default, either.
+ tmp_shrpenv="env LDOPTS=\"+s +b${shrpdir}\""
+ ;;
*)
tmp_shrpenv="env LD_RUN_PATH=$shrpdir"
;;
;;
esac
fi
+# Fix ccdlflags in AIX for building external extensions.
+# (For building Perl itself bare -bE:perl.exp is needed,
+# Makefile.SH takes care of this.)
+case "$osname" in
+aix) ccdlflags="$ccdlflags -bE:$installarchlib/CORE/perl.exp" ;;
+esac
# Respect a hint or command-line value.
case "$shrpenv" in
'') shrpenv="$tmp_shrpenv" ;;
esac
+case "$ldlibpthname" in
+'') ldlibpthname=LD_LIBRARY_PATH ;;
+none) ldlibpthname='' ;;
+esac
: determine where manual pages go
set man1dir man1dir none
man1dir="$ans"
man1direxp="$ansexp"
case "$man1dir" in
-'') man1dir=' '
+'') man1dir=' '
installman1dir='';;
esac
-if $afs; then
- $cat <<EOM
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-
-EOM
- case "$installman1dir" in
- '') dflt=`echo $man1direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman1dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman1dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman1dir=`echo $man1direxp | $sed 's#^$prefix#$installprefix#'`
else
installman1dir="$man1direxp"
fi
echo "If you don't want the manual sources installed, answer 'none'."
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
case "$man3dir" in
-'') case "$prefix" in
- *$prog*) dflt=`echo $man1dir |
- $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'` ;;
- *) dflt="$privlib/man/man3" ;;
- esac
+'') dflt=`echo $man1dir | $sed -e 's/man1/man3/g' -e 's/man\.1/man\.3/g'`
+ if $test -d "$privlib/man/man3"; then
+ cat <<EOM >&4
+
+WARNING: Previous versions of perl installed man3 pages into
+$privlib/man/man3. This version will suggest a
+new default of $dflt.
+EOM
+ tdflt=$dflt
+ dflt='n'
+ rp='Do you wish to preserve the old behavior?(y/n)'
+ . ./myread
+ case "$ans" in
+ y*) dflt="$privlib/man/man3" ;;
+ *) dflt=$tdflt ;;
+ esac
+ fi
;;
' ') dflt=none;;
*) dflt="$man3dir" ;;
esac
echo " "
-
fn=dn+~
rp="Where do the $package library man pages (source) go?"
. ./getfile
-if test "X$man3direxp" != "X$ansexp"; then
- installman3dir=''
-fi
-
man3dir="$ans"
man3direxp="$ansexp"
-case "$man3dir" in
-'') man3dir=' '
+case "$man1dir" in
+'') man3dir=' '
installman3dir='';;
esac
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in which
-manual pages reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
-EOM
- case "$installman3dir" in
- '') dflt=`echo $man3direxp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installman3dir";;
- esac
- fn=de~
- rp='Where will man pages be installed?'
- . ./getfile
- installman3dir="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installman3dir=`echo $man3direxp | $sed 's#^$prefix#$installprefix#'`
else
installman3dir="$man3direxp"
fi
: What suffix to use on installed man pages
-
case "$man3dir" in
' ')
man3ext='0'
dflt="$bin"
: guess some guesses
$test -d /usr/share/scripts && dflt=/usr/share/scripts
- $test -d /usr/share/bin && dflt=/usr/share/bin
- $test -d /usr/local/script && dflt=/usr/local/script
- $test -d $prefixexp/script && dflt=$prefixexp/script
+ $test -d /usr/share/bin && dflt=/usr/share/bin
+ $test -d /usr/local/script && dflt=/usr/local/script
+ $test -d /usr/local/scripts && dflt=/usr/local/scripts
+ $test -d $prefixexp/script && dflt=$prefixexp/script
set dflt
eval $prefixup
;;
fi
scriptdir="$ans"
scriptdirexp="$ansexp"
-if $afs; then
- $cat <<EOM
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installscript=`echo $scriptdirexp | sed 's#^$prefix#$installprefix#'`
+else
+ installscript="$scriptdirexp"
+fi
-Since you are running AFS, I need to distinguish the directory in which
-scripts reside from the directory in which they are installed (and from
-which they are presumably copied to the former directory by occult means).
+$cat <<EOM
+
+After $package is installed, you may wish to install various
+add-on modules and utilities. Typically, these add-ons will
+be installed under $prefix with the rest
+of this package. However, you may wish to install such add-ons
+elsewhere under a different prefix.
+
+If you do not wish to put everything under a single prefix, that's
+ok. You will be prompted for the individual locations; this siteprefix
+is only used to suggest the defaults.
+
+The default should be fine for most people.
EOM
- case "$installscript" in
- '') dflt=`echo $scriptdirexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installscript";;
+fn=d~+
+rp='Installation prefix to use for add-on modules and utilities?'
+: XXX Here might be another good place for an installstyle setting.
+case "$siteprefix" in
+'') dflt=$prefix ;;
+*) dflt=$siteprefix ;;
+esac
+. ./getfile
+oldsiteprefix=''
+case "$siteprefix" in
+'') ;;
+*)
+ case "$ans" in
+ "$prefix") ;;
+ *) oldsiteprefix="$prefix";;
esac
- fn=de~
- rp='Where will public scripts be installed?'
- . ./getfile
- installscript="$ans"
-else
- installscript="$scriptdirexp"
-fi
+ ;;
+esac
+siteprefix="$ans"
+siteprefixexp="$ansexp"
: determine where site specific libraries go.
-: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
+: Usual default is /usr/local/lib/perl5/site_perl
+: The default "style" setting is made in installstyle.U
+: XXX No longer works with Prefixit stuff.
prog=`echo $package | $sed 's/-*[0-9.]*$//'`
-case "$prefix" in
-*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
-*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
+case "$installstyle" in
+*lib/perl5*) dflt=$siteprefix/lib/site_$prog ;;
+*) dflt=$siteprefix/lib/site_$prog ;;
esac
-eval $prefixit
$cat <<EOM
-The installation process will also create a directory for
-site-specific extensions and modules. Some users find it convenient
-to place all local files in this directory rather than in the main
-distribution directory.
+The installation process will create a directory for
+site-specific extensions and modules. Most users find it convenient
+to place all site-specific files in this directory rather than in the
+main distribution directory.
EOM
fn=d~+
rp='Pathname for the site-specific library files?'
. ./getfile
-if $test "X$sitelibexp" != "X$ansexp"; then
- installsitelib=''
-fi
sitelib="$ans"
sitelibexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which site-specific files reside from the directory in which they are
-installed (and from which they are presumably copied to the former
-directory by occult means).
-
-EOM
- case "$installsitelib" in
- '') dflt=`echo $sitelibexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitelib";;
- esac
- fn=de~
- rp='Where will site-specific files be installed?'
- . ./getfile
- installsitelib="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitelib=`echo $sitelibexp | sed 's#^$prefix#$installprefix#'`
else
installsitelib="$sitelibexp"
fi
: determine where site specific architecture-dependent libraries go.
-: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
+: sitelib default is /usr/local/lib/perl5/site_perl/
: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
: sitelib may have an optional trailing /share.
tdflt=`echo $sitelib | $sed 's,/share$,,'`
-tdflt="$tdflt/$archname"
+tdflt="$tdflt/$apiversion/$archname"
set sitearch sitearch none
eval $prefixit
case "$sitearch" in
fn=nd~+
rp='Pathname for the site-specific architecture-dependent library files?'
. ./getfile
-if $test "X$sitearchexp" != "X$ansexp"; then
- installsitearch=''
-fi
sitearch="$ans"
sitearchexp="$ansexp"
-if $afs; then
- $cat <<EOM
-
-Since you are running AFS, I need to distinguish the directory in
-which site-specific architecture-dependent library files reside from
-the directory in which they are installed (and from which they are
-presumably copied to the former directory by occult means).
-
-EOM
- case "$installsitearch" in
- '') dflt=`echo $sitearchexp | sed 's#^/afs/#/afs/.#'`;;
- *) dflt="$installsitearch";;
- esac
- fn=de~
- rp='Where will site-specific architecture-dependent files be installed?'
- . ./getfile
- installsitearch="$ans"
+: Change installation prefix, if necessary.
+if $test X"$prefix" != X"$installprefix"; then
+ installsitearch=`echo $sitearchexp | sed 's#^$prefix#$installprefix#'`
else
installsitearch="$sitearchexp"
fi
shift 2;
done > try.c;
echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
-if eval $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
val="$define";
else
val="$undef";
set lockf64 d_lockf64
eval $inlibc
+ : see if llseek exists
+ set llseek d_llseek
+ eval $inlibc
+
: see if lseek64 exists
set lseek64 d_lseek64
eval $inlibc
echo $n "Checking to see if your system supports off64_t...$c" >&4
$cat >try.c <<EOCP
#include <sys/types.h>
+#include <unistd.h>
off64_t foo() { off64_t x; x = 7; return x; }'
EOCP
if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
echo " Nope, it doesn't." >&4
fi
$rm -f try.*
- set d_off64t
+ set d_off64_t
+ eval $setvar
+
+ : check for offset_t
+ echo " "
+ echo $n "Checking to see if your system supports offset_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <unistd.h>
+offset_t foo() { offset_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ set d_offset_t
eval $setvar
: check for ino64_t
else
echo " Nope, it doesn't." >&4
fi
- set d_ino64t
+ set d_ino64_t
eval $setvar
: check for struct flock64
else
val="$undef"
- for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64t d_ino64t d_flock64_s d_dirent64_s
+ for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64_t d_offset_t d_ino64_t d_flock64_s d_dirent64_s
do
set $xxx
eval $setvar
set endservent d_endsent
eval $inlibc
+: see if endspent exists
+set endspent d_endspent
+eval $inlibc
+
: Locate the flags for 'open()'
echo " "
$cat >open3.c <<'EOCP'
: see how we will look up host name
echo " "
-if false; then
- : dummy stub to allow use of elif
-elif set gethostname val -f d_gethname; eval $csym; $val; then
+call=''
+if set gethostname val -f d_gethname; eval $csym; $val; then
echo 'gethostname() found.' >&4
d_gethname="$define"
call=gethostname
-elif set uname val -f d_uname; eval $csym; $val; then
+fi
+if set uname val -f d_uname; eval $csym; $val; then
if ./xenix; then
$cat <<'EOM'
uname() was found, but you're running xenix, and older versions of xenix
else
echo 'uname() found.' >&4
d_uname="$define"
- call=uname
+ case "$call" in
+ '') call=uname ;;
+ esac
fi
fi
case "$d_gethname" in
set getlogin d_getlogin
eval $inlibc
+: see if getmntent exists
+set getmntent d_getmntent
+eval $inlibc
+
: see if getnetbyaddr exists
set getnetbyaddr d_getnbyaddr
eval $inlibc
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
+: see if getspent exists
+set getspent d_getspent
+eval $inlibc
+
+: see if getspnam exists
+set getspnam d_getspnam
+eval $inlibc
+
: see if gettimeofday or ftime exists
set gettimeofday d_gettimeod
eval $inlibc
;;
esac
+: see if hasmntopt exists
+set hasmntopt d_hasmntopt
+eval $inlibc
+
: see if this is a netinet/in.h or sys/in.h system
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
set mbtowc d_mbtowc
eval $inlibc
+: see if memchr exists
+set memchr d_memchr
+eval $inlibc
+
: see if memcmp exists
set memcmp d_memcmp
eval $inlibc
set nice d_nice
eval $inlibc
-: how to create joinable pthreads
+: see if POSIX threads are available
if test "X$usethreads" = "X$define"; then
+ set pthread.h i_pthread
+ eval $inhdr
+else
+ i_pthread="$undef"
+fi
+
+
+
+: how to create joinable pthreads
+if test "X$usethreads" = "X$define" -a "X$i_pthread" = "X$define"; then
echo " "
echo "Checking what constant to use for creating joinable pthreads..." >&4
$cat >try.c <<'EOCP'
EOCP
set try -DJOINABLE=PTHREAD_CREATE_JOINABLE
if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_JOINABLE." >&2
+ echo "You seem to use PTHREAD_CREATE_JOINABLE." >&4
val="$undef" # Yes, undef.
set d_old_pthread_create_joinable
eval $setvar
else
set try -DJOINABLE=PTHREAD_CREATE_UNDETACHED
if eval $compile; then
- echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&2
+ echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
else
set try -DJOINABLE=__UNDETACHED
if eval $compile; then
- echo "You seem to use __UNDETACHED." >&2
+ echo "You seem to use __UNDETACHED." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
set old_pthread_create_joinable
eval $setvar
else
- echo "Egads, nothing obvious found. Guessing that you use 0." >&2
+ echo "Egads, nothing obvious found. Guessing that you use 0." >&4
val="$define"
set d_old_pthread_create_joinable
eval $setvar
set setsid d_setsid
eval $inlibc
+: see if setspent exists
+set setspent d_setspent
+eval $inlibc
+
: see if setvbuf exists
set setvbuf d_setvbuf
eval $inlibc
: see if _ptr and _cnt from stdio act std
echo " "
-if $contains '_IO_fpos_t' `./findhdr stdio.h` >/dev/null 2>&1 ; then
+if $contains '_IO_fpos_t' `./findhdr stdio.h` `./findhdr libio.h` >/dev/null 2>&1 ; then
echo "(Looks like you have stdio.h from Linux.)"
case "$stdio_ptr" in
'') stdio_ptr='((fp)->_IO_read_ptr)'
set d_stdiobase
eval $setvar
+$cat >&4 <<EOM
+Checking how to access stdio streams by file descriptor number...
+EOM
+case "$stdio_stream_array" in
+'') $cat >try.c <<EOCP
+#include <stdio.h>
+int main() {
+ if (&STDIO_STREAM_ARRAY[fileno(stdin)] == stdin)
+ printf("yes\n");
+}
+EOCP
+ for s in _iob __iob __sF
+ do
+ set try -DSTDIO_STREAM_ARRAY=$s
+ if eval $compile; then
+ case "`./try$exe_ext`" in
+ yes) stdio_stream_array=$s; break ;;
+ esac
+ fi
+ done
+ $rm -f try.* try$exe_ext
+esac
+case "$stdio_stream_array" in
+'') $cat >&4 <<EOM
+I can't figure out how to access stdio streams by file descriptor number.
+EOM
+ d_stdio_stream_array="$undef"
+ ;;
+*) $cat >&4 <<EOM
+You can access stdio streams by file descriptor number by the $stdio_stream_array array.
+EOM
+ d_stdio_stream_array="$define"
+ ;;
+esac
+
: see if strcoll exists
set strcoll d_strcoll
eval $inlibc
false) dflt='n';;
*) dflt='y';;
esac
- rp="Some systems have problems with vfork(). Do you want to use it?"
+ cat <<'EOM'
+
+Perl can only use a vfork() that doesn't suffer from strict
+restrictions on calling functions or modifying global data in
+the child. For example, glibc-2.1 contains such a vfork()
+that is unsuitable. If your system provides a proper fork()
+call, chances are that you do NOT want perl to use vfork().
+
+EOM
+ rp="Do you still want to use vfork()?"
. ./myread
case "$ans" in
y|Y) ;;
RCSfile='$RCSfile'
Revision='$Revision'
+case "$crosscompile" in
+''|[nN]*) crosscompile="$undef" ;;
+esac
+
+case "$osname" in
+next|rhapsody) multiarch="$define" ;;
+esac
+case "$multiarch" in
+''|[nN]*) multiarch="$undef" ;;
+esac
+
: check for alignment requirements
echo " "
-case "$alignbytes" in
-'') echo "Checking alignment constraints..." >&4
- $cat >try.c <<'EOCP'
+case "$crosscompile$multiarch" in
+*$define*)
+ $cat <<EOM
+You seem to be either cross-compiling or doing a multiarchitecture build,
+skipping the memory alignment check.
+
+EOM
+ case "$alignbytes" in
+ '') alignbytes=8 ;;
+ esac
+ ;;
+*)
+ case "$alignbytes" in
+ '') echo "Checking alignment constraints..." >&4
+ $cat >try.c <<'EOCP'
struct foobar {
char foo;
double bar;
-} try;
+} try_algn;
int main()
{
- printf("%d\n", (char *)&try.bar - (char *)&try.foo);
+ printf("%d\n", (char *)&try_algn.bar - (char *)&try_algn.foo);
}
EOCP
- set try
- if eval $compile_ok; then
- dflt=`./try`
- else
- dflt='8'
- echo "(I can't seem to compile the test program...)"
- fi
- ;;
-*) dflt="$alignbytes"
+ set try
+ if eval $compile_ok; then
+ dflt=`./try`
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program...)"
+ fi
+ ;;
+ *) dflt="$alignbytes"
+ ;;
+ esac
+ rp="Doubles must be aligned on a how-many-byte boundary?"
+ . ./myread
+ alignbytes="$ans"
+ $rm -f try.c try
;;
esac
-rp="Doubles must be aligned on a how-many-byte boundary?"
-. ./myread
-alignbytes="$ans"
-$rm -f try.c try
+
: check for ordering of bytes in a long
-case "$byteorder" in
-'')
- $cat <<'EOM'
-
+echo " "
+case "$crosscompile$multiarch" in
+*$define*)
+ $cat <<EOM
+You seem to be either cross-compiling or doing a multiarchitecture build,
+skipping the byteorder check.
+
+EOM
+ byteorder=''
+ ;;
+*)
+ case "$byteorder" in
+ '')
+ $cat <<'EOM'
In the following, larger digits indicate more significance. A big-endian
machine like a Pyramid or a Motorola 680?0 chip will come out to 4321. A
little-endian machine like a Vax or an Intel 80?86 chip would be 1234. Other
the test program works the default is probably right.
I'm now running the test program...
EOM
- $cat >try.c <<'EOCP'
+ $cat >try.c <<'EOCP'
#include <stdio.h>
int main()
{
exit(0);
}
EOCP
- xxx_prompt=y
- set try
- if eval $compile && ./try > /dev/null; then
- dflt=`./try`
- case "$dflt" in
- [1-4][1-4][1-4][1-4]|12345678|87654321)
- echo "(The test program ran ok.)"
- echo "byteorder=$dflt"
- xxx_prompt=n
+ xxx_prompt=y
+ set try
+ if eval $compile && ./try > /dev/null; then
+ dflt=`./try`
+ case "$dflt" in
+ [1-4][1-4][1-4][1-4]|12345678|87654321)
+ echo "(The test program ran ok.)"
+ echo "byteorder=$dflt"
+ xxx_prompt=n
;;
- ????|????????) echo "(The test program ran ok.)" ;;
- *) echo "(The test program didn't run right for some reason.)" ;;
- esac
- else
- dflt='4321'
- cat <<'EOM'
+ ????|????????) echo "(The test program ran ok.)" ;;
+ *) echo "(The test program didn't run right for some reason.)" ;;
+ esac
+ else
+ dflt='4321'
+ cat <<'EOM'
(I can't seem to compile the test program. Guessing big-endian...)
EOM
- fi
- case "$xxx_prompt" in
- y)
- rp="What is the order of bytes in a long?"
- . ./myread
- byteorder="$ans"
- ;;
- *) byteorder=$dflt
+ fi
+ case "$xxx_prompt" in
+ y)
+ rp="What is the order of bytes in a long?"
+ . ./myread
+ byteorder="$ans"
+ ;;
+ *) byteorder=$dflt
+ ;;
+ esac
;;
esac
+ $rm -f try.c try
;;
esac
-$rm -f try.c try
+
: how do we catenate cpp tokens here?
echo " "
echo "You have EBCDIC." >&4
val="$define"
else
- echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
+ echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin, or UTF." >&4
fi
else
echo "I'm unable to compile the test program." >&4
set ebcdic
eval $setvar
+echo " "
+$cat >&4 <<EOM
+Checking how to flush all pending stdio output...
+EOM
+# I only know how to find the first 32 possibly open files on SunOS.
+# See also hints/sunos_4_1.sh and util.c --AD
+case "$osname" in
+sunos) $echo '#define PERL_FFLUSH_ALL_FOPEN_MAX 32' > try.c ;;
+esac
+$cat >>try.c <<EOCP
+#include <stdio.h>
+#$i_unistd I_UNISTD
+#ifdef I_UNISTD
+# include <unistd.h>
+#endif
+#$d_sysconf HAS_SYSCONF
+#$d_stdio_stream_array HAS_STDIO_STREAM_ARRAY
+#ifdef HAS_STDIO_STREAM_ARRAY
+# define STDIO_STREAM_ARRAY $stdio_stream_array
+#endif
+int main() {
+ FILE* p = fopen("try.out", "w");
+#ifdef TRY_FPUTC
+ fputc('x', p);
+#else
+# ifdef TRY_FPRINTF
+ fprintf(p, "x");
+# endif
+#endif
+#ifdef TRY_FFLUSH_NULL
+ fflush(NULL);
+#endif
+#ifdef TRY_FFLUSH_ALL
+ {
+ long open_max = -1;
+# ifdef PERL_FFLUSH_ALL_FOPEN_MAX
+ open_max = PERL_FFLUSH_ALL_FOPEN_MAX;
+# else
+# if defined(HAS_SYSCONF) && defined(_SC_OPEN_MAX)
+ open_max = sysconf(_SC_OPEN_MAX);
+# else
+# ifdef FOPEN_MAX
+ open_max = FOPEN_MAX;
+# else
+# ifdef OPEN_MAX
+ open_max = OPEN_MAX;
+# else
+# ifdef _NFILE
+ open_max = _NFILE;
+# endif
+# endif
+# endif
+# endif
+# endif
+# ifdef HAS_STDIO_STREAM_ARRAY
+ if (open_max > 0) {
+ long i;
+ for (i = 0; i < open_max; i++)
+ if (STDIO_STREAM_ARRAY[i]._file >= 0 &&
+ STDIO_STREAM_ARRAY[i]._file < open_max &&
+ STDIO_STREAM_ARRAY[i]._flag)
+ fflush(&STDIO_STREAM_ARRAY[i]);
+ }
+ }
+# endif
+#endif
+ _exit(42);
+}
+EOCP
+: first we have to find out how _not_ to flush
+if $test "X$fflushNULL" = X -o "X$fflushall" = X; then
+ output=''
+ set try -DTRY_FPUTC
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test ! -s try.out -a "X$?" = X42; then
+ output=-DTRY_FPUTC
+ fi
+ fi
+ case "$output" in
+ '')
+ set try -DTRY_FPRINTF
+ $rm -f try.out
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test ! -s try.out -a "X$?" = X42; then
+ output=-DTRY_FPRINTF
+ fi
+ fi
+ ;;
+ esac
+fi
+: check for fflush NULL behaviour
+case "$fflushNULL" in
+'') set try -DTRY_FFLUSH_NULL $output
+ if eval $compile; then
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ code="$?"
+ if $test -s try.out -a "X$code" = X42; then
+ fflushNULL="`$cat try.out`"
+ else
+ if $test "X$code" != X42; then
+ $cat >&4 <<EOM
+(If this test failed, don't worry, we'll try another method shortly.)
+EOM
+ fi
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushNULL" in
+ x) $cat >&4 <<EOM
+Your fflush(NULL) works okay.
+EOM
+ fflushNULL="$define"
+ ;;
+ '') $cat >&4 <<EOM
+Your fflush(NULL) isn't working (contrary to ANSI C).
+EOM
+ fflushNULL="$undef"
+ ;;
+ *) $cat >&4 <<EOM
+Cannot figure out whether your fflush(NULL) works or not.
+I'm assuming it doesn't (contrary to ANSI C).
+EOM
+ fflushNULL="$undef"
+ ;;
+ esac
+ ;;
+$define|true|[yY]*)
+ fflushNULL="$define"
+ ;;
+*)
+ fflushNULL="$undef"
+ ;;
+esac
+: check explicit looping only if NULL did not work
+case "$fflushNULL" in
+"$undef")
+ : check for fflush all behaviour
+ case "$fflushall" in
+ '') set try -DTRY_FFLUSH_ALL $output
+ if eval $compile; then
+ $cat >&4 <<EOM
+(Now testing the other method--but note that also this may fail.)
+EOM
+ $rm -f try.out
+ ./try$exe_ext 2>/dev/null
+ if $test -s try.out -a "X$?" = X42; then
+ fflushall="`$cat try.out`"
+ fi
+ fi
+ $rm -f core try.core core.try.*
+ case "$fflushall" in
+ x) $cat >&4 <<EOM
+Whew. Flushing explicitly all the stdio streams works.
+EOM
+ fflushall="$define"
+ ;;
+ '') $cat >&4 <<EOM
+Sigh. Flushing explicitly all the stdio streams doesn't work.
+EOM
+ fflushall="$undef"
+ ;;
+ *) $cat >&4 <<EOM
+Cannot figure out whether flushing stdio streams explicitly works or not.
+I'm assuming it doesn't.
+EOM
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+ "$define"|true|[yY]*)
+ fflushall="$define"
+ ;;
+ *)
+ fflushall="$undef"
+ ;;
+ esac
+ ;;
+*) fflushall="$undef"
+ ;;
+esac
+case "$fflushNULL$fflushall" in
+undefundef)
+ $cat <<EOM
+I cannot figure out how to flush pending stdio output.
+EOM
+ ;;
+esac
+$rm -f try.* try$exe_ext
+
: see what type file positions are declared as in the library
rp="What is the type for file position used by fsetpos()?"
set fpos_t fpostype long stdio.h sys/types.h
eval $typedef_ask
+: Store the full pathname to the ar program for use in the C program
+: Respect a hint or command line value for full_ar.
+case "$full_ar" in
+'') full_ar=$ar ;;
+esac
+
: Store the full pathname to the sed program for use in the C program
full_sed=$sed
#ifdef I_SYS_SELECT
#include <sys/select.h>
#endif
+#$d_socket HAS_SOCKET
+#ifdef HAS_SOCKET
+# include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
+#endif
#include <stdio.h>
$selecttype b;
#define S sizeof(*(b))
: Trace out the files included by signal.h, then look for SIGxxx names.
: Remove SIGARRAYSIZE used by HPUX.
+: Remove SIGSTKSIZE used by Linux.
+: Remove SIGSTKSZ used by Posix.
: Remove SIGTYP void lines used by OS2.
xxx=`echo '#include <signal.h>' |
$cppstdin $cppminus $cppflags 2>/dev/null |
'') xxxfiles=`./findhdr signal.h` ;;
esac
xxx=`awk '
-$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $2 !~ /SIGARRAYSIZE/ && $3 !~ /void/ {
+$1 ~ /^#define$/ && $2 ~ /^SIG[A-Z0-9]*$/ && $2 !~ /SIGARRAYSIZE/ && $2 !~ /SIGSTKSIZE/ && $2 !~ /SIGSTKSZ/ && $3 !~ /void/ {
print substr($2, 4, 20)
}
$1 == "#" && $2 ~ /^define$/ && $3 ~ /^SIG[A-Z0-9]*$/ && $3 !~ /SIGARRAYSIZE/ && $4 !~ /void/ {
sig_name[$2] = $1
sig_num[$2] = $2
}
-
}
END {
- if (nsig == 0) { nsig = maxsig + 1 }
- for (n = 1; n < nsig; n++) {
- if (sig_name[n]) {
- printf("%s %d\n", sig_name[n], sig_num[n])
- }
- else {
- printf("NUM%d %d\n", n, n)
- }
+ if (nsig == 0) {
+ nsig = maxsig + 1
+ }
+ printf("NSIG %d\n", nsig);
+ for (n = 1; n < nsig; n++) {
+ if (sig_name[n]) {
+ printf("%s %d\n", sig_name[n], sig_num[n])
}
+ else {
+ printf("NUM%d %d\n", n, n)
+ }
+ }
for (n = 0; n < ndups; n++) {
- printf("%s %d\n", dup_name[n], dup_num[n])
+ printf("%s %d\n", dup_name[n], dup_num[n])
}
}
EOP
0) set HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM;;
esac
echo $@ | $tr ' ' $trnl | \
- $awk '{ printf $1; printf " %d\n", ++s; }' >signal.lst
+ $awk '{ printf "%s %d\n", $1, ++s; }
+ END { printf "NSIG %d\n", ++s }' >signal.lst
fi
$rm -f signal.c signal$_exe signal$_o signal.nsg signal.ls1
EOS
yes)
echo "Generating a list of signal names and numbers..." >&4
. ./signal_cmd
- sig_name=`$awk '{printf "%s ", $1}' signal.lst`
- sig_name="ZERO $sig_name"
- sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
- { printf "\"%s\", ", $1 }
- END { printf "0\n" }' signal.lst`
- sig_num=`$awk '{printf "%d ", $2}' signal.lst`
- sig_num="0 $sig_num"
- sig_num_init=`$awk 'BEGIN { printf "0, " }
- { printf "%d, ", $2}
- END { printf "0\n"}' signal.lst`
- ;;
-esac
-echo "The following signals are available:"
+ sig_count=`$awk '/^NSIG/ { printf "%d", $2 }' signal.lst`
+ sig_name=`$awk 'BEGIN { printf "ZERO " }
+ !/^NSIG/ { printf "%s ", $1 }' signal.lst`
+ sig_num=`$awk 'BEGIN { printf "0 " }
+ !/^NSIG/ { printf "%d ", $2 }' signal.lst`
+ sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
+ !/^NSIG/ { printf "\"%s\", ", $1 }
+ END { printf "0\n" }' signal.lst`
+ sig_num_init=`$awk 'BEGIN { printf "0, " }
+ !/^NSIG/ { printf "%d, ", $2}
+ END { printf "0\n"}' signal.lst`
+ ;;
+esac
+echo "The following $sig_count signals are available:"
echo " "
echo $sig_name | $awk \
'BEGIN { linelen = 0 }
set i_neterrno
eval $setvar
+: see if netinet/tcp.h is available
+set netinet/tcp.h i_netinettcp
+eval $inhdr
+
: see if this is a poll.h system
set poll.h i_poll
eval $inhdr
./Cppsym -l $al | $sort | $grep -v '^$' >Cppsym.true
: now check the C compiler for additional symbols
+postprocess_cc_v=''
+case "$osname" in
+aix) postprocess_cc_v="|$tr , ' '" ;;
+esac
$cat >ccsym <<EOS
$startsh
$cat >tmp.c <<EOF
extern int foo;
EOF
-for i in \`$cc -v -c tmp.c 2>&1\`
+for i in \`$cc -v -c tmp.c 2>&1 $postprocess_cc_v\`
do
case "\$i" in
-D*) echo "\$i" | $sed 's/^-D//';;
done
$rm -f try.c
EOS
+postprocess_cc_v=''
chmod +x ccsym
$eunicefix ccsym
./ccsym > ccsym1.raw
val=$val2; set i_sgtty; eval $setvar
val=$val3; set i_termios; eval $setvar
+: see if this is a shadow.h system
+set shadow.h i_shadow
+eval $inhdr
+
+: see if this is a socks.h system
+set socks.h i_socks
+eval $inhdr
+
: see if stdarg is available
echo " "
if $test `./findhdr stdarg.h`; then
echo " "
echo "Looking for extensions..." >&4
-tdir=`pwd`
-cd $rsrc/ext
: If we are using the old config.sh, known_extensions may contain
: old or inaccurate or duplicate values.
known_extensions=''
: We do not just use MANIFEST because the user may have dropped
: some additional extensions into the source tree and expect them
: to be built.
-for xxx in * ; do
- case "$xxx" in
- DynaLoader|dynaload) ;;
- *) if $test -f $xxx/$xxx.xs; then
- known_extensions="$known_extensions $xxx"
- elif $test -f $xxx/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $xxx"
- else
- if $test -d $xxx; then
- # Look for nested extensions, eg. Devel/Dprof.
- cd $xxx
- for yyy in * ; do
- if $test -f $yyy/$yyy.xs; then
- known_extensions="$known_extensions $xxx/$yyy"
- elif $test -f $yyy/Makefile.PL; then
- nonxs_extensions="$nonxs_extensions $xxx/$yyy"
- fi
- done
- cd ..
- fi
- fi
- ;;
- esac
-done
+
+: Function to recursively find available extensions, ignoring DynaLoader
+: NOTE: recursion limit of 10 to prevent runaway in case of symlink madness
+find_extensions='
+ for xxx in *; do
+ case "$xxx" in
+ DynaLoader|dynaload) ;;
+ *)
+ if $test -f $xxx/$xxx.xs; then
+ known_extensions="$known_extensions $1$xxx";
+ elif $test -f $xxx/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $1$xxx";
+ else
+ if $test -d $xxx -a $# -lt 10; then
+ set $1$xxx/ $*;
+ cd $xxx;
+ eval $find_extensions;
+ cd ..;
+ shift;
+ fi;
+ fi
+ ;;
+ esac;
+ done'
+tdir=`pwd`
+cd $rsrc/ext
+set X
+shift
+eval $find_extensions
set X $nonxs_extensions
shift
nonxs_extensions="$*"
cpprun='$cpprun'
cppstdin='$cppstdin'
cppsymbols='$cppsymbols'
+crosscompile='$crosscompile'
cryptlib='$cryptlib'
csh='$csh'
d_Gconvert='$d_Gconvert'
d_endpent='$d_endpent'
d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
+d_endspent='$d_endspent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fchmod='$d_fchmod'
d_gethname='$d_gethname'
d_gethostprotos='$d_gethostprotos'
d_getlogin='$d_getlogin'
+d_getmntent='$d_getmntent'
d_getnbyaddr='$d_getnbyaddr'
d_getnbyname='$d_getnbyname'
d_getnent='$d_getnent'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
+d_getspent='$d_getspent'
+d_getspnam='$d_getspnam'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
d_grpasswd='$d_grpasswd'
+d_hasmntopt='$d_hasmntopt'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
-d_ino64t='$d_ino64t'
+d_ino64_t='$d_ino64_t'
d_int64t='$d_int64t'
d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_link='$d_link'
+d_llseek='$d_llseek'
d_locconv='$d_locconv'
d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_mbtowc='$d_mbtowc'
+d_memchr='$d_memchr'
d_memcmp='$d_memcmp'
d_memcpy='$d_memcpy'
d_memmove='$d_memmove'
d_mymalloc='$d_mymalloc'
d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
-d_off64t='$d_off64t'
+d_off64_t='$d_off64_t'
+d_offset_t='$d_offset_t'
d_old_pthread_create_joinable='$d_old_pthread_create_joinable'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_setruid='$d_setruid'
d_setsent='$d_setsent'
d_setsid='$d_setsid'
+d_setspent='$d_setspent'
d_setvbuf='$d_setvbuf'
d_sfio='$d_sfio'
d_shm='$d_shm'
d_statvfs='$d_statvfs'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
+d_stdio_stream_array='$d_stdio_stream_array'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
d_store64='$d_store64'
d_umask='$d_umask'
d_uname='$d_uname'
d_union_semun='$d_union_semun'
+d_vendorlib='$d_vendorlib'
d_vfork='$d_vfork'
d_void_closedir='$d_void_closedir'
d_voidsig='$d_voidsig'
exe_ext='$exe_ext'
expr='$expr'
extensions='$extensions'
+fflushNULL='$fflushNULL'
+fflushall='$fflushall'
find='$find'
firstmakefile='$firstmakefile'
flex='$flex'
fpostype='$fpostype'
freetype='$freetype'
+full_ar='$full_ar'
full_csh='$full_csh'
full_sed='$full_sed'
gccversion='$gccversion'
i_ndbm='$i_ndbm'
i_netdb='$i_netdb'
i_neterrno='$i_neterrno'
+i_netinettcp='$i_netinettcp'
i_niin='$i_niin'
i_poll='$i_poll'
+i_pthread='$i_pthread'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_sfio='$i_sfio'
i_sgtty='$i_sgtty'
+i_shadow='$i_shadow'
+i_socks='$i_socks'
i_stdarg='$i_stdarg'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
installbin='$installbin'
installman1dir='$installman1dir'
installman3dir='$installman3dir'
+installprefix='$installprefix'
+installprefixexp='$installprefixexp'
installprivlib='$installprivlib'
installscript='$installscript'
installsitearch='$installsitearch'
installsitelib='$installsitelib'
+installstyle='$installstyle'
installusrbinperl='$installusrbinperl'
+installvendorlib='$installvendorlib'
intsize='$intsize'
known_extensions='$known_extensions'
ksh='$ksh'
ld='$ld'
lddlflags='$lddlflags'
ldflags='$ldflags'
+ldlibpthname='$ldlibpthname'
less='$less'
lib_ext='$lib_ext'
libc='$libc'
models='$models'
modetype='$modetype'
more='$more'
+multiarch='$multiarch'
mv='$mv'
myarchname='$myarchname'
mydomain='$mydomain'
shortsize='$shortsize'
shrpenv='$shrpenv'
shsharp='$shsharp'
+sig_count='$sig_count'
sig_name='$sig_name'
sig_name_init='$sig_name_init'
sig_num='$sig_num'
sitearchexp='$sitearchexp'
sitelib='$sitelib'
sitelibexp='$sitelibexp'
+siteprefix='$siteprefix'
+siteprefixexp='$siteprefixexp'
sizetype='$sizetype'
sleep='$sleep'
smail='$smail'
stdio_cnt='$stdio_cnt'
stdio_filbuf='$stdio_filbuf'
stdio_ptr='$stdio_ptr'
+stdio_stream_array='$stdio_stream_array'
strings='$strings'
submit='$submit'
subversion='$subversion'
useposix='$useposix'
usesfio='$usesfio'
useshrplib='$useshrplib'
+usesocks='$usesocks'
usethreads='$usethreads'
+usevendorprefix='$usevendorprefix'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+vendorlib='$vendorlib'
+vendorlibexp='$vendorlibexp'
+vendorprefix='$vendorprefix'
+vendorprefixexp='$vendorprefixexp'
version='$version'
vi='$vi'
voidflags='$voidflags'
: add special variables
$test -f $src/patchlevel.h && \
-awk '/^#define/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
-echo "CONFIG=true" >>config.sh
+awk '/^#define[ ]+PERL_/ {printf "%s=%s\n",$2,$3}' $src/patchlevel.h >>config.sh
+echo "CONFIGDOTSH=true" >>config.sh
: propagate old symbols
if $test -f UU/config.sh; then
https://perl5.git.perl.org / perl5.git / blobdiff