-#\r
-# Makefile to build perl on Windows NT using DMAKE.\r
-# Supported compilers:\r
-# Visual C++ 2.0 thro 6.0\r
-# Borland C++ 5.02\r
-# Mingw32 with gcc-2.95.2 or better **experimental**\r
-#\r
-# This is set up to build a perl.exe that runs off a shared library\r
-# (perl57.dll). Also makes individual DLLs for the XS extensions.\r
-#\r
-\r
-##\r
-## Make sure you read README.win32 *before* you mess with anything here!\r
-##\r
-\r
-##\r
-## Build configuration. Edit the values below to suit your needs.\r
-##\r
-\r
-#\r
-# Set these to wherever you want "dmake install" to put your\r
-# newly built perl.\r
-#\r
-INST_DRV *= c:\r
-INST_TOP *= $(INST_DRV)\perl\r
-\r
-#\r
-# Comment this out if you DON'T want your perl installation to be versioned.\r
-# This means that the new installation will overwrite any files from the\r
-# old installation at the same INST_TOP location. Leaving it enabled is\r
-# the safest route, as perl adds the extra version directory to all the\r
-# locations it installs files to. If you disable it, an alternative\r
-# versioned installation can be obtained by setting INST_TOP above to a\r
-# path that includes an arbitrary version string.\r
-#\r
-INST_VER *= \5.7.1\r
-\r
-#\r
-# Comment this out if you DON'T want your perl installation to have\r
-# architecture specific components. This means that architecture-\r
-# specific files will be installed along with the architecture-neutral\r
-# files. Leaving it enabled is safer and more flexible, in case you\r
-# want to build multiple flavors of perl and install them together in\r
-# the same location. Commenting it out gives you a simpler\r
-# installation that is easier to understand for beginners.\r
-#\r
-INST_ARCH *= \$(ARCHNAME)\r
-\r
-#\r
-# uncomment to enable multiple interpreters. This is need for fork()\r
-# emulation.\r
-#\r
-USE_MULTI *= define\r
-\r
-#\r
-# Beginnings of interpreter cloning/threads; still very incomplete.\r
-# This should be enabled to get the fork() emulation. This needs\r
-# USE_MULTI as well.\r
-#\r
-USE_ITHREADS *= define\r
-\r
-#\r
-# uncomment to enable the implicit "host" layer for all system calls\r
-# made by perl. This needs USE_MULTI above. This is also needed to\r
-# get fork().\r
-#\r
-USE_IMP_SYS *= define\r
-\r
-#\r
-# uncomment to enable the experimental PerlIO I/O subsystem.\r
-USE_PERLIO = define\r
-\r
-#\r
-# WARNING! This option is deprecated and will eventually go away (enable\r
-# USE_ITHREADS instead).\r
-#\r
-# uncomment to enable threads-capabilities. This is incompatible with\r
-# USE_ITHREADS, and is only here for people who may have come to rely\r
-# on the experimental Thread support that was in 5.005.\r
-#\r
-#USE_5005THREADS *= define\r
-\r
-#\r
-# WARNING! This option is deprecated and will eventually go away (enable\r
-# USE_MULTI instead).\r
-#\r
-# uncomment next line if you want to use the PERL_OBJECT build option.\r
-# DO NOT ENABLE unless you have legacy code that relies on the C++\r
-# CPerlObj class that was available in 5.005. This cannot be enabled\r
-# if you ask for USE_5005THREADS above.\r
-#\r
-#USE_OBJECT *= define\r
-\r
-#\r
-# uncomment exactly one of the following\r
-#\r
-# Visual C++ 2.x\r
-#CCTYPE *= MSVC20\r
-# Visual C++ > 2.x and < 6.x\r
-#CCTYPE *= MSVC\r
-# Visual C++ >= 6.x\r
-CCTYPE *= MSVC60\r
-# Borland 5.02 or later\r
-#CCTYPE *= BORLAND\r
-# mingw32+gcc-2.95.2 or better\r
-#CCTYPE *= GCC\r
-\r
-#\r
-# uncomment this if your Borland compiler is older than v5.4.\r
-BCCOLD = define\r
-#\r
-# uncomment this if you want to use Borland's VCL as your CRT\r
-#BCCVCL = define\r
-\r
-#\r
-# uncomment this if you are compiling under Windows 95/98 and command.com\r
-# (not needed if you're running under 4DOS/NT 6.01 or later)\r
-#IS_WIN95 *= define\r
-\r
-#\r
-# uncomment next line if you want debug version of perl (big,slow)\r
-# If not enabled, we automatically try to use maximum optimization\r
-# with all compilers that are known to have a working optimizer.\r
-#\r
-CFG *= Debug\r
-\r
-#\r
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.\r
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.\r
-# This currently requires VC 5.0 with Service Pack 3 or later.\r
-# Get it from CPAN at http://www.perl.com/CPAN/authors/id/D/DO/DOUGL/\r
-# and follow the directions in the package to install.\r
-#\r
-# Not recommended if you have VC 6.x and you're not running Windows 9x.\r
-#\r
-#USE_PERLCRT *= define\r
-\r
-#\r
-# uncomment to enable linking with setargv.obj under the Visual C\r
-# compiler. Setting this options enables perl to expand wildcards in\r
-# arguments, but it may be harder to use alternate methods like\r
-# File::DosGlob that are more powerful. This option is supported only with\r
-# Visual C.\r
-#\r
-#USE_SETARGV *= define\r
-\r
-#\r
-# if you have the source for des_fcrypt(), uncomment this and make sure the\r
-# file exists (see README.win32). File should be located in the same\r
-# directory as this file.\r
-#\r
-#CRYPT_SRC *= fcrypt.c\r
-\r
-#\r
-# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a\r
-# library, uncomment this, and make sure the library exists (see README.win32)\r
-# Specify the full pathname of the library.\r
-#\r
-#CRYPT_LIB *= fcrypt.lib\r
-\r
-#\r
-# set this if you wish to use perl's malloc\r
-# WARNING: Turning this on/off WILL break binary compatibility with extensions\r
-# you may have compiled with/without it. Be prepared to recompile all\r
-# extensions if you change the default. Currently, this cannot be enabled\r
-# if you ask for USE_IMP_SYS above.\r
-#\r
-#PERL_MALLOC *= define\r
-\r
-#\r
-# set the install locations of the compiler include/libraries\r
-# Running VCVARS32.BAT is *required* when using Visual C.\r
-# Some versions of Visual C don't define MSVCDIR in the environment,\r
-# so you may have to set CCHOME explicitly (spaces in the path name should\r
-# not be quoted)\r
-#\r
-#CCHOME *= F:\borland\bc5\r
-CCHOME *= $(MSVCDIR)\r
-#CCHOME *= c:\gcc-2.95.2\r
-CCINCDIR *= $(CCHOME)\include\r
-CCLIBDIR *= $(CCHOME)\lib\r
-\r
-#\r
-# Additional compiler flags can be specified here.\r
-#\r
-\r
-#\r
-# This should normally be disabled. Adding -DPERL_POLLUTE enables support\r
-# for old symbols by default, at the expense of extreme pollution. You most\r
-# probably just want to build modules that won't compile with\r
-# perl Makefile.PL POLLUTE=1\r
-# instead of enabling this. Please report such modules to the respective\r
-# authors.\r
-#\r
-#BUILDOPT += -DPERL_POLLUTE\r
-\r
-#\r
-# This should normally be disabled. Enabling it will disable the File::Glob\r
-# implementation of CORE::glob.\r
-#\r
-#BUILDOPT += -DPERL_EXTERNAL_GLOB\r
-\r
-#\r
-# This should normally be disabled. Enabling it causes perl to read scripts\r
-# in text mode (which is the 5.005 behavior) and will break ByteLoader.\r
-#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS\r
-\r
-#\r
-# specify semicolon-separated list of extra directories that modules will\r
-# look for libraries (spaces in path names need not be quoted)\r
-#\r
-EXTRALIBDIRS *=\r
-\r
-#\r
-# set this to point to cmd.exe (only needed if you use some\r
-# alternate shell that doesn't grok cmd.exe style commands)\r
-#\r
-#SHELL *= g:\winnt\system32\cmd.exe\r
-\r
-#\r
-# set this to your email address (perl will guess a value from\r
-# from your loginname and your hostname, which may not be right)\r
-#\r
-#EMAIL *=\r
-\r
-##\r
-## Build configuration ends.\r
-##\r
-\r
-##################### CHANGE THESE ONLY IF YOU MUST #####################\r
-\r
-.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""\r
-D_CRYPT = undef\r
-.ELSE\r
-D_CRYPT = define\r
-CRYPT_FLAG = -DHAVE_DES_FCRYPT\r
-.ENDIF\r
-\r
-.IF "$(USE_OBJECT)" == "define"\r
-PERL_MALLOC != undef\r
-USE_5005THREADS != undef\r
-USE_MULTI != undef\r
-USE_IMP_SYS != define\r
-.ENDIF\r
-\r
-PERL_MALLOC *= undef\r
-\r
-USE_5005THREADS *= undef\r
-\r
-.IF "$(USE_5005THREADS)" == "define"\r
-USE_ITHREADS != undef\r
-.ENDIF\r
-\r
-.IF "$(USE_IMP_SYS)" == "define"\r
-PERL_MALLOC != undef\r
-.ENDIF\r
-\r
-USE_MULTI *= undef\r
-USE_OBJECT *= undef\r
-USE_ITHREADS *= undef\r
-USE_IMP_SYS *= undef\r
-USE_PERLIO *= undef\r
-USE_PERLCRT *= undef\r
-\r
-.IF "$(USE_IMP_SYS)$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" == "defineundefundefundef"\r
-USE_MULTI != define\r
-.ENDIF\r
-\r
-.IF "$(USE_ITHREADS)$(USE_MULTI)$(USE_OBJECT)" == "defineundefundef"\r
-USE_MULTI != define\r
-USE_5005THREADS != undef\r
-.ENDIF\r
-\r
-.IF "$(USE_MULTI)$(USE_5005THREADS)$(USE_OBJECT)" != "undefundefundef"\r
-BUILDOPT += -DPERL_IMPLICIT_CONTEXT\r
-.ENDIF\r
-\r
-.IF "$(USE_IMP_SYS)" != "undef"\r
-BUILDOPT += -DPERL_IMPLICIT_SYS\r
-.ENDIF\r
-\r
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE\r
-\r
-PROCESSOR_ARCHITECTURE *= x86\r
-\r
-.IF "$(USE_OBJECT)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-object\r
-.ELIF "$(USE_5005THREADS)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-thread\r
-.ELIF "$(USE_MULTI)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi\r
-.ELSE\r
-.IF "$(USE_PERLIO)" == "define"\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio\r
-.ELSE\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
-.ENDIF\r
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)\r
-.ENDIF\r
-\r
-.IF "$(USE_ITHREADS)" == "define"\r
-ARCHNAME !:= $(ARCHNAME)-thread\r
-.ENDIF\r
-\r
-# Visual Studio 98 specific\r
-.IF "$(CCTYPE)" == "MSVC60"\r
-\r
-# VC 6.0 can load the socket dll on demand. Makes the test suite\r
-# run in about 10% less time.\r
-DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib\r
-\r
-.IF "$(CFG)" == "Debug"\r
-.ELSE\r
-# VC 6.0 seems capable of compiling perl correctly with optimizations\r
-# enabled. Anything earlier fails tests.\r
-CFG *= Optimize\r
-.ENDIF\r
-.ENDIF\r
-\r
-ARCHDIR = ..\lib\$(ARCHNAME)\r
-COREDIR = ..\lib\CORE\r
-AUTODIR = ..\lib\auto\r
-LIBDIR = ..\lib\r
-EXTDIR = ..\ext\r
-PODDIR = ..\pod\r
-EXTUTILSDIR = $(LIBDIR)\ExtUtils\r
-\r
-#\r
-INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin\r
-INST_BIN = $(INST_SCRIPT)$(INST_ARCH)\r
-INST_LIB = $(INST_TOP)$(INST_VER)\lib\r
-INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)\r
-INST_COREDIR = $(INST_ARCHLIB)\CORE\r
-INST_POD = $(INST_LIB)\pod\r
-INST_HTML = $(INST_TOP)$(INST_VER)\html\r
-\r
-#\r
-# Programs to compile, build .lib files and link\r
-#\r
-\r
-.USESHELL :\r
-\r
-.IF "$(CCTYPE)" == "BORLAND"\r
-\r
-CC = bcc32\r
-.IF "$(BCCOLD)" != "define"\r
-LINK32 = ilink32\r
-.ELSE\r
-LINK32 = tlink32\r
-.ENDIF\r
-LIB32 = tlib /P128\r
-IMPLIB = implib -c\r
-RSC = rc\r
-\r
-#\r
-# Options\r
-#\r
-INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"\r
-#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch \r
-DEFINES = -DWIN32 $(CRYPT_FLAG)\r
-LOCDEFS = -DPERLDLL -DPERL_CORE\r
-SUBSYS = console\r
-CXX_FLAG = -P\r
-\r
-LIBC = cw32mti.lib\r
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)\r
-\r
-.IF "$(CFG)" == "Debug"\r
-OPTIMIZE = -v -D_RTLDLL -DDEBUGGING\r
-LINK_DBG = -v\r
-.ELSE\r
-OPTIMIZE = -O2 -D_RTLDLL\r
-LINK_DBG =\r
-.ENDIF\r
-\r
-CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
- $(PCHFLAGS) $(OPTIMIZE)\r
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
-OBJOUT_FLAG = -o\r
-EXEOUT_FLAG = -e\r
-LIBOUT_FLAG =\r
-.IF "$(BCCOLD)" != "define"\r
-LINK_FLAGS += -Gn\r
-DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410\r
-.END\r
-.IF "$(BCCVCL)" == "define"\r
-LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib\r
-LINK_FLAGS += -L"$(CCLIBDIR)\Release"\r
-.END\r
-\r
-\r
-.ELIF "$(CCTYPE)" == "GCC"\r
-\r
-CC = gcc\r
-LINK32 = gcc\r
-LIB32 = ar rc\r
-IMPLIB = dlltool\r
-RSC = rc\r
-\r
-i = .i\r
-o = .o\r
-a = .a\r
-\r
-#\r
-# Options\r
-#\r
-\r
-INCLUDES = -I.\include -I. -I.. -I$(COREDIR)\r
-DEFINES = -DWIN32 $(CRYPT_FLAG)\r
-LOCDEFS = -DPERLDLL -DPERL_CORE\r
-SUBSYS = console\r
-CXX_FLAG = -xc++\r
-\r
-LIBC = -lmsvcrt\r
-\r
-# same libs as MSVC\r
-LIBFILES = $(CRYPT_LIB) $(LIBC) \\r
- -lmoldname -lkernel32 -luser32 -lgdi32 \\r
- -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \\r
- -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \\r
- -lwinmm -lversion -lodbc32\r
-\r
-.IF "$(CFG)" == "Debug"\r
-OPTIMIZE = -g -O2 -DDEBUGGING\r
-LINK_DBG = -g\r
-.ELSE\r
-OPTIMIZE = -g -O2\r
-LINK_DBG = -g\r
-.ENDIF\r
-\r
-CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)\r
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"\r
-OBJOUT_FLAG = -o\r
-EXEOUT_FLAG = -o\r
-LIBOUT_FLAG =\r
-\r
-# NOTE: we assume that GCC uses MSVCRT.DLL\r
-BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX\r
-\r
-.ELSE\r
-\r
-CC = cl\r
-LINK32 = link\r
-LIB32 = $(LINK32) -lib\r
-RSC = rc\r
-\r
-#\r
-# Options\r
-#\r
-\r
-INCLUDES = -I$(COREDIR) -I.\include -I. -I..\r
-#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX\r
-DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)\r
-LOCDEFS = -DPERLDLL -DPERL_CORE\r
-SUBSYS = console\r
-CXX_FLAG = -TP -GX\r
-\r
-.IF "$(USE_PERLCRT)" != "define"\r
-LIBC = msvcrt.lib\r
-.ELSE\r
-LIBC = PerlCRT.lib\r
-.ENDIF\r
-\r
-PERLEXE_RES =\r
-PERLDLL_RES =\r
-\r
-.IF "$(CFG)" == "Debug"\r
-.IF "$(CCTYPE)" == "MSVC20"\r
-OPTIMIZE = -Od -MD -Z7 -DDEBUGGING\r
-LINK_DBG = -debug -pdb:none\r
-.ELSE\r
-# -Zi requires .pdb file(s)\r
-#OPTIMIZE = -Od -MD -Zi -DDEBUGGING\r
-#LINK_DBG = -debug\r
-OPTIMIZE = -O1 -MD -Z7 -DDEBUGGING\r
-LINK_DBG = -debug -debugtype:both -pdb:none\r
-.ENDIF\r
-.ELSE\r
-.IF "$(CFG)" == "Optimize"\r
-# -O1 yields smaller code, which turns out to be faster than -O2\r
-#OPTIMIZE = -O2 -MD -DNDEBUG\r
-OPTIMIZE = -O1 -MD -DNDEBUG\r
-.ELSE\r
-OPTIMIZE = -Od -MD -DNDEBUG\r
-.ENDIF\r
-LINK_DBG = -release\r
-.ENDIF\r
-\r
-LIBBASEFILES = $(CRYPT_LIB) \\r
- oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \\r
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \\r
- netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \\r
- version.lib odbc32.lib odbccp32.lib\r
-\r
-# we add LIBC here, since we may be using PerlCRT.dll\r
-LIBFILES = $(LIBBASEFILES) $(LIBC)\r
-\r
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \\r
- $(PCHFLAGS) $(OPTIMIZE)\r
-LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \\r
- -libpath:"$(INST_COREDIR)" \\r
- -machine:$(PROCESSOR_ARCHITECTURE)\r
-OBJOUT_FLAG = -Fo\r
-EXEOUT_FLAG = -Fe\r
-LIBOUT_FLAG = /out:\r
-\r
-.IF "$(USE_PERLCRT)" != "define"\r
-BUILDOPT += -DPERL_MSVCRT_READFIX\r
-.ENDIF\r
-\r
-.ENDIF\r
-\r
-.IF "$(USE_OBJECT)" == "define"\r
-OPTIMIZE += $(CXX_FLAG)\r
-BUILDOPT += -DPERL_OBJECT\r
-.ENDIF\r
-\r
-CFLAGS_O = $(CFLAGS) $(BUILDOPT)\r
-\r
-# used to allow local linking flags that are not propogated into Config.pm,\r
-# currently unused\r
-# -- BKS, 12-12-1999\r
-PRIV_LINK_FLAGS *=\r
-BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)\r
-\r
-#################### do not edit below this line #######################\r
-############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############\r
-\r
-o *= .obj\r
-a *= .lib\r
-\r
-LKPRE = INPUT (\r
-LKPOST = )\r
-\r
-#\r
-# Rules\r
-#\r
-\r
-.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res\r
-\r
-.c$(o):\r
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<\r
-\r
-.c.i:\r
- $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@\r
-\r
-.y.c:\r
- $(NOOP)\r
-\r
-$(o).dll:\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def\r
- $(IMPLIB) $(*B).lib $@\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)\r
- $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@\r
-.ELSE\r
- $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \\r
- -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)\r
-.ENDIF\r
-\r
-.rc.res:\r
- $(RSC) -i.. $<\r
-\r
-#\r
-# various targets\r
-MINIPERL = ..\miniperl.exe\r
-MINIDIR = .\mini\r
-PERLEXE = ..\perl.exe\r
-WPERLEXE = ..\wperl.exe\r
-GLOBEXE = ..\perlglob.exe\r
-CONFIGPM = ..\lib\Config.pm\r
-MINIMOD = ..\lib\ExtUtils\Miniperl.pm\r
-X2P = ..\x2p\a2p.exe\r
-\r
-# Nominate a target which causes extensions to be re-built\r
-# This used to be $(PERLEXE), but at worst it is the .dll that they depend\r
-# on and really only the interface - i.e. the .def file used to export symbols\r
-# from the .dll\r
-PERLDEP = perldll.def\r
-\r
-\r
-PL2BAT = bin\pl2bat.pl\r
-GLOBBAT = bin\perlglob.bat\r
-\r
-UTILS = \\r
- ..\utils\h2ph \\r
- ..\utils\splain \\r
- ..\utils\dprofpp \\r
- ..\utils\perlbug \\r
- ..\utils\pl2pm \\r
- ..\utils\c2ph \\r
- ..\utils\h2xs \\r
- ..\utils\perldoc \\r
- ..\utils\perlcc \\r
- ..\pod\checkpods \\r
- ..\pod\pod2html \\r
- ..\pod\pod2latex \\r
- ..\pod\pod2man \\r
- ..\pod\pod2text \\r
- ..\pod\pod2usage \\r
- ..\pod\podchecker \\r
- ..\pod\podselect \\r
- ..\x2p\find2perl \\r
- ..\x2p\s2p \\r
- bin\exetype.pl \\r
- bin\runperl.pl \\r
- bin\pl2bat.pl \\r
- bin\perlglob.pl \\r
- bin\search.pl\r
-\r
-.IF "$(CCTYPE)" == "BORLAND"\r
-\r
-CFGSH_TMPL = config.bc\r
-CFGH_TMPL = config_H.bc\r
-\r
-.ELIF "$(CCTYPE)" == "GCC"\r
-\r
-CFGSH_TMPL = config.gc\r
-CFGH_TMPL = config_H.gc\r
-PERLIMPLIB = ..\libperl57$(a)\r
-\r
-.ELSE\r
-\r
-CFGSH_TMPL = config.vc\r
-CFGH_TMPL = config_H.vc\r
-\r
-.ENDIF\r
-\r
-# makedef.pl must be updated if this changes, and this should normally\r
-# only change when there is an incompatible revision of the public API.\r
-# XXX so why did we change it from perl56 to perl57?\r
-PERLIMPLIB *= ..\perl57$(a)\r
-PERLDLL = ..\perl57.dll\r
-\r
-XCOPY = xcopy /f /r /i /d\r
-RCOPY = xcopy /f /r /i /e /d\r
-NOOP = @echo\r
-\r
-#\r
-# filenames given to xsubpp must have forward slashes (since it puts\r
-# full pathnames in #line strings)\r
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \\r
- -C++ -prototypes\r
-\r
-MICROCORE_SRC = \\r
- ..\av.c \\r
- ..\deb.c \\r
- ..\doio.c \\r
- ..\doop.c \\r
- ..\dump.c \\r
- ..\globals.c \\r
- ..\gv.c \\r
- ..\hv.c \\r
- ..\locale.c \\r
- ..\mg.c \\r
- ..\numeric.c \\r
- ..\op.c \\r
- ..\perl.c \\r
- ..\perlapi.c \\r
- ..\perly.c \\r
- ..\pp.c \\r
- ..\pp_ctl.c \\r
- ..\pp_hot.c \\r
- ..\pp_pack.c \\r
- ..\pp_sys.c \\r
- ..\regcomp.c \\r
- ..\regexec.c \\r
- ..\run.c \\r
- ..\scope.c \\r
- ..\sv.c \\r
- ..\taint.c \\r
- ..\toke.c \\r
- ..\universal.c \\r
- ..\utf8.c \\r
- ..\util.c \\r
- ..\xsutils.c\r
-\r
-EXTRACORE_SRC += perllib.c\r
-\r
-.IF "$(PERL_MALLOC)" == "define"\r
-EXTRACORE_SRC += ..\malloc.c\r
-.ENDIF\r
-\r
-.IF "$(USE_OBJECT)" != "define"\r
-EXTRACORE_SRC += ..\perlio.c\r
-.ENDIF\r
-\r
-WIN32_SRC = \\r
- .\win32.c \\r
- .\win32io.c \\r
- .\win32sck.c \\r
- .\win32thread.c\r
-\r
-.IF "$(CRYPT_SRC)" != ""\r
-WIN32_SRC += .\$(CRYPT_SRC)\r
-.ENDIF\r
-\r
-DLL_SRC = $(DYNALOADER).c\r
-\r
-X2P_SRC = \\r
- ..\x2p\a2p.c \\r
- ..\x2p\hash.c \\r
- ..\x2p\str.c \\r
- ..\x2p\util.c \\r
- ..\x2p\walk.c\r
-\r
-CORE_NOCFG_H = \\r
- ..\av.h \\r
- ..\cop.h \\r
- ..\cv.h \\r
- ..\dosish.h \\r
- ..\embed.h \\r
- ..\form.h \\r
- ..\gv.h \\r
- ..\handy.h \\r
- ..\hv.h \\r
- ..\iperlsys.h \\r
- ..\mg.h \\r
- ..\nostdio.h \\r
- ..\op.h \\r
- ..\opcode.h \\r
- ..\perl.h \\r
- ..\perlapi.h \\r
- ..\perlsdio.h \\r
- ..\perlsfio.h \\r
- ..\perly.h \\r
- ..\pp.h \\r
- ..\proto.h \\r
- ..\regexp.h \\r
- ..\scope.h \\r
- ..\sv.h \\r
- ..\thread.h \\r
- ..\unixish.h \\r
- ..\utf8.h \\r
- ..\util.h \\r
- ..\warnings.h \\r
- ..\XSUB.h \\r
- ..\EXTERN.h \\r
- ..\perlvars.h \\r
- ..\intrpvar.h \\r
- ..\thrdvar.h \\r
- .\include\dirent.h \\r
- .\include\netdb.h \\r
- .\include\sys\socket.h \\r
- .\win32.h\r
-\r
-CORE_H = $(CORE_NOCFG_H) .\config.h\r
-\r
-MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))\r
-CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))\r
-WIN32_OBJ = $(WIN32_SRC:db:+$(o))\r
-MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}\r
-MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}\r
-MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)\r
-DLL_OBJ = $(DLL_SRC:db:+$(o))\r
-X2P_OBJ = $(X2P_SRC:db:+$(o))\r
-\r
-PERLDLL_OBJ = $(CORE_OBJ)\r
-PERLEXE_OBJ = perlmain$(o)\r
-\r
-PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)\r
-\r
-.IF "$(USE_SETARGV)" != ""\r
-SETARGV_OBJ = setargv$(o)\r
-.ENDIF\r
-\r
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \\r
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \\r
- Sys/Hostname Storable Filter/Util/Call Encode \\r
- Digest/MD5 PerlIO/Scalar MIME/Base64 Time/HiRes Time/Piece\r
-STATIC_EXT = DynaLoader\r
-NONXS_EXT = Errno\r
-\r
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader\r
-\r
-POD2HTML = $(PODDIR)\pod2html\r
-POD2MAN = $(PODDIR)\pod2man\r
-POD2LATEX = $(PODDIR)\pod2latex\r
-POD2TEXT = $(PODDIR)\pod2text\r
-\r
-# vars must be separated by "\t+~\t+", since we're using the tempfile\r
-# version of config_sh.pl (we were overflowing someone's buffer by\r
-# trying to fit them all on the command line)\r
-# -- BKS 10-17-1999\r
-CFG_VARS = \\r
- INST_DRV=$(INST_DRV) ~ \\r
- INST_TOP=$(INST_TOP:s/\/\\/) ~ \\r
- INST_VER=$(INST_VER:s/\/\\/) ~ \\r
- INST_ARCH=$(INST_ARCH) ~ \\r
- archname=$(ARCHNAME) ~ \\r
- cc=$(CC) ~ \\r
- ld=$(LINK32) ~ \\r
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \\r
- cf_email=$(EMAIL) ~ \\r
- d_crypt=$(D_CRYPT) ~ \\r
- d_mymalloc=$(PERL_MALLOC) ~ \\r
- libs=$(LIBFILES:f) ~ \\r
- incpath=$(CCINCDIR:s/\/\\/) ~ \\r
- libperl=$(PERLIMPLIB:f) ~ \\r
- libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \\r
- libc=$(LIBC) ~ \\r
- make=dmake ~ \\r
- _o=$(o) obj_ext=$(o) ~ \\r
- _a=$(a) lib_ext=$(a) ~ \\r
- static_ext=$(STATIC_EXT) ~ \\r
- use5005threads=$(USE_5005THREADS) ~ \\r
- useithreads=$(USE_ITHREADS) ~ \\r
- usethreads=$(USE_5005THREADS) ~ \\r
- usemultiplicity=$(USE_MULTI) ~ \\r
- useperlio=$(USE_PERLIO) ~ \\r
- LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \\r
- optimize=$(OPTIMIZE)\r
-\r
-#\r
-# set up targets varying between Win95 and WinNT builds\r
-#\r
-\r
-.IF "$(IS_WIN95)" == "define"\r
-MK2 = .\makefile.95\r
-RIGHTMAKE = __switch_makefiles\r
-NOOP = @rem\r
-.ELSE\r
-MK2 = __not_needed\r
-RIGHTMAKE =\r
-.ENDIF\r
-\r
-#\r
-# Top targets\r
-#\r
-\r
-all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \\r
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \\r
- $(X2P) Extensions \r
-\r
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c\r
-\r
-#----------------------------------------------------------------\r
-\r
-#-------------------- BEGIN Win95 SPECIFIC ----------------------\r
-\r
-# this target is a jump-off point for Win95\r
-# 1. it switches to the Win95-specific makefile if it exists\r
-# (__do_switch_makefiles)\r
-# 2. it prints a message when the Win95-specific one finishes (__done)\r
-# 3. it then kills this makefile by trying to make __no_such_target\r
-\r
-__switch_makefiles: __do_switch_makefiles __done __no_such_target\r
-\r
-__do_switch_makefiles:\r
-.IF "$(NOTFIRST)" != "true"\r
- if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true\r
-.ELSE\r
- $(NOOP)\r
-.ENDIF\r
-\r
-.IF "$(NOTFIRST)" != "true"\r
-__done:\r
- @echo Build process complete. Ignore any errors after this message.\r
- @echo Run "dmake test" to test and "dmake install" to install\r
-\r
-.ELSE\r
-# dummy targets for Win95-specific makefile\r
-\r
-__done:\r
- $(NOOP)\r
-\r
-__no_such_target:\r
- $(NOOP)\r
-\r
-.ENDIF\r
-\r
-# This target is used to generate the new makefile (.\makefile.95) for Win95\r
-\r
-.\makefile.95: .\makefile.mk\r
- $(MINIPERL) genmk95.pl makefile.mk $(MK2)\r
-\r
-#--------------------- END Win95 SPECIFIC ---------------------\r
-\r
-# a blank target for when builds don't need to do certain things\r
-# this target added for Win95 port but used to keep the WinNT port able to\r
-# use this file\r
-__not_needed:\r
- $(NOOP)\r
-\r
-$(GLOBEXE) : perlglob$(o)\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c\r
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \\r
- "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)\r
-.ELSE\r
- $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \\r
- perlglob$(o) setargv$(o)\r
-.ENDIF\r
-\r
-perlglob$(o) : perlglob.c\r
-\r
-config.w32 : $(CFGSH_TMPL)\r
- copy $(CFGSH_TMPL) config.w32\r
-\r
-.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)\r
- -del /f config.h\r
- copy $(CFGH_TMPL) config.h\r
-\r
-..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm\r
- $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \\r
- $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh\r
-\r
-# this target is for when changes to the main config.sh happen\r
-# edit config.{b,v,g}c and make this target once for each supported\r
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)\r
-regen_config_h:\r
- perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \\r
- $(CFGSH_TMPL) > ..\config.sh\r
- -cd .. && del /f perl.exe\r
- cd .. && perl configpm\r
- -del /f $(CFGH_TMPL)\r
- -mkdir $(COREDIR)\r
- -perl -I..\lib config_h.PL "INST_VER=$(INST_VER)"\r
- rename config.h $(CFGH_TMPL)\r
-\r
-$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl\r
- cd .. && miniperl configpm\r
- if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)\r
- $(XCOPY) ..\*.h $(COREDIR)\*.*\r
- $(XCOPY) *.h $(COREDIR)\*.*\r
- $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*\r
- $(RCOPY) include $(COREDIR)\*.*\r
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \\r
- || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)\r
-\r
-$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \\r
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
-.ELSE\r
- $(LINK32) -subsystem:console -out:$@ \\r
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))\r
-.ENDIF\r
-\r
-$(MINIDIR) :\r
- if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"\r
-\r
-$(MINICORE_OBJ) : $(CORE_NOCFG_H)\r
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c\r
-\r
-$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)\r
- $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c\r
-\r
-# -DPERL_IMPLICIT_SYS needs C++ for perllib.c\r
-# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless\r
-# unless the .IF is true), so instead we use a .ELSE with the default.\r
-# This is the only file that depends on perlhost.h, vmem.h, and vdir.h\r
-\r
-perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h\r
-.IF "$(USE_IMP_SYS)$(USE_OBJECT)" == "defineundef"\r
- $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c\r
-.ELSE\r
- $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c\r
-.ENDIF\r
-\r
-# 1. we don't want to rebuild miniperl.exe when config.h changes\r
-# 2. we don't want to rebuild miniperl.exe with non-default config.h\r
-$(MINI_OBJ) : $(CORE_NOCFG_H)\r
-\r
-$(WIN32_OBJ) : $(CORE_H)\r
-$(CORE_OBJ) : $(CORE_H)\r
-$(DLL_OBJ) : $(CORE_H)\r
-$(X2P_OBJ) : $(CORE_H)\r
-\r
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl\r
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \\r
- $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def\r
-\r
-$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(LINK32) -Tpd -ap $(BLINK_FLAGS) \\r
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \\r
- $@,\n \\r
- $(LIBFILES)\n \\r
- perldll.def\n)\r
- $(IMPLIB) $*.lib $@\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \\r
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
- dlltool --output-lib $(PERLIMPLIB) \\r
- --dllname $(PERLDLL:b).dll \\r
- --def perldll.def \\r
- --base-file perl.base \\r
- --output-exp perl.exp\r
- $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \\r
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \\r
- perl.exp $(LKPOST))\r
-.ELSE\r
- $(LINK32) -dll -def:perldll.def -out:$@ \\r
- @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \\r
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))\r
-.ENDIF\r
- $(XCOPY) $(PERLIMPLIB) $(COREDIR)\r
-\r
-$(MINIMOD) : $(MINIPERL) ..\minimod.pl\r
- cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm\r
-\r
-..\x2p\a2p$(o) : ..\x2p\a2p.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c\r
-\r
-..\x2p\hash$(o) : ..\x2p\hash.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c\r
-\r
-..\x2p\str$(o) : ..\x2p\str.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c\r
-\r
-..\x2p\util$(o) : ..\x2p\util.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c\r
-\r
-..\x2p\walk$(o) : ..\x2p\walk.c\r
- $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c\r
-\r
-$(X2P) : $(MINIPERL) $(X2P_OBJ)\r
- $(MINIPERL) ..\x2p\find2perl.PL\r
- $(MINIPERL) ..\x2p\s2p.PL\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) -v -o $@ $(BLINK_FLAGS) \\r
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))\r
-.ELSE\r
- $(LINK32) -subsystem:console -out:$@ \\r
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))\r
-.ENDIF\r
-\r
-perlmain.c : runperl.c\r
- copy runperl.c perlmain.c\r
-\r
-perlmain$(o) : perlmain.c\r
- $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c\r
-\r
-$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(LINK32) -Tpe -ap $(BLINK_FLAGS) \\r
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \\r
- $(@:s,\,\\),\n \\r
- $(PERLIMPLIB) $(LIBFILES)\n)\r
-.ELIF "$(CCTYPE)" == "GCC"\r
- $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \\r
- $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)\r
-.ELSE\r
- $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \\r
- $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)\r
-.ENDIF\r
- copy $(PERLEXE) $(WPERLEXE)\r
- $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS\r
- copy splittree.pl ..\r
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
-\r
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)\r
- if not exist $(AUTODIR) mkdir $(AUTODIR)\r
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL\r
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL\r
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)\r
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)\r
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c\r
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .\r
-\r
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs\r
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs\r
-\r
-#----------------------------------------------------------------------------------\r
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM) \r
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)\r
-\r
-Extensions_clean : \r
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean\r
-\r
-#----------------------------------------------------------------------------------\r
-\r
-\r
-doc: $(PERLEXE)\r
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \\r
- --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\\r
- --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse\r
-\r
-utils: $(PERLEXE) $(X2P)\r
- cd ..\utils && $(MAKE) PERL=$(MINIPERL)\r
- copy ..\README.aix ..\pod\perlaix.pod\r
- copy ..\README.amiga ..\pod\perlamiga.pod\r
- copy ..\README.apollo ..\pod\perlapollo.pod\r
- copy ..\README.beos ..\pod\perlbeos.pod\r
- copy ..\README.bs2000 ..\pod\perlbs2000.pod\r
- copy ..\README.cygwin ..\pod\perlcygwin.pod\r
- copy ..\README.dgux ..\pod\perldgux.pod\r
- copy ..\README.dos ..\pod\perldos.pod\r
- copy ..\README.epoc ..\pod\perlepoc.pod\r
- copy ..\README.hpux ..\pod\perlhpux.pod\r
- copy ..\README.hurd ..\pod\perlhurd.pod\r
- copy ..\README.machten ..\pod\perlmachten.pod\r
- copy ..\README.macos ..\pod\perlmacos.pod\r
- copy ..\README.mint ..\pod\perlmint.pod\r
- copy ..\README.mpeix ..\pod\perlmpeix.pod\r
- copy ..\README.netware ..\pod\perlnetware.pod\r
- copy ..\README.os2 ..\pod\perlos2.pod\r
- copy ..\README.os390 ..\pod\perlos390.pod\r
- copy ..\README.plan9 ..\pod\perlplan9.pod\r
- copy ..\README.qnx ..\pod\perlqnx.pod\r
- copy ..\README.solaris ..\pod\perlsolaris.pod\r
- copy ..\README.tru64 ..\pod\perltru64.pod\r
- copy ..\README.uts ..\pod\perluts.pod\r
- copy ..\README.vmesa ..\pod\perlvmesa.pod\r
- copy ..\vms\perlvms.pod ..\pod\perlvms.pod\r
- copy ..\README.vos ..\pod\perlvos.pod\r
- copy ..\README.win32 ..\pod\perlwin32.pod\r
- cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters\r
- cd ..\lib && $(PERLEXE) lib_pm.PL\r
- $(PERLEXE) $(PL2BAT) $(UTILS)\r
-\r
-distclean: clean\r
- -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \\r
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)\r
- -del /f *.def *.map\r
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs\r
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm\r
- -del /f $(LIBDIR)\XSLoader.pm\r
- -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm\r
- -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm $(LIBDIR)\Thread.pm\r
- -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm\r
- -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm\r
- -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm\r
- -del /f $(LIBDIR)\PerlIO\Scalar.pm\r
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm\r
- -del /f $(LIBDIR)\File\Glob.pm\r
- -del /f $(LIBDIR)\Storable.pm\r
- -del /f $(LIBDIR)\Filter\Util\Call.pm\r
- -del /f $(LIBDIR)\Digest\MD5.pm\r
- -del /f $(LIBDIR)\MIME\Base64.pm\r
- -del /f $(LIBDIR)\MIME\QuotedPrint.pm\r
- -del /f $(LIBDIR)\Time\HiRes.pm\r
- -del /f $(LIBDIR)\List\Util.pm\r
- -del /f $(LIBDIR)\Scalar\Util.pm\r
- -del /f $(LIBDIR)\Time\Piece.pm\r
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO || rmdir /s $(LIBDIR)\IO\r
- -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread || rmdir /s $(LIBDIR)\Thread\r
- -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B || rmdir /s $(LIBDIR)\B\r
- -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data || rmdir /s $(LIBDIR)\Data\r
- -if exist $(LIBDIR)\Filter\Util\Call rmdir /s /q $(LIBDIR)\Filter\Util\Call || rmdir /s $(LIBDIR)\Filter\r
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util || rmdir /s $(LIBDIR)\Filter\r
- -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest || rmdir /s $(LIBDIR)\Digest\r
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME || rmdir /s $(LIBDIR)\MIME\r
- -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List || rmdir /s $(LIBDIR)\List\r
- -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar || rmdir /s $(LIBDIR)\Scalar\r
- -cd $(PODDIR) && del /f *.html *.bat checkpods \\r
- perlaix.pod perlamiga.pod perlapollo.pod \\r
- perlbeos.pod perlbs2000.pod perlcygwin.pod perldgux.pod \\r
- perldos.pod perlepoc.pod perlhpux.pod perlhurd.pod \\r
- perlmachten.pod perlmint.pod \\r
- perlmacos.pod perlmpeix.pod perlnetware.pod \\r
- perlos2.pod perlos390.pod \\r
- perlplan9.pod perlqnx.pod \\r
- perlsolaris.pod perltru64.pod perluts.pod \\r
- perlvmesa.pod perlvms.pod perlvos.pod \\r
- perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \\r
- podchecker podselect\r
- -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph h2xs perldoc \\r
- dprofpp *.bat\r
- -cd ..\x2p && del /f find2perl s2p *.bat\r
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new\r
- -del /f $(CONFIGPM)\r
- -del /f bin\*.bat\r
- -cd $(EXTDIR) && del /s *$(a) *.def *.map *.pdb *.bs Makefile *$(o) \\r
- pm_to_blib\r
- -if exist $(AUTODIR) rmdir /s /q $(AUTODIR) || rmdir /s $(AUTODIR)\r
- -if exist $(COREDIR) rmdir /s /q $(COREDIR) || rmdir /s $(COREDIR)\r
-\r
-install : all installbare installhtml\r
-\r
-installbare : $(RIGHTMAKE) utils\r
- $(PERLEXE) ..\installperl\r
- if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*\r
- $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*\r
- $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*\r
-\r
-installhtml : doc\r
- $(RCOPY) html\*.* $(INST_HTML)\*.*\r
-\r
-inst_lib : $(CONFIGPM)\r
- copy splittree.pl ..\r
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)\r
- $(RCOPY) ..\lib $(INST_LIB)\*.*\r
-\r
-minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils\r
- $(XCOPY) $(MINIPERL) ..\t\perl.exe\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
-.ELSE\r
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
-.ENDIF\r
- attrib -r ..\t\*.*\r
- copy test ..\t\r
- cd ..\t && \\r
- $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t\r
-\r
-test-prep : all utils\r
- $(XCOPY) $(PERLEXE) ..\t\$(NULL)\r
- $(XCOPY) $(PERLDLL) ..\t\$(NULL)\r
-.IF "$(CCTYPE)" == "BORLAND"\r
- $(XCOPY) $(GLOBBAT) ..\t\$(NULL)\r
-.ELSE\r
- $(XCOPY) $(GLOBEXE) ..\t\$(NULL)\r
-.ENDIF\r
-\r
-test : $(RIGHTMAKE) test-prep\r
- cd ..\t && $(PERLEXE) -I..\lib harness\r
-\r
-test-notty : test-prep\r
- set PERL_SKIP_TTY_TEST=1 && \\r
- cd ..\t && $(PERLEXE) -I.\lib harness\r
-\r
-test-wide : test-prep\r
- set HARNESS_PERL_SWITCHES=-C && \\r
- cd ..\t && $(PERLEXE) -I..\lib harness\r
-\r
-test-wide-notty : test-prep\r
- set PERL_SKIP_TTY_TEST=1 && \\r
- set HARNESS_PERL_SWITCHES=-C && \\r
- cd ..\t && $(PERLEXE) -I..\lib harness\r
-\r
-clean : Extensions_clean\r
- -@erase miniperlmain$(o)\r
- -@erase $(MINIPERL)\r
- -@erase perlglob$(o)\r
- -@erase perlmain$(o)\r
- -@erase config.w32\r
- -@erase /f config.h\r
- -@erase $(GLOBEXE)\r
- -@erase $(PERLEXE)\r
- -@erase $(WPERLEXE)\r
- -@erase $(PERLDLL)\r
- -@erase $(CORE_OBJ)\r
- -if exist $(MINIDIR) rmdir /s /q $(MINIDIR) || rmdir /s $(MINIDIR)\r
- -@erase $(WIN32_OBJ)\r
- -@erase $(DLL_OBJ)\r
- -@erase $(X2P_OBJ)\r
- -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res\r
- -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat\r
- -@erase ..\x2p\*.exe ..\x2p\*.bat\r
- -@erase *.ilk\r
- -@erase *.pdb\r
-\r
-# Handy way to run perlbug -ok without having to install and run the\r
-# installed perlbug. We don't re-run the tests here - we trust the user.\r
-# Please *don't* use this unless all tests pass.\r
-# If you want to report test failures, use "dmake nok" instead.\r
-ok: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"\r
-\r
-okfile: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok\r
-\r
-nok: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"\r
-\r
-nokfile: utils\r
- $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok\r
+#
+# Makefile to build perl on Windows NT using DMAKE.
+# Supported compilers:
+# Visual C++ 2.0 through 6.0 (and possibly newer versions)
+# Borland C++ 5.02
+# Mingw32 with gcc-2.95.2 or better **experimental**
+# MS Platform SDK 64-bit compiler and tools **experimental**
+#
+# This is set up to build a perl.exe that runs off a shared library
+# (perl59.dll). Also makes individual DLLs for the XS extensions.
+#
+
+##
+## Make sure you read README.win32 *before* you mess with anything here!
+##
+
+##
+## Build configuration. Edit the values below to suit your needs.
+##
+
+#
+# Set these to wherever you want "dmake install" to put your
+# newly built perl.
+#
+INST_DRV *= c:
+INST_TOP *= $(INST_DRV)\perl
+
+#
+# Comment this out if you DON'T want your perl installation to be versioned.
+# This means that the new installation will overwrite any files from the
+# old installation at the same INST_TOP location. Leaving it enabled is
+# the safest route, as perl adds the extra version directory to all the
+# locations it installs files to. If you disable it, an alternative
+# versioned installation can be obtained by setting INST_TOP above to a
+# path that includes an arbitrary version string.
+#
+INST_VER *= \5.9.0
+
+#
+# Comment this out if you DON'T want your perl installation to have
+# architecture specific components. This means that architecture-
+# specific files will be installed along with the architecture-neutral
+# files. Leaving it enabled is safer and more flexible, in case you
+# want to build multiple flavors of perl and install them together in
+# the same location. Commenting it out gives you a simpler
+# installation that is easier to understand for beginners.
+#
+INST_ARCH *= \$(ARCHNAME)
+
+#
+# uncomment to enable multiple interpreters. This is need for fork()
+# emulation and for thread support.
+#
+USE_MULTI *= define
+
+#
+# Interpreter cloning/threads; now reasonably complete.
+# This should be enabled to get the fork() emulation.
+# This needs USE_MULTI above.
+#
+USE_ITHREADS *= define
+
+#
+# uncomment to enable the implicit "host" layer for all system calls
+# made by perl. This needs USE_MULTI above.
+# This is also needed to get fork().
+#
+USE_IMP_SYS *= define
+
+#
+# Comment out next assign to disable perl's I/O subsystem and use compiler's
+# stdio for IO - depending on your compiler vendor and run time library you may
+# then get a number of fails from make test i.e. bugs - complain to them not us ;-).
+# You will also be unable to take full advantage of perl5.8's support for multiple
+# encodings and may see lower IO performance. You have been warned.
+USE_PERLIO *= define
+
+#
+# Comment this out if you don't want to enable large file support for
+# some reason. Should normally only be changed to maintain compatibility
+# with an older release of perl.
+USE_LARGE_FILES *= define
+
+#
+# uncomment exactly one of the following
+#
+# Visual C++ 2.x
+#CCTYPE *= MSVC20
+# Visual C++ > 2.x and < 6.x
+#CCTYPE *= MSVC
+# Visual C++ >= 6.x
+CCTYPE *= MSVC60
+# Borland 5.02 or later
+#CCTYPE *= BORLAND
+# mingw32+gcc-2.95.2 or better
+#CCTYPE *= GCC
+# Uncomment this if you are using the latest MinGW release (2.0.0)
+# with gcc3.2
+#USE_GCC_V3_2 *= define
+
+#
+# uncomment this if your Borland compiler is older than v5.4.
+#BCCOLD = define
+#
+# uncomment this if you want to use Borland's VCL as your CRT
+#BCCVCL = define
+
+#
+# uncomment this if you are compiling under Windows 95/98 and command.com
+# (not needed if you're running under 4DOS/NT 6.01 or later)
+#IS_WIN95 *= define
+
+#
+# uncomment next line if you want debug version of perl (big,slow)
+# If not enabled, we automatically try to use maximum optimization
+# with all compilers that are known to have a working optimizer.
+#
+#CFG *= Debug
+
+#
+# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
+# It has patches that fix known bugs in older versions of MSVCRT.DLL.
+# This currently requires VC 5.0 with Service Pack 3 or later.
+# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
+# and follow the directions in the package to install.
+#
+# Not recommended if you have VC 6.x and you're not running Windows 9x.
+#
+#USE_PERLCRT *= define
+
+#
+# uncomment to enable linking with setargv.obj under the Visual C
+# compiler. Setting this options enables perl to expand wildcards in
+# arguments, but it may be harder to use alternate methods like
+# File::DosGlob that are more powerful. This option is supported only with
+# Visual C.
+#
+#USE_SETARGV *= define
+
+#
+# if you want to have the crypt() builtin function implemented, leave this or
+# CRYPT_LIB uncommented. The fcrypt.c file named here contains a suitable
+# version of des_fcrypt().
+#
+CRYPT_SRC *= fcrypt.c
+
+#
+# if you didn't set CRYPT_SRC and if you have des_fcrypt() available in a
+# library, uncomment this, and make sure the library exists (see README.win32)
+# Specify the full pathname of the library.
+#
+#CRYPT_LIB *= fcrypt.lib
+
+#
+# set this if you wish to use perl's malloc
+# WARNING: Turning this on/off WILL break binary compatibility with extensions
+# you may have compiled with/without it. Be prepared to recompile all
+# extensions if you change the default. Currently, this cannot be enabled
+# if you ask for USE_IMP_SYS above.
+#
+#PERL_MALLOC *= define
+
+#
+# set the install locations of the compiler include/libraries
+# Running VCVARS32.BAT is *required* when using Visual C.
+# Some versions of Visual C don't define MSVCDIR in the environment,
+# so you may have to set CCHOME explicitly (spaces in the path name should
+# not be quoted)
+#
+.IF "$(CCTYPE)" == "BORLAND"
+CCHOME *= C:\borland\bcc55
+.ELIF "$(CCTYPE)" == "GCC"
+CCHOME *= C:\MinGW
+.ELSE
+CCHOME *= $(MSVCDIR)
+.ENDIF
+CCINCDIR *= $(CCHOME)\include
+CCLIBDIR *= $(CCHOME)\lib
+
+#
+# Additional compiler flags can be specified here.
+#
+
+#
+# This should normally be disabled. Adding -DPERL_POLLUTE enables support
+# for old symbols by default, at the expense of extreme pollution. You most
+# probably just want to build modules that won't compile with
+# perl Makefile.PL POLLUTE=1
+# instead of enabling this. Please report such modules to the respective
+# authors.
+#
+#BUILDOPT += -DPERL_POLLUTE
+
+#
+# This should normally be disabled. Enabling it will disable the File::Glob
+# implementation of CORE::glob.
+#
+#BUILDOPT += -DPERL_EXTERNAL_GLOB
+
+#
+# This should normally be disabled. Enabling it causes perl to read scripts
+# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
+
+#
+# specify semicolon-separated list of extra directories that modules will
+# look for libraries (spaces in path names need not be quoted)
+#
+EXTRALIBDIRS *=
+
+#
+# set this to point to cmd.exe (only needed if you use some
+# alternate shell that doesn't grok cmd.exe style commands)
+#
+#SHELL *= g:\winnt\system32\cmd.exe
+
+#
+# set this to your email address (perl will guess a value from
+# from your loginname and your hostname, which may not be right)
+#
+#EMAIL *=
+
+##
+## Build configuration ends.
+##
+
+##################### CHANGE THESE ONLY IF YOU MUST #####################
+
+.IF "$(CRYPT_SRC)$(CRYPT_LIB)" == ""
+D_CRYPT = undef
+.ELSE
+D_CRYPT = define
+CRYPT_FLAG = -DHAVE_DES_FCRYPT
+.ENDIF
+
+PERL_MALLOC *= undef
+
+USE_MULTI *= undef
+USE_ITHREADS *= undef
+USE_IMP_SYS *= undef
+USE_PERLIO *= undef
+USE_LARGE_FILES *= undef
+USE_PERLCRT *= undef
+
+.IF "$(USE_IMP_SYS)$(USE_MULTI)" == "defineundef"
+USE_MULTI != define
+.ENDIF
+
+.IF "$(USE_ITHREADS)$(USE_MULTI)" == "defineundef"
+USE_MULTI != define
+.ENDIF
+
+.IF "$(USE_MULTI)" != "undef"
+BUILDOPT += -DPERL_IMPLICIT_CONTEXT
+.ENDIF
+
+.IF "$(USE_IMP_SYS)" != "undef"
+BUILDOPT += -DPERL_IMPLICIT_SYS
+.ENDIF
+
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
+
+PROCESSOR_ARCHITECTURE *= x86
+
+.IF "$(WIN64)" == ""
+.IF "$(PROCESSOR_ARCHITEW6432)" != ""
+PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
+WIN64 = define
+.ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+WIN64 = define
+.ELSE
+WIN64 = undef
+.ENDIF
+.ENDIF
+
+.IF "$(USE_MULTI)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+.ELSE
+.IF "$(USE_PERLIO)" == "define"
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+.ELSE
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+.ENDIF
+
+.IF "$(USE_ITHREADS)" == "define"
+ARCHNAME !:= $(ARCHNAME)-thread
+.ENDIF
+
+# Visual Studio 98 specific
+.IF "$(CCTYPE)" == "MSVC60"
+
+# VC 6.0 can load the socket dll on demand. Makes the test suite
+# run in about 10% less time.
+DELAYLOAD *= -DELAYLOAD:wsock32.dll -DELAYLOAD:shell32.dll delayimp.lib
+
+.IF "$(CFG)" == "Debug"
+.ELSE
+# VC 6.0 seems capable of compiling perl correctly with optimizations
+# enabled. Anything earlier fails tests.
+CFG *= Optimize
+.ENDIF
+.ENDIF
+
+ARCHDIR = ..\lib\$(ARCHNAME)
+COREDIR = ..\lib\CORE
+AUTODIR = ..\lib\auto
+LIBDIR = ..\lib
+EXTDIR = ..\ext
+PODDIR = ..\pod
+EXTUTILSDIR = $(LIBDIR)\ExtUtils
+
+#
+INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
+INST_BIN = $(INST_SCRIPT)$(INST_ARCH)
+INST_LIB = $(INST_TOP)$(INST_VER)\lib
+INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
+INST_COREDIR = $(INST_ARCHLIB)\CORE
+INST_POD = $(INST_LIB)\pod
+INST_HTML = $(INST_TOP)$(INST_VER)\html
+
+#
+# Programs to compile, build .lib files and link
+#
+
+.USESHELL :
+
+.IF "$(CCTYPE)" == "BORLAND"
+
+CC = bcc32
+.IF "$(BCCOLD)" != "define"
+LINK32 = ilink32
+.ELSE
+LINK32 = tlink32
+.ENDIF
+LIB32 = tlib /P128
+IMPLIB = implib -c
+RSC = rc
+
+#
+# Options
+#
+INCLUDES = -I$(COREDIR) -I.\include -I. -I.. -I"$(CCINCDIR)"
+#PCHFLAGS = -H -Hc -H=c:\temp\bcmoduls.pch
+DEFINES = -DWIN32 $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -P
+
+LIBC = cw32mti.lib
+LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
+
+.IF "$(CFG)" == "Debug"
+OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
+LINK_DBG = -v
+.ELSE
+OPTIMIZE = -O2 -D_RTLDLL
+LINK_DBG =
+.ENDIF
+
+CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+OBJOUT_FLAG = -o
+EXEOUT_FLAG = -e
+LIBOUT_FLAG =
+.IF "$(BCCOLD)" != "define"
+LINK_FLAGS += -Gn
+DEFINES += -D_MT -D__USELOCALES__ -D_WIN32_WINNT=0x0410
+.END
+.IF "$(BCCVCL)" == "define"
+LIBC = cp32mti.lib vcl.lib vcl50.lib vclx50.lib vcle50.lib
+LINK_FLAGS += -L"$(CCLIBDIR)\Release"
+.END
+
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CC = gcc
+LINK32 = gcc
+.IF "$(USE_GCC_V3_2)" == "define"
+LINK32 = g++
+.END
+LIB32 = ar rc
+IMPLIB = dlltool
+RSC = rc
+
+i = .i
+o = .o
+a = .a
+
+#
+# Options
+#
+
+INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
+DEFINES = -DWIN32 $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -xc++
+
+LIBC = -lmsvcrt
+
+# same libs as MSVC
+LIBFILES = $(CRYPT_LIB) $(LIBC) \
+ -lmoldname -lkernel32 -luser32 -lgdi32 \
+ -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
+ -loleaut32 -lnetapi32 -luuid -lwsock32 -lmpr \
+ -lwinmm -lversion -lodbc32
+
+.IF "$(CFG)" == "Debug"
+OPTIMIZE = -g -O2 -DDEBUGGING
+LINK_DBG = -g
+.ELSE
+OPTIMIZE = -g -O2
+LINK_DBG = -g
+.ENDIF
+
+CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+OBJOUT_FLAG = -o
+EXEOUT_FLAG = -o
+LIBOUT_FLAG =
+
+# NOTE: we assume that GCC uses MSVCRT.DLL
+BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
+
+.ELSE
+
+CC = cl
+LINK32 = link
+LIB32 = $(LINK32) -lib
+RSC = rc
+
+#
+# Options
+#
+
+INCLUDES = -I$(COREDIR) -I.\include -I. -I..
+#PCHFLAGS = -Fpc:\temp\vcmoduls.pch -YX
+DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
+LOCDEFS = -DPERLDLL -DPERL_CORE
+SUBSYS = console
+CXX_FLAG = -TP -GX
+
+.IF "$(USE_PERLCRT)" != "define"
+LIBC = msvcrt.lib
+.ELSE
+LIBC = PerlCRT.lib
+.ENDIF
+
+PERLEXE_RES =
+PERLDLL_RES =
+
+.IF "$(CFG)" == "Debug"
+.IF "$(CCTYPE)" == "MSVC20"
+OPTIMIZE = -Od -MD -Z7 -DDEBUGGING
+.ELSE
+OPTIMIZE = -O1 -MD -Zi -DDEBUGGING
+.ENDIF
+LINK_DBG = -debug
+.ELSE
+OPTIMIZE = -MD -DNDEBUG
+LINK_DBG = -release
+.IF "$(WIN64)" == "define"
+# enable Whole Program Optimizations (WPO) and Link Time Code Generation (LTCG)
+OPTIMIZE += -Ox -GL
+LINK_DBG += -ltcg
+.ELSE
+# -O1 yields smaller code, which turns out to be faster than -O2 on x86
+OPTIMIZE += -O1
+#OPTIMIZE += -O2
+.ENDIF
+.ENDIF
+
+.IF "$(WIN64)" == "define"
+DEFINES += -DWIN64 -DCONSERVATIVE
+OPTIMIZE += -Wp64 -Op
+.ENDIF
+
+.IF "$(USE_PERLCRT)" != "define"
+BUILDOPT += -DPERL_MSVCRT_READFIX
+.ENDIF
+
+LIBBASEFILES = $(CRYPT_LIB) \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib wsock32.lib mpr.lib winmm.lib \
+ version.lib
+
+# win64 doesn't have some libs
+.IF "$(WIN64)" != "define"
+LIBBASEFILES += odbc32.lib odbccp32.lib
+.ENDIF
+
+# we add LIBC here, since we may be using PerlCRT.dll
+LIBFILES = $(LIBBASEFILES) $(LIBC)
+
+CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+ $(PCHFLAGS) $(OPTIMIZE)
+LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
+ -libpath:"$(INST_COREDIR)" \
+ -machine:$(PROCESSOR_ARCHITECTURE)
+OBJOUT_FLAG = -Fo
+EXEOUT_FLAG = -Fe
+LIBOUT_FLAG = /out:
+
+.ENDIF
+
+CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+
+# used to allow local linking flags that are not propogated into Config.pm,
+# currently unused
+# -- BKS, 12-12-1999
+PRIV_LINK_FLAGS *=
+BLINK_FLAGS = $(PRIV_LINK_FLAGS) $(LINK_FLAGS)
+
+#################### do not edit below this line #######################
+############# NO USER-SERVICEABLE PARTS BEYOND THIS POINT ##############
+
+o *= .obj
+a *= .lib
+
+LKPRE = INPUT (
+LKPOST = )
+
+#
+# Rules
+#
+
+.SUFFIXES : .c .i $(o) .dll $(a) .exe .rc .res
+
+.c$(o):
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) $(OBJOUT_FLAG)$@ $<
+
+.c.i:
+ $(CC) -c $(null,$(<:d) $(NULL) -I$(<:d)) $(CFLAGS_O) -E $< >$@
+
+.y.c:
+ $(NOOP)
+
+$(o).dll:
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) c0d32$(o) $<,$@,,$(LIBFILES),$(*B).def
+ $(IMPLIB) $(*B).lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -o $@ $(BLINK_FLAGS) $< $(LIBFILES)
+ $(IMPLIB) --input-def $(*B).def --output-lib $(*B).a $@
+.ELSE
+ $(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
+ -out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+.ENDIF
+
+.rc.res:
+ $(RSC) -i.. $<
+
+#
+# various targets
+MINIPERL = ..\miniperl.exe
+MINIDIR = .\mini
+PERLEXE = ..\perl.exe
+WPERLEXE = ..\wperl.exe
+GLOBEXE = ..\perlglob.exe
+CONFIGPM = ..\lib\Config.pm
+MINIMOD = ..\lib\ExtUtils\Miniperl.pm
+X2P = ..\x2p\a2p.exe
+
+# Nominate a target which causes extensions to be re-built
+# This used to be $(PERLEXE), but at worst it is the .dll that they depend
+# on and really only the interface - i.e. the .def file used to export symbols
+# from the .dll
+PERLDEP = perldll.def
+
+
+PL2BAT = bin\pl2bat.pl
+GLOBBAT = bin\perlglob.bat
+
+UTILS = \
+ ..\utils\h2ph \
+ ..\utils\splain \
+ ..\utils\dprofpp \
+ ..\utils\perlbug \
+ ..\utils\pl2pm \
+ ..\utils\c2ph \
+ ..\utils\pstruct \
+ ..\utils\h2xs \
+ ..\utils\perldoc \
+ ..\utils\perlcc \
+ ..\utils\perlivp \
+ ..\utils\libnetcfg \
+ ..\utils\enc2xs \
+ ..\utils\piconv \
+ ..\utils\cpan \
+ ..\pod\checkpods \
+ ..\pod\pod2html \
+ ..\pod\pod2latex \
+ ..\pod\pod2man \
+ ..\pod\pod2text \
+ ..\pod\pod2usage \
+ ..\pod\podchecker \
+ ..\pod\podselect \
+ ..\x2p\find2perl \
+ ..\x2p\psed \
+ ..\x2p\s2p \
+ ..\lib\ExtUtils\xsubpp \
+ bin\exetype.pl \
+ bin\runperl.pl \
+ bin\pl2bat.pl \
+ bin\perlglob.pl \
+ bin\search.pl
+
+.IF "$(CCTYPE)" == "BORLAND"
+
+CFGSH_TMPL = config.bc
+CFGH_TMPL = config_H.bc
+
+.ELIF "$(CCTYPE)" == "GCC"
+
+CFGSH_TMPL = config.gc
+CFGH_TMPL = config_H.gc
+PERLIMPLIB = ..\libperl59$(a)
+
+.ELSE
+
+.IF "$(WIN64)" == "define"
+CFGSH_TMPL = config.vc64
+CFGH_TMPL = config_H.vc64
+.ELSE
+CFGSH_TMPL = config.vc
+CFGH_TMPL = config_H.vc
+.ENDIF
+
+.ENDIF
+
+# makedef.pl must be updated if this changes, and this should normally
+# only change when there is an incompatible revision of the public API.
+PERLIMPLIB *= ..\perl59$(a)
+PERLDLL = ..\perl59.dll
+
+XCOPY = xcopy /f /r /i /d
+RCOPY = xcopy /f /r /i /e /d
+NOOP = @echo
+
+#
+# filenames given to xsubpp must have forward slashes (since it puts
+# full pathnames in #line strings)
+XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
+ -C++ -prototypes
+
+MICROCORE_SRC = \
+ ..\av.c \
+ ..\deb.c \
+ ..\doio.c \
+ ..\doop.c \
+ ..\dump.c \
+ ..\globals.c \
+ ..\gv.c \
+ ..\hv.c \
+ ..\locale.c \
+ ..\mg.c \
+ ..\numeric.c \
+ ..\op.c \
+ ..\pad.c \
+ ..\perl.c \
+ ..\perlapi.c \
+ ..\perly.c \
+ ..\pp.c \
+ ..\pp_ctl.c \
+ ..\pp_hot.c \
+ ..\pp_pack.c \
+ ..\pp_sort.c \
+ ..\pp_sys.c \
+ ..\reentr.c \
+ ..\regcomp.c \
+ ..\regexec.c \
+ ..\run.c \
+ ..\scope.c \
+ ..\sv.c \
+ ..\taint.c \
+ ..\toke.c \
+ ..\universal.c \
+ ..\utf8.c \
+ ..\util.c \
+ ..\xsutils.c
+
+EXTRACORE_SRC += perllib.c
+
+.IF "$(PERL_MALLOC)" == "define"
+EXTRACORE_SRC += ..\malloc.c
+.ENDIF
+
+EXTRACORE_SRC += ..\perlio.c
+
+WIN32_SRC = \
+ .\win32.c \
+ .\win32sck.c \
+ .\win32thread.c
+
+# We need this for miniperl build unless we override canned
+# config.h #define building mini\*
+#.IF "$(USE_PERLIO)" == "define"
+WIN32_SRC += .\win32io.c
+#.ENDIF
+
+.IF "$(CRYPT_SRC)" != ""
+WIN32_SRC += .\$(CRYPT_SRC)
+.ENDIF
+
+DLL_SRC = $(DYNALOADER).c
+
+X2P_SRC = \
+ ..\x2p\a2p.c \
+ ..\x2p\hash.c \
+ ..\x2p\str.c \
+ ..\x2p\util.c \
+ ..\x2p\walk.c
+
+CORE_NOCFG_H = \
+ ..\av.h \
+ ..\cop.h \
+ ..\cv.h \
+ ..\dosish.h \
+ ..\embed.h \
+ ..\form.h \
+ ..\gv.h \
+ ..\handy.h \
+ ..\hv.h \
+ ..\iperlsys.h \
+ ..\mg.h \
+ ..\nostdio.h \
+ ..\op.h \
+ ..\opcode.h \
+ ..\perl.h \
+ ..\perlapi.h \
+ ..\perlsdio.h \
+ ..\perlsfio.h \
+ ..\perly.h \
+ ..\pp.h \
+ ..\proto.h \
+ ..\regexp.h \
+ ..\scope.h \
+ ..\sv.h \
+ ..\thread.h \
+ ..\unixish.h \
+ ..\utf8.h \
+ ..\util.h \
+ ..\warnings.h \
+ ..\XSUB.h \
+ ..\EXTERN.h \
+ ..\perlvars.h \
+ ..\intrpvar.h \
+ ..\thrdvar.h \
+ .\include\dirent.h \
+ .\include\netdb.h \
+ .\include\sys\socket.h \
+ .\win32.h
+
+CORE_H = $(CORE_NOCFG_H) .\config.h
+
+MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
+CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
+WIN32_OBJ = $(WIN32_SRC:db:+$(o))
+MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
+MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
+MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
+DLL_OBJ = $(DLL_SRC:db:+$(o))
+X2P_OBJ = $(X2P_SRC:db:+$(o))
+
+PERLDLL_OBJ = $(CORE_OBJ)
+PERLEXE_OBJ = perlmain$(o)
+
+PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
+
+.IF "$(USE_SETARGV)" != ""
+SETARGV_OBJ = setargv$(o)
+.ENDIF
+
+DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
+ Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
+ Sys/Hostname Storable Filter/Util/Call Encode \
+ Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize
+STATIC_EXT = DynaLoader
+NONXS_EXT = Errno
+
+DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+
+POD2HTML = $(PODDIR)\pod2html
+POD2MAN = $(PODDIR)\pod2man
+POD2LATEX = $(PODDIR)\pod2latex
+POD2TEXT = $(PODDIR)\pod2text
+
+# vars must be separated by "\t+~\t+", since we're using the tempfile
+# version of config_sh.pl (we were overflowing someone's buffer by
+# trying to fit them all on the command line)
+# -- BKS 10-17-1999
+CFG_VARS = \
+ INST_DRV=$(INST_DRV) ~ \
+ INST_TOP=$(INST_TOP:s/\/\\/) ~ \
+ INST_VER=$(INST_VER:s/\/\\/) ~ \
+ INST_ARCH=$(INST_ARCH) ~ \
+ archname=$(ARCHNAME) ~ \
+ cc=$(CC) ~ \
+ ld=$(LINK32) ~ \
+ ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ cf_email=$(EMAIL) ~ \
+ d_crypt=$(D_CRYPT) ~ \
+ d_mymalloc=$(PERL_MALLOC) ~ \
+ libs=$(LIBFILES:f) ~ \
+ incpath=$(CCINCDIR:s/\/\\/) ~ \
+ libperl=$(PERLIMPLIB:f) ~ \
+ libpth=$(CCLIBDIR:s/\/\\/);$(EXTRALIBDIRS:s/\/\\/) ~ \
+ libc=$(LIBC) ~ \
+ make=dmake ~ \
+ _o=$(o) ~ \
+ obj_ext=$(o) ~ \
+ _a=$(a) ~ \
+ lib_ext=$(a) ~ \
+ static_ext=$(STATIC_EXT) ~ \
+ usethreads=$(USE_ITHREADS) ~ \
+ useithreads=$(USE_ITHREADS) ~ \
+ usemultiplicity=$(USE_MULTI) ~ \
+ useperlio=$(USE_PERLIO) ~ \
+ uselargefiles=$(USE_LARGE_FILES) ~ \
+ LINK_FLAGS=$(LINK_FLAGS:s/\/\\/) ~ \
+ optimize=$(OPTIMIZE)
+
+#
+# set up targets varying between Win95 and WinNT builds
+#
+
+.IF "$(IS_WIN95)" == "define"
+MK2 = .\makefile.95
+RIGHTMAKE = __switch_makefiles
+NOOP = @rem
+.ELSE
+MK2 = __not_needed
+RIGHTMAKE =
+.ENDIF
+
+#
+# Top targets
+#
+
+all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(PERLEXE) \
+ $(X2P) Extensions
+
+$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+
+#----------------------------------------------------------------
+
+#-------------------- BEGIN Win95 SPECIFIC ----------------------
+
+# this target is a jump-off point for Win95
+# 1. it switches to the Win95-specific makefile if it exists
+# (__do_switch_makefiles)
+# 2. it prints a message when the Win95-specific one finishes (__done)
+# 3. it then kills this makefile by trying to make __no_such_target
+
+__switch_makefiles: __do_switch_makefiles __done __no_such_target
+
+__do_switch_makefiles:
+.IF "$(NOTFIRST)" != "true"
+ if exist $(MK2) $(MAKE:s/-S//) -f $(MK2) $(MAKETARGETS) NOTFIRST=true
+.ELSE
+ $(NOOP)
+.ENDIF
+
+.IF "$(NOTFIRST)" != "true"
+__done:
+ @echo Build process complete. Ignore any errors after this message.
+ @echo Run "dmake test" to test and "dmake install" to install
+
+.ELSE
+# dummy targets for Win95-specific makefile
+
+__done:
+ $(NOOP)
+
+__no_such_target:
+ $(NOOP)
+
+.ENDIF
+
+# This target is used to generate the new makefile (.\makefile.95) for Win95
+
+.\makefile.95: .\makefile.mk
+ $(MINIPERL) genmk95.pl makefile.mk $(MK2)
+
+#--------------------- END Win95 SPECIFIC ---------------------
+
+# a blank target for when builds don't need to do certain things
+# this target added for Win95 port but used to keep the WinNT port able to
+# use this file
+__not_needed:
+ $(NOOP)
+
+$(GLOBEXE) : perlglob$(o)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(CC) -c -w -v -tWM -I"$(CCINCDIR)" perlglob.c
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) c0x32$(o) perlglob$(o) \
+ "$(CCLIBDIR)\32BIT\wildargs$(o)",$@,,import32.lib cw32mt.lib,
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) $(BLINK_FLAGS) -mconsole -o $@ perlglob$(o) $(LIBFILES)
+.ELSE
+ $(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
+ perlglob$(o) setargv$(o)
+.ENDIF
+
+perlglob$(o) : perlglob.c
+
+config.w32 : $(CFGSH_TMPL)
+ copy $(CFGSH_TMPL) config.w32
+
+.\config.h : $(CFGH_TMPL) $(CORE_NOCFG_H)
+ -del /f config.h
+ copy $(CFGH_TMPL) config.h
+
+..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
+ $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
+ $(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
+
+# this target is for when changes to the main config.sh happen
+# edit config.{b,v,g}c and make this target once for each supported
+# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+regen_config_h:
+ perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
+ $(CFGSH_TMPL) > ..\config.sh
+ -cd .. && del /f perl.exe
+ -cd .. && del /f perl*.dll
+ cd .. && perl configpm
+ -del /f $(CFGH_TMPL)
+ -mkdir $(COREDIR)
+ -perl config_h.PL "INST_VER=$(INST_VER)"
+ rename config.h $(CFGH_TMPL)
+
+$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
+ cd .. && miniperl configpm
+ if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(XCOPY) *.h $(COREDIR)\*.*
+ $(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
+ $(RCOPY) include $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ || $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
+
+$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ \
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+.ENDIF
+
+$(MINIDIR) :
+ if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
+
+$(MINICORE_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
+
+$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
+ $(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
+
+# -DPERL_IMPLICIT_SYS needs C++ for perllib.c
+# rules wrapped in .IFs break Win9X build (we end up with unbalanced []s unless
+# unless the .IF is true), so instead we use a .ELSE with the default.
+# This is the only file that depends on perlhost.h, vmem.h, and vdir.h
+
+perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
+.IF "$(USE_IMP_SYS)" == "define"
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+.ELSE
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+.ENDIF
+
+# 1. we don't want to rebuild miniperl.exe when config.h changes
+# 2. we don't want to rebuild miniperl.exe with non-default config.h
+$(MINI_OBJ) : $(CORE_NOCFG_H)
+
+$(WIN32_OBJ) : $(CORE_H)
+$(CORE_OBJ) : $(CORE_H)
+$(DLL_OBJ) : $(CORE_H)
+$(X2P_OBJ) : $(CORE_H)
+
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
+ $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+ $(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
+
+$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpd -ap $(BLINK_FLAGS) \
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
+ $@,\n \
+ $(LIBFILES)\n \
+ perldll.def\n)
+ $(IMPLIB) $*.lib $@
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ dlltool --output-lib $(PERLIMPLIB) \
+ --dllname $(PERLDLL:b).dll \
+ --def perldll.def \
+ --base-file perl.base \
+ --output-exp perl.exp
+ $(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) $(LIBFILES) \
+ perl.exp $(LKPOST))
+.ELSE
+ $(LINK32) -dll -def:perldll.def -out:$@ \
+ @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
+ $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
+.ENDIF
+ $(XCOPY) $(PERLIMPLIB) $(COREDIR)
+
+$(MINIMOD) : $(MINIPERL) ..\minimod.pl
+ cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
+
+..\x2p\a2p$(o) : ..\x2p\a2p.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\a2p.c
+
+..\x2p\hash$(o) : ..\x2p\hash.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\hash.c
+
+..\x2p\str$(o) : ..\x2p\str.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\str.c
+
+..\x2p\util$(o) : ..\x2p\util.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\util.c
+
+..\x2p\walk$(o) : ..\x2p\walk.c
+ $(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
+
+$(X2P) : $(MINIPERL) $(X2P_OBJ)
+ $(MINIPERL) ..\x2p\find2perl.PL
+ $(MINIPERL) ..\x2p\s2p.PL
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -v -o $@ $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ \
+ @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+.ENDIF
+
+perlmain.c : runperl.c
+ copy runperl.c perlmain.c
+
+perlmain$(o) : perlmain.c
+ $(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+
+$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
+ $(@:s,\,\\),\n \
+ $(PERLIMPLIB) $(LIBFILES)\n)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
+ $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ $(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+.ENDIF
+ copy $(PERLEXE) $(WPERLEXE)
+ $(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+
+$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
+ if not exist $(AUTODIR) mkdir $(AUTODIR)
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
+ cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
+ $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
+ $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
+ cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
+ $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
+
+$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
+ copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+
+#----------------------------------------------------------------------------------
+Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR)
+
+Extensions_clean :
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
+
+#----------------------------------------------------------------------------------
+
+
+doc: $(PERLEXE)
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ --podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
+ --libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
+
+utils: $(PERLEXE) $(X2P)
+ cd ..\utils && $(MAKE) PERL=$(MINIPERL)
+ copy ..\README.aix ..\pod\perlaix.pod
+ copy ..\README.amiga ..\pod\perlamiga.pod
+ copy ..\README.apollo ..\pod\perlapollo.pod
+ copy ..\README.beos ..\pod\perlbeos.pod
+ copy ..\README.bs2000 ..\pod\perlbs2000.pod
+ copy ..\README.ce ..\pod\perlce.pod
+ copy ..\README.cygwin ..\pod\perlcygwin.pod
+ copy ..\README.dgux ..\pod\perldgux.pod
+ copy ..\README.dos ..\pod\perldos.pod
+ copy ..\README.epoc ..\pod\perlepoc.pod
+ copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.hpux ..\pod\perlhpux.pod
+ copy ..\README.hurd ..\pod\perlhurd.pod
+ copy ..\README.irix ..\pod\perlirix.pod
+ copy ..\README.machten ..\pod\perlmachten.pod
+ copy ..\README.macos ..\pod\perlmacos.pod
+ copy ..\README.macosx ..\pod\perlmacosx.pod
+ copy ..\README.mint ..\pod\perlmint.pod
+ copy ..\README.mpeix ..\pod\perlmpeix.pod
+ copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.os2 ..\pod\perlos2.pod
+ copy ..\README.os390 ..\pod\perlos390.pod
+ copy ..\README.os400 ..\pod\perlos400.pod
+ copy ..\README.plan9 ..\pod\perlplan9.pod
+ copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.tru64 ..\pod\perltru64.pod
+ copy ..\README.uts ..\pod\perluts.pod
+ copy ..\README.vmesa ..\pod\perlvmesa.pod
+ copy ..\vms\perlvms.pod ..\pod\perlvms.pod
+ copy ..\README.vos ..\pod\perlvos.pod
+ copy ..\README.win32 ..\pod\perlwin32.pod
+ cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
+ cd ..\lib && $(PERLEXE) lib_pm.PL
+ $(PERLEXE) $(PL2BAT) $(UTILS)
+
+distclean: clean
+ -del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
+ -del /f *.def *.map
+ -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
+ -del /f $(LIBDIR)\XSLoader.pm
+ -del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
+ -del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
+ -del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
+ -del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
+ -del /f $(LIBDIR)\Data\Dumper.pm $(LIBDIR)\ByteLoader.pm
+ -del /f $(LIBDIR)\PerlIO\scalar.pm
+ -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
+ -del /f $(LIBDIR)\File\Glob.pm
+ -del /f $(LIBDIR)\Storable.pm
+ -del /f $(LIBDIR)\Filter\Util\Call.pm
+ -del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\MIME\Base64.pm
+ -del /f $(LIBDIR)\MIME\QuotedPrint.pm
+ -del /f $(LIBDIR)\Time\HiRes.pm
+ -del /f $(LIBDIR)\List\Util.pm
+ -del /f $(LIBDIR)\Scalar\Util.pm
+ -del /f $(LIBDIR)\Unicode\Normalize.pm
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+ -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
+ -if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
+ -if exist $(LIBDIR)\Digest rmdir /s $(LIBDIR)\Digest
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
+ -if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
+ -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
+ -cd $(PODDIR) && del /f *.html *.bat checkpods \
+ perlaix.pod perlamiga.pod perlapollo.pod \
+ perlbeos.pod perlbs2000.pod perlce.pod perlcygwin.pod perldgux.pod \
+ perldos.pod perlepoc.pod perlfreebsd.pod perlhpux.pod perlhurd.pod \
+ perlirix.pod perlmachten.pod perlmint.pod \
+ perlmacos.pod perlmpeix.pod perlnetware.pod \
+ perlos2.pod perlos390.pod perlos400.pod \
+ perlplan9.pod perlqnx.pod \
+ perlsolaris.pod perltru64.pod perluts.pod \
+ perlvmesa.pod perlvms.pod perlvos.pod \
+ perlwin32.pod pod2html pod2latex pod2man pod2text pod2usage \
+ podchecker podselect
+ -cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
+ perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat
+ -cd ..\x2p && del /f find2perl s2p psed *.bat
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f $(CONFIGPM)
+ -del /f bin\*.bat
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
+ -if exist $(AUTODIR) rmdir /s $(AUTODIR)
+ -if exist $(COREDIR) rmdir /s /q $(COREDIR)
+ -if exist $(COREDIR) rmdir /s $(COREDIR)
+
+install : all installbare installhtml
+
+installbare : $(RIGHTMAKE) utils
+ $(PERLEXE) ..\installperl
+ if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+ $(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
+ $(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
+
+installhtml : doc
+ $(RCOPY) html\*.* $(INST_HTML)\*.*
+
+inst_lib : $(CONFIGPM)
+ copy splittree.pl ..
+ $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+ $(RCOPY) ..\lib $(INST_LIB)\*.*
+
+minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) utils
+ $(XCOPY) $(MINIPERL) ..\t\perl.exe
+.IF "$(CCTYPE)" == "BORLAND"
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+ attrib -r ..\t\*.*
+ copy test ..\t
+ cd ..\t && \
+ $(MINIPERL) -I..\lib test base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
+
+test-prep : all utils
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+
+test : $(RIGHTMAKE) test-prep
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
+test-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1 && \
+ cd ..\t && $(PERLEXE) -I.\lib harness
+
+test-wide : test-prep
+ set HARNESS_PERL_SWITCHES=-C && \
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
+test-wide-notty : test-prep
+ set PERL_SKIP_TTY_TEST=1 && \
+ set HARNESS_PERL_SWITCHES=-C && \
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
+_test : $(RIGHTMAKE)
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(XCOPY) $(GLOBBAT) ..\t\$(NULL)
+.ELSE
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+.ENDIF
+ cd ..\t && $(PERLEXE) -I..\lib harness
+
+clean : Extensions_clean
+ -@erase miniperlmain$(o)
+ -@erase $(MINIPERL)
+ -@erase perlglob$(o)
+ -@erase perlmain$(o)
+ -@erase config.w32
+ -@erase /f config.h
+ -@erase $(GLOBEXE)
+ -@erase $(PERLEXE)
+ -@erase $(WPERLEXE)
+ -@erase $(PERLDLL)
+ -@erase $(CORE_OBJ)
+ -if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
+ -if exist $(MINIDIR) rmdir /s $(MINIDIR)
+ -@erase $(WIN32_OBJ)
+ -@erase $(DLL_OBJ)
+ -@erase $(X2P_OBJ)
+ -@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
+ -@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
+ -@erase ..\x2p\*.exe ..\x2p\*.bat
+ -@erase *.ilk
+ -@erase *.pdb
+
+# Handy way to run perlbug -ok without having to install and run the
+# installed perlbug. We don't re-run the tests here - we trust the user.
+# Please *don't* use this unless all tests pass.
+# If you want to report test failures, use "dmake nok" instead.
+ok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)"
+
+okfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -ok -s "(UNINSTALLED)" -F perl.ok
+
+nok: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)"
+
+nokfile: utils
+ $(PERLEXE) -I..\lib ..\utils\perlbug -nok -s "(UNINSTALLED)" -F perl.nok
https://perl5.git.perl.org / perl5.git / blobdiff