pldlflags="$cccdlflags"
static_ldflags=''
case "${osname}${osvers}" in
- next4*)
- ld=libtool
- lddlflags="-dynamic -undefined warning -framework System \
- -compatibility_version 1 -current_version $patchlevel \
- -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
- ;;
darwin*)
shrpldflags="${ldflags} -dynamiclib \
-compatibility_version \
esac
;;
cygwin*)
- shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000"
+ shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a"
linklibperl="-L. -lperl"
;;
sunos*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
os390*)
- shrpldflags='-W l,XPLINK,dll'
- linklibperl='libperl.x'
- DPERL_EXTERNAL_GLOB=''
- ;;
+ case "$use64bitall" in
+ define|true|[yY]*) shrpldflags='-Wl,LP64,dll'
+ linklibperl='libperl.x'
+ ;;
+ *) shrpldflags='-Wl,XPLINK,dll'
+ linklibperl='libperl.x'
+ ;;
+ esac
+ ;;
esac
case "$ldlibpthname" in
'') ;;
;;
esac
+# ccdlflags, not to be confused with cccdlflags:
+case "${osname}" in
+aix)
+ # In AIX we need to change this for building Perl itself from
+ # the config.sh definition (which is for building external
+ # extensions *after* Perl has been built and installed)
+ ccdlflags=`echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
+ ;;
+esac
+
: is Cwd static or dynamic
static_cwd='define'
list_util_dep='$(PERL_EXE)'
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
-LLIBPERL_NONSHR= $linklibperl_nonshr
SHRPENV = $shrpenv
# Static targets are ordinarily built without CCCDLFLAGS. However,
EXE_EXT = $_exe
LIB_EXT = $_a
OBJ_EXT = $_o
-PATH_SEP = $p_
# Macros to invoke a copy of miniperl during the build. Targets which
# are built using these macros should depend on \$(MINIPERL_EXE)
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
-.SUFFIXES: .c \$(OBJ_EXT) .i .s
+.SUFFIXES: .c \$(OBJ_EXT) .i .s .c.depends
# grrr
SHELL = $sh
shextract = $shextract
!GROK!THIS!
+# Source files where we build a variant for miniperl:
+mini_special='op perl universal'
+for file in $mini_special; do
+ mini_special_c="$mini_special_c ${file}mini.c"
+ mini_only_objs="$mini_only_objs ${file}mini\$(OBJ_EXT)"
+ main_only_objs="$main_only_objs ${file}\$(OBJ_EXT)"
+ ctags_exclude="$ctags_exclude --exclude=${file}mini.c"
+done
+
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
# Directories of Unicode data files generated by mktables
unidatadirs = lib/unicore/To lib/unicore/lib
-h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h
-h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
-h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
-h6 = charclass_invlists.h
-h = $(h1) $(h2) $(h3) $(h4) $(h5) $(h6)
+h = \
+ EXTERN.h INTERN.h XSUB.h \
+ av.h charclass_invlists.h cop.h cv.h dosish.h embed.h form.h gv.h \
+ handy.h hv.h hv_func.h iperlsys.h keywords.h l1_char_class_tab.h \
+ mg.h mydtrace.h op.h op_reg_common.h opcode.h pad.h patchlevel.h \
+ perl.h perlapi.h perly.h pp.h proto.h regcomp.h regcomp_internal.h \
+ regexp.h scope.h sv.h thread.h unixish.h utf8.h util.h warnings.h \
+ $(CONFIGH)
+
+c_base = \
+ av.c builtin.c caretx.c class.c deb.c doio.c doop.c dquote.c dump.c \
+ globals.c gv.c hv.c keywords.c locale.c mathoms.c mg.c mro_core.c \
+ numeric.c op.c pad.c peep.c perl.c perlio.c perly.c \
+ pp.c pp_ctl.c pp_hot.c pp_pack.c pp_sort.c pp_sys.c \
+ reentr.c regcomp.c regcomp_debug.c regcomp_invlist.c regcomp_study.c \
+ regcomp_trie.c regexec.c run.c scope.c sv.c taint.c time64.c toke.c \
+ universal.c utf8.c util.c \
+ $(mallocsrc)
-c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c
-c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
-c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c dquote.c time64.c
-c5 = $(mallocsrc)
+!NO!SUBS!
-c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
+$spitshell >>$Makefile <<!GROK!THIS!
+mini_only_src =$mini_special_c
+mini_only_objs =$mini_only_objs
+main_only_objs =$main_only_objs
+!GROK!THIS!
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT) keywords$(OBJ_EXT)
-obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) caretx$(OBJ_EXT) dquote$(OBJ_EXT) time64$(OBJ_EXT)
+$spitshell >>$Makefile <<'!NO!SUBS!'
+
+c = $(c_base) miniperlmain.c $(mini_only_src)
# split the objects into 3 exclusive sets: those used by both miniperl and
# perl, and those used by just one or the other. Doesn't include the
# actual perl(mini)main.o, nor any dtrace objects.
-common_objs = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-mini_only_objs = opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
-main_only_objs = op$(OBJ_EXT) perl$(OBJ_EXT)
+common_objs = \
+ av$(OBJ_EXT) builtin$(OBJ_EXT) caretx$(OBJ_EXT) class$(OBJ_EXT) \
+ deb$(OBJ_EXT) doio$(OBJ_EXT) doop$(OBJ_EXT) dquote$(OBJ_EXT) \
+ dump$(OBJ_EXT) globals$(OBJ_EXT) gv$(OBJ_EXT) hv$(OBJ_EXT) \
+ keywords$(OBJ_EXT) locale$(OBJ_EXT) mathoms$(OBJ_EXT) mg$(OBJ_EXT) \
+ mro_core$(OBJ_EXT) numeric$(OBJ_EXT) pad$(OBJ_EXT) peep$(OBJ_EXT) \
+ perlio$(OBJ_EXT) perly$(OBJ_EXT) pp$(OBJ_EXT) pp_ctl$(OBJ_EXT) \
+ pp_hot$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) pp_sys$(OBJ_EXT) \
+ reentr$(OBJ_EXT) regcomp$(OBJ_EXT) regcomp_debug$(OBJ_EXT) \
+ regcomp_invlist$(OBJ_EXT) regcomp_study$(OBJ_EXT) regcomp_trie$(OBJ_EXT) \
+ regexec$(OBJ_EXT) run$(OBJ_EXT) scope$(OBJ_EXT) sv$(OBJ_EXT) \
+ taint$(OBJ_EXT) time64$(OBJ_EXT) toke$(OBJ_EXT) utf8$(OBJ_EXT) \
+ util$(OBJ_EXT) \
+ $(mallocobj) $(ARCHOBJS)
miniperl_objs_nodt = $(mini_only_objs) $(common_objs) miniperlmain$(OBJ_EXT)
perllib_objs_nodt = $(main_only_objs) $(common_objs)
$spitshell >>$Makefile <<'!NO!SUBS!'
-perltoc_pod_prereqs = extra.pods pod/perl5313delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5398delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
generated_headers = uudmap.h bitcount.h mg_data.h
@echo `$(CCCMD)` $(PLDLFLAGS) $*.c
@`$(CCCMD)` $(PLDLFLAGS) $*.c
-.c.i: perl.h config.h
+.c.i:
@echo `$(CCCMDSRC)` -E $*.c \> $*.i
@`$(CCCMDSRC)` -E $*.c > $*.i
-.c.s: perl.h config.h
+.c.s:
@echo `$(CCCMDSRC)` -S $*.c
@`$(CCCMDSRC)` -S $*.c
@sh -c true
!NO!SUBS!
-for file in op perl; do
+for file in $mini_special; do
if $issymlink $file.c; then
$spitshell >>$Makefile <<!GROK!THIS!
$spitshell >>$Makefile <<'!NO!SUBS!'
+cygwin.c: cygwin/cygwin.c
+ $(LNS) cygwin/cygwin.c
+
globals$(OBJ_EXT): $(generated_headers)
uudmap.h mg_data.h: bitcount.h
case "$osname" in
aix)
- $spitshell >>$Makefile <<!GROK!THIS!
-LIBS = $perllibs
-# In AIX we need to change this for building Perl itself from
-# its earlier definition (which is for building external
-# extensions *after* Perl has been built and installed)
-CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
-
-!GROK!THIS!
case "$useshrplib" in
define|true|[yY]*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
-MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
-
-$(LIBPERL_NONSHR): $(perllib_objs)
- $(RMS) $(LIBPERL_NONSHR)
- $(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
-
-$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
- $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
- opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
-
-MINIPERLEXP = $(MINIPERL_NONSHR)
-
LIBPERLEXPORT = perl.exp
!NO!SUBS!
;;
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-MINIPERLEXP = $(MINIPERL_EXE)
PERLEXPORT = perl.exp
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
-perl.exp: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH)
+perl.exp: $(MINIPERL_EXE) makedef.pl $(CONFIGPM) $(SYM) $(SYMH)
$(MINIPERL) makedef.pl --sort-fold PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" > perl.exp
!NO!SUBS!
!NO!SUBS!
;;
-cygwin)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-cygwin.c: cygwin/cygwin.c
- $(LNS) cygwin/cygwin.c
-
-LIBPERL_NONSHR = libperl$(LIB_EXT)
-
-$(LIBPERL_NONSHR): $(perllib_objs)
- $(RMS) $(LIBPERL_NONSHR)
- $(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
-
-!NO!SUBS!
- ;;
esac
if test -s $Makefile_s ; then
# b) have the rest of the Makefile depend on the more obvious $(MINIPERL_EXE)
$(MINIPERL_EXE): lib/buildcustomize.pl
+ @touch $(MINIPERL_EXE)
!NO!SUBS!
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
;;
- aix*)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-lib/buildcustomize.pl: $& $(miniperl_objs)
- $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(miniperl_objs) $(libs)
- $(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
- $(MINIPERL) -f write_buildcustomize.pl
-!NO!SUBS!
- ;;
- next4*)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-lib/buildcustomize.pl: $& $(miniperl_objs) write ldcustomize.pl
- $(CC) -o $(MINIPERL_EXE) $(miniperl_objs libs)
- $(LDLIBPTH) ./miniperl$(HOST _EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
- $(MINIPERL) -f write_buildcustomize.pl
-!NO!SUBS!
- ;;
darwin*)
case "$osvers" in
[1-6].*) ;;
-@rm -f miniperl.xok
!NO!SUBS!
- case $osname in
+ case "$osname" in
# In AmigaOS the Perl executable needs to be linked with -ldl,
# but none of the other executables should be.
amigaos) $spitshell >>$Makefile <<'!NO!SUBS!'
$spitshell >>$Makefile <<'!NO!SUBS!'
-# Microperl. This is just a convenience thing if one happens to
-# build also the full Perl and therefore the real big Makefile:
-# usually one should manually explicitly issue the below command.
-
-.PHONY: microperl
-microperl:
- $(MAKE) -f Makefile.micro
-
!NO!SUBS!
fi
unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
- $(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
+ $(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makenormtest -makelist -p
# Commented out so always runs, mktables looks at far more files than we
# can in this makefile to decide if needs to run or not
# touch uni.data
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) pod/perlmodlib.PL -q
-pod/perl5313delta.pod: pod/perldelta.pod
- $(RMS) pod/perl5313delta.pod
- $(LNS) perldelta.pod pod/perl5313delta.pod
+pod/perl5398delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5398delta.pod
+ $(LNS) perldelta.pod pod/perl5398delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
CHMOD_W = chmod +w
# The following files are generated automatically
-# embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c
+# embed.pl: proto.h embed.h embedvar.h
# opcode.pl: opcode.h opnames.h pp_proto.h
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
regen: FORCE
-perl regen.pl
- -perl regen/uconfig_h.pl
regen_headers regen-headers: FORCE
-perl regen.pl -v
- -perl regen/uconfig_h.pl -v
regen_meta regen-meta: META.yml META.json
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c generate_uudmap$(EXE_EXT) $(generated_headers)
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c $(mini_only_src) generate_uudmap$(EXE_EXT) $(generated_headers)
-rmdir .depending
+ -rm *.depends makedepend_file
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o pod/roffitall
+ -rm -f perl.exp ext.libs $(generated_pods) uni.data $(mini_only_objs) pod/roffitall
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
- -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
+ -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.*
-rm -f config.arch config.over $(DTRACE_H)
_cleaner1:
-rm -f `grep -v ^# mkppport.lst | grep . | sed -e 's/$$/\/ppport.h/'`
# Dear POSIX, thanks for making the default to xargs to be
-# run once if nothhing is passed in. It is such a great help.
+# run once if nothing is passed in. It is such a great help.
# Some systems do not support "?", so keep these files separate.
rm -rf pod/perlfunc pod/perlipc
-rmdir ext/B/lib
-rm -f dist/Time-HiRes/xdefine
- rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ rm -f so_locations $(LIBPERL_NONSHR)
-rmdir lib/version lib/threads lib/inc/ExtUtils lib/inc lib/encoding
-rmdir lib/autodie/exception lib/autodie/Scope lib/autodie lib/XS
-rmdir lib/Win32API lib/VMS lib/Unicode/Collate/Locale
-rmdir lib/Unicode/Collate/CJK lib/Unicode/Collate lib/Tie/Hash
- -rmdir lib/Thread lib/Text lib/Test2/Util lib/Test2/Tools
- -rmdir lib/Test2/IPC/Driver lib/Test2/IPC lib/Test2/Hub/Interceptor
- -rmdir lib/Test2/Hub lib/Test2/Formatter lib/Test2/EventFacet/Info
- -rmdir lib/Test2/EventFacet lib/Test2/Event/TAP lib/Test2/Event
+ -rmdir lib/Thread lib/Text lib/Test2/Workflow/Task lib/Test2/Workflow
+ -rmdir lib/Test2/Util/Table lib/Test2/Util lib/Test2/Tools
+ -rmdir lib/Test2/Require lib/Test2/Plugin
+ -rmdir lib/Test2/Manual/Tooling/Plugin lib/Test2/Manual/Tooling
+ -rmdir lib/Test2/Manual/Testing lib/Test2/Manual/Anatomy
+ -rmdir lib/Test2/Manual lib/Test2/IPC/Driver lib/Test2/IPC
+ -rmdir lib/Test2/Hub/Interceptor lib/Test2/Hub lib/Test2/Formatter
+ -rmdir lib/Test2/EventFacet/Info lib/Test2/EventFacet
+ -rmdir lib/Test2/Event/TAP lib/Test2/Event lib/Test2/Compare
+ -rmdir lib/Test2/Bundle lib/Test2/AsyncSubtest/Event
+ -rmdir lib/Test2/AsyncSubtest lib/Test2/API/InterceptResult
-rmdir lib/Test2/API lib/Test2 lib/Test/use lib/Test/Tester
-rmdir lib/Test/Builder/Tester lib/Test/Builder/IO lib/Test/Builder
- -rmdir lib/Test lib/Term lib/TAP/Parser/YAMLish
+ -rmdir lib/Test lib/Term/Table lib/Term lib/TAP/Parser/YAMLish
-rmdir lib/TAP/Parser/SourceHandler lib/TAP/Parser/Scheduler
-rmdir lib/TAP/Parser/Result lib/TAP/Parser/Iterator lib/TAP/Parser
-rmdir lib/TAP/Harness lib/TAP/Formatter/File
-rmdir lib/TAP/Formatter/Console lib/TAP/Formatter lib/TAP
-rmdir lib/Sys/Syslog lib/Sys lib/Sub lib/Search lib/Scalar
- -rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/PerlIO/via
- -rmdir lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse lib/Params
- -rmdir lib/Net/FTP lib/Module/Load lib/Module/CoreList lib/Module
- -rmdir lib/Memoize lib/Math/BigInt lib/Math/BigFloat lib/Math lib/MIME
- -rmdir lib/Locale/Maketext lib/Locale lib/List/Util lib/List
- -rmdir lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
- -rmdir lib/IO/Uncompress lib/IO/Socket lib/IO/Compress/Zlib
- -rmdir lib/IO/Compress/Zip lib/IO/Compress/Gzip lib/IO/Compress/Base
- -rmdir lib/IO/Compress/Adapter lib/IO/Compress lib/IO
- -rmdir lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash lib/HTTP
- -rmdir lib/Filter/Util lib/Filter lib/File/Spec lib/ExtUtils/Typemaps
- -rmdir lib/ExtUtils/ParseXS lib/ExtUtils/MakeMaker/version
- -rmdir lib/ExtUtils/MakeMaker lib/ExtUtils/Liblist
- -rmdir lib/ExtUtils/Constant lib/ExtUtils/Command
+ -rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/Pod/Html
+ -rmdir lib/PerlIO/via lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse
+ -rmdir lib/Params lib/Net/FTP lib/Module/Load lib/Module/CoreList
+ -rmdir lib/Module lib/Memoize lib/Math/BigRat lib/Math/BigInt
+ -rmdir lib/Math/BigFloat lib/Math lib/MIME lib/Locale/Maketext
+ -rmdir lib/Locale lib/List/Util lib/List lib/JSON/PP lib/JSON lib/IPC
+ -rmdir lib/IO/Uncompress/Adapter lib/IO/Uncompress lib/IO/Socket
+ -rmdir lib/IO/Compress/Zlib lib/IO/Compress/Zip lib/IO/Compress/Gzip
+ -rmdir lib/IO/Compress/Base lib/IO/Compress/Adapter lib/IO/Compress
+ -rmdir lib/IO lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash
+ -rmdir lib/HTTP lib/Getopt/Long lib/Filter/Util lib/Filter
+ -rmdir lib/File/Spec lib/ExtUtils/Typemaps lib/ExtUtils/ParseXS
+ -rmdir lib/ExtUtils/MakeMaker/version lib/ExtUtils/MakeMaker
+ -rmdir lib/ExtUtils/Liblist lib/ExtUtils/Constant lib/ExtUtils/Command
-rmdir lib/ExtUtils/CBuilder/Platform/Windows
-rmdir lib/ExtUtils/CBuilder/Platform lib/ExtUtils/CBuilder
-rmdir lib/Exporter lib/Encode/Unicode lib/Encode/MIME/Header
-rmdir lib/Encode/MIME lib/Encode/KR lib/Encode/JP lib/Encode/CN
-rmdir lib/Encode lib/Digest lib/Devel lib/Data lib/Config/Perl
-rmdir lib/Compress/Raw lib/Compress lib/Carp lib/CPAN/Plugin
- -rmdir lib/CPAN/Meta/History lib/CPAN/Meta lib/CPAN/LWP
- -rmdir lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP lib/CPAN/Exception
- -rmdir lib/CPAN/API lib/CPAN lib/Attribute lib/Archive/Tar lib/Archive
- -rmdir lib/App/Prove/State/Result lib/App/Prove/State lib/App/Prove
- -rmdir lib/App lib/Amiga
+ -rmdir lib/CPAN/Meta/Requirements lib/CPAN/Meta/History lib/CPAN/Meta
+ -rmdir lib/CPAN/LWP lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP
+ -rmdir lib/CPAN/Exception lib/CPAN/API lib/CPAN lib/Attribute
+ -rmdir lib/Archive/Tar lib/Archive lib/App/Prove/State/Result
+ -rmdir lib/App/Prove/State lib/App/Prove lib/App lib/Amiga
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
# The README below ensures that the dependency list is never empty and
# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
-MAKEDEPEND = Makefile makedepend
+MAKEDEPEND = Makefile makedepend_file makedepend
$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
depend: makedepend $(DTRACE_H) $(generated_headers)
sh ./makedepend MAKE="$(MAKE)" cflags
+.c.c.depends:
+ sh ./makedepend_file $< $@ cflags
+
.PHONY: test check test_prep test_prep_nodll test_prep_pre \
test_prep_reonly test_tty test-tty test_notty test-notty \
test_harness test_harness_notty minitest test-reonly _test
# minitest can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest_prep:
+minitest_prep: $(MINIPERL_EXE)
-@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm, or the Unicode data files."
@echo " "
- - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE))
+ cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE))
MINITEST_TESTS = base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t
-minitest: $(MINIPERL_EXE) minitest_prep
- - cd t && $(RUN_PERL) TEST $(MINITEST_TESTS) <$(devtty)
+minitest: minitest_prep
+ cd t && $(RUN_PERL) TEST $(MINITEST_TESTS) <$(devtty)
-minitest-notty minitest_notty: $(MINIPERL_EXE) minitest_prep
- - cd t && PERL_SKIP_TTY_TEST=1 $(RUN_PERL) TEST $(MINITEST_TESTS)
+minitest-notty minitest_notty: minitest_prep
+ cd t && PERL_SKIP_TTY_TEST=1 $(RUN_PERL) TEST $(MINITEST_TESTS)
# Test via harness
HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
test_reonly test-reonly: test_prep_reonly
- TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
+ TEST_ARGS='re/*.t ../ext/re/t/*.t' PERL_TEST_HARNESS_ASAP=1 TESTFILE=harness $(RUN_TESTS) choose
# Porting tests (well-formedness of pod, manifest, etc)
test_porting test-porting: test_prep
- cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
+ TEST_ARGS='porting/*.t lib/diagnostics.t' TESTFILE=harness $(RUN_TESTS) choose
!NO!SUBS!
.PHONY: ctags
-TAGS: $(c1) $(c2) $(c3) $(c4) $(c5) $(h)
- etags $(c1) $(c2) $(c3) $(c4) $(c5) $(h)
+TAGS: $(c_base) $(h)
+ etags $(c_base) $(h)
+!NO!SUBS!
+
+$spitshell >>$Makefile <<!GROK!THIS!
ctags:
- ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
+ ctags -f Tags -N --totals --languages=c --langmap=c:+.h $ctags_exclude *.c *.h
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
-!NO!SUBS!
+!GROK!THIS!
$eunicefix Makefile
$rm -f $firstmakefile
https://perl5.git.perl.org / perl5.git / blobdiff