= "Can't match, because target string needs to be in UTF-8\n";
#endif
+/* Returns a boolean as to whether the input unsigned number is a power of 2
+ * (2**0, 2**1, etc). In other words if it has just a single bit set.
+ * If not, subtracting 1 would leave the uppermost bit set, so the & would
+ * yield non-zero */
+#define isPOWER_OF_2(n) ((n & (n-1)) == 0)
+
#define NON_UTF8_TARGET_BUT_UTF8_REQUIRED(target) STMT_START { \
DEBUG_EXECUTE_r(Perl_re_printf( aTHX_ "%s", non_utf8_target_but_utf8_required));\
goto target; \
*/
#define CHR_SVLEN(sv) (utf8_target ? sv_len_utf8(sv) : SvCUR(sv))
-#define CHR_DIST(a,b) (reginfo->is_utf8_target ? utf8_distance(a,b) : a - b)
#define HOPc(pos,off) \
(char *)(reginfo->is_utf8_target \
(U8*)(off >= 0 ? reginfo->strend : reginfo->strbeg)) \
: (U8*)(pos + off))
-#define HOPBACKc(pos, off) \
- (char*)(reginfo->is_utf8_target \
- ? reghopmaybe3((U8*)pos, (SSize_t)0-off, (U8*)(reginfo->strbeg)) \
- : (pos - off >= reginfo->strbeg) \
- ? (U8*)pos - off \
+/* like HOPMAYBE3 but backwards. lim must be +ve. Returns NULL on overshoot */
+#define HOPBACK3(pos, off, lim) \
+ (reginfo->is_utf8_target \
+ ? reghopmaybe3((U8*)pos, (SSize_t)0-off, (U8*)(lim)) \
+ : (pos - off >= lim) \
+ ? (U8*)pos - off \
: NULL)
+#define HOPBACKc(pos, off) ((char*)HOPBACK3(pos, off, reginfo->strbeg))
+
#define HOP3(pos,off,lim) (reginfo->is_utf8_target ? reghop3((U8*)(pos), off, (U8*)(lim)) : (U8*)(pos + off))
#define HOP3c(pos,off,lim) ((char*)HOP3(pos,off,lim))
#define HOP3lim(pos,off,lim) (reginfo->is_utf8_target \
? reghop3((U8*)(pos), off, (U8*)(lim)) \
: (U8*)((pos + off) > lim ? lim : (pos + off)))
+#define HOP3clim(pos,off,lim) ((char*)HOP3lim(pos,off,lim))
#define HOP4(pos,off,llim, rlim) (reginfo->is_utf8_target \
? reghop4((U8*)(pos), off, (U8*)(llim), (U8*)(rlim)) \
#define regcpblow(cp) LEAVE_SCOPE(cp) /* Ignores regcppush()ed data. */
-STATIC bool
-S_isFOO_lc(pTHX_ const U8 classnum, const U8 character)
+#ifndef PERL_IN_XSUB_RE
+
+bool
+Perl_isFOO_lc(pTHX_ const U8 classnum, const U8 character)
{
/* Returns a boolean as to whether or not 'character' is a member of the
* Posix character class given by 'classnum' that should be equivalent to a
return FALSE;
}
+#endif
+
STATIC bool
S_isFOO_utf8_lc(pTHX_ const U8 classnum, const U8* character)
{
return FALSE; /* Things like CNTRL are always below 256 */
}
+STATIC char *
+S_find_next_ascii(char * s, const char * send, const bool utf8_target)
+{
+ /* Returns the position of the first ASCII byte in the sequence between 's'
+ * and 'send-1' inclusive; returns 'send' if none found */
+
+ PERL_ARGS_ASSERT_FIND_NEXT_ASCII;
+
+#ifndef EBCDIC
+
+ if ((STRLEN) (send - s) >= PERL_WORDSIZE
+
+ /* This term is wordsize if subword; 0 if not */
+ + PERL_WORDSIZE * PERL_IS_SUBWORD_ADDR(s)
+
+ /* 'offset' */
+ - (PTR2nat(s) & PERL_WORD_BOUNDARY_MASK))
+ {
+
+ /* Process per-byte until reach word boundary. XXX This loop could be
+ * eliminated if we knew that this platform had fast unaligned reads */
+ while (PTR2nat(s) & PERL_WORD_BOUNDARY_MASK) {
+ if (isASCII(*s)) {
+ return s;
+ }
+ s++; /* khw didn't bother creating a separate loop for
+ utf8_target */
+ }
+
+ /* Here, we know we have at least one full word to process. Process
+ * per-word as long as we have at least a full word left */
+ do {
+ if ((* (PERL_UINTMAX_T *) s) & ~ PERL_VARIANTS_WORD_MASK) {
+ break;
+ }
+ s += PERL_WORDSIZE;
+ } while (s + PERL_WORDSIZE <= send);
+ }
+
+#endif
+
+ /* Process per-character */
+ if (utf8_target) {
+ while (s < send) {
+ if (isASCII(*s)) {
+ return s;
+ }
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (s < send) {
+ if (isASCII(*s)) {
+ return s;
+ }
+ s++;
+ }
+ }
+
+ return s;
+}
+
+STATIC char *
+S_find_next_non_ascii(char * s, const char * send, const bool utf8_target)
+{
+ /* Returns the position of the first non-ASCII byte in the sequence between
+ * 's' and 'send-1' inclusive; returns 'send' if none found */
+
+#ifdef EBCDIC
+
+ PERL_ARGS_ASSERT_FIND_NEXT_NON_ASCII;
+
+ if (utf8_target) {
+ while (s < send) {
+ if ( ! isASCII(*s)) {
+ return s;
+ }
+ s += UTF8SKIP(s);
+ }
+ }
+ else {
+ while (s < send) {
+ if ( ! isASCII(*s)) {
+ return s;
+ }
+ s++;
+ }
+ }
+
+ return s;
+
+#else
+
+ const U8 * next_non_ascii = NULL;
+
+ PERL_ARGS_ASSERT_FIND_NEXT_NON_ASCII;
+ PERL_UNUSED_ARG(utf8_target);
+
+ /* On ASCII platforms invariants and ASCII are identical, so if the string
+ * is entirely invariants, there is no non-ASCII character */
+ return (is_utf8_invariant_string_loc((U8 *) s,
+ (STRLEN) (send - s),
+ &next_non_ascii))
+ ? (char *) send
+ : (char *) next_non_ascii;
+
+#endif
+
+}
+
/*
* pregexec and friends
*/
goto fail;
}
- RX_MATCH_UTF8_set(rx,utf8_target);
+ RXp_MATCH_UTF8_set(prog, utf8_target);
reginfo->is_utf8_target = cBOOL(utf8_target);
reginfo->info_aux = NULL;
reginfo->strbeg = strbeg;
#ifdef DEBUGGING /* 7/99: reports of failure (with the older version) */
if (end_shift < 0)
Perl_croak(aTHX_ "panic: end_shift: %" IVdf " pattern:\n%s\n ",
- (IV)end_shift, RX_PRECOMP(prog));
+ (IV)end_shift, RX_PRECOMP(rx));
#endif
restart:
(IV)prog->check_end_shift);
});
- end_point = HOP3(strend, -end_shift, strbeg);
+ end_point = HOPBACK3(strend, end_shift, rx_origin);
+ if (!end_point)
+ goto fail_finish;
start_point = HOPMAYBE3(rx_origin, start_shift, end_point);
if (!start_point)
goto fail_finish;
&& prog->intflags & PREGf_ANCH
&& prog->check_offset_max != SSize_t_MAX)
{
- SSize_t len = SvCUR(check) - !!SvTAIL(check);
+ SSize_t check_len = SvCUR(check) - !!SvTAIL(check);
const char * const anchor =
(prog->intflags & PREGf_ANCH_GPOS ? strpos : strbeg);
+ SSize_t targ_len = (char*)end_point - anchor;
+
+ if (check_len > targ_len) {
+ DEBUG_EXECUTE_r(Perl_re_printf( aTHX_
+ "Anchored string too short...\n"));
+ goto fail_finish;
+ }
/* do a bytes rather than chars comparison. It's conservative;
* so it skips doing the HOP if the result can't possibly end
* up earlier than the old value of end_point.
*/
- if ((char*)end_point - anchor > prog->check_offset_max) {
+ assert(anchor + check_len <= (char *)end_point);
+ if (prog->check_offset_max + check_len < targ_len) {
end_point = HOP3lim((U8*)anchor,
prog->check_offset_max,
- end_point -len)
- + len;
+ end_point - check_len
+ )
+ + check_len;
}
}
*/
if (prog->anchored_substr || prog->anchored_utf8 || ml_anch)
- endpos= HOP3c(rx_origin, (prog->minlen ? cl_l : 0), strend);
+ endpos = HOP3clim(rx_origin, (prog->minlen ? cl_l : 0), strend);
else if (prog->float_substr || prog->float_utf8) {
rx_max_float = HOP3c(check_at, -start_shift, strbeg);
- endpos= HOP3c(rx_max_float, cl_l, strend);
+ endpos = HOP3clim(rx_max_float, cl_l, strend);
}
else
endpos= strend;
uscan += len; \
len=0; \
} else { \
- uvc = _to_utf8_fold_flags( (const U8*) uc, foldbuf, &foldlen, flags); \
len = UTF8SKIP(uc); \
+ uvc = _toFOLD_utf8_flags( (const U8*) uc, uc + len, foldbuf, &foldlen, \
+ flags); \
skiplen = UVCHR_SKIP( uvc ); \
foldlen -= skiplen; \
uscan = foldbuf + skiplen; \
tmp = TEST_UV(tmp); \
LOAD_UTF8_CHARCLASS_ALNUM(); \
REXEC_FBC_UTF8_SCAN( /* advances s while s < strend */ \
- if (tmp == ! (TEST_UTF8((U8 *) s))) { \
+ if (tmp == ! (TEST_UTF8((U8 *) s, (U8 *) reginfo->strend))) { \
tmp = !tmp; \
IF_SUCCESS; \
} \
REXEC_FBC_UTF8_CLASS_SCAN(
reginclass(prog, c, (U8*)s, (U8*) strend, utf8_target));
}
+ else if (ANYOF_FLAGS(c)) {
+ REXEC_FBC_CLASS_SCAN(reginclass(prog,c, (U8*)s, (U8*)s+1, 0));
+ }
else {
- REXEC_FBC_CLASS_SCAN(REGINCLASS(prog, c, (U8*)s, 0));
+ REXEC_FBC_CLASS_SCAN(ANYOF_BITMAP_TEST(c, *((U8*)s)));
}
break;
* trying that it will fail; so don't start a match past the
* required minimum number from the far end */
e = HOP3c(strend, -((SSize_t)ln), s);
-
- if (reginfo->intuit && e < s) {
- e = s; /* Due to minlen logic of intuit() */
- }
+ if (e < s)
+ break;
c1 = *pat_string;
c2 = fold_array[c1];
*/
e = HOP3c(strend, -((SSize_t)lnc), s);
- if (reginfo->intuit && e < s) {
- e = s; /* Due to minlen logic of intuit() */
- }
-
/* XXX Note that we could recalculate e to stop the loop earlier,
* as the worst case expansion above will rarely be met, and as we
* go along we would usually find that e moves further to the left.
goto do_boundu;
}
- FBC_BOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
+ FBC_BOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8_safe);
break;
case NBOUNDL:
goto do_nboundu;
}
- FBC_NBOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8);
+ FBC_NBOUND(isWORDCHAR_LC, isWORDCHAR_LC_uvchr, isWORDCHAR_LC_utf8_safe);
break;
case BOUND: /* regcomp.c makes sure that this only has the traditional \b
meaning */
assert(FLAGS(c) == TRADITIONAL_BOUND);
- FBC_BOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
+ FBC_BOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8_safe);
break;
case BOUNDA: /* regcomp.c makes sure that this only has the traditional \b
meaning */
assert(FLAGS(c) == TRADITIONAL_BOUND);
- FBC_NBOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8);
+ FBC_NBOUND(isWORDCHAR, isWORDCHAR_uni, isWORDCHAR_utf8_safe);
break;
case NBOUNDA: /* regcomp.c makes sure that this only has the traditional \b
case NBOUNDU:
if ((bound_type) FLAGS(c) == TRADITIONAL_BOUND) {
- FBC_NBOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
+ FBC_NBOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8_safe);
break;
}
do_boundu:
switch((bound_type) FLAGS(c)) {
case TRADITIONAL_BOUND:
- FBC_BOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8);
+ FBC_BOUND(isWORDCHAR_L1, isWORDCHAR_uni, isWORDCHAR_utf8_safe);
break;
case GCB_BOUND:
if (s == reginfo->strbeg) {
);
break;
+ case ASCII:
+ s = find_next_ascii(s, strend, utf8_target);
+ if (s < strend && (reginfo->intuit || regtry(reginfo, &s))) {
+ goto got_it;
+ }
+
+ break;
+
+ case NASCII:
+ s = find_next_non_ascii(s, strend, utf8_target);
+ if (s < strend && (reginfo->intuit || regtry(reginfo, &s))) {
+ goto got_it;
+ }
+
+ break;
+
/* The argument to all the POSIX node types is the class number to pass to
* _generic_isCC() to build a mask for searching in PL_charclass[] */
if (utf8_target) {
/* The complement of something that matches only ASCII matches all
* non-ASCII, plus everything in ASCII that isn't in the class. */
- REXEC_FBC_UTF8_CLASS_SCAN(! isASCII_utf8(s)
+ REXEC_FBC_UTF8_CLASS_SCAN( ! isASCII_utf8_safe(s, strend)
|| ! _generic_isCC_A(*s, FLAGS(c)));
break;
}
to_complement = 1;
- /* FALLTHROUGH */
+ goto posixa;
case POSIXA:
- posixa:
/* Don't need to worry about utf8, as it can match only a single
- * byte invariant character. */
+ * byte invariant character. But we do anyway for performance reasons,
+ * as otherwise we would have to examine all the continuation
+ * characters */
+ if (utf8_target) {
+ REXEC_FBC_UTF8_CLASS_SCAN(_generic_isCC_A(*s, FLAGS(c)));
+ break;
+ }
+
+ posixa:
REXEC_FBC_CLASS_SCAN(
to_complement ^ cBOOL(_generic_isCC_A(*s, FLAGS(c))));
break;
if ((UTF8_IS_INVARIANT(*s)
&& to_complement ^ cBOOL(_generic_isCC((U8) *s,
classnum)))
- || (UTF8_IS_DOWNGRADEABLE_START(*s)
+ || ( UTF8_IS_NEXT_CHAR_DOWNGRADEABLE(s, strend)
&& to_complement ^ cBOOL(
_generic_isCC(EIGHT_BIT_UTF8_TO_NATIVE(*s,
*(s + 1)),
macros */
case _CC_ENUM_SPACE:
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(isSPACE_utf8(s)));
+ to_complement ^ cBOOL(isSPACE_utf8_safe(s, strend)));
break;
case _CC_ENUM_BLANK:
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(isBLANK_utf8(s)));
+ to_complement ^ cBOOL(isBLANK_utf8_safe(s, strend)));
break;
case _CC_ENUM_XDIGIT:
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(isXDIGIT_utf8(s)));
+ to_complement ^ cBOOL(isXDIGIT_utf8_safe(s, strend)));
break;
case _CC_ENUM_VERTSPACE:
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(isVERTWS_utf8(s)));
+ to_complement ^ cBOOL(isVERTWS_utf8_safe(s, strend)));
break;
case _CC_ENUM_CNTRL:
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(isCNTRL_utf8(s)));
+ to_complement ^ cBOOL(isCNTRL_utf8_safe(s, strend)));
break;
default:
* FBC macro instead of being expanded out. Since we've loaded the
* swash, we don't have to check for that each time through the loop */
REXEC_FBC_UTF8_CLASS_SCAN(
- to_complement ^ cBOOL(_generic_utf8(
+ to_complement ^ cBOOL(_generic_utf8_safe(
classnum,
s,
+ strend,
swash_fetch(PL_utf8_swash_ptrs[classnum],
(U8 *) s, TRUE))));
break;
}
else {
/* create new COW SV to share string */
- RX_MATCH_COPY_FREE(rx);
+ RXp_MATCH_COPY_FREE(prog);
prog->saved_copy = sv_setsv_cow(prog->saved_copy, sv);
}
prog->subbeg = (char *)SvPVX_const(prog->saved_copy);
assert(min >= 0 && min <= max && min <= strend - strbeg);
sublen = max - min;
- if (RX_MATCH_COPIED(rx)) {
+ if (RXp_MATCH_COPIED(prog)) {
if (sublen > prog->sublen)
prog->subbeg =
(char*)saferealloc(prog->subbeg, sublen+1);
prog->subbeg[sublen] = '\0';
prog->suboffset = min;
prog->sublen = sublen;
- RX_MATCH_COPIED_on(rx);
+ RXp_MATCH_COPIED_on(prog);
}
prog->subcoffset = prog->suboffset;
if (prog->suboffset && utf8_target) {
}
}
else {
- RX_MATCH_COPY_FREE(rx);
+ RXp_MATCH_COPY_FREE(prog);
prog->subbeg = strbeg;
prog->suboffset = 0;
prog->subcoffset = 0;
/* match via INTUIT shouldn't have any captures.
* Let @-, @+, $^N know */
prog->lastparen = prog->lastcloseparen = 0;
- RX_MATCH_UTF8_set(rx, utf8_target);
+ RXp_MATCH_UTF8_set(prog, utf8_target);
prog->offs[0].start = s - strbeg;
prog->offs[0].end = utf8_target
? (char*)utf8_hop((U8*)s, prog->minlenret) - strbeg
Perl_croak(aTHX_ "corrupted regexp program");
}
- RX_MATCH_TAINTED_off(rx);
- RX_MATCH_UTF8_set(rx, utf8_target);
+ RXp_MATCH_TAINTED_off(prog);
+ RXp_MATCH_UTF8_set(prog, utf8_target);
reginfo->prog = rx; /* Yes, sorry that this is confusing. */
reginfo->intuit = 0;
regprop(prog, prop, c, reginfo, NULL);
{
RE_PV_QUOTED_DECL(quoted,utf8_target,PERL_DEBUG_PAD_ZERO(1),
- s,strend-s,60);
+ s,strend-s,PL_dump_re_max_len);
Perl_re_printf( aTHX_
"Matching stclass %.*s against %s (%d bytes)\n",
(int)SvCUR(prop), SvPVX_const(prop),
reginitcolors();
{
RE_PV_QUOTED_DECL(s0, utf8_pat, PERL_DEBUG_PAD_ZERO(0),
- RX_PRECOMP_const(prog), RX_PRELEN(prog), 60);
+ RX_PRECOMP_const(prog), RX_PRELEN(prog), PL_dump_re_max_len);
RE_PV_QUOTED_DECL(s1, utf8_target, PERL_DEBUG_PAD_ZERO(1),
- start, end - start, 60);
+ start, end - start, PL_dump_re_max_len);
Perl_re_printf( aTHX_
"%s%s REx%s %s against %s\n",
const int is_uni = utf8_target ? 1 : 0;
RE_PV_COLOR_DECL(s0,len0,is_uni,PERL_DEBUG_PAD(0),
- (locinput - pref_len),pref0_len, 60, 4, 5);
+ (locinput - pref_len),pref0_len, PL_dump_re_max_len, 4, 5);
RE_PV_COLOR_DECL(s1,len1,is_uni,PERL_DEBUG_PAD(1),
(locinput - pref_len + pref0_len),
- pref_len - pref0_len, 60, 2, 3);
+ pref_len - pref0_len, PL_dump_re_max_len, 2, 3);
RE_PV_COLOR_DECL(s2,len2,is_uni,PERL_DEBUG_PAD(2),
locinput, loc_regeol - locinput, 10, 0, 1);
}
else {
STRLEN len;
- _to_utf8_fold_flags(s,
- d,
- &len,
- FOLD_FLAGS_FULL | FOLD_FLAGS_LOCALE);
+ _toFOLD_utf8_flags(s,
+ pat_end,
+ d,
+ &len,
+ FOLD_FLAGS_FULL | FOLD_FLAGS_LOCALE);
d += len;
s += UTF8SKIP(s);
}
}
else { /* Does participate in folds */
AV* list = (AV*) *listp;
- if (av_tindex_nomg(list) != 1) {
+ if (av_tindex_skip_len_mg(list) != 1) {
/* If there aren't exactly two folds to this, it is
* outside the scope of this function */
/* Do not break within emoji flag sequences. That is, do not
* break between regional indicator (RI) symbols if there is an
* odd number of RI characters before the break point.
- * GB12 ^ (RI RI)* RI × RI
+ * GB12 sot (RI RI)* RI × RI
* GB13 [^RI] (RI RI)* RI × RI */
while (backup_one_GCB(strbeg,
* only if there are an even number of regional indicators
* preceding the position of the break.
*
- * sot (RI RI)* RI × RI
+ * sot (RI RI)* RI × RI
* [^RI] (RI RI)* RI × RI */
while (backup_one_LB(strbeg,
* odd number of RI characters before the potential break
* point.
*
- * WB15 ^ (RI RI)* RI × RI
+ * WB15 sot (RI RI)* RI × RI
* WB16 [^RI] (RI RI)* RI × RI */
while (backup_one_WB(&previous,
regnode *next;
U32 n = 0; /* general value; init to avoid compiler warning */
SSize_t ln = 0; /* len or last; init to avoid compiler warning */
+ SSize_t endref = 0; /* offset of end of backref when ln is start */
char *locinput = startpos;
char *pushinput; /* where to continue after a PUSH */
I32 nextchr; /* is always set to UCHARAT(locinput), or -1 at EOS */
SV *sv_yes_mark = NULL; /* last mark name we have seen
during a successful match */
U32 lastopen = 0; /* last open we saw */
- bool has_cutgroup = RX_HAS_CUTGROUP(rex) ? 1 : 0;
+ bool has_cutgroup = RXp_HAS_CUTGROUP(rex) ? 1 : 0;
SV* const oreplsv = GvSVn(PL_replgv);
/* these three flags are set by various ops to signal information to
* the very next op. They have a useful lifetime of exactly one loop
U8 gimme = G_SCALAR;
CV *caller_cv = NULL; /* who called us */
CV *last_pushed_cv = NULL; /* most recently called (?{}) CV */
- CHECKPOINT runops_cp; /* savestack position before executing EVAL */
U32 maxopenparen = 0; /* max '(' index seen so far */
int to_complement; /* Invert the result? */
_char_class_number classnum;
bool is_utf8_pat = reginfo->is_utf8_pat;
bool match = FALSE;
+ I32 orig_savestack_ix = PL_savestack_ix;
+ U8 * script_run_begin = NULL;
/* Solaris Studio 12.3 messes up fetching PL_charclass['\n'] */
#if (defined(__SUNPRO_C) && (__SUNPRO_C == 0x5120) && defined(__x86_64) && defined(USE_64_BIT_ALL))
}));
while (scan != NULL) {
-
-
next = scan + NEXT_OFF(scan);
if (next == scan)
next = NULL;
if (scan->flags == EXACTL || scan->flags == EXACTFLU8) {
_CHECK_AND_WARN_PROBLEMATIC_LOCALE;
if (utf8_target
+ && nextchr >= 0 /* guard against negative EOS value in nextchr */
&& UTF8_IS_ABOVE_LATIN1(nextchr)
&& scan->flags == EXACTL)
{
{
U8 *uc;
if ( ST.jump ) {
+ /* undo any captures done in the tail part of a branch,
+ * e.g.
+ * /(?:X(.)(.)|Y(.)).../
+ * where the trie just matches X then calls out to do the
+ * rest of the branch */
REGCP_UNWIND(ST.cp);
UNWIND_PAREN(ST.lastparen, ST.lastcloseparen);
}
if (locinput == reginfo->strbeg)
b1 = isWORDCHAR_LC('\n');
else {
- b1 = isWORDCHAR_LC_utf8(reghop3((U8*)locinput, -1,
- (U8*)(reginfo->strbeg)));
+ b1 = isWORDCHAR_LC_utf8_safe(reghop3((U8*)locinput, -1,
+ (U8*)(reginfo->strbeg)),
+ (U8*)(reginfo->strend));
}
b2 = (NEXTCHR_IS_EOS)
? isWORDCHAR_LC('\n')
- : isWORDCHAR_LC_utf8((U8*)locinput);
+ : isWORDCHAR_LC_utf8_safe((U8*) locinput,
+ (U8*) reginfo->strend);
}
else { /* Here the string isn't utf8 */
b1 = (locinput == reginfo->strbeg)
bool b1, b2;
b1 = (locinput == reginfo->strbeg)
? 0 /* isWORDCHAR_L1('\n') */
- : isWORDCHAR_utf8(reghop3((U8*)locinput, -1,
- (U8*)(reginfo->strbeg)));
+ : isWORDCHAR_utf8_safe(
+ reghop3((U8*)locinput,
+ -1,
+ (U8*)(reginfo->strbeg)),
+ (U8*) reginfo->strend);
b2 = (NEXTCHR_IS_EOS)
? 0 /* isWORDCHAR_L1('\n') */
- : isWORDCHAR_utf8((U8*)locinput);
+ : isWORDCHAR_utf8_safe((U8*)locinput,
+ (U8*) reginfo->strend);
match = cBOOL(b1 != b2);
break;
}
}
break;
+ case ASCII:
+ if (NEXTCHR_IS_EOS || ! isASCII(UCHARAT(locinput))) {
+ sayNO;
+ }
+
+ locinput++; /* ASCII is always single byte */
+ break;
+
+ case NASCII:
+ if (NEXTCHR_IS_EOS || isASCII(UCHARAT(locinput))) {
+ sayNO;
+ }
+
+ goto increment_locinput;
+ break;
+
/* The argument (FLAGS) to all the POSIX node types is the class number
* */
break;
}
- if (! UTF8_IS_DOWNGRADEABLE_START(nextchr)) { /* An above Latin-1 code point */
- _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(locinput, reginfo->strend);
+ if (! UTF8_IS_NEXT_CHAR_DOWNGRADEABLE(locinput, reginfo->strend)) {
+ /* An above Latin-1 code point, or malformed */
+ _CHECK_AND_OUTPUT_WIDE_LOCALE_UTF8_MSG(locinput,
+ reginfo->strend);
goto utf8_posix_above_latin1;
}
}
locinput++;
}
- else if (UTF8_IS_DOWNGRADEABLE_START(nextchr)) {
+ else if (UTF8_IS_NEXT_CHAR_DOWNGRADEABLE(locinput, reginfo->strend)) {
if (! (to_complement
^ cBOOL(_generic_isCC(EIGHT_BIT_UTF8_TO_NATIVE(nextchr,
*(locinput + 1)),
do_nref_ref_common:
ln = rex->offs[n].start;
+ endref = rex->offs[n].end;
reginfo->poscache_iter = reginfo->poscache_maxiter; /* Void cache */
- if (rex->lastparen < n || ln == -1)
+ if (rex->lastparen < n || ln == -1 || endref == -1)
sayNO; /* Do not match unless seen CLOSEn. */
- if (ln == rex->offs[n].end)
+ if (ln == endref)
break;
s = reginfo->strbeg + ln;
* not going off the end given by reginfo->strend, and
* returns in <limit> upon success, how much of the
* current input was matched */
- if (! foldEQ_utf8_flags(s, NULL, rex->offs[n].end - ln, utf8_target,
+ if (! foldEQ_utf8_flags(s, NULL, endref - ln, utf8_target,
locinput, &limit, 0, utf8_target, utf8_fold_flags))
{
sayNO;
(type == REF ||
UCHARAT(s) != fold_array[nextchr]))
sayNO;
- ln = rex->offs[n].end - ln;
+ ln = endref - ln;
if (locinput + ln > reginfo->strend)
sayNO;
if (ln > 1 && (type == REF
goto eval_recurse_doit;
/* NOTREACHED */
- case EVAL: /* /(?{A})B/ /(??{A})B/ and /(?(?{A})X|Y)B/ */
+ case EVAL: /* /(?{...})B/ /(??{A})B/ and /(?(?{...})X|Y)B/ */
if (cur_eval && cur_eval->locinput==locinput) {
if ( ++nochange_depth > max_nochange_depth )
Perl_croak(aTHX_ "EVAL without pos change exceeded limit in regex");
/* save *all* paren positions */
regcppush(rex, 0, maxopenparen);
- REGCP_SET(runops_cp);
+ REGCP_SET(ST.lastcp);
if (!caller_cv)
caller_cv = find_runcv(NULL);
nop = (OP*)rexi->data->data[n];
}
- /* normally if we're about to execute code from the same
- * CV that we used previously, we just use the existing
- * CX stack entry. However, its possible that in the
- * meantime we may have backtracked, popped from the save
- * stack, and undone the SAVECOMPPAD(s) associated with
- * PUSH_MULTICALL; in which case PL_comppad no longer
- * points to newcv's pad. */
+ /* Some notes about MULTICALL and the context and save stacks.
+ *
+ * In something like
+ * /...(?{ my $x)}...(?{ my $y)}...(?{ my $z)}.../
+ * since codeblocks don't introduce a new scope (so that
+ * local() etc accumulate), at the end of a successful
+ * match there will be a SAVEt_CLEARSV on the savestack
+ * for each of $x, $y, $z. If the three code blocks above
+ * happen to have come from different CVs (e.g. via
+ * embedded qr//s), then we must ensure that during any
+ * savestack unwinding, PL_comppad always points to the
+ * right pad at each moment. We achieve this by
+ * interleaving SAVEt_COMPPAD's on the savestack whenever
+ * there is a change of pad.
+ * In theory whenever we call a code block, we should
+ * push a CXt_SUB context, then pop it on return from
+ * that code block. This causes a bit of an issue in that
+ * normally popping a context also clears the savestack
+ * back to cx->blk_oldsaveix, but here we specifically
+ * don't want to clear the save stack on exit from the
+ * code block.
+ * Also for efficiency we don't want to keep pushing and
+ * popping the single SUB context as we backtrack etc.
+ * So instead, we push a single context the first time
+ * we need, it, then hang onto it until the end of this
+ * function. Whenever we encounter a new code block, we
+ * update the CV etc if that's changed. During the times
+ * in this function where we're not executing a code
+ * block, having the SUB context still there is a bit
+ * naughty - but we hope that no-one notices.
+ * When the SUB context is initially pushed, we fake up
+ * cx->blk_oldsaveix to be as if we'd pushed this context
+ * on first entry to S_regmatch rather than at some random
+ * point during the regexe execution. That way if we
+ * croak, popping the context stack will ensure that
+ * *everything* SAVEd by this function is undone and then
+ * the context popped, rather than e.g., popping the
+ * context (and restoring the original PL_comppad) then
+ * popping more of the savestack and restoring a bad
+ * PL_comppad.
+ */
+
+ /* If this is the first EVAL, push a MULTICALL. On
+ * subsequent calls, if we're executing a different CV, or
+ * if PL_comppad has got messed up from backtracking
+ * through SAVECOMPPADs, then refresh the context.
+ */
if (newcv != last_pushed_cv || PL_comppad != last_pad)
{
U8 flags = (CXp_SUB_RE |
((newcv == caller_cv) ? CXp_SUB_RE_FAKE : 0));
+ SAVECOMPPAD();
if (last_pushed_cv) {
- /* PUSH/POP_MULTICALL save and restore the
- * caller's PL_comppad; if we call multiple subs
- * using the same CX block, we have to save and
- * unwind the varying PL_comppad's ourselves,
- * especially restoring the right PL_comppad on
- * backtrack - so save it on the save stack */
- SAVECOMPPAD();
CHANGE_MULTICALL_FLAGS(newcv, flags);
}
else {
PUSH_MULTICALL_FLAGS(newcv, flags);
}
+ /* see notes above */
+ CX_CUR()->blk_oldsaveix = orig_savestack_ix;
+
last_pushed_cv = newcv;
}
else {
if (logical == 0) /* (?{})/ */
sv_setsv(save_scalar(PL_replgv), ret); /* $^R */
else if (logical == 1) { /* /(?(?{...})X|Y)/ */
- sw = cBOOL(SvTRUE(ret));
+ sw = cBOOL(SvTRUE_NN(ret));
logical = 0;
}
else { /* /(??{}) */
* in the regexp code uses the pad ! */
PL_op = oop;
PL_curcop = ocurcop;
- regcp_restore(rex, runops_cp, &maxopenparen);
+ regcp_restore(rex, ST.lastcp, &maxopenparen);
PL_curpm_under = PL_curpm;
PL_curpm = PL_reg_curpm;
- if (logical != 2)
- break;
+ if (logical != 2) {
+ PUSH_STATE_GOTO(EVAL_B, next, locinput);
+ /* NOTREACHED */
+ }
}
/* only /(??{})/ from now on */
ST.prev_eval = cur_eval;
cur_eval = st;
/* now continue from first node in postoned RE */
- PUSH_YES_STATE_GOTO(EVAL_AB, startpoint, locinput);
+ PUSH_YES_STATE_GOTO(EVAL_postponed_AB, startpoint, locinput);
NOT_REACHED; /* NOTREACHED */
}
- case EVAL_AB: /* cleanup after a successful (??{A})B */
+ case EVAL_postponed_AB: /* cleanup after a successful (??{A})B */
/* note: this is called twice; first after popping B, then A */
DEBUG_STACK_r({
Perl_re_exec_indentf( aTHX_ "EVAL_AB cur_eval=%p prev_eval=%p\n",
sayYES;
- case EVAL_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
+ case EVAL_B_fail: /* unsuccessful B in (?{...})B */
+ REGCP_UNWIND(ST.lastcp);
+ sayNO;
+
+ case EVAL_postponed_AB_fail: /* unsuccessfully ran A or B in (??{A})B */
/* note: this is called twice; first after popping B, then A */
DEBUG_STACK_r({
Perl_re_exec_indentf( aTHX_ "EVAL_AB_fail cur_eval=%p prev_eval=%p\n",
lastopen = n;
break;
+ case SROPEN: /* (*SCRIPT_RUN: */
+ script_run_begin = (U8 *) locinput;
+ break;
+
/* XXX really need to log other places start/end are set too */
#define CLOSE_CAPTURE \
rex->offs[n].start = rex->offs[n].start_tmp; \
break;
+ case SRCLOSE: /* (*SCRIPT_RUN: ... ) */
+
+ if (! isSCRIPT_RUN(script_run_begin, (U8 *) locinput, utf8_target))
+ {
+ sayNO;
+ }
+
+ break;
+
+
case ACCEPT: /* (*ACCEPT) */
if (scan->flags)
sv_yes_mark = MUTABLE_SV(rexi->data->data[ ARG( scan ) ]);
DEBUG_EXECUTE_r( Perl_re_exec_indentf( aTHX_ "whilem: (cache) already tried at this position...\n",
depth)
);
+ cur_curlyx->u.curlyx.count--;
sayNO; /* cache records failure */
}
ST.cache_offset = offset;
if (cur_curlyx->u.curlyx.minmod) {
ST.save_curlyx = cur_curlyx;
cur_curlyx = cur_curlyx->u.curlyx.prev_curlyx;
- ST.cp = regcppush(rex, ST.save_curlyx->u.curlyx.parenfloor,
- maxopenparen);
- REGCP_SET(ST.lastcp);
PUSH_YES_STATE_GOTO(WHILEM_B_min, ST.save_curlyx->u.curlyx.B,
locinput);
NOT_REACHED; /* NOTREACHED */
CACHEsayNO;
NOT_REACHED; /* NOTREACHED */
- case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
- /* FALLTHROUGH */
case WHILEM_A_pre_fail: /* just failed to match even minimal A */
REGCP_UNWIND(ST.lastcp);
regcppop(rex, &maxopenparen);
+ /* FALLTHROUGH */
+ case WHILEM_A_min_fail: /* just failed to match A in a minimal match */
cur_curlyx->u.curlyx.lastloc = ST.save_lastloc;
cur_curlyx->u.curlyx.count--;
CACHEsayNO;
case WHILEM_B_min_fail: /* just failed to match B in a minimal match */
cur_curlyx = ST.save_curlyx;
- REGCP_UNWIND(ST.lastcp);
- regcppop(rex, &maxopenparen);
if (cur_curlyx->u.curlyx.count >= /*max*/ARG2(cur_curlyx->u.curlyx.me)) {
/* Maximum greed exceeded */
);
/* Try grabbing another A and see if it helps. */
cur_curlyx->u.curlyx.lastloc = locinput;
- ST.cp = regcppush(rex, cur_curlyx->u.curlyx.parenfloor,
- maxopenparen);
- REGCP_SET(ST.lastcp);
PUSH_STATE_GOTO(WHILEM_A_min,
/*A*/ NEXTOPER(ST.save_curlyx->u.curlyx.me) + EXTRA_STEP_2ARGS,
locinput);
}
else { /* Not utf8_target */
if (ST.c1 == ST.c2) {
- while (locinput <= ST.maxpos &&
- UCHARAT(locinput) != ST.c1)
- locinput++;
- }
- else {
- while (locinput <= ST.maxpos
- && UCHARAT(locinput) != ST.c1
- && UCHARAT(locinput) != ST.c2)
- locinput++;
+ locinput = (char *) memchr(locinput,
+ ST.c1,
+ ST.maxpos + 1 - locinput);
+ if (! locinput) {
+ locinput = ST.maxpos + 1;
+ }
}
+ else {
+ U8 c1_c2_bits_differing = ST.c1 ^ ST.c2;
+
+ if (! isPOWER_OF_2(c1_c2_bits_differing)) {
+ while ( locinput <= ST.maxpos
+ && UCHARAT(locinput) != ST.c1
+ && UCHARAT(locinput) != ST.c2)
+ {
+ locinput++;
+ }
+ }
+ else {
+ /* If c1 and c2 only differ by a single bit, we can
+ * avoid a conditional each time through the loop,
+ * at the expense of a little preliminary setup and
+ * an extra mask each iteration. By masking out
+ * that bit, we match exactly two characters, c1
+ * and c2, and so we don't have to test for both.
+ * On both ASCII and EBCDIC platforms, most of the
+ * ASCII-range and Latin1-range folded equivalents
+ * differ only in a single bit, so this is actually
+ * the most common case. (e.g. 'A' 0x41 vs 'a'
+ * 0x61). */
+ U8 c1_masked = ST.c1 &~ c1_c2_bits_differing;
+ U8 c1_c2_mask = ~ c1_c2_bits_differing;
+ while ( locinput <= ST.maxpos
+ && (UCHARAT(locinput) & c1_c2_mask)
+ != c1_masked)
+ {
+ locinput++;
+ }
+ }
+ }
n = locinput - ST.oldloc;
}
if (locinput > ST.maxpos)
SET_RECURSE_LOCINPUT("FAKE-END[after]", cur_eval->locinput);
- PUSH_YES_STATE_GOTO(EVAL_AB, st->u.eval.prev_eval->u.eval.B,
+ PUSH_YES_STATE_GOTO(EVAL_postponed_AB, st->u.eval.prev_eval->u.eval.B,
locinput); /* match B */
}
assert(!NEXTCHR_IS_EOS);
if (utf8_target) {
locinput += PL_utf8skip[nextchr];
- /* locinput is allowed to go 1 char off the end, but not 2+ */
+ /* locinput is allowed to go 1 char off the end (signifying
+ * EOS), but not 2+ */
if (locinput > reginfo->strend)
sayNO;
}
DEBUG_STACK_r({
regmatch_state *cur = st;
regmatch_state *curyes = yes_state;
- int curd = depth;
+ U32 i;
regmatch_slab *slab = PL_regmatch_slab;
- for (;curd > -1 && (depth-curd < 3);cur--,curd--) {
+ for (i = 0; i < 3 && i <= depth; cur--,i++) {
if (cur < SLAB_FIRST(slab)) {
slab = slab->prev;
cur = SLAB_LAST(slab);
}
- Perl_re_exec_indentf( aTHX_ "#%-3d %-10s %s\n",
+ Perl_re_exec_indentf( aTHX_ "%4s #%-3d %-10s %s\n",
depth,
- curd, PL_reg_name[cur->resume_state],
+ i ? " " : "push",
+ depth - i, PL_reg_name[cur->resume_state],
(curyes == cur) ? "yes" : ""
);
if (curyes == cur)
if (last_pushed_cv) {
dSP;
+ /* see "Some notes about MULTICALL" above */
POP_MULTICALL;
PERL_UNUSED_VAR(SP);
}
+ else
+ LEAVE_SCOPE(orig_savestack_ix);
assert(!result || locinput - reginfo->strbeg >= 0);
return result ? locinput - reginfo->strbeg : -1;
}
}
else {
- while (scan < loceol &&
- (UCHARAT(scan) == c1 || UCHARAT(scan) == c2))
- {
- scan++;
+ /* See comments in regmatch() CURLY_B_min_known_fail. We avoid
+ * a conditional each time through the loop if the characters
+ * differ only in a single bit, as is the usual situation */
+ U8 c1_c2_bits_differing = c1 ^ c2;
+
+ if (isPOWER_OF_2(c1_c2_bits_differing)) {
+ U8 c1_masked = c1 & ~ c1_c2_bits_differing;
+ U8 c1_c2_mask = ~ c1_c2_bits_differing;
+
+ while ( scan < loceol
+ && (UCHARAT(scan) & c1_c2_mask) == c1_masked)
+ {
+ scan++;
+ }
+ }
+ else {
+ while ( scan < loceol
+ && (UCHARAT(scan) == c1 || UCHARAT(scan) == c2))
+ {
+ scan++;
+ }
}
}
}
scan += UTF8SKIP(scan);
hardcount++;
}
- } else {
- while (scan < loceol && REGINCLASS(prog, p, (U8*)scan, 0))
+ }
+ else if (ANYOF_FLAGS(p)) {
+ while (scan < loceol
+ && reginclass(prog, p, (U8*)scan, (U8*)scan+1, 0))
scan++;
+ }
+ else {
+ while (scan < loceol && ANYOF_BITMAP_TEST(p, *((U8*)scan)))
+ scan++;
+ }
+ break;
+
+ case ASCII:
+ if (utf8_target && loceol - scan > max) {
+
+ /* We didn't adjust <loceol> at the beginning of this routine
+ * because is UTF-8, but it is actually ok to do so, since here, to
+ * match, 1 char == 1 byte. */
+ loceol = scan + max;
+ }
+
+ scan = find_next_non_ascii(scan, loceol, utf8_target);
+ break;
+
+ case NASCII:
+ if (utf8_target) {
+ while ( hardcount < max
+ && scan < loceol
+ && ! isASCII_utf8_safe(scan, loceol))
+ {
+ scan += UTF8SKIP(scan);
+ hardcount++;
+ }
+ }
+ else {
+ scan = find_next_ascii(scan, loceol, utf8_target);
}
break;
/* The complement of something that matches only ASCII matches all
* non-ASCII, plus everything in ASCII that isn't in the class. */
while (hardcount < max && scan < loceol
- && (! isASCII_utf8(scan)
+ && ( ! isASCII_utf8_safe(scan, reginfo->strend)
|| ! _generic_isCC_A((U8) *scan, FLAGS(p))))
{
scan += UTF8SKIP(scan);
case _CC_ENUM_SPACE:
while (hardcount < max
&& scan < loceol
- && (to_complement ^ cBOOL(isSPACE_utf8(scan))))
+ && (to_complement
+ ^ cBOOL(isSPACE_utf8_safe(scan, loceol))))
{
scan += UTF8SKIP(scan);
hardcount++;
case _CC_ENUM_BLANK:
while (hardcount < max
&& scan < loceol
- && (to_complement ^ cBOOL(isBLANK_utf8(scan))))
+ && (to_complement
+ ^ cBOOL(isBLANK_utf8_safe(scan, loceol))))
{
scan += UTF8SKIP(scan);
hardcount++;
case _CC_ENUM_XDIGIT:
while (hardcount < max
&& scan < loceol
- && (to_complement ^ cBOOL(isXDIGIT_utf8(scan))))
+ && (to_complement
+ ^ cBOOL(isXDIGIT_utf8_safe(scan, loceol))))
{
scan += UTF8SKIP(scan);
hardcount++;
case _CC_ENUM_VERTSPACE:
while (hardcount < max
&& scan < loceol
- && (to_complement ^ cBOOL(isVERTWS_utf8(scan))))
+ && (to_complement
+ ^ cBOOL(isVERTWS_utf8_safe(scan, loceol))))
{
scan += UTF8SKIP(scan);
hardcount++;
case _CC_ENUM_CNTRL:
while (hardcount < max
&& scan < loceol
- && (to_complement ^ cBOOL(isCNTRL_utf8(scan))))
+ && (to_complement
+ ^ cBOOL(isCNTRL_utf8_safe(scan, loceol))))
{
scan += UTF8SKIP(scan);
hardcount++;
}
while (hardcount < max && scan < loceol
- && to_complement ^ cBOOL(_generic_utf8(
+ && to_complement ^ cBOOL(_generic_utf8_safe(
classnum,
scan,
+ loceol,
swash_fetch(PL_utf8_swash_ptrs[classnum],
(U8 *) scan,
TRUE))))
* UTF8_IS_INVARIANT() works even if not in UTF-8 */
if (! UTF8_IS_INVARIANT(c) && utf8_target) {
STRLEN c_len = 0;
- c = utf8n_to_uvchr(p, p_end - p, &c_len, ( UTF8_ALLOW_DEFAULT
- | UTF8_CHECK_ONLY));
- if (c_len == (STRLEN)-1)
- Perl_croak(aTHX_ "Malformed UTF-8 character (fatal)");
+ const U32 utf8n_flags = UTF8_ALLOW_DEFAULT;
+ c = utf8n_to_uvchr(p, p_end - p, &c_len, utf8n_flags | UTF8_CHECK_ONLY);
+ if (c_len == (STRLEN)-1) {
+ _force_out_malformed_utf8_message(p, p_end,
+ utf8n_flags,
+ 1 /* 1 means die */ );
+ NOT_REACHED; /* NOTREACHED */
+ }
if (c > 255 && OP(n) == ANYOFL && ! ANYOFL_UTF8_LOCALE_REQD(flags)) {
_CHECK_AND_OUTPUT_WIDE_LOCALE_CP_MSG(c);
}
if (off >= 0) {
while (off-- && s < lim) {
/* XXX could check well-formedness here */
- s += UTF8SKIP(s);
+ U8 *new_s = s + UTF8SKIP(s);
+ if (new_s > lim) /* lim may be in the middle of a long character */
+ return s;
+ s = new_s;
}
}
else {
return TRUE;
}
+#ifndef PERL_IN_XSUB_RE
+
+bool
+Perl__is_grapheme(pTHX_ const U8 * strbeg, const U8 * s, const U8 * strend, const UV cp)
+{
+ /* Temporary helper function for toke.c. Verify that the code point 'cp'
+ * is a stand-alone grapheme. The UTF-8 for 'cp' begins at position 's' in
+ * the larger string bounded by 'strbeg' and 'strend'.
+ *
+ * 'cp' needs to be assigned (if not a future version of the Unicode
+ * Standard could make it something that combines with adjacent characters,
+ * so code using it would then break), and there has to be a GCB break
+ * before and after the character. */
+
+ GCB_enum cp_gcb_val, prev_cp_gcb_val, next_cp_gcb_val;
+ const U8 * prev_cp_start;
+
+ PERL_ARGS_ASSERT__IS_GRAPHEME;
+
+ /* Unassigned code points are forbidden */
+ if (UNLIKELY(! ELEMENT_RANGE_MATCHES_INVLIST(
+ _invlist_search(PL_Assigned_invlist, cp))))
+ {
+ return FALSE;
+ }
+
+ cp_gcb_val = getGCB_VAL_CP(cp);
+
+ /* Find the GCB value of the previous code point in the input */
+ prev_cp_start = utf8_hop_back(s, -1, strbeg);
+ if (UNLIKELY(prev_cp_start == s)) {
+ prev_cp_gcb_val = GCB_EDGE;
+ }
+ else {
+ prev_cp_gcb_val = getGCB_VAL_UTF8(prev_cp_start, strend);
+ }
+
+ /* And check that is a grapheme boundary */
+ if (! isGCB(prev_cp_gcb_val, cp_gcb_val, strbeg, s,
+ TRUE /* is UTF-8 encoded */ ))
+ {
+ return FALSE;
+ }
+
+ /* Similarly verify there is a break between the current character and the
+ * following one */
+ s += UTF8SKIP(s);
+ if (s >= strend) {
+ next_cp_gcb_val = GCB_EDGE;
+ }
+ else {
+ next_cp_gcb_val = getGCB_VAL_UTF8(s, strend);
+ }
+
+ return isGCB(cp_gcb_val, next_cp_gcb_val, strbeg, s, TRUE);
+}
+
+#endif
+
+bool
+Perl_isSCRIPT_RUN(pTHX_ const U8 * s, const U8 * send, const bool utf8_target)
+{
+ /* Checks that every character in the sequence from 's' to 'send' is one of
+ * three scripts: Common, Inherited, and possibly one other. Additionally
+ * all decimal digits must come from the same consecutive sequence of 10.
+ * 'utf8_target' is TRUE iff the sequence is encoded in UTF-8.
+ *
+ * Basically, it looks at each character in the sequence to see if the
+ * above conditions are met; if not it fails. It uses an inversion map to
+ * find the enum corresponding to the script of each character. But this
+ * is complicated by the fact that a few code points can be in any of
+ * several scripts. The data has been constructed so that there are
+ * additional enum values (all negative) for these situations. The
+ * absolute value of those is an index into another table which contains
+ * pointers to auxiliary tables for each such situation. Each aux array
+ * lists all the scripts for the given situation. There is another,
+ * parallel, table that gives the number of entries in each aux table.
+ * These are all defined in charclass_invlists.h */
+
+ /* XXX Here are the additional things UTS 39 says could be done:
+ * Mark Chinese strings as “mixed script” if they contain both simplified
+ * (S) and traditional (T) Chinese characters, using the Unihan data in the
+ * Unicode Character Database [UCD]. The criterion can only be applied if
+ * the language of the string is known to be Chinese. So, for example, the
+ * string “写真だけの結婚式 ” is Japanese, and should not be marked as
+ * mixed script because of a mixture of S and T characters. Testing for
+ * whether a character is S or T needs to be based not on whether the
+ * character has a S or T variant , but whether the character is an S or T
+ * variant. khw notes that the sample contains a Hiragana character, and it
+ * is unclear if absence of any foreign script marks the script as
+ * "Chinese"
+ *
+ * Forbid sequences of the same nonspacing mark
+ *
+ * Check to see that all the characters are in the sets of exemplar
+ * characters for at least one language in the Unicode Common Locale Data
+ * Repository [CLDR]. */
+
+
+ /* Things that match /\d/u */
+ SV * decimals_invlist = PL_XPosix_ptrs[_CC_DIGIT];
+ UV * decimals_array = invlist_array(decimals_invlist);
+
+ /* What code point is the digit '0' of the script run? */
+ UV zero_of_run = 0;
+ SCX_enum script_of_run = SCX_INVALID; /* Illegal value */
+ SCX_enum script_of_char = SCX_INVALID;
+
+ /* If the script remains not fully determined from iteration to iteration,
+ * this is the current intersection of the possiblities. */
+ SCX_enum * intersection = NULL;
+ PERL_UINT_FAST8_T intersection_len = 0;
+
+ bool retval = TRUE;
+
+ assert(send > s);
+
+ PERL_ARGS_ASSERT_ISSCRIPT_RUN;
+
+ /* Look at each character in the sequence */
+ while (s < send) {
+ UV cp;
+
+ /* The code allows all scripts to use the ASCII digits. This is
+ * because they are used in commerce even in scripts that have their
+ * own set. Hence any ASCII ones found are ok, unless a digit from
+ * another set has already been encountered. (The other digit ranges
+ * in Common are not similarly blessed */
+ if (UNLIKELY(isDIGIT(*s))) {
+ if (zero_of_run > 0) {
+ if (zero_of_run != '0') {
+ retval = FALSE;
+ break;
+ }
+ }
+ else {
+ zero_of_run = '0';
+ }
+ s++;
+ continue;
+ }
+
+ /* Here, isn't an ASCII digit. Find the code point of the character */
+ if (utf8_target && ! UTF8_IS_INVARIANT(*s)) {
+ Size_t len;
+ cp = valid_utf8_to_uvchr((U8 *) s, &len);
+ s += len;
+ }
+ else {
+ cp = *(s++);
+ }
+
+ /* If is within the range [+0 .. +9] of the script's zero, it also is a
+ * digit in that script. We can skip the rest of this code for this
+ * character. */
+ if (UNLIKELY( zero_of_run > 0
+ && cp >= zero_of_run
+ && cp - zero_of_run <= 9))
+ {
+ continue;
+ }
+
+ /* Find the character's script. The correct values are hard-coded here
+ * for small-enough code points. */
+ if (cp < 0x2B9) { /* From inspection of Unicode db; extremely
+ unlikely to change */
+ if ( cp > 255
+ || ( isALPHA_L1(cp)
+ && LIKELY(cp != MICRO_SIGN_NATIVE)))
+ {
+ script_of_char = SCX_Latin;
+ }
+ else {
+ script_of_char = SCX_Common;
+ }
+ }
+ else {
+ script_of_char = _Perl_SCX_invmap[
+ _invlist_search(PL_SCX_invlist, cp)];
+ }
+
+ /* We arbitrarily accept a single unassigned character, but not in
+ * combination with anything else, and not a run of them. */
+ if ( UNLIKELY(script_of_run == SCX_Unknown)
+ || UNLIKELY( script_of_run != SCX_INVALID
+ && script_of_char == SCX_Unknown))
+ {
+ retval = FALSE;
+ break;
+ }
+
+ if (UNLIKELY(script_of_char == SCX_Unknown)) {
+ script_of_run = SCX_Unknown;
+ continue;
+ }
+
+ /* We accept 'inherited' script characters currently even at the
+ * beginning. (We know that no characters in Inherited are digits, or
+ * we'd have to check for that) */
+ if (UNLIKELY(script_of_char == SCX_Inherited)) {
+ continue;
+ }
+
+ /* If unknown, the run's script is set to the char's */
+ if (UNLIKELY(script_of_run == SCX_INVALID)) {
+ script_of_run = script_of_char;
+ }
+
+ /* All decimal digits must be from the same sequence of 10. Above, we
+ * handled any ASCII digits without descending to here. We also
+ * handled the case where we already knew what digit sequence is the
+ * one to use, and the character is in that sequence. Now that we know
+ * the script, we can use script_zeros[] to directly find which
+ * sequence the script uses, except in a few cases it returns 0 */
+ if (UNLIKELY(zero_of_run == 0) && script_of_char >= 0) {
+ zero_of_run = script_zeros[script_of_char];
+ }
+
+ /* Now we can see if the script of the character is the same as that of
+ * the run */
+ if (LIKELY(script_of_char == script_of_run)) {
+ /* By far the most common case */
+ goto scripts_match;
+ }
+
+ /* Here, the scripts of the run and the current character don't match
+ * exactly. The run could so far have been entirely characters from
+ * Common. It's now time to change its script to that of this
+ * non-Common character */
+ if (script_of_run == SCX_Common) {
+
+ /* But Common contains several sets of digits. Only the '0' set
+ * can be part of another script. */
+ if (zero_of_run > 0 && zero_of_run != '0') {
+ retval = FALSE;
+ break;
+ }
+
+ script_of_run = script_of_char;
+ goto scripts_match;
+ }
+
+ /* Here, the script of the run isn't Common. But characters in Common
+ * match any script */
+ if (script_of_char == SCX_Common) {
+ goto scripts_match;
+ }
+
+#ifndef HAS_SCX_AUX_TABLES
+
+ /* Too early a Unicode version to have a code point belonging to more
+ * than one script, so, if the scripts don't exactly match, fail */
+ retval = FALSE;
+ break;
+
+#else
+
+ /* Here there is no exact match between the character's script and the
+ * run's. And we've handled the special cases of scripts Unknown,
+ * Inherited, and Common.
+ *
+ * Negative script numbers signify that the value may be any of several
+ * scripts, and we need to look at auxiliary information to make our
+ * deterimination. But if both are non-negative, we can fail now */
+ if (LIKELY(script_of_char >= 0)) {
+ const SCX_enum * search_in;
+ PERL_UINT_FAST8_T search_in_len;
+ PERL_UINT_FAST8_T i;
+
+ if (LIKELY(script_of_run >= 0)) {
+ retval = FALSE;
+ break;
+ }
+
+ /* Use the previously constructed set of possible scripts, if any.
+ * */
+ if (intersection) {
+ search_in = intersection;
+ search_in_len = intersection_len;
+ }
+ else {
+ search_in = SCX_AUX_TABLE_ptrs[-script_of_run];
+ search_in_len = SCX_AUX_TABLE_lengths[-script_of_run];
+ }
+
+ for (i = 0; i < search_in_len; i++) {
+ if (search_in[i] == script_of_char) {
+ script_of_run = script_of_char;
+ goto scripts_match;
+ }
+ }
+
+ retval = FALSE;
+ break;
+ }
+ else if (LIKELY(script_of_run >= 0)) {
+ /* script of character could be one of several, but run is a single
+ * script */
+ const SCX_enum * search_in = SCX_AUX_TABLE_ptrs[-script_of_char];
+ const PERL_UINT_FAST8_T search_in_len
+ = SCX_AUX_TABLE_lengths[-script_of_char];
+ PERL_UINT_FAST8_T i;
+
+ for (i = 0; i < search_in_len; i++) {
+ if (search_in[i] == script_of_run) {
+ script_of_char = script_of_run;
+ goto scripts_match;
+ }
+ }
+
+ retval = FALSE;
+ break;
+ }
+ else {
+ /* Both run and char could be in one of several scripts. If the
+ * intersection is empty, then this character isn't in this script
+ * run. Otherwise, we need to calculate the intersection to use
+ * for future iterations of the loop, unless we are already at the
+ * final character */
+ const SCX_enum * search_char = SCX_AUX_TABLE_ptrs[-script_of_char];
+ const PERL_UINT_FAST8_T char_len
+ = SCX_AUX_TABLE_lengths[-script_of_char];
+ const SCX_enum * search_run;
+ PERL_UINT_FAST8_T run_len;
+
+ SCX_enum * new_overlap = NULL;
+ PERL_UINT_FAST8_T i, j;
+
+ if (intersection) {
+ search_run = intersection;
+ run_len = intersection_len;
+ }
+ else {
+ search_run = SCX_AUX_TABLE_ptrs[-script_of_run];
+ run_len = SCX_AUX_TABLE_lengths[-script_of_run];
+ }
+
+ intersection_len = 0;
+
+ for (i = 0; i < run_len; i++) {
+ for (j = 0; j < char_len; j++) {
+ if (search_run[i] == search_char[j]) {
+
+ /* Here, the script at i,j matches. That means this
+ * character is in the run. But continue on to find
+ * the complete intersection, for the next loop
+ * iteration, and for the digit check after it.
+ *
+ * On the first found common script, we malloc space
+ * for the intersection list for the worst case of the
+ * intersection, which is the minimum of the number of
+ * scripts remaining in each set. */
+ if (intersection_len == 0) {
+ Newx(new_overlap,
+ MIN(run_len - i, char_len - j),
+ SCX_enum);
+ }
+ new_overlap[intersection_len++] = search_run[i];
+ }
+ }
+ }
+
+ /* Here we've looked through everything. If they have no scripts
+ * in common, not a run */
+ if (intersection_len == 0) {
+ retval = FALSE;
+ break;
+ }
+
+ /* If there is only a single script in common, set to that.
+ * Otherwise, use the intersection going forward */
+ Safefree(intersection);
+ if (intersection_len == 1) {
+ script_of_run = script_of_char = new_overlap[0];
+ Safefree(new_overlap);
+ }
+ else {
+ intersection = new_overlap;
+ }
+ }
+
+#endif
+
+ scripts_match:
+
+ /* Here, the script of the character is compatible with that of the
+ * run. Either they match exactly, or one or both can be any of
+ * several scripts, and the intersection is not empty. If the
+ * character is not a decimal digit, we are done with it. Otherwise,
+ * it could still fail if it is from a different set of 10 than seen
+ * already (or we may not have seen any, and we need to set the
+ * sequence). If we have determined a single script and that script
+ * only has one set of digits (almost all scripts are like that), then
+ * this isn't a problem, as any digit must come from the same sequence.
+ * The only scripts that have multiple sequences have been constructed
+ * to be 0 in 'script_zeros[]'.
+ *
+ * Here we check if it is a digit. */
+ if ( cp >= FIRST_NON_ASCII_DECIMAL_DIGIT
+ && ( ( zero_of_run == 0
+ || ( ( script_of_char >= 0
+ && script_zeros[script_of_char] == 0)
+ || intersection))))
+ {
+ SSize_t range_zero_index;
+ range_zero_index = _invlist_search(decimals_invlist, cp);
+ if ( LIKELY(range_zero_index >= 0)
+ && ELEMENT_RANGE_MATCHES_INVLIST(range_zero_index))
+ {
+ UV range_zero = decimals_array[range_zero_index];
+ if (zero_of_run) {
+ if (zero_of_run != range_zero) {
+ retval = FALSE;
+ break;
+ }
+ }
+ else {
+ zero_of_run = range_zero;
+ }
+ }
+ }
+ } /* end of looping through CLOSESR text */
+
+ Safefree(intersection);
+ return retval;
+}
+
+
/*
* ex: set ts=8 sts=4 sw=4 et:
*/
https://perl5.git.perl.org / perl5.git / blobdiff