# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl59.dll). Also makes individual DLLs for the XS extensions.
+# (perl511.dll). Also makes individual DLLs for the XS extensions.
#
##
INST_TOP *= $(INST_DRV)\perl
#
+# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
+# on a 64-bit version of Windows.
+#WIN64 *= undef
+
+#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location. Leaving it enabled is
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.10.0
+#INST_VER *= \5.11.2
#
# Comment this out if you DON'T want your perl installation to have
#CCTYPE *= MSVC90
# Borland 5.02 or later
#CCTYPE *= BORLAND
-# MinGW with gcc-2.95.2 or later
+# MinGW or mingw-w64 with gcc-2.95.2 or later
CCTYPE *= GCC
#
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl59s.lib will also be created.
+# variables below. A static library perl511s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC *= define
CCLIBDIR *= $(CCHOME)\lib
#
+# If building with gcc-4.x.x (or x86_64-w64-mingw32-gcc-4.x.x), then
+# uncomment the following assignment to GCC_4XX, make sure that CCHOME
+# has been set correctly above, and uncomment the appropriate
+# GCCHELPERDLL line.
+# The name of the dll can change, depending upon which vendor has supplied
+# your 4.x.x compiler, and upon the values of "x".
+# (The dll will be in your mingw/bin folder, so check there if you're
+# unsure about the correct name.)
+# Without these corrections, the op/taint.t test script will fail.
+#
+#GCC_4XX *= define
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_sjlj-1.dll
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_dw2-1.dll
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_1.dll
+
+#
+# uncomment this if you are using x86_64-w64-mingw32 cross-compiler
+# ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
+# instead of the usual 'gcc'.
+#
+#GCCCROSS *= define
+
+#
# Additional compiler flags can be specified here.
#
BUILDOPT *= $(BUILDOPTEXTRA)
BUILDOPT += -DPERL_IMPLICIT_SYS
.ENDIF
-.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432
+.IMPORT .IGNORE : PROCESSOR_ARCHITECTURE PROCESSOR_ARCHITEW6432 WIN64
PROCESSOR_ARCHITECTURE *= x86
# Visual C++ 2005 and 2008 (VC++ 8.x and 9.x) create manifest files for EXEs and
# DLLs. These either need copying everywhere with the binaries, or else need
-# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. Embed
-# them for simplicity, and delete them afterwards so that they don't get
-# installed too.
-.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
- "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
-EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
- del $@.manifest
-EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
- del $@.manifest
-.ENDIF
+# embedding in them otherwise MSVCR80.dll or MSVCR90.dll won't be found. For
+# simplicity, embed them if they exist (and delete them afterwards so that they
+# don't get installed too).
+EMBED_EXE_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
+ if exist $@.manifest del $@.manifest
+EMBED_DLL_MANI = if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
+ if exist $@.manifest del $@.manifest
ARCHDIR = ..\lib\$(ARCHNAME)
COREDIR = ..\lib\CORE
AUTODIR = ..\lib\auto
LIBDIR = ..\lib
EXTDIR = ..\ext
+DISTDIR = ..\dist
+CPANDIR = ..\cpan
PODDIR = ..\pod
EXTUTILSDIR = $(LIBDIR)\ExtUtils
HTMLDIR = .\html
kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib \
+ version.lib odbc32.lib odbccp32.lib comctl32.lib \
import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
.ELIF "$(CCTYPE)" == "GCC"
-CC = gcc
-LINK32 = g++
-LIB32 = ar rc
-IMPLIB = dlltool
-RSC = windres
+.IF "$(GCCCROSS)" == "define"
+ARCHPREFIX = x86_64-w64-mingw32-
+.ENDIF
+
+CC = $(ARCHPREFIX)gcc
+LINK32 = $(ARCHPREFIX)g++
+LIB32 = $(ARCHPREFIX)ar rc
+IMPLIB = $(ARCHPREFIX)dlltool
+RSC = $(ARCHPREFIX)windres
i = .i
o = .o
INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
DEFINES = -DWIN32 $(CRYPT_FLAG)
+.IF "$(WIN64)" == "define"
+DEFINES += -DWIN64 -DCONSERVATIVE
+.ENDIF
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -xc++
-LIBC = -lmsvcrt
+# Current releases of MinGW 5.1.4 (as of 11-Aug-2009) will fail to link
+# correctly if -lmsvcrt is specified explicitly.
+LIBC =
+#LIBC = -lmsvcrt
# same libs as MSVC
LIBFILES = $(CRYPT_LIB) $(LIBC) \
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
- -lwinmm -lversion -lodbc32 -lodbccp32
+ -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
# NOTE: we assume that GCC uses MSVCRT.DLL
# See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
-BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
+BUILDOPT += -fno-strict-aliasing -mms-bitfields -DPERL_MSVCRT_READFIX
.ELSE
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib odbc32.lib odbccp32.lib comctl32.lib
# The 64 bit Platform SDK compilers contain a runtime library that doesn't
# include the buffer overrun verification code used by the /GS switch.
# Since the code links against libraries that are compiled with /GS, this
# "security cookie verification" must be included via bufferoverlow.lib.
.IF "$(WIN64)" == "define"
-LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
+LIBBASEFILES += bufferoverflowU.lib
.ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
+ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
+LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
+.ELSE
+RSC_FLAGS = -DINCLUDE_MANIFEST
+.ENDIF
+
+
# used to allow local linking flags that are not propogated into Config.pm,
# currently unused
# -- BKS, 12-12-1999
.rc.res:
.IF "$(CCTYPE)" == "GCC"
- $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -i $< -o $@
+ $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
.ELSE
- $(RSC) -i.. $<
+ $(RSC) -i.. -DINCLUDE_MANIFEST $<
.ENDIF
#
.ENDIF
# Unicode data files generated by mktables
-UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
- ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
- ..\lib\unicore\PVA.pl
+ ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
# Directories of Unicode data files generated by mktables
UNIDATADIR1 = ..\lib\unicore\To
UNIDATADIR2 = ..\lib\unicore\lib
+PERLEXE_MANIFEST= .\perlexe.manifest
PERLEXE_ICO = .\perlexe.ico
PERLEXE_RES = .\perlexe.res
PERLDLL_RES =
..\utils\cpan2dist \
..\utils\shasum \
..\utils\instmodsh \
- ..\pod\checkpods \
..\pod\pod2html \
..\pod\pod2latex \
..\pod\pod2man \
.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(WIN64)" == "define"
+.IF "$(GCCCROSS)" == "define"
+CFGSH_TMPL = config.gc64
+CFGH_TMPL = config_H.gc64
+.ELSE
+CFGSH_TMPL = config.gc64nox
+CFGH_TMPL = config_H.gc64nox
+.ENDIF
+.ELSE
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl59$(a)
-PERLSTATICLIB = ..\libperl59s$(a)
+.ENDIF
+PERLIMPLIB = ..\libperl511$(a)
+PERLSTATICLIB = ..\libperl511s$(a)
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= ..\perl59$(a)
-PERLSTATICLIB *= ..\perl59s$(a)
-PERLDLL = ..\perl59.dll
+PERLIMPLIB *= ..\perl511$(a)
+PERLSTATICLIB *= ..\perl511s$(a)
+PERLDLL = ..\perl511.dll
XCOPY = xcopy /f /r /i /d /y
RCOPY = xcopy /f /r /i /e /d /y
NOOP = @rem
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
MICROCORE_SRC = \
..\av.c \
..\deb.c \
..\toke.c \
..\universal.c \
..\utf8.c \
- ..\util.c \
- ..\xsutils.c
+ ..\util.c
EXTRACORE_SRC += perllib.c
WIN32_SRC += .\$(CRYPT_SRC)
.ENDIF
-DLL_SRC = $(DYNALOADER).c
-
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
.\include\sys\socket.h \
.\win32.h
-CORE_H = $(CORE_NOCFG_H) .\config.h
+CORE_H = $(CORE_NOCFG_H) .\config.h ..\git_version.h
UUDMAP_H = ..\uudmap.h
+BITCOUNT_H = ..\bitcount.h
MICROCORE_OBJ = $(MICROCORE_SRC:db:+$(o))
CORE_OBJ = $(MICROCORE_OBJ) $(EXTRACORE_SRC:db:+$(o))
MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:db:+$(o))
+DLL_OBJ = $(DYNALOADER)
X2P_OBJ = $(X2P_SRC:db:+$(o))
GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
# - Win32 extension contains overlapped symbols with win32.c (BUG!)
# - MakeMaker isn't capable enough for SDBM_File (smaller bug)
# - Encode (encoding search algorithm relies on shared library?)
-# - Hash/Util (fails various tests when linked statically)
-STATIC_EXT = * !Win32 !SDBM_File !Encode !Hash/Util
+STATIC_EXT = * !Win32 !SDBM_File !Encode
.ELSE
# specify static extensions here, for example:
#STATIC_EXT = Cwd Compress/Raw/Zlib
STATIC_EXT = Win32CORE
.ENDIF
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+DYNALOADER = ..\DynaLoader$(o)
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
ODBCCP32_DLL = $(windir)\system\odbccp32.dll
.ENDIF
+ICWD = -I..\cpan\Cwd -I..\cpan\Cwd\lib
+
#
# Top targets
#
-all : CHECKDMAKE .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
- $(PERLEXE) $(X2P) Extensions $(PERLSTATIC)
-
-..\regnodes.h : ..\regcomp.sym ..\regcomp.pl ..\regexp.h
- cd .. && regcomp.pl && cd win32
+all : CHECKDMAKE .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) MakePPPort \
+ $(PERLEXE) $(X2P) Extensions Extensions_nonxs $(PERLSTATIC)
..\regcharclass.h : ..\Porting\regcharclass.pl
- cd .. && Porting\regcharclass.pl && cd win32
+ cd .. && miniperl Porting\regcharclass.pl && cd win32
regnodes : ..\regnodes.h
..\regexec$(o) : ..\regnodes.h ..\regcharclass.h
-reonly : regnodes .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
- $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
+reonly : regnodes .\config.h ..\git_version.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions_reonly
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
static: $(PERLEXESTATIC)
#----------------------------------------------------------------
-del /f config.h
copy $(CFGH_TMPL) config.h
+..\git_version.h : $(MINIPERL) ..\make_patchnum.pl
+ cd .. && miniperl -Ilib make_patchnum.pl
+
+# make sure that we recompile perl.c if the git version changes
+..\perl$(o) : ..\git_version.h
+
..\config.sh : config.w32 $(MINIPERL) config_sh.PL FindExt.pm
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file \
$(mktmp $(CFG_VARS)) config.w32 > ..\config.sh
-# this target is for when changes to the main config.sh happen
-# edit config.{b,v,g}c and make this target once for each supported
-# compiler (e.g. `dmake CCTYPE=BORLAND regen_config_h`)
+# this target is for when changes to the main config.sh happen.
+# edit config.gc, then make perl using GCC in a minimal configuration (i.e.
+# with MULTI, ITHREADS, IMP_SYS, LARGE_FILES, PERLIO and CRYPT off), then make
+# this target to regenerate config_H.gc.
+# unfortunately, some further manual editing is also then required to restore all
+# the special _MSC_VER handling that is otherwise lost.
+# repeat for config.bc and config_H.bc (using BORLAND), except that there is no
+# _MSC_VER stuff in that case.
regen_config_h:
- perl config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
+ $(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
$(CFGSH_TMPL) > ..\config.sh
- -cd .. && del /f perl.exe
- -cd .. && del /f perl*.dll
- cd .. && perl configpm
+ $(MINIPERL) -I..\lib ..\configpm --chdir=..
-del /f $(CFGH_TMPL)
- -mkdir $(COREDIR)
- -perl config_h.PL "INST_VER=$(INST_VER)"
+ -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
+ $(MINIPERL) -I..\lib ..\configpm --chdir=..
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ $(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
|| $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
if not exist "$(MINIDIR)" mkdir "$(MINIDIR)"
$(MINICORE_OBJ) : $(CORE_NOCFG_H)
- $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB $(OBJOUT_FLAG)$@ ..\$(*B).c
+ $(CC) -c $(CFLAGS) -DPERL_EXTERNAL_GLOB -DPERL_IS_MINIPERL $(OBJOUT_FLAG)$@ ..\$(*B).c
$(MINIWIN32_OBJ) : $(CORE_NOCFG_H)
$(CC) -c $(CFLAGS) $(OBJOUT_FLAG)$@ $(*B).c
# 1. we don't want to rebuild miniperl.exe when config.h changes
# 2. we don't want to rebuild miniperl.exe with non-default config.h
+# 3. we can't have miniperl.exe depend on git_version.h, as miniperl creates it
$(MINI_OBJ) : $(CORE_NOCFG_H)
$(WIN32_OBJ) : $(CORE_H)
$(X2P_OBJ) : $(CORE_H)
-perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl
- $(MINIPERL) -I..\lib buildext.pl --create-perllibst-h
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
+ $(MINIPERL) -I..\lib create_perllibst_h.pl
+ $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
$(mktmp $(LKPRE) $(PERLDLL_OBJ) \
$(shell @type Extensions_static) \
$(LIBFILES) $(LKPOST))
- dlltool --output-lib $(PERLIMPLIB) \
+ $(IMPLIB) --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--def perldll.def \
--base-file perl.base \
.ENDIF
$(XCOPY) $(PERLSTATICLIB) $(COREDIR)
-$(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
- $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
-
-$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
..\x2p\walk$(o) : ..\x2p\walk.c
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
-$(X2P) : $(MINIPERL) $(X2P_OBJ)
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
+$(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
+ $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
+ $(MINIPERL) -I..\lib ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
$(EMBED_EXE_MANI)
.ENDIF
-$(MINIDIR)\globals$(o) : $(UUDMAP_H)
+$(MINIDIR)\globals$(o) : $(UUDMAP_H) $(BITCOUNT_H)
-$(UUDMAP_H) : $(GENUUDMAP)
- $(GENUUDMAP) >$(UUDMAP_H)
+$(UUDMAP_H) $(BITCOUNT_H) : $(GENUUDMAP)
+ $(GENUUDMAP) $(UUDMAP_H) $(BITCOUNT_H)
$(GENUUDMAP) : $(GENUUDMAP_OBJ)
.IF "$(CCTYPE)" == "BORLAND"
.ENDIF
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(EMBED_EXE_MANI)
.ENDIF
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
+MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
+ $(MINIPERL) -I..\lib $(ICWD) ..\mkppport
-MakePPPort: $(MINIPERL) $(CONFIGPM)
- $(MINIPERL) -I..\lib ..\mkppport
+#-------------------------------------------------------------------------------
+# There's no direct way to mark a dependency on
+# DynaLoader.pm, so this will have to do
+Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
-MakePPPort_clean:
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
+Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
-#-------------------------------------------------------------------------------
-Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
+Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
- -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
+ $(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
-Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
+Extensions_nonxs : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
- -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
-Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
+$(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
- -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
- $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
Extensions_clean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
- -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
Extensions_realclean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
- -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
#-------------------------------------------------------------------------------
-doc: $(PERLEXE)
+doc: $(PERLEXE) ..\pod\perltoc.pod
$(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
# so please check that script before making structural changes here
utils: $(PERLEXE) $(X2P)
cd ..\utils && $(MAKE) PERL=$(MINIPERL)
- copy ..\vms\perlvms.pod ..\pod\perlvms.pod
copy ..\README.aix ..\pod\perlaix.pod
copy ..\README.amiga ..\pod\perlamiga.pod
copy ..\README.apollo ..\pod\perlapollo.pod
copy ..\README.dos ..\pod\perldos.pod
copy ..\README.epoc ..\pod\perlepoc.pod
copy ..\README.freebsd ..\pod\perlfreebsd.pod
+ copy ..\README.haiku ..\pod\perlhaiku.pod
copy ..\README.hpux ..\pod\perlhpux.pod
copy ..\README.hurd ..\pod\perlhurd.pod
copy ..\README.irix ..\pod\perlirix.pod
copy ..\README.jp ..\pod\perljp.pod
copy ..\README.ko ..\pod\perlko.pod
copy ..\README.linux ..\pod\perllinux.pod
- copy ..\README.machten ..\pod\perlmachten.pod
copy ..\README.macos ..\pod\perlmacos.pod
copy ..\README.macosx ..\pod\perlmacosx.pod
- copy ..\README.mint ..\pod\perlmint.pod
copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vmesa ..\pod\perlvmesa.pod
- copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl5113delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
+ $(PERLEXE) $(ICWD) ..\autodoc.pl ..
+ $(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
+
+..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
+ $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
$(PERLEXESTATIC) $(PERLSTATICLIB)
-del /f *.def *.map
- -del /f $(DYNALOADER).c
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
- -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
- -del /f $(LIBDIR)\.exists $(LIBDIR)\attrs.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
+ -del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\Win32CORE.pm
-del /f $(LIBDIR)\Win32API\File.pm
-del /f $(LIBDIR)\Win32API\File\cFile.pc
+ -del /f $(DISTDIR)\XSLoader\XSLoader.pm
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
-if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
-if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+ -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
+ -if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
+ -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
+ -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
-if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
-if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
-if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
- -cd $(PODDIR) && del /f *.html *.bat checkpods \
- perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
- perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
- perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
- perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
- perljp.pod perlko.pod perllinux.pod perlmachten.pod \
- perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
- perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
- perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
- perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
- perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
- perlwin32.pod \
+ -cd $(PODDIR) && del /f *.html *.bat podchecker \
+ perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
+ perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
+ perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
+ perlepoc.pod perlfreebsd.pod perlhaiku.pod perlhpux.pod \
+ perlhurd.pod perlintern.pod perlirix.pod perljp.pod perlko.pod \
+ perllinux.pod perlmacos.pod perlmacosx.pod perlmodlib.pod \
+ perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
+ perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
+ perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
+ perltru64.pod perltw.pod perluniprops.pod perluts.pod \
+ perlvmesa.pod perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
- podchecker podselect
+ podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
-cd ..\x2p && del /f find2perl s2p psed *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
+ -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
perlmainst.c
-del /f $(CONFIGPM)
+ -del /f ..\lib\Config_git.pl
-del /f bin\*.bat
-del /f perllibst.h
- -del /f $(PERLEXE_ICO) perl.base
- -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
+ -del /f $(PERLEXE_RES) perl.base
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
+ -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-if exist pod2htmd.tmp del pod2htmd.tmp
-if exist pod2htmi.tmp del pod2htmi.tmp
-if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
+ -del /f ..\t\test_state
install : all installbare installhtml
-installbare : $(RIGHTMAKE) utils
+installbare : $(RIGHTMAKE) utils ..\pod\perltoc.pod
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
$(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-$(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables
+$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
cd ..\lib\unicore && \
- ..\$(MINIPERL) -I.. mktables
+ ..\$(MINIPERL) -I.. -I..\..\cpan\Cwd\lib -I..\..\cpan\Cwd mktables -P ..\..\pod -maketest -makelist -p
minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
cd ..\t && \
$(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-unpack_files:
- $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
-
-cleanup_unpacked_files:
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
-
-test-prep : all utils unpack_files
+test-prep : all utils
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
+.IF "$(CCTYPE)" == "GCC"
+.IF "$(GCC_4XX)" == "define"
+ $(XCOPY) $(GCCHELPERDLL) ..\t\$(NULL)
+.ENDIF
+.ENDIF
test : $(RIGHTMAKE) test-prep
cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
cd ..\t && \
- $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
+ $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\\/ $(EXTRA) && \
cd ..\win32
regen :
-@erase perlmainst$(o)
-@erase config.w32
-@erase /f config.h
+ -@erase /f ..\git_version.h
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
-@erase $(WPERLEXE)
-@erase $(PERLSTATICLIB)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
- -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H)
+ -@erase $(GENUUDMAP) $(GENUUDMAP_OBJ) $(UUDMAP_H) $(BITCOUNT_H)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
-_preclean : cleanup_unpacked_files
-
-clean : _preclean Extensions_clean _clean
+clean : Extensions_clean _clean
-realclean : _preclean Extensions_realclean MakePPPort_clean _clean
+realclean : Extensions_realclean _clean
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.