=head1 NAME
-perlwin32 - Perl under Win32
+perlwin32 - Perl under Windows
=head1 SYNOPSIS
-These are instructions for building Perl under Windows NT (versions
-3.51 or 4.0), using Visual C++ (versions 2.0 through 5.0). Currently,
-this port may also build under Windows95, but you can expect problems
-stemming from the unmentionable command shell that infests that
-platform. Note this caveat is only about B<building> perl. Once
-built, you should be able to B<use> it on either Win32 platform (modulo
-the problems arising from the inferior command shell).
+These are instructions for building Perl under Windows 9x/NT/2000/XP
+on the Intel x86 and Itanium architectures.
=head1 DESCRIPTION
Before you start, you should glance through the README file
-found in the top-level directory where the Perl distribution
+found in the top-level directory to which the Perl distribution
was extracted. Make sure you read and understand the terms under
which this software is being distributed.
-Also make sure you read the L<BUGS AND CAVEATS> section below for the
+Also make sure you read L<BUGS AND CAVEATS> below for the
known limitations of this port.
The INSTALL file in the perl top-level has much information that is
"Configure".
You may also want to look at two other options for building
-a perl that will work on Windows NT: the README.cygwin32 and
-README.os2 files, which give a different set of rules to build a
-Perl that will work on Win32 platforms. Those two methods will
-probably enable you to build a more Unix-compatible perl, but you
-will also need to download and use various other build-time and
+a perl that will work on Windows NT: the README.cygwin and
+README.os2 files, each of which give a different set of rules to
+build a Perl that will work on Win32 platforms. Those two methods
+will probably enable you to build a more Unix-compatible perl, but
+you will also need to download and use various other build-time and
run-time support software described in those files.
This set of instructions is meant to describe a so-called "native"
-port of Perl to Win32 platforms. The resulting Perl requires no
+port of Perl to Win32 platforms. This includes both 32-bit and
+64-bit Windows operating systems. The resulting Perl requires no
additional software to run (other than what came with your operating
-system). Currently, this port is only capable of using Microsoft's
-Visual C++ compiler. The ultimate goal is to support the other major
-compilers that can generally be used to build Win32 applications.
+system). Currently, this port is capable of using one of the
+following compilers on the Intel x86 architecture:
-This port currently supports MakeMaker (the set of modules that
+ Borland C++ version 5.02 or later
+ Microsoft Visual C++ version 4.2 or later
+ MinGW with gcc gcc version 2.95.2 or later
+
+The last of these is a high quality freeware compiler. Use version
+3.2.x or later for the best results with this compiler.
+
+This port can also be built on the Intel IA64 using:
+
+ Microsoft Platform SDK Nov 2001 (64-bit compiler and tools)
+
+The MS Platform SDK can be downloaded from http://www.microsoft.com/.
+
+This port fully supports MakeMaker (the set of modules that
is used to build extensions to perl). Therefore, you should be
able to build and install most extensions found in the CPAN sites.
-See the L<Usage Hints> section for general hints about this.
+See L<Usage Hints for Perl on Win32> below for general hints about this.
-=head2 Setting Up
+=head2 Setting Up Perl on Win32
=over 4
-=item *
+=item Make
+
+You need a "make" program to build the sources. If you are using
+Visual C++ or the Platform SDK tools under Windows NT/2000/XP, nmake
+will work. All other builds need dmake.
+
+dmake is a freely available make that has very nice macro features
+and parallelability.
+
+A port of dmake for Windows is available from:
+
+ http://www.cpan.org/authors/id/GSAR/dmake-4.1pl1-win32.zip
+
+(This is a fixed version of the original dmake sources obtained from
+http://www.wticorp.com/ As of version 4.1PL1, the original
+sources did not build as shipped and had various other problems.
+A patch is included in the above fixed version.)
+
+Fetch and install dmake somewhere on your path (follow the instructions
+in the README.NOW file).
+
+There exists a minor coexistence problem with dmake and Borland C++
+compilers. Namely, if a distribution has C files named with mixed
+case letters, they will be compiled into appropriate .obj-files named
+with all lowercase letters, and every time dmake is invoked
+to bring files up to date, it will try to recompile such files again.
+For example, Tk distribution has a lot of such files, resulting in
+needless recompiles every time dmake is invoked. To avoid this, you
+may use the script "sync_ext.pl" after a successful build. It is
+available in the win32 subdirectory of the Perl source distribution.
+
+=item Command Shell
+
+Use the default "cmd" shell that comes with NT. Some versions of the
+popular 4DOS/NT shell have incompatibilities that may cause you trouble.
+If the build fails under that shell, try building again with the cmd
+shell.
+
+The nmake Makefile also has known incompatibilities with the
+"command.com" shell that comes with Windows 9x. You will need to
+use dmake and makefile.mk to build under Windows 9x.
+
+The surest way to build it is on Windows NT/2000/XP, using the cmd shell.
+
+Make sure the path to the build directory does not contain spaces. The
+build usually works in this circumstance, but some tests will fail.
+
+=item Borland C++
+
+If you are using the Borland compiler, you will need dmake.
+(The make that Borland supplies is seriously crippled and will not
+work for MakeMaker builds.)
+
+See L</"Make"> above.
+
+=item Microsoft Visual C++
+
+The nmake that comes with Visual C++ will suffice for building.
+You will need to run the VCVARS32.BAT file, usually found somewhere
+like C:\MSDEV4.2\BIN. This will set your build environment.
+
+You can also use dmake to build using Visual C++; provided, however,
+you set OSRELEASE to "microsft" (or whatever the directory name
+under which the Visual C dmake configuration lives) in your environment
+and edit win32/config.vc to change "make=nmake" into "make=dmake". The
+latter step is only essential if you want to use dmake as your default
+make for building extensions using MakeMaker.
+
+=item Microsoft Platform SDK 64-bit Compiler
+
+The nmake that comes with the Platform SDK will suffice for building
+Perl. Make sure you are building within one of the "Build Environment"
+shells available after you install the Platform SDK from the Start Menu.
+
+=item MinGW release 3 with gcc
+
+The latest release of MinGW at the time of writing is 3.1.0, which comes
+with gcc-3.2.3, and can be downloaded here:
+
+ http://www.mingw.org/
+
+Perl also compiles with earlier releases of gcc (2.95.2 and up). See below
+for notes about using earlier versions of MinGW/gcc.
-Use the default "cmd" shell that comes with NT. In particular, do
-*not* use the 4DOS/NT shell. The Makefile has commands that are not
-compatible with that shell. You are mostly on your own if you can
-muster the temerity to attempt this with Windows95.
+You also need dmake. See L</"Make"> above on how to get it.
+
+=item MinGW release 1 with gcc
+
+The MinGW-1.1 bundle comes with gcc-2.95.3.
+
+Make sure you install the binaries that work with MSVCRT.DLL as indicated
+in the README for the GCC bundle. You may need to set up a few environment
+variables (usually ran from a batch file).
+
+There are a couple of problems with the version of gcc-2.95.2-msvcrt.exe
+released 7 November 1999:
+
+=over
=item *
-If you did not choose to always initialize the Visual C++ compilation
-environment variables when you installed Visual C++ on your system, you
-will need to run the VCVARS32.BAT file usually found somewhere like
-C:\MSDEV4.2\BIN. This will set your build environment.
+It left out a fix for certain command line quotes. To fix this, be sure
+to download and install the file fixes/quote-fix-msvcrt.exe from the above
+ftp location.
=item *
-Depending on how you extracted the distribution, you have to make sure
-some of the files are writable by you. The easiest way to make sure of
-this is to execute:
+The definition of the fpos_t type in stdio.h may be wrong. If your
+stdio.h has this problem, you will see an exception when running the
+test t/lib/io_xs.t. To fix this, change the typedef for fpos_t from
+"long" to "long long" in the file i386-mingw32msvc/include/stdio.h,
+and rebuild.
+
+=back
- attrib -R *.* /S
+A potentially simpler to install (but probably soon-to-be-outdated) bundle
+of the above package with the mentioned fixes already applied is available
+here:
-from the perl toplevel directory. You don't I<have> to do this if you
-used the right tools to extract the files in the standard distribution,
-but it doesn't hurt to do so.
+ http://downloads.ActiveState.com/pub/staff/gsar/gcc-2.95.2-msvcrt.zip
+ ftp://ftp.ActiveState.com/pub/staff/gsar/gcc-2.95.2-msvcrt.zip
=back
Make sure you are in the "win32" subdirectory under the perl toplevel.
This directory contains a "Makefile" that will work with
-versions of NMAKE that come with Visual C++ ver. 2.0 and above.
+versions of nmake that come with Visual C++ or the Platform SDK, and
+a dmake "makefile.mk" that will work for all supported compilers. The
+defaults in the dmake makefile are setup to build using Microsoft Visual
+C++ 6.0 or newer.
=item *
-Edit the Makefile and change the values of INST_DRV and INST_TOP
-if you want perl to be installed in a location other than "C:\PERL".
+Edit the makefile.mk (or Makefile, if you're using nmake) and change
+the values of INST_DRV and INST_TOP. You can also enable various
+build flags. These are explained in the makefiles.
+
+Note that it is generally not a good idea to try to build a perl with
+INST_DRV and INST_TOP set to a path that already exists from a previous
+build. In particular, this may cause problems with the
+lib/ExtUtils/t/Embed.t test, which attempts to build a test program and
+may end up building against the installed perl's lib/CORE directory rather
+than the one being tested.
+
+You will have to make sure that CCTYPE is set correctly and that
+CCHOME points to wherever you installed your compiler.
+
+The default value for CCHOME in the makefiles for Visual C++
+may not be correct for some versions. Make sure the default exists
+and is valid.
+
+If you have either the source or a library that contains des_fcrypt(),
+enable the appropriate option in the makefile. A ready-to-use version
+of fcrypt.c, based on the version originally written by Eric Young at
+ftp://ftp.funet.fi/pub/crypt/mirrors/dsi/libdes/, is bundled with the
+distribution. Set CRYPT_SRC to fcrypt.c to use this version.
+Alternatively, if you have built a library that contains des_fcrypt(),
+you can set CRYPT_LIB to point to the library name.
+Perl will also build without des_fcrypt(), but the crypt() builtin will
+fail at run time.
+
+Be sure to read the instructions near the top of the makefiles carefully.
=item *
-If you are using Visual C++ ver. 4.0 and above: type "nmake".
-If you are using a Visual C++ ver. 2.0: type "nmake CCTYPE=MSVC20".
+Type "dmake" (or "nmake" if you are using that make).
This should build everything. Specifically, it will create perl.exe,
-perl.dll, and perlglob.exe at the perl toplevel, and various other
-extension dll's under the lib\auto directory. If the build fails for
-any reason, make sure you have done the previous steps correctly.
+perl59.dll at the perl toplevel, and various other extension dll's
+under the lib\auto directory. If the build fails for any reason, make
+sure you have done the previous steps correctly.
=back
-=head2 Testing
+=head2 Testing Perl on Win32
+
+Type "dmake test" (or "nmake test"). This will run most of the tests from
+the testsuite (many tests will be skipped).
+
+There should be no test failures when running under Windows NT/2000/XP.
+Many tests I<will> fail under Windows 9x due to the inferior command shell.
+
+Some test failures may occur if you use a command shell other than the
+native "cmd.exe", or if you are building from a path that contains
+spaces. So don't do that.
-Type "nmake test". This will run most of the tests from the
-testsuite (many tests will be skipped, and but no test should fail).
+If you are running the tests from a emacs shell window, you may see
+failures in op/stat.t. Run "dmake test-notty" in that case.
-If some tests do fail, it may be because you are using a different command
-shell than the native "cmd.exe".
+If you're using the Borland compiler, you may see a failure in op/taint.t
+arising from the inability to find the Borland Runtime DLLs on the system
+default path. You will need to copy the DLLs reported by the messages
+from where Borland chose to install it, into the Windows system directory
+(usually somewhere like C:\WINNT\SYSTEM32) and rerun the test.
-Please report any failures as described under L<BUGS AND CAVEATS>.
+If you're using Borland compiler versions 5.2 and below, you may run into
+problems finding the correct header files when building extensions. For
+example, building the "Tk" extension may fail because both perl and Tk
+contain a header file called "patchlevel.h". The latest Borland compiler
+(v5.5) is free of this misbehaviour, and it even supports an
+option -VI- for backward (bugward) compatibility for using the old Borland
+search algorithm to locate header files.
-=head2 Installation
+If you run the tests on a FAT partition, you may see some failures for
+C<link()> related tests (I<op/write.t>, I<op/stat.t> ...). Testing on
+NTFS avoids these errors.
-Type "nmake install". This will put the newly built perl and the
-libraries under "C:\perl" (actually whatever you set C<INST_TOP> to
-in the Makefile). It will also install the pod documentation under
-C<$INST_TOP\lib\pod> and HTML versions of the same under
-C<$INST_TOP\lib\pod\html>. To use the Perl you just installed, set your
-PATH environment variable to "C:\perl\bin" (or C<$INST_TOP\bin>, if you
-changed the default as above).
+Furthermore, you should make sure that during C<make test> you do not
+have any GNU tool packages in your path: some toolkits like Unixutils
+include some tools (C<type> for instance) which override the Windows
+ones and makes tests fail. Remove them from your path while testing to
+avoid these errors.
-=head2 Usage Hints
+Please report any other failures as described under L<BUGS AND CAVEATS>.
+
+=head2 Installation of Perl on Win32
+
+Type "dmake install" (or "nmake install"). This will put the newly
+built perl and the libraries under whatever C<INST_TOP> points to in the
+Makefile. It will also install the pod documentation under
+C<$INST_TOP\$VERSION\lib\pod> and HTML versions of the same under
+C<$INST_TOP\$VERSION\lib\pod\html>. To use the Perl you just installed,
+you will need to add two components to your PATH environment variable,
+C<$INST_TOP\$VERSION\bin> and C<$INST_TOP\$VERSION\bin\$ARCHNAME>.
+For example:
+
+ set PATH c:\perl\5.6.0\bin;c:\perl\5.6.0\bin\MSWin32-x86;%PATH%
+
+If you opt to comment out INST_VER and INST_ARCH in the makefiles, the
+installation structure is much simpler. In that case, it will be
+sufficient to add a single entry to the path, for instance:
+
+ set PATH c:\perl\bin;%PATH%
+
+=head2 Usage Hints for Perl on Win32
=over 4
If you put extensions in unusual places, you can set PERL5LIB
to a list of paths separated by semicolons where you want perl
to look for libraries. Look for descriptions of other environment
-variables you can set in the perlrun podpage.
+variables you can set in L<perlrun>.
+
+You can also control the shell that perl uses to run system() and
+backtick commands via PERL5SHELL. See L<perlrun>.
+
+Perl does not depend on the registry, but it can look up certain default
+values if you choose to put them there. Perl attempts to read entries from
+C<HKEY_CURRENT_USER\Software\Perl> and C<HKEY_LOCAL_MACHINE\Software\Perl>.
+Entries in the former override entries in the latter. One or more of the
+following entries (of type REG_SZ or REG_EXPAND_SZ) may be set:
-Sometime in the future, some of the configuration information
-for perl will be moved into the Windows registry.
+ lib-$] version-specific standard library path to add to @INC
+ lib standard library path to add to @INC
+ sitelib-$] version-specific site library path to add to @INC
+ sitelib site library path to add to @INC
+ vendorlib-$] version-specific vendor library path to add to @INC
+ vendorlib vendor library path to add to @INC
+ PERL* fallback for all %ENV lookups that begin with "PERL"
+
+Note the C<$]> in the above is not literal. Substitute whatever version
+of perl you want to honor that entry, e.g. C<5.6.0>. Paths must be
+separated with semicolons, as usual on win32.
+
+=item File Globbing
+
+By default, perl handles file globbing using the File::Glob extension,
+which provides portable globbing.
+
+If you want perl to use globbing that emulates the quirks of DOS
+filename conventions, you might want to consider using File::DosGlob
+to override the internal glob() implementation. See L<File::DosGlob> for
+details.
=item Using perl from the command line
If you are accustomed to using perl from various command-line
shells found in UNIX environments, you will be less than pleased
-with what Windows NT offers by way of a command shell.
-
-The crucial thing to understand about the "cmd" shell (which is
-the default on Windows NT) is that it does not do any wildcard
-expansions of command-line arguments (so wildcards need not be
-quoted). It also provides only rudimentary quoting. The only
-(useful) quote character is the double quote ("). It can be used to
-protect spaces in arguments and other special characters. The
-Windows NT documentation has almost no description of how the
+with what Windows offers by way of a command shell.
+
+The crucial thing to understand about the Windows environment is that
+the command line you type in is processed twice before Perl sees it.
+First, your command shell (usually CMD.EXE on Windows NT, and
+COMMAND.COM on Windows 9x) preprocesses the command line, to handle
+redirection, environment variable expansion, and location of the
+executable to run. Then, the perl executable splits the remaining
+command line into individual arguments, using the C runtime library
+upon which Perl was built.
+
+It is particularly important to note that neither the shell nor the C
+runtime do any wildcard expansions of command-line arguments (so
+wildcards need not be quoted). Also, the quoting behaviours of the
+shell and the C runtime are rudimentary at best (and may, if you are
+using a non-standard shell, be inconsistent). The only (useful) quote
+character is the double quote ("). It can be used to protect spaces
+and other special characters in arguments.
+
+The Windows NT documentation has almost no description of how the
quoting rules are implemented, but here are some general observations
-based on experiments: The shell breaks arguments at spaces and
-passes them to programs in argc/argv. Doublequotes can be used
-to prevent arguments with spaces in them from being split up.
-You can put a double quote in an argument by escaping it with
-a backslash and enclosing the whole argument within double quotes.
-The backslash and the pair of double quotes surrounding the
-argument will be stripped by the shell.
-
-The file redirection characters "<", ">", and "|" cannot be quoted
-by double quotes (there are probably more such). Single quotes
-will protect those three file redirection characters, but the
-single quotes don't get stripped by the shell (just to make this
-type of quoting completely useless). The caret "^" has also
-been observed to behave as a quoting character (and doesn't get
-stripped by the shell also).
+based on experiments: The C runtime breaks arguments at spaces and
+passes them to programs in argc/argv. Double quotes can be used to
+prevent arguments with spaces in them from being split up. You can
+put a double quote in an argument by escaping it with a backslash and
+enclosing the whole argument within double quotes. The backslash and
+the pair of double quotes surrounding the argument will be stripped by
+the C runtime.
+
+The file redirection characters "<", ">", and "|" can be quoted by
+double quotes (although there are suggestions that this may not always
+be true). Single quotes are not treated as quotes by the shell or
+the C runtime, they don't get stripped by the shell (just to make
+this type of quoting completely useless). The caret "^" has also
+been observed to behave as a quoting character, but this appears
+to be a shell feature, and the caret is not stripped from the command
+line, so Perl still sees it (and the C runtime phase does not treat
+the caret as a quote character).
Here are some examples of usage of the "cmd" shell:
perl -e "print 'foo'; print STDERR 'bar'" 1> blurch
-This prints "foo" and writes "bar" to the file "blurch":
-
- perl -e "print 'foo'; print STDERR 'bar'" 2> blurch
-
This pipes "foo" to the "less" pager and prints "bar" on the console:
perl -e "print 'foo'; print STDERR 'bar'" | less
This pipes "foo\nbar\n" to the less pager:
- perl -le "print 'foo'; print STDERR 'bar'" |& less
-
-This does the same thing as the above:
-
perl -le "print 'foo'; print STDERR 'bar'" 2>&1 | less
This pipes "foo" to the pager and writes "bar" in the file "blurch":
perl -e "print 'foo'; print STDERR 'bar'" 2> blurch | less
-Discovering the usage of the "command.com" shell on Windows 95
+Discovering the usefulness of the "command.com" shell on Windows 9x
is left as an exercise to the reader :)
+One particularly pernicious problem with the 4NT command shell for
+Windows NT is that it (nearly) always treats a % character as indicating
+that environment variable expansion is needed. Under this shell, it is
+therefore important to always double any % characters which you want
+Perl to see (for example, for hash variables), even when they are
+quoted.
+
=item Building Extensions
The Comprehensive Perl Archive Network (CPAN) offers a wealth
of extensions, some of which require a C compiler to build.
-Look in http://www.perl.com/ for more information on CPAN.
+Look in http://www.cpan.org/ for more information on CPAN.
+
+Note that not all of the extensions available from CPAN may work
+in the Win32 environment; you should check the information at
+http://testers.cpan.org/ before investing too much effort into
+porting modules that don't readily build.
Most extensions (whether they require a C compiler or not) can
be built, tested and installed with the standard mantra:
perl Makefile.PL
- nmake
- nmake test
- nmake install
+ $MAKE
+ $MAKE test
+ $MAKE install
-Note the NMAKE that comes with Visual C++ is required. Some
-extensions may not provide a testsuite (so "nmake test"
-may not do anything, or fail), but most serious ones do.
+where $MAKE is whatever 'make' program you have configured perl to
+use. Use "perl -V:make" to find out what this is. Some extensions
+may not provide a testsuite (so "$MAKE test" may not do anything or
+fail), but most serious ones do.
-If a module implements XSUBs, you will need a C compiler (Visual C++
-versions 2.0 and above are currently supported). You must make sure
-you have set up the environment for the compiler for command-line
-compilation.
+It is important that you use a supported 'make' program, and
+ensure Config.pm knows about it. If you don't have nmake, you can
+either get dmake from the location mentioned earlier or get an
+old version of nmake reportedly available from:
-If a module does not build for some reason, carefully look at
-why it failed, and report problems to the module author. If
-it looks like the extension building support is at fault, report
-that with full details of how the build failed using the perlbug
-utility.
+ http://download.microsoft.com/download/vc15/Patch/1.52/W95/EN-US/nmake15.exe
-=item Miscellaneous Things
+Another option is to use the make written in Perl, available from
+CPAN.
-A full set of HTML documentation is installed, so you should be
-able to use it if you have a web browser installed on your
-system.
+ http://www.cpan.org/modules/by-module/Make/
-C<perldoc> is also a useful tool for browsing information contained
-in the documentation, especially in conjunction with a pager
-like C<less> (recent versions of which have Win32 support). You may
-have to set the PAGER environment variable to use a specific pager.
-"perldoc -f foo" will print information about the perl operator
-"foo".
+You may also use dmake. See L</"Make"> above on how to get it.
-If you find bugs in perl, you can run C<perlbug> to create a
-bug report (you may have to send it manually if C<perlbug> cannot
-find a mailer on your system).
+Note that MakeMaker actually emits makefiles with different syntax
+depending on what 'make' it thinks you are using. Therefore, it is
+important that one of the following values appears in Config.pm:
-=back
+ make='nmake' # MakeMaker emits nmake syntax
+ make='dmake' # MakeMaker emits dmake syntax
+ any other value # MakeMaker emits generic make syntax
+ (e.g GNU make, or Perl make)
-=head1 BUGS AND CAVEATS
+If the value doesn't match the 'make' program you want to use,
+edit Config.pm to fix it.
-This port has not been tested as extensively as we'd like, and
-therefore should be considered beta quality software. You should
-expect changes in virtually all of these areas: build process,
-installation structure, supported utilities/modules, and supported
-perl functionality. In particular, functionality specific to the
-Win32 environment may ultimately be supported as either core modules
-or extensions. This means that you should be prepared to recompile
-extensions when binary incompatibilites arise due to changes in the
-internal structure of the code.
-
-If you have had prior exposure to Perl on Unix platforms, you will notice
-this port exhibits behavior different from what is documented. Most of the
-differences fall under one of these categories. We do not consider
-any of them to be serious limitations (especially when compared to the
-limited nature of some of the Win32 OSes themselves :)
+If a module implements XSUBs, you will need one of the supported
+C compilers. You must make sure you have set up the environment for
+the compiler for command-line compilation.
-=over 8
+If a module does not build for some reason, look carefully for
+why it failed, and report problems to the module author. If
+it looks like the extension building support is at fault, report
+that with full details of how the build failed using the perlbug
+utility.
+
+=item Command-line Wildcard Expansion
+
+The default command shells on DOS descendant operating systems (such
+as they are) usually do not expand wildcard arguments supplied to
+programs. They consider it the application's job to handle that.
+This is commonly achieved by linking the application (in our case,
+perl) with startup code that the C runtime libraries usually provide.
+However, doing that results in incompatible perl versions (since the
+behavior of the argv expansion code differs depending on the
+compiler, and it is even buggy on some compilers). Besides, it may
+be a source of frustration if you use such a perl binary with an
+alternate shell that *does* expand wildcards.
+
+Instead, the following solution works rather well. The nice things
+about it are 1) you can start using it right away; 2) it is more
+powerful, because it will do the right thing with a pattern like
+*/*/*.c; 3) you can decide whether you do/don't want to use it; and
+4) you can extend the method to add any customizations (or even
+entirely different kinds of wildcard expansion).
+
+ C:\> copy con c:\perl\lib\Wild.pm
+ # Wild.pm - emulate shell @ARGV expansion on shells that don't
+ use File::DosGlob;
+ @ARGV = map {
+ my @g = File::DosGlob::glob($_) if /[*?]/;
+ @g ? @g : $_;
+ } @ARGV;
+ 1;
+ ^Z
+ C:\> set PERL5OPT=-MWild
+ C:\> perl -le "for (@ARGV) { print }" */*/perl*.c
+ p4view/perl/perl.c
+ p4view/perl/perlio.c
+ p4view/perl/perly.c
+ perl5.005/win32/perlglob.c
+ perl5.005/win32/perllib.c
+ perl5.005/win32/perlglob.c
+ perl5.005/win32/perllib.c
+ perl5.005/win32/perlglob.c
+ perl5.005/win32/perllib.c
+
+Note there are two distinct steps there: 1) You'll have to create
+Wild.pm and put it in your perl lib directory. 2) You'll need to
+set the PERL5OPT environment variable. If you want argv expansion
+to be the default, just set PERL5OPT in your default startup
+environment.
+
+If you are using the Visual C compiler, you can get the C runtime's
+command line wildcard expansion built into perl binary. The resulting
+binary will always expand unquoted command lines, which may not be
+what you want if you use a shell that does that for you. The expansion
+done is also somewhat less powerful than the approach suggested above.
+
+=item Win32 Specific Extensions
+
+A number of extensions specific to the Win32 platform are available
+from CPAN. You may find that many of these extensions are meant to
+be used under the Activeware port of Perl, which used to be the only
+native port for the Win32 platform. Since the Activeware port does not
+have adequate support for Perl's extension building tools, these
+extensions typically do not support those tools either and, therefore,
+cannot be built using the generic steps shown in the previous section.
+
+To ensure smooth transitioning of existing code that uses the
+ActiveState port, there is a bundle of Win32 extensions that contains
+all of the ActiveState extensions and most other Win32 extensions from
+CPAN in source form, along with many added bugfixes, and with MakeMaker
+support. This bundle is available at:
+
+ http://www.cpan.org/authors/id/GSAR/libwin32-0.18.zip
+
+See the README in that distribution for building and installation
+instructions. Look for later versions that may be available at the
+same location.
+
+=item Notes on 64-bit Windows
+
+Windows .NET Server supports the LLP64 data model on the Intel Itanium
+architecture.
+
+The LLP64 data model is different from the LP64 data model that is the
+norm on 64-bit Unix platforms. In the former, C<int> and C<long> are
+both 32-bit data types, while pointers are 64 bits wide. In addition,
+there is a separate 64-bit wide integral type, C<__int64>. In contrast,
+the LP64 data model that is pervasive on Unix platforms provides C<int>
+as the 32-bit type, while both the C<long> type and pointers are of
+64-bit precision. Note that both models provide for 64-bits of
+addressability.
+
+64-bit Windows running on Itanium is capable of running 32-bit x86
+binaries transparently. This means that you could use a 32-bit build
+of Perl on a 64-bit system. Given this, why would one want to build
+a 64-bit build of Perl? Here are some reasons why you would bother:
=item *
-C<stat()> and C<lstat()> functions may not behave as documented. They
-may return values that bear no resemblance to those reported on Unix
-platforms, and some fields (like the the one for inode) may be completely
-bogus.
+A 64-bit native application will run much more efficiently on
+Itanium hardware.
=item *
-The following functions are currently unavailable: C<fork()>, C<exec()>,
-C<dump()>, C<chown()>, C<link()>, C<symlink()>, C<chroot()>,
-C<setpgrp()>, C<getpgrp()>, C<setpriority()>, C<getpriority()>,
-C<syscall()>, C<fcntl()>, C<flock()>. This list is possibly very
-incomplete.
+There is no 2GB limit on process size.
=item *
-Various C<socket()> related calls are supported, but they may not
-behave as on Unix platforms.
+Perl automatically provides large file support when built under
+64-bit Windows.
=item *
-The four-argument C<select()> call is only supported on sockets.
+Embedding Perl inside a 64-bit application.
-=item *
+=back
-C<$?> ends up with the exitstatus of the subprocess (this is different
-from Unix, where the exitstatus is actually given by "$? >> 8").
-Failure to spawn() the subprocess is indicated by setting $? to
-"255<<8". This is subject to change.
+=head2 Running Perl Scripts
-=item *
+Perl scripts on UNIX use the "#!" (a.k.a "shebang") line to
+indicate to the OS that it should execute the file using perl.
+Win32 has no comparable means to indicate arbitrary files are
+executables.
-Building modules available on CPAN is mostly supported, but this
-hasn't been tested much yet. Expect strange problems, and be
-prepared to deal with the consequences.
+Instead, all available methods to execute plain text files on
+Win32 rely on the file "extension". There are three methods
+to use this to execute perl scripts:
-=item *
+=over 8
-C<utime()>, C<times()> and process-related functions may not
-behave as described in the documentation, and some of the
-returned values or effects may be bogus.
+=item 1
+
+There is a facility called "file extension associations" that will
+work in Windows NT 4.0. This can be manipulated via the two
+commands "assoc" and "ftype" that come standard with Windows NT
+4.0. Type "ftype /?" for a complete example of how to set this
+up for perl scripts (Say what? You thought Windows NT wasn't
+perl-ready? :).
+
+=item 2
+
+Since file associations don't work everywhere, and there are
+reportedly bugs with file associations where it does work, the
+old method of wrapping the perl script to make it look like a
+regular batch file to the OS, may be used. The install process
+makes available the "pl2bat.bat" script which can be used to wrap
+perl scripts into batch files. For example:
+
+ pl2bat foo.pl
+
+will create the file "FOO.BAT". Note "pl2bat" strips any
+.pl suffix and adds a .bat suffix to the generated file.
+
+If you use the 4DOS/NT or similar command shell, note that
+"pl2bat" uses the "%*" variable in the generated batch file to
+refer to all the command line arguments, so you may need to make
+sure that construct works in batch files. As of this writing,
+4DOS/NT users will need a "ParameterChar = *" statement in their
+4NT.INI file or will need to execute "setdos /p*" in the 4DOS/NT
+startup file to enable this to work.
+
+=item 3
+
+Using "pl2bat" has a few problems: the file name gets changed,
+so scripts that rely on C<$0> to find what they must do may not
+run properly; running "pl2bat" replicates the contents of the
+original script, and so this process can be maintenance intensive
+if the originals get updated often. A different approach that
+avoids both problems is possible.
+
+A script called "runperl.bat" is available that can be copied
+to any filename (along with the .bat suffix). For example,
+if you call it "foo.bat", it will run the file "foo" when it is
+executed. Since you can run batch files on Win32 platforms simply
+by typing the name (without the extension), this effectively
+runs the file "foo", when you type either "foo" or "foo.bat".
+With this method, "foo.bat" can even be in a different location
+than the file "foo", as long as "foo" is available somewhere on
+the PATH. If your scripts are on a filesystem that allows symbolic
+links, you can even avoid copying "runperl.bat".
+
+Here's a diversion: copy "runperl.bat" to "runperl", and type
+"runperl". Explain the observed behavior, or lack thereof. :)
+Hint: .gnidnats llits er'uoy fi ,"lrepnur" eteled :tniH
-=item *
+=item Miscellaneous Things
-Signal handling may not behave as on Unix platforms.
+A full set of HTML documentation is installed, so you should be
+able to use it if you have a web browser installed on your
+system.
-=item *
+C<perldoc> is also a useful tool for browsing information contained
+in the documentation, especially in conjunction with a pager
+like C<less> (recent versions of which have Win32 support). You may
+have to set the PAGER environment variable to use a specific pager.
+"perldoc -f foo" will print information about the perl operator
+"foo".
-File globbing may not behave as on Unix platforms. In particular,
-globbing does not understand wildcards in the pathname component,
-but only in the filename component. In other words, something like
-"print <*/*.pl>" will not print all the perl scripts in all the
-subdirectories one level under the current one (like it does on
-UNIX platforms).
+One common mistake when using this port with a GUI library like C<Tk>
+is assuming that Perl's normal behavior of opening a command-line
+window will go away. This isn't the case. If you want to start a copy
+of C<perl> without opening a command-line window, use the C<wperl>
+executable built during the installation process. Usage is exactly
+the same as normal C<perl> on Win32, except that options like C<-h>
+don't work (since they need a command-line window to print to).
+
+If you find bugs in perl, you can run C<perlbug> to create a
+bug report (you may have to send it manually if C<perlbug> cannot
+find a mailer on your system).
=back
+=head1 BUGS AND CAVEATS
+
+Norton AntiVirus interferes with the build process, particularly if
+set to "AutoProtect, All Files, when Opened". Unlike large applications
+the perl build process opens and modifies a lot of files. Having the
+the AntiVirus scan each and every one slows build the process significantly.
+Worse, with PERLIO=stdio the build process fails with peculiar messages
+as the virus checker interacts badly with miniperl.exe writing configure
+files (it seems to either catch file part written and treat it as suspicious,
+or virus checker may have it "locked" in a way which inhibits miniperl
+updating it). The build does complete with
+
+ set PERLIO=perlio
+
+but that may be just luck. Other AntiVirus software may have similar issues.
+
+Some of the built-in functions do not act exactly as documented in
+L<perlfunc>, and a few are not implemented at all. To avoid
+surprises, particularly if you have had prior exposure to Perl
+in other operating environments or if you intend to write code
+that will be portable to other environments. See L<perlport>
+for a reasonably definitive list of these differences.
+
+Not all extensions available from CPAN may build or work properly
+in the Win32 environment. See L</"Building Extensions">.
+
+Most C<socket()> related calls are supported, but they may not
+behave as on Unix platforms. See L<perlport> for the full list.
+
+Signal handling may not behave as on Unix platforms (where it
+doesn't exactly "behave", either :). For instance, calling C<die()>
+or C<exit()> from signal handlers will cause an exception, since most
+implementations of C<signal()> on Win32 are severely crippled.
+Thus, signals may work only for simple things like setting a flag
+variable in the handler. Using signals under this port should
+currently be considered unsupported.
+
Please send detailed descriptions of any problems and solutions that
you may find to <F<perlbug@perl.com>>, along with the output produced
by C<perl -V>.
+=head1 ACKNOWLEDGEMENTS
+
+The use of a camel with the topic of Perl is a trademark
+of O'Reilly and Associates, Inc. Used with permission.
+
=head1 AUTHORS
=over 4
-=item Gary Ng <F<71564.1743@CompuServe.COM>>
+=item Gary Ng E<lt>71564.1743@CompuServe.COME<gt>
-=item Gurusamy Sarathy <F<gsar@umich.edu>>
+=item Gurusamy Sarathy E<lt>gsar@activestate.comE<gt>
-=item Nick Ing-Simmons <F<nick@ni-s.u-net.com>>
+=item Nick Ing-Simmons E<lt>nick@ing-simmons.netE<gt>
=back
+This document is maintained by Gurusamy Sarathy.
+
=head1 SEE ALSO
L<perl>
This port was originally contributed by Gary Ng around 5.003_24,
and borrowed from the Hip Communications port that was available
-at the time.
+at the time. Various people have made numerous and sundry hacks
+since then.
+
+Borland support was added in 5.004_01 (Gurusamy Sarathy).
+
+GCC/mingw32 support was added in 5.005 (Nick Ing-Simmons).
+
+Support for PERL_OBJECT was added in 5.005 (ActiveState Tool Corp).
+
+Support for fork() emulation was added in 5.6 (ActiveState Tool Corp).
+
+Win9x support was added in 5.6 (Benjamin Stuhl).
-Nick Ing-Simmons and Gurusamy Sarathy have made numerous and
-sundry hacks since then.
+Support for 64-bit Windows added in 5.8 (ActiveState Corp).
-Last updated: 13 April 1997
+Last updated: 20 April 2002
=cut
https://perl5.git.perl.org / perl5.git / blobdiff