#define PERL_IN_UTF8_C
#include "perl.h"
#include "invlist_inline.h"
+#include "uni_keywords.h"
static const char malformed_text[] = "Malformed UTF-8 character";
static const char unees[] =
"Malformed UTF-8 character (unexpected end of string)";
+
+/* Be sure to synchronize this message with the similar one in regcomp.c */
static const char cp_above_legal_max[] =
- "Use of code point 0x%" UVXf " is not allowed; "
- "the permissible max is 0x%" UVXf;
+ "Use of code point 0x%" UVXf " is not allowed; the"
+ " permissible max is 0x%" UVXf;
-#define MAX_NON_DEPRECATED_CP ((UV) (IV_MAX))
+#define MAX_EXTERNALLY_LEGAL_CP ((UV) (IV_MAX))
/*
=head1 Unicode Support
}
}
+STATIC HV *
+S_new_msg_hv(pTHX_ const char * const message, /* The message text */
+ U32 categories, /* Packed warning categories */
+ U32 flag) /* Flag associated with this message */
+{
+ /* Creates, populates, and returns an HV* that describes an error message
+ * for the translators between UTF8 and code point */
+
+ SV* msg_sv = newSVpv(message, 0);
+ SV* category_sv = newSVuv(categories);
+ SV* flag_bit_sv = newSVuv(flag);
+
+ HV* msg_hv = newHV();
+
+ PERL_ARGS_ASSERT_NEW_MSG_HV;
+
+ (void) hv_stores(msg_hv, "text", msg_sv);
+ (void) hv_stores(msg_hv, "warn_categories", category_sv);
+ (void) hv_stores(msg_hv, "flag_bit", flag_bit_sv);
+
+ return msg_hv;
+}
+
/*
=for apidoc uvoffuni_to_utf8_flags
=cut
*/
-#define HANDLE_UNICODE_SURROGATE(uv, flags) \
+U8 *
+Perl_uvoffuni_to_utf8_flags(pTHX_ U8 *d, UV uv, const UV flags)
+{
+ PERL_ARGS_ASSERT_UVOFFUNI_TO_UTF8_FLAGS;
+
+ return uvoffuni_to_utf8_flags_msgs(d, uv, flags, NULL);
+}
+
+/* All these formats take a single UV code point argument */
+const char surrogate_cp_format[] = "UTF-16 surrogate U+%04" UVXf;
+const char nonchar_cp_format[] = "Unicode non-character U+%04" UVXf
+ " is not recommended for open interchange";
+const char super_cp_format[] = "Code point 0x%" UVXf " is not Unicode,"
+ " may not be portable";
+const char perl_extended_cp_format[] = "Code point 0x%" UVXf " is not" \
+ " Unicode, requires a Perl extension," \
+ " and so is not portable";
+
+#define HANDLE_UNICODE_SURROGATE(uv, flags, msgs) \
STMT_START { \
if (flags & UNICODE_WARN_SURROGATE) { \
- Perl_ck_warner_d(aTHX_ packWARN(WARN_SURROGATE), \
- "UTF-16 surrogate U+%04" UVXf, uv); \
+ U32 category = packWARN(WARN_SURROGATE); \
+ const char * format = surrogate_cp_format; \
+ if (msgs) { \
+ *msgs = new_msg_hv(Perl_form(aTHX_ format, uv), \
+ category, \
+ UNICODE_GOT_SURROGATE); \
+ } \
+ else { \
+ Perl_ck_warner_d(aTHX_ category, format, uv); \
+ } \
} \
if (flags & UNICODE_DISALLOW_SURROGATE) { \
return NULL; \
} \
} STMT_END;
-#define HANDLE_UNICODE_NONCHAR(uv, flags) \
+#define HANDLE_UNICODE_NONCHAR(uv, flags, msgs) \
STMT_START { \
if (flags & UNICODE_WARN_NONCHAR) { \
- Perl_ck_warner_d(aTHX_ packWARN(WARN_NONCHAR), \
- "Unicode non-character U+%04" UVXf " is not " \
- "recommended for open interchange", uv); \
+ U32 category = packWARN(WARN_NONCHAR); \
+ const char * format = nonchar_cp_format; \
+ if (msgs) { \
+ *msgs = new_msg_hv(Perl_form(aTHX_ format, uv), \
+ category, \
+ UNICODE_GOT_NONCHAR); \
+ } \
+ else { \
+ Perl_ck_warner_d(aTHX_ category, format, uv); \
+ } \
} \
if (flags & UNICODE_DISALLOW_NONCHAR) { \
return NULL; \
#define MARK UTF_CONTINUATION_MARK
#define MASK UTF_CONTINUATION_MASK
+/*
+=for apidoc uvchr_to_utf8_flags_msgs
+
+THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES.
+
+Most code should use C<L</uvchr_to_utf8_flags>()> rather than call this directly.
+
+This function is for code that wants any warning and/or error messages to be
+returned to the caller rather than be displayed. All messages that would have
+been displayed if all lexical warnings are enabled will be returned.
+
+It is just like C<L</uvchr_to_utf8_flags>> but it takes an extra parameter
+placed after all the others, C<msgs>. If this parameter is 0, this function
+behaves identically to C<L</uvchr_to_utf8_flags>>. Otherwise, C<msgs> should
+be a pointer to an C<HV *> variable, in which this function creates a new HV to
+contain any appropriate messages. The hash has three key-value pairs, as
+follows:
+
+=over 4
+
+=item C<text>
+
+The text of the message as a C<SVpv>.
+
+=item C<warn_categories>
+
+The warning category (or categories) packed into a C<SVuv>.
+
+=item C<flag>
+
+A single flag bit associated with this message, in a C<SVuv>.
+The bit corresponds to some bit in the C<*errors> return value,
+such as C<UNICODE_GOT_SURROGATE>.
+
+=back
+
+It's important to note that specifying this parameter as non-null will cause
+any warnings this function would otherwise generate to be suppressed, and
+instead be placed in C<*msgs>. The caller can check the lexical warnings state
+(or not) when choosing what to do with the returned messages.
+
+The caller, of course, is responsible for freeing any returned HV.
+
+=cut
+*/
+
+/* Undocumented; we don't want people using this. Instead they should use
+ * uvchr_to_utf8_flags_msgs() */
U8 *
-Perl_uvoffuni_to_utf8_flags(pTHX_ U8 *d, UV uv, const UV flags)
+Perl_uvoffuni_to_utf8_flags_msgs(pTHX_ U8 *d, UV uv, const UV flags, HV** msgs)
{
- PERL_ARGS_ASSERT_UVOFFUNI_TO_UTF8_FLAGS;
+ PERL_ARGS_ASSERT_UVOFFUNI_TO_UTF8_FLAGS_MSGS;
+
+ if (msgs) {
+ *msgs = NULL;
+ }
if (OFFUNI_IS_INVARIANT(uv)) {
*d++ = LATIN1_TO_NATIVE(uv);
if (UNLIKELY( UNICODE_IS_32_CONTIGUOUS_NONCHARS(uv)
|| UNICODE_IS_END_PLANE_NONCHAR_GIVEN_NOT_SUPER(uv)))
{
- HANDLE_UNICODE_NONCHAR(uv, flags);
+ HANDLE_UNICODE_NONCHAR(uv, flags, msgs);
}
else if (UNLIKELY(UNICODE_IS_SURROGATE(uv))) {
- HANDLE_UNICODE_SURROGATE(uv, flags);
+ HANDLE_UNICODE_SURROGATE(uv, flags, msgs);
}
}
#endif
* performance hit on these high EBCDIC code points. */
if (UNLIKELY(UNICODE_IS_SUPER(uv))) {
- if (UNLIKELY(uv > MAX_NON_DEPRECATED_CP)) {
- Perl_croak(aTHX_ cp_above_legal_max, uv, MAX_NON_DEPRECATED_CP);
+ if (UNLIKELY(uv > MAX_EXTERNALLY_LEGAL_CP)) {
+ Perl_croak(aTHX_ cp_above_legal_max, uv, MAX_EXTERNALLY_LEGAL_CP);
}
- if ( (flags & UNICODE_WARN_SUPER)
- || ( UNICODE_IS_ABOVE_31_BIT(uv)
- && (flags & UNICODE_WARN_ABOVE_31_BIT)))
+ if ( (flags & UNICODE_WARN_SUPER)
+ || ( (flags & UNICODE_WARN_PERL_EXTENDED)
+ && UNICODE_IS_PERL_EXTENDED(uv)))
{
- Perl_ck_warner_d(aTHX_ packWARN(WARN_NON_UNICODE),
+ const char * format = super_cp_format;
+ U32 category = packWARN(WARN_NON_UNICODE);
+ U32 flag = UNICODE_GOT_SUPER;
+
+ /* Choose the more dire applicable warning */
+ if (UNICODE_IS_PERL_EXTENDED(uv)) {
+ format = perl_extended_cp_format;
+ if (flags & (UNICODE_WARN_PERL_EXTENDED
+ |UNICODE_DISALLOW_PERL_EXTENDED))
+ {
+ flag = UNICODE_GOT_PERL_EXTENDED;
+ }
+ }
- /* Choose the more dire applicable warning */
- (UNICODE_IS_ABOVE_31_BIT(uv))
- ? "Code point 0x%" UVXf " is not Unicode, and not portable"
- : "Code point 0x%" UVXf " is not Unicode, may not be portable",
- uv);
+ if (msgs) {
+ *msgs = new_msg_hv(Perl_form(aTHX_ format, uv),
+ category, flag);
+ }
+ else {
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_NON_UNICODE), format, uv);
+ }
}
- if (flags & UNICODE_DISALLOW_SUPER
- || ( UNICODE_IS_ABOVE_31_BIT(uv)
- && (flags & UNICODE_DISALLOW_ABOVE_31_BIT)))
+ if ( (flags & UNICODE_DISALLOW_SUPER)
+ || ( (flags & UNICODE_DISALLOW_PERL_EXTENDED)
+ && UNICODE_IS_PERL_EXTENDED(uv)))
{
return NULL;
}
}
else if (UNLIKELY(UNICODE_IS_END_PLANE_NONCHAR_GIVEN_NOT_SUPER(uv))) {
- HANDLE_UNICODE_NONCHAR(uv, flags);
+ HANDLE_UNICODE_NONCHAR(uv, flags, msgs);
}
/* Test for and handle 4-byte result. In the test immediately below, the
characters. The end-plane non-characters for EBCDIC were
handled just above */
if (UNLIKELY(UNICODE_IS_32_CONTIGUOUS_NONCHARS(uv))) {
- HANDLE_UNICODE_NONCHAR(uv, flags);
+ HANDLE_UNICODE_NONCHAR(uv, flags, msgs);
}
else if (UNLIKELY(UNICODE_IS_SURROGATE(uv))) {
- HANDLE_UNICODE_SURROGATE(uv, flags);
+ HANDLE_UNICODE_SURROGATE(uv, flags, msgs);
}
#endif
STRLEN len = OFFUNISKIP(uv);
U8 *p = d+len-1;
while (p > d) {
- *p-- = I8_TO_NATIVE_UTF8((uv & UTF_CONTINUATION_MASK) | UTF_CONTINUATION_MARK);
- uv >>= UTF_ACCUMULATION_SHIFT;
+ *p-- = I8_TO_NATIVE_UTF8((uv & MASK) | MARK);
+ uv >>= SHIFT;
}
*p = I8_TO_NATIVE_UTF8((uv & UTF_START_MASK(len)) | UTF_START_MARK(len));
return d+len;
*(d++) = uv;
-This function accepts any UV as input, but very high code points (above
-C<IV_MAX> on the platform) will raise a deprecation warning. This is
-typically 0x7FFF_FFFF in a 32-bit word.
+This function accepts any code point from 0..C<IV_MAX> as input.
+C<IV_MAX> is typically 0x7FFF_FFFF in a 32-bit word.
It is possible to forbid or warn on non-Unicode code points, or those that may
be problematic by using L</uvchr_to_utf8_flags>.
*(d++) = uv;
-If C<flags> is 0, this function accepts any UV as input, but very high code
-points (above C<IV_MAX> for the platform) will raise a deprecation warning.
-This is typically 0x7FFF_FFFF in a 32-bit word.
+If C<flags> is 0, this function accepts any code point from 0..C<IV_MAX> as
+input. C<IV_MAX> is typically 0x7FFF_FFFF in a 32-bit word.
Specifying C<flags> can further restrict what is allowed and not warned on, as
follows:
L<Unicode Corrigendum #9|http://www.unicode.org/versions/corrigendum9.html>.
See L<perlunicode/Noncharacter code points>.
-Code points above 0x7FFF_FFFF (2**31 - 1) were never specified in any standard,
-so using them is more problematic than other above-Unicode code points. Perl
-invented an extension to UTF-8 to represent the ones above 2**36-1, so it is
-likely that non-Perl languages will not be able to read files that contain
-these that written by the perl interpreter; nor would Perl understand files
-written by something that uses a different extension. For these reasons, there
-is a separate set of flags that can warn and/or disallow these extremely high
-code points, even if other above-Unicode ones are accepted. These are the
-C<UNICODE_WARN_ABOVE_31_BIT> and C<UNICODE_DISALLOW_ABOVE_31_BIT> flags. These
-are entirely independent from the deprecation warning for code points above
-C<IV_MAX>. On 32-bit machines, it will eventually be forbidden to have any
-code point that needs more than 31 bits to represent. When that happens,
-effectively the C<UNICODE_DISALLOW_ABOVE_31_BIT> flag will always be set on
-32-bit machines. (Of course C<UNICODE_DISALLOW_SUPER> will treat all
-above-Unicode code points, including these, as malformations; and
-C<UNICODE_WARN_SUPER> warns on these.)
-
-On EBCDIC platforms starting in Perl v5.24, the Perl extension for representing
-extremely high code points kicks in at 0x3FFF_FFFF (2**30 -1), which is lower
-than on ASCII. Prior to that, code points 2**31 and higher were simply
-unrepresentable, and a different, incompatible method was used to represent
-code points between 2**30 and 2**31 - 1. The flags C<UNICODE_WARN_ABOVE_31_BIT>
-and C<UNICODE_DISALLOW_ABOVE_31_BIT> have the same function as on ASCII
-platforms, warning and disallowing 2**31 and higher.
+Extremely high code points were never specified in any standard, and require an
+extension to UTF-8 to express, which Perl does. It is likely that programs
+written in something other than Perl would not be able to read files that
+contain these; nor would Perl understand files written by something that uses a
+different extension. For these reasons, there is a separate set of flags that
+can warn and/or disallow these extremely high code points, even if other
+above-Unicode ones are accepted. They are the C<UNICODE_WARN_PERL_EXTENDED>
+and C<UNICODE_DISALLOW_PERL_EXTENDED> flags. For more information see
+L</C<UTF8_GOT_PERL_EXTENDED>>. Of course C<UNICODE_DISALLOW_SUPER> will
+treat all above-Unicode code points, including these, as malformations. (Note
+that the Unicode standard considers anything above 0x10FFFF to be illegal, but
+there are standards predating it that allow up to 0x7FFF_FFFF (2**31 -1))
+
+A somewhat misleadingly named synonym for C<UNICODE_WARN_PERL_EXTENDED> is
+retained for backward compatibility: C<UNICODE_WARN_ABOVE_31_BIT>. Similarly,
+C<UNICODE_DISALLOW_ABOVE_31_BIT> is usable instead of the more accurately named
+C<UNICODE_DISALLOW_PERL_EXTENDED>. The names are misleading because on EBCDIC
+platforms,these flags can apply to code points that actually do fit in 31 bits.
+The new names accurately describe the situation in all cases.
=cut
*/
return uvchr_to_utf8_flags(d, uv, flags);
}
-PERL_STATIC_INLINE bool
-S_is_utf8_cp_above_31_bits(const U8 * const s, const U8 * const e)
+#ifndef UV_IS_QUAD
+
+STATIC int
+S_is_utf8_cp_above_31_bits(const U8 * const s,
+ const U8 * const e,
+ const bool consider_overlongs)
{
/* Returns TRUE if the first code point represented by the Perl-extended-
* UTF-8-encoded string starting at 's', and looking no further than 'e -
* the final ones necessary for the complete representation may be beyond
* 'e - 1'.
*
- * The function assumes that the sequence is well-formed UTF-8 as far as it
- * goes, and is for a UTF-8 variant code point. If the sequence is
- * incomplete, the function returns FALSE if there is any well-formed
- * UTF-8 byte sequence that can complete it in such a way that a code point
- * < 2**31 is produced; otherwise it returns TRUE.
+ * The function also can handle the case where the input is an overlong
+ * sequence. If 'consider_overlongs' is 0, the function assumes the
+ * input is not overlong, without checking, and will return based on that
+ * assumption. If this parameter is 1, the function will go to the trouble
+ * of figuring out if it actually evaluates to above or below 31 bits.
*
- * Getting this exactly right is slightly tricky, and has to be done in
- * several places in this file, so is centralized here. It is based on the
- * following table:
- *
- * U+7FFFFFFF (2 ** 31 - 1)
- * ASCII: \xFD\xBF\xBF\xBF\xBF\xBF
- * IBM-1047: \xFE\x41\x41\x41\x41\x41\x41\x42\x73\x73\x73\x73\x73\x73
- * IBM-037: \xFE\x41\x41\x41\x41\x41\x41\x42\x72\x72\x72\x72\x72\x72
- * POSIX-BC: \xFE\x41\x41\x41\x41\x41\x41\x42\x75\x75\x75\x75\x75\x75
- * I8: \xFF\xA0\xA0\xA0\xA0\xA0\xA0\xA1\xBF\xBF\xBF\xBF\xBF\xBF
- * U+80000000 (2 ** 31):
- * ASCII: \xFE\x82\x80\x80\x80\x80\x80
- * [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] 10 11 12 13
- * IBM-1047: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
- * IBM-037: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
- * POSIX-BC: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
- * I8: \xFF\xA0\xA0\xA0\xA0\xA0\xA0\xA2\xA0\xA0\xA0\xA0\xA0\xA0
+ * The sequence is otherwise assumed to be well-formed, without checking.
*/
-#ifdef EBCDIC
-
- /* [0] is start byte [1] [2] [3] [4] [5] [6] [7] */
- const U8 prefix[] = "\x41\x41\x41\x41\x41\x41\x42";
- const STRLEN prefix_len = sizeof(prefix) - 1;
const STRLEN len = e - s;
- const STRLEN cmp_len = MIN(prefix_len, len - 1);
-
-#else
+ int is_overlong;
- PERL_UNUSED_ARG(e);
+ PERL_ARGS_ASSERT_IS_UTF8_CP_ABOVE_31_BITS;
-#endif
+ assert(! UTF8_IS_INVARIANT(*s) && e > s);
- PERL_ARGS_ASSERT_IS_UTF8_CP_ABOVE_31_BITS;
+#ifdef EBCDIC
- assert(! UTF8_IS_INVARIANT(*s));
+ PERL_UNUSED_ARG(consider_overlongs);
-#ifndef EBCDIC
+ /* On the EBCDIC code pages we handle, only the native start byte 0xFE can
+ * mean a 32-bit or larger code point (0xFF is an invariant). 0xFE can
+ * also be the start byte for a 31-bit code point; we need at least 2
+ * bytes, and maybe up through 8 bytes, to determine that. (It can also be
+ * the start byte for an overlong sequence, but for 30-bit or smaller code
+ * points, so we don't have to worry about overlongs on EBCDIC.) */
+ if (*s != 0xFE) {
+ return 0;
+ }
- /* Technically, a start byte of FE can be for a code point that fits into
- * 31 bytes, but not for well-formed UTF-8: doing that requires an overlong
- * malformation. */
- return (*s >= 0xFE);
+ if (len == 1) {
+ return -1;
+ }
#else
- /* On the EBCDIC code pages we handle, only 0xFE can mean a 32-bit or
- * larger code point (0xFF is an invariant). For 0xFE, we need at least 2
- * bytes, and maybe up through 8 bytes, to be sure if the value is above 31
- * bits. */
- if (*s != 0xFE || len == 1) {
- return FALSE;
+ /* On ASCII, FE and FF are the only start bytes that can evaluate to
+ * needing more than 31 bits. */
+ if (LIKELY(*s < 0xFE)) {
+ return 0;
}
- /* Note that in UTF-EBCDIC, the two lowest possible continuation bytes are
- * \x41 and \x42. */
- return cBOOL(memGT(s + 1, prefix, cmp_len));
+ /* What we have left are FE and FF. Both of these require more than 31
+ * bits unless they are for overlongs. */
+ if (! consider_overlongs) {
+ return 1;
+ }
-#endif
+ /* Here, we have FE or FF. If the input isn't overlong, it evaluates to
+ * above 31 bits. But we need more than one byte to discern this, so if
+ * passed just the start byte, it could be an overlong evaluating to
+ * smaller */
+ if (len == 1) {
+ return -1;
+ }
-}
+ /* Having excluded len==1, and knowing that FE and FF are both valid start
+ * bytes, we can call the function below to see if the sequence is
+ * overlong. (We don't need the full generality of the called function,
+ * but for these huge code points, speed shouldn't be a consideration, and
+ * the compiler does have enough information, since it's static to this
+ * file, to optimize to just the needed parts.) */
+ is_overlong = is_utf8_overlong_given_start_byte_ok(s, len);
-PERL_STATIC_INLINE bool
-S_does_utf8_overflow(const U8 * const s, const U8 * e)
-{
- const U8 *x;
- const U8 * y = (const U8 *) HIGHEST_REPRESENTABLE_UTF8;
+ /* If it isn't overlong, more than 31 bits are required. */
+ if (is_overlong == 0) {
+ return 1;
+ }
-#if ! defined(UV_IS_QUAD) && ! defined(EBCDIC)
+ /* If it is indeterminate if it is overlong, return that */
+ if (is_overlong < 0) {
+ return -1;
+ }
- const STRLEN len = e - s;
+ /* Here is overlong. Such a sequence starting with FE is below 31 bits, as
+ * the max it can be is 2**31 - 1 */
+ if (*s == 0xFE) {
+ return 0;
+ }
#endif
- /* Returns a boolean as to if this UTF-8 string would overflow a UV on this
- * platform, that is if it represents a code point larger than the highest
- * representable code point. (For ASCII platforms, we could use memcmp()
- * because we don't have to convert each byte to I8, but it's very rare
- * input indeed that would approach overflow, so the loop below will likely
- * only get executed once.
- *
- * 'e' must not be beyond a full character. If it is less than a full
- * character, the function returns FALSE if there is any input beyond 'e'
- * that could result in a non-overflowing code point */
+ /* Here, ASCII and EBCDIC rejoin:
+ * On ASCII: We have an overlong sequence starting with FF
+ * On EBCDIC: We have a sequence starting with FE. */
- PERL_ARGS_ASSERT_DOES_UTF8_OVERFLOW;
- assert(s <= e && s + UTF8SKIP(s) >= e);
+ { /* For C89, use a block so the declaration can be close to its use */
-#if ! defined(UV_IS_QUAD) && ! defined(EBCDIC)
+#ifdef EBCDIC
- /* On 32 bit ASCII machines, many overlongs that start with FF don't
- * overflow */
+ /* U+7FFFFFFF (2 ** 31 - 1)
+ * [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] 10 11 12 13
+ * IBM-1047: \xFE\x41\x41\x41\x41\x41\x41\x42\x73\x73\x73\x73\x73\x73
+ * IBM-037: \xFE\x41\x41\x41\x41\x41\x41\x42\x72\x72\x72\x72\x72\x72
+ * POSIX-BC: \xFE\x41\x41\x41\x41\x41\x41\x42\x75\x75\x75\x75\x75\x75
+ * I8: \xFF\xA0\xA0\xA0\xA0\xA0\xA0\xA1\xBF\xBF\xBF\xBF\xBF\xBF
+ * U+80000000 (2 ** 31):
+ * IBM-1047: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
+ * IBM-037: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
+ * POSIX-BC: \xFE\x41\x41\x41\x41\x41\x41\x43\x41\x41\x41\x41\x41\x41
+ * I8: \xFF\xA0\xA0\xA0\xA0\xA0\xA0\xA2\xA0\xA0\xA0\xA0\xA0\xA0
+ *
+ * and since we know that *s = \xfe, any continuation sequcence
+ * following it that is gt the below is above 31 bits
+ [0] [1] [2] [3] [4] [5] [6] */
+ const U8 conts_for_highest_30_bit[] = "\x41\x41\x41\x41\x41\x41\x42";
- if (isFF_OVERLONG(s, len)) {
- const U8 max_32_bit_overlong[] = "\xFF\x80\x80\x80\x80\x80\x80\x84";
- return memGE(s, max_32_bit_overlong,
- MIN(len, sizeof(max_32_bit_overlong) - 1));
- }
+#else
-#endif
+ /* FF overlong for U+7FFFFFFF (2 ** 31 - 1)
+ * ASCII: \xFF\x80\x80\x80\x80\x80\x80\x81\xBF\xBF\xBF\xBF\xBF
+ * FF overlong for U+80000000 (2 ** 31):
+ * ASCII: \xFF\x80\x80\x80\x80\x80\x80\x82\x80\x80\x80\x80\x80
+ * and since we know that *s = \xff, any continuation sequcence
+ * following it that is gt the below is above 30 bits
+ [0] [1] [2] [3] [4] [5] [6] */
+ const U8 conts_for_highest_30_bit[] = "\x80\x80\x80\x80\x80\x80\x81";
- for (x = s; x < e; x++, y++) {
- /* If this byte is larger than the corresponding highest UTF-8 byte, it
- * overflows */
- if (UNLIKELY(NATIVE_UTF8_TO_I8(*x) > *y)) {
- return TRUE;
+#endif
+ const STRLEN conts_len = sizeof(conts_for_highest_30_bit) - 1;
+ const STRLEN cmp_len = MIN(conts_len, len - 1);
+
+ /* Now compare the continuation bytes in s with the ones we have
+ * compiled in that are for the largest 30 bit code point. If we have
+ * enough bytes available to determine the answer, or the bytes we do
+ * have differ from them, we can compare the two to get a definitive
+ * answer (Note that in UTF-EBCDIC, the two lowest possible
+ * continuation bytes are \x41 and \x42.) */
+ if (cmp_len >= conts_len || memNE(s + 1,
+ conts_for_highest_30_bit,
+ cmp_len))
+ {
+ return cBOOL(memGT(s + 1, conts_for_highest_30_bit, cmp_len));
}
- /* If not the same as this byte, it must be smaller, doesn't overflow */
- if (LIKELY(NATIVE_UTF8_TO_I8(*x) != *y)) {
- return FALSE;
- }
+ /* Here, all the bytes we have are the same as the highest 30-bit code
+ * point, but we are missing so many bytes that we can't make the
+ * determination */
+ return -1;
}
-
- /* Got to the end and all bytes are the same. If the input is a whole
- * character, it doesn't overflow. And if it is a partial character,
- * there's not enough information to tell, so assume doesn't overflow */
- return FALSE;
}
-PERL_STATIC_INLINE bool
+#endif
+
+PERL_STATIC_INLINE int
S_is_utf8_overlong_given_start_byte_ok(const U8 * const s, const STRLEN len)
{
- /* Overlongs can occur whenever the number of continuation bytes
- * changes. That means whenever the number of leading 1 bits in a start
- * byte increases from the next lower start byte. That happens for start
- * bytes C0, E0, F0, F8, FC, FE, and FF. On modern perls, the following
- * illegal start bytes have already been excluded, so don't need to be
- * tested here;
+ /* Returns an int indicating whether or not the UTF-8 sequence from 's' to
+ * 's' + 'len' - 1 is an overlong. It returns 1 if it is an overlong; 0 if
+ * it isn't, and -1 if there isn't enough information to tell. This last
+ * return value can happen if the sequence is incomplete, missing some
+ * trailing bytes that would form a complete character. If there are
+ * enough bytes to make a definitive decision, this function does so.
+ * Usually 2 bytes sufficient.
+ *
+ * Overlongs can occur whenever the number of continuation bytes changes.
+ * That means whenever the number of leading 1 bits in a start byte
+ * increases from the next lower start byte. That happens for start bytes
+ * C0, E0, F0, F8, FC, FE, and FF. On modern perls, the following illegal
+ * start bytes have already been excluded, so don't need to be tested here;
* ASCII platforms: C0, C1
* EBCDIC platforms C0, C1, C2, C3, C4, E0
- *
- * At least a second byte is required to determine if other sequences will
- * be an overlong. */
+ */
const U8 s0 = NATIVE_UTF8_TO_I8(s[0]);
const U8 s1 = NATIVE_UTF8_TO_I8(s[1]);
# else
if (s0 == 0xE0 && UNLIKELY(s1 < 0xA0)) {
- return TRUE;
+ return 1;
}
# define F0_ABOVE_OVERLONG 0x90
|| (s0 == 0xFC && UNLIKELY(s1 < FC_ABOVE_OVERLONG))
|| (s0 == 0xFE && UNLIKELY(s1 < FE_ABOVE_OVERLONG)))
{
- return TRUE;
+ return 1;
}
/* Check for the FF overlong */
return isFF_OVERLONG(s, len);
}
-PERL_STATIC_INLINE bool
+PERL_STATIC_INLINE int
S_isFF_OVERLONG(const U8 * const s, const STRLEN len)
{
+ /* Returns an int indicating whether or not the UTF-8 sequence from 's' to
+ * 'e' - 1 is an overlong beginning with \xFF. It returns 1 if it is; 0 if
+ * it isn't, and -1 if there isn't enough information to tell. This last
+ * return value can happen if the sequence is incomplete, missing some
+ * trailing bytes that would form a complete character. If there are
+ * enough bytes to make a definitive decision, this function does so. */
+
PERL_ARGS_ASSERT_ISFF_OVERLONG;
- /* Check for the FF overlong. This happens only if all these bytes match;
- * what comes after them doesn't matter. See tables in utf8.h,
+ /* To be an FF overlong, all the available bytes must match */
+ if (LIKELY(memNE(s, FF_OVERLONG_PREFIX,
+ MIN(len, sizeof(FF_OVERLONG_PREFIX) - 1))))
+ {
+ return 0;
+ }
+
+ /* To be an FF overlong sequence, all the bytes in FF_OVERLONG_PREFIX must
+ * be there; what comes after them doesn't matter. See tables in utf8.h,
* utfebcdic.h. */
+ if (len >= sizeof(FF_OVERLONG_PREFIX) - 1) {
+ return 1;
+ }
- return len >= sizeof(FF_OVERLONG_PREFIX) - 1
- && UNLIKELY(memEQ(s, FF_OVERLONG_PREFIX,
- sizeof(FF_OVERLONG_PREFIX) - 1));
+ /* The missing bytes could cause the result to go one way or the other, so
+ * the result is indeterminate */
+ return -1;
}
+#if defined(UV_IS_QUAD) /* These assume IV_MAX is 2**63-1 */
+# ifdef EBCDIC /* Actually is I8 */
+# define HIGHEST_REPRESENTABLE_UTF8 \
+ "\xFF\xA7\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF"
+# else
+# define HIGHEST_REPRESENTABLE_UTF8 \
+ "\xFF\x80\x87\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF"
+# endif
+#endif
+
+PERL_STATIC_INLINE int
+S_does_utf8_overflow(const U8 * const s,
+ const U8 * e,
+ const bool consider_overlongs)
+{
+ /* Returns an int indicating whether or not the UTF-8 sequence from 's' to
+ * 'e' - 1 would overflow an IV on this platform; that is if it represents
+ * a code point larger than the highest representable code point. It
+ * returns 1 if it does overflow; 0 if it doesn't, and -1 if there isn't
+ * enough information to tell. This last return value can happen if the
+ * sequence is incomplete, missing some trailing bytes that would form a
+ * complete character. If there are enough bytes to make a definitive
+ * decision, this function does so.
+ *
+ * If 'consider_overlongs' is TRUE, the function checks for the possibility
+ * that the sequence is an overlong that doesn't overflow. Otherwise, it
+ * assumes the sequence is not an overlong. This can give different
+ * results only on ASCII 32-bit platforms.
+ *
+ * (For ASCII platforms, we could use memcmp() because we don't have to
+ * convert each byte to I8, but it's very rare input indeed that would
+ * approach overflow, so the loop below will likely only get executed once.)
+ *
+ * 'e' - 1 must not be beyond a full character. */
+
+
+ PERL_ARGS_ASSERT_DOES_UTF8_OVERFLOW;
+ assert(s <= e && s + UTF8SKIP(s) >= e);
+
+#if ! defined(UV_IS_QUAD)
+
+ return is_utf8_cp_above_31_bits(s, e, consider_overlongs);
+
+#else
+
+ PERL_UNUSED_ARG(consider_overlongs);
+
+ {
+ const STRLEN len = e - s;
+ const U8 *x;
+ const U8 * y = (const U8 *) HIGHEST_REPRESENTABLE_UTF8;
+
+ for (x = s; x < e; x++, y++) {
+
+ if (UNLIKELY(NATIVE_UTF8_TO_I8(*x) == *y)) {
+ continue;
+ }
+
+ /* If this byte is larger than the corresponding highest UTF-8
+ * byte, the sequence overflow; otherwise the byte is less than,
+ * and so the sequence doesn't overflow */
+ return NATIVE_UTF8_TO_I8(*x) > *y;
+
+ }
+
+ /* Got to the end and all bytes are the same. If the input is a whole
+ * character, it doesn't overflow. And if it is a partial character,
+ * there's not enough information to tell */
+ if (len < sizeof(HIGHEST_REPRESENTABLE_UTF8) - 1) {
+ return -1;
+ }
+
+ return 0;
+ }
+
+#endif
+
+}
+
+#if 0
+
+/* This is the portions of the above function that deal with UV_MAX instead of
+ * IV_MAX. They are left here in case we want to combine them so that internal
+ * uses can have larger code points. The only logic difference is that the
+ * 32-bit EBCDIC platform is treate like the 64-bit, and the 32-bit ASCII has
+ * different logic.
+ */
+
+/* Anything larger than this will overflow the word if it were converted into a UV */
+#if defined(UV_IS_QUAD)
+# ifdef EBCDIC /* Actually is I8 */
+# define HIGHEST_REPRESENTABLE_UTF8 \
+ "\xFF\xAF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF"
+# else
+# define HIGHEST_REPRESENTABLE_UTF8 \
+ "\xFF\x80\x8F\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF\xBF"
+# endif
+#else /* 32-bit */
+# ifdef EBCDIC
+# define HIGHEST_REPRESENTABLE_UTF8 \
+ "\xFF\xA0\xA0\xA0\xA0\xA0\xA0\xA3\xBF\xBF\xBF\xBF\xBF\xBF"
+# else
+# define HIGHEST_REPRESENTABLE_UTF8 "\xFE\x83\xBF\xBF\xBF\xBF\xBF"
+# endif
+#endif
+
+#if ! defined(UV_IS_QUAD) && ! defined(EBCDIC)
+
+ /* On 32 bit ASCII machines, many overlongs that start with FF don't
+ * overflow */
+ if (consider_overlongs && isFF_OVERLONG(s, len) > 0) {
+
+ /* To be such an overlong, the first bytes of 's' must match
+ * FF_OVERLONG_PREFIX, which is "\xff\x80\x80\x80\x80\x80\x80". If we
+ * don't have any additional bytes available, the sequence, when
+ * completed might or might not fit in 32 bits. But if we have that
+ * next byte, we can tell for sure. If it is <= 0x83, then it does
+ * fit. */
+ if (len <= sizeof(FF_OVERLONG_PREFIX) - 1) {
+ return -1;
+ }
+
+ return s[sizeof(FF_OVERLONG_PREFIX) - 1] > 0x83;
+ }
+
+/* Starting with the #else, the rest of the function is identical except
+ * 1. we need to move the 'len' declaration to be global to the function
+ * 2. the endif move to just after the UNUSED_ARG.
+ * An empty endif is given just below to satisfy the preprocessor
+ */
+#endif
+
+#endif
+
#undef F0_ABOVE_OVERLONG
#undef F8_ABOVE_OVERLONG
#undef FC_ABOVE_OVERLONG
* return will be larger than 'e - s'.
*
* This function assumes that the code point represented is UTF-8 variant.
- * The caller should have excluded this possibility before calling this
- * function.
+ * The caller should have excluded the possibility of it being invariant
+ * before calling this function.
*
* 'flags' can be 0, or any combination of the UTF8_DISALLOW_foo flags
* accepted by L</utf8n_to_uvchr>. If non-zero, this function will return
PERL_ARGS_ASSERT__IS_UTF8_CHAR_HELPER;
assert(0 == (flags & ~(UTF8_DISALLOW_ILLEGAL_INTERCHANGE
- |UTF8_DISALLOW_ABOVE_31_BIT)));
+ |UTF8_DISALLOW_PERL_EXTENDED)));
assert(! UTF8_IS_INVARIANT(*s));
/* A variant char must begin with a start byte */
if (flags && isUTF8_POSSIBLY_PROBLEMATIC(*s)) {
const U8 s0 = NATIVE_UTF8_TO_I8(s[0]);
- /* The code below is derived from this table. Keep in mind that legal
- * continuation bytes range between \x80..\xBF for UTF-8, and
- * \xA0..\xBF for I8. Anything above those aren't continuation bytes.
- * Hence, we don't have to test the upper edge because if any of those
- * are encountered, the sequence is malformed, and will fail elsewhere
- * in this function.
+ /* Here, we are disallowing some set of largish code points, and the
+ * first byte indicates the sequence is for a code point that could be
+ * in the excluded set. We generally don't have to look beyond this or
+ * the second byte to see if the sequence is actually for one of the
+ * excluded classes. The code below is derived from this table:
+ *
* UTF-8 UTF-EBCDIC I8
* U+D800: \xED\xA0\x80 \xF1\xB6\xA0\xA0 First surrogate
* U+DFFF: \xED\xBF\xBF \xF1\xB7\xBF\xBF Final surrogate
* U+110000: \xF4\x90\x80\x80 \xF9\xA2\xA0\xA0\xA0 First above Unicode
*
+ * Keep in mind that legal continuation bytes range between \x80..\xBF
+ * for UTF-8, and \xA0..\xBF for I8. Anything above those aren't
+ * continuation bytes. Hence, we don't have to test the upper edge
+ * because if any of those is encountered, the sequence is malformed,
+ * and would fail elsewhere in this function.
+ *
+ * The code here likewise assumes that there aren't other
+ * malformations; again the function should fail elsewhere because of
+ * these. For example, an overlong beginning with FC doesn't actually
+ * have to be a super; it could actually represent a small code point,
+ * even U+0000. But, since overlongs (and other malformations) are
+ * illegal, the function should return FALSE in either case.
*/
#ifdef EBCDIC /* On EBCDIC, these are actually I8 bytes */
# define IS_UTF8_2_BYTE_SURROGATE(s0, s1) ((s0) == 0xF1 \
/* B6 and B7 */ \
&& ((s1) & 0xFE ) == 0xB6)
+# define isUTF8_PERL_EXTENDED(s) (*s == I8_TO_NATIVE_UTF8(0xFF))
#else
# define FIRST_START_BYTE_THAT_IS_DEFINITELY_SUPER 0xF5
# define IS_UTF8_2_BYTE_SUPER(s0, s1) ((s0) == 0xF4 && (s1) >= 0x90)
# define IS_UTF8_2_BYTE_SURROGATE(s0, s1) ((s0) == 0xED && (s1) >= 0xA0)
+# define isUTF8_PERL_EXTENDED(s) (*s >= 0xFE)
#endif
if ( (flags & UTF8_DISALLOW_SUPER)
return 0; /* Above Unicode */
}
- if ( (flags & UTF8_DISALLOW_ABOVE_31_BIT)
- && UNLIKELY(is_utf8_cp_above_31_bits(s, e)))
+ if ( (flags & UTF8_DISALLOW_PERL_EXTENDED)
+ && UNLIKELY(isUTF8_PERL_EXTENDED(s)))
{
- return 0; /* Above 31 bits */
+ return 0;
}
if (len > 1) {
/* Here is syntactically valid. Next, make sure this isn't the start of an
* overlong. */
- if (len > 1 && is_utf8_overlong_given_start_byte_ok(s, len)) {
+ if (len > 1 && is_utf8_overlong_given_start_byte_ok(s, len) > 0) {
return 0;
}
/* And finally, that the code point represented fits in a word on this
* platform */
- if (does_utf8_overflow(s, e)) {
+ if (0 < does_utf8_overflow(s, e,
+ 0 /* Don't consider overlongs */
+ ))
+ {
return 0;
}
}
char *
-Perl__byte_dump_string(pTHX_ const U8 * s, const STRLEN len, const bool format)
+Perl__byte_dump_string(pTHX_ const U8 * const start, const STRLEN len, const bool format)
{
/* Returns a mortalized C string that is a displayable copy of the 'len'
- * bytes starting at 's'. 'format' gives how to display each byte.
+ * bytes starting at 'start'. 'format' gives how to display each byte.
* Currently, there are only two formats, so it is currently a bool:
* 0 \xab
* 1 ab (that is a space between two hex digit bytes)
const STRLEN output_len = 4 * len + 1; /* 4 bytes per each input, plus a
trailing NUL */
- const U8 * const e = s + len;
+ const U8 * s = start;
+ const U8 * const e = start + len;
char * output;
char * d;
SAVEFREEPV(output);
d = output;
- for (; s < e; s++) {
+ for (s = start; s < e; s++) {
const unsigned high_nibble = (*s & 0xF0) >> 4;
const unsigned low_nibble = (*s & 0x0F);
if (format) {
- *d++ = ' ';
+ if (s > start) {
+ *d++ = ' ';
+ }
}
else {
*d++ = '\\';
PERL_STATIC_INLINE char *
S_unexpected_non_continuation_text(pTHX_ const U8 * const s,
- /* How many bytes to print */
+ /* Max number of bytes to print */
STRLEN print_len,
/* Which one is the non-continuation */
? "immediately"
: Perl_form(aTHX_ "%d bytes",
(int) non_cont_byte_pos);
+ const U8 * x = s + non_cont_byte_pos;
+ const U8 * e = s + print_len;
PERL_ARGS_ASSERT_UNEXPECTED_NON_CONTINUATION_TEXT;
* calculated, it's likely faster to pass it; verify under DEBUGGING */
assert(expect_len == UTF8SKIP(s));
+ /* As a defensive coding measure, don't output anything past a NUL. Such
+ * bytes shouldn't be in the middle of a malformation, and could mark the
+ * end of the allocated string, and what comes after is undefined */
+ for (; x < e; x++) {
+ if (*x == '\0') {
+ x++; /* Output this particular NUL */
+ break;
+ }
+ }
+
return Perl_form(aTHX_ "%s: %s (unexpected non-continuation byte 0x%02x,"
" %s after start byte 0x%02x; need %d bytes, got %d)",
malformed_text,
- _byte_dump_string(s, print_len, 0),
+ _byte_dump_string(s, x - s, 0),
*(s + non_cont_byte_pos),
where,
*s,
character. Also, if UTF-8 warnings haven't been lexically disabled, a warning
is raised. Some UTF-8 input sequences may contain multiple malformations.
This function tries to find every possible one in each call, so multiple
-warnings can be raised for each sequence.
+warnings can be raised for the same sequence.
Various ALLOW flags can be set in C<flags> to allow (and not warn on)
individual types of malformations, such as the sequence being overlong (that
(But note that warnings are not raised if lexically disabled nor if
C<UTF8_CHECK_ONLY> is also specified.)
-It is now deprecated to have very high code points (above C<IV_MAX> on the
-platforms) and this function will raise a deprecation warning for these (unless
-such warnings are turned off). This value is typically 0x7FFF_FFFF (2**31 -1)
-in a 32-bit word.
-
-Code points above 0x7FFF_FFFF (2**31 - 1) were never specified in any standard,
-so using them is more problematic than other above-Unicode code points. Perl
-invented an extension to UTF-8 to represent the ones above 2**36-1, so it is
-likely that non-Perl languages will not be able to read files that contain
-these; nor would Perl understand files
-written by something that uses a different extension. For these reasons, there
-is a separate set of flags that can warn and/or disallow these extremely high
-code points, even if other above-Unicode ones are accepted. These are the
-C<UTF8_WARN_ABOVE_31_BIT> and C<UTF8_DISALLOW_ABOVE_31_BIT> flags. These
-are entirely independent from the deprecation warning for code points above
-C<IV_MAX>. On 32-bit machines, it will eventually be forbidden to have any
-code point that needs more than 31 bits to represent. When that happens,
-effectively the C<UTF8_DISALLOW_ABOVE_31_BIT> flag will always be set on
-32-bit machines. (Of course C<UTF8_DISALLOW_SUPER> will treat all
-above-Unicode code points, including these, as malformations; and
-C<UTF8_WARN_SUPER> warns on these.)
+Extremely high code points were never specified in any standard, and require an
+extension to UTF-8 to express, which Perl does. It is likely that programs
+written in something other than Perl would not be able to read files that
+contain these; nor would Perl understand files written by something that uses a
+different extension. For these reasons, there is a separate set of flags that
+can warn and/or disallow these extremely high code points, even if other
+above-Unicode ones are accepted. They are the C<UTF8_WARN_PERL_EXTENDED> and
+C<UTF8_DISALLOW_PERL_EXTENDED> flags. For more information see
+L</C<UTF8_GOT_PERL_EXTENDED>>. Of course C<UTF8_DISALLOW_SUPER> will treat all
+above-Unicode code points, including these, as malformations.
+(Note that the Unicode standard considers anything above 0x10FFFF to be
+illegal, but there are standards predating it that allow up to 0x7FFF_FFFF
+(2**31 -1))
+
+A somewhat misleadingly named synonym for C<UTF8_WARN_PERL_EXTENDED> is
+retained for backward compatibility: C<UTF8_WARN_ABOVE_31_BIT>. Similarly,
+C<UTF8_DISALLOW_ABOVE_31_BIT> is usable instead of the more accurately named
+C<UTF8_DISALLOW_PERL_EXTENDED>. The names are misleading because these flags
+can apply to code points that actually do fit in 31 bits. This happens on
+EBCDIC platforms, and sometimes when the L<overlong
+malformation|/C<UTF8_GOT_LONG>> is also present. The new names accurately
+describe the situation in all cases.
-On EBCDIC platforms starting in Perl v5.24, the Perl extension for representing
-extremely high code points kicks in at 0x3FFF_FFFF (2**30 -1), which is lower
-than on ASCII. Prior to that, code points 2**31 and higher were simply
-unrepresentable, and a different, incompatible method was used to represent
-code points between 2**30 and 2**31 - 1. The flags C<UTF8_WARN_ABOVE_31_BIT>
-and C<UTF8_DISALLOW_ABOVE_31_BIT> have the same function as on ASCII
-platforms, warning and disallowing 2**31 and higher.
All other code points corresponding to Unicode characters, including private
use and those yet to be assigned, are never considered malformed and never
Most code should use L</utf8_to_uvchr_buf>() rather than call this directly.
This function is for code that needs to know what the precise malformation(s)
-are when an error is found.
+are when an error is found. If you also need to know the generated warning
+messages, use L</utf8n_to_uvchr_msgs>() instead.
It is like C<L</utf8n_to_uvchr>> but it takes an extra parameter placed after
all the others, C<errors>. If this parameter is 0, this function behaves
=over 4
-=item C<UTF8_GOT_ABOVE_31_BIT>
+=item C<UTF8_GOT_PERL_EXTENDED>
-The code point represented by the input UTF-8 sequence occupies more than 31
-bits.
-This bit is set only if the input C<flags> parameter contains either the
-C<UTF8_DISALLOW_ABOVE_31_BIT> or the C<UTF8_WARN_ABOVE_31_BIT> flags.
+The input sequence is not standard UTF-8, but a Perl extension. This bit is
+set only if the input C<flags> parameter contains either the
+C<UTF8_DISALLOW_PERL_EXTENDED> or the C<UTF8_WARN_PERL_EXTENDED> flags.
+
+Code points above 0x7FFF_FFFF (2**31 - 1) were never specified in any standard,
+and so some extension must be used to express them. Perl uses a natural
+extension to UTF-8 to represent the ones up to 2**36-1, and invented a further
+extension to represent even higher ones, so that any code point that fits in a
+64-bit word can be represented. Text using these extensions is not likely to
+be portable to non-Perl code. We lump both of these extensions together and
+refer to them as Perl extended UTF-8. There exist other extensions that people
+have invented, incompatible with Perl's.
+
+On EBCDIC platforms starting in Perl v5.24, the Perl extension for representing
+extremely high code points kicks in at 0x3FFF_FFFF (2**30 -1), which is lower
+than on ASCII. Prior to that, code points 2**31 and higher were simply
+unrepresentable, and a different, incompatible method was used to represent
+code points between 2**30 and 2**31 - 1.
+
+On both platforms, ASCII and EBCDIC, C<UTF8_GOT_PERL_EXTENDED> is set if
+Perl extended UTF-8 is used.
+
+In earlier Perls, this bit was named C<UTF8_GOT_ABOVE_31_BIT>, which you still
+may use for backward compatibility. That name is misleading, as this flag may
+be set when the code point actually does fit in 31 bits. This happens on
+EBCDIC platforms, and sometimes when the L<overlong
+malformation|/C<UTF8_GOT_LONG>> is also present. The new name accurately
+describes the situation in all cases.
=item C<UTF8_GOT_CONTINUATION>
The input sequence was malformed in that there is some other sequence that
evaluates to the same code point, but that sequence is shorter than this one.
+Until Unicode 3.1, it was legal for programs to accept this malformation, but
+it was discovered that this created security issues.
+
=item C<UTF8_GOT_NONCHAR>
The code point represented by the input UTF-8 sequence is for a Unicode
=item C<UTF8_GOT_OVERFLOW>
The input sequence was malformed in that it is for a code point that is not
-representable in the number of bits available in a UV on the current platform.
+representable in the number of bits available in an IV on the current platform.
=item C<UTF8_GOT_SHORT>
flag to suppress any warnings, and then examine the C<*errors> return.
=cut
+
+Also implemented as a macro in utf8.h
*/
UV
Perl_utf8n_to_uvchr_error(pTHX_ const U8 *s,
- STRLEN curlen,
- STRLEN *retlen,
- const U32 flags,
- U32 * errors)
+ STRLEN curlen,
+ STRLEN *retlen,
+ const U32 flags,
+ U32 * errors)
+{
+ PERL_ARGS_ASSERT_UTF8N_TO_UVCHR_ERROR;
+
+ return utf8n_to_uvchr_msgs(s, curlen, retlen, flags, errors, NULL);
+}
+
+/*
+
+=for apidoc utf8n_to_uvchr_msgs
+
+THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES.
+Most code should use L</utf8_to_uvchr_buf>() rather than call this directly.
+
+This function is for code that needs to know what the precise malformation(s)
+are when an error is found, and wants the corresponding warning and/or error
+messages to be returned to the caller rather than be displayed. All messages
+that would have been displayed if all lexcial warnings are enabled will be
+returned.
+
+It is just like C<L</utf8n_to_uvchr_error>> but it takes an extra parameter
+placed after all the others, C<msgs>. If this parameter is 0, this function
+behaves identically to C<L</utf8n_to_uvchr_error>>. Otherwise, C<msgs> should
+be a pointer to an C<AV *> variable, in which this function creates a new AV to
+contain any appropriate messages. The elements of the array are ordered so
+that the first message that would have been displayed is in the 0th element,
+and so on. Each element is a hash with three key-value pairs, as follows:
+
+=over 4
+
+=item C<text>
+
+The text of the message as a C<SVpv>.
+
+=item C<warn_categories>
+
+The warning category (or categories) packed into a C<SVuv>.
+
+=item C<flag>
+
+A single flag bit associated with this message, in a C<SVuv>.
+The bit corresponds to some bit in the C<*errors> return value,
+such as C<UTF8_GOT_LONG>.
+
+=back
+
+It's important to note that specifying this parameter as non-null will cause
+any warnings this function would otherwise generate to be suppressed, and
+instead be placed in C<*msgs>. The caller can check the lexical warnings state
+(or not) when choosing what to do with the returned messages.
+
+If the flag C<UTF8_CHECK_ONLY> is passed, no warnings are generated, and hence
+no AV is created.
+
+The caller, of course, is responsible for freeing any returned AV.
+
+=cut
+*/
+
+UV
+Perl_utf8n_to_uvchr_msgs(pTHX_ const U8 *s,
+ STRLEN curlen,
+ STRLEN *retlen,
+ const U32 flags,
+ U32 * errors,
+ AV ** msgs)
{
const U8 * const s0 = s;
- U8 * send = NULL; /* (initialized to silence compilers' wrong
- warning) */
- U32 possible_problems = 0; /* A bit is set here for each potential problem
- found as we go along */
- UV uv = *s;
- STRLEN expectlen = 0; /* How long should this sequence be?
- (initialized to silence compilers' wrong
- warning) */
- STRLEN avail_len = 0; /* When input is too short, gives what that is */
- U32 discard_errors = 0; /* Used to save branches when 'errors' is NULL;
- this gets set and discarded */
+ const U8 * send = s0 + curlen;
+ U32 possible_problems; /* A bit is set here for each potential problem
+ found as we go along */
+ UV uv;
+ STRLEN expectlen; /* How long should this sequence be? */
+ STRLEN avail_len; /* When input is too short, gives what that is */
+ U32 discard_errors; /* Used to save branches when 'errors' is NULL; this
+ gets set and discarded */
/* The below are used only if there is both an overlong malformation and a
* too short one. Otherwise the first two are set to 's0' and 'send', and
* the third not used at all */
- U8 * adjusted_s0 = (U8 *) s0;
- U8 * adjusted_send = NULL; /* (Initialized to silence compilers' wrong
- warning) */
+ U8 * adjusted_s0;
U8 temp_char_buf[UTF8_MAXBYTES + 1]; /* Used to avoid a Newx in this
routine; see [perl #130921] */
- UV uv_so_far = 0; /* (Initialized to silence compilers' wrong warning) */
+ UV uv_so_far;
+ UV state = 0;
- PERL_ARGS_ASSERT_UTF8N_TO_UVCHR_ERROR;
+ PERL_ARGS_ASSERT_UTF8N_TO_UVCHR_MSGS;
+
+ /* Measurements show that this dfa is somewhat faster than the regular code
+ * below, so use it first, dropping down for the non-normal cases. */
+
+#define PERL_UTF8_DECODE_REJECT 1
+
+ while (s < send && LIKELY(state != PERL_UTF8_DECODE_REJECT)) {
+ UV type = strict_utf8_dfa_tab[*s];
+
+ uv = (state == 0)
+ ? ((0xff >> type) & NATIVE_UTF8_TO_I8(*s))
+ : UTF8_ACCUMULATE(uv, *s);
+ state = strict_utf8_dfa_tab[256 + state + type];
+
+ if (state == 0) {
+ if (retlen) {
+ *retlen = s - s0 + 1;
+ }
+ if (errors) {
+ *errors = 0;
+ }
+ if (msgs) {
+ *msgs = NULL;
+ }
+
+ return uv;
+ }
+
+ s++;
+ }
+
+ /* Here, is one of: a) malformed; b) a problematic code point (surrogate,
+ * non-unicode, or nonchar); or c) on ASCII platforms, one of the Hangul
+ * syllables that the dfa doesn't properly handle. Quickly dispose of the
+ * final case. */
+
+#ifndef EBCDIC
+
+ /* Each of the affected Hanguls starts with \xED */
+
+ if (is_HANGUL_ED_utf8_safe(s0, send)) {
+ if (retlen) {
+ *retlen = 3;
+ }
+ if (errors) {
+ *errors = 0;
+ }
+ if (msgs) {
+ *msgs = NULL;
+ }
+
+ return ((0xED & UTF_START_MASK(3)) << (2 * UTF_ACCUMULATION_SHIFT))
+ | ((s0[1] & UTF_CONTINUATION_MASK) << UTF_ACCUMULATION_SHIFT)
+ | (s0[2] & UTF_CONTINUATION_MASK);
+ }
+
+#endif
+
+ /* In conjunction with the exhaustive tests that can be enabled in
+ * APItest/t/utf8_warn_base.pl, this can make sure the dfa does precisely
+ * what it is intended to do, and that no flaws in it are masked by
+ * dropping down and executing the code below
+ assert(! isUTF8_CHAR(s0, send)
+ || UTF8_IS_SURROGATE(s0, send)
+ || UTF8_IS_SUPER(s0, send)
+ || UTF8_IS_NONCHAR(s0,send));
+ */
+
+ s = s0;
+ uv = *s0;
+ possible_problems = 0;
+ expectlen = 0;
+ avail_len = 0;
+ discard_errors = 0;
+ adjusted_s0 = (U8 *) s0;
+ uv_so_far = 0;
if (errors) {
*errors = 0;
*retlen = expectlen;
}
- /* An invariant is trivially well-formed */
- if (UTF8_IS_INVARIANT(uv)) {
- return uv;
- }
-
/* A continuation character can't start a valid sequence */
if (UNLIKELY(UTF8_IS_CONTINUATION(uv))) {
possible_problems |= UTF8_GOT_CONTINUATION;
/* Setup the loop end point, making sure to not look past the end of the
* input string, and flag it as too short if the size isn't big enough. */
- send = (U8*) s0;
if (UNLIKELY(curlen < expectlen)) {
possible_problems |= UTF8_GOT_SHORT;
avail_len = curlen;
- send += curlen;
}
else {
- send += expectlen;
+ send = (U8*) s0 + expectlen;
}
- adjusted_send = send;
/* Now, loop through the remaining bytes in the character's sequence,
* accumulating each into the working value as we go. */
uv = UNICODE_REPLACEMENT;
}
- /* Check for overflow */
- if (UNLIKELY(does_utf8_overflow(s0, send))) {
+ /* Check for overflow. The algorithm requires us to not look past the end
+ * of the current character, even if partial, so the upper limit is 's' */
+ if (UNLIKELY(0 < does_utf8_overflow(s0, s,
+ 1 /* Do consider overlongs */
+ )))
+ {
possible_problems |= UTF8_GOT_OVERFLOW;
uv = UNICODE_REPLACEMENT;
}
* overlong */
if ( ( LIKELY(! possible_problems)
&& UNLIKELY(expectlen > (STRLEN) OFFUNISKIP(uv)))
- || ( UNLIKELY( possible_problems)
+ || ( UNLIKELY(possible_problems)
&& ( UNLIKELY(! UTF8_IS_START(*s0))
|| ( curlen > 1
- && UNLIKELY(is_utf8_overlong_given_start_byte_ok(s0,
- send - s0))))))
+ && UNLIKELY(0 < is_utf8_overlong_given_start_byte_ok(s0,
+ s - s0))))))
{
possible_problems |= UTF8_GOT_LONG;
- if (UNLIKELY(possible_problems & UTF8_GOT_TOO_SHORT)) {
+ if ( UNLIKELY( possible_problems & UTF8_GOT_TOO_SHORT)
+
+ /* The calculation in the 'true' branch of this 'if'
+ * below won't work if overflows, and isn't needed
+ * anyway. Further below we handle all overflow
+ * cases */
+ && LIKELY(! (possible_problems & UTF8_GOT_OVERFLOW)))
+ {
UV min_uv = uv_so_far;
STRLEN i;
* bytes. There is no single code point it could be for, but there
* may be enough information present to determine if what we have
* so far is for an unallowed code point, such as for a surrogate.
- * The code below has the intelligence to determine this, but just
- * for non-overlong UTF-8 sequences. What we do here is calculate
- * the smallest code point the input could represent if there were
- * no too short malformation. Then we compute and save the UTF-8
- * for that, which is what the code below looks at instead of the
- * raw input. It turns out that the smallest such code point is
- * all we need. */
+ * The code further below has the intelligence to determine this,
+ * but just for non-overlong UTF-8 sequences. What we do here is
+ * calculate the smallest code point the input could represent if
+ * there were no too short malformation. Then we compute and save
+ * the UTF-8 for that, which is what the code below looks at
+ * instead of the raw input. It turns out that the smallest such
+ * code point is all we need. */
for (i = curlen; i < expectlen; i++) {
min_uv = UTF8_ACCUMULATE(min_uv,
I8_TO_NATIVE_UTF8(UTF_CONTINUATION_MARK));
}
adjusted_s0 = temp_char_buf;
- adjusted_send = uvoffuni_to_utf8_flags(adjusted_s0, min_uv, 0);
+ (void) uvoffuni_to_utf8_flags(adjusted_s0, min_uv, 0);
}
}
- /* Now check that the input isn't for a problematic code point not allowed
- * by the input parameters. */
- /* isn't problematic if < this */
- if ( ( ( LIKELY(! possible_problems) && uv >= UNICODE_SURROGATE_FIRST)
+ /* Here, we have found all the possible problems, except for when the input
+ * is for a problematic code point not allowed by the input parameters. */
+
+ /* uv is valid for overlongs */
+ if ( ( ( LIKELY(! (possible_problems & ~UTF8_GOT_LONG))
+
+ /* isn't problematic if < this */
+ && uv >= UNICODE_SURROGATE_FIRST)
|| ( UNLIKELY(possible_problems)
/* if overflow, we know without looking further
* and we deal with those in the overflow handling
* code */
&& LIKELY(! (possible_problems & UTF8_GOT_OVERFLOW))
- && isUTF8_POSSIBLY_PROBLEMATIC(*adjusted_s0)))
+ && ( isUTF8_POSSIBLY_PROBLEMATIC(*adjusted_s0)
+ || UNLIKELY(isUTF8_PERL_EXTENDED(s0)))))
&& ((flags & ( UTF8_DISALLOW_NONCHAR
|UTF8_DISALLOW_SURROGATE
|UTF8_DISALLOW_SUPER
- |UTF8_DISALLOW_ABOVE_31_BIT
+ |UTF8_DISALLOW_PERL_EXTENDED
|UTF8_WARN_NONCHAR
|UTF8_WARN_SURROGATE
|UTF8_WARN_SUPER
- |UTF8_WARN_ABOVE_31_BIT))
- /* In case of a malformation, 'uv' is not valid, and has
- * been changed to something in the Unicode range.
- * Currently we don't output a deprecation message if there
- * is already a malformation, so we don't have to special
- * case the test immediately below */
- || ( UNLIKELY(uv > MAX_NON_DEPRECATED_CP)
- && ckWARN_d(WARN_DEPRECATED))))
+ |UTF8_WARN_PERL_EXTENDED))))
{
/* If there were no malformations, or the only malformation is an
* overlong, 'uv' is valid */
* some subsitute value, typically the REPLACEMENT
* CHARACTER.
* s0 points to the first byte of the character
- * send points to just after where that (potentially
- * partial) character ends
- * adjusted_s0 normally is the same as s0, but in case of an
- * overlong for which the UTF-8 matters below, it is
- * the first byte of the shortest form representation
- * of the input.
- * adjusted_send normally is the same as 'send', but if adjusted_s0
- * is set to something other than s0, this points one
- * beyond its end
+ * s points to just after were we left off processing
+ * the character
+ * send points to just after where that character should
+ * end, based on how many bytes the start byte tells
+ * us should be in it, but no further than s0 +
+ * avail_len
*/
if (UNLIKELY(possible_problems)) {
bool disallowed = FALSE;
const U32 orig_problems = possible_problems;
+ if (msgs) {
+ *msgs = NULL;
+ }
+
while (possible_problems) { /* Handle each possible problem */
UV pack_warn = 0;
char * message = NULL;
+ U32 this_flag_bit = 0;
/* Each 'if' clause handles one problem. They are ordered so that
* the first ones' messages will be displayed before the later
- * ones; this is kinda in decreasing severity order */
+ * ones; this is kinda in decreasing severity order. But the
+ * overlong must come last, as it changes 'uv' looked at by the
+ * others */
if (possible_problems & UTF8_GOT_OVERFLOW) {
- /* Overflow means also got a super and above 31 bits, but we
- * handle all three cases here */
+ /* Overflow means also got a super and are using Perl's
+ * extended UTF-8, but we handle all three cases here */
possible_problems
- &= ~(UTF8_GOT_OVERFLOW|UTF8_GOT_SUPER|UTF8_GOT_ABOVE_31_BIT);
+ &= ~(UTF8_GOT_OVERFLOW|UTF8_GOT_SUPER|UTF8_GOT_PERL_EXTENDED);
*errors |= UTF8_GOT_OVERFLOW;
/* But the API says we flag all errors found */
*errors |= UTF8_GOT_SUPER;
}
if (flags
- & (UTF8_WARN_ABOVE_31_BIT|UTF8_DISALLOW_ABOVE_31_BIT))
+ & (UTF8_WARN_PERL_EXTENDED|UTF8_DISALLOW_PERL_EXTENDED))
{
- *errors |= UTF8_GOT_ABOVE_31_BIT;
+ *errors |= UTF8_GOT_PERL_EXTENDED;
}
/* Disallow if any of the three categories say to */
- if ( ! (flags & UTF8_ALLOW_OVERFLOW)
+ if ( ! (flags & UTF8_ALLOW_OVERFLOW)
|| (flags & ( UTF8_DISALLOW_SUPER
- |UTF8_DISALLOW_ABOVE_31_BIT)))
+ |UTF8_DISALLOW_PERL_EXTENDED)))
{
disallowed = TRUE;
}
-
- /* Likewise, warn if any say to, plus if deprecation warnings
- * are on, because this code point is above IV_MAX */
- if ( ckWARN_d(WARN_DEPRECATED)
- || ! (flags & UTF8_ALLOW_OVERFLOW)
- || (flags & (UTF8_WARN_SUPER|UTF8_WARN_ABOVE_31_BIT)))
+ /* Likewise, warn if any say to */
+ if ( ! (flags & UTF8_ALLOW_OVERFLOW)
+ || (flags & (UTF8_WARN_SUPER|UTF8_WARN_PERL_EXTENDED)))
{
/* The warnings code explicitly says it doesn't handle the
* parent-child relationship. Even if it works now to
* raise the warning if either is enabled, it wouldn't
* necessarily do so in the future. We output (only) the
- * most dire warning*/
+ * most dire warning */
if (! (flags & UTF8_CHECK_ONLY)) {
- if (ckWARN_d(WARN_UTF8)) {
+ if (msgs || ckWARN_d(WARN_UTF8)) {
pack_warn = packWARN(WARN_UTF8);
}
- else if (ckWARN_d(WARN_NON_UNICODE)) {
+ else if (msgs || ckWARN_d(WARN_NON_UNICODE)) {
pack_warn = packWARN(WARN_NON_UNICODE);
}
if (pack_warn) {
message = Perl_form(aTHX_ "%s: %s (overflows)",
malformed_text,
- _byte_dump_string(s0, send - s0, 0));
+ _byte_dump_string(s0, curlen, 0));
+ this_flag_bit = UTF8_GOT_OVERFLOW;
}
}
}
assert(0);
disallowed = TRUE;
- if (ckWARN_d(WARN_UTF8) && ! (flags & UTF8_CHECK_ONLY)) {
+ if ( (msgs
+ || ckWARN_d(WARN_UTF8)) && ! (flags & UTF8_CHECK_ONLY))
+ {
pack_warn = packWARN(WARN_UTF8);
message = Perl_form(aTHX_ "%s (empty string)",
malformed_text);
+ this_flag_bit = UTF8_GOT_EMPTY;
}
}
}
if (! (flags & UTF8_ALLOW_CONTINUATION)) {
disallowed = TRUE;
- if (ckWARN_d(WARN_UTF8) && ! (flags & UTF8_CHECK_ONLY)) {
+ if (( msgs
+ || ckWARN_d(WARN_UTF8)) && ! (flags & UTF8_CHECK_ONLY))
+ {
pack_warn = packWARN(WARN_UTF8);
message = Perl_form(aTHX_
"%s: %s (unexpected continuation byte 0x%02x,"
" with no preceding start byte)",
malformed_text,
_byte_dump_string(s0, 1, 0), *s0);
+ this_flag_bit = UTF8_GOT_CONTINUATION;
}
}
}
if (! (flags & UTF8_ALLOW_SHORT)) {
disallowed = TRUE;
- if (ckWARN_d(WARN_UTF8) && ! (flags & UTF8_CHECK_ONLY)) {
+ if (( msgs
+ || ckWARN_d(WARN_UTF8)) && ! (flags & UTF8_CHECK_ONLY))
+ {
pack_warn = packWARN(WARN_UTF8);
message = Perl_form(aTHX_
- "%s: %s (too short; %d byte%s available, need %d)",
- malformed_text,
- _byte_dump_string(s0, send - s0, 0),
- (int)avail_len,
- avail_len == 1 ? "" : "s",
- (int)expectlen);
+ "%s: %s (too short; %d byte%s available, need %d)",
+ malformed_text,
+ _byte_dump_string(s0, send - s0, 0),
+ (int)avail_len,
+ avail_len == 1 ? "" : "s",
+ (int)expectlen);
+ this_flag_bit = UTF8_GOT_SHORT;
}
}
if (! (flags & UTF8_ALLOW_NON_CONTINUATION)) {
disallowed = TRUE;
- if (ckWARN_d(WARN_UTF8) && ! (flags & UTF8_CHECK_ONLY)) {
+ if (( msgs
+ || ckWARN_d(WARN_UTF8)) && ! (flags & UTF8_CHECK_ONLY))
+ {
/* If we don't know for sure that the input length is
* valid, avoid as much as possible reading past the
printlen,
s - s0,
(int) expectlen));
- }
- }
- }
- else if (possible_problems & UTF8_GOT_LONG) {
- possible_problems &= ~UTF8_GOT_LONG;
- *errors |= UTF8_GOT_LONG;
-
- if (flags & UTF8_ALLOW_LONG) {
-
- /* We don't allow the actual overlong value, unless the
- * special extra bit is also set */
- if (! (flags & ( UTF8_ALLOW_LONG_AND_ITS_VALUE
- & ~UTF8_ALLOW_LONG)))
- {
- uv = UNICODE_REPLACEMENT;
- }
- }
- else {
- disallowed = TRUE;
-
- if (ckWARN_d(WARN_UTF8) && ! (flags & UTF8_CHECK_ONLY)) {
- pack_warn = packWARN(WARN_UTF8);
-
- /* These error types cause 'uv' to be something that
- * isn't what was intended, so can't use it in the
- * message. The other error types either can't
- * generate an overlong, or else the 'uv' is valid */
- if (orig_problems &
- (UTF8_GOT_TOO_SHORT|UTF8_GOT_OVERFLOW))
- {
- message = Perl_form(aTHX_
- "%s: %s (any UTF-8 sequence that starts"
- " with \"%s\" is overlong which can and"
- " should be represented with a"
- " different, shorter sequence)",
- malformed_text,
- _byte_dump_string(s0, send - s0, 0),
- _byte_dump_string(s0, curlen, 0));
- }
- else {
- U8 tmpbuf[UTF8_MAXBYTES+1];
- const U8 * const e = uvoffuni_to_utf8_flags(tmpbuf,
- uv, 0);
- message = Perl_form(aTHX_
- "%s: %s (overlong; instead use %s to represent"
- " U+%0*" UVXf ")",
- malformed_text,
- _byte_dump_string(s0, send - s0, 0),
- _byte_dump_string(tmpbuf, e - tmpbuf, 0),
- ((uv < 256) ? 2 : 4), /* Field width of 2 for
- small code points */
- uv);
- }
+ this_flag_bit = UTF8_GOT_NON_CONTINUATION;
}
}
}
*errors |= UTF8_GOT_SURROGATE;
if ( ! (flags & UTF8_CHECK_ONLY)
- && ckWARN_d(WARN_SURROGATE))
+ && (msgs || ckWARN_d(WARN_SURROGATE)))
{
pack_warn = packWARN(WARN_SURROGATE);
_byte_dump_string(s0, curlen, 0));
}
else {
- message = Perl_form(aTHX_
- "UTF-16 surrogate U+%04" UVXf, uv);
+ message = Perl_form(aTHX_ surrogate_cp_format, uv);
}
+ this_flag_bit = UTF8_GOT_SURROGATE;
}
}
*errors |= UTF8_GOT_SUPER;
if ( ! (flags & UTF8_CHECK_ONLY)
- && ckWARN_d(WARN_NON_UNICODE))
+ && (msgs || ckWARN_d(WARN_NON_UNICODE)))
{
pack_warn = packWARN(WARN_NON_UNICODE);
_byte_dump_string(s0, curlen, 0));
}
else {
- message = Perl_form(aTHX_
- "Code point 0x%04" UVXf " is not"
- " Unicode, may not be portable",
- uv);
+ message = Perl_form(aTHX_ super_cp_format, uv);
}
+ this_flag_bit = UTF8_GOT_SUPER;
}
}
- /* The maximum code point ever specified by a standard was
- * 2**31 - 1. Anything larger than that is a Perl extension
- * that very well may not be understood by other applications
- * (including earlier perl versions on EBCDIC platforms). We
- * test for these after the regular SUPER ones, and before
- * possibly bailing out, so that the slightly more dire warning
- * will override the regular one. */
- if ( (flags & (UTF8_WARN_ABOVE_31_BIT
- |UTF8_WARN_SUPER
- |UTF8_DISALLOW_ABOVE_31_BIT))
- && ( ( UNLIKELY(orig_problems & UTF8_GOT_TOO_SHORT)
- && UNLIKELY(is_utf8_cp_above_31_bits(
- adjusted_s0,
- adjusted_send)))
- || ( LIKELY(! (orig_problems & UTF8_GOT_TOO_SHORT))
- && UNLIKELY(UNICODE_IS_ABOVE_31_BIT(uv)))))
- {
+ /* Test for Perl's extended UTF-8 after the regular SUPER ones,
+ * and before possibly bailing out, so that the more dire
+ * warning will override the regular one. */
+ if (UNLIKELY(isUTF8_PERL_EXTENDED(s0))) {
if ( ! (flags & UTF8_CHECK_ONLY)
- && (flags & (UTF8_WARN_ABOVE_31_BIT|UTF8_WARN_SUPER))
- && ckWARN_d(WARN_UTF8))
+ && (flags & (UTF8_WARN_PERL_EXTENDED|UTF8_WARN_SUPER))
+ && (msgs || ckWARN_d(WARN_NON_UNICODE)))
{
- pack_warn = packWARN(WARN_UTF8);
+ pack_warn = packWARN(WARN_NON_UNICODE);
- if (orig_problems & UTF8_GOT_TOO_SHORT) {
+ /* If it is an overlong that evaluates to a code point
+ * that doesn't have to use the Perl extended UTF-8, it
+ * still used it, and so we output a message that
+ * doesn't refer to the code point. The same is true
+ * if there was a SHORT malformation where the code
+ * point is not valid. In that case, 'uv' will have
+ * been set to the REPLACEMENT CHAR, and the message
+ * below without the code point in it will be selected
+ * */
+ if (UNICODE_IS_PERL_EXTENDED(uv)) {
message = Perl_form(aTHX_
- "Any UTF-8 sequence that starts with"
- " \"%s\" is for a non-Unicode code"
- " point, and is not portable",
- _byte_dump_string(s0, curlen, 0));
+ perl_extended_cp_format, uv);
}
else {
message = Perl_form(aTHX_
- "Code point 0x%" UVXf " is not Unicode,"
- " and not portable",
- uv);
+ "Any UTF-8 sequence that starts with"
+ " \"%s\" is a Perl extension, and"
+ " so is not portable",
+ _byte_dump_string(s0, curlen, 0));
}
+ this_flag_bit = UTF8_GOT_PERL_EXTENDED;
}
- if (flags & ( UTF8_WARN_ABOVE_31_BIT
- |UTF8_DISALLOW_ABOVE_31_BIT))
+ if (flags & ( UTF8_WARN_PERL_EXTENDED
+ |UTF8_DISALLOW_PERL_EXTENDED))
{
- *errors |= UTF8_GOT_ABOVE_31_BIT;
+ *errors |= UTF8_GOT_PERL_EXTENDED;
- if (flags & UTF8_DISALLOW_ABOVE_31_BIT) {
+ if (flags & UTF8_DISALLOW_PERL_EXTENDED) {
disallowed = TRUE;
}
}
*errors |= UTF8_GOT_SUPER;
disallowed = TRUE;
}
-
- /* The deprecated warning overrides any non-deprecated one. If
- * there are other problems, a deprecation message is not
- * really helpful, so don't bother to raise it in that case.
- * This also keeps the code from having to handle the case
- * where 'uv' is not valid. */
- if ( ! (orig_problems
- & (UTF8_GOT_TOO_SHORT|UTF8_GOT_OVERFLOW))
- && UNLIKELY(uv > MAX_NON_DEPRECATED_CP)) {
- Perl_croak(aTHX_ cp_above_legal_max, uv,
- MAX_NON_DEPRECATED_CP);
- }
}
else if (possible_problems & UTF8_GOT_NONCHAR) {
possible_problems &= ~UTF8_GOT_NONCHAR;
*errors |= UTF8_GOT_NONCHAR;
if ( ! (flags & UTF8_CHECK_ONLY)
- && ckWARN_d(WARN_NONCHAR))
+ && (msgs || ckWARN_d(WARN_NONCHAR)))
{
/* The code above should have guaranteed that we don't
* get here with errors other than overlong */
& ~(UTF8_GOT_LONG|UTF8_GOT_NONCHAR)));
pack_warn = packWARN(WARN_NONCHAR);
- message = Perl_form(aTHX_ "Unicode non-character"
- " U+%04" UVXf " is not recommended"
- " for open interchange", uv);
+ message = Perl_form(aTHX_ nonchar_cp_format, uv);
+ this_flag_bit = UTF8_GOT_NONCHAR;
}
}
disallowed = TRUE;
*errors |= UTF8_GOT_NONCHAR;
}
+ }
+ else if (possible_problems & UTF8_GOT_LONG) {
+ possible_problems &= ~UTF8_GOT_LONG;
+ *errors |= UTF8_GOT_LONG;
+
+ if (flags & UTF8_ALLOW_LONG) {
+
+ /* We don't allow the actual overlong value, unless the
+ * special extra bit is also set */
+ if (! (flags & ( UTF8_ALLOW_LONG_AND_ITS_VALUE
+ & ~UTF8_ALLOW_LONG)))
+ {
+ uv = UNICODE_REPLACEMENT;
+ }
+ }
+ else {
+ disallowed = TRUE;
+
+ if (( msgs
+ || ckWARN_d(WARN_UTF8)) && ! (flags & UTF8_CHECK_ONLY))
+ {
+ pack_warn = packWARN(WARN_UTF8);
+
+ /* These error types cause 'uv' to be something that
+ * isn't what was intended, so can't use it in the
+ * message. The other error types either can't
+ * generate an overlong, or else the 'uv' is valid */
+ if (orig_problems &
+ (UTF8_GOT_TOO_SHORT|UTF8_GOT_OVERFLOW))
+ {
+ message = Perl_form(aTHX_
+ "%s: %s (any UTF-8 sequence that starts"
+ " with \"%s\" is overlong which can and"
+ " should be represented with a"
+ " different, shorter sequence)",
+ malformed_text,
+ _byte_dump_string(s0, send - s0, 0),
+ _byte_dump_string(s0, curlen, 0));
+ }
+ else {
+ U8 tmpbuf[UTF8_MAXBYTES+1];
+ const U8 * const e = uvoffuni_to_utf8_flags(tmpbuf,
+ uv, 0);
+ /* Don't use U+ for non-Unicode code points, which
+ * includes those in the Latin1 range */
+ const char * preface = ( uv > PERL_UNICODE_MAX
+#ifdef EBCDIC
+ || uv <= 0xFF
+#endif
+ )
+ ? "0x"
+ : "U+";
+ message = Perl_form(aTHX_
+ "%s: %s (overlong; instead use %s to represent"
+ " %s%0*" UVXf ")",
+ malformed_text,
+ _byte_dump_string(s0, send - s0, 0),
+ _byte_dump_string(tmpbuf, e - tmpbuf, 0),
+ preface,
+ ((uv < 256) ? 2 : 4), /* Field width of 2 for
+ small code points */
+ UNI_TO_NATIVE(uv));
+ }
+ this_flag_bit = UTF8_GOT_LONG;
+ }
+ }
} /* End of looking through the possible flags */
/* Display the message (if any) for the problem being handled in
* this iteration of the loop */
if (message) {
- if (PL_op)
+ if (msgs) {
+ assert(this_flag_bit);
+
+ if (*msgs == NULL) {
+ *msgs = newAV();
+ }
+
+ av_push(*msgs, newRV_noinc((SV*) new_msg_hv(message,
+ pack_warn,
+ this_flag_bit)));
+ }
+ else if (PL_op)
Perl_warner(aTHX_ pack_warn, "%s in %s", message,
OP_DESC(PL_op));
else
See L</utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is
returned.
-Code points above the platform's C<IV_MAX> will raise a deprecation warning,
-unless those are turned off.
-
=cut
Also implemented as a macro in utf8.h
Only in very rare circumstances should code need to be dealing in Unicode
(as opposed to native) code points. In those few cases, use
-C<L<NATIVE_TO_UNI(utf8_to_uvchr_buf(...))|/utf8_to_uvchr_buf>> instead.
+C<L<NATIVE_TO_UNI(utf8_to_uvchr_buf(...))|/utf8_to_uvchr_buf>> instead. If you
+are not absolutely sure this is one of those cases, then assume it isn't and
+use plain C<utf8_to_uvchr_buf> instead.
Returns the Unicode (not-native) code point of the first character in the
string C<s> which
next possible position in C<s> that could begin a non-malformed character.
See L</utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned.
-Code points above the platform's C<IV_MAX> will raise a deprecation warning,
-unless those are turned off.
-
=cut
*/
assert(send > s);
- /* Call the low level routine, asking for checks */
return NATIVE_TO_UNI(utf8_to_uvchr_buf(s, send, retlen));
}
/*
=for apidoc utf8_length
-Return the length of the UTF-8 char encoded string C<s> in characters.
-Stops at C<e> (inclusive). If C<e E<lt> s> or if the scan would end
-up past C<e>, croaks.
+Returns the number of characters in the sequence of UTF-8-encoded bytes starting
+at C<s> and ending at the byte just before C<e>. If <s> and <e> point to the
+same place, it returns 0 with no warning raised.
+
+If C<e E<lt> s> or if the scan would end up past C<e>, it raises a UTF8 warning
+and returns the number of valid characters.
=cut
*/
} else {
/* diag_listed_as: Malformed UTF-8 character%s */
Perl_ck_warner_d(aTHX_ packWARN(WARN_UTF8),
- "%s %s%s",
- unexpected_non_continuation_text(u - 1, 2, 1, 2),
- PL_op ? " in " : "",
- PL_op ? OP_DESC(PL_op) : "");
+ "%s %s%s",
+ unexpected_non_continuation_text(u - 2, 2, 1, 2),
+ PL_op ? " in " : "",
+ PL_op ? OP_DESC(PL_op) : "");
return -2;
}
} else {
Otherwise, C<*is_utf8p> is set to 0, and the return value is a pointer to a
newly created string containing a downgraded copy of C<s>, and whose length is
-returned in C<*lenp>, updated. The new string is C<NUL>-terminated.
+returned in C<*lenp>, updated. The new string is C<NUL>-terminated. The
+caller is responsible for arranging for the memory used by this string to get
+freed.
Upon successful return, the number of variants in the string can be computed by
having saved the value of C<*lenp> before the call, and subtracting the
Another way to look at it is, if C<*first_non_downgradable> is non-C<NULL> and
C<*is_utf8p> is TRUE, this function starts at the beginning of C<"s"> and
converts as many characters in it as possible stopping at the first one it
-finds one that can't be converted to non-UTF-8. C<*first_non_downgradable> is
+finds that can't be converted to non-UTF-8. C<*first_non_downgradable> is
set to point to that. The function returns the portion that could be converted
in a newly created C<NUL>-terminated string, and C<*lenp> is set to its length,
not including the terminating C<NUL>. If the very first character in the
}
finish_and_return:
- *d = '\0';
- *lenp = d - converted_start;
+ *d = '\0';
+ *lenp = d - converted_start;
/* Trim unused space */
Renew(converted_start, *lenp + 1, U8);
Converts a string C<s> of length C<*lenp> bytes from the native encoding into
UTF-8.
Returns a pointer to the newly-created string, and sets C<*lenp> to
-reflect the new length in bytes.
+reflect the new length in bytes. The caller is responsible for arranging for
+the memory used by this string to get freed.
Upon successful return, the number of variants in the string can be computed by
having saved the value of C<*lenp> before the call, and subtracting it from the
append_utf8_from_native_byte(*s, &d);
s++;
}
+
*d = '\0';
*lenp = d-dst;
+
+ /* Trim unused space */
+ Renew(dst, *lenp + 1, U8);
+
return dst;
}
/*
- * Convert native (big-endian) or reversed (little-endian) UTF-16 to UTF-8.
+ * Convert native (big-endian) UTF-16 to UTF-8. For reversed (little-endian),
+ * use utf16_to_utf8_reversed().
+ *
+ * UTF-16 requires 2 bytes for every code point below 0x10000; otherwise 4 bytes.
+ * UTF-8 requires 1-3 bytes for every code point below 0x1000; otherwise 4 bytes.
+ * UTF-EBCDIC requires 1-4 bytes for every code point below 0x1000; otherwise 4-5 bytes.
*
- * Destination must be pre-extended to 3/2 source. Do not use in-place.
- * We optimize for native, for obvious reasons. */
+ * These functions don't check for overflow. The worst case is every code
+ * point in the input is 2 bytes, and requires 4 bytes on output. (If the code
+ * is never going to run in EBCDIC, it is 2 bytes requiring 3 on output.) Therefore the
+ * destination must be pre-extended to 2 times the source length.
+ *
+ * Do not use in-place. We optimize for native, for obvious reasons. */
U8*
Perl_utf16_to_utf8(pTHX_ U8* p, U8* d, I32 bytelen, I32 *newlen)
PERL_ARGS_ASSERT_UTF16_TO_UTF8;
if (bytelen & 1)
- Perl_croak(aTHX_ "panic: utf16_to_utf8: odd bytelen %" UVuf, (UV)bytelen);
+ Perl_croak(aTHX_ "panic: utf16_to_utf8: odd bytelen %" UVuf,
+ (UV)bytelen);
pend = p + bytelen;
*d++ = UTF8_TWO_BYTE_LO(UNI_TO_NATIVE(uv));
continue;
}
+
#define FIRST_HIGH_SURROGATE UNICODE_SURROGATE_FIRST
#define LAST_HIGH_SURROGATE 0xDBFF
#define FIRST_LOW_SURROGATE 0xDC00
#define LAST_LOW_SURROGATE UNICODE_SURROGATE_LAST
+#define FIRST_IN_PLANE1 0x10000
/* This assumes that most uses will be in the first Unicode plane, not
* needing surrogates */
}
p += 2;
uv = ((uv - FIRST_HIGH_SURROGATE) << 10)
- + (low - FIRST_LOW_SURROGATE) + 0x10000;
+ + (low - FIRST_LOW_SURROGATE) + FIRST_IN_PLANE1;
}
}
#ifdef EBCDIC
d = uvoffuni_to_utf8_flags(d, uv, 0);
#else
- if (uv < 0x10000) {
+ if (uv < FIRST_IN_PLANE1) {
*d++ = (U8)(( uv >> 12) | 0xe0);
*d++ = (U8)(((uv >> 6) & 0x3f) | 0x80);
*d++ = (U8)(( uv & 0x3f) | 0x80);
bool
Perl__is_uni_FOO(pTHX_ const U8 classnum, const UV c)
{
- U8 tmpbuf[UTF8_MAXBYTES+1];
- uvchr_to_utf8(tmpbuf, c);
- return _is_utf8_FOO_with_len(classnum, tmpbuf, tmpbuf + sizeof(tmpbuf));
+ return _invlist_contains_cp(PL_XPosix_ptrs[classnum], c);
}
/* Internal function so we can deprecate the external one, and call
if (*p == '_')
return TRUE;
- return is_utf8_common(p, &PL_utf8_idstart, "IdStart", NULL);
+ return is_utf8_common(p, NULL,
+ "This is buggy if this gets used",
+ PL_utf8_idstart);
}
bool
Perl__is_uni_perl_idcont(pTHX_ UV c)
{
- U8 tmpbuf[UTF8_MAXBYTES+1];
- uvchr_to_utf8(tmpbuf, c);
- return _is_utf8_perl_idcont_with_len(tmpbuf, tmpbuf + sizeof(tmpbuf));
+ return _invlist_contains_cp(PL_utf8_perl_idcont, c);
}
bool
Perl__is_uni_perl_idstart(pTHX_ UV c)
{
- U8 tmpbuf[UTF8_MAXBYTES+1];
- uvchr_to_utf8(tmpbuf, c);
- return _is_utf8_perl_idstart_with_len(tmpbuf, tmpbuf + sizeof(tmpbuf));
+ return _invlist_contains_cp(PL_utf8_perl_idstart, c);
}
UV
-Perl__to_upper_title_latin1(pTHX_ const U8 c, U8* p, STRLEN *lenp, const char S_or_s)
+Perl__to_upper_title_latin1(pTHX_ const U8 c, U8* p, STRLEN *lenp,
+ const char S_or_s)
{
/* We have the latin1-range values compiled into the core, so just use
* those, converting the result to UTF-8. The only difference between upper
return 'S';
#endif
default:
- Perl_croak(aTHX_ "panic: to_upper_title_latin1 did not expect '%c' to map to '%c'", c, LATIN_SMALL_LETTER_Y_WITH_DIAERESIS);
+ Perl_croak(aTHX_ "panic: to_upper_title_latin1 did not expect"
+ " '%c' to map to '%c'",
+ c, LATIN_SMALL_LETTER_Y_WITH_DIAERESIS);
NOT_REACHED; /* NOTREACHED */
}
}
return converted;
}
+/* If compiled on an early Unicode version, there may not be auxiliary tables
+ * */
+#ifndef HAS_UC_AUX_TABLES
+# define UC_AUX_TABLE_ptrs NULL
+# define UC_AUX_TABLE_lengths NULL
+#endif
+#ifndef HAS_TC_AUX_TABLES
+# define TC_AUX_TABLE_ptrs NULL
+# define TC_AUX_TABLE_lengths NULL
+#endif
+#ifndef HAS_LC_AUX_TABLES
+# define LC_AUX_TABLE_ptrs NULL
+# define LC_AUX_TABLE_lengths NULL
+#endif
+#ifndef HAS_CF_AUX_TABLES
+# define CF_AUX_TABLE_ptrs NULL
+# define CF_AUX_TABLE_lengths NULL
+#endif
+#ifndef HAS_UC_AUX_TABLES
+# define UC_AUX_TABLE_ptrs NULL
+# define UC_AUX_TABLE_lengths NULL
+#endif
+
/* Call the function to convert a UTF-8 encoded character to the specified case.
* Note that there may be more than one character in the result.
- * INP is a pointer to the first byte of the input character
- * OUTP will be set to the first byte of the string of changed characters. It
+ * 's' is a pointer to the first byte of the input character
+ * 'd' will be set to the first byte of the string of changed characters. It
* needs to have space for UTF8_MAXBYTES_CASE+1 bytes
- * LENP will be set to the length in bytes of the string of changed characters
+ * 'lenp' will be set to the length in bytes of the string of changed characters
*
- * The functions return the ordinal of the first character in the string of OUTP */
-#define CALL_UPPER_CASE(uv, s, d, lenp) _to_utf8_case(uv, s, d, lenp, &PL_utf8_toupper, "ToUc", "")
-#define CALL_TITLE_CASE(uv, s, d, lenp) _to_utf8_case(uv, s, d, lenp, &PL_utf8_totitle, "ToTc", "")
-#define CALL_LOWER_CASE(uv, s, d, lenp) _to_utf8_case(uv, s, d, lenp, &PL_utf8_tolower, "ToLc", "")
+ * The functions return the ordinal of the first character in the string of
+ * 'd' */
+#define CALL_UPPER_CASE(uv, s, d, lenp) \
+ _to_utf8_case(uv, s, d, lenp, PL_utf8_toupper, \
+ Uppercase_Mapping_invmap, \
+ UC_AUX_TABLE_ptrs, \
+ UC_AUX_TABLE_lengths, \
+ "uppercase")
+#define CALL_TITLE_CASE(uv, s, d, lenp) \
+ _to_utf8_case(uv, s, d, lenp, PL_utf8_totitle, \
+ Titlecase_Mapping_invmap, \
+ TC_AUX_TABLE_ptrs, \
+ TC_AUX_TABLE_lengths, \
+ "titlecase")
+#define CALL_LOWER_CASE(uv, s, d, lenp) \
+ _to_utf8_case(uv, s, d, lenp, PL_utf8_tolower, \
+ Lowercase_Mapping_invmap, \
+ LC_AUX_TABLE_ptrs, \
+ LC_AUX_TABLE_lengths, \
+ "lowercase")
+
/* This additionally has the input parameter 'specials', which if non-zero will
* cause this to use the specials hash for folding (meaning get full case
* folding); otherwise, when zero, this implies a simple case fold */
-#define CALL_FOLD_CASE(uv, s, d, lenp, specials) _to_utf8_case(uv, s, d, lenp, &PL_utf8_tofold, "ToCf", (specials) ? "" : NULL)
+#define CALL_FOLD_CASE(uv, s, d, lenp, specials) \
+ (specials) \
+ ? _to_utf8_case(uv, s, d, lenp, PL_utf8_tofold, \
+ Case_Folding_invmap, \
+ CF_AUX_TABLE_ptrs, \
+ CF_AUX_TABLE_lengths, \
+ "foldcase") \
+ : _to_utf8_case(uv, s, d, lenp, PL_utf8_tosimplefold, \
+ Simple_Case_Folding_invmap, \
+ NULL, NULL, \
+ "foldcase")
UV
Perl_to_uni_upper(pTHX_ UV c, U8* p, STRLEN *lenp)
}
UV
-Perl__to_fold_latin1(pTHX_ const U8 c, U8* p, STRLEN *lenp, const unsigned int flags)
+Perl__to_fold_latin1(const U8 c, U8* p, STRLEN *lenp, const unsigned int flags)
{
/* Corresponds to to_lower_latin1(); <flags> bits meanings:
* FOLD_FLAGS_NOMIX_ASCII iff non-ASCII to ASCII folds are prohibited
UV converted;
PERL_ARGS_ASSERT__TO_FOLD_LATIN1;
- PERL_UNUSED_CONTEXT;
assert (! (flags & FOLD_FLAGS_LOCALE));
PERL_ARGS_ASSERT__TO_UNI_FOLD_FLAGS;
if (flags & FOLD_FLAGS_LOCALE) {
- /* Treat a UTF-8 locale as not being in locale at all */
+ /* Treat a UTF-8 locale as not being in locale at all, except for
+ * potentially warning */
+ _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
if (IN_UTF8_CTYPE_LOCALE) {
flags &= ~FOLD_FLAGS_LOCALE;
}
else {
- _CHECK_AND_WARN_PROBLEMATIC_LOCALE;
goto needs_full_generality;
}
}
needs_full_generality:
uvchr_to_utf8(utf8_c, c);
- return _toFOLD_utf8_flags(utf8_c, utf8_c + sizeof(utf8_c), p, lenp, flags);
+ return _toFOLD_utf8_flags(utf8_c, utf8_c + sizeof(utf8_c),
+ p, lenp, flags);
}
}
NOT_REACHED; /* NOTREACHED */
}
+ if (invlist) {
+ return _invlist_contains_cp(invlist, valid_utf8_to_uvchr(p, NULL));
+ }
+
+ assert(swash);
+
if (!*swash) {
U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
*swash = _core_swash_init("utf8",
}
PERL_STATIC_INLINE bool
-S_is_utf8_common_with_len(pTHX_ const U8 *const p, const U8 * const e, SV **swash,
- const char *const swashname, SV* const invlist)
+S_is_utf8_common_with_len(pTHX_ const U8 *const p, const U8 * const e,
+ SV **swash, const char *const swashname,
+ SV* const invlist)
{
/* returns a boolean giving whether or not the UTF8-encoded character that
* starts at <p>, and extending no further than <e - 1> is in the swash
NOT_REACHED; /* NOTREACHED */
}
+ if (invlist) {
+ return _invlist_contains_cp(invlist, valid_utf8_to_uvchr(p, NULL));
+ }
+
+ assert(swash);
+
if (!*swash) {
U8 flags = _CORE_SWASH_INIT_ACCEPT_INVLIST;
*swash = _core_swash_init("utf8",
case _CC_CASED:
return is_utf8_common(p,
- &PL_utf8_swash_ptrs[classnum],
- swash_property_names[classnum],
+ NULL,
+ "This is buggy if this gets used",
PL_XPosix_ptrs[classnum]);
case _CC_SPACE:
case _CC_VERTSPACE:
return is_VERTWS_high(p);
case _CC_IDFIRST:
- if (! PL_utf8_perl_idstart) {
- PL_utf8_perl_idstart
- = _new_invlist_C_array(_Perl_IDStart_invlist);
- }
- return is_utf8_common(p, &PL_utf8_perl_idstart,
- "_Perl_IDStart", NULL);
+ return is_utf8_common(p, NULL,
+ "This is buggy if this gets used",
+ PL_utf8_perl_idstart);
case _CC_IDCONT:
- if (! PL_utf8_perl_idcont) {
- PL_utf8_perl_idcont
- = _new_invlist_C_array(_Perl_IDCont_invlist);
- }
- return is_utf8_common(p, &PL_utf8_perl_idcont,
- "_Perl_IDCont", NULL);
+ return is_utf8_common(p, NULL,
+ "This is buggy if this gets used",
+ PL_utf8_perl_idcont);
}
}
{
PERL_ARGS_ASSERT__IS_UTF8_FOO_WITH_LEN;
- assert(classnum < _FIRST_NON_SWASH_CC);
-
- return is_utf8_common_with_len(p,
- e,
- &PL_utf8_swash_ptrs[classnum],
- swash_property_names[classnum],
+ return is_utf8_common_with_len(p, e, NULL,
+ "This is buggy if this gets used",
PL_XPosix_ptrs[classnum]);
}
bool
Perl__is_utf8_perl_idstart_with_len(pTHX_ const U8 *p, const U8 * const e)
{
- SV* invlist = NULL;
-
PERL_ARGS_ASSERT__IS_UTF8_PERL_IDSTART_WITH_LEN;
- if (! PL_utf8_perl_idstart) {
- invlist = _new_invlist_C_array(_Perl_IDStart_invlist);
- }
- return is_utf8_common_with_len(p, e, &PL_utf8_perl_idstart,
- "_Perl_IDStart", invlist);
+ return is_utf8_common_with_len(p, e, NULL,
+ "This is buggy if this gets used",
+ PL_utf8_perl_idstart);
}
bool
bool
Perl__is_utf8_perl_idcont_with_len(pTHX_ const U8 *p, const U8 * const e)
{
- SV* invlist = NULL;
-
PERL_ARGS_ASSERT__IS_UTF8_PERL_IDCONT_WITH_LEN;
- if (! PL_utf8_perl_idcont) {
- invlist = _new_invlist_C_array(_Perl_IDCont_invlist);
- }
- return is_utf8_common_with_len(p, e, &PL_utf8_perl_idcont,
- "_Perl_IDCont", invlist);
+ return is_utf8_common_with_len(p, e, NULL,
+ "This is buggy if this gets used",
+ PL_utf8_perl_idcont);
}
bool
{
PERL_ARGS_ASSERT__IS_UTF8_XIDCONT;
- return is_utf8_common(p, &PL_utf8_idcont, "XIdContinue", NULL);
+ return is_utf8_common(p, &PL_utf8_xidcont, "XIdContinue", NULL);
}
bool
return is_utf8_common(p, &PL_utf8_mark, "IsM", NULL);
}
- /* change namve uv1 to 'from' */
STATIC UV
-S__to_utf8_case(pTHX_ const UV uv1, const U8 *p, U8* ustrp, STRLEN *lenp,
- SV **swashp, const char *normal, const char *special)
+S__to_utf8_case(pTHX_ const UV uv1, const U8 *p,
+ U8* ustrp, STRLEN *lenp,
+ SV *invlist, const int * const invmap,
+ const unsigned int * const * const aux_tables,
+ const U8 * const aux_table_lengths,
+ const char * const normal)
{
STRLEN len = 0;
+ /* Change the case of code point 'uv1' whose UTF-8 representation (assumed
+ * by this routine to be valid) begins at 'p'. 'normal' is a string to use
+ * to name the new case in any generated messages, as a fallback if the
+ * operation being used is not available. The new case is given by the
+ * data structures in the remaining arguments.
+ *
+ * On return 'ustrp' points to '*lenp' UTF-8 encoded bytes representing the
+ * entire changed case string, and the return value is the first code point
+ * in that string */
+
PERL_ARGS_ASSERT__TO_UTF8_CASE;
/* For code points that don't change case, we already know that the output
if (ckWARN_d(WARN_SURROGATE)) {
const char* desc = (PL_op) ? OP_DESC(PL_op) : normal;
Perl_warner(aTHX_ packWARN(WARN_SURROGATE),
- "Operation \"%s\" returns its argument for UTF-16 surrogate U+%04" UVXf, desc, uv1);
+ "Operation \"%s\" returns its argument for"
+ " UTF-16 surrogate U+%04" UVXf, desc, uv1);
}
goto cases_to_self;
}
* some others */
if (uv1 < 0xFB00) {
goto cases_to_self;
-
}
if (UNLIKELY(UNICODE_IS_SUPER(uv1))) {
- if (UNLIKELY(uv1 > MAX_NON_DEPRECATED_CP)) {
+ if (UNLIKELY(uv1 > MAX_EXTERNALLY_LEGAL_CP)) {
Perl_croak(aTHX_ cp_above_legal_max, uv1,
- MAX_NON_DEPRECATED_CP);
+ MAX_EXTERNALLY_LEGAL_CP);
}
if (ckWARN_d(WARN_NON_UNICODE)) {
const char* desc = (PL_op) ? OP_DESC(PL_op) : normal;
Perl_warner(aTHX_ packWARN(WARN_NON_UNICODE),
- "Operation \"%s\" returns its argument for non-Unicode code point 0x%04" UVXf, desc, uv1);
+ "Operation \"%s\" returns its argument for"
+ " non-Unicode code point 0x%04" UVXf, desc, uv1);
}
goto cases_to_self;
}
> HIGHEST_CASE_CHANGING_CP_FOR_USE_ONLY_BY_UTF8_DOT_C))
{
- /* As of this writing, this means we avoid swash creation
- * for anything beyond low Plane 1 */
+ /* As of Unicode 10.0, this means we avoid swash creation
+ * for anything beyond high Plane 1 (below emojis) */
goto cases_to_self;
}
#endif
}
/* Note that non-characters are perfectly legal, so no warning should
- * be given. There are so few of them, that it isn't worth the extra
- * tests to avoid swash creation */
+ * be given. */
}
- if (!*swashp) /* load on-demand */
- *swashp = _core_swash_init("utf8", normal, &PL_sv_undef, 4, 0, NULL, NULL);
+ {
+ unsigned int i;
+ const unsigned int * cp_list;
+ U8 * d;
+ SSize_t index = _invlist_search(invlist, uv1);
+ IV base = invmap[index];
- if (special) {
- /* It might be "special" (sometimes, but not always,
- * a multicharacter mapping) */
- HV *hv = NULL;
- SV **svp;
+ /* The data structures are set up so that if 'base' is non-negative,
+ * the case change is 1-to-1; and if 0, the change is to itself */
+ if (base >= 0) {
+ IV lc;
- /* If passed in the specials name, use that; otherwise use any
- * given in the swash */
- if (*special != '\0') {
- hv = get_hv(special, 0);
- }
- else {
- svp = hv_fetchs(MUTABLE_HV(SvRV(*swashp)), "SPECIALS", 0);
- if (svp) {
- hv = MUTABLE_HV(SvRV(*svp));
+ if (base == 0) {
+ goto cases_to_self;
}
- }
- if (hv
- && (svp = hv_fetch(hv, (const char*)p, UVCHR_SKIP(uv1), FALSE))
- && (*svp))
- {
- const char *s;
-
- s = SvPV_const(*svp, len);
- if (len == 1)
- /* EIGHTBIT */
- len = uvchr_to_utf8(ustrp, *(U8*)s) - ustrp;
- else {
- Copy(s, ustrp, len, U8);
- }
- }
- }
+ /* This computes, e.g. lc(H) as 'H - A + a', using the lc table */
+ lc = base + uv1 - invlist_array(invlist)[index];
+ *lenp = uvchr_to_utf8(ustrp, lc) - ustrp;
+ return lc;
+ }
- if (!len && *swashp) {
- const UV uv2 = swash_fetch(*swashp, p, TRUE /* => is UTF-8 */);
+ /* Here 'base' is negative. That means the mapping is 1-to-many, and
+ * requires an auxiliary table look up. abs(base) gives the index into
+ * a list of such tables which points to the proper aux table. And a
+ * parallel list gives the length of each corresponding aux table. */
+ cp_list = aux_tables[-base];
- if (uv2) {
- /* It was "normal" (a single character mapping). */
- len = uvchr_to_utf8(ustrp, uv2) - ustrp;
- }
- }
-
- if (len) {
- if (lenp) {
- *lenp = len;
+ /* Create the string of UTF-8 from the mapped-to code points */
+ d = ustrp;
+ for (i = 0; i < aux_table_lengths[-base]; i++) {
+ d = uvchr_to_utf8(d, cp_list[i]);
}
- return valid_utf8_to_uvchr(ustrp, 0);
+ *d = '\0';
+ *lenp = d - ustrp;
+
+ return cp_list[0];
}
/* Here, there was no mapping defined, which means that the code point maps
if (lenp)
*lenp = len;
- return uv1;
+ return uv1;
+
+}
+
+Size_t
+Perl__inverse_folds(pTHX_ const UV cp, unsigned int * first_folds_to,
+ const unsigned int ** remaining_folds_to)
+{
+ /* Returns the count of the number of code points that fold to the input
+ * 'cp' (besides itself).
+ *
+ * If the return is 0, there is nothing else that folds to it, and
+ * '*first_folds_to' is set to 0, and '*remaining_folds_to' is set to NULL.
+ *
+ * If the return is 1, '*first_folds_to' is set to the single code point,
+ * and '*remaining_folds_to' is set to NULL.
+ *
+ * Otherwise, '*first_folds_to' is set to a code point, and
+ * '*remaining_fold_to' is set to an array that contains the others. The
+ * length of this array is the returned count minus 1.
+ *
+ * The reason for this convolution is to avoid having to deal with
+ * allocating and freeing memory. The lists are already constructed, so
+ * the return can point to them, but single code points aren't, so would
+ * need to be constructed if we didn't employ something like this API */
+
+ SSize_t index = _invlist_search(PL_utf8_foldclosures, cp);
+ int base = _Perl_IVCF_invmap[index];
+
+ PERL_ARGS_ASSERT__INVERSE_FOLDS;
+
+ if (base == 0) { /* No fold */
+ *first_folds_to = 0;
+ *remaining_folds_to = NULL;
+ return 0;
+ }
+
+#ifndef HAS_IVCF_AUX_TABLES /* This Unicode version only has 1-1 folds */
+
+ assert(base > 0);
+
+#else
+
+ if (UNLIKELY(base < 0)) { /* Folds to more than one character */
+
+ /* The data structure is set up so that the absolute value of 'base' is
+ * an index into a table of pointers to arrays, with the array
+ * corresponding to the index being the list of code points that fold
+ * to 'cp', and the parallel array containing the length of the list
+ * array */
+ *first_folds_to = IVCF_AUX_TABLE_ptrs[-base][0];
+ *remaining_folds_to = IVCF_AUX_TABLE_ptrs[-base] + 1; /* +1 excludes
+ *first_folds_to
+ */
+ return IVCF_AUX_TABLE_lengths[-base];
+ }
+
+#endif
+ /* Only the single code point. This works like 'fc(G) = G - A + a' */
+ *first_folds_to = base + cp - invlist_array(PL_utf8_foldclosures)[index];
+ *remaining_folds_to = NULL;
+ return 1;
}
STATIC UV
-S_check_locale_boundary_crossing(pTHX_ const U8* const p, const UV result, U8* const ustrp, STRLEN *lenp)
+S_check_locale_boundary_crossing(pTHX_ const U8* const p, const UV result,
+ U8* const ustrp, STRLEN *lenp)
{
/* This is called when changing the case of a UTF-8-encoded character above
* the Latin1 range, and the operation is in a non-UTF-8 locale. If the
* p points to the original string whose case was changed; assumed
* by this routine to be well-formed
* result the code point of the first character in the changed-case string
- * ustrp points to the changed-case string (<result> represents its first char)
+ * ustrp points to the changed-case string (<result> represents its
+ * first char)
* lenp points to the length of <ustrp> */
UV original; /* To store the first code point of <p> */
assert(UTF8_IS_ABOVE_LATIN1(*p));
/* We know immediately if the first character in the string crosses the
- * boundary, so can skip */
+ * boundary, so can skip testing */
if (result > 255) {
/* Look at every character in the result; if any cross the
/* diag_listed_as: Can't do %s("%s") on non-UTF-8 locale; resolved to "%s". */
Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
- "Can't do %s(\"\\x{%" UVXf "}\") on non-UTF-8 locale; "
- "resolved to \"\\x{%" UVXf "}\".",
+ "Can't do %s(\"\\x{%" UVXf "}\") on non-UTF-8"
+ " locale; resolved to \"\\x{%" UVXf "}\".",
OP_DESC(PL_op),
original,
original);
L1_func_extra_param) \
\
if (flags & (locale_flags)) { \
+ _CHECK_AND_WARN_PROBLEMATIC_LOCALE; \
/* Treat a UTF-8 locale as not being in locale at all */ \
if (IN_UTF8_CTYPE_LOCALE) { \
flags &= ~(locale_flags); \
} \
- else { \
- _CHECK_AND_WARN_PROBLEMATIC_LOCALE; \
- } \
} \
\
if (UTF8_IS_INVARIANT(*p)) { \
} \
} \
else if UTF8_IS_NEXT_CHAR_DOWNGRADEABLE(p, e) { \
+ U8 c = EIGHT_BIT_UTF8_TO_NATIVE(*p, *(p+1)); \
if (flags & (locale_flags)) { \
- result = LC_L1_change_macro(EIGHT_BIT_UTF8_TO_NATIVE(*p, \
- *(p+1))); \
+ result = LC_L1_change_macro(c); \
} \
else { \
- return L1_func(EIGHT_BIT_UTF8_TO_NATIVE(*p, *(p+1)), \
- ustrp, lenp, L1_func_extra_param); \
+ return L1_func(c, ustrp, lenp, L1_func_extra_param); \
} \
} \
else { /* malformed UTF-8 or ord above 255 */ \
if (flags & FOLD_FLAGS_LOCALE) {
# define LONG_S_T LATIN_SMALL_LIGATURE_LONG_S_T_UTF8
- const unsigned int long_s_t_len = sizeof(LONG_S_T) - 1;
-
# ifdef LATIN_CAPITAL_LETTER_SHARP_S_UTF8
# define CAP_SHARP_S LATIN_CAPITAL_LETTER_SHARP_S_UTF8
- const unsigned int cap_sharp_s_len = sizeof(CAP_SHARP_S) - 1;
-
/* Special case these two characters, as what normally gets
* returned under locale doesn't work */
- if (UTF8SKIP(p) == cap_sharp_s_len
- && memEQ((char *) p, CAP_SHARP_S, cap_sharp_s_len))
+ if (memEQs((char *) p, UTF8SKIP(p), CAP_SHARP_S))
{
/* diag_listed_as: Can't do %s("%s") on non-UTF-8 locale; resolved to "%s". */
Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
}
else
#endif
- if (UTF8SKIP(p) == long_s_t_len
- && memEQ((char *) p, LONG_S_T, long_s_t_len))
+ if (memEQs((char *) p, UTF8SKIP(p), LONG_S_T))
{
/* diag_listed_as: Can't do %s("%s") on non-UTF-8 locale; resolved to "%s". */
Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
* 255/256 boundary which is forbidden under /l, and so the code
* wouldn't catch that they are equivalent (which they are only in
* this release) */
- else if (UTF8SKIP(p) == sizeof(DOTTED_I) - 1
- && memEQ((char *) p, DOTTED_I, sizeof(DOTTED_I) - 1))
- {
+ else if (memEQs((char *) p, UTF8SKIP(p), DOTTED_I)) {
/* diag_listed_as: Can't do %s("%s") on non-UTF-8 locale; resolved to "%s". */
Perl_ck_warner(aTHX_ packWARN(WARN_LOCALE),
"Can't do fc(\"\\x{0130}\") on non-UTF-8 locale; "
*/
SV*
-Perl_swash_init(pTHX_ const char* pkg, const char* name, SV *listsv, I32 minbits, I32 none)
+Perl_swash_init(pTHX_ const char* pkg, const char* name, SV *listsv,
+ I32 minbits, I32 none)
{
PERL_ARGS_ASSERT_SWASH_INIT;
* public interface, and returning a copy prevents others from doing
* mischief on the original */
- return newSVsv(_core_swash_init(pkg, name, listsv, minbits, none, NULL, NULL));
+ return newSVsv(_core_swash_init(pkg, name, listsv, minbits, none,
+ NULL, NULL));
}
SV*
-Perl__core_swash_init(pTHX_ const char* pkg, const char* name, SV *listsv, I32 minbits, I32 none, SV* invlist, U8* const flags_p)
+Perl__core_swash_init(pTHX_ const char* pkg, const char* name, SV *listsv,
+ I32 minbits, I32 none, SV* invlist,
+ U8* const flags_p)
{
/*NOTE NOTE NOTE - If you want to use "return" in this routine you MUST
SV* retval = &PL_sv_undef;
HV* swash_hv = NULL;
- const int invlist_swash_boundary =
- (flags_p && *flags_p & _CORE_SWASH_INIT_ACCEPT_INVLIST)
- ? 512 /* Based on some benchmarking, but not extensive, see commit
- message */
- : -1; /* Never return just an inversion list */
+ const bool use_invlist= (flags_p && *flags_p & _CORE_SWASH_INIT_ACCEPT_INVLIST);
assert(listsv != &PL_sv_undef || strNE(name, "") || invlist);
assert(! invlist || minbits == 1);
- PL_curpm= NULL; /* reset PL_curpm so that we dont get confused between the regex
- that triggered the swash init and the swash init perl logic itself.
- See perl #122747 */
+ PL_curpm= NULL; /* reset PL_curpm so that we dont get confused between the
+ regex that triggered the swash init and the swash init
+ perl logic itself. See perl #122747 */
/* If data was passed in to go out to utf8_heavy to find the swash of, do
* so */
/* Here, there is no swash already. Set up a minimal one, if
* we are going to return a swash */
- if ((int) _invlist_len(invlist) > invlist_swash_boundary) {
+ if (! use_invlist) {
swash_hv = newHV();
retval = newRV_noinc(MUTABLE_SV(swash_hv));
}
/* Here, we have computed the union of all the passed-in data. It may
* be that there was an inversion list in the swash which didn't get
* touched; otherwise save the computed one */
- if (! invlist_in_swash_is_valid
- && (int) _invlist_len(swash_invlist) > invlist_swash_boundary)
- {
+ if (! invlist_in_swash_is_valid && ! use_invlist) {
if (! hv_stores(MUTABLE_HV(SvRV(retval)), "V", swash_invlist))
{
Perl_croak(aTHX_ "panic: hv_store() unexpectedly failed");
/* The result is immutable. Forbid attempts to change it. */
SvREADONLY_on(swash_invlist);
- /* Use the inversion list stand-alone if small enough */
- if ((int) _invlist_len(swash_invlist) <= invlist_swash_boundary) {
+ if (use_invlist) {
SvREFCNT_dec(retval);
if (!swash_invlist_unclaimed)
SvREFCNT_inc_simple_void_NN(swash_invlist);
return swatch;
}
-HV*
-Perl__swash_inversion_hash(pTHX_ SV* const swash)
-{
-
- /* Subject to change or removal. For use only in regcomp.c and regexec.c
- * Can't be used on a property that is subject to user override, as it
- * relies on the value of SPECIALS in the swash which would be set by
- * utf8_heavy.pl to the hash in the non-overriden file, and hence is not set
- * for overridden properties
- *
- * Returns a hash which is the inversion and closure of a swash mapping.
- * For example, consider the input lines:
- * 004B 006B
- * 004C 006C
- * 212A 006B
- *
- * The returned hash would have two keys, the UTF-8 for 006B and the UTF-8 for
- * 006C. The value for each key is an array. For 006C, the array would
- * have two elements, the UTF-8 for itself, and for 004C. For 006B, there
- * would be three elements in its array, the UTF-8 for 006B, 004B and 212A.
- *
- * Note that there are no elements in the hash for 004B, 004C, 212A. The
- * keys are only code points that are folded-to, so it isn't a full closure.
- *
- * Essentially, for any code point, it gives all the code points that map to
- * it, or the list of 'froms' for that point.
- *
- * Currently it ignores any additions or deletions from other swashes,
- * looking at just the main body of the swash, and if there are SPECIALS
- * in the swash, at that hash
- *
- * The specials hash can be extra code points, and most likely consists of
- * maps from single code points to multiple ones (each expressed as a string
- * of UTF-8 characters). This function currently returns only 1-1 mappings.
- * However consider this possible input in the specials hash:
- * "\xEF\xAC\x85" => "\x{0073}\x{0074}", # U+FB05 => 0073 0074
- * "\xEF\xAC\x86" => "\x{0073}\x{0074}", # U+FB06 => 0073 0074
- *
- * Both FB05 and FB06 map to the same multi-char sequence, which we don't
- * currently handle. But it also means that FB05 and FB06 are equivalent in
- * a 1-1 mapping which we should handle, and this relationship may not be in
- * the main table. Therefore this function examines all the multi-char
- * sequences and adds the 1-1 mappings that come out of that.
- *
- * XXX This function was originally intended to be multipurpose, but its
- * only use is quite likely to remain for constructing the inversion of
- * the CaseFolding (//i) property. If it were more general purpose for
- * regex patterns, it would have to do the FB05/FB06 game for simple folds,
- * because certain folds are prohibited under /iaa and /il. As an example,
- * in Unicode 3.0.1 both U+0130 and U+0131 fold to 'i', and hence are both
- * equivalent under /i. But under /iaa and /il, the folds to 'i' are
- * prohibited, so we would not figure out that they fold to each other.
- * Code could be written to automatically figure this out, similar to the
- * code that does this for multi-character folds, but this is the only case
- * where something like this is ever likely to happen, as all the single
- * char folds to the 0-255 range are now quite settled. Instead there is a
- * little special code that is compiled only for this Unicode version. This
- * is smaller and didn't require much coding time to do. But this makes
- * this routine strongly tied to being used just for CaseFolding. If ever
- * it should be generalized, this would have to be fixed */
-
- U8 *l, *lend;
- STRLEN lcur;
- HV *const hv = MUTABLE_HV(SvRV(swash));
-
- /* The string containing the main body of the table. This will have its
- * assertion fail if the swash has been converted to its inversion list */
- SV** const listsvp = hv_fetchs(hv, "LIST", FALSE);
-
- SV** const typesvp = hv_fetchs(hv, "TYPE", FALSE);
- SV** const bitssvp = hv_fetchs(hv, "BITS", FALSE);
- SV** const nonesvp = hv_fetchs(hv, "NONE", FALSE);
- /*SV** const extssvp = hv_fetchs(hv, "EXTRAS", FALSE);*/
- const U8* const typestr = (U8*)SvPV_nolen(*typesvp);
- const STRLEN bits = SvUV(*bitssvp);
- const STRLEN octets = bits >> 3; /* if bits == 1, then octets == 0 */
- const UV none = SvUV(*nonesvp);
- SV **specials_p = hv_fetchs(hv, "SPECIALS", 0);
-
- HV* ret = newHV();
-
- PERL_ARGS_ASSERT__SWASH_INVERSION_HASH;
-
- /* Must have at least 8 bits to get the mappings */
- if (bits != 8 && bits != 16 && bits != 32) {
- Perl_croak(aTHX_ "panic: swash_inversion_hash doesn't expect bits %" UVuf,
- (UV)bits);
- }
-
- if (specials_p) { /* It might be "special" (sometimes, but not always, a
- mapping to more than one character */
-
- /* Construct an inverse mapping hash for the specials */
- HV * const specials_hv = MUTABLE_HV(SvRV(*specials_p));
- HV * specials_inverse = newHV();
- char *char_from; /* the lhs of the map */
- I32 from_len; /* its byte length */
- char *char_to; /* the rhs of the map */
- I32 to_len; /* its byte length */
- SV *sv_to; /* and in a sv */
- AV* from_list; /* list of things that map to each 'to' */
-
- hv_iterinit(specials_hv);
-
- /* The keys are the characters (in UTF-8) that map to the corresponding
- * UTF-8 string value. Iterate through the list creating the inverse
- * list. */
- while ((sv_to = hv_iternextsv(specials_hv, &char_from, &from_len))) {
- SV** listp;
- if (! SvPOK(sv_to)) {
- Perl_croak(aTHX_ "panic: value returned from hv_iternextsv() "
- "unexpectedly is not a string, flags=%lu",
- (unsigned long)SvFLAGS(sv_to));
- }
- /*DEBUG_U(PerlIO_printf(Perl_debug_log, "Found mapping from %" UVXf ", First char of to is %" UVXf "\n", valid_utf8_to_uvchr((U8*) char_from, 0), valid_utf8_to_uvchr((U8*) SvPVX(sv_to), 0)));*/
-
- /* Each key in the inverse list is a mapped-to value, and the key's
- * hash value is a list of the strings (each in UTF-8) that map to
- * it. Those strings are all one character long */
- if ((listp = hv_fetch(specials_inverse,
- SvPVX(sv_to),
- SvCUR(sv_to), 0)))
- {
- from_list = (AV*) *listp;
- }
- else { /* No entry yet for it: create one */
- from_list = newAV();
- if (! hv_store(specials_inverse,
- SvPVX(sv_to),
- SvCUR(sv_to),
- (SV*) from_list, 0))
- {
- Perl_croak(aTHX_ "panic: hv_store() unexpectedly failed");
- }
- }
-
- /* Here have the list associated with this 'to' (perhaps newly
- * created and empty). Just add to it. Note that we ASSUME that
- * the input is guaranteed to not have duplications, so we don't
- * check for that. Duplications just slow down execution time. */
- av_push(from_list, newSVpvn_utf8(char_from, from_len, TRUE));
- }
-
- /* Here, 'specials_inverse' contains the inverse mapping. Go through
- * it looking for cases like the FB05/FB06 examples above. There would
- * be an entry in the hash like
- * 'st' => [ FB05, FB06 ]
- * In this example we will create two lists that get stored in the
- * returned hash, 'ret':
- * FB05 => [ FB05, FB06 ]
- * FB06 => [ FB05, FB06 ]
- *
- * Note that there is nothing to do if the array only has one element.
- * (In the normal 1-1 case handled below, we don't have to worry about
- * two lists, as everything gets tied to the single list that is
- * generated for the single character 'to'. But here, we are omitting
- * that list, ('st' in the example), so must have multiple lists.) */
- while ((from_list = (AV *) hv_iternextsv(specials_inverse,
- &char_to, &to_len)))
- {
- if (av_tindex_skip_len_mg(from_list) > 0) {
- SSize_t i;
-
- /* We iterate over all combinations of i,j to place each code
- * point on each list */
- for (i = 0; i <= av_tindex_skip_len_mg(from_list); i++) {
- SSize_t j;
- AV* i_list = newAV();
- SV** entryp = av_fetch(from_list, i, FALSE);
- if (entryp == NULL) {
- Perl_croak(aTHX_ "panic: av_fetch() unexpectedly failed");
- }
- if (hv_fetch(ret, SvPVX(*entryp), SvCUR(*entryp), FALSE)) {
- Perl_croak(aTHX_ "panic: unexpected entry for %s", SvPVX(*entryp));
- }
- if (! hv_store(ret, SvPVX(*entryp), SvCUR(*entryp),
- (SV*) i_list, FALSE))
- {
- Perl_croak(aTHX_ "panic: hv_store() unexpectedly failed");
- }
-
- /* For DEBUG_U: UV u = valid_utf8_to_uvchr((U8*) SvPVX(*entryp), 0);*/
- for (j = 0; j <= av_tindex_skip_len_mg(from_list); j++) {
- entryp = av_fetch(from_list, j, FALSE);
- if (entryp == NULL) {
- Perl_croak(aTHX_ "panic: av_fetch() unexpectedly failed");
- }
-
- /* When i==j this adds itself to the list */
- av_push(i_list, newSVuv(utf8_to_uvchr_buf(
- (U8*) SvPVX(*entryp),
- (U8*) SvPVX(*entryp) + SvCUR(*entryp),
- 0)));
- /*DEBUG_U(PerlIO_printf(Perl_debug_log, "%s: %d: Adding %" UVXf " to list for %" UVXf "\n", __FILE__, __LINE__, valid_utf8_to_uvchr((U8*) SvPVX(*entryp), 0), u));*/
- }
- }
- }
- }
- SvREFCNT_dec(specials_inverse); /* done with it */
- } /* End of specials */
-
- /* read $swash->{LIST} */
-
-#if UNICODE_MAJOR_VERSION == 3 \
- && UNICODE_DOT_VERSION == 0 \
- && UNICODE_DOT_DOT_VERSION == 1
-
- /* For this version only U+130 and U+131 are equivalent under qr//i. Add a
- * rule so that things work under /iaa and /il */
-
- SV * mod_listsv = sv_mortalcopy(*listsvp);
- sv_catpv(mod_listsv, "130\t130\t131\n");
- l = (U8*)SvPV(mod_listsv, lcur);
-
-#else
-
- l = (U8*)SvPV(*listsvp, lcur);
-
-#endif
-
- lend = l + lcur;
-
- /* Go through each input line */
- while (l < lend) {
- UV min, max, val;
- UV inverse;
- l = swash_scan_list_line(l, lend, &min, &max, &val,
- cBOOL(octets), typestr);
- if (l > lend) {
- break;
- }
-
- /* Each element in the range is to be inverted */
- for (inverse = min; inverse <= max; inverse++) {
- AV* list;
- SV** listp;
- IV i;
- bool found_key = FALSE;
- bool found_inverse = FALSE;
-
- /* The key is the inverse mapping */
- char key[UTF8_MAXBYTES+1];
- char* key_end = (char *) uvchr_to_utf8((U8*) key, val);
- STRLEN key_len = key_end - key;
-
- /* Get the list for the map */
- if ((listp = hv_fetch(ret, key, key_len, FALSE))) {
- list = (AV*) *listp;
- }
- else { /* No entry yet for it: create one */
- list = newAV();
- if (! hv_store(ret, key, key_len, (SV*) list, FALSE)) {
- Perl_croak(aTHX_ "panic: hv_store() unexpectedly failed");
- }
- }
-
- /* Look through list to see if this inverse mapping already is
- * listed, or if there is a mapping to itself already */
- for (i = 0; i <= av_tindex_skip_len_mg(list); i++) {
- SV** entryp = av_fetch(list, i, FALSE);
- SV* entry;
- UV uv;
- if (entryp == NULL) {
- Perl_croak(aTHX_ "panic: av_fetch() unexpectedly failed");
- }
- entry = *entryp;
- uv = SvUV(entry);
- /*DEBUG_U(PerlIO_printf(Perl_debug_log, "list for %" UVXf " contains %" UVXf "\n", val, uv));*/
- if (uv == val) {
- found_key = TRUE;
- }
- if (uv == inverse) {
- found_inverse = TRUE;
- }
-
- /* No need to continue searching if found everything we are
- * looking for */
- if (found_key && found_inverse) {
- break;
- }
- }
-
- /* Make sure there is a mapping to itself on the list */
- if (! found_key) {
- av_push(list, newSVuv(val));
- /*DEBUG_U(PerlIO_printf(Perl_debug_log, "%s: %d: Adding %" UVXf " to list for %" UVXf "\n", __FILE__, __LINE__, val, val));*/
- }
-
-
- /* Simply add the value to the list */
- if (! found_inverse) {
- av_push(list, newSVuv(inverse));
- /*DEBUG_U(PerlIO_printf(Perl_debug_log, "%s: %d: Adding %" UVXf " to list for %" UVXf "\n", __FILE__, __LINE__, inverse, val));*/
- }
-
- /* swatch_get() increments the value of val for each element in the
- * range. That makes more compact tables possible. You can
- * express the capitalization, for example, of all consecutive
- * letters with a single line: 0061\t007A\t0041 This maps 0061 to
- * 0041, 0062 to 0042, etc. I (khw) have never understood 'none',
- * and it's not documented; it appears to be used only in
- * implementing tr//; I copied the semantics from swatch_get(), just
- * in case */
- if (!none || val < none) {
- ++val;
- }
- }
- }
-
- return ret;
-}
-
SV*
Perl__swash_to_invlist(pTHX_ SV* const swash)
{
/* The first number is a count of the rest */
l++;
if (!grok_atoUV((const char *)l, &elements, &after_atou)) {
- Perl_croak(aTHX_ "panic: Expecting a valid count of elements at start of inversion list");
+ Perl_croak(aTHX_ "panic: Expecting a valid count of elements"
+ " at start of inversion list");
}
if (elements == 0) {
invlist = _new_invlist(0);
else {
l = (U8 *) after_atou;
- /* Get the 0th element, which is needed to setup the inversion list */
+ /* Get the 0th element, which is needed to setup the inversion list
+ * */
while (isSPACE(*l)) l++;
+ after_atou = (char *) lend;
if (!grok_atoUV((const char *)l, &element0, &after_atou)) {
- Perl_croak(aTHX_ "panic: Expecting a valid 0th element for inversion list");
+ Perl_croak(aTHX_ "panic: Expecting a valid 0th element for"
+ " inversion list");
}
l = (U8 *) after_atou;
- invlist = _setup_canned_invlist(elements, element0, &other_elements_ptr);
+ invlist = _setup_canned_invlist(elements, element0,
+ &other_elements_ptr);
elements--;
/* Then just populate the rest of the input */
while (elements-- > 0) {
if (l > lend) {
- Perl_croak(aTHX_ "panic: Expecting %" UVuf " more elements than available", elements);
+ Perl_croak(aTHX_ "panic: Expecting %" UVuf " more"
+ " elements than available", elements);
}
while (isSPACE(*l)) l++;
- if (!grok_atoUV((const char *)l, other_elements_ptr++, &after_atou)) {
- Perl_croak(aTHX_ "panic: Expecting a valid element in inversion list");
+ after_atou = (char *) lend;
+ if (!grok_atoUV((const char *)l, other_elements_ptr++,
+ &after_atou))
+ {
+ Perl_croak(aTHX_ "panic: Expecting a valid element"
+ " in inversion list");
}
l = (U8 *) after_atou;
}
* size based on worst possible case, which is each line in the input
* creates 2 elements in the inversion list: 1) the beginning of a
* range in the list; 2) the beginning of a range not in the list. */
- while ((loc = (strchr(loc, '\n'))) != NULL) {
+ while ((loc = (char *) memchr(loc, '\n', lend - (U8 *) loc)) != NULL) {
elements += 2;
loc++;
}
Perl_check_utf8_print(pTHX_ const U8* s, const STRLEN len)
{
/* May change: warns if surrogates, non-character code points, or
- * non-Unicode code points are in s which has length len bytes. Returns
- * TRUE if none found; FALSE otherwise. The only other validity check is
- * to make sure that this won't exceed the string's length.
- *
- * Code points above the platform's C<IV_MAX> will raise a deprecation
- * warning, unless those are turned off. */
+ * non-Unicode code points are in 's' which has length 'len' bytes.
+ * Returns TRUE if none found; FALSE otherwise. The only other validity
+ * check is to make sure that this won't exceed the string's length nor
+ * overflow */
const U8* const e = s + len;
bool ok = TRUE;
if (UNLIKELY(isUTF8_POSSIBLY_PROBLEMATIC(*s))) {
if (UNLIKELY(UTF8_IS_SUPER(s, e))) {
if ( ckWARN_d(WARN_NON_UNICODE)
- || ( ckWARN_d(WARN_DEPRECATED)
-#ifndef UV_IS_QUAD
- && UNLIKELY(is_utf8_cp_above_31_bits(s, e))
-#else /* Below is 64-bit words */
- /* 2**63 and up meet these conditions provided we have
- * a 64-bit word. */
-# ifdef EBCDIC
- && *s == 0xFE
- && NATIVE_UTF8_TO_I8(s[1]) >= 0xA8
-# else
- && *s == 0xFF
- /* s[1] being above 0x80 overflows */
- && s[2] >= 0x88
-# endif
-#endif
- )) {
+ || UNLIKELY(0 < does_utf8_overflow(s, s + len,
+ 0 /* Don't consider overlongs */
+ )))
+ {
/* A side effect of this function will be to warn */
(void) utf8n_to_uvchr(s, e - s, NULL, UTF8_WARN_SUPER);
ok = FALSE;
* do for the non-chars and above-unicodes */
UV uv = utf8_to_uvchr_buf(s, e, NULL);
Perl_warner(aTHX_ packWARN(WARN_SURROGATE),
- "Unicode surrogate U+%04" UVXf " is illegal in UTF-8", uv);
+ "Unicode surrogate U+%04" UVXf " is illegal in UTF-8",
+ uv);
ok = FALSE;
}
}
- else if (UNLIKELY(UTF8_IS_NONCHAR(s, e)) && (ckWARN_d(WARN_NONCHAR))) {
+ else if ( UNLIKELY(UTF8_IS_NONCHAR(s, e))
+ && (ckWARN_d(WARN_NONCHAR)))
+ {
/* A side effect of this function will be to warn */
(void) utf8n_to_uvchr(s, e - s, NULL, UTF8_WARN_NONCHAR);
ok = FALSE;
=cut */
char *
-Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim, UV flags)
+Perl_pv_uni_display(pTHX_ SV *dsv, const U8 *spv, STRLEN len, STRLEN pvlim,
+ UV flags)
{
int truncated = 0;
const char *s, *e;
/*
=for apidoc foldEQ_utf8
-Returns true if the leading portions of the strings C<s1> and C<s2> (either or both
-of which may be in UTF-8) are the same case-insensitively; false otherwise.
-How far into the strings to compare is determined by other input parameters.
+Returns true if the leading portions of the strings C<s1> and C<s2> (either or
+both of which may be in UTF-8) are the same case-insensitively; false
+otherwise. How far into the strings to compare is determined by other input
+parameters.
If C<u1> is true, the string C<s1> is assumed to be in UTF-8-encoded Unicode;
-otherwise it is assumed to be in native 8-bit encoding. Correspondingly for C<u2>
-with respect to C<s2>.
-
-If the byte length C<l1> is non-zero, it says how far into C<s1> to check for fold
-equality. In other words, C<s1>+C<l1> will be used as a goal to reach. The
-scan will not be considered to be a match unless the goal is reached, and
-scanning won't continue past that goal. Correspondingly for C<l2> with respect to
-C<s2>.
-
-If C<pe1> is non-C<NULL> and the pointer it points to is not C<NULL>, that pointer is
-considered an end pointer to the position 1 byte past the maximum point
-in C<s1> beyond which scanning will not continue under any circumstances.
+otherwise it is assumed to be in native 8-bit encoding. Correspondingly for
+C<u2> with respect to C<s2>.
+
+If the byte length C<l1> is non-zero, it says how far into C<s1> to check for
+fold equality. In other words, C<s1>+C<l1> will be used as a goal to reach.
+The scan will not be considered to be a match unless the goal is reached, and
+scanning won't continue past that goal. Correspondingly for C<l2> with respect
+to C<s2>.
+
+If C<pe1> is non-C<NULL> and the pointer it points to is not C<NULL>, that
+pointer is considered an end pointer to the position 1 byte past the maximum
+point in C<s1> beyond which scanning will not continue under any circumstances.
(This routine assumes that UTF-8 encoded input strings are not malformed;
-malformed input can cause it to read past C<pe1>).
-This means that if both C<l1> and C<pe1> are specified, and C<pe1>
-is less than C<s1>+C<l1>, the match will never be successful because it can
-never
+malformed input can cause it to read past C<pe1>). This means that if both
+C<l1> and C<pe1> are specified, and C<pe1> is less than C<s1>+C<l1>, the match
+will never be successful because it can never
get as far as its goal (and in fact is asserted against). Correspondingly for
C<pe2> with respect to C<s2>.
* FOLDEQ_S2_FOLDS_SANE
*/
I32
-Perl_foldEQ_utf8_flags(pTHX_ const char *s1, char **pe1, UV l1, bool u1, const char *s2, char **pe2, UV l2, bool u2, U32 flags)
+Perl_foldEQ_utf8_flags(pTHX_ const char *s1, char **pe1, UV l1, bool u1,
+ const char *s2, char **pe2, UV l2, bool u2,
+ U32 flags)
{
const U8 *p1 = (const U8*)s1; /* Point to current char */
const U8 *p2 = (const U8*)s2;
{
PERL_ARGS_ASSERT_UVUNI_TO_UTF8;
- return Perl_uvoffuni_to_utf8_flags(aTHX_ d, uv, 0);
+ return uvoffuni_to_utf8_flags(d, uv, 0);
}
/*
return uvoffuni_to_utf8_flags(d, uv, flags);
}
+void
+Perl_init_uniprops(pTHX)
+{
+ /* Set up the inversion list global variables */
+
+ PL_XPosix_ptrs[_CC_ASCII] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_ASCII]);
+ PL_XPosix_ptrs[_CC_ALPHANUMERIC] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXALNUM]);
+ PL_XPosix_ptrs[_CC_ALPHA] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXALPHA]);
+ PL_XPosix_ptrs[_CC_BLANK] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXBLANK]);
+ PL_XPosix_ptrs[_CC_CASED] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_CASED]);
+ PL_XPosix_ptrs[_CC_CNTRL] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXCNTRL]);
+ PL_XPosix_ptrs[_CC_DIGIT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXDIGIT]);
+ PL_XPosix_ptrs[_CC_GRAPH] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXGRAPH]);
+ PL_XPosix_ptrs[_CC_LOWER] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXLOWER]);
+ PL_XPosix_ptrs[_CC_PRINT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXPRINT]);
+ PL_XPosix_ptrs[_CC_PUNCT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXPUNCT]);
+ PL_XPosix_ptrs[_CC_SPACE] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXSPACE]);
+ PL_XPosix_ptrs[_CC_UPPER] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXUPPER]);
+ PL_XPosix_ptrs[_CC_VERTSPACE] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_VERTSPACE]);
+ PL_XPosix_ptrs[_CC_WORDCHAR] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXWORD]);
+ PL_XPosix_ptrs[_CC_XDIGIT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_XPOSIXXDIGIT]);
+
+ PL_Posix_ptrs[_CC_ASCII] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_ASCII]);
+ PL_Posix_ptrs[_CC_ALPHANUMERIC] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXALNUM]);
+ PL_Posix_ptrs[_CC_ALPHA] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXALPHA]);
+ PL_Posix_ptrs[_CC_BLANK] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXBLANK]);
+ PL_Posix_ptrs[_CC_CASED] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_CASED]);
+ PL_Posix_ptrs[_CC_CNTRL] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXCNTRL]);
+ PL_Posix_ptrs[_CC_DIGIT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXDIGIT]);
+ PL_Posix_ptrs[_CC_GRAPH] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXGRAPH]);
+ PL_Posix_ptrs[_CC_LOWER] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXLOWER]);
+ PL_Posix_ptrs[_CC_PRINT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXPRINT]);
+ PL_Posix_ptrs[_CC_PUNCT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXPUNCT]);
+ PL_Posix_ptrs[_CC_SPACE] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXSPACE]);
+ PL_Posix_ptrs[_CC_UPPER] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXUPPER]);
+ PL_Posix_ptrs[_CC_VERTSPACE] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_VERTSPACE]);
+ PL_Posix_ptrs[_CC_WORDCHAR] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXWORD]);
+ PL_Posix_ptrs[_CC_XDIGIT] = _new_invlist_C_array(PL_uni_prop_ptrs[PL_POSIXXDIGIT]);
+
+ PL_GCB_invlist = _new_invlist_C_array(_Perl_GCB_invlist);
+ PL_SB_invlist = _new_invlist_C_array(_Perl_SB_invlist);
+ PL_WB_invlist = _new_invlist_C_array(_Perl_WB_invlist);
+ PL_LB_invlist = _new_invlist_C_array(_Perl_LB_invlist);
+ PL_SCX_invlist = _new_invlist_C_array(_Perl_SCX_invlist);
+
+ PL_AboveLatin1 = _new_invlist_C_array(AboveLatin1_invlist);
+ PL_Latin1 = _new_invlist_C_array(Latin1_invlist);
+ PL_UpperLatin1 = _new_invlist_C_array(UpperLatin1_invlist);
+
+ PL_Assigned_invlist = _new_invlist_C_array(PL_uni_prop_ptrs[PL_ASSIGNED]);
+
+ PL_utf8_perl_idstart = _new_invlist_C_array(PL_uni_prop_ptrs[PL__PERL_IDSTART]);
+ PL_utf8_perl_idcont = _new_invlist_C_array(PL_uni_prop_ptrs[PL__PERL_IDCONT]);
+
+ PL_utf8_charname_begin = _new_invlist_C_array(PL_uni_prop_ptrs[PL__PERL_CHARNAME_BEGIN]);
+ PL_utf8_charname_continue = _new_invlist_C_array(PL_uni_prop_ptrs[PL__PERL_CHARNAME_CONTINUE]);
+
+ PL_utf8_foldable = _new_invlist_C_array(PL_uni_prop_ptrs[PL__PERL_ANY_FOLDS]);
+ PL_HasMultiCharFold = _new_invlist_C_array(PL_uni_prop_ptrs[
+ PL__PERL_FOLDS_TO_MULTI_CHAR]);
+ PL_NonL1NonFinalFold = _new_invlist_C_array(
+ NonL1_Perl_Non_Final_Folds_invlist);
+
+ PL_utf8_toupper = _new_invlist_C_array(Uppercase_Mapping_invlist);
+ PL_utf8_tolower = _new_invlist_C_array(Lowercase_Mapping_invlist);
+ PL_utf8_totitle = _new_invlist_C_array(Titlecase_Mapping_invlist);
+ PL_utf8_tofold = _new_invlist_C_array(Case_Folding_invlist);
+ PL_utf8_tosimplefold = _new_invlist_C_array(Simple_Case_Folding_invlist);
+ PL_utf8_foldclosures = _new_invlist_C_array(_Perl_IVCF_invlist);
+}
+
+SV *
+Perl_parse_uniprop_string(pTHX_ const char * const name, const Size_t len, const bool to_fold, bool * invert)
+{
+ /* Parse the interior meat of \p{} passed to this in 'name' with length 'len',
+ * and return an inversion list if a property with 'name' is found, or NULL
+ * if not. 'name' point to the input with leading and trailing space trimmed.
+ * 'to_fold' indicates if /i is in effect.
+ *
+ * When the return is an inversion list, '*invert' will be set to a boolean
+ * indicating if it should be inverted or not
+ *
+ * This currently doesn't handle all cases. A NULL return indicates the
+ * caller should try a different approach
+ */
+
+ char* lookup_name;
+ bool stricter = FALSE;
+ bool is_nv_type = FALSE; /* nv= or numeric_value=, or possibly one
+ of the cjk numeric properties (though
+ it requires extra effort to compile
+ them) */
+ unsigned int i;
+ unsigned int j = 0, lookup_len;
+ int equals_pos = -1; /* Where the '=' is found, or negative if none */
+ int slash_pos = -1; /* Where the '/' is found, or negative if none */
+ int table_index = 0;
+ bool starts_with_In_or_Is = FALSE;
+ Size_t lookup_offset = 0;
+
+ PERL_ARGS_ASSERT_PARSE_UNIPROP_STRING;
+
+ /* The input will be modified into 'lookup_name' */
+ Newx(lookup_name, len, char);
+ SAVEFREEPV(lookup_name);
+
+ /* Parse the input. */
+ for (i = 0; i < len; i++) {
+ char cur = name[i];
+
+ /* These characters can be freely ignored in most situations. Later it
+ * may turn out we shouldn't have ignored them, and we have to reparse,
+ * but we don't have enough information yet to make that decision */
+ if (cur == '-' || cur == '_' || isSPACE(cur)) {
+ continue;
+ }
+
+ /* Case differences are also ignored. Our lookup routine assumes
+ * everything is lowercase */
+ if (isUPPER(cur)) {
+ lookup_name[j++] = toLOWER(cur);
+ continue;
+ }
+
+ /* A double colon is either an error, or a package qualifier to a
+ * subroutine user-defined property; neither of which do we currently
+ * handle
+ *
+ * But a single colon is a synonym for '=' */
+ if (cur == ':') {
+ if (i < len - 1 && name[i+1] == ':') {
+ return NULL;
+ }
+ cur = '=';
+ }
+
+ /* Otherwise, this character is part of the name. */
+ lookup_name[j++] = cur;
+
+ /* Only the equals sign needs further processing */
+ if (cur == '=') {
+ equals_pos = j; /* Note where it occurred in the input */
+ break;
+ }
+ }
+
+ /* Here, we are either done with the whole property name, if it was simple;
+ * or are positioned just after the '=' if it is compound. */
+
+ if (equals_pos >= 0) {
+ assert(! stricter); /* We shouldn't have set this yet */
+
+ /* Space immediately after the '=' is ignored */
+ i++;
+ for (; i < len; i++) {
+ if (! isSPACE(name[i])) {
+ break;
+ }
+ }
+
+ /* Certain properties need special handling. They may optionally be
+ * prefixed by 'is'. Ignore that prefix for the purposes of checking
+ * if this is one of those properties */
+ if (memBEGINPs(lookup_name, len, "is")) {
+ lookup_offset = 2;
+ }
+
+ /* Then check if it is one of these properties. This is hard-coded
+ * because easier this way, and the list is unlikely to change. There
+ * are several properties like this in the Unihan DB, which is unlikely
+ * to be compiled, and they all end with 'numeric'. The interiors
+ * aren't checked for the precise property. This would stop working if
+ * a cjk property were to be created that ended with 'numeric' and
+ * wasn't a numeric type */
+ is_nv_type = memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "numericvalue")
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "nv")
+ || ( memENDPs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "numeric")
+ && ( memBEGINPs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "cjk")
+ || memBEGINPs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "k")));
+ if ( is_nv_type
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "canonicalcombiningclass")
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "ccc")
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "age")
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "in")
+ || memEQs(lookup_name + lookup_offset,
+ j - 1 - lookup_offset, "presentin"))
+ {
+ unsigned int k;
+
+ /* What makes these properties special is that the stuff after the
+ * '=' is a number. Therefore, we can't throw away '-'
+ * willy-nilly, as those could be a minus sign. Other stricter
+ * rules also apply. However, these properties all can have the
+ * rhs not be a number, in which case they contain at least one
+ * alphabetic. In those cases, the stricter rules don't apply.
+ * But the numeric type properties can have the alphas [Ee] to
+ * signify an exponent, and it is still a number with stricter
+ * rules. So look for an alpha that signifys not-strict */
+ stricter = TRUE;
+ for (k = i; k < len; k++) {
+ if ( isALPHA(name[k])
+ && (! is_nv_type || ! isALPHA_FOLD_EQ(name[k], 'E')))
+ {
+ stricter = FALSE;
+ break;
+ }
+ }
+ }
+
+ if (stricter) {
+
+ /* A number may have a leading '+' or '-'. The latter is retained
+ * */
+ if (name[i] == '+') {
+ i++;
+ }
+ else if (name[i] == '-') {
+ lookup_name[j++] = '-';
+ i++;
+ }
+
+ /* Skip leading zeros including single underscores separating the
+ * zeros, or between the final leading zero and the first other
+ * digit */
+ for (; i < len - 1; i++) {
+ if ( name[i] != '0'
+ && (name[i] != '_' || ! isDIGIT(name[i+1])))
+ {
+ break;
+ }
+ }
+ }
+ }
+ else { /* No '=' */
+
+ /* We are now in a position to determine if this property should have
+ * been parsed using stricter rules. Only a few are like that, and
+ * unlikely to change. */
+ if ( memBEGINPs(lookup_name, j, "perl")
+ && memNEs(lookup_name + 4, j - 4, "space")
+ && memNEs(lookup_name + 4, j - 4, "word"))
+ {
+ stricter = TRUE;
+
+ /* We set the inputs back to 0 and the code below will reparse,
+ * using strict */
+ i = j = 0;
+ }
+ }
+
+ /* Here, we have either finished the property, or are positioned to parse
+ * the remainder, and we know if stricter rules apply. Finish out, if not
+ * already done */
+ for (; i < len; i++) {
+ char cur = name[i];
+
+ /* In all instances, case differences are ignored, and we normalize to
+ * lowercase */
+ if (isUPPER(cur)) {
+ lookup_name[j++] = toLOWER(cur);
+ continue;
+ }
+
+ /* An underscore is skipped, but not under strict rules unless it
+ * separates two digits */
+ if (cur == '_') {
+ if ( stricter
+ && ( i == 0 || (int) i == equals_pos || i == len- 1
+ || ! isDIGIT(name[i-1]) || ! isDIGIT(name[i+1])))
+ {
+ lookup_name[j++] = '_';
+ }
+ continue;
+ }
+
+ /* Hyphens are skipped except under strict */
+ if (cur == '-' && ! stricter) {
+ continue;
+ }
+
+ /* XXX Bug in documentation. It says white space skipped adjacent to
+ * non-word char. Maybe we should, but shouldn't skip it next to a dot
+ * in a number */
+ if (isSPACE(cur) && ! stricter) {
+ continue;
+ }
+
+ lookup_name[j++] = cur;
+
+ /* Unless this is a non-trailing slash, we are done with it */
+ if (i >= len - 1 || cur != '/') {
+ continue;
+ }
+
+ slash_pos = j;
+
+ /* A slash in the 'numeric value' property indicates that what follows
+ * is a denominator. It can have a leading '+' and '0's that should be
+ * skipped. But we have never allowed a negative denominator, so treat
+ * a minus like every other character. (No need to rule out a second
+ * '/', as that won't match anything anyway */
+ if (is_nv_type) {
+ i++;
+ if (i < len && name[i] == '+') {
+ i++;
+ }
+
+ /* Skip leading zeros including underscores separating digits */
+ for (; i < len - 1; i++) {
+ if ( name[i] != '0'
+ && (name[i] != '_' || ! isDIGIT(name[i+1])))
+ {
+ break;
+ }
+ }
+
+ /* Store the first real character in the denominator */
+ lookup_name[j++] = name[i];
+ }
+ }
+
+ /* Here are completely done parsing the input 'name', and 'lookup_name'
+ * contains a copy, normalized.
+ *
+ * This special case is grandfathered in: 'L_' and 'GC=L_' are accepted and
+ * different from without the underscores. */
+ if ( ( UNLIKELY(memEQs(lookup_name, j, "l"))
+ || UNLIKELY(memEQs(lookup_name, j, "gc=l")))
+ && UNLIKELY(name[len-1] == '_'))
+ {
+ lookup_name[j++] = '&';
+ }
+ else if (len > 2 && name[0] == 'I' && ( name[1] == 'n' || name[1] == 's'))
+ {
+
+ /* Also, if the original input began with 'In' or 'Is', it could be a
+ * subroutine call instead of a property names, which currently isn't
+ * handled by this function. Subroutine calls can't happen if there is
+ * an '=' in the name */
+ if (equals_pos < 0 && get_cvn_flags(name, len, GV_NOTQUAL) != NULL) {
+ return NULL;
+ }
+
+ starts_with_In_or_Is = TRUE;
+ }
+
+ lookup_len = j; /* Use a more mnemonic name starting here */
+
+ /* Get the index into our pointer table of the inversion list corresponding
+ * to the property */
+ table_index = match_uniprop((U8 *) lookup_name, lookup_len);
+
+ /* If it didn't find the property */
+ if (table_index == 0) {
+
+ /* If didn't find the property, we try again stripping off any initial
+ * 'In' or 'Is' */
+ if (starts_with_In_or_Is) {
+ lookup_name += 2;
+ lookup_len -= 2;
+ equals_pos -= 2;
+ slash_pos -= 2;
+
+ table_index = match_uniprop((U8 *) lookup_name, lookup_len);
+ }
+
+ if (table_index == 0) {
+ char * canonical;
+
+ /* If not found, and not a numeric type property, isn't a legal
+ * property */
+ if (! is_nv_type) {
+ return NULL;
+ }
+
+ /* But the numeric type properties need more work to decide. What
+ * we do is make sure we have the number in canonical form and look
+ * that up. */
+
+ if (slash_pos < 0) { /* No slash */
+
+ /* When it isn't a rational, take the input, convert it to a
+ * NV, then create a canonical string representation of that
+ * NV. */
+
+ NV value;
+
+ /* Get the value */
+ if (my_atof3(lookup_name + equals_pos, &value,
+ lookup_len - equals_pos)
+ != lookup_name + lookup_len)
+ {
+ return NULL;
+ }
+
+ /* If the value is an integer, the canonical value is integral */
+ if (Perl_ceil(value) == value) {
+ canonical = Perl_form(aTHX_ "%.*s%.0" NVff,
+ equals_pos, lookup_name, value);
+ }
+ else { /* Otherwise, it is %e with a known precision */
+ canonical = Perl_form(aTHX_ "%.*s%.*" NVef,
+ equals_pos, lookup_name,
+ PL_E_FORMAT_PRECISION, value);
+ }
+ }
+ else { /* Has a slash. Create a rational in canonical form */
+ UV numerator, denominator, gcd, trial;
+ const char * end_ptr;
+ const char * sign = "";
+
+ /* We can't just find the numerator, denominator, and do the
+ * division, then use the method above, because that is
+ * inexact. And the input could be a rational that is within
+ * epsilon (given our precision) of a valid rational, and would
+ * then incorrectly compare valid.
+ *
+ * We're only interested in the part after the '=' */
+ const char * this_lookup_name = lookup_name + equals_pos;
+ lookup_len -= equals_pos;
+ slash_pos -= equals_pos;
+
+ /* Handle any leading minus */
+ if (this_lookup_name[0] == '-') {
+ sign = "-";
+ this_lookup_name++;
+ lookup_len--;
+ slash_pos--;
+ }
+
+ /* Convert the numerator to numeric */
+ end_ptr = this_lookup_name + slash_pos;
+ if (! grok_atoUV(this_lookup_name, &numerator, &end_ptr)) {
+ return NULL;
+ }
+
+ /* It better have included all characters before the slash */
+ if (*end_ptr != '/') {
+ return NULL;
+ }
+
+ /* Set to look at just the denominator */
+ this_lookup_name += slash_pos;
+ lookup_len -= slash_pos;
+ end_ptr = this_lookup_name + lookup_len;
+
+ /* Convert the denominator to numeric */
+ if (! grok_atoUV(this_lookup_name, &denominator, &end_ptr)) {
+ return NULL;
+ }
+
+ /* It better be the rest of the characters, and don't divide by
+ * 0 */
+ if ( end_ptr != this_lookup_name + lookup_len
+ || denominator == 0)
+ {
+ return NULL;
+ }
+
+ /* Get the greatest common denominator using
+ http://en.wikipedia.org/wiki/Euclidean_algorithm */
+ gcd = numerator;
+ trial = denominator;
+ while (trial != 0) {
+ UV temp = trial;
+ trial = gcd % trial;
+ gcd = temp;
+ }
+
+ /* If already in lowest possible terms, we have already tried
+ * looking this up */
+ if (gcd == 1) {
+ return NULL;
+ }
+
+ /* Reduce the rational, which should put it in canonical form.
+ * Then look it up */
+ numerator /= gcd;
+ denominator /= gcd;
+
+ canonical = Perl_form(aTHX_ "%.*s%s%" UVuf "/%" UVuf,
+ equals_pos, lookup_name, sign, numerator, denominator);
+ }
+
+ /* Here, we have the number in canonical form. Try that */
+ table_index = match_uniprop((U8 *) canonical, strlen(canonical));
+ if (table_index == 0) {
+ return NULL;
+ }
+ }
+ }
+
+ /* The return is an index into a table of ptrs. A negative return
+ * signifies that the real index is the absolute value, but the result
+ * needs to be inverted */
+ if (table_index < 0) {
+ *invert = TRUE;
+ table_index = -table_index;
+ }
+ else {
+ *invert = FALSE;
+ }
+
+ /* Out-of band indices indicate a deprecated property. The proper index is
+ * modulo it with the table size. And dividing by the table size yields
+ * an offset into a table constructed to contain the corresponding warning
+ * message */
+ if (table_index > MAX_UNI_KEYWORD_INDEX) {
+ Size_t warning_offset = table_index / MAX_UNI_KEYWORD_INDEX;
+ table_index %= MAX_UNI_KEYWORD_INDEX;
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_DEPRECATED),
+ "Use of '%.*s' in \\p{} or \\P{} is deprecated because: %s",
+ (int) len, name, deprecated_property_msgs[warning_offset]);
+ }
+
+ /* In a few properties, a different property is used under /i. These are
+ * unlikely to change, so are hard-coded here. */
+ if (to_fold) {
+ if ( table_index == PL_XPOSIXUPPER
+ || table_index == PL_XPOSIXLOWER
+ || table_index == PL_TITLE)
+ {
+ table_index = PL_CASED;
+ }
+ else if ( table_index == PL_UPPERCASELETTER
+ || table_index == PL_LOWERCASELETTER
+#ifdef PL_TITLECASELETTER /* Missing from early Unicodes */
+ || table_index == PL_TITLECASELETTER
+#endif
+ ) {
+ table_index = PL_CASEDLETTER;
+ }
+ else if ( table_index == PL_POSIXUPPER
+ || table_index == PL_POSIXLOWER)
+ {
+ table_index = PL_POSIXALPHA;
+ }
+ }
+
+ /* Create and return the inversion list */
+ return _new_invlist_C_array(PL_uni_prop_ptrs[table_index]);
+}
+
+/*
+=for apidoc utf8_to_uvchr
+
+Returns the native code point of the first character in the string C<s>
+which is assumed to be in UTF-8 encoding; C<retlen> will be set to the
+length, in bytes, of that character.
+
+Some, but not all, UTF-8 malformations are detected, and in fact, some
+malformed input could cause reading beyond the end of the input buffer, which
+is why this function is deprecated. Use L</utf8_to_uvchr_buf> instead.
+
+If C<s> points to one of the detected malformations, and UTF8 warnings are
+enabled, zero is returned and C<*retlen> is set (if C<retlen> isn't
+C<NULL>) to -1. If those warnings are off, the computed value if well-defined (or
+the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and C<*retlen>
+is set (if C<retlen> isn't NULL) so that (S<C<s> + C<*retlen>>) is the
+next possible position in C<s> that could begin a non-malformed character.
+See L</utf8n_to_uvchr> for details on when the REPLACEMENT CHARACTER is returned.
+
+=cut
+*/
+
+UV
+Perl_utf8_to_uvchr(pTHX_ const U8 *s, STRLEN *retlen)
+{
+ PERL_ARGS_ASSERT_UTF8_TO_UVCHR;
+
+ return utf8_to_uvchr_buf(s, s + UTF8_MAXBYTES, retlen);
+}
+
/*
* ex: set ts=8 sts=4 sw=4 et:
*/