pldlflags="$cccdlflags"
static_ldflags=''
case "${osname}${osvers}" in
- next4*)
- ld=libtool
- lddlflags="-dynamic -undefined warning -framework System \
- -compatibility_version 1 -current_version $patchlevel \
- -prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
- ;;
darwin*)
shrpldflags="${ldflags} -dynamiclib \
-compatibility_version \
${api_revision}.${api_version}.${api_subversion} \
-current_version \
- ${revision}.${patchlevel}.${subversion} \
- -install_name \$(shrpdir)/\$@"
+ ${revision}.${patchlevel}.${subversion}"
+ case "$osvers" in
+ 1[5-9]*|[2-9]*)
+ shrpldflags="$shrpldflags -install_name `pwd`/\$@ -Xlinker -headerpad_max_install_names"
+ exeldflags="-Xlinker -headerpad_max_install_names"
+ ;;
+ *)
+ shrpldflags="$shrpldflags -install_name \$(shrpdir)/\$@"
+ ;;
+ esac
;;
cygwin*)
- shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a -Wl,--image-base,0x52000000"
+ shrpldflags="$shrpldflags -Wl,--out-implib=libperl.dll.a"
linklibperl="-L. -lperl"
;;
sunos*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
os390*)
- shrpldflags='-W l,XPLINK,dll'
- linklibperl='libperl.x'
- DPERL_EXTERNAL_GLOB=''
- ;;
+ case "$use64bitall" in
+ define|true|[yY]*) shrpldflags='-Wl,LP64,dll'
+ linklibperl='libperl.x'
+ ;;
+ *) shrpldflags='-Wl,XPLINK,dll'
+ linklibperl='libperl.x'
+ ;;
+ esac
+ ;;
esac
case "$ldlibpthname" in
'') ;;
;;
esac
+# ccdlflags, not to be confused with cccdlflags:
+case "${osname}" in
+aix)
+ # In AIX we need to change this for building Perl itself from
+ # the config.sh definition (which is for building external
+ # extensions *after* Perl has been built and installed)
+ ccdlflags=`echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
+ ;;
+esac
+
: is Cwd static or dynamic
static_cwd='define'
list_util_dep='$(PERL_EXE)'
for f in $dynamic_ext; do
case $f in
Cwd) static_cwd='undef' ;;
- List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext
+ List/Util) list_util_dep=lib/auto/List/Util/Util.$dlext ;;
esac
done
-: Prepare dependency lists for Makefile.
+: Prepare dependency lists for Makefile. Non-Unix systems likely will also
+: require changes in make_ext.pl
dynamic_list=' '
dynamic_ext_re="lib/auto/re/re.$dlext"
extra_dep='
+cpan/Pod-Simple/pm_to_blib: dist/if/pm_to_blib
ext/Pod-Functions/pm_to_blib: cpan/Pod-Simple/pm_to_blib cpan/Pod-Escapes/pm_to_blib pod/perlfunc.pod
+cpan/IO-Compress/pm_to_blib: dist/lib/pm_to_blib
'
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
- this_target="lib/auto/$f/$base.$dlext"
+ this_target="lib/auto/$f/$base.$dlext"
dynamic_list="$dynamic_list $this_target"
: Parallel makes reveal that we have some interdependencies
CPS = $cp
RMS = rm -f
ranlib = $ranlib
+ECHO = $echo
# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
-LLIBPERL_NONSHR= $linklibperl_nonshr
SHRPENV = $shrpenv
# Static targets are ordinarily built without CCCDLFLAGS. However,
EXE_EXT = $_exe
LIB_EXT = $_a
OBJ_EXT = $_o
-PATH_SEP = $p_
# Macros to invoke a copy of miniperl during the build. Targets which
# are built using these macros should depend on \$(MINIPERL_EXE)
!GROK!THIS!
+case "$useshrplib$osname" in
+truedarwin)
+ $spitshell >>$Makefile <<!GROK!THIS!
+PERL_EXE_LDFLAGS=$exeldflags
+!GROK!THIS!
+ ;;
+esac
+
case "$usecrosscompile$perl" in
define?*)
$spitshell >>$Makefile <<!GROK!THIS!
;;
esac
+case "$dtracexnolibs" in
+define) xnolibs=-xnolibs ;;
+*) xnolibs= ;;
+esac
+
$spitshell >>$Makefile <<!GROK!THIS!
-DTRACE = $dtrace
+DTRACE = $dtrace $xnolibs
DTRACE_H = $dtrace_h
DTRACE_PERLLIB_O = $dtrace_perllib_o # "dtrace -G" output for perllib_objs
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
-.SUFFIXES: .c \$(OBJ_EXT) .i .s
+.SUFFIXES: .c \$(OBJ_EXT) .i .s .c.depends
# grrr
SHELL = $sh
shextract = $shextract
!GROK!THIS!
+# Source files where we build a variant for miniperl:
+mini_special='op perl universal'
+for file in $mini_special; do
+ mini_special_c="$mini_special_c ${file}mini.c"
+ mini_only_objs="$mini_only_objs ${file}mini\$(OBJ_EXT)"
+ main_only_objs="$main_only_objs ${file}\$(OBJ_EXT)"
+ ctags_exclude="$ctags_exclude --exclude=${file}mini.c"
+done
+
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-addedbyconf = UU $(shextract) pstruct
+addedbyconf = UU $(shextract)
# Unicode data files generated by mktables
unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
# Directories of Unicode data files generated by mktables
unidatadirs = lib/unicore/To lib/unicore/lib
-h1 = EXTERN.h INTERN.h XSUB.h av.h $(CONFIGH) cop.h cv.h dosish.h
-h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h
-h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
-h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h mydtrace.h op_reg_common.h l1_char_class_tab.h
-h6 = charclass_invlists.h
-h = $(h1) $(h2) $(h3) $(h4) $(h5) $(h6)
+h = \
+ EXTERN.h INTERN.h XSUB.h \
+ av.h charclass_invlists.h cop.h cv.h dosish.h embed.h form.h gv.h \
+ handy.h hv.h hv_func.h iperlsys.h keywords.h l1_char_class_tab.h \
+ mg.h mydtrace.h op.h op_reg_common.h opcode.h pad.h patchlevel.h \
+ perl.h perlapi.h perly.h pp.h proto.h regcomp.h regcomp_internal.h \
+ regexp.h scope.h sv.h thread.h unixish.h utf8.h util.h warnings.h \
+ $(CONFIGH)
+
+c_base = \
+ av.c builtin.c caretx.c class.c deb.c doio.c doop.c dquote.c dump.c \
+ globals.c gv.c hv.c keywords.c locale.c mathoms.c mg.c mro_core.c \
+ numeric.c op.c pad.c peep.c perl.c perlio.c perly.c \
+ pp.c pp_ctl.c pp_hot.c pp_pack.c pp_sort.c pp_sys.c \
+ reentr.c regcomp.c regcomp_debug.c regcomp_invlist.c regcomp_study.c \
+ regcomp_trie.c regexec.c run.c scope.c sv.c taint.c time64.c toke.c \
+ universal.c utf8.c util.c \
+ $(mallocsrc)
-c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c
-c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
-c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c dquote.c time64.c
-c5 = $(mallocsrc)
+!NO!SUBS!
-c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c opmini.c perlmini.c
+$spitshell >>$Makefile <<!GROK!THIS!
+mini_only_src =$mini_special_c
+mini_only_objs =$mini_only_objs
+main_only_objs =$main_only_objs
+!GROK!THIS!
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT) keywords$(OBJ_EXT)
-obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) caretx$(OBJ_EXT) dquote$(OBJ_EXT) time64$(OBJ_EXT)
+$spitshell >>$Makefile <<'!NO!SUBS!'
+
+c = $(c_base) miniperlmain.c $(mini_only_src)
# split the objects into 3 exclusive sets: those used by both miniperl and
# perl, and those used by just one or the other. Doesn't include the
# actual perl(mini)main.o, nor any dtrace objects.
-common_objs = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-mini_only_objs = opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
-main_only_objs = op$(OBJ_EXT) perl$(OBJ_EXT)
+common_objs = \
+ av$(OBJ_EXT) builtin$(OBJ_EXT) caretx$(OBJ_EXT) class$(OBJ_EXT) \
+ deb$(OBJ_EXT) doio$(OBJ_EXT) doop$(OBJ_EXT) dquote$(OBJ_EXT) \
+ dump$(OBJ_EXT) globals$(OBJ_EXT) gv$(OBJ_EXT) hv$(OBJ_EXT) \
+ keywords$(OBJ_EXT) locale$(OBJ_EXT) mathoms$(OBJ_EXT) mg$(OBJ_EXT) \
+ mro_core$(OBJ_EXT) numeric$(OBJ_EXT) pad$(OBJ_EXT) peep$(OBJ_EXT) \
+ perlio$(OBJ_EXT) perly$(OBJ_EXT) pp$(OBJ_EXT) pp_ctl$(OBJ_EXT) \
+ pp_hot$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) pp_sys$(OBJ_EXT) \
+ reentr$(OBJ_EXT) regcomp$(OBJ_EXT) regcomp_debug$(OBJ_EXT) \
+ regcomp_invlist$(OBJ_EXT) regcomp_study$(OBJ_EXT) regcomp_trie$(OBJ_EXT) \
+ regexec$(OBJ_EXT) run$(OBJ_EXT) scope$(OBJ_EXT) sv$(OBJ_EXT) \
+ taint$(OBJ_EXT) time64$(OBJ_EXT) toke$(OBJ_EXT) utf8$(OBJ_EXT) \
+ util$(OBJ_EXT) \
+ $(mallocobj) $(ARCHOBJS)
miniperl_objs_nodt = $(mini_only_objs) $(common_objs) miniperlmain$(OBJ_EXT)
perllib_objs_nodt = $(main_only_objs) $(common_objs)
$spitshell >>$Makefile <<'!NO!SUBS!'
-perltoc_pod_prereqs = extra.pods pod/perl5259delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
+perltoc_pod_prereqs = extra.pods pod/perl5398delta.pod pod/perlapi.pod pod/perlintern.pod pod/perlmodlib.pod pod/perluniprops.pod
generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
generated_headers = uudmap.h bitcount.h mg_data.h
@echo `$(CCCMD)` $(PLDLFLAGS) $*.c
@`$(CCCMD)` $(PLDLFLAGS) $*.c
-.c.i: perl.h config.h
+.c.i:
@echo `$(CCCMDSRC)` -E $*.c \> $*.i
@`$(CCCMDSRC)` -E $*.c > $*.i
-.c.s: perl.h config.h
+.c.s:
@echo `$(CCCMDSRC)` -S $*.c
@`$(CCCMDSRC)` -S $*.c
-all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make $(MANIFEST_SRT)
+all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make $(MANIFEST_SRT) common_build
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
@sh -c true
!NO!SUBS!
-for file in op perl; do
+for file in $mini_special; do
if $issymlink $file.c; then
$spitshell >>$Makefile <<!GROK!THIS!
$spitshell >>$Makefile <<'!NO!SUBS!'
+cygwin.c: cygwin/cygwin.c
+ $(LNS) cygwin/cygwin.c
+
globals$(OBJ_EXT): $(generated_headers)
uudmap.h mg_data.h: bitcount.h
case "$osname" in
aix)
- $spitshell >>$Makefile <<!GROK!THIS!
-LIBS = $perllibs
-# In AIX we need to change this for building Perl itself from
-# its earlier definition (which is for building external
-# extensions *after* Perl has been built and installed)
-CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
-
-!GROK!THIS!
case "$useshrplib" in
define|true|[yY]*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
-MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
-
-$(LIBPERL_NONSHR): $(perllib_objs)
- $(RMS) $(LIBPERL_NONSHR)
- $(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
-
-$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
- $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
- opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
-
-MINIPERLEXP = $(MINIPERL_NONSHR)
-
LIBPERLEXPORT = perl.exp
!NO!SUBS!
;;
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-MINIPERLEXP = $(MINIPERL_EXE)
PERLEXPORT = perl.exp
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
-perl.exp: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl --sort-fold PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" > perl.exp
+perl.exp: $(MINIPERL_EXE) makedef.pl $(CONFIGPM) $(SYM) $(SYMH)
+ $(MINIPERL) makedef.pl --sort-fold PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" > perl.exp
!NO!SUBS!
;;
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl $(CONFIGPM) $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
-
-!NO!SUBS!
- ;;
-cygwin)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-cygwin.c: cygwin/cygwin.c
- $(LNS) cygwin/cygwin.c
-
-LIBPERL_NONSHR = libperl$(LIB_EXT)
-
-$(LIBPERL_NONSHR): $(perllib_objs)
- $(RMS) $(LIBPERL_NONSHR)
- $(AR) rc $(LIBPERL_NONSHR) $(perllib_objs)
+ $(MINIPERL) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
!NO!SUBS!
;;
# b) have the rest of the Makefile depend on the more obvious $(MINIPERL_EXE)
$(MINIPERL_EXE): lib/buildcustomize.pl
+ @touch $(MINIPERL_EXE)
!NO!SUBS!
$(MINIPERL) -f write_buildcustomize.pl
!NO!SUBS!
;;
- aix*)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-lib/buildcustomize.pl: $& $(miniperl_objs)
- $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) $(miniperl_objs) $(libs)
- $(LDLIBPTH) ./miniperl$(HOST_EXE_EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
- $(MINIPERL) -f write_buildcustomize.pl
-!NO!SUBS!
- ;;
- next4*)
- $spitshell >>$Makefile <<'!NO!SUBS!'
-lib/buildcustomize.pl: $& $(miniperl_objs) write ldcustomize.pl
- $(CC) -o $(MINIPERL_EXE) $(miniperl_objs libs)
- $(LDLIBPTH) ./miniperl$(HOST _EXT) -w -Ilib -Idist/Exporter/lib -MExporter -e '<?>' || sh -c 'echo >&2 Failed to build miniperl. Please run make minitest; exit 1'
- $(MINIPERL) -f write_buildcustomize.pl
-!NO!SUBS!
- ;;
darwin*)
case "$osvers" in
[1-6].*) ;;
-@rm -f miniperl.xok
!NO!SUBS!
- case $osname in
+ case "$osname" in
# In AmigaOS the Perl executable needs to be linked with -ldl,
# but none of the other executables should be.
amigaos) $spitshell >>$Makefile <<'!NO!SUBS!'
$(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) $(perlmain_objs) $(LLIBPERL) $(static_ext) `cat ext.libs` $(libs)
!NO!SUBS!
;;
+
+ darwin)
+ case "$useshrplib$osvers" in
+ true1[5-9]*|true[2-9]*) $spitshell >>$Makefile <<'!NO!SUBS!'
+ $(SHRPENV) $(CC) -o perl $(PERL_EXE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) $(perlmain_objs) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+!NO!SUBS!
+ ;;
+ *) $spitshell >>$Makefile <<'!NO!SUBS!'
+ $(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) $(perlmain_objs) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
+!NO!SUBS!
+ ;;
+ esac
+ ;;
+
*) $spitshell >>$Makefile <<'!NO!SUBS!'
$(SHRPENV) $(CC) -o perl $(CLDFLAGS) $(CCDLFLAGS) $(perlmain_objs) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
$spitshell >>$Makefile <<'!NO!SUBS!'
-# Microperl. This is just a convenience thing if one happens to
-# build also the full Perl and therefore the real big Makefile:
-# usually one should manually explicitly issue the below command.
-
-.PHONY: microperl
-microperl:
- $(MAKE) -f Makefile.micro
-
!NO!SUBS!
fi
$spitshell >>$Makefile <<!GROK!THIS!
.PHONY: makeppport
makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
- -@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
+ -@for f in Makefile.PL PPPort_pm.PL RealPPPort_xs.PL ppport_h.PL; do \
(cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
done
$spitshell >>$Makefile <<'!NO!SUBS!'
-.PHONY: preplibrary
+.PHONY: preplibrary common_build
preplibrary: $(MINIPERL_EXE) $(CONFIGPM) $(PREPLIBRARY_LIBPERL)
$(CONFIGPM_FROM_CONFIG_SH): $(CONFIGPOD)
unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
- $(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
+ $(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makenormtest -makelist -p
# Commented out so always runs, mktables looks at far more files than we
# can in this makefile to decide if needs to run or not
# touch uni.data
# $(PERL_EXE) and ext because pod_lib.pl needs Digest::MD5
# But also this ensures that all extensions are built before we try to scan
# them, which picks up Devel::PPPort's documentation.
-pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
+pod/perltoc.pod: $(perltoc_pod_prereqs) $(PERL_EXE) $(ext) pod/buildtoc
$(RUN_PERL) -f pod/buildtoc -q
pod/perlapi.pod: pod/perlintern.pod
pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
$(MINIPERL) pod/perlmodlib.PL -q
-pod/perl5259delta.pod: pod/perldelta.pod
- $(RMS) pod/perl5259delta.pod
- $(LNS) perldelta.pod pod/perl5259delta.pod
+pod/perl5398delta.pod: pod/perldelta.pod
+ $(RMS) pod/perl5398delta.pod
+ $(LNS) perldelta.pod pod/perl5398delta.pod
extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
install: install-all
!NO!SUBS!
-
for name in all notify silent strip verbose; do
flags="--$name";
flags=`echo $flags | sed -e 's/--all//'`
done
if test "X$hostperl" != X; then
+ LOCAL_PERL='$(HOST_PERL)'
$spitshell >>$Makefile <<'!NO!SUBS!'
install.perl: $(INSTALL_DEPENDENCE) installperl
$(HOST_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
-@test ! -s extras.lst || $(MAKE) extras.install
-
-install.man: all installman
- $(HOST_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
-
-# XXX Experimental. Hardwired values, but useful for testing.
-# Eventually Configure could ask for some of these values.
-install.html: all installhtml
- -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
- $(HOST_PERL) installhtml \
- --podroot=. --podpath=. --recurse \
- --htmldir=$(privlib)/html \
- --htmlroot=$(privlib)/html \
- --splithead=pod/perlipc \
- --splititem=pod/perlfunc \
- --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
- --verbose
!NO!SUBS!
else
+ LOCAL_PERL='$(RUN_PERL)'
$spitshell >>$Makefile <<'!NO!SUBS!'
install.perl: $(INSTALL_DEPENDENCE) installperl
$(RUN_PERL) installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
-@test ! -s extras.lst || PATH="`pwd`:\${PATH}" PERL5LIB="`pwd`/lib" \$(RUN_PERL) -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+!NO!SUBS!
+fi
+
+$spitshell >>$Makefile <<!GROK!THIS!
install.man: all installman
- $(RUN_PERL) installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
+ ${LOCAL_PERL} installman --destdir=\$(DESTDIR) \$(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
- -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
- $(RUN_PERL) installhtml \
- --podroot=. --podpath=. --recurse \
- --htmldir=$(privlib)/html \
- --htmlroot=$(privlib)/html \
- --splithead=pod/perlipc \
- --splititem=pod/perlfunc \
- --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
+ -@test -f README.vms && cd vms && \$(LNS) ../README.vms README_vms.pod && cd ..
+ ${LOCAL_PERL} installhtml \\
+ --podroot=. --podpath=. --recurse \\
+ --htmldir=\$(privlib)/html \\
+ --splithead=pod/perlipc \\
+ --splititem=pod/perlfunc \\
+ --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \\
--verbose
-!NO!SUBS!
-fi
+!GROK!THIS!
$spitshell >>$Makefile <<'!NO!SUBS!'
CHMOD_W = chmod +w
# The following files are generated automatically
-# embed.pl: proto.h embed.h embedvar.h perlapi.h perlapi.c
+# embed.pl: proto.h embed.h embedvar.h
# opcode.pl: opcode.h opnames.h pp_proto.h
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# with your existing copy of perl
# (make regen_headers is kept for backwards compatibility)
-AUTOGEN_FILES = opcode.h opnames.h pp_proto.h proto.h embed.h embedvar.h \
- perlapi.h perlapi.c regnodes.h warnings.h lib/warnings.pm \
- lib/feature.pm feature.h
-
.PHONY: regen_headers regen_all
regen: FORCE
-perl regen.pl
- -perl regen/uconfig_h.pl
regen_headers regen-headers: FORCE
-perl regen.pl -v
- -perl regen/uconfig_h.pl -v
regen_meta regen-meta: META.yml META.json
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c generate_uudmap$(EXE_EXT) $(generated_headers)
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c $(mini_only_src) generate_uudmap$(EXE_EXT) $(generated_headers)
-rmdir .depending
+ -rm *.depends makedepend_file
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o pod/roffitall
+ -rm -f perl.exp ext.libs $(generated_pods) uni.data $(mini_only_objs) pod/roffitall
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
- -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
+ -rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.*
-rm -f config.arch config.over $(DTRACE_H)
_cleaner1:
-rm -f `grep -v ^# mkppport.lst | grep . | sed -e 's/$$/\/ppport.h/'`
# Dear POSIX, thanks for making the default to xargs to be
-# run once if nothhing is passed in. It is such a great help.
+# run once if nothing is passed in. It is such a great help.
# Some systems do not support "?", so keep these files separate.
+
+# The Time::HiRes Makefile *should* remove dist/Time-HiRes/xdefine for 'clean',
+# but it's possible to get a rebuilt checkout into a state where it can't run
+# distclean, and can't recover until the file is gone.
+# There's no harm in adding it to the top level 'distclean' target - it should
+# anyway by then, and miniperl is long gone.
+# Add new rules before that line - the next line (rm -f so_locations ...) is
+# used as a placeholder by a regen script.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -rf $(unidatafiles) $(unidatadirs)
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
- rm -f h2ph.man pstruct
+ rm -f h2ph.man
rm -rf .config
rm -f preload
rm -f pod2htmd.tmp
rm -rf pod/perlfunc pod/perlipc
-rmdir ext/B/lib
- rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ -rm -f dist/Time-HiRes/xdefine
+ rm -f so_locations $(LIBPERL_NONSHR)
-rmdir lib/version lib/threads lib/inc/ExtUtils lib/inc lib/encoding
-rmdir lib/autodie/exception lib/autodie/Scope lib/autodie lib/XS
-rmdir lib/Win32API lib/VMS lib/Unicode/Collate/Locale
-rmdir lib/Unicode/Collate/CJK lib/Unicode/Collate lib/Tie/Hash
- -rmdir lib/Thread lib/Text lib/Test2/Util lib/Test2/Tools
- -rmdir lib/Test2/IPC/Driver lib/Test2/IPC lib/Test2/Hub/Interceptor
- -rmdir lib/Test2/Hub lib/Test2/Formatter lib/Test2/Event/TAP
- -rmdir lib/Test2/Event lib/Test2/API lib/Test2 lib/Test/use
- -rmdir lib/Test/Tester lib/Test/Builder/Tester lib/Test/Builder/IO
- -rmdir lib/Test/Builder lib/Test lib/Term lib/TAP/Parser/YAMLish
+ -rmdir lib/Thread lib/Text lib/Test2/Workflow/Task lib/Test2/Workflow
+ -rmdir lib/Test2/Util/Table lib/Test2/Util lib/Test2/Tools
+ -rmdir lib/Test2/Require lib/Test2/Plugin
+ -rmdir lib/Test2/Manual/Tooling/Plugin lib/Test2/Manual/Tooling
+ -rmdir lib/Test2/Manual/Testing lib/Test2/Manual/Anatomy
+ -rmdir lib/Test2/Manual lib/Test2/IPC/Driver lib/Test2/IPC
+ -rmdir lib/Test2/Hub/Interceptor lib/Test2/Hub lib/Test2/Formatter
+ -rmdir lib/Test2/EventFacet/Info lib/Test2/EventFacet
+ -rmdir lib/Test2/Event/TAP lib/Test2/Event lib/Test2/Compare
+ -rmdir lib/Test2/Bundle lib/Test2/AsyncSubtest/Event
+ -rmdir lib/Test2/AsyncSubtest lib/Test2/API/InterceptResult
+ -rmdir lib/Test2/API lib/Test2 lib/Test/use lib/Test/Tester
+ -rmdir lib/Test/Builder/Tester lib/Test/Builder/IO lib/Test/Builder
+ -rmdir lib/Test lib/Term/Table lib/Term lib/TAP/Parser/YAMLish
-rmdir lib/TAP/Parser/SourceHandler lib/TAP/Parser/Scheduler
-rmdir lib/TAP/Parser/Result lib/TAP/Parser/Iterator lib/TAP/Parser
-rmdir lib/TAP/Harness lib/TAP/Formatter/File
-rmdir lib/TAP/Formatter/Console lib/TAP/Formatter lib/TAP
-rmdir lib/Sys/Syslog lib/Sys lib/Sub lib/Search lib/Scalar
- -rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/PerlIO/via
- -rmdir lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse lib/Params
- -rmdir lib/Net/FTP lib/Module/Load lib/Module/CoreList lib/Module
- -rmdir lib/Memoize lib/Math/BigInt lib/Math/BigFloat lib/Math lib/MIME
- -rmdir lib/Locale/Maketext lib/Locale/Codes lib/Locale lib/List/Util
- -rmdir lib/List lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
- -rmdir lib/IO/Uncompress lib/IO/Socket lib/IO/Compress/Zlib
- -rmdir lib/IO/Compress/Zip lib/IO/Compress/Gzip lib/IO/Compress/Base
- -rmdir lib/IO/Compress/Adapter lib/IO/Compress lib/IO
- -rmdir lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash lib/HTTP
- -rmdir lib/Filter/Util lib/Filter lib/File/Spec lib/ExtUtils/Typemaps
- -rmdir lib/ExtUtils/ParseXS lib/ExtUtils/MakeMaker/version
- -rmdir lib/ExtUtils/MakeMaker lib/ExtUtils/Liblist
- -rmdir lib/ExtUtils/Constant lib/ExtUtils/Command
+ -rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/Pod/Html
+ -rmdir lib/PerlIO/via lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse
+ -rmdir lib/Params lib/Net/FTP lib/Module/Load lib/Module/CoreList
+ -rmdir lib/Module lib/Memoize lib/Math/BigRat lib/Math/BigInt
+ -rmdir lib/Math/BigFloat lib/Math lib/MIME lib/Locale/Maketext
+ -rmdir lib/Locale lib/List/Util lib/List lib/JSON/PP lib/JSON lib/IPC
+ -rmdir lib/IO/Uncompress/Adapter lib/IO/Uncompress lib/IO/Socket
+ -rmdir lib/IO/Compress/Zlib lib/IO/Compress/Zip lib/IO/Compress/Gzip
+ -rmdir lib/IO/Compress/Base lib/IO/Compress/Adapter lib/IO/Compress
+ -rmdir lib/IO lib/I18N/LangTags lib/I18N lib/Hash/Util lib/Hash
+ -rmdir lib/HTTP lib/Getopt/Long lib/Filter/Util lib/Filter
+ -rmdir lib/File/Spec lib/ExtUtils/Typemaps lib/ExtUtils/ParseXS
+ -rmdir lib/ExtUtils/MakeMaker/version lib/ExtUtils/MakeMaker
+ -rmdir lib/ExtUtils/Liblist lib/ExtUtils/Constant lib/ExtUtils/Command
-rmdir lib/ExtUtils/CBuilder/Platform/Windows
-rmdir lib/ExtUtils/CBuilder/Platform lib/ExtUtils/CBuilder
-rmdir lib/Exporter lib/Encode/Unicode lib/Encode/MIME/Header
-rmdir lib/Encode/MIME lib/Encode/KR lib/Encode/JP lib/Encode/CN
-rmdir lib/Encode lib/Digest lib/Devel lib/Data lib/Config/Perl
-rmdir lib/Compress/Raw lib/Compress lib/Carp lib/CPAN/Plugin
- -rmdir lib/CPAN/Meta/History lib/CPAN/Meta lib/CPAN/LWP
- -rmdir lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP lib/CPAN/Exception
- -rmdir lib/CPAN/API lib/CPAN lib/Attribute lib/Archive/Tar lib/Archive
- -rmdir lib/App/Prove/State/Result lib/App/Prove/State lib/App/Prove
- -rmdir lib/App lib/Amiga
+ -rmdir lib/CPAN/Meta/Requirements lib/CPAN/Meta/History lib/CPAN/Meta
+ -rmdir lib/CPAN/LWP lib/CPAN/Kwalify lib/CPAN/HTTP lib/CPAN/FTP
+ -rmdir lib/CPAN/Exception lib/CPAN/API lib/CPAN lib/Attribute
+ -rmdir lib/Archive/Tar lib/Archive lib/App/Prove/State/Result
+ -rmdir lib/App/Prove/State lib/App/Prove lib/App lib/Amiga
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=distclean
# The README below ensures that the dependency list is never empty and
# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
-MAKEDEPEND = Makefile makedepend
+MAKEDEPEND = Makefile makedepend_file makedepend
$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
depend: makedepend $(DTRACE_H) $(generated_headers)
sh ./makedepend MAKE="$(MAKE)" cflags
+.c.c.depends:
+ sh ./makedepend_file $< $@ cflags
+
.PHONY: test check test_prep test_prep_nodll test_prep_pre \
test_prep_reonly test_tty test-tty test_notty test-notty \
test_harness test_harness_notty minitest test-reonly _test
+# The _test target is there just for Test::Smoke, which does a make test_prep
+# always before invoking this target, thus preventing checking again
_test:
- echo >&2 The _test target is deprecated. Please upgrade your smoker
$(RUN_TESTS) choose
# Cannot delegate rebuilding of t/perl to make
case "$targethost" in
'') $spitshell >>$Makefile <<'!NO!SUBS!'
test_prep test-prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) $(PERL_EXE) \
- $(dynamic_ext) $(TEST_PERL_DLL) runtests $(generated_pods)
+ $(dynamic_ext) $(TEST_PERL_DLL) runtests $(generated_pods) common_build
cd t && (rm -f $(PERL_EXE); $(LNS) ../$(PERL_EXE) $(PERL_EXE))
!NO!SUBS!
*) $spitshell >>$Makefile <<!GROK!THIS!
test_prep test-prep: test_prep_pre \$(MINIPERL_EXE) \$(unidatafiles) \$(PERL_EXE) \
\$(dynamic_ext) \$(TEST_PERL_DLL) runtests \
- \$(generated_pods)
+ \$(generated_pods) common_build
$to libperl.*
$to t/*
$to lib/*
# minitest can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest_prep:
+minitest_prep: $(MINIPERL_EXE)
-@test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm, or the Unicode data files."
@echo " "
- - cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE))
+ cd t && (rm -f $(PERL_EXE); $(LNS) ../$(MINIPERL_EXE) $(PERL_EXE))
MINITEST_TESTS = base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t opbasic/*.t op/*.t uni/*.t perf/*.t
-minitest: $(MINIPERL_EXE) minitest_prep
- - cd t && $(RUN_PERL) TEST $(MINITEST_TESTS) <$(devtty)
+minitest: minitest_prep
+ cd t && $(RUN_PERL) TEST $(MINITEST_TESTS) <$(devtty)
-minitest-notty minitest_notty: $(MINIPERL_EXE) minitest_prep
- - cd t && PERL_SKIP_TTY_TEST=1 $(RUN_PERL) TEST $(MINITEST_TESTS)
+minitest-notty minitest_notty: minitest_prep
+ cd t && PERL_SKIP_TTY_TEST=1 $(RUN_PERL) TEST $(MINITEST_TESTS)
# Test via harness
HARNESS_NOTTY=1 TESTFILE=harness $(RUN_TESTS) choose
test_reonly test-reonly: test_prep_reonly
- TEST_ARGS='-re \bre\/' TESTFILE=harness $(RUN_TESTS) choose
+ TEST_ARGS='re/*.t ../ext/re/t/*.t' PERL_TEST_HARNESS_ASAP=1 TESTFILE=harness $(RUN_TESTS) choose
# Porting tests (well-formedness of pod, manifest, etc)
test_porting test-porting: test_prep
- cd t && $(RUN_PERL) harness porting/*.t ../lib/diagnostics.t
+ TEST_ARGS='porting/*.t lib/diagnostics.t' TESTFILE=harness $(RUN_TESTS) choose
+
+!NO!SUBS!
+
+$spitshell>>$Makefile <<!GROK!THIS!
+
+# intended as a common way to add dependencies to test-prep and all
+common_build: $common_build_deps
+
+!GROK!THIS!
+
+$spitshell >>$Makefile <<'!NO!SUBS!'
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
.PHONY: ctags
-TAGS: $(c1) $(c2) $(c3) $(c4) $(c5) $(h)
- etags $(c1) $(c2) $(c3) $(c4) $(c5) $(h)
+TAGS: $(c_base) $(h)
+ etags $(c_base) $(h)
+!NO!SUBS!
+
+$spitshell >>$Makefile <<!GROK!THIS!
ctags:
- ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c --exclude=perlmini.c *.c *.h
+ ctags -f Tags -N --totals --languages=c --langmap=c:+.h $ctags_exclude *.c *.h
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
-!NO!SUBS!
+!GROK!THIS!
$eunicefix Makefile
$rm -f $firstmakefile