# /usr/lib/libdb.so.1, but that is not really meant for public consumption.
# XXX Revisit after perl 5.10 -- should we apply this to older Solaris
# versions too? (A.D. 11/2007).
-case "`uname -r`" in
+case "`$run uname -r`" in
5.[0-9]) ;;
*) ignore_versioned_solibs=y ;;
esac
`
case "$cc" in
-'') if test -f /opt/SUNWspro/bin/cc; then
- cc=/opt/SUNWspro/bin/cc
- cat <<EOF >&4
+'') for i in `ls -r /opt/solstudio*/bin/cc` /opt/SUNWspro/bin/cc
+ do
+ if test -f "$i"; then
+ cc=$i
+ cat <<EOF >&4
You specified no cc but you seem to have the Workshop compiler
($cc) installed, using that.
e.g. Configure -Dcc=gcc
EOF
- fi
+ break
+ fi
+ done
;;
esac
# Check that /dev/fd is mounted. If it is not mounted, let the
# user know that suid scripts may not work.
-mount | grep '^/dev/fd ' 2>&1 > /dev/null
+$run mount | grep '^/dev/fd ' 2>&1 > /dev/null
case $? in
0) ;;
*)
# See if libucb can be found in /usr/lib. If it is, warn the user
# that this may cause problems while building Perl extensions.
-/usr/bin/ls /usr/lib/libucb* >/dev/null 2>&1
-case $? in
+found_libucb=''
+case "$run" in
+'') /usr/bin/ls /usr/lib/libucb* >/dev/null 2>&1
+ found_libucb=$?
+ ;;
+*) $run /usr/bin/ls '/usr/lib/libucb*' >/dev/null 2>&1
+ found_libucb=$?
+ ;;
+esac
+
+case $found_libucb in
0)
cat <<END >&4
make -v > make.vers 2>&1
if grep GNU make.vers > /dev/null 2>&1; then
tmp=`type make | awk '{print $NF}' | sed 's/[()]//g'`
- case "`/usr/bin/ls -lL $tmp`" in
+ case "`${ls:-'/usr/bin/ls'} -lL $tmp`" in
??????s*)
cat <<END >&2
# Get gcc to share its secrets.
echo 'int main() { return 0; }' > try.c
# Indent to avoid propagation to config.sh
- verbose=`${cc:-cc} -v -o try try.c 2>&1`
+ verbose=`${cc:-cc} $ccflags -v -o try try.c 2>&1`
# XXX TODO: 'specs' output changed from 'Reading specs from' in gcc-[23] to 'Using
# built-in specs' in gcc-4. Perhaps we should just use the same gcc test as
END
# Apparently not needed, at least for as 2.7 and later.
- # cc="${cc:-cc} -B/usr/ccs/bin/"
+ # cc="${cc:-cc} $ccflags -B/usr/ccs/bin/"
fi
# See if ld(1) is GNU ld(1). GNU ld(1) might not work for this job.
# Recompute $verbose since we may have just changed $cc.
- verbose=`${cc:-cc} -v -o try try.c 2>&1 | grep ld 2>&1`
+ verbose=`${cc:-cc} $ccflags -v -o try try.c 2>&1 | grep ld 2>&1`
if echo "$verbose" | grep ' /usr/ccs/bin/ld ' >/dev/null 2>&1; then
# Ok, gcc directly calls the Solaris /usr/ccs/bin/ld.
# (This may all depend on local configurations too.)
# Recompute verbose with -Wl,-v to find GNU ld if present
- verbose=`${cc:-cc} -Wl,-v -o try try.c 2>&1 | grep /ld 2>&1`
+ verbose=`${cc:-cc} $ccflags -Wl,-v -o try try.c 2>&1 | grep /ld 2>&1`
myld=`echo $verbose | awk '/\/ld/ {print $1}'`
# This assumes that gcc's output will not change, and that
END
ccdlflags="$ccdlflags -Wl,-E"
- lddlflags="$lddlflags -Wl,-E -G"
+ lddlflags="$lddlflags -Wl,-E -shared"
fi
fi
cat > try.c << 'EOM'
#include <stdio.h>
int main() {
-#ifdef __SUNPRO_C
+#if defined(__SUNPRO_C)
printf("workshop\n");
#else
+#if defined(__SUNPRO_CC)
+ printf("workshop CC\n");
+#else
printf("\n");
#endif
+#endif
return(0);
}
EOM
- tryworkshopcc="${cc:-cc} try.c -o try"
+ tryworkshopcc="${cc:-cc} $ccflags try.c -o try"
if $tryworkshopcc >/dev/null 2>&1; then
- cc_name=`./try`
+ cc_name=`$run ./try`
if test "$cc_name" = "workshop"; then
- ccversion="`${cc:-cc} -V 2>&1|sed -n -e '1s/^cc: //p'`"
+ ccversion="`${cc:-cc} -V 2>&1|sed -n -e '1s/^[Cc][Cc]: //p'`"
+ fi
+ if test "$cc_name" = "workshop CC"; then
+ ccversion="`${cc:-CC} -V 2>&1|sed -n -e '1s/^[Cc][C]: //p'`"
+ fi
+ case "$cc_name" in
+ workshop*)
+ # Settings for either cc or CC
if test ! "$use64bitall_done"; then
loclibpth="/usr/lib /usr/ccs/lib `$getworkshoplibs` $loclibpth"
fi
- fi
+ # Sun CC/cc don't support gcc attributes
+ d_attribute_format='undef'
+ d_attribute_malloc='undef'
+ d_attribute_nonnull='undef'
+ d_attribute_noreturn='undef'
+ d_attribute_pure='undef'
+ d_attribute_unused='undef'
+ d_attribute_warn_unused_result='undef'
+ ;;
+ esac
fi
# See if as(1) is GNU as(1). GNU might not work for this job.
''|$define|true|[yY]*)
# Keep these in the left margin.
-ccflags_uselargefiles="`getconf LFS_CFLAGS 2>/dev/null`"
-ldflags_uselargefiles="`getconf LFS_LDFLAGS 2>/dev/null`"
-libswanted_uselargefiles="`getconf LFS_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g`"
+ccflags_uselargefiles="`$run getconf LFS_CFLAGS 2>/dev/null`"
+ldflags_uselargefiles="`$run getconf LFS_LDFLAGS 2>/dev/null`"
+libswanted_uselargefiles="`$run getconf LFS_LIBS 2>/dev/null|sed -e 's@^-l@@' -e 's@ -l@ @g'`"
ccflags="$ccflags $ccflags_uselargefiles"
ldflags="$ldflags $ldflags_uselargefiles"
;;
esac
-if test `uname -p` = i386; then
+if test `$run uname -p` = i386; then
case "$use64bitint" in
"$define"|true|[yY]*)
ccflags="$ccflags -DPTR_IS_LONG"
esac
fi
-if test `uname -p` = sparc -o `uname -p` = i386; then
+if test `$run uname -p` = sparc -o `$run uname -p` = i386; then
cat > UU/use64bitint.cbu <<'EOCBU'
# This script UU/use64bitint.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use 64 bit integers.
case "$use64bitint" in
"$define"|true|[yY]*)
- case "`uname -r`" in
+ case "`$run uname -r`" in
5.[0-4])
cat >&4 <<EOM
Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit integers.
# after it has prompted the user for whether to be maximally 64 bitty.
case "$use64bitall-$use64bitall_done" in
"$define-"|true-|[yY]*-)
- case "`uname -r`" in
+ case "`$run uname -r`" in
5.[0-6])
cat >&4 <<EOM
Solaris `uname -r|sed -e 's/^5\./2./'` does not support 64-bit pointers.
exit 1
;;
esac
- processor=`uname -p`;
+ processor=`$run uname -p`;
if test "$processor" = sparc; then
libc='/usr/lib/sparcv9/libc.so'
if test ! -f $libc; then
case "${cc:-cc} -v 2>/dev/null" in
*gcc*)
echo 'int main() { return 0; }' > try.c
- case "`${cc:-cc} -mcpu=v9 -m64 -S try.c 2>&1 | grep 'm64 is not supported by this configuration'`" in
+ case "`${cc:-cc} $ccflags -mcpu=v9 -m64 -S try.c 2>&1 | grep 'm64 is not supported by this configuration'`" in
*"m64 is not supported"*)
cat >&4 <<EOM
# This adds in -Wa,-xarch=v9. I suspect that's superfluous,
# since the -m64 above should do that already. Someone
# with gcc-3.x.x, please test with gcc -v. A.D. 20-Nov-2003
-# if test $processor = sparc -a X`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null` != X; then
-# ccflags="$ccflags -Wa,`getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
+# if test $processor = sparc -a X`$run getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null` != X; then
+# ccflags="$ccflags -Wa,`$run getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
# fi
ldflags="$ldflags -m64"
- lddlflags="$lddlflags -G -m64"
+
+ # See [perl #66604]: On Solaris 11, gcc -m64 on amd64
+ # appears not to understand -G. (gcc -G has not caused
+ # problems on other platforms in the past.) gcc versions
+ # at least as old as 3.4.3 support -shared, so just
+ # use that with Solaris 11 and later, but keep
+ # the old behavior for older Solaris versions.
+ case "$osvers" in
+ 2.?|2.10) lddlflags="$lddlflags -G -m64" ;;
+ *) lddlflags="$lddlflags -shared -m64" ;;
+ esac
;;
*)
- ccflags="$ccflags `getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
- ldflags="$ldflags `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
- lddlflags="$lddlflags -G `getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
+ getconfccflags="`$run getconf XBS5_LP64_OFF64_CFLAGS 2>/dev/null`"
+ getconfldflags="`$run getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
+ getconflddlflags="`$run getconf XBS5_LP64_OFF64_LDFLAGS 2>/dev/null`"
+ echo "int main() { return(0); } " > try.c
+ case "`${cc:-cc} $getconfccflags try.c 2>&1 | grep 'deprecated'`" in
+ *" -xarch=generic64 is deprecated, use -m64 "*)
+ getconfccflags=`echo $getconfccflags | sed -e 's/xarch=generic64/m64/'`
+ getconfldflags=`echo $getconfldflags | sed -e 's/xarch=generic64/m64/'`
+ getconflddlflags=`echo $getconflddlflags | sed -e 's/xarch=generic64/m64/'`
+ ;;
+ esac
+ ccflags="$ccflags $getconfccflags"
+ ldflags="$ldflags $getconfldflags"
+ lddlflags="$lddlflags -G $getconflddlflags"
+
echo "int main() { return(0); } " > try.c
tryworkshopcc="${cc:-cc} try.c -o try $ccflags"
if test "$processor" = sparc; then
#
cat >> config.over <<'EOOVER'
if test "$d_unsetenv" = "$define" -a \
- `expr "$ccflags" : '.*-D_PERL_USE_SAFE_PUTENV'` -eq 0; then
+ `expr "$ccflags" : '.*-DPERL_USE_SAFE_PUTENV'` -eq 0; then
ccflags="$ccflags -DPERL_USE_SAFE_PUTENV"
fi
EOOVER
https://perl5.git.perl.org / perl5.git / blobdiff