# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
-# (perl511.dll). Also makes individual DLLs for the XS extensions.
+# (perl513.dll). Also makes individual DLLs for the XS extensions.
#
##
INST_TOP *= $(INST_DRV)\perl
#
+# Uncomment if you want to build a 32-bit Perl using a 32-bit compiler
+# on a 64-bit version of Windows.
+#WIN64 *= undef
+
+#
# Comment this out if you DON'T want your perl installation to be versioned.
# This means that the new installation will overwrite any files from the
# old installation at the same INST_TOP location. Leaving it enabled is
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.11.0
+#INST_VER *= \5.13.3
#
# Comment this out if you DON'T want your perl installation to have
#CCTYPE *= MSVC90
# Borland 5.02 or later
#CCTYPE *= BORLAND
-# MinGW with gcc-2.95.2 or later
+# MinGW or mingw-w64 with gcc-2.95.2 or later
CCTYPE *= GCC
#
#CFG *= Debug
#
-# uncomment to enable use of PerlCRT.DLL when using the Visual C compiler.
-# It has patches that fix known bugs in older versions of MSVCRT.DLL.
-# This currently requires VC 5.0 with Service Pack 3 or later.
-# Get it from CPAN at http://www.cpan.org/authors/id/D/DO/DOUGL/
-# and follow the directions in the package to install.
-#
-# Not recommended if you have VC 6.x and you're not running Windows 9x.
-#
-#USE_PERLCRT *= define
-
-#
# uncomment to enable linking with setargv.obj under the Visual C
# compiler. Setting this options enables perl to expand wildcards in
# arguments, but it may be harder to use alternate methods like
# set this to additionally provide a statically linked perl-static.exe.
# Note that dynamic loading will not work with this perl, so you must
# include required modules statically using the STATIC_EXT or ALL_STATIC
-# variables below. A static library perl511s.lib will also be created.
+# variables below. A static library perl513s.lib will also be created.
# Ordinary perl.exe is not affected by this option.
#
#BUILD_STATIC *= define
.ELSE
CCHOME *= $(MSVCDIR)
.ENDIF
-CCINCDIR *= $(CCHOME)\include
-CCLIBDIR *= $(CCHOME)\lib
+
+#
+# If building with gcc-4.x.x (or x86_64-w64-mingw32-gcc-4.x.x), then
+# uncomment the following assignment to GCC_4XX, make sure that CCHOME
+# has been set correctly above, and uncomment the appropriate
+# GCCHELPERDLL line.
+# The name of the dll can change, depending upon which vendor has supplied
+# your 4.x.x compiler, and upon the values of "x".
+# (The dll will be in your mingw/bin folder, so check there if you're
+# unsure about the correct name.)
+# Without these corrections, the op/taint.t test script will fail.
+#
+#GCC_4XX *= define
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_sjlj-1.dll
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_dw2-1.dll
+#GCCHELPERDLL *= $(CCHOME)\bin\libgcc_s_1.dll
+
+#
+# uncomment this if you are using x86_64-w64-mingw32 cross-compiler
+# ie if your gcc executable is called 'x86_64-w64-mingw32-gcc'
+# instead of the usual 'gcc'.
+#
+#GCCCROSS *= define
+
+#
+# Following sets $Config{incpath} and $Config{libpth}
+#
+
+.IF "$(GCCCROSS)" == "define"
+CCINCDIR *= $(CCHOME)\mingw\include
+CCLIBDIR *= $(CCHOME)\mingw\lib
+.ELSE
+CCINCDIR *= $(CCHOME)\include
+CCLIBDIR *= $(CCHOME)\lib
+.ENDIF
#
# Additional compiler flags can be specified here.
USE_IMP_SYS *= undef
USE_PERLIO *= undef
USE_LARGE_FILES *= undef
-USE_PERLCRT *= undef
.IF "$(USE_IMP_SYS)" == "define"
PERL_MALLOC = undef
AUTODIR = ..\lib\auto
LIBDIR = ..\lib
EXTDIR = ..\ext
+DISTDIR = ..\dist
+CPANDIR = ..\cpan
PODDIR = ..\pod
EXTUTILSDIR = $(LIBDIR)\ExtUtils
HTMLDIR = .\html
kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib \
+ version.lib odbc32.lib odbccp32.lib comctl32.lib \
import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
.ELIF "$(CCTYPE)" == "GCC"
-CC = gcc
-LINK32 = g++
-LIB32 = ar rc
-IMPLIB = dlltool
-RSC = windres
+.IF "$(GCCCROSS)" == "define"
+ARCHPREFIX = x86_64-w64-mingw32-
+.ENDIF
+
+CC = $(ARCHPREFIX)gcc
+LINK32 = $(ARCHPREFIX)g++
+LIB32 = $(ARCHPREFIX)ar rc
+IMPLIB = $(ARCHPREFIX)dlltool
+RSC = $(ARCHPREFIX)windres
i = .i
o = .o
INCLUDES = -I.\include -I. -I.. -I$(COREDIR)
DEFINES = -DWIN32 $(CRYPT_FLAG)
+.IF "$(WIN64)" == "define"
+DEFINES += -DWIN64 -DCONSERVATIVE
+.ENDIF
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
CXX_FLAG = -xc++
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
- -lwinmm -lversion -lodbc32 -lodbccp32
+ -lwinmm -lversion -lodbc32 -lodbccp32 -lcomctl32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
SUBSYS = console
CXX_FLAG = -TP -EHsc
-.IF "$(USE_PERLCRT)" != "define"
LIBC = msvcrt.lib
-.ELSE
-LIBC = PerlCRT.lib
-.ENDIF
.IF "$(CFG)" == "Debug"
.IF "$(CCTYPE)" == "MSVC20"
DEFINES += -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
.ENDIF
-# Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
-# VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
-# do not require the fix.
+# Use the MSVCRT read() fix only when using VC++ 6.x or earlier. Later
+# versions use MSVCR70.dll, MSVCR71.dll, etc, which do not require the
+# fix.
.IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
-.IF "$(USE_PERLCRT)" != "define"
BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
-.ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib odbc32.lib odbccp32.lib
+ version.lib odbc32.lib odbccp32.lib comctl32.lib
# The 64 bit Platform SDK compilers contain a runtime library that doesn't
# include the buffer overrun verification code used by the /GS switch.
# Since the code links against libraries that are compiled with /GS, this
# "security cookie verification" must be included via bufferoverlow.lib.
.IF "$(WIN64)" == "define"
-LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
+LIBBASEFILES += bufferoverflowU.lib
.ENDIF
-# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
EXTRACFLAGS = -nologo -GF -W3
CFLAGS_O = $(CFLAGS) $(BUILDOPT)
+.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE" || \
+ "$(CCTYPE)" == "MSVC90" || "$(CCTYPE)" == "MSVC90FREE"
+LINK_FLAGS += "/manifestdependency:type='Win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='*' publicKeyToken='6595b64144ccf1df' language='*'"
+.ELSE
+RSC_FLAGS = -DINCLUDE_MANIFEST
+.ENDIF
+
+
# used to allow local linking flags that are not propogated into Config.pm,
# currently unused
# -- BKS, 12-12-1999
.rc.res:
.IF "$(CCTYPE)" == "GCC"
- $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -i $< -o $@
+ $(RSC) --use-temp-file --include-dir=. --include-dir=.. -O COFF -D INCLUDE_MANIFEST -i $< -o $@
.ELSE
- $(RSC) -i.. $<
+ $(RSC) -i.. -DINCLUDE_MANIFEST $<
.ENDIF
#
.ENDIF
# Unicode data files generated by mktables
-UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
- ..\lib\unicore\Properties ..\lib\unicore\Decomposition.pl \
+UNIDATAFILES = ..\lib\unicore\Decomposition.pl ..\lib\unicore\TestProp.pl \
..\lib\unicore\CombiningClass.pl ..\lib\unicore\Name.pl \
- ..\lib\unicore\PVA.pl
+ ..\lib\unicore\Heavy.pl ..\lib\unicore\mktables.lst
# Directories of Unicode data files generated by mktables
UNIDATADIR1 = ..\lib\unicore\To
UNIDATADIR2 = ..\lib\unicore\lib
+PERLEXE_MANIFEST= .\perlexe.manifest
PERLEXE_ICO = .\perlexe.ico
PERLEXE_RES = .\perlexe.res
PERLDLL_RES =
.ELIF "$(CCTYPE)" == "GCC"
+.IF "$(WIN64)" == "define"
+.IF "$(GCCCROSS)" == "define"
+CFGSH_TMPL = config.gc64
+CFGH_TMPL = config_H.gc64
+.ELSE
+CFGSH_TMPL = config.gc64nox
+CFGH_TMPL = config_H.gc64nox
+.ENDIF
+.ELSE
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
-PERLIMPLIB = ..\libperl511$(a)
-PERLSTATICLIB = ..\libperl511s$(a)
+.ENDIF
+PERLIMPLIB = ..\libperl513$(a)
+PERLSTATICLIB = ..\libperl513s$(a)
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
-PERLIMPLIB *= ..\perl511$(a)
-PERLSTATICLIB *= ..\perl511s$(a)
-PERLDLL = ..\perl511.dll
+PERLIMPLIB *= ..\perl513$(a)
+PERLSTATICLIB *= ..\perl513s$(a)
+PERLDLL = ..\perl513.dll
XCOPY = xcopy /f /r /i /d /y
RCOPY = xcopy /f /r /i /e /d /y
NOOP = @rem
-#
-# filenames given to xsubpp must have forward slashes (since it puts
-# full pathnames in #line strings)
-XSUBPP = ..\$(MINIPERL) -I..\..\lib -I..\Cwd ..\$(EXTUTILSDIR)\xsubpp \
- -C++ -prototypes
-
MICROCORE_SRC = \
..\av.c \
..\deb.c \
WIN32_SRC += .\$(CRYPT_SRC)
.ENDIF
-DLL_SRC = $(DYNALOADER).c
-
X2P_SRC = \
..\x2p\a2p.c \
..\x2p\hash.c \
MINICORE_OBJ = $(MINIDIR)\{$(MICROCORE_OBJ:f) miniperlmain$(o) perlio$(o)}
MINIWIN32_OBJ = $(MINIDIR)\{$(WIN32_OBJ:f)}
MINI_OBJ = $(MINICORE_OBJ) $(MINIWIN32_OBJ)
-DLL_OBJ = $(DLL_SRC:db:+$(o))
+DLL_OBJ = $(DYNALOADER)
X2P_OBJ = $(X2P_SRC:db:+$(o))
GENUUDMAP_OBJ = $(GENUUDMAP:db:+$(o))
STATIC_EXT = Win32CORE
.ENDIF
-DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
+DYNALOADER = ..\DynaLoader$(o)
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
ODBCCP32_DLL = $(windir)\system\odbccp32.dll
.ENDIF
-ICWD = -I..\ext\Cwd
+ICWD = -I..\cpan\Cwd -I..\cpan\Cwd\lib
#
# Top targets
$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
$(X2P) Extensions_reonly
-$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
-
static: $(PERLEXESTATIC)
#----------------------------------------------------------------
regen_config_h:
$(MINIPERL) -I..\lib config_sh.PL --cfgsh-option-file $(mktmp $(CFG_VARS)) \
$(CFGSH_TMPL) > ..\config.sh
- cd .. && miniperl configpm
+ $(MINIPERL) -I..\lib ..\configpm --chdir=..
-del /f $(CFGH_TMPL)
- -$(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)"
+ -$(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)"
rename config.h $(CFGH_TMPL)
$(CONFIGPM) : $(MINIPERL) ..\config.sh config_h.PL ..\minimod.pl
- cd .. && miniperl configpm
+ $(MINIPERL) -I..\lib ..\configpm --chdir=..
if exist lib\* $(RCOPY) lib\*.* ..\lib\$(NULL)
$(XCOPY) ..\*.h $(COREDIR)\*.*
$(XCOPY) *.h $(COREDIR)\*.*
$(XCOPY) ..\ext\re\re.pm $(LIBDIR)\*.*
$(RCOPY) include $(COREDIR)\*.*
- $(MINIPERL) -I..\lib config_h.PL "INST_VER=$(INST_VER)" \
+ $(MINIPERL) -I..\lib $(ICWD) config_h.PL "INST_VER=$(INST_VER)" \
|| $(MAKE) $(MAKEMACROS) $(CONFIGPM) $(MAKEFILE)
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
perldll.def : $(MINIPERL) $(CONFIGPM) ..\global.sym ..\pp.sym ..\makedef.pl create_perllibst_h.pl
$(MINIPERL) -I..\lib create_perllibst_h.pl
- $(MINIPERL) -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
+ $(MINIPERL) -I..\lib -w ..\makedef.pl PLATFORM=win32 $(OPTIMIZE) $(DEFINES) \
$(BUILDOPT) CCTYPE=$(CCTYPE) > perldll.def
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
$(mktmp $(LKPRE) $(PERLDLL_OBJ) \
$(shell @type Extensions_static) \
$(LIBFILES) $(LKPOST))
- dlltool --output-lib $(PERLIMPLIB) \
+ $(IMPLIB) --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--def perldll.def \
--base-file perl.base \
.ENDIF
$(XCOPY) $(PERLSTATICLIB) $(COREDIR)
-$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
+$(PERLEXE_RES): perlexe.rc $(PERLEXE_MANIFEST) $(PERLEXE_ICO)
$(MINIMOD) : $(MINIPERL) ..\minimod.pl
cd .. && miniperl minimod.pl > lib\ExtUtils\Miniperl.pm
$(CC) -I..\x2p $(CFLAGS) $(OBJOUT_FLAG)$@ -c ..\x2p\walk.c
$(X2P) : $(MINIPERL) $(X2P_OBJ) Extensions
- $(MINIPERL) ..\x2p\find2perl.PL
- $(MINIPERL) ..\x2p\s2p.PL
+ $(MINIPERL) -I..\lib ..\x2p\find2perl.PL
+ $(MINIPERL) -I..\lib ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(X2P_OBJ),$@,,$(LIBFILES),)
.ENDIF
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
- copy splittree.pl ..
- $(MINIPERL) -I..\lib -I..\ext\Cwd ..\splittree.pl "../LIB" $(AUTODIR)
$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(EMBED_EXE_MANI)
.ENDIF
-$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM) Extensions_nonxs
- if not exist $(AUTODIR) mkdir $(AUTODIR)
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
- cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib XSLoader_pm.PL
- $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
- $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
- cd $(EXTDIR)\$(*B) && $(XSUBPP) dl_win32.xs > $(*B).c
- $(XCOPY) $(EXTDIR)\$(*B)\dlutils.c .
-
-$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
- copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-
MakePPPort: $(MINIPERL) $(CONFIGPM) Extensions_nonxs
$(MINIPERL) -I..\lib $(ICWD) ..\mkppport
-MakePPPort_clean:
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib $(ICWD) ..\mkppport --clean
-
#-------------------------------------------------------------------------------
-# The rule for $(DYNALOADER).c makes DynaLoader.pm, and that is needed for
-# ExtUtils::Mkbootstrap. There's no direct way to mark a dependency on
+# There's no direct way to mark a dependency on
# DynaLoader.pm, so this will have to do
-Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER).c
+Extensions : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic
-Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER).c
+Extensions_reonly : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) $(DYNALOADER)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynamic +re
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --dynamic +re
Extensions_static : ..\make_ext.pl list_static_libs.pl $(PERLDEP) $(CONFIGPM)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --static
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --static
$(MINIPERL) -I..\lib list_static_libs.pl > Extensions_static
Extensions_nonxs : ..\make_ext.pl $(PERLDEP) $(CONFIGPM)
$(XCOPY) ..\*.h $(COREDIR)\*.*
- $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --nonxs
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --nonxs
+
+$(DYNALOADER) : ..\make_ext.pl $(PERLDEP) $(CONFIGPM) Extensions_nonxs
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --dynaloader
Extensions_clean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=clean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=clean
Extensions_realclean :
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(EXTDIR) --all --target=realclean
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\make_ext.pl "MAKE=$(MAKE)" --dir=$(CPANDIR) --dir=$(DISTDIR) --dir=$(EXTDIR) --all --target=realclean
#-------------------------------------------------------------------------------
copy ..\README.vmesa ..\pod\perlvmesa.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl5110delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl5134delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
- cd ..\lib && $(PERLEXE) $(ICWD) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
$(PERLEXE) $(ICWD) ..\autodoc.pl ..
$(PERLEXE) $(ICWD) ..\pod\perlmodlib.pl -q
..\pod\perltoc.pod: $(PERLEXE) Extensions Extensions_nonxs
- $(PERLEXE) ..\pod\buildtoc --build-toc -q
+ $(PERLEXE) -f ..\pod\buildtoc --build-toc -q
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
$(PERLEXESTATIC) $(PERLSTATICLIB)
-del /f *.def *.map
- -del /f $(DYNALOADER).c
- -del /f $(EXTDIR)\DynaLoader\dl_win32.xs
- -del /f $(EXTDIR)\DynaLoader\DynaLoader.pm
- -del /f $(EXTDIR)\DynaLoader\XSLoader.pm
-del /f $(LIBDIR)\Encode.pm $(LIBDIR)\encoding.pm $(LIBDIR)\Errno.pm
-del /f $(LIBDIR)\Config.pod $(LIBDIR)\POSIX.pod $(LIBDIR)\threads.pm
-del /f $(LIBDIR)\.exists $(LIBDIR)\attributes.pm $(LIBDIR)\DynaLoader.pm
- -del /f $(LIBDIR)\XSLoader.pm $(LIBDIR)\lib.pm
-del /f $(LIBDIR)\Fcntl.pm $(LIBDIR)\IO.pm $(LIBDIR)\Opcode.pm
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
- -del /f $(LIBDIR)\Devel\PPPort.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
- -del /f $(LIBDIR)\Digest\MD5.pm
- -del /f $(LIBDIR)\Digest\SHA.pm
- -del /f $(LIBDIR)\PerlIO\encoding.pm
- -del /f $(LIBDIR)\PerlIO\scalar.pm
- -del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\Sys\Hostname.pm
- -del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
-del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
-del /f $(LIBDIR)\Win32CORE.pm
-del /f $(LIBDIR)\Win32API\File.pm
-del /f $(LIBDIR)\Win32API\File\cFile.pc
+ -del /f $(DISTDIR)\XSLoader\XSLoader.pm
+ -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
+ -if exist $(LIBDIR)\Archive rmdir /s /q $(LIBDIR)\Archive
+ -if exist $(LIBDIR)\Attribute rmdir /s /q $(LIBDIR)\Attribute
+ -if exist $(LIBDIR)\autodie rmdir /s /q $(LIBDIR)\autodie
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
+ -if exist $(LIBDIR)\CGI rmdir /s /q $(LIBDIR)\CGI
+ -if exist $(LIBDIR)\CPAN rmdir /s /q $(LIBDIR)\CPAN
+ -if exist $(LIBDIR)\CPANPLUS rmdir /s /q $(LIBDIR)\CPANPLUS
-if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
+ -if exist $(LIBDIR)\Devel rmdir /s /q $(LIBDIR)\Devel
+ -if exist $(LIBDIR)\Digest rmdir /s /q $(LIBDIR)\Digest
-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
- -if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
+ -if exist $(LIBDIR)\encoding rmdir /s /q $(LIBDIR)\encoding
+ -if exist $(LIBDIR)\ExtUtils\CBuilder rmdir /s /q $(LIBDIR)\ExtUtils\CBuilder
+ -if exist $(LIBDIR)\ExtUtils\Command rmdir /s /q $(LIBDIR)\ExtUtils\Command
+ -if exist $(LIBDIR)\ExtUtils\Constant rmdir /s /q $(LIBDIR)\ExtUtils\Constant
+ -if exist $(LIBDIR)\ExtUtils\Liblist rmdir /s /q $(LIBDIR)\ExtUtils\Liblist
+ -if exist $(LIBDIR)\ExtUtils\MakeMaker rmdir /s /q $(LIBDIR)\ExtUtils\MakeMaker
+ -if exist $(LIBDIR)\File\Spec rmdir /s /q $(LIBDIR)\File\Spec
+ -if exist $(LIBDIR)\Filter rmdir /s /q $(LIBDIR)\Filter
-if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
- -if exist $(LIBDIR)\App rmdir /s /q $(LIBDIR)\App
+ -if exist $(LIBDIR)\I18N\LangTags rmdir /s /q $(LIBDIR)\I18N\LangTags
+ -if exist $(LIBDIR)\inc rmdir /s /q $(LIBDIR)\inc
-if exist $(LIBDIR)\Module\Pluggable rmdir /s /q $(LIBDIR)\Module\Pluggable
- -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
- -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
- -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
- -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
- -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
+ -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
+ -if exist $(LIBDIR)\IPC rmdir /s /q $(LIBDIR)\IPC
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
+ -if exist $(LIBDIR)\Locale rmdir /s /q $(LIBDIR)\Locale
+ -if exist $(LIBDIR)\Log rmdir /s /q $(LIBDIR)\Log
+ -if exist $(LIBDIR)\Math rmdir /s /q $(LIBDIR)\Math
+ -if exist $(LIBDIR)\Memoize rmdir /s /q $(LIBDIR)\Memoize
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
+ -if exist $(LIBDIR)\mro rmdir /s /q $(LIBDIR)\mro
+ -if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+ -if exist $(LIBDIR)\Object rmdir /s /q $(LIBDIR)\Object
+ -if exist $(LIBDIR)\Package rmdir /s /q $(LIBDIR)\Package
+ -if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
+ -if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
+ -if exist $(LIBDIR)\PerlIO rmdir /s /q $(LIBDIR)\PerlIO
+ -if exist $(LIBDIR)\Pod\Perldoc rmdir /s /q $(LIBDIR)\Pod\Perldoc
+ -if exist $(LIBDIR)\Pod\Simple rmdir /s /q $(LIBDIR)\Pod\Simple
+ -if exist $(LIBDIR)\Pod\Text rmdir /s /q $(LIBDIR)\Pod\Text
-if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
+ -if exist $(LIBDIR)\TAP rmdir /s /q $(LIBDIR)\TAP
+ -if exist $(LIBDIR)\Term\UI rmdir /s /q $(LIBDIR)\Term\UI
+ -if exist $(LIBDIR)\Test rmdir /s /q $(LIBDIR)\Test
+ -if exist $(LIBDIR)\Thread rmdir /s /q $(LIBDIR)\Thread
-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
+ -if exist $(LIBDIR)\Unicode\Collate rmdir /s /q $(LIBDIR)\Unicode\Collate
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
-if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
- -cd $(PODDIR) && del /f *.html *.bat podchecker \
+ -cd $(PODDIR) && del /f *.html *.bat \
perlaix.pod perlamiga.pod perlapi.pod perlapollo.pod \
perlbeos.pod perlbs2000.pod perlce.pod perlcn.pod \
perlcygwin.pod perldelta.pod perldgux.pod perldos.pod \
perlmpeix.pod perlnetware.pod perlopenbsd.pod perlos2.pod \
perlos390.pod perlos400.pod perlplan9.pod perlqnx.pod \
perlriscos.pod perlsolaris.pod perlsymbian.pod perltoc.pod \
- perltru64.pod perltw.pod perluts.pod perlvmesa.pod perlvos.pod \
- perlwin32.pod \
+ perltru64.pod perltw.pod perluniprops.pod perluts.pod \
+ perlvmesa.pod perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
- podselect
+ podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
xsubpp instmodsh prove ptar ptardiff cpanp-run-perl cpanp cpan2dist shasum corelist config_data
-cd ..\x2p && del /f find2perl s2p psed *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
+ -del /f ..\config.sh perlmain.c dlutils.c config.h.new \
perlmainst.c
-del /f $(CONFIGPM)
-del /f ..\lib\Config_git.pl
-del /f bin\*.bat
-del /f perllibst.h
- -del /f perl.base
- -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
+ -del /f $(PERLEXE_RES) perl.base
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib ppport.h
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
+ -cd $(DISTDIR) && del /s *.def Makefile Makefile.old
+ -cd $(CPANDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
-if exist pod2htmd.tmp del pod2htmd.tmp
$(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
- copy splittree.pl ..
- $(MINIPERL) -I..\lib -I..\ext\Cwd ..\splittree.pl "../LIB" $(AUTODIR)
$(RCOPY) ..\lib $(INST_LIB)\*.*
-$(UNIDATAFILES) .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
+$(UNIDATAFILES) ..\pod\perluniprops.pod .UPDATEALL : $(MINIPERL) $(CONFIGPM) ..\lib\unicore\mktables Extensions_nonxs
cd ..\lib\unicore && \
- ..\$(MINIPERL) -I.. mktables
+ ..\$(MINIPERL) -I.. -I..\..\cpan\Cwd\lib -I..\..\cpan\Cwd mktables -P ..\..\pod -maketest -makelist -p
minitest : $(MINIPERL) $(GLOBEXE) $(CONFIGPM) $(UNIDATAFILES) utils
$(XCOPY) $(MINIPERL) ..\t\$(NULL)
.ELSE
$(XCOPY) $(GLOBEXE) ..\t\$(NULL)
.ENDIF
+.IF "$(CCTYPE)" == "GCC"
+.IF "$(GCC_4XX)" == "define"
+ $(XCOPY) $(GCCHELPERDLL) ..\t\$(NULL)
+.ENDIF
+.ENDIF
test : $(RIGHTMAKE) test-prep
cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
clean : Extensions_clean _clean
-realclean : Extensions_realclean MakePPPort_clean _clean
+realclean : Extensions_realclean _clean
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.