#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 through 6.0 (and possibly newer versions)
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
+# Visual C++ 2.0 or later
+# Borland C++ 5.02 or later
+# MinGW with gcc-2.95.2 or later
# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.9.2
+#INST_VER *= \5.9.5
#
# Comment this out if you DON'T want your perl installation to have
#INST_ARCH *= \$(ARCHNAME)
#
+# Uncomment this if you want perl to run
+# $Config{sitelibexp}\sitecustomize.pl
+# before anything else. This script can then be set up, for example,
+# to add additional entries to @INC.
+#
+#USE_SITECUST *= define
+
+#
# uncomment to enable multiple interpreters. This is need for fork()
# emulation and for thread support.
#
# Comment this out if you don't want to enable large file support for
# some reason. Should normally only be changed to maintain compatibility
# with an older release of perl.
-USE_LARGE_FILES *= define
+USE_LARGE_FILES *= define
#
# uncomment exactly one of the following
#CCTYPE *= MSVC20
# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
-# Visual C++ >= 6.x
+# Visual C++ 6.x (aka Visual C++ 98)
#CCTYPE *= MSVC60
+# Visual C++ Toolkit 2003 (aka Visual C++ 7.x) (free command-line tools)
+#CCTYPE *= MSVC70FREE
+# Visual C++ .NET 2003 (aka Visual C++ 7.x) (full version)
+#CCTYPE *= MSVC70
+# Visual C++ 2005 Express Edition (aka Visual C++ 8.x) (free version)
+#CCTYPE *= MSVC80FREE
+# Visual C++ 2005 (aka Visual C++ 8.x) (full version)
+#CCTYPE *= MSVC80
# Borland 5.02 or later
#CCTYPE *= BORLAND
# MinGW with gcc-2.95.2 or later
#
# uncomment this if your Borland compiler is older than v5.4.
-#BCCOLD = define
+#BCCOLD *= define
#
# uncomment this if you want to use Borland's VCL as your CRT
-#BCCVCL = define
+#BCCVCL *= define
#
# uncomment this if you are compiling under Windows 95/98 and command.com
#DEBUG_MSTATS *= define
#
+# set this to additionally provide a statically linked perl-static.exe.
+# Note that dynamic loading will not work with this perl, so you must
+# include required modules statically using STATIC_EXT variable below.
+# A static library perl59s.lib will also be created.
+# Ordinary perl.exe is not affected by this option.
+#
+#BUILD_STATIC *= define
+
+#
# set the install locations of the compiler include/libraries
# Running VCVARS32.BAT is *required* when using Visual C.
# Some versions of Visual C don't define MSVCDIR in the environment,
# not be quoted)
#
.IF "$(CCTYPE)" == "BORLAND"
-CCHOME *= C:\borland\bcc55
+CCHOME *= C:\Borland\BCC55
.ELIF "$(CCTYPE)" == "GCC"
CCHOME *= C:\MinGW
.ELSE
#
# Additional compiler flags can be specified here.
#
+BUILDOPT *= $(BUILDOPTEXTRA)
+
+#
+# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
+# internal hash function unless the PERL_HASH_SEED environment variable is set.
+# Alternatively, adding -DNO_HASH_SEED will completely disable the
+# randomization feature.
+# The latter is required to maintain binary compatibility with Perl 5.8.0.
+#
+#BUILDOPT += -DPERL_HASH_SEED_EXPLICIT
+#BUILDOPT += -DNO_HASH_SEED
#
# This should normally be disabled. Adding -DPERL_POLLUTE enables support
#
# This should normally be disabled. Enabling it causes perl to read scripts
# in text mode (which is the 5.005 behavior) and will break ByteLoader.
+#
#BUILDOPT += -DPERL_TEXTMODE_SCRIPTS
#
PERL_MALLOC *= undef
DEBUG_MSTATS *= undef
+USE_SITECUST *= undef
USE_MULTI *= undef
USE_ITHREADS *= undef
USE_IMP_SYS *= undef
USE_MULTI != define
.ENDIF
+.IF "$(USE_SITECUST)" == "define"
+BUILDOPT += -DUSE_SITECUSTOMIZE
+.ENDIF
+
.IF "$(USE_MULTI)" != "undef"
BUILDOPT += -DPERL_IMPLICIT_CONTEXT
.ENDIF
PROCESSOR_ARCHITECTURE *= x86
.IF "$(WIN64)" == ""
+# When we are running from a 32bit cmd.exe on AMD64 then
+# PROCESSOR_ARCHITECTURE is set to x86 and PROCESSOR_ARCHITEW6432
+# is set to AMD64
.IF "$(PROCESSOR_ARCHITEW6432)" != ""
PROCESSOR_ARCHITECTURE != $(PROCESSOR_ARCHITEW6432)
WIN64 = define
-.ELIF "$(PROCESSOR_ARCHITECTURE)" == "IA64"
+.ELIF "$(PROCESSOR_ARCHITECTURE)" == "AMD64" || "$(PROCESSOR_ARCHITECTURE)" == "IA64"
WIN64 = define
.ELSE
WIN64 = undef
.ENDIF
.ENDIF
+ARCHITECTURE = $(PROCESSOR_ARCHITECTURE)
+.IF "$(ARCHITECTURE)" == "AMD64"
+ARCHITECTURE = x64
+.ENDIF
+.IF "$(ARCHITECTURE)" == "IA64"
+ARCHITECTURE = ia64
+.ENDIF
+
.IF "$(USE_MULTI)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-multi
+ARCHNAME = MSWin32-$(ARCHITECTURE)-multi
.ELSE
.IF "$(USE_PERLIO)" == "define"
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)-perlio
+ARCHNAME = MSWin32-$(ARCHITECTURE)-perlio
.ELSE
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
+ARCHNAME = MSWin32-$(ARCHITECTURE)
.ENDIF
-ARCHNAME = MSWin32-$(PROCESSOR_ARCHITECTURE)
.ENDIF
.IF "$(USE_ITHREADS)" == "define"
ARCHNAME !:= $(ARCHNAME)-thread
.ENDIF
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
+# Visual C++ 98, .NET 2003 and 2005 specific.
+# VC++ 6.x, 7.x and 8.x can load DLL's on demand. Makes the test suite run in
+# about 10% less time. (The free version of 7.x can't do this, but the free
+# version of 8.x can.)
+.IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70" \
+ "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
.ENDIF
+
+# Visual C++ 2005 (VC++ 8.x) creates manifest files for EXEs and DLLs. These
+# either need copying everywhere with the binaries, or else need embedding in
+# them otherwise MSVCR80.dll won't be found. Embed them for simplicity, and
+# delete them afterwards so that they don't get installed too.
+.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
+EMBED_EXE_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;1 && \
+ del $@.manifest
+EMBED_DLL_MANI = mt -nologo -manifest $@.manifest -outputresource:$@;2 && \
+ del $@.manifest
.ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
EXTDIR = ..\ext
PODDIR = ..\pod
EXTUTILSDIR = $(LIBDIR)\ExtUtils
+HTMLDIR = .\html
#
INST_SCRIPT = $(INST_TOP)$(INST_VER)\bin
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
INST_HTML = $(INST_TOP)$(INST_VER)\html
#
.ELSE
LINK32 = tlink32
.ENDIF
-LIB32 = tlib /P128
+LIB32 = tlib /a /P128
IMPLIB = implib -c
-RSC = rc
+RSC = brcc32
#
# Options
CXX_FLAG = -P
LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
+
+# same libs as MSVC, except Borland doesn't have oldnames.lib
+LIBFILES = $(CRYPT_LIB) \
+ kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib \
+ import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
LINK_DBG =
.ENDIF
+EXTRACFLAGS =
CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
+ -L"$(CCLIBDIR)\PSDK"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
LIBOUT_FLAG =
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
- -lwinmm -lversion -lodbc32
+ -lwinmm -lversion -lodbc32 -lodbccp32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -s
.ENDIF
+EXTRACFLAGS =
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
LIBOUT_FLAG =
# NOTE: we assume that GCC uses MSVCRT.DLL
+# See comments about PERL_MSVCRT_READFIX in the "cl" compiler section below.
BUILDOPT += -fno-strict-aliasing -DPERL_MSVCRT_READFIX
.ELSE
DEFINES = -DWIN32 -D_CONSOLE -DNO_STRICT $(CRYPT_FLAG)
LOCDEFS = -DPERLDLL -DPERL_CORE
SUBSYS = console
-CXX_FLAG = -TP -GX
+CXX_FLAG = -TP -EHsc
.IF "$(USE_PERLCRT)" != "define"
LIBC = msvcrt.lib
.IF "$(WIN64)" == "define"
DEFINES += -DWIN64 -DCONSERVATIVE
-OPTIMIZE += -Wp64 -Op
+OPTIMIZE += -Wp64 -fp:precise
+.ENDIF
+
+# For now, silence VC++ 8.x's warnings about "unsafe" CRT functions and POSIX
+# CRT function names being deprecated.
+.IF "$(CCTYPE)" == "MSVC80" || "$(CCTYPE)" == "MSVC80FREE"
+DEFINES += -D_CRT_SECURE_NO_DEPRECATE -wd4996
.ENDIF
+# Use the MSVCRT read() fix if the PerlCRT was not chosen, but only when using
+# VC++ 6.x or earlier. Later versions use MSVCR70.dll, MSVCR71.dll, etc, which
+# do not require the fix.
+.IF "$(CCTYPE)" == "MSVC20" || "$(CCTYPE)" == "MSVC" || "$(CCTYPE)" == "MSVC60"
.IF "$(USE_PERLCRT)" != "define"
BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
+.ENDIF
LIBBASEFILES = $(CRYPT_LIB) \
oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib \
comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
- version.lib
+ version.lib odbc32.lib odbccp32.lib
-# win64 doesn't have some libs
-.IF "$(WIN64)" != "define"
-LIBBASEFILES += odbc32.lib odbccp32.lib
+# The 64 bit Platform SDK compilers contain a runtime library that doesn't
+# include the buffer overrun verification code used by the /GS switch.
+# Since the code links against libraries that are compiled with /GS, this
+# "security cookie verification" must be included via bufferoverlow.lib.
+.IF "$(WIN64)" == "define"
+LIBBASEFILES = $(LIBBASEFILES) bufferoverflowU.lib
.ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+EXTRACFLAGS = -nologo -GF -W3
+CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
-machine:$(PROCESSOR_ARCHITECTURE)
+LIB_FLAGS = -nologo
OBJOUT_FLAG = -Fo
EXEOUT_FLAG = -Fe
LIBOUT_FLAG = /out:
# require backslashes to be doubled-up when written to $(mktmp) files.
# Other dmake's do not require this and would actually output a double
# backslash if they were doubled-up.
-.IF "$(shell type $(mktmp \\))"=="\\"
+.IF "$(shell @type $(mktmp \\))"=="\\"
B=\\
.ELSE
B=\\\
.ENDIF
+# There is a related issue with other escape sequences: Sarathy's old
+# dmake automatically maps escape sequences like \n to their ASCII values
+# when used in macros, while other dmake's only do so if this behaviour
+# is explicitly requested with the :m modifier.
+DONTUSETHIS=\n
+.IF "$(shell @type $(mktmp \n))"=="\n"
+N=$(DONTUSETHIS:m)
+.ELSE
+N=$(DONTUSETHIS)
+.ENDIF
+
o *= .obj
a *= .lib
.ELSE
$(LINK32) -dll -subsystem:windows -implib:$(*B).lib -def:$(*B).def \
-out:$@ $(BLINK_FLAGS) $(LIBFILES) $< $(LIBPERL)
+ $(EMBED_DLL_MANI)
.ENDIF
.rc.res:
.IF "$(CCTYPE)" == "GCC"
- $(RSC) --use-temp-file -i $< -o $@
+ $(RSC) --use-temp-file -I . -I .. -O COFF -i $< -o $@
.ELSE
$(RSC) -i.. $<
.ENDIF
MINIDIR = .\mini
PERLEXE = ..\perl.exe
WPERLEXE = ..\wperl.exe
+PERLEXESTATIC = ..\perl-static.exe
GLOBEXE = ..\perlglob.exe
CONFIGPM = ..\lib\Config.pm ..\lib\Config_heavy.pl
MINIMOD = ..\lib\ExtUtils\Miniperl.pm
X2P = ..\x2p\a2p.exe
+.IF "$(BUILD_STATIC)" == "define"
+PERLSTATIC = static
+.ELSE
+PERLSTATIC =
+.ENDIF
# Unicode data files generated by mktables
UNIDATAFILES = ..\lib\unicore\Canonical.pl ..\lib\unicore\Exact.pl \
..\utils\pstruct \
..\utils\h2xs \
..\utils\perldoc \
- ..\utils\perlcc \
..\utils\perlivp \
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\config_data \
..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
..\utils\prove \
+ ..\utils\ptar \
+ ..\utils\ptardiff \
+ ..\utils\shasum \
..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
CFGSH_TMPL = config.gc
CFGH_TMPL = config_H.gc
PERLIMPLIB = ..\libperl59$(a)
+PERLSTATICLIB = ..\libperl59s$(a)
.ELSE
# makedef.pl must be updated if this changes, and this should normally
# only change when there is an incompatible revision of the public API.
PERLIMPLIB *= ..\perl59$(a)
+PERLSTATICLIB *= ..\perl59s$(a)
PERLDLL = ..\perl59.dll
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
-NOOP = @echo.
+XCOPY = xcopy /f /r /i /d /y
+RCOPY = xcopy /f /r /i /e /d /y
+NOOP = @rem
#
# filenames given to xsubpp must have forward slashes (since it puts
..\gv.c \
..\hv.c \
..\locale.c \
+ ..\mathoms.c \
..\mg.c \
..\numeric.c \
..\op.c \
..\perly.h \
..\pp.h \
..\proto.h \
+ ..\regcomp.h \
..\regexp.h \
..\scope.h \
..\sv.h \
PERLDLL_OBJ = $(CORE_OBJ)
PERLEXE_OBJ = perlmain$(o)
+PERLEXEST_OBJ = perlmainst$(o)
PERLDLL_OBJ += $(WIN32_OBJ) $(DLL_OBJ)
SETARGV_OBJ = setargv$(o)
.ENDIF
-DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
- Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
- Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
- Unicode/Normalize Win32
-STATIC_EXT =
-NONXS_EXT = Errno
+# specify static extensions here
+#STATIC_EXT = Cwd Compress/Raw/Zlib
+STATIC_EXT = Win32CORE
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# trying to fit them all on the command line)
archname=$(ARCHNAME) ~ \
cc=$(CC) ~ \
ld=$(LINK32) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
cf_email=$(EMAIL) ~ \
d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
usemultiplicity=$(USE_MULTI) ~ \
useperlio=$(USE_PERLIO) ~ \
uselargefiles=$(USE_LARGE_FILES) ~ \
+ usesitecustomize=$(USE_SITECUST) ~ \
LINK_FLAGS=$(LINK_FLAGS:s,\,$B,) ~ \
optimize=$(OPTIMIZE)
.IF "$(IS_WIN95)" == "define"
MK2 = .\makefile.95
RIGHTMAKE = __switch_makefiles
-NOOP = @rem
.ELSE
MK2 = __not_needed
RIGHTMAKE =
.ENDIF
+.IMPORT .IGNORE : SystemRoot windir
+
+# Don't just .IMPORT OS from the environment because dmake sets OS itself.
+ENV_OS=$(subst,OS=, $(shell @set OS))
+
+.IF "$(ENV_OS)" == "Windows_NT"
+ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
+.ELSE
+ODBCCP32_DLL = $(windir)\system\odbccp32.dll
+.ENDIF
+
#
# Top targets
#
all : .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
$(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
- $(X2P) Extensions
+ $(X2P) MakePPPort Extensions $(PERLSTATIC)
+
+..\regnodes.h : ..\regcomp.sym
+ cd .. && regcomp.pl && cd win32
+
+regnodes : ..\regnodes.h
+
+reonly : regnodes .\config.h $(GLOBEXE) $(MINIPERL) $(MK2) \
+ $(RIGHTMAKE) $(MINIMOD) $(CONFIGPM) $(UNIDATAFILES) $(PERLEXE) \
+ $(X2P) Extensions_reonly
$(DYNALOADER)$(o) : $(DYNALOADER).c $(CORE_H) $(EXTDIR)\DynaLoader\dlutils.c
+static: $(PERLEXESTATIC)
+
#----------------------------------------------------------------
#-------------------- BEGIN Win95 SPECIFIC ----------------------
.ELSE
$(LINK32) $(BLINK_FLAGS) $(LIBFILES) -out:$@ -subsystem:$(SUBSYS) \
perlglob$(o) setargv$(o)
+ $(EMBED_EXE_MANI)
.ENDIF
perlglob$(o) : perlglob.c
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
+ if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
+ cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -mconsole -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(MINI_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(MINI_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(MINI_OBJ:s,\,\\))
+ $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
+ @$(mktmp $(LIBFILES) $(MINI_OBJ:s,\,$B,))
+ $(EMBED_EXE_MANI)
.ENDIF
$(MINIDIR) :
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
- $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
- $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
.ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,\\)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
+ perldll.def$N)
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
$(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--base-file perl.base \
--output-exp perl.exp
$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,\\) \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs|tr \\\\ /) \
+ $(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
$(LIBFILES) perl.exp $(LKPOST))
.ELSE
- $(LINK32) -dll -def:perldll.def -out:$@ \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
- @$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
- $(PERLDLL_RES) $(PERLDLL_OBJ:s,\,\\))
+ $(LINK32) -dll -def:perldll.def -out:$@ $(BLINK_FLAGS) \
+ @Extensions_static \
+ @$(mktmp -base:0x28000000 $(DELAYLOAD) $(LIBFILES) \
+ $(PERLDLL_RES:s,\,$B,) $(PERLDLL_OBJ:s,\,$B,))
+ $(EMBED_DLL_MANI)
.ENDIF
$(XCOPY) $(PERLIMPLIB) $(COREDIR)
+$(PERLSTATICLIB): Extensions_static
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LIB32) $(LIB_FLAGS) $@ \
+ @$(mktmp $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLDLL_OBJ:s,\,$B,))
+.ELIF "$(CCTYPE)" == "GCC"
+# XXX: It would be nice if MinGW's ar accepted a temporary file, but this
+# doesn't seem to work:
+# $(LIB32) $(LIB_FLAGS) $@ \
+# $(mktmp $(LKPRE) $(subst,\,$B $(shell @type Extensions_static)) \
+# $(PERLDLL_OBJ:s,\,$B,) $(LKPOST))
+ $(LIB32) $(LIB_FLAGS) $@ \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLDLL_OBJ:s,\,$B,)
+.ELSE
+ $(LIB32) $(LIB_FLAGS) -out:$@ @Extensions_static \
+ @$(mktmp $(PERLDLL_OBJ:s,\,$B,))
+.ENDIF
+ $(XCOPY) $(PERLSTATICLIB) $(COREDIR)
-$(PERLEXE_ICO): $(MINIPERL) makeico.pl
- $(MINIPERL) makeico.pl > $@
+$(PERLEXE_ICO): $(MINIPERL) ..\uupacktool.pl $(PERLEXE_ICO).packd
+ $(MINIPERL) -I..\lib ..\uupacktool.pl -u $(PERLEXE_ICO).packd $(PERLEXE_ICO)
$(PERLEXE_RES): perlexe.rc $(PERLEXE_ICO)
$(MINIPERL) ..\x2p\s2p.PL
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,\\),$(@:s,\,\\),,$(LIBFILES),)
+ @$(mktmp c0x32$(o) $(X2P_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -v -o $@ $(BLINK_FLAGS) \
- $(mktmp $(LKPRE) $(X2P_OBJ:s,\,\\) $(LIBFILES) $(LKPOST))
+ $(mktmp $(LKPRE) $(X2P_OBJ:s,\,$B,) $(LIBFILES) $(LKPOST))
.ELSE
- $(LINK32) -subsystem:console -out:$@ \
- @$(mktmp $(BLINK_FLAGS) $(LIBFILES) $(X2P_OBJ:s,\,\\))
+ $(LINK32) -subsystem:console -out:$@ $(BLINK_FLAGS) \
+ @$(mktmp $(LIBFILES) $(X2P_OBJ:s,\,$B,))
+ $(EMBED_EXE_MANI)
.ENDIF
perlmain.c : runperl.c
perlmain$(o) : perlmain.c
$(CC) $(CFLAGS_O) -UPERLDLL $(OBJOUT_FLAG)$@ -c perlmain.c
+perlmainst.c : runperl.c
+ copy runperl.c perlmainst.c
+
+perlmainst$(o) : perlmainst.c
+ $(CC) $(CFLAGS_O) -DPERLDLL $(OBJOUT_FLAG)$@ -c perlmainst.c
+
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,\\)\n \
- $(@:s,\,\\),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(PERLIMPLIB:s,\,$B,) $(LIBFILES),$N \
+ $(PERLEXE_RES:s,\,$B,)$N)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
- $(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
+ $(PERLEXE_OBJ) $(PERLEXE_RES) $(PERLIMPLIB) $(LIBFILES)
.ELSE
$(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
$(LIBFILES) $(PERLEXE_OBJ) $(SETARGV_OBJ) $(PERLIMPLIB) $(PERLEXE_RES)
+ $(EMBED_EXE_MANI)
.ENDIF
copy $(PERLEXE) $(WPERLEXE)
$(MINIPERL) -I..\lib bin\exetype.pl $(WPERLEXE) WINDOWS
copy splittree.pl ..
$(MINIPERL) -I..\lib ..\splittree.pl "../LIB" $(AUTODIR)
+$(PERLEXESTATIC): $(PERLSTATICLIB) $(CONFIGPM) $(PERLEXEST_OBJ) $(PERLEXE_RES)
+.IF "$(CCTYPE)" == "BORLAND"
+ $(LINK32) -Tpe -ap $(BLINK_FLAGS) \
+ @$(mktmp c0x32$(o) $(PERLEXEST_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLSTATICLIB:s,\,$B,) $(LIBFILES),$N \
+ $(PERLEXE_RES:s,\,$B,)$N)
+.ELIF "$(CCTYPE)" == "GCC"
+ $(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
+ $(mktmp $(LKPRE) $(subst,\,$B $(shell @type Extensions_static)) \
+ $(PERLSTATICLIB:s,\,$B,) $(LIBFILES) $(PERLEXEST_OBJ) \
+ $(PERLEXE_RES:s,\,$B,) $(LKPOST))
+.ELSE
+ $(LINK32) -subsystem:console -out:$@ -stack:0x1000000 $(BLINK_FLAGS) \
+ @Extensions_static $(PERLSTATICLIB) \
+ $(LIBFILES) $(PERLEXEST_OBJ) $(SETARGV_OBJ) $(PERLEXE_RES)
+ $(EMBED_EXE_MANI)
+.ENDIF
+
$(DYNALOADER).c: $(MINIPERL) $(EXTDIR)\DynaLoader\dl_win32.xs $(CONFIGPM)
if not exist $(AUTODIR) mkdir $(AUTODIR)
cd $(EXTDIR)\$(*B) && ..\$(MINIPERL) -I..\..\lib $(*B)_pm.PL
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
+MakePPPort: $(MINIPERL) $(CONFIGPM)
+ $(MINIPERL) -I..\lib ..\mkppport
+
+MakePPPort_clean:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\mkppport --clean
+
+#-------------------------------------------------------------------------------
Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
+ -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
-Extensions_static : buildext.pl
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+Extensions_reonly : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic +re
+ -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic +re
-# Note: The next two targets explicitly remove a "blibdirs.exists" file that
-# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
+Extensions_static : buildext.pl $(PERLDEP) $(CONFIGPM)
+ $(XCOPY) ..\*.h $(COREDIR)\*.*
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
+ -if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
Extensions_clean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
+ -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
Extensions_realclean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
- -if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
+ -if exist $(MINIPERL) if exist ext $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
- $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=./html \
+ $(PERLEXE) -I..\lib ..\installhtml --podroot=.. --htmldir=$(HTMLDIR) \
--podpath=pod:lib:ext:utils --htmlroot="file://$(INST_HTML:s,:,|,)"\
--libpod=perlfunc:perlguts:perlvar:perlrun:perlop --recurse
copy ..\README.irix ..\pod\perlirix.pod
copy ..\README.jp ..\pod\perljp.pod
copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.linux ..\pod\perllinux.pod
copy ..\README.machten ..\pod\perlmachten.pod
copy ..\README.macos ..\pod\perlmacos.pod
copy ..\README.macosx ..\pod\perlmacosx.pod
copy ..\README.mint ..\pod\perlmint.pod
copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.os2 ..\pod\perlos2.pod
copy ..\README.os390 ..\pod\perlos390.pod
copy ..\README.os400 ..\pod\perlos400.pod
copy ..\README.plan9 ..\pod\perlplan9.pod
copy ..\README.qnx ..\pod\perlqnx.pod
+ copy ..\README.riscos ..\pod\perlriscos.pod
copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl592delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl595delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
-# the doubled rmdir calls are needed because older cmd shells
-# don't understand /q
distclean: realclean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
- $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
+ $(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD) \
+ $(PERLEXESTATIC) $(PERLSTATICLIB)
-del /f *.def *.map
-del /f $(DYNALOADER).c
-del /f $(EXTDIR)\DynaLoader\dl_win32.xs
-del /f $(LIBDIR)\ops.pm $(LIBDIR)\Safe.pm
-del /f $(LIBDIR)\SDBM_File.pm $(LIBDIR)\Socket.pm $(LIBDIR)\POSIX.pm
-del /f $(LIBDIR)\B.pm $(LIBDIR)\O.pm $(LIBDIR)\re.pm
- -del /f $(LIBDIR)\ByteLoader.pm
-del /f $(LIBDIR)\Devel\Peek.pm $(LIBDIR)\Devel\DProf.pm
-del /f $(LIBDIR)\Devel\PPPort.pm
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
-del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\Digest\SHA.pm
-del /f $(LIBDIR)\PerlIO\encoding.pm
-del /f $(LIBDIR)\PerlIO\scalar.pm
-del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
+ -del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
-del /f $(LIBDIR)\Win32.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
+ -del /f $(LIBDIR)\Win32CORE.pm
+ -del /f $(LIBDIR)\Win32API\File.pm
+ -del /f $(LIBDIR)\Win32API\File\cFile.pc
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
- -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
- -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
- -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
- -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+ -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
+ -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
+ -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
- -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\re rmdir /s /q $(LIBDIR)\re
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
- -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
- -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
- -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
- -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
+ -if exist $(LIBDIR)\Win32API rmdir /s /q $(LIBDIR)\Win32API
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
- perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
- perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
+ perljp.pod perlko.pod perllinux.pod perlmachten.pod \
+ perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
+ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+ perlos400.pod perlplan9.pod perlqnx.pod perlriscos.pod \
+ perlsolaris.pod perlsymbian.pod perltru64.pod perltw.pod \
perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
- perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove corelist
+ perldoc perlivp dprofpp libnetcfg enc2xs piconv cpan *.bat \
+ xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
-cd ..\x2p && del /f find2perl s2p psed *.bat
- -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
+ -del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new \
+ perlmainst.c
-del /f $(CONFIGPM)
-del /f bin\*.bat
-del /f perllibst.h
-del /f $(PERLEXE_ICO) perl.base
- -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ ren ..\lib\Net\Changes.libnet Changes.tenbil
+ ren ..\lib\Net\README.libnet README.tenbil
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
+ ren ..\lib\Net\Changes.tenbil Changes.libnet
+ ren ..\lib\Net\README.tenbil README.libnet
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
- -if exist $(AUTODIR) rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
- -if exist $(COREDIR) rmdir /s $(COREDIR)
+ -if exist pod2htmd.tmp del pod2htmd.tmp
+ -if exist pod2htmi.tmp del pod2htmi.tmp
+ -if exist $(HTMLDIR) rmdir /s /q $(HTMLDIR)
install : all installbare installhtml
installbare : $(RIGHTMAKE) utils
$(PERLEXE) ..\installperl
if exist $(WPERLEXE) $(XCOPY) $(WPERLEXE) $(INST_BIN)\*.*
+ if exist $(PERLEXESTATIC) $(XCOPY) $(PERLEXESTATIC) $(INST_BIN)\*.*
$(XCOPY) $(GLOBEXE) $(INST_BIN)\*.*
if exist ..\perl*.pdb $(XCOPY) ..\perl*.pdb $(INST_BIN)\*.*
if exist ..\x2p\a2p.pdb $(XCOPY) ..\x2p\a2p.pdb $(INST_BIN)\*.*
$(XCOPY) bin\*.bat $(INST_SCRIPT)\*.*
installhtml : doc
- $(RCOPY) html\*.* $(INST_HTML)\*.*
+ $(RCOPY) $(HTMLDIR)\*.* $(INST_HTML)\*.*
inst_lib : $(CONFIGPM)
copy splittree.pl ..
cd ..\t && \
$(MINIPERL) -I..\lib harness base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t
-test-prep : all utils
+unpack_files:
+ $(MINIPERL) -I..\lib ..\uupacktool.pl -u -d .. -m
+
+cleanup_unpacked_files:
+ -if exist $(MINIPERL) $(MINIPERL) -I..\lib ..\uupacktool.pl -c -d .. -m
+
+test-prep : all utils unpack_files
$(XCOPY) $(PERLEXE) ..\t\$(NULL)
$(XCOPY) $(PERLDLL) ..\t\$(NULL)
.IF "$(CCTYPE)" == "BORLAND"
test : $(RIGHTMAKE) test-prep
cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
+test-reonly : reonly utils
+ $(XCOPY) $(PERLEXE) ..\t\$(NULL)
+ $(XCOPY) $(PERLDLL) ..\t\$(NULL)
+ $(XCOPY) $(GLOBEXE) ..\t\$(NULL)
+ cd ..\t && \
+ $(PERLEXE) -I..\lib harness $(OPT) -re \bpat\b \breg \bre\b \bsubst \brxcode $(EXTRA) && \
+ cd ..\win32
+
+regen :
+ cd .. && regen.pl && cd win32
+
test-notty : test-prep
set PERL_SKIP_TTY_TEST=1 && \
cd ..\t && $(PERLEXE) -I.\lib harness $(TEST_SWITCHES) $(TEST_FILES)
.ENDIF
cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-# the doubled rmdir calls are needed because older cmd shells
-# don't understand /q
_clean :
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
-@erase perlglob$(o)
-@erase perlmain$(o)
+ -@erase perlmainst$(o)
-@erase config.w32
-@erase /f config.h
-@erase $(GLOBEXE)
-@erase $(PERLEXE)
-@erase $(WPERLEXE)
+ -@erase $(PERLEXESTATIC)
+ -@erase $(PERLSTATICLIB)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
- -if exist $(MINIDIR) rmdir /s $(MINIDIR)
-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
- -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
- -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
-@erase $(UNIDATAFILES)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase $(X2P_OBJ)
+ ren ..\lib\Net\Changes.libnet Changes.tenbil
+ ren ..\lib\Net\README.libnet README.tenbil
-@erase ..\*$(o) ..\*$(a) ..\*.exp *$(o) *$(a) *.exp *.res
+ ren ..\lib\Net\Changes.tenbil Changes.libnet
+ ren ..\lib\Net\README.tenbil README.libnet
-@erase ..\t\*.exe ..\t\*.dll ..\t\*.bat
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
+ -@erase *.tds
+ -@erase Extensions_static
+
+
-clean : Extensions_clean _clean
+_preclean : cleanup_unpacked_files
+
+clean : _preclean Extensions_clean _clean
-realclean : Extensions_realclean _clean
+realclean : _preclean Extensions_realclean MakePPPort_clean _clean
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
https://perl5.git.perl.org / perl5.git / blobdiff