# $Id: Head.U,v 3.0.1.9 1997/02/28 15:02:09 ram Exp $
#
-# Generated on Tue Jun 9 14:56:54 EDT 1998 [metaconfig 3.0 PL70]
+# Generated on Sun Nov 29 18:15:39 EET 1998 [metaconfig 3.0 PL70]
+# (with additional metaconfig patches by jhi@iki.fi)
cat >/tmp/c1$$ <<EOF
ARGGGHHHH!!!!!
;;
esac
+: if needed set CDPATH to a harmless value that is not chatty
+: avoid bash 2.02 problems with empty CDPATH.
+case "$CDPATH" in
+'') ;;
+*) case "$SHELL" in
+ *bash*) CDPATH='.' ;;
+ *) CDPATH='' ;;
+ esac
+ ;;
+esac
: Configure runs within the UU subdirectory
test -d UU || mkdir UU
-CDPATH='.'
cd UU && rm -f ./*
dynamic_ext=''
extensions=''
known_extensions=''
-static_ext=''
nonxs_ext=''
+static_ext=''
useopcode=''
useposix=''
d_bsd=''
cpprun=''
cppstdin=''
d_access=''
+d_accessx=''
d_alarm=''
d_attribut=''
d_bcmp=''
d_dlsymun=''
d_dosuid=''
d_suidsafe=''
+d_drand48proto=''
d_dup2=''
+d_eaccess=''
+d_endgrent=''
d_endhent=''
d_endnent=''
d_endpent=''
+d_endpwent=''
d_endsent=''
d_fchmod=''
d_fchown=''
d_flexfnam=''
d_flock=''
d_fork=''
+d_fseeko=''
d_fsetpos=''
+d_ftello=''
d_ftime=''
d_gettimeod=''
d_Gconvert=''
+d_getgrent=''
d_getgrps=''
d_gethbyaddr=''
d_gethbyname=''
d_getpbyname=''
d_getpbynumber=''
d_getprotoprotos=''
+d_getpwent=''
d_getsent=''
d_getservprotos=''
d_getsbyname=''
d_memset=''
d_mkdir=''
d_mkfifo=''
-d_mknod=''
d_mktime=''
d_msg=''
d_msgctl=''
d_pipe=''
d_poll=''
d_portable=''
+d_pthread_create_joinable=''
+pthread_create_joinable=''
d_pthread_yield=''
d_sched_yield=''
-d_pthreads_created_joinable=''
+sched_yield=''
d_readdir=''
d_rewinddir=''
d_seekdir=''
d_telldir=''
d_readlink=''
+d_readv=''
d_rename=''
d_rmdir=''
d_safebcpy=''
d_semop=''
d_setegid=''
d_seteuid=''
+d_setgrent=''
d_setgrps=''
d_sethent=''
d_setlinebuf=''
d_bsdsetpgrp=''
d_setpgrp=''
d_setprior=''
+d_setpwent=''
d_setregid=''
d_setresgid=''
d_setresuid=''
d_shmget=''
d_sigaction=''
d_sigsetjmp=''
+d_cmsghdr_s=''
+d_msg_ctrunc=''
+d_msg_dontroute=''
+d_msg_oob=''
+d_msg_peek=''
+d_msg_proxy=''
+d_msghdr_s=''
d_oldsock=''
+d_recvmsg=''
+d_scm_rights=''
+d_sendmsg=''
d_socket=''
d_sockpair=''
sockethdr=''
d_waitpid=''
d_wcstombs=''
d_wctomb=''
+d_writev=''
+d_dbmclose64=''
+d_dbminit64=''
+d_delete64=''
+d_fetch64=''
+d_firstkey64=''
+d_nextkey64=''
+d_store64=''
dlext=''
cccdlflags=''
ccdlflags=''
lddlflags=''
usedl=''
doublesize=''
+ebcdic=''
fpostype=''
gidtype=''
groupstype=''
h_fcntl=''
h_sysfile=''
+i_arpainet=''
db_hashtype=''
db_prefixtype=''
i_db=''
i_fcntl=''
i_float=''
i_gdbm=''
+d_grpasswd=''
i_grp=''
+d_int64t=''
+i_inttypes=''
i_limits=''
i_locale=''
+i_machcthr=''
i_malloc=''
i_math=''
i_memory=''
i_neterrno=''
i_niin=''
i_sysin=''
+i_poll=''
d_pwage=''
d_pwchange=''
d_pwclass=''
d_pwcomment=''
d_pwexpire=''
d_pwgecos=''
+d_pwpasswd=''
d_pwquota=''
i_pwd=''
i_sfio=''
i_stdlib=''
i_string=''
strings=''
+i_sysaccess=''
i_sysdir=''
i_sysfile=''
d_voidtty=''
i_sysndir=''
i_sysparam=''
i_sysresrc=''
+i_syssecrt=''
i_sysselct=''
i_sysstat=''
i_systimes=''
i_systypes=''
+d_iovec_s=''
+i_sysuio=''
i_sysun=''
i_syswait=''
i_sgtty=''
intsize=''
longsize=''
shortsize=''
+d_dirent64_s=''
+d_flock64_s=''
+d_fstat64=''
+d_ftruncate64=''
+d_ino64t=''
+d_lockf64=''
+d_lseek64=''
+d_lstat64=''
+d_off64t=''
+d_open64=''
+d_opendir64=''
+d_readdir64=''
+d_seekdir64=''
+d_stat64=''
+d_telldir64=''
+d_truncate64=''
libc=''
libperl=''
shrpenv=''
loclibpth=''
plibpth=''
xlibpth=''
+ignore_versioned_solibs=''
libs=''
lns=''
-devtype=''
+lseeksize=''
lseektype=''
make_set_make=''
d_mymalloc=''
package=''
spackage=''
pager=''
+apiversion=''
patchlevel=''
subversion=''
+version=''
perladmin=''
perlpath=''
pidtype=''
privlibexp=''
prototype=''
ptrsize=''
+drand01=''
randbits=''
+randfunc=''
+randseedtype=''
+seedfunc=''
installscript=''
scriptdir=''
scriptdirexp=''
+selectminbits=''
selecttype=''
sh=''
sig_name=''
sig_name_init=''
sig_num=''
+sig_num_init=''
installsitearch=''
sitearch=''
sitearchexp=''
startperl=''
startsh=''
stdchar=''
+d_fgetpos64=''
+d_fopen64=''
+d_freopen64=''
+d_fseek64=''
+d_fseeko64=''
+d_fsetpos64=''
+d_ftell64=''
+d_ftello64=''
+d_tmpfile64=''
sysman=''
+trnl=''
uidtype=''
+archname64=''
+use64bits=''
+usemultiplicity=''
nm_opt=''
nm_so_opt=''
runnm=''
eunicefix=/etc/unixtovms.exe
fi
+i_whoami=''
+: change the next line if compiling for Xenix/286 on Xenix/386
+xlibpth='/usr/lib/386 /lib/386'
+
+: Possible local library directories to search.
+loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
+loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
+
+: general looking path for locating libraries
+glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
+glibpth="$glibpth /lib /usr/lib $xlibpth"
+glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
+glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
+
+: Private path used by Configure to find libraries. Its value
+: is prepended to libpth. This variable takes care of special
+: machines, like the mips. Usually, it should be empty.
+plibpth=''
+
+: Possible local include directories to search.
+: Set locincpth to "" in a hint file to defeat local include searches.
+locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
+locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
+:
+: no include file wanted by default
+inclwanted=''
+
: list of known cpp symbols, sorted alphabetically
al="AMIX BIT_MSF BSD BSD4_3 BSD_NET2 CMU CRAY DGUX DOLPHIN DPX2"
al="$al GO32 GOULD_PN HP700 I386 I80960 I960 Lynx M68000 M68K MACH"
al="$al SYSTYPE_BSD SYSTYPE_SVR4 SYSTYPE_SYSV Tek4132 Tek4300"
al="$al UMAXV USGr4 USGr4_2 UTEK UTS UTek UnicomPBB UnicomPBD Utek"
al="$al VMS Xenix286"
-al="$al _AIX _AIX32 _AIX370 _AM29000 _COFF _CRAY _CX_UX _EPI"
-al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET"
+al="$al _AIX _AIX32 _AIX370 _AIX41 _AM29000 _COFF _CRAY _CX_UX _EPI"
+al="$al _IBMESA _IBMR2 _M88K _M88KBCS_TARGET _POWER"
al="$al _MIPSEB _MIPSEL _M_COFF _M_I86 _M_I86SM _M_SYS3"
al="$al _M_SYS5 _M_SYSIII _M_SYSV _M_UNIX _M_XENIX _NLS _PGC_ _R3000"
al="$al _SYSTYPE_BSD _SYSTYPE_BSD43 _SYSTYPE_SVR4"
al="$al u3b20d u3b5 ultrix unix unixpc unos vax venix vms"
al="$al xenix z8000"
-i_whoami=''
-: change the next line if compiling for Xenix/286 on Xenix/386
-xlibpth='/usr/lib/386 /lib/386'
-
-: Possible local library directories to search.
-loclibpth="/usr/local/lib /opt/local/lib /usr/gnu/lib"
-loclibpth="$loclibpth /opt/gnu/lib /usr/GNU/lib /opt/GNU/lib"
-
-: general looking path for locating libraries
-glibpth="/shlib /usr/shlib /lib/pa1.1 /usr/lib/large"
-glibpth="$glibpth /lib /usr/lib $xlibpth"
-glibpth="$glibpth /lib/large /usr/lib/small /lib/small"
-glibpth="$glibpth /usr/ccs/lib /usr/ucblib /usr/local/lib"
-
-: Private path used by Configure to find libraries. Its value
-: is prepended to libpth. This variable takes care of special
-: machines, like the mips. Usually, it should be empty.
-plibpth=''
-
-: default library list
-libswanted=''
-: full support for void wanted by default
-defvoidused=15
-
-: Possible local include directories to search.
-: Set locincpth to "" in a hint file to defeat local include searches.
-locincpth="/usr/local/include /opt/local/include /usr/gnu/include"
-locincpth="$locincpth /opt/gnu/include /usr/GNU/include /opt/GNU/include"
-:
-: no include file wanted by default
-inclwanted=''
-
: Trailing extension. Override this in a hint file, if needed.
_exe=''
: Extra object files, if any, needed on this platform.
archobjs=''
groupstype=''
+: default library list
+libswanted=''
+: some systems want to use only the non-versioned libso:s
+ignore_versioned_solibs=''
+: full support for void wanted by default
+defvoidused=15
+
: set useposix=false in your hint file to disable the POSIX extension.
useposix=true
: set useopcode=false in your hint file to disable the Opcode extension.
useopcode=true
+: set usemultiplicity on the Configure command line to enable multiplicity.
: set usethreads on the Configure command line to enable threads.
: List of libraries we want.
: If anyone needs -lnet, put it in a hint file.
$me: Fatal Error: I can't find a Bourne Shell anywhere.
Usually it's in /bin/sh. How did you even get this far?
-Please contact me (Andy Dougherty) at doughera@lafcol.lafayette.edu and
+Please contact me (Jarkko Hietaniemi) at jhi@iki.fi and
we'll try to straighten this all out.
EOM
exit 1
CONFIG=true
echo "Doing variable substitutions on .SH files..."
if test -f $src/MANIFEST; then
- set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH'`
+ set x `awk '{print $1}' <$src/MANIFEST | grep '\.SH$'`
else
echo "(Looking for .SH files under the source directory.)"
set x `(cd $src; find . -name "*.SH" -print)`
You have the option of continuing the configuration process, despite the
distinct possibility that your kit is damaged, by typing 'y'es. If you
do, don't blame me if something goes wrong. I advise you to type 'n'o
-and contact the author (doughera@lafcol.lafayette.edu).
+and contact the author (jhi@iki.fi).
EOM
echo $n "Continue? [n] $c" >&4
fi
rm -f missing x??
+echo " "
+: Find the appropriate value for a newline for tr
+if test -n "$DJGPP"; then
+ trnl='\012'
+fi
+if test X"$trnl" = X; then
+ case "`echo foo|tr '\n' x 2>/dev/null`" in
+ foox) trnl='\n' ;;
+ esac
+fi
+if test X"$trnl" = X; then
+ case "`echo foo|tr '\012' x 2>/dev/null`" in
+ foox) trnl='\012' ;;
+ esac
+fi
+if test X"$trnl" = X; then
+ cat <<EOM >&2
+
+$me: Fatal Error: cannot figure out how to translate newlines with 'tr'.
+
+EOM
+ exit 1
+fi
+
: compute the number of columns on the terminal for proper question formatting
case "$COLUMNS" in
'') COLUMNS='80';;
y)
echo "*** Substitution done -- please confirm."
xxxm="\$ans"
- ans=\`echo $n "\$ans$c" | tr '\012' ' '\`
+ ans=\`echo $n "\$ans$c" | tr '$trnl' ' '\`
xxxm="\$ans"
ans=!
;;
Unix system. If despite that it blows up on yours, your best bet is to edit
Configure and run it again. If you can't run Configure for some reason,
you'll have to generate a config.sh file by hand. Whatever problems you
-have, let me (doughera@lafcol.lafayette.edu) know how I blew it.
+have, let me (jhi@iki.fi) know how I blew it.
This installation script affects things in two ways:
cp
echo
expr
-find
grep
ls
make
egrep
gzip
less
-line
ln
more
nm
nroff
-perl
pg
-sendmail
tee
test
uname
: see whether [:lower:] and [:upper:] are supported character classes
echo " "
-up='[A-Z]'
-low='[a-z]'
case "`echo AbyZ | $tr '[:lower:]' '[:upper:]' 2>/dev/null`" in
ABYZ)
echo "Good, your tr supports [:lower:] and [:upper:] to convert case." >&4
up='[:upper:]'
low='[:lower:]'
;;
+*) # There is a discontinuity in EBCDIC between 'I' and 'J'
+ # (0xc9 and 0xd1), therefore that is a nice testing point.
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr '[I-J]' '[i-j]' 2>/dev/null`" in
+ ij) up='[A-Z]'
+ low='[a-z]'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr I-J i-j 2>/dev/null`" in
+ ij) up='A-Z'
+ low='a-z'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | od -x 2>/dev/null`" in
+ *C9D1*|*c9d1*)
+ echo "Hey, this might be EBCDIC." >&4
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr '[A-IJ-RS-Z]' '[a-ij-rs-z]' 2>/dev/null`" in
+ ij) up='[A-IJ-RS-Z]'
+ low='[a-ij-rs-z]'
+ ;;
+ esac
+ fi
+ if test "X$up" = X -o "X$low" = X; then
+ case "`echo IJ | $tr A-IJ-RS-Z a-ij-rs-z 2>/dev/null`" in
+ ij) up='A-IJ-RS-Z'
+ low='a-ij-rs-z'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ fi
+esac
+case "`echo IJ | $tr \"$up\" \"$low\" 2>/dev/null`" in
+ij)
+ echo "Using $up and $low to convert case." >&4
+ ;;
*)
- echo "Your tr only supports [a-z] and [A-Z] to convert case." >&4
- ;;
+ echo "I don't know how to translate letters from upper to lower case." >&4
+ echo "Your tr is not acting any way I know of." >&4
+ exit 1
+ ;;
esac
: set up the translation script tr, must be called with ./tr of course
cat >tr <<EOSC
case "$config_sh" in
'')
myuname=`( ($uname -a) 2>/dev/null || hostname) 2>&1`
+# tr '[A-Z]' '[a-z]' would not work in EBCDIC
+# because the A-Z/a-z are not consecutive.
myuname=`echo $myuname | $sed -e 's/^[^=]*=//' -e 's/\///g' | \
- ./tr '[A-Z]' '[a-z]' | tr '\012' ' '`
+ ./tr '[A-Z]' '[a-z]' | $tr $trnl ' '`
newmyuname="$myuname"
dflt=n
case "$knowitall" in
(cd $src/hints; ls -C *.sh) | $sed 's/\.sh/ /g' >&4
dflt=''
: Half the following guesses are probably wrong... If you have better
- : tests or hints, please send them to doughera@lafcol.lafayette.edu
+ : tests or hints, please send them to jhi@iki.fi
: The metaconfig authors would also appreciate a copy...
$test -f /irix && osname=irix
$test -f /xenix && osname=sco_xenix
$test -d /usr/apollo/bin && osname=apollo
$test -f /etc/saf/_sactab && osname=svr4
$test -d /usr/include/minix && osname=minix
- if $test -d /MachTen; then
+ if $test -d /MachTen -o -d /MachTen_Folder; then
osname=machten
if $test -x /sbin/version; then
osvers=`/sbin/version | $awk '{print $2}' |
osvers="$2.$3"
fi
fi
+ $test -f /sys/posix.dll &&
+ $test -f /usr/bin/what &&
+ set X `/usr/bin/what /sys/posix.dll` &&
+ $test "$3" = UWIN &&
+ osname=uwin &&
+ osvers="$5"
if $test -f $uname; then
set X $myuname
shift
osvers="$3"
;;
dynixptx*) osname=dynixptx
- osvers="$3"
+ osvers=`echo "$4"|sed 's/^v//'`
;;
freebsd) osname=freebsd
osvers="$3" ;;
genix) osname=genix ;;
hp*) osname=hpux
- case "$3" in
- *.08.*) osvers=9 ;;
- *.09.*) osvers=9 ;;
- *.10.*) osvers=10 ;;
- *.11.*) osvers=11 ;;
- *.12.*) osvers=12 ;;
- *) osvers="$3" ;;
- esac
+ osvers=`echo "$3" | $sed 's,.*\.\([0-9]*\.[0-9]*\),\1,'`
;;
irix*) osname=irix
case "$3" in
*) osvers="$3" ;;
esac
;;
- netbsd*) osname=netbsd
+ MiNT) osname=mint
+ ;;
+ netbsd*) osname=netbsd
osvers="$3"
;;
news-os) osvers="$3"
bsd386) osname=bsd386
osvers=`$uname -r`
;;
+ POSIX-BC | posix-bc ) osname=posix-bc
+ osvers="$3"
+ ;;
powerux | power_ux | powermax_os | powermaxos | \
powerunix | power_unix) osname=powerux
osvers="$3"
set d_oldpthreads
eval $setvar
+cat <<EOM
+
+Perl can be built so that multiple Perl interpreters can coexist
+within the same Perl executable. To do so, Configure must be run with
+-Dusemultiplicity.
+
+Normally you do not need this and you should answer no.
+
+EOM
+case "$usemultiplicity" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Build Perl for multiplicity?'
+. ./myread
+case "$ans" in
+y|Y) val="$define" ;;
+*) val="$undef" ;;
+esac
+set usemultiplicity
+eval $setvar
+
+cat <<EOM
+
+Perl can be built to take advantage of explicit 64-bit interfaces,
+on some systems. To do so, Configure must be run with -Duse64bits.
+
+If this doesn't make any sense to you, just accept the default 'n'.
+EOM
+case "$use64bits" in
+$define|true|[yY]*) dflt='y';;
+*) dflt='n';;
+esac
+rp='Try to use explicit 64-bit interfaces, if available?'
+. ./myread
+case "$ans" in
+y|Y)
+ val="$define"
+ ;;
+*)
+ val="$undef"
+ ;;
+esac
+set use64bits
+eval $setvar
+
+archname64=''
+
: determine the architecture name
echo " "
if xxx=`./loc arch blurfl $pth`; $test -f "$xxx"; then
archname=''
;;
esac
+myarchname="$tarch"
case "$archname" in
'') dflt="$tarch";;
*) dflt="$archname";;
esac
rp='What is your architecture name'
. ./myread
+archname="$ans"
case "$usethreads" in
-$define) echo "Threads selected." >&4
- case "$ans" in
- *-thread) echo "...and architecture name already ends in -thread." >&4
- archname="$ans"
- ;;
- *) archname="$ans-thread"
- echo "...setting architecture name to $archname." >&4
- ;;
- esac
- ;;
-*) archname="$ans" ;;
+$define)
+ echo "Threads selected." >&4
+ case "$archname" in
+ *-thread*) echo "...and architecture name already has -thread." >&4
+ ;;
+ *) archname="$archname-thread"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
esac
-myarchname="$tarch"
+case "$usemultiplicity" in
+$define)
+ echo "Multiplicity selected." >&4
+ case "$archname" in
+ *-multi*) echo "...and architecture name already has -multi." >&4
+ ;;
+ *) archname="$archname-multi"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+esac
+case "$use64bits" in
+$define)
+ echo "Explicit 64-bitness selected." >&4
+ case "$archname64" in
+ '')
+ ;;
+ *)
+ case "$archname" in
+ *-$archname64*) echo "...and architecture name already has $archname64." >&4
+ ;;
+ *) archname="$archname-$archname64"
+ echo "...setting architecture name to $archname." >&4
+ ;;
+ esac
+ ;;
+ esac
+esac
+
: is AFS running?
echo " "
case "$afs" in
case "$fn" in
*\(*)
- expr $fn : '.*(\(.*\)).*' | tr ',' '\012' >getfile.ok
+ expr $fn : '.*(\(.*\)).*' | tr ',' $trnl >getfile.ok
fn=`echo $fn | sed 's/(.*)//'`
;;
esac
esac;;
esac'
+: set the base revision
+baserev=5.0
+
+: get the patchlevel
+echo " "
+echo "Getting the current patchlevel..." >&4
+if $test -r $rsrc/patchlevel.h;then
+ patchlevel=`awk '/define[ ]+PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
+ subversion=`awk '/define[ ]+SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
+else
+ patchlevel=0
+ subversion=0
+fi
+$echo $n "(You have $package" $c
+case "$package" in
+"*$baserev") ;;
+*) $echo $n " $baserev" $c ;;
+esac
+$echo $n " patchlevel $patchlevel" $c
+test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
+echo ".)"
+
+if test 0 -eq "$subversion"; then
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel | \
+ $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+else
+ version=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel $subversion | \
+ $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
+fi
+: Figure out perl API version. Perhaps this should be in patchlevel.h
+if test "$subversion" -lt 50; then
+ apiversion=`LC_ALL=C; export LC_ALL; \
+ echo $baserev $patchlevel | \
+ $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
+else
+ apiversion="$version"
+fi
+
: determine where private library files go
-: Usual default is /usr/local/lib/perl5. Also allow things like
-: /opt/perl/lib, since /opt/perl/lib/perl5 would be redundant.
+: Usual default is /usr/local/lib/perl5/$version.
+: Also allow things like /opt/perl/lib/$version, since
+: /opt/perl/lib/perl5... would be redundant.
case "$prefix" in
-*perl*) set dflt privlib lib ;;
-*) set dflt privlib lib/$package ;;
+*perl*) set dflt privlib lib/$version ;;
+*) set dflt privlib lib/$package/$version ;;
esac
eval $prefixit
$cat <<EOM
installprivlib="$privlibexp"
fi
-: set the base revision
-baserev=5.0
-
-: get the patchlevel
-echo " "
-echo "Getting the current patchlevel..." >&4
-if $test -r $rsrc/patchlevel.h;then
- patchlevel=`awk '/define[ ]+PATCHLEVEL/ {print $3}' $rsrc/patchlevel.h`
- subversion=`awk '/define[ ]+SUBVERSION/ {print $3}' $rsrc/patchlevel.h`
-else
- patchlevel=0
- subversion=0
-fi
-$echo $n "(You have $package" $c
-case "$package" in
-"*$baserev") ;;
-*) $echo $n " $baserev" $c ;;
-esac
-$echo $n " patchlevel $patchlevel" $c
-test 0 -eq "$subversion" || $echo $n " subversion $subversion" $c
-echo ".)"
-
: set the prefixup variable, to restore leading tilda escape
prefixup='case "$prefixexp" in
"$prefix") ;;
: determine where public architecture dependent libraries go
set archlib archlib
eval $prefixit
+: privlib default is /usr/local/lib/$package/$version
+: archlib default is /usr/local/lib/$package/$version/$archname
+: privlib may have an optional trailing /share.
+tdflt=`echo $privlib | $sed 's,/share$,,'`
+tdflt=$tdflt/$archname
case "$archlib" in
-'')
- case "$privlib" in
- '') dflt=`./loc . "." $prefixexp/lib /usr/local/lib /usr/lib /lib`
- set dflt
- eval $prefixup
+'') dflt=$tdflt
;;
- *) if test 0 -eq "$subversion"; then
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel | \
- $awk '{ printf "%.3f\n", $1 + $2/1000.0 }'`
- else
- version=`LC_ALL=C; export LC_ALL; \
- echo $baserev $patchlevel $subversion | \
- $awk '{ printf "%.5f\n", $1 + $2/1000.0 + $3/100000.0 }'`
- fi
- dflt="$privlib/$archname/$version"
- ;;
- esac
- ;;
-*)
- dflt="$archlib"
+*) dflt="$archlib"
;;
esac
cat <<EOM
ABC.XYZ
EOT
cd ..
-echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+if test ! -f cppstdin; then
+ echo 'cat >.$$.c; '"$cc"' -E ${1+"$@"} .$$.c; rm .$$.c' >cppstdin
+else
+ echo "Keeping your $hint cppstdin wrapper."
+fi
chmod 755 cppstdin
wrapper=`pwd`/cppstdin
ok='false'
esac
for thislib in $libswanted; do
- if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`; $test -f "$xxx"; then
+ if xxx=`./loc lib$thislib.$so.[0-9]'*' X $libpth`;
+ $test -f "$xxx" -a "X$ignore_versioned_solibs" = "X"; then
echo "Found -l$thislib (shared)."
case " $dflt " in
*"-l$thislib "*);;
: coherency check
echo " "
echo "Checking your choice of C compiler and flags for coherency..." >&4
-set X $cc $optimize $ccflags $ldflags -o try try.c $libs
+$cat > try.c <<'EOF'
+#include <stdio.h>
+main() { printf("Ok\n"); exit(0); }
+EOF
+set X $cc $optimize $ccflags -o try $ldflags try.c $libs
shift
-$cat >try.msg <<EOM
-I've tried to compile and run a simple program with:
+$cat >try.msg <<'EOM'
+I've tried to compile and run the following simple program:
+
+EOM
+$cat try.c
+
+$cat >> try.msg <<EOM
+
+I used the command:
$*
./try
and I got the following output:
EOM
-$cat > try.c <<'EOF'
-#include <stdio.h>
-main() { printf("Ok\n"); exit(0); }
-EOF
dflt=y
-if sh -c "$cc $optimize $ccflags $ldflags -o try try.c $libs" >>try.msg 2>&1; then
+if sh -c "$cc $optimize $ccflags -o try $ldflags try.c $libs" >>try.msg 2>&1; then
if sh -c './try' >>try.msg 2>&1; then
xxx=`./try`
case "$xxx" in
$cat try.msg >&4
case "$knowitall" in
'')
- echo "(The supplied flags might be incorrect with this C compiler.)"
+ echo "(The supplied flags or libraries might be incorrect.)"
;;
*) dflt=n;;
esac
esac
$rm -f try try.* core
-: Cruising for prototypes
+: determine filename position in cpp output
echo " "
-echo "Checking out function prototypes..." >&4
-$cat >prototype.c <<'EOCP'
-main(int argc, char *argv[]) {
- exit(0);}
-EOCP
-if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
- echo "Your C compiler appears to support function prototypes."
- val="$define"
-else
- echo "Your C compiler doesn't seem to understand function prototypes."
- val="$undef"
-fi
-set prototype
-eval $setvar
-$rm -f prototype*
-
-case "$prototype" in
-"$define") ;;
-*) ansi2knr='ansi2knr'
- echo " "
- cat <<EOM >&4
-
-$me: FATAL ERROR:
-This version of $package can only be compiled by a compiler that
-understands function prototypes. Unfortunately, your C compiler
- $cc $ccflags
-doesn't seem to understand them. Sorry about that.
-
-If GNU cc is avaiable for your system, perhaps you could try that instead.
-
-Eventually, we hope to support building Perl with pre-ANSI compilers.
+echo "Computing filename position in cpp output for #include directives..." >&4
+echo '#include <stdio.h>' > foo.c
+$cat >fieldn <<EOF
+$startsh
+$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
+$grep '^[ ]*#.*stdio\.h' | \
+while read cline; do
+ pos=1
+ set \$cline
+ while $test \$# -gt 0; do
+ if $test -r \`echo \$1 | $tr -d '"'\`; then
+ echo "\$pos"
+ exit 0
+ fi
+ shift
+ pos=\`expr \$pos + 1\`
+ done
+done
+EOF
+chmod +x fieldn
+fieldn=`./fieldn`
+$rm -f foo.c fieldn
+case $fieldn in
+'') pos='???';;
+1) pos=first;;
+2) pos=second;;
+3) pos=third;;
+*) pos="${fieldn}th";;
+esac
+echo "Your cpp writes the filename in the $pos field of the line."
+
+: locate header file
+$cat >findhdr <<EOF
+$startsh
+wanted=\$1
+name=''
+if test -f $usrinc/\$wanted; then
+ echo "$usrinc/\$wanted"
+ exit 0
+fi
+awkprg='{ print \$$fieldn }'
+echo "#include <\$wanted>" > foo\$\$.c
+$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
+$grep "^[ ]*#.*\$wanted" | \
+while read cline; do
+ name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
+ case "\$name" in
+ */\$wanted) echo "\$name"; exit 0;;
+ *) name='';;
+ esac;
+done;
+$rm -f foo\$\$.c;
+case "\$name" in
+'') exit 1;;
+esac
+EOF
+chmod +x findhdr
+
+: define an alternate in-header-list? function
+inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
+cont=true; xxf="echo \"<\$1> found.\" >&4";
+case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
+*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
+esac;
+case $# in 4) instead=instead;; *) instead="at last";; esac;
+while $test "$cont"; do
+ xxx=`./findhdr $1`
+ var=$2; eval "was=\$$2";
+ if $test "$xxx" && $test -r "$xxx";
+ then eval $xxf;
+ eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
+ cont="";
+ else eval $xxnf;
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
+ set $yyy; shift; shift; yyy=$@;
+ case $# in 0) cont="";;
+ 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
+ xxnf="echo \"and I did not find <\$1> either.\" >&4";;
+ *) xxf="echo \"but I found <\$1\> instead.\" >&4";
+ xxnf="echo \"there is no <\$1>, ...\" >&4";;
+ esac;
+done;
+while $test "$yyy";
+do set $yyy; var=$2; eval "was=\$$2";
+ eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
+ set $yyy; shift; shift; yyy=$@;
+done'
+
+: see if this is a malloc.h system
+set malloc.h i_malloc
+eval $inhdr
+
+: see if stdlib is available
+set stdlib.h i_stdlib
+eval $inhdr
+
+: determine which malloc to compile in
+echo " "
+case "$usemymalloc" in
+''|[yY]*|true|$define) dflt='y' ;;
+*) dflt='n' ;;
+esac
+rp="Do you wish to attempt to use the malloc that comes with $package?"
+. ./myread
+usemymalloc="$ans"
+case "$ans" in
+y*|true)
+ usemymalloc='y'
+ mallocsrc='malloc.c'
+ mallocobj="malloc$_o"
+ d_mymalloc="$define"
+ case "$libs" in
+ *-lmalloc*)
+ : Remove malloc from list of libraries to use
+ echo "Removing unneeded -lmalloc from library list" >&4
+ set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
+ shift
+ libs="$*"
+ echo "libs = $libs" >&4
+ ;;
+ esac
+ ;;
+*)
+ usemymalloc='n'
+ mallocsrc=''
+ mallocobj=''
+ d_mymalloc="$undef"
+ ;;
+esac
+
+: compute the return types of malloc and free
+echo " "
+$cat >malloc.c <<END
+#$i_malloc I_MALLOC
+#$i_stdlib I_STDLIB
+#include <stdio.h>
+#include <sys/types.h>
+#ifdef I_MALLOC
+#include <malloc.h>
+#endif
+#ifdef I_STDLIB
+#include <stdlib.h>
+#endif
+#ifdef TRY_MALLOC
+void *malloc();
+#endif
+#ifdef TRY_FREE
+void free();
+#endif
+END
+case "$malloctype" in
+'')
+ if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
+ malloctype='void *'
+ else
+ malloctype='char *'
+ fi
+ ;;
+esac
+echo "Your system wants malloc to return '$malloctype', it would seem." >&4
+
+case "$freetype" in
+'')
+ if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
+ freetype='void'
+ else
+ freetype='int'
+ fi
+ ;;
+esac
+echo "Your system uses $freetype free(), it would seem." >&4
+$rm -f malloc.[co]
+: Cruising for prototypes
+echo " "
+echo "Checking out function prototypes..." >&4
+$cat >prototype.c <<'EOCP'
+main(int argc, char *argv[]) {
+ exit(0);}
+EOCP
+if $cc $ccflags -c prototype.c >prototype.out 2>&1 ; then
+ echo "Your C compiler appears to support function prototypes."
+ val="$define"
+else
+ echo "Your C compiler doesn't seem to understand function prototypes."
+ val="$undef"
+fi
+set prototype
+eval $setvar
+$rm -f prototype*
+
+case "$prototype" in
+"$define") ;;
+*) ansi2knr='ansi2knr'
+ echo " "
+ cat <<EOM >&4
+
+$me: FATAL ERROR:
+This version of $package can only be compiled by a compiler that
+understands function prototypes. Unfortunately, your C compiler
+ $cc $ccflags
+doesn't seem to understand them. Sorry about that.
+
+If GNU cc is available for your system, perhaps you could try that instead.
+
+Eventually, we hope to support building Perl with pre-ANSI compilers.
If you would like to help in that effort, please contact <perlbug@perl.org>.
Aborting Configure now.
: The messy sed command sorts on library version numbers.
$test -r $1 || \
set `echo blurfl; echo $xxx/libc.$so.[0-9]* | \
- tr ' ' '\012' | egrep -v '\.[A-Za-z]*$' | $sed -e '
+ tr ' ' $trnl | egrep -v '\.[A-Za-z]*$' | $sed -e '
h
s/[0-9][0-9]*/0000&/g
s/0*\([0-9][0-9][0-9][0-9][0-9]\)/\1/g
EOM
else
dflt=''
- echo $libpth | tr ' ' '\012' | sort | uniq > libpath
+ echo $libpth | tr ' ' $trnl | sort | uniq > libpath
cat >&4 <<EOM
I can't seem to find your C library. I've looked in the following places:
libc="$ans"
echo " "
-echo $libc $libnames | tr ' ' '\012' | sort | uniq > libnames
+echo $libc $libnames | tr ' ' $trnl | sort | uniq > libnames
set X `cat libnames`
shift
xxx=files
esac
$rm -f libnames libpath
-: determine filename position in cpp output
-echo " "
-echo "Computing filename position in cpp output for #include directives..." >&4
-echo '#include <stdio.h>' > foo.c
-$cat >fieldn <<EOF
-$startsh
-$cppstdin $cppflags $cppminus <foo.c 2>/dev/null | \
-$grep '^[ ]*#.*stdio\.h' | \
-while read cline; do
- pos=1
- set \$cline
- while $test \$# -gt 0; do
- if $test -r \`echo \$1 | $tr -d '"'\`; then
- echo "\$pos"
- exit 0
- fi
- shift
- pos=\`expr \$pos + 1\`
- done
-done
-EOF
-chmod +x fieldn
-fieldn=`./fieldn`
-$rm -f foo.c fieldn
-case $fieldn in
-'') pos='???';;
-1) pos=first;;
-2) pos=second;;
-3) pos=third;;
-*) pos="${fieldn}th";;
-esac
-echo "Your cpp writes the filename in the $pos field of the line."
-
-: locate header file
-$cat >findhdr <<EOF
-$startsh
-wanted=\$1
-name=''
-if test -f $usrinc/\$wanted; then
- echo "$usrinc/\$wanted"
- exit 0
-fi
-awkprg='{ print \$$fieldn }'
-echo "#include <\$wanted>" > foo\$\$.c
-$cppstdin $cppminus $cppflags < foo\$\$.c 2>/dev/null | \
-$grep "^[ ]*#.*\$wanted" | \
-while read cline; do
- name=\`echo \$cline | $awk "\$awkprg" | $tr -d '"'\`
- case "\$name" in
- */\$wanted) echo "\$name"; exit 0;;
- *) name='';;
- esac;
-done;
-$rm -f foo\$\$.c;
-case "\$name" in
-'') exit 1;;
-esac
-EOF
-chmod +x findhdr
-
-: define an alternate in-header-list? function
-inhdr='echo " "; td=$define; tu=$undef; yyy=$@;
-cont=true; xxf="echo \"<\$1> found.\" >&4";
-case $# in 2) xxnf="echo \"<\$1> NOT found.\" >&4";;
-*) xxnf="echo \"<\$1> NOT found, ...\" >&4";;
-esac;
-case $# in 4) instead=instead;; *) instead="at last";; esac;
-while $test "$cont"; do
- xxx=`./findhdr $1`
- var=$2; eval "was=\$$2";
- if $test "$xxx" && $test -r "$xxx";
- then eval $xxf;
- eval "case \"\$$var\" in $undef) . ./whoa; esac"; eval "$var=\$td";
- cont="";
- else eval $xxnf;
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu"; fi;
- set $yyy; shift; shift; yyy=$@;
- case $# in 0) cont="";;
- 2) xxf="echo \"but I found <\$1> $instead.\" >&4";
- xxnf="echo \"and I did not find <\$1> either.\" >&4";;
- *) xxf="echo \"but I found <\$1\> instead.\" >&4";
- xxnf="echo \"there is no <\$1>, ...\" >&4";;
- esac;
-done;
-while $test "$yyy";
-do set $yyy; var=$2; eval "was=\$$2";
- eval "case \"\$$var\" in $define) . ./whoa; esac"; eval "$var=\$tu";
- set $yyy; shift; shift; yyy=$@;
-done'
-
-: see if dld is available
-set dld.h i_dld
-eval $inhdr
+: see if dld is available
+set dld.h i_dld
+eval $inhdr
: is a C symbol defined?
csym='tlook=$1;
hpux) dflt='+z' ;;
next) dflt='none' ;;
irix*) dflt='-KPIC' ;;
- svr4*|esix*|solaris)
- case "$ccflags" in
- *-DDEBUGGING*) dflt='-KPIC' ;;
- *) dflt='-Kpic' ;;
- esac
- ;;
+ svr4*|esix*|solaris) dflt='-KPIC' ;;
sunos) dflt='-pic' ;;
*) dflt='none' ;;
esac
;;
*) case "$osname" in
- svr4*|esix*|solaris)
- case "$ccflags" in
- *-DDEBUGGING*) dflt='-fPIC' ;;
- *) dflt='-fpic' ;;
- esac
- ;;
+ svr4*|esix*|solaris) dflt='-fPIC' ;;
*) dflt='-fpic' ;;
esac ;;
esac ;;
+ ' ') dflt='none' ;;
*) dflt="$cccdlflags" ;;
esac
rp="Any special flags to pass to $cc -c to compile shared library modules?"
*) dflt="$lddlflags" ;;
esac
-: Try to guess additional flags to pick up local libraries.
-for thisflag in $ldflags; do
- case "$thisflag" in
- -L*)
- case " $dflt " in
- *" $thisflag "*) ;;
- *) dflt="$dflt $thisflag" ;;
+ : Try to guess additional flags to pick up local libraries.
+ for thisflag in $ldflags; do
+ case "$thisflag" in
+ -L*)
+ case " $dflt " in
+ *" $thisflag "*) ;;
+ *) dflt="$dflt $thisflag" ;;
+ esac
+ ;;
esac
- ;;
- esac
-done
+ done
-case "$dflt" in
-'') dflt='none' ;;
-esac
+ case "$dflt" in
+ ''|' ') dflt='none' ;;
+ esac
rp="Any special flags to pass to $ld to create a dynamically loaded library?"
. ./myread
sunos) dflt='none' ;;
*) dflt='none' ;;
esac ;;
+ ' ') dflt='none' ;;
*) dflt="$ccdlflags" ;;
esac
rp="Any special flags to pass to $cc to use dynamic loading?"
To build perl, you must add the current working directory to your
$xxx environment variable before running make. You can do
this with
- $xxx=\`pwd\`; export $xxx
+ $xxx=\`pwd\`:\$$xxx; export $xxx
for Bourne-style shells, or
setenv $xxx \`pwd\`
for Csh-style shells. You *MUST* do this before running make.
*) $cat >&4 <<EOM
WARNING: Use of the shrpdir variable for the installation location of
the shared $libperl is not supported. It was never documented and
-will not work in this version. Let me (doughera@lafcol.lafayette.edu)
+will not work in this version. Let me (jhi@iki.fi)
know of any problems this may cause.
EOM
fi
: determine where site specific libraries go.
-set sitelib sitelib
-eval $prefixit
-case "$sitelib" in
-'')
- prog=`echo $package | $sed 's/-*[0-9.]*$//'`
- dflt="$privlib/site_$prog" ;;
-*) dflt="$sitelib" ;;
+: Usual default is /usr/local/lib/perl5/site_perl/$apiversion
+prog=`echo $package | $sed 's/-*[0-9.]*$//'`
+case "$prefix" in
+*perl*) set dflt sitelib lib/site_$prog/$apiversion ;;
+*) set dflt sitelib lib/$package/site_$prog/$apiversion ;;
esac
+eval $prefixit
$cat <<EOM
The installation process will also create a directory for
fi
: determine where site specific architecture-dependent libraries go.
-xxx=`echo $sitelib/$archname | sed 's!^$prefix!!'`
-: xxx is usuually lib/site_perl/archname.
+: sitelib default is /usr/local/lib/perl5/site_perl/$apiversion
+: sitearch default is /usr/local/lib/perl5/site_perl/$apiversion/$archname
+: sitelib may have an optional trailing /share.
+tdflt=`echo $sitelib | $sed 's,/share$,,'`
+tdflt="$tdflt/$archname"
set sitearch sitearch none
eval $prefixit
case "$sitearch" in
-'') dflt="$sitelib/$archname" ;;
+'') dflt="$tdflt" ;;
*) dflt="$sitearch" ;;
esac
$cat <<EOM
eval $setvar
: Check how to convert floats to strings.
-echo " "
-echo "Checking for an efficient way to convert floats to strings."
-$cat >try.c <<'EOP'
+if test "X$d_Gconvert" = X; then
+ echo " "
+ echo "Checking for an efficient way to convert floats to strings."
+ $cat >try.c <<'EOP'
#ifdef TRY_gconvert
#define Gconvert(x,n,t,b) gconvert((x),(n),(t),(b))
char *myname = "gconvert";
exit(0);
}
EOP
-case "$d_Gconvert" in
-gconvert*) xxx_list='gconvert gcvt sprintf' ;;
-gcvt*) xxx_list='gcvt gconvert sprintf' ;;
-sprintf*) xxx_list='sprintf gconvert gcvt' ;;
-*) xxx_list='gconvert gcvt sprintf' ;;
-esac
+ case "$d_Gconvert" in
+ gconvert*) xxx_list='gconvert gcvt sprintf' ;;
+ gcvt*) xxx_list='gcvt gconvert sprintf' ;;
+ sprintf*) xxx_list='sprintf gconvert gcvt' ;;
+ *) xxx_list='gconvert gcvt sprintf' ;;
+ esac
-for xxx_convert in $xxx_list; do
- echo "Trying $xxx_convert"
- $rm -f try try$_o
- set try -DTRY_$xxx_convert
- if eval $compile; then
- echo "$xxx_convert" found. >&4
- if ./try; then
- echo "I'll use $xxx_convert to convert floats into a string." >&4
- break;
+ for xxx_convert in $xxx_list; do
+ echo "Trying $xxx_convert"
+ $rm -f try try$_o
+ set try -DTRY_$xxx_convert
+ if eval $compile; then
+ echo "$xxx_convert" found. >&4
+ if ./try; then
+ echo "I'll use $xxx_convert to convert floats into a string." >&4
+ break;
+ else
+ echo "...But $xxx_convert didn't work as I expected."
+ fi
else
- echo "...But $xxx_convert didn't work as I expected."
+ echo "$xxx_convert NOT found." >&4
fi
- else
- echo "$xxx_convert NOT found." >&4
- fi
-done
+ done
-case "$xxx_convert" in
-gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
-gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
-*) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
-esac
+ case "$xxx_convert" in
+ gconvert) d_Gconvert='gconvert((x),(n),(t),(b))' ;;
+ gcvt) d_Gconvert='gcvt((x),(n),(b))' ;;
+ *) d_Gconvert='sprintf((b),"%.*g",(n),(x))' ;;
+ esac
+fi
: Initialize h_fcntl
h_fcntl=false
esac
$rm -f access*
+: see if accessx exists
+set accessx d_accessx
+eval $inlibc
+
: see if alarm exists
set alarm d_alarm
eval $inlibc
set chsize d_chsize
eval $inlibc
+hasfield='varname=$1; struct=$2; field=$3; shift; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+echo "int main () { struct $struct foo; foo.$field = 0; }" >> try.c;
+if eval $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define";
+else
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c try.o'
+
+: see if this is a sys/uio.h system
+set sys/uio.h i_sysuio
+eval $inhdr
+
+echo "Checking to see if your system supports struct iovec..." >&4
+set d_iovec_s iovec iov_base $i_sysuio sys/uio.h
+eval $hasfield
+case "$d_iovec_s" in
+"$define") echo "Yup, it does." >&4
+ ;;
+*) echo "Nope, it doesn't." >&4
+ ;;
+esac
+
+socketlib=''
+sockethdr=''
+: see whether socket exists
+echo " "
+$echo $n "Hmm... $c" >&4
+if set socket val -f d_socket; eval $csym; $val; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ if set setsockopt val -f; eval $csym; $val; then
+ d_oldsock="$undef"
+ else
+ echo "...but it uses the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+else
+ if $contains socklib libc.list >/dev/null 2>&1; then
+ echo "Looks like you have Berkeley networking support." >&4
+ d_socket="$define"
+ : we will have to assume that it supports the 4.2 BSD interface
+ d_oldsock="$undef"
+ else
+ echo "You don't have Berkeley networking in libc$_a..." >&4
+ if test "X$d_socket" = "X$define"; then
+ echo "...but you seem to believe that you have sockets." >&4
+ else
+ for net in net socket
+ do
+ if test -f /usr/lib/lib$net$_a; then
+ ( ($nm $nm_opt /usr/lib/lib$net$_a | eval $nm_extract) || \
+ $ar t /usr/lib/lib$net$_a) 2>/dev/null >> libc.list
+ if $contains socket libc.list >/dev/null 2>&1; then
+ d_socket="$define"
+ socketlib="-l$net"
+ case "$net" in
+ net)
+ echo "...but the Wollongong group seems to have hacked it in." >&4
+ sockethdr="-I/usr/netinclude"
+ ;;
+ esac
+ echo "Found Berkeley sockets interface in lib$net." >& 4
+ if $contains setsockopt libc.list >/dev/null 2>&1; then
+ d_oldsock="$undef"
+ else
+ echo "...using the old BSD 4.1c interface, rather than 4.2." >&4
+ d_oldsock="$define"
+ fi
+ break
+ fi
+ fi
+ done
+ if test "X$d_socket" != "X$define"; then
+ echo "or anywhere else I see." >&4
+ d_socket="$undef"
+ d_oldsock="$undef"
+ fi
+ fi
+ fi
+fi
+
+: see if socketpair exists
+set socketpair d_sockpair
+eval $inlibc
+
+
+echo " "
+echo "Checking the availability of certain socket constants..." >& 4
+for ENUM in MSG_CTRUNC MSG_DONTROUTE MSG_OOB MSG_PEEK MSG_PROXY SCM_RIGHTS; do
+ enum=`$echo $ENUM|./tr '[A-Z]' '[a-z]'`
+ $cat >try.c <<EOF
+#include <sys/types.h>
+#include <sys/socket.h>
+int main() {
+ int i = $ENUM;
+}
+EOF
+ val="$undef"
+ set try; if eval $compile; then
+ val="$define"
+ fi
+ set d_${enum}; eval $setvar
+ $rm -f try.c try
+done
+
+set sendmsg d_sendmsg
+eval $inlibc
+
+set recvmsg d_recvmsg
+eval $inlibc
+
+echo " "
+$echo $n "Checking to see if your system supports struct msghdr...$c" >&4
+set d_msghdr_s msghdr msg_name define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
+eval $hasfield
+case "$d_msghdr_s" in
+"$define") echo "Yup, it does." >&4
+ ;;
+*) echo "Nope, it doesn't." >&4
+ ;;
+esac
+
+$echo $n "Checking to see if your system supports struct cmsghdr...$c" >&4
+set d_cmsghdr_s cmsghdr cmsg_len define sys/types.h $d_socket sys/socket.h $i_sysuio sys/uio.h
+eval $hasfield
+case "$d_cmsghdr_s" in
+"$define") echo "Yup, it does." >&4
+ ;;
+*) echo "Nope, it doesn't." >&4
+ ;;
+esac
+
: check for const keyword
echo " "
echo 'Checking to see if your C compiler knows about "const"...' >&4
set d_crypt
eval $setvar
+: get csh whereabouts
+case "$csh" in
+'csh') val="$undef" ;;
+*) val="$define" ;;
+esac
+set d_csh
+eval $setvar
+: Respect a hint or command line value for full_csh.
+case "$full_csh" in
+'') full_csh=$csh ;;
+esac
+
: see if cuserid exists
set cuserid d_cuserid
eval $inlibc
set d_dbl_dig
eval $setvar
+
+if $test X"$use64bits" = X"$define"; then
+ : see if dbminit64 exists
+ set dbminit64 d_dbminit64
+ eval $inlibc
+
+ : see if dbmclose64 exists
+ set dbmclose64 d_dbmclose64
+ eval $inlibc
+
+ : see if fetch64 exists
+ set fetch64 d_fetch64
+ eval $inlibc
+
+ : see if store64 exists
+ set store64 d_store64
+ eval $inlibc
+
+ : see if delete64 exists
+ set delete64 d_delete64
+ eval $inlibc
+
+ : see if firstkey64 exists
+ set firstkey64 d_firstkey64
+ eval $inlibc
+
+ : see if nextkey64 exists
+ set nextkey64 d_nextkey64
+ eval $inlibc
+else
+ val="$undef"
+ for xxx in d_dbminit64 d_dbmclose64 d_fetch64 d_store64 d_delete64 d_firstkey64 d_nextkey64
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
: see if difftime exists
set difftime d_difftime
eval $inlibc
+: see if sys/stat.h is available
+set sys/stat.h i_sysstat
+eval $inhdr
+
: see if this is a dirent system
echo " "
if xinc=`./findhdr dirent.h`; $test "$xinc"; then
eval $setvar
$rm -f try.c
-: see if dlerror exists
-xxx_runnm="$runnm"
-runnm=false
-set dlerror d_dlerror
-eval $inlibc
-runnm="$xxx_runnm"
-: see if dlfcn is available
-set dlfcn.h i_dlfcn
-eval $inhdr
+if $test X"$use64bits" = X"$define"; then
+ : see if fstat64 exists
+ set fstat64 d_fstat64
+ eval $inlibc
-case "$usedl" in
-$define|y|true)
- $cat << EOM
+ : see if ftruncate64 exists
+ set ftruncate64 d_ftruncate64
+ eval $inlibc
-On a few systems, the dynamically loaded modules that perl generates and uses
-will need a different extension than shared libs. The default will probably
-be appropriate.
+ : see if lockf64 exists
+ set lockf64 d_lockf64
+ eval $inlibc
-EOM
- case "$dlext" in
- '') dflt="$so" ;;
- *) dflt="$dlext" ;;
- esac
- rp='What is the extension of dynamically loaded modules'
- . ./myread
- dlext="$ans"
- ;;
-*)
- dlext="none"
- ;;
-esac
+ : see if lseek64 exists
+ set lseek64 d_lseek64
+ eval $inlibc
-: Check if dlsym need a leading underscore
-echo " "
-val="$undef"
+ : see if lstat64 exists
+ set lstat64 d_lstat64
+ eval $inlibc
-case "$dlsrc" in
-dl_dlopen.xs)
- echo "Checking whether your dlsym() needs a leading underscore ..." >&4
- $cat >dyna.c <<'EOM'
-fred () { }
-EOM
+ : see if open64 exists
+ set open64 d_open64
+ eval $inlibc
-$cat >fred.c<<EOM
+ : see if opendir64 exists
+ set opendir64 d_opendir64
+ eval $inlibc
-#include <stdio.h>
-#$i_dlfcn I_DLFCN
-#ifdef I_DLFCN
-#include <dlfcn.h> /* the dynamic linker include file for Sunos/Solaris */
-#else
-#include <sys/types.h>
-#include <nlist.h>
-#include <link.h>
-#endif
+ : see if readdir64 exists
+ set readdir64 d_readdir64
+ eval $inlibc
-extern int fred() ;
+ : see if seekdir64 exists
+ set seekdir64 d_seekdir64
+ eval $inlibc
-main()
-{
- void * handle ;
- void * symbol ;
-#ifndef RTLD_LAZY
- int mode = 1 ;
-#else
- int mode = RTLD_LAZY ;
-#endif
- handle = dlopen("./dyna.$dlext", mode) ;
+ : see if stat64 exists
+ set stat64 d_stat64
+ eval $inlibc
+
+ : see if telldir64 exists
+ set telldir64 d_telldir64
+ eval $inlibc
+
+ : see if truncate64 exists
+ set truncate64 d_truncate64
+ eval $inlibc
+
+ : check for off64_t
+ echo " "
+ echo $n "Checking to see if your system supports off64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+off64_t foo() { off64_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ set d_off64t
+ eval $setvar
+
+ : check for ino64_t
+ echo " "
+ echo $n "Checking to see if your system supports ino64_t...$c" >&4
+ val="$undef"
+ case "$i_sysstat" in
+ "$define" )
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#include <sys/stat.h>
+ino64_t foo() { ino64_t x; x = 7; return x; }'
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ fi
+ $rm -f try.*
+ ;;
+ esac
+ if $test "X$val" = X"$define"; then
+ echo " Yup, it does." >&4
+ else
+ echo " Nope, it doesn't." >&4
+ fi
+ set d_ino64t
+ eval $setvar
+
+ : check for struct flock64
+ echo " "
+ echo "Checking to see if your system supports struct flock64..." >&4
+ if $h_fcntl; then
+ set d_flock64_s flock64 l_len define fcntl.h
+ eval $hasfield
+ else
+ val="$undef"
+ set d_flock64_s
+ eval $setvar
+ fi
+ case "$d_flock64_s" in
+ "$define") echo "Yup, it does." >&4
+ ;;
+ *) echo "Nope, it doesn't." >&4
+ ;;
+ esac
+
+ : check for struct dirent64
+ echo " "
+ echo "Checking to see if your system supports struct dirent64..." >&4
+ set d_dirent64_s dirent64 d_off $i_dirent dirent.h
+ eval $hasfield
+ case "$d_dirent64_s" in
+ "$define") echo "Yup, it does." >&4
+ ;;
+ *) echo "Nope, it doesn't." >&4
+ ;;
+ esac
+
+else
+ val="$undef"
+ for xxx in d_fstat64 d_ftruncate64 d_lockf64 d_lseek64 d_lstat64 d_open64 d_opendir64 d_readdir64 d_seekdir64 d_stat64 d_telldir64 d_truncate64 d_off64t d_ino64t d_flock64_s d_dirent64_s
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
+: see if dlerror exists
+xxx_runnm="$runnm"
+runnm=false
+set dlerror d_dlerror
+eval $inlibc
+runnm="$xxx_runnm"
+
+: see if dlfcn is available
+set dlfcn.h i_dlfcn
+eval $inhdr
+
+case "$usedl" in
+$define|y|true)
+ $cat << EOM
+
+On a few systems, the dynamically loaded modules that perl generates and uses
+will need a different extension than shared libs. The default will probably
+be appropriate.
+
+EOM
+ case "$dlext" in
+ '') dflt="$so" ;;
+ *) dflt="$dlext" ;;
+ esac
+ rp='What is the extension of dynamically loaded modules'
+ . ./myread
+ dlext="$ans"
+ ;;
+*)
+ dlext="none"
+ ;;
+esac
+
+: Check if dlsym need a leading underscore
+echo " "
+val="$undef"
+
+case "$dlsrc" in
+dl_dlopen.xs)
+ echo "Checking whether your dlsym() needs a leading underscore ..." >&4
+ $cat >dyna.c <<'EOM'
+fred () { }
+EOM
+
+$cat >fred.c<<EOM
+
+#include <stdio.h>
+#$i_dlfcn I_DLFCN
+#ifdef I_DLFCN
+#include <dlfcn.h> /* the dynamic linker include file for Sunos/Solaris */
+#else
+#include <sys/types.h>
+#include <nlist.h>
+#include <link.h>
+#endif
+
+extern int fred() ;
+
+main()
+{
+ void * handle ;
+ void * symbol ;
+#ifndef RTLD_LAZY
+ int mode = 1 ;
+#else
+ int mode = RTLD_LAZY ;
+#endif
+ handle = dlopen("./dyna.$dlext", mode) ;
if (handle == NULL) {
printf ("1\n") ;
fflush (stdout) ;
if $cc $ccflags $cccdlflags -c dyna.c > /dev/null 2>&1 &&
mv dyna${_o} tmp-dyna${_o} > /dev/null 2>&1 &&
$ld $lddlflags -o dyna.$dlext tmp-dyna${_o} > /dev/null 2>&1 &&
- $cc $ccflags $ldflags $cccdlflags $ccdlflags fred.c -o fred $libs > /dev/null 2>&1; then
+ $cc $ccflags -o fred $ldflags $cccdlflags $ccdlflags fred.c $libs > /dev/null 2>&1; then
xxx=`./fred`
case $xxx in
1) echo "Test program failed using dlopen." >&4
set d_dlsymun
eval $setvar
+hasproto='varname=$1; func=$2; shift; shift;
+while $test $# -ge 2; do
+ case "$1" in
+ $define) echo "#include <$2>";;
+ esac ;
+ shift 2;
+done > try.c;
+$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
+if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
+ echo "$func() prototype found.";
+ val="$define";
+else
+ echo "$func() prototype NOT found.";
+ val="$undef";
+fi;
+set $varname;
+eval $setvar;
+$rm -f try.c tryout.c'
+
+: see if prototype for drand48 is available
+echo " "
+set d_drand48proto drand48 $i_stdlib stdlib.h $i_unistd unistd.h
+eval $hasproto
+
: see if dup2 exists
set dup2 d_dup2
eval $inlibc
+: see if eaccess exists
+set eaccess d_eaccess
+eval $inlibc
+
+: see if endgrent exists
+set endgrent d_endgrent
+eval $inlibc
+
: see if endhostent exists
set endhostent d_endhent
eval $inlibc
set endprotoent d_endpent
eval $inlibc
+: see if endpwent exists
+set endpwent d_endpwent
+eval $inlibc
+
: see if endservent exists
set endservent d_endsent
eval $inlibc
set fcntl d_fcntl
eval $inlibc
+: see if sys/select.h has to be included
+set sys/select.h i_sysselct
+eval $inhdr
+
+: see if we should include time.h, sys/time.h, or both
+echo " "
+if test "X$timeincl" = X; then
+ echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
+ $echo $n "I'm now running the test program...$c"
+ $cat >try.c <<'EOCP'
+#include <sys/types.h>
+#ifdef I_TIME
+#include <time.h>
+#endif
+#ifdef I_SYSTIME
+#ifdef SYSTIMEKERNEL
+#define KERNEL
+#endif
+#include <sys/time.h>
+#endif
+#ifdef I_SYSSELECT
+#include <sys/select.h>
+#endif
+main()
+{
+ struct tm foo;
+#ifdef S_TIMEVAL
+ struct timeval bar;
+#endif
+#ifdef S_TIMEZONE
+ struct timezone tzp;
+#endif
+ if (foo.tm_sec == foo.tm_sec)
+ exit(0);
+#ifdef S_TIMEVAL
+ if (bar.tv_sec == bar.tv_sec)
+ exit(0);
+#endif
+ exit(1);
+}
+EOCP
+ flags=''
+ for s_timezone in '-DS_TIMEZONE' ''; do
+ sysselect=''
+ for s_timeval in '-DS_TIMEVAL' ''; do
+ for i_systimek in '' '-DSYSTIMEKERNEL'; do
+ for i_time in '' '-DI_TIME'; do
+ for i_systime in '-DI_SYSTIME' ''; do
+ case "$flags" in
+ '') $echo $n ".$c"
+ set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
+ if eval $compile; then
+ set X $i_time $i_systime $i_systimek $sysselect $s_timeval
+ shift
+ flags="$*"
+ echo " "
+ $echo $n "Succeeded with $flags$c"
+ fi
+ ;;
+ esac
+ done
+ done
+ done
+ done
+ done
+ timeincl=''
+ echo " "
+ case "$flags" in
+ *SYSTIMEKERNEL*) i_systimek="$define"
+ timeincl=`./findhdr sys/time.h`
+ echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
+ *) i_systimek="$undef";;
+ esac
+ case "$flags" in
+ *I_TIME*) i_time="$define"
+ timeincl=`./findhdr time.h`" $timeincl"
+ echo "We'll include <time.h>." >&4;;
+ *) i_time="$undef";;
+ esac
+ case "$flags" in
+ *I_SYSTIME*) i_systime="$define"
+ timeincl=`./findhdr sys/time.h`" $timeincl"
+ echo "We'll include <sys/time.h>." >&4;;
+ *) i_systime="$undef";;
+ esac
+ $rm -f try.c try
+fi
+
+: check for fd_set items
+$cat <<EOM
+
+Checking to see how well your C compiler handles fd_set and friends ...
+EOM
+$cat >fd_set.c <<EOCP
+#$i_systime I_SYS_TIME
+#$i_sysselct I_SYS_SELECT
+#$d_socket HAS_SOCKET
+#include <sys/types.h>
+#ifdef HAS_SOCKET
+#include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
+#endif
+#ifdef I_SYS_TIME
+#include <sys/time.h>
+#endif
+#ifdef I_SYS_SELECT
+#include <sys/select.h>
+#endif
+main() {
+ fd_set fds;
+
+#ifdef TRYBITS
+ if(fds.fds_bits);
+#endif
+
+#if defined(FD_SET) && defined(FD_CLR) && defined(FD_ISSET) && defined(FD_ZERO)
+ exit(0);
+#else
+ exit(1);
+#endif
+}
+EOCP
+set fd_set -DTRYBITS
+if eval $compile; then
+ d_fds_bits="$define"
+ d_fd_set="$define"
+ echo "Well, your system knows about the normal fd_set typedef..." >&4
+ if ./fd_set; then
+ echo "and you have the normal fd_set macros (just as I'd expect)." >&4
+ d_fd_macros="$define"
+ else
+ $cat >&4 <<'EOM'
+but not the normal fd_set macros! Gaaack! I'll have to cover for you.
+EOM
+ d_fd_macros="$undef"
+ fi
+else
+ $cat <<'EOM'
+Hmm, your compiler has some difficulty with fd_set. Checking further...
+EOM
+ set fd_set
+ if eval $compile; then
+ d_fds_bits="$undef"
+ d_fd_set="$define"
+ echo "Well, your system has some sort of fd_set available..." >&4
+ if ./fd_set; then
+ echo "and you have the normal fd_set macros." >&4
+ d_fd_macros="$define"
+ else
+ $cat <<'EOM'
+but not the normal fd_set macros! Gross! More work for me...
+EOM
+ d_fd_macros="$undef"
+ fi
+ else
+ echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
+ d_fd_set="$undef"
+ d_fds_bits="$undef"
+ d_fd_macros="$undef"
+ fi
+fi
+$rm -f fd_set*
+
: see if fgetpos exists
set fgetpos d_fgetpos
eval $inlibc
+
+if $test X"$use64bits" = X"$define"; then
+ : see if fgetpos64 exists
+ set fgetpos64 d_fgetpos64
+ eval $inlibc
+
+ : see if fopen64 exists
+ set freopen64 d_fopen64
+ eval $inlibc
+
+ : see if freopen64 exists
+ set freopen64 d_freopen64
+ eval $inlibc
+
+ : see if fseek64 exists
+ set fseek64 d_fseek64
+ eval $inlibc
+
+ : see if fseeko64 exists
+ set fseeko64 d_fseeko64
+ eval $inlibc
+
+ : see if fsetpos64 exists
+ set fsetpos64 d_fsetpos64
+ eval $inlibc
+
+ : see if ftell64 exists
+ set ftell64 d_ftell64
+ eval $inlibc
+
+ : see if ftello64 exists
+ set ftello64 d_ftello64
+ eval $inlibc
+
+ : see if tmpfile64 exists
+ set tmpfile64 d_tmpfile64
+ eval $inlibc
+else
+ val="$undef"
+ for xxx in d_fgetpos64 d_fopen64 d_freopen64 d_fseek64 d_fseeko64 d_fsetpos64 d_ftell64 d_ftello64 d_tmpfile64
+ do
+ set $xxx
+ eval $setvar
+ done
+fi
+
: see if flock exists
set flock d_flock
eval $inlibc
set fpathconf d_fpathconf
eval $inlibc
+: see if fseeko exists
+set fseeko d_fseeko
+eval $inlibc
+
: see if fsetpos exists
set fsetpos d_fsetpos
eval $inlibc
+: see if ftello exists
+set ftello d_ftello
+eval $inlibc
+
+: see if getgrent exists
+set getgrent d_getgrent
+eval $inlibc
+
: see if gethostbyaddr exists
set gethostbyaddr d_gethbyaddr
eval $inlibc
set gethostent d_gethent
eval $inlibc
-hasproto='varname=$1; func=$2; shift; shift;
-while $test $# -ge 2; do
- case "$1" in
- $define) echo "#include <$2>";;
- esac ;
- shift 2;
-done > try.c;
-$cppstdin $cppflags $cppminus < try.c > tryout.c 2>/dev/null;
-if $contains "$func.*(" tryout.c >/dev/null 2>&1; then
- echo "$func() prototype found.";
- val="$define";
-else
- echo "$func() prototype NOT found.";
- val="$undef";
-fi;
-set $varname;
-eval $setvar;
-$rm -f try.c tryout.c'
+: see how we will look up host name
+echo " "
+if false; then
+ : dummy stub to allow use of elif
+elif set gethostname val -f d_gethname; eval $csym; $val; then
+ echo 'gethostname() found.' >&4
+ d_gethname="$define"
+ call=gethostname
+elif set uname val -f d_uname; eval $csym; $val; then
+ if ./xenix; then
+ $cat <<'EOM'
+uname() was found, but you're running xenix, and older versions of xenix
+have a broken uname(). If you don't really know whether your xenix is old
+enough to have a broken system call, use the default answer.
+
+EOM
+ dflt=y
+ case "$d_uname" in
+ "$define") dflt=n;;
+ esac
+ rp='Is your uname() broken?'
+ . ./myread
+ case "$ans" in
+ n*) d_uname="$define"; call=uname;;
+ esac
+ else
+ echo 'uname() found.' >&4
+ d_uname="$define"
+ call=uname
+ fi
+fi
+case "$d_gethname" in
+'') d_gethname="$undef";;
+esac
+case "$d_uname" in
+'') d_uname="$undef";;
+esac
+case "$d_uname$d_gethname" in
+*define*)
+ dflt=n
+ cat <<EOM
+
+Every now and then someone has a $call() that lies about the hostname
+but can't be fixed for political or economic reasons. If you wish, I can
+pretend $call() isn't there and maybe compute hostname at run-time
+thanks to the '$phostname' command.
+
+EOM
+ rp="Shall I ignore $call() from now on?"
+ . ./myread
+ case "$ans" in
+ y*) d_uname="$undef" d_gethname="$undef"; $echo $n "Okay...$c";;
+ esac;;
+esac
+case "$phostname" in
+'') aphostname='';;
+*) case "$aphostname" in
+ /*) ;;
+ *) set X $phostname
+ shift
+ file=$1
+ shift
+ file=`./loc $file $file $pth`
+ aphostname=`echo $file $*`
+ ;;
+ esac
+ ;;
+esac
+case "$d_uname$d_gethname" in
+*define*) ;;
+*)
+ case "$phostname" in
+ '')
+ echo "There will be no way for $package to get your hostname." >&4;;
+ *)
+ echo "I'll use 'popen("'"'$aphostname'", "r")'"' to get your hostname." >&4
+ ;;
+ esac;;
+esac
+case "$d_phostname" in
+'') d_phostname="$undef";;
+esac
: see if this is a netdb.h system
set netdb.h i_netdb
set d_getprotoprotos getprotoent $i_netdb netdb.h
eval $hasproto
+: see if getpwent exists
+set getpwent d_getpwent
+eval $inlibc
+
: see if getservbyname exists
set getservbyname d_getsbyname
set d_getservprotos getservent $i_netdb netdb.h
eval $hasproto
-: see if gettimeofday or ftime exists
-set gettimeofday d_gettimeod
-eval $inlibc
-case "$d_gettimeod" in
-"$undef")
- set ftime d_ftime
- eval $inlibc
+: see if gettimeofday or ftime exists
+set gettimeofday d_gettimeod
+eval $inlibc
+case "$d_gettimeod" in
+"$undef")
+ set ftime d_ftime
+ eval $inlibc
+ ;;
+*)
+ val="$undef"; set d_ftime; eval $setvar
+ ;;
+esac
+case "$d_gettimeod$d_ftime" in
+"$undef$undef")
+ echo " "
+ echo 'No ftime() nor gettimeofday() -- timing may be less accurate.' >&4
+ ;;
+esac
+
+: see if this is an grp system
+set grp.h i_grp
+eval $inhdr
+
+case "$i_grp" in
+$define)
+ xxx=`./findhdr grp.h`
+ $cppstdin $cppflags $cppminus < $xxx >$$.h
+
+ if $contains 'gr_passwd' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_grpasswd
+ eval $setvar
+
+ $rm -f $$.h
;;
*)
- val="$undef"; set d_ftime; eval $setvar
- ;;
-esac
-case "$d_gettimeod$d_ftime" in
-"$undef$undef")
- echo " "
- echo 'No ftime() nor gettimeofday() -- timing may be less accurate.' >&4
+ val="$undef";
+ set d_grpasswd; eval $setvar
;;
esac
set netinet/in.h i_niin sys/in.h i_sysin
eval $inhdr
+: see if arpa/inet.h has to be included
+set arpa/inet.h i_arpainet
+eval $inhdr
+
: see if htonl --and friends-- exists
val=''
set htonl val
#include <sys/types.h>
#$i_niin I_NETINET_IN
#$i_sysin I_SYS_IN
+#$i_arpainet I_ARPA_INET
#ifdef I_NETINET_IN
#include <netinet/in.h>
#endif
#ifdef I_SYS_IN
#include <sys/in.h>
#endif
+#ifdef I_ARPA_INET
+#include <arpa/inet.h>
+#endif
#ifdef htonl
printf("Defined as a macro.");
#endif
set inet_aton d_inetaton
eval $inlibc
+: see if inttypes.h is available
+: we want a real compile instead of Inhdr because some systems
+: have an inttypes.h which includes non-existent headers
+echo " "
+$cat >try.c <<EOCP
+#include <inttypes.h>
+main() {
+ static int32_t foo32 = 0x12345678;
+}
+EOCP
+set try
+if eval $compile; then
+ echo "<inttypes.h> found." >&4
+ val="$define"
+else
+ echo "<inttypes.h> NOT found." >&4
+ val="$undef"
+fi
+$rm -f try.c try
+set i_inttypes
+eval $setvar
+
+: check for int64_t
+case "$use64bits" in
+"$define" )
+ echo " "
+ echo $n "Checking to see if your system supports int64_t...$c" >&4
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_inttypes I_INTTYPES
+#ifdef I_INTTYPES
+#include <inttypes.h>
+#endif
+int64_t foo() { int64_t x; x = 7; return x; }
+EOCP
+ if $cc $optimize $ccflags -c try.c >/dev/null 2>&1; then
+ val="$define"
+ echo " Yup, it does." >&4
+ else
+ val="$undef"
+ echo " Nope, it doesn't." >&4
+ fi
+ $rm -f try.*
+ ;;
+*) val="$undef"
+ ;;
+esac
+set d_int64t
+eval $setvar
+
+
: Look for isascii
echo " "
$cat >isascii.c <<'EOCP'
set lockf d_lockf
eval $inlibc
+: check for length of double
+echo " "
+case "$doublesize" in
+'')
+ $echo $n "Checking to see how big your double precision numbers are...$c" >&4
+ $cat >try.c <<'EOCP'
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof(double));
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ doublesize=`./try`
+ $echo " $doublesize bytes." >&4
+ else
+ dflt='8'
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of a double precision number (in bytes)?"
+ . ./myread
+ doublesize="$ans"
+ fi
+ ;;
+esac
+$rm -f try.c try
+
: check for long doubles
echo " "
echo $n "Checking to see if your system supports long doubles...$c" >&4
. ./myread
longdblsize="$ans"
fi
+ if $test "X$doublesize" = "X$longdblsize"; then
+ echo "(That isn't any different from an ordinary double.)"
+ fi
;;
esac
$rm -f try.c try
. ./myread
longlongsize="$ans"
fi
+ if $test "X$longsize" = "X$longlongsize"; then
+ echo "(That isn't any different from an ordinary long.)"
+ fi
;;
esac
$rm -f try.c try
set mkfifo d_mkfifo
eval $inlibc
-: see if mknod exists
-set mknod d_mknod
-eval $inlibc
-
: see if mktime exists
set mktime d_mktime
eval $inlibc
case "$d_msgctl$d_msgget$d_msgsnd$d_msgrcv" in
*"$undef"*) h_msg=false;;
esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the msg*(2) configured." >&4
+ h_msg=false
+ val="$undef"
+ set msgctl d_msgctl
+ eval $setvar
+ set msgget d_msgget
+ eval $setvar
+ set msgsnd d_msgsnd
+ eval $setvar
+ set msgrcv d_msgrcv
+ eval $setvar
+ ;;
+ esac
+ ;;
+esac
: we could also check for sys/ipc.h ...
if $h_msg && $test `./findhdr sys/msg.h`; then
echo "You have the full msg*(2) library." >&4
set d_msg
eval $setvar
-: see if this is a malloc.h system
-set malloc.h i_malloc
-eval $inhdr
-
-: see if stdlib is available
-set stdlib.h i_stdlib
-eval $inhdr
-
-: determine which malloc to compile in
-echo " "
-case "$usemymalloc" in
-''|y*|true) dflt='y' ;;
-n*|false) dflt='n' ;;
-*) dflt="$usemymalloc" ;;
-esac
-rp="Do you wish to attempt to use the malloc that comes with $package?"
-. ./myread
-usemymalloc="$ans"
-case "$ans" in
-y*|true)
- usemymalloc='y'
- mallocsrc='malloc.c'
- mallocobj="malloc$_o"
- d_mymalloc="$define"
- case "$libs" in
- *-lmalloc*)
- : Remove malloc from list of libraries to use
- echo "Removing unneeded -lmalloc from library list" >&4
- set `echo X $libs | $sed -e 's/-lmalloc / /' -e 's/-lmalloc$//'`
- shift
- libs="$*"
- echo "libs = $libs" >&4
- ;;
- esac
- ;;
-*)
- usemymalloc='n'
- mallocsrc=''
- mallocobj=''
- d_mymalloc="$undef"
- ;;
-esac
-
-: compute the return types of malloc and free
-echo " "
-$cat >malloc.c <<END
-#$i_malloc I_MALLOC
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#include <sys/types.h>
-#ifdef I_MALLOC
-#include <malloc.h>
-#endif
-#ifdef I_STDLIB
-#include <stdlib.h>
-#endif
-#ifdef TRY_MALLOC
-void *malloc();
-#endif
-#ifdef TRY_FREE
-void free();
-#endif
-END
-case "$malloctype" in
-'')
- if $cc $ccflags -c -DTRY_MALLOC malloc.c >/dev/null 2>&1; then
- malloctype='void *'
- else
- malloctype='char *'
- fi
- ;;
-esac
-echo "Your system wants malloc to return '$malloctype', it would seem." >&4
-
-case "$freetype" in
-'')
- if $cc $ccflags -c -DTRY_FREE malloc.c >/dev/null 2>&1; then
- freetype='void'
- else
- freetype='int'
- fi
- ;;
-esac
-echo "Your system uses $freetype free(), it would seem." >&4
-$rm -f malloc.[co]
: see if nice exists
set nice d_nice
eval $inlibc
set poll d_poll
eval $inlibc
+: how to create joinable pthreads
+if test "X$usethreads" = "X$define"; then
+ echo " "
+ echo "Checking what constant to use for creating joinable pthreads..." >&4
+ $cat >try.c <<'EOCP'
+#include <pthread.h>
+int main() {
+ int detachstate = JOINABLE;
+}
+EOCP
+ set try -DJOINABLE=PTHREAD_CREATE_JOINABLE
+ if eval $compile; then
+ echo "You seem to use PTHREAD_CREATE_JOINABLE." >&2
+ val="$undef"
+ set d_pthread_create_joinable
+ eval $setvar
+ val=0
+ set pthread_create_joinable
+ eval $setvar
+ else
+ set try -DJOINABLE=PTHREAD_CREATE_UNDETACHED
+ if eval $compile; then
+ echo "You seem to use PTHREAD_CREATE_UNDETACHED." >&2
+ val="$define"
+ set d_pthread_create_joinable
+ eval $setvar
+ val=PTHREAD_CREATE_UNDETACHED
+ set pthread_create_joinable
+ eval $setvar
+ else
+ set try -DJOINABLE=__UNDETACHED
+ if eval $compile; then
+ echo "You seem to use __UNDETACHED." >&2
+ val="$define"
+ set d_pthread_create_joinable
+ eval $setvar
+ val=__UNDETACHED
+ set pthread_create_joinable
+ eval $setvar
+ else
+ echo "Egads, nothing obvious found. Guessing that you use 0." >&2
+ val="$define"
+ set d_pthread_create_joinable
+ eval $setvar
+ val=0
+ set pthread_create_joinable
+ eval $setvar
+ fi
+ fi
+ fi
+ $rm -f try try.*
+else
+ d_pthread_create_joinable="$undef"
+ pthread_create_joinable=0
+fi
+
-: see whether the various POSIXish _yields exist within given cccmd
+: see whether the various POSIXish _yields exist
$cat >try.c <<EOP
#include <pthread.h>
+#include <stdio.h>
main() {
- YIELD();
- exit(0);
+#ifdef SCHED_YIELD
+ sched_yield();
+#else
+#ifdef PTHREAD_YIELD
+ pthread_yield();
+#else
+#ifdef PTHREAD_YIELD_NULL
+ pthread_yield(NULL);
+#endif
+#endif
+#endif
}
EOP
-: see if pthread_yield exists within given cccmd,
-: if we do not usethreads this may well end up undef.
-set try -DYIELD=pthread_yield
+: see if sched_yield exists
+set try -DSCHED_YIELD
if eval $compile; then
val="$define"
- echo 'pthread_yield() found.' >&4
+ sched_yield='sched_yield()'
else
val="$undef"
- echo 'pthread_yield() NOT found.' >&4
fi
-set d_pthread_yield
+case "$usethreads" in
+$define)
+ case "$val" in
+ $define) echo 'sched_yield() found.' >&4 ;;
+ *) echo 'sched_yield() NOT found.' >&4 ;;
+ esac
+esac
+set d_sched_yield
eval $setvar
-: see if sched_yield exists within given cccmd,
-: if we do not usethreads this may well end up undef.
-set try -DYIELD=sched_yield
+: see if pthread_yield exists
+set try -DPTHREAD_YIELD
if eval $compile; then
val="$define"
- echo 'sched_yield() found.' >&4
+ case "$sched_yield" in
+ '') sched_yield='pthread_yield()' ;;
+ esac
else
- val="$undef"
- echo 'sched_yield() NOT found.' >&4
+ set try -DPTHREAD_YIELD_NULL
+ if eval $compile; then
+ val="$define"
+ case "$sched_yield" in
+ '') sched_yield='pthread_yield(NULL)' ;;
+ esac
+ else
+ val="$undef"
+ fi
fi
-set d_sched_yield
+case "$usethreads" in
+$define)
+ case "$val" in
+ $define) echo 'pthread_yield() found.' >&4 ;;
+ *) echo 'pthread_yield() NOT found.' >&4 ;;
+ esac
+ ;;
+esac
+set d_pthread_yield
eval $setvar
-$rm -f try try.*
-: test whether pthreads are created in joinable -- aka undetached -- state
-if test "X$usethreads" = "X$define"; then
- echo $n "Checking whether pthreads are created joinable. $c" >&4
- $cat >try.c <<'EOCP'
-#include <pthread.h>
-#include <stdio.h>
-int main() {
- pthread_attr_t attr;
- int detachstate;
- printf("%s\n",
- pthread_attr_init(&attr) == 0 &&
- pthread_attr_getdetachstate(&attr, &detachstate) == 0 &&
- detachstate == PTHREAD_CREATE_DETACHED ?
- "detached" : "joinable");
- exit(0);
-}
-EOCP
- set try
- if eval $compile; then
- yyy=`./try`
- case "$yyy" in
- detached) echo "Nope, they aren't." >&4 ;;
- *) echo "Yup, they are." >&4 ;;
- esac
- else
- echo " "
- echo "(I can't execute the test program--assuming they are.)" >&4
- yyy=joinable
- fi
- $rm -f try try.*
- case "$yyy" in
- detached) val="$undef" ;;
- *) val="$define" ;;
- esac
- set d_pthreads_created_joinable
- eval $setvar
-else
- d_pthreads_created_joinable="$undef"
-fi
+case "$sched_yield" in
+'') sched_yield=undef ;;
+esac
+
+$rm -f try try.*
: see if this is a pwd.h system
set pwd.h i_pwd
set d_pwcomment
eval $setvar
- if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
+ if $contains 'pw_gecos' $$.h >/dev/null 2>&1; then
+ val="$define"
+ else
+ val="$undef"
+ fi
+ set d_pwgecos
+ eval $setvar
+
+ if $contains 'pw_passwd' $$.h >/dev/null 2>&1; then
val="$define"
else
val="$undef"
fi
- set d_pwgecos
+ set d_pwpasswd
eval $setvar
$rm -f $$.h
set d_pwexpire; eval $setvar
set d_pwcomment; eval $setvar
set d_pwgecos; eval $setvar
+ set d_pwpasswd; eval $setvar
;;
esac
set readlink d_readlink
eval $inlibc
+: see if readv exists
+set readv d_readv
+eval $inlibc
+
: see if rename exists
set rename d_rename
eval $inlibc
case "$d_semctl$d_semget$d_semop" in
*"$undef"*) h_sem=false;;
esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID messages"*"not configured"*)
+ echo "Your $osname does not have the sem*(2) configured." >&4
+ h_sem=false
+ val="$undef"
+ set semctl d_semctl
+ eval $setvar
+ set semget d_semget
+ eval $setvar
+ set semop d_semop
+ eval $setvar
+ ;;
+ esac
+ ;;
+esac
: we could also check for sys/ipc.h ...
if $h_sem && $test `./findhdr sys/sem.h`; then
echo "You have the full sem*(2) library." >&4
echo "You do not have union semun in <sys/sem.h>." >&4
val="$undef"
fi
-$rm -f try try.c
+$rm -f try try.c try.h
set d_union_semun
eval $setvar
$define)
: see whether semctl IPC_STAT can use union semun
echo " "
+ $cat > try.h <<END
+#ifndef S_IRUSR
+# ifdef S_IREAD
+# define S_IRUSR S_IREAD
+# define S_IWUSR S_IWRITE
+# define S_IXUSR S_IEXEC
+# else
+# define S_IRUSR 0400
+# define S_IWUSR 0200
+# define S_IXUSR 0100
+# endif
+# define S_IRGRP (S_IRUSR>>3)
+# define S_IWGRP (S_IWUSR>>3)
+# define S_IXGRP (S_IXUSR>>3)
+# define S_IROTH (S_IRUSR>>6)
+# define S_IWOTH (S_IWUSR>>6)
+# define S_IXOTH (S_IXUSR>>6)
+#endif
+#ifndef S_IRWXU
+# define S_IRWXU (S_IRUSR|S_IWUSR|S_IXUSR)
+# define S_IRWXG (S_IRGRP|S_IWGRP|S_IXGRP)
+# define S_IRWXO (S_IROTH|S_IWOTH|S_IXOTH)
+#endif
+END
+
$cat > try.c <<END
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/stat.h>
#include <stdio.h>
#include <errno.h>
+#include "try.h"
#ifndef errno
extern int errno;
#endif
#include <sys/ipc.h>
#include <sys/sem.h>
#include <sys/stat.h>
+#include "try.h"
#include <stdio.h>
#include <errno.h>
#ifndef errno
eval $setvar
case "$d_semctl_semid_ds" in
$define)
- echo "You can $also use struct semid_ds * for semctl IPC_STAT." >&4
+ echo "You can $also use struct semid_ds* for semctl IPC_STAT." >&4
;;
- *) echo "You cannot use struct semid_ds * for semctl IPC_STAT." >&4
+ *) echo "You cannot use struct semid_ds* for semctl IPC_STAT." >&4
;;
esac
+ $rm -f try.h
;;
*) val="$undef"
set seteuid d_seteuid
eval $inlibc
+: see if setgrent exists
+set setgrent d_setgrent
+eval $inlibc
+
: see if sethostent exists
set sethostent d_sethent
eval $inlibc
set setpriority d_setprior
eval $inlibc
+: see if setpwent exists
+set setpwent d_setpwent
+eval $inlibc
+
: see if setregid exists
set setregid d_setregid
eval $inlibc
case "$d_shmctl$d_shmget$d_shmat$d_shmdt" in
*"$undef"*) h_shm=false;;
esac
+case "$osname" in
+freebsd)
+ case "`ipcs 2>&1`" in
+ "SVID shared memory"*"not configured"*)
+ echo "Your $osname does not have the shm*(2) configured." >&4
+ h_shm=false
+ val="$undef"
+ set shmctl d_shmctl
+ evat $setvar
+ set shmget d_shmget
+ evat $setvar
+ set shmat d_shmat
+ evat $setvar
+ set shmdt d_shmdt
+ evat $setvar
+ ;;
+ esac
+ ;;
+esac
: we could also check for sys/ipc.h ...
if $h_shm && $test `./findhdr sys/shm.h`; then
echo "You have the full shm*(2) library." >&4
eval $setvar
$rm -f try.c try
-socketlib=''
-sockethdr=''
-: see whether socket exists
-echo " "
-$echo $n "Hmm... $c" >&4
-if set socket val -f d_socket; eval $csym; $val; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- if set setsockopt val -f; eval $csym; $val; then
- d_oldsock="$undef"
- else
- echo "...but it uses the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
-else
- if $contains socklib libc.list >/dev/null 2>&1; then
- echo "Looks like you have Berkeley networking support." >&4
- d_socket="$define"
- : we will have to assume that it supports the 4.2 BSD interface
- d_oldsock="$undef"
- else
- echo "You don't have Berkeley networking in libc$_a..." >&4
- if test -f /usr/lib/libnet$_a; then
- ( ($nm $nm_opt /usr/lib/libnet$_a | eval $nm_extract) || \
- $ar t /usr/lib/libnet$_a) 2>/dev/null >> libc.list
- if $contains socket libc.list >/dev/null 2>&1; then
- echo "...but the Wollongong group seems to have hacked it in." >&4
- socketlib="-lnet"
- sockethdr="-I/usr/netinclude"
- d_socket="$define"
- if $contains setsockopt libc.list >/dev/null 2>&1; then
- d_oldsock="$undef"
- else
- echo "...using the old 4.1c interface, rather than 4.2" >&4
- d_oldsock="$define"
- fi
- else
- echo "or even in libnet$_a, which is peculiar." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- else
- echo "or anywhere else I see." >&4
- d_socket="$undef"
- d_oldsock="$undef"
- fi
- fi
-fi
-
-: see if socketpair exists
-set socketpair d_sockpair
-eval $inlibc
-
: see if stat knows about block sizes
echo " "
-xxx=`./findhdr sys/stat.h`
-if $contains 'st_blocks;' "$xxx" >/dev/null 2>&1 ; then
- if $contains 'st_blksize;' "$xxx" >/dev/null 2>&1 ; then
- echo "Your stat() knows about block sizes." >&4
- val="$define"
- else
- echo "Your stat() doesn't know about block sizes." >&4
- val="$undef"
- fi
-else
- echo "Your stat() doesn't know about block sizes." >&4
- val="$undef"
-fi
-set d_statblks
-eval $setvar
+set d_statblks stat st_blocks $i_sysstat sys/stat.h
+eval $hasfield
: see if _ptr and _cnt from stdio act std
echo " "
: see if strerror and/or sys_errlist[] exist
echo " "
-if set strerror val -f d_strerror; eval $csym; $val; then
- echo 'strerror() found.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(You also have sys_errlist[], so we could roll our own strerror.)"
- d_syserrlst="$define"
- else
- echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
- d_syserrlst="$undef"
- fi
-elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
- $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
- echo 'strerror() found in string header.' >&4
- d_strerror="$define"
- d_strerrm='strerror(e)'
- if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
- echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
+if test "X$d_strerror" = X -o "X$d_syserrlst" = X; then
+ if set strerror val -f d_strerror; eval $csym; $val; then
+ echo 'strerror() found.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(You also have sys_errlist[], so we could roll our own strerror.)"
+ d_syserrlst="$define"
+ else
+ echo "(Since you don't have sys_errlist[], sterror() is welcome.)"
+ d_syserrlst="$undef"
+ fi
+ elif xxx=`./findhdr string.h`; test "$xxx" || xxx=`./findhdr strings.h`; \
+ $contains '#[ ]*define.*strerror' "$xxx" >/dev/null 2>&1; then
+ echo 'strerror() found in string header.' >&4
+ d_strerror="$define"
+ d_strerrm='strerror(e)'
+ if set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "(Most probably, strerror() uses sys_errlist[] for descriptions.)"
+ d_syserrlst="$define"
+ else
+ echo "(You don't appear to have any sys_errlist[], how can this be?)"
+ d_syserrlst="$undef"
+ fi
+ elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
+ echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
+ d_strerror="$undef"
d_syserrlst="$define"
- else
- echo "(You don't appear to have any sys_errlist[], how can this be?)"
+ d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
+ else
+ echo 'strerror() and sys_errlist[] NOT found.' >&4
+ d_strerror="$undef"
d_syserrlst="$undef"
- fi
-elif set sys_errlist val -a d_syserrlst; eval $csym; $val; then
-echo "strerror() not found, but you have sys_errlist[] so we'll use that." >&4
- d_strerror="$undef"
- d_syserrlst="$define"
- d_strerrm='((e)<0||(e)>=sys_nerr?"unknown":sys_errlist[e])'
-else
- echo 'strerror() and sys_errlist[] NOT found.' >&4
- d_strerror="$undef"
- d_syserrlst="$undef"
- d_strerrm='"unknown"'
+ d_strerrm='"unknown"'
+ fi
fi
: see if strtod exists
set umask d_umask
eval $inlibc
-: see how we will look up host name
-echo " "
-if false; then
- : dummy stub to allow use of elif
-elif set uname val -f d_uname; eval $csym; $val; then
- if ./xenix; then
- $cat <<'EOM'
-uname() was found, but you're running xenix, and older versions of xenix
-have a broken uname(). If you don't really know whether your xenix is old
-enough to have a broken system call, use the default answer.
-
-EOM
- dflt=y
- case "$d_uname" in
- "$define") dflt=n;;
- esac
- rp='Is your uname() broken?'
- . ./myread
- case "$ans" in
- n*) d_uname="$define"; call=uname;;
- esac
- else
- echo 'uname() found.' >&4
- d_uname="$define"
- call=uname
- fi
-fi
-case "$d_gethname" in
-'') d_gethname="$undef";;
-esac
-case "$d_uname" in
-'') d_uname="$undef";;
-esac
-case "$d_phostname" in
-'') d_phostname="$undef";;
-esac
-
: backward compatibility for d_hvfork
if test X$d_hvfork != X; then
d_vfork="$d_hvfork"
set sys/ndir.h i_sysndir
eval $inhdr
+: see if sys/types.h has to be included
+set sys/types.h i_systypes
+eval $inhdr
+
: see if closedir exists
set closedir d_closedir
eval $inlibc
#$i_dirent I_DIRENT /**/
#$i_sysdir I_SYS_DIR /**/
#$i_sysndir I_SYS_NDIR /**/
+#$i_systypes I_SYS_TYPES /**/
+#if defined(I_SYS_TYPES)
+#include <sys/types.h>
+#endif
#if defined(I_DIRENT)
#include <dirent.h>
#if defined(NeXT) && defined(I_SYS_DIR) /* NeXT needs dirent + sys/dir.h */
set wctomb d_wctomb
eval $inlibc
+: see if writev exists
+set writev d_writev
+eval $inlibc
+
: preserve RCS keywords in files with variable substitution, grrr
Date='$Date'
Id='$Id'
: check for void type
echo " "
echo "Checking to see how well your C compiler groks the void type..." >&4
-echo " "
-$cat >&4 <<EOM
- Support flag bits are:
- 1: basic void declarations.
- 2: arrays of pointers to functions returning void.
- 4: operations between pointers to and addresses of void functions.
- 8: generic void pointers.
-EOM
-echo " "
case "$voidflags" in
'')
$cat >try.c <<'EOCP'
EOCP
if $cc $ccflags -c -DTRY=$defvoidused try.c >.out 2>&1 ; then
voidflags=$defvoidused
- echo "It appears to support void to the level $package wants ($defvoidused)."
+ echo "Good. It appears to support void to the level $package wants.">&4
if $contains warning .out >/dev/null 2>&1; then
echo "However, you might get some warnings that look like this:"
$cat .out
esac
case "$voidflags" in
"$defvoidused") ;;
-*)
+*) $cat >&4 <<'EOM'
+ Support flag bits are:
+ 1: basic void declarations.
+ 2: arrays of pointers to functions returning void.
+ 4: operations between pointers to and addresses of void functions.
+ 8: generic void pointers.
+EOM
dflt="$voidflags";
rp="Your void support flags add up to what?"
. ./myread
esac
$rm -f try.* .out
-: check for length of double
+
+: How can we generate normalized random numbers ?
echo " "
-case "$doublesize" in
+echo "Looking for a random number function..." >&4
+case "$randfunc" in
'')
- $echo $n "Checking to see how big your double precision numbers are...$c" >&4
- $cat >try.c <<'EOCP'
+ if set drand48 val -f; eval $csym; $val; then
+ dflt="drand48"
+ echo "Good, found drand48()." >&4
+ elif set random val -f; eval $csym; $val; then
+ dflt="random"
+ echo "OK, found random()." >&4
+ else
+ dflt="rand"
+ echo "Yick, looks like I have to use rand()." >&4
+ fi
+ echo " "
+ ;;
+*)
+ dflt="$randfunc"
+ ;;
+esac
+cont=true
+
+case "$ccflags" in
+*-Dmy_rand=*|*-Dmy_srand=*)
+ echo "Removing obsolete -Dmy_rand, -Dmy_srand, and -Drandbits from ccflags." >&4
+ ccflags="`echo $ccflags | sed -e 's/-Dmy_rand=random/ /'`"
+ ccflags="`echo $ccflags | sed -e 's/-Dmy_srand=srandom/ /'`"
+ ccflags="`echo $ccflags | sed -e 's/-Drandbits=[0-9][0-9]*/ /'`"
+ ;;
+esac
+
+while $test "$cont"; do
+ rp="Use which function to generate random numbers?"
+ . ./myread
+ if $test "$ans" = "$dflt"; then
+ : null
+ else
+ randbits=''
+ fi
+ randfunc="$ans"
+ if set $ans val -f; eval $csym; $val; then
+ cont=''
+ else
+ dflt=y
+ rp="I cannot find function $ans. Use that name anyway?"
+ . ./myread
+ dflt=rand
+ case "$ans" in
+ [yY]*) cont='';;
+ esac
+ fi
+ case "$cont" in
+ '')
+ case "$randfunc" in
+ drand48)
+ drand01="drand48()"
+ seedfunc="srand48"
+ randbits=48
+ randseedtype=long
+ ;;
+ rand|random)
+ case "$randbits" in
+ '')
+echo "Checking to see how many bits your $randfunc() function produces..." >&4
+ $cat >try.c <<EOCP
+#$i_unistd I_UNISTD
+#$i_stdlib I_STDLIB
#include <stdio.h>
+#ifdef I_UNISTD
+# include <unistd.h>
+#endif
+#ifdef I_STDLIB
+# include <stdlib.h>
+#endif
main()
{
- printf("%d\n", sizeof(double));
+ register int i;
+ register unsigned long tmp;
+ register unsigned long max = 0L;
+
+ for (i = 1000; i; i--) {
+ tmp = (unsigned long) $randfunc();
+ if (tmp > max) max = tmp;
+ }
+ for (i = 0; max; i++)
+ max /= 2;
+ printf("%d\n",i);
}
EOCP
- set try
- if eval $compile_ok; then
- doublesize=`./try`
- $echo " $doublesize bytes." >&4
+ set try
+ if eval $compile_ok; then
+ dflt=`try`
+ else
+ dflt='?'
+ echo "(I can't seem to compile the test program...)"
+ fi
+ ;;
+ *)
+ dflt="$randbits"
+ ;;
+ esac
+ rp="How many bits does your $randfunc() function produce?"
+ . ./myread
+ randbits="$ans"
+ $rm -f try.c try
+ drand01="($randfunc() / (double) ((unsigned long)1 << $randbits))"
+ seedfunc="s$randfunc"
+ randseedtype=unsigned
+ ;;
+ *)
+ dflt="31"
+ rp="How many bits does your $randfunc() function produce?"
+ . ./myread
+ randbits="$ans"
+ seedfunc="s$randfunc"
+ drand01="($randfunc() / (double) ((unsigned long)1 << $randbits))"
+ if set $seedfunc val -f; eval $csym; $val; then
+ echo "(Using $seedfunc() to seed random generator)"
+ else
+ echo "(Warning: no $seedfunc() to seed random generator)"
+ seedfunc=rand
+ fi
+ randseedtype=unsigned
+ ;;
+ esac
+ ;;
+ esac
+done
+
+echo " "
+echo "Determining whether or not we are on an EBCDIC system..." >&4
+$cat >tebcdic.c <<'EOM'
+int main()
+{
+ if ('M'==0xd4) return 0;
+ return 1;
+}
+EOM
+
+val=$undef
+set tebcdic
+if eval $compile_ok; then
+ if ./tebcdic; then
+ echo "You have EBCDIC." >&4
+ val="$define"
else
- dflt='8'
- echo "(I can't seem to compile the test program. Guessing...)"
- rp="What is the size of a double precision number (in bytes)?"
- . ./myread
- doublesize="$ans"
+ echo "Nope, no EBCDIC. Assuming ASCII or some ISO Latin." >&4
fi
- ;;
-esac
-$rm -f try.c try
+else
+ echo "I'm unable to compile the test program." >&4
+ echo "I'll assume ASCII or some ISO Latin." >&4
+fi
+$rm -f tebcdic.c tebcdic
+set ebcdic
+eval $setvar
: see what type file positions are declared as in the library
rp="What is the type for file position used by fsetpos()?"
set fpos_t fpostype long stdio.h sys/types.h
eval $typedef_ask
-: get csh whereabouts
-case "$csh" in
-'csh') val="$undef" ;;
-*) val="$define" ;;
-esac
-set d_csh
-eval $setvar
-: Respect a hint or command line value for full_csh.
-case "$full_csh" in
-'') full_csh=$csh ;;
-esac
-
: Store the full pathname to the sed program for use in the C program
full_sed=$sed
*) groupstype="$gidtype";;
esac
-: see what type is used for devices
-rp="What is the type used for device numbers on this system?"
-set dev_t devtype long stdio.h sys/types.h
-eval $typedef_ask
-
: see what type lseek is declared as in the kernel
rp="What is the type used for lseek's offset on this system?"
set off_t lseektype long stdio.h sys/types.h
eval $typedef_ask
echo " "
+$echo $n "Checking to see how big your file offsets are...$c" >&4
+$cat >try.c <<EOCP
+#include <sys/types.h>
+#include <stdio.h>
+main()
+{
+ printf("%d\n", sizeof($lseektype));
+}
+EOCP
+set try
+if eval $compile_ok; then
+ lseeksize=`./try`
+ $echo " $lseeksize bytes." >&4
+else
+ dflt='4'
+ echo " "
+ echo "(I can't seem to compile the test program. Guessing...)"
+ rp="What is the size of your file offsets (in bytes)?"
+ . ./myread
+ lseeksize="$ans"
+fi
+$rm -f try.c try
+
+echo " "
echo "Checking if your $make program sets \$(MAKE)..." >&4
case "$make_set_make" in
'')
esac
$rm -f try.c try
-: check for size of random number generator
-echo " "
-case "$randbits" in
-'')
- echo "Checking to see how many bits your rand function produces..." >&4
- $cat >try.c <<EOCP
-#$i_unistd I_UNISTD
-#$i_stdlib I_STDLIB
-#include <stdio.h>
-#ifdef I_UNISTD
-# include <unistd.h>
-#endif
-#ifdef I_STDLIB
-# include <stdlib.h>
-#endif
-EOCP
- $cat >>try.c <<'EOCP'
-main()
-{
- register int i;
- register unsigned long tmp;
- register unsigned long max = 0L;
-
- for (i = 1000; i; i--) {
- tmp = (unsigned long)rand();
- if (tmp > max) max = tmp;
- }
- for (i = 0; max; i++)
- max /= 2;
- printf("%d\n",i);
-}
-EOCP
- set try
- if eval $compile_ok; then
- dflt=`./try$_exe`
- else
- dflt='?'
- echo "(I can't seem to compile the test program...)"
- fi
- ;;
-*)
- dflt="$randbits"
- ;;
-esac
-rp='How many bits does your rand() function produce?'
-. ./myread
-randbits="$ans"
-$rm -f try.* try
-
: see if ar generates random libraries by itself
echo " "
echo "Checking how to generate random libraries on your machine..." >&4
fi
$rm -f foo* bar*
-: see if sys/select.h has to be included
-set sys/select.h i_sysselct
-eval $inhdr
-
-: see if we should include time.h, sys/time.h, or both
-echo " "
-echo "Testing to see if we should include <time.h>, <sys/time.h> or both." >&4
-$echo $n "I'm now running the test program...$c"
-$cat >try.c <<'EOCP'
-#include <sys/types.h>
-#ifdef I_TIME
-#include <time.h>
-#endif
-#ifdef I_SYSTIME
-#ifdef SYSTIMEKERNEL
-#define KERNEL
-#endif
-#include <sys/time.h>
-#endif
-#ifdef I_SYSSELECT
-#include <sys/select.h>
-#endif
-main()
-{
- struct tm foo;
-#ifdef S_TIMEVAL
- struct timeval bar;
-#endif
-#ifdef S_TIMEZONE
- struct timezone tzp;
-#endif
- if (foo.tm_sec == foo.tm_sec)
- exit(0);
-#ifdef S_TIMEVAL
- if (bar.tv_sec == bar.tv_sec)
- exit(0);
-#endif
- exit(1);
-}
-EOCP
-flags=''
-for s_timezone in '-DS_TIMEZONE' ''; do
-sysselect=''
-for s_timeval in '-DS_TIMEVAL' ''; do
-for i_systimek in '' '-DSYSTIMEKERNEL'; do
-for i_time in '' '-DI_TIME'; do
-for i_systime in '-DI_SYSTIME' ''; do
- case "$flags" in
- '') $echo $n ".$c"
- set try $i_time $i_systime $i_systimek $sysselect $s_timeval $s_timezone
- if eval $compile; then
- set X $i_time $i_systime $i_systimek $sysselect $s_timeval
- shift
- flags="$*"
- echo " "
- $echo $n "Succeeded with $flags$c"
- fi
- ;;
- esac
-done
-done
-done
-done
-done
-timeincl=''
-echo " "
-case "$flags" in
-*SYSTIMEKERNEL*) i_systimek="$define"
- timeincl=`./findhdr sys/time.h`
- echo "We'll include <sys/time.h> with KERNEL defined." >&4;;
-*) i_systimek="$undef";;
-esac
-case "$flags" in
-*I_TIME*) i_time="$define"
- timeincl=`./findhdr time.h`" $timeincl"
- echo "We'll include <time.h>." >&4;;
-*) i_time="$undef";;
-esac
-case "$flags" in
-*I_SYSTIME*) i_systime="$define"
- timeincl=`./findhdr sys/time.h`" $timeincl"
- echo "We'll include <sys/time.h>." >&4;;
-*) i_systime="$undef";;
-esac
-$rm -f try.c try
-
-: check for fd_set items
-$cat <<EOM
-
-Checking to see how well your C compiler handles fd_set and friends ...
-EOM
-$cat >fd_set.c <<EOCP
-#$i_systime I_SYS_TIME
-#$i_sysselct I_SYS_SELECT
-#$d_socket HAS_SOCKET
-#include <sys/types.h>
-#ifdef HAS_SOCKET
-#include <sys/socket.h> /* Might include <sys/bsdtypes.h> */
-#endif
-#ifdef I_SYS_TIME
-#include <sys/time.h>
-#endif
-#ifdef I_SYS_SELECT
-#include <sys/select.h>
-#endif
-main() {
- fd_set fds;
-
-#ifdef TRYBITS
- if(fds.fds_bits);
-#endif
-
-#if defined(FD_SET) && defined(FD_CLR) && defined(FD_ISSET) && defined(FD_ZERO)
- exit(0);
-#else
- exit(1);
-#endif
-}
-EOCP
-set fd_set -DTRYBITS
-if eval $compile; then
- d_fds_bits="$define"
- d_fd_set="$define"
- echo "Well, your system knows about the normal fd_set typedef..." >&4
- if ./fd_set; then
- echo "and you have the normal fd_set macros (just as I'd expect)." >&4
- d_fd_macros="$define"
- else
- $cat >&4 <<'EOM'
-but not the normal fd_set macros! Gaaack! I'll have to cover for you.
-EOM
- d_fd_macros="$undef"
- fi
-else
- $cat <<'EOM'
-Hmm, your compiler has some difficulty with fd_set. Checking further...
-EOM
- set fd_set
- if eval $compile; then
- d_fds_bits="$undef"
- d_fd_set="$define"
- echo "Well, your system has some sort of fd_set available..." >&4
- if ./fd_set; then
- echo "and you have the normal fd_set macros." >&4
- d_fd_macros="$define"
- else
- $cat <<'EOM'
-but not the normal fd_set macros! Gross! More work for me...
-EOM
- d_fd_macros="$undef"
- fi
- else
- echo "Well, you got zip. That's OK, I can roll my own fd_set stuff." >&4
- d_fd_set="$undef"
- d_fds_bits="$undef"
- d_fd_macros="$undef"
- fi
-fi
-$rm -f fd_set*
-
: check for type of arguments to select.
case "$selecttype" in
'') case "$d_select" in
: The first arg can be int, unsigned, or size_t
: The last arg may or may not be 'const'
val=''
+ : void pointer has been seen but using that
+ : breaks the selectminbits test
for xxx in 'fd_set *' 'int *'; do
- for nfd in 'int' 'size_t' 'unsigned' ; do
+ for nfd in 'int' 'size_t' 'unsigned long' 'unsigned' ; do
for tmo in 'struct timeval *' 'const struct timeval *'; do
case "$val" in
'') try="extern select _(($nfd, $xxx, $xxx, $xxx, $tmo));"
;;
esac
+: check for the select 'width'
+case "$selectminbits" in
+'') case "$d_select" in
+ $define)
+ $cat <<EOM
+
+Checking to see on how many bits at a time your select() operates...
+EOM
+ $cat >try.c <<EOCP
+#include <sys/types.h>
+#$i_time I_TIME
+#$i_systime I_SYS_TIME
+#$i_systimek I_SYS_TIME_KERNEL
+#ifdef I_TIME
+# include <time.h>
+#endif
+#ifdef I_SYS_TIME
+# ifdef I_SYS_TIME_KERNEL
+# define KERNEL
+# endif
+# include <sys/time.h>
+# ifdef I_SYS_TIME_KERNEL
+# undef KERNEL
+# endif
+#endif
+#$i_sysselct I_SYS_SELECT
+#ifdef I_SYS_SELECT
+#include <sys/select.h>
+#endif
+#include <stdio.h>
+$selecttype b;
+#define S sizeof(*(b))
+#define MINBITS 64
+#define NBYTES (S * 8 > MINBITS ? S : MINBITS/8)
+#define NBITS (NBYTES * 8)
+int main() {
+ char s[NBYTES];
+ struct timeval t;
+ int i;
+ FILE* fp;
+ int fd;
+
+ fclose(stdin);
+ fp = fopen("try.c", "r");
+ if (fp == 0)
+ exit(1);
+ fd = fileno(fp);
+ if (fd < 0)
+ exit(2);
+ b = ($selecttype)s;
+ for (i = 0; i < NBITS; i++)
+ FD_SET(i, b);
+ t.tv_sec = 0;
+ t.tv_usec = 0;
+ select(fd + 1, b, 0, 0, &t);
+ for (i = NBITS - 1; i > fd && FD_ISSET(i, b); i--);
+ printf("%d\n", i + 1);
+ return 0;
+}
+EOCP
+ set try
+ if eval $compile_ok; then
+ selectminbits=`./try`
+ case "$selectminbits" in
+ '') cat >&4 <<EOM
+Cannot figure out on how many bits at a time your select() operates.
+I'll play safe and guess it is 32 bits.
+EOM
+ selectminbits=32
+ bits="32 bits"
+ ;;
+ 1) bits="1 bit" ;;
+ *) bits="$selectminbits bits" ;;
+ esac
+ echo "Your select() operates on $bits at a time." >&4
+ else
+ rp='What is the minimum number of bits your select() operates on?'
+ case "$byteorder" in
+ 1234|12345678) dflt=32 ;;
+ *) dflt=1 ;;
+ esac
+ . ./myread
+ val=$ans
+ selectminbits="$val"
+ fi
+ $rm -f try.* try
+ ;;
+ *) : no select, so pick a harmless default
+ selectminbits='32'
+ ;;
+ esac
+ ;;
+esac
+
: Trace out the files included by signal.h, then look for SIGxxx names.
: Remove SIGARRAYSIZE used by HPUX.
: Remove SIGTYP void lines used by OS2.
EOCP
-echo $xxx | $tr ' ' '\012' | $sort | $uniq | $awk '
+echo $xxx | $tr ' ' $trnl | $sort | $uniq | $awk '
{
printf "#ifdef SIG"; printf $1; printf "\n"
printf "printf(\""; printf $1; printf " %%d\\n\",SIG";
echo 'NSIG 50' > signal.nsg
fi
: Now look at all the signal names, one at a time.
- for xx in `echo $xxx | $tr ' ' '\012' | $sort | $uniq`; do
+ for xx in `echo $xxx | $tr ' ' $trnl | $sort | $uniq`; do
$cat > signal.c <<EOCP
#include <sys/types.h>
#include <signal.h>
case $# in
0) set HUP INT QUIT ILL TRAP ABRT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM;;
esac
- echo $@ | $tr ' ' '\012' | \
+ echo $@ | $tr ' ' $trnl | \
$awk '{ printf $1; printf " %d\n", ++s; }' >signal.lst
fi
$rm -f signal.c signal$_exe signal$_o signal.nsg signal.ls1
: generate list of signal names
echo " "
case "$sig_name_init" in
-'')
+'') doinit=yes ;;
+*) case "$sig_num_init" in
+ ''|*,*) doinit=yes ;;
+ esac ;;
+esac
+case "$doinit" in
+yes)
echo "Generating a list of signal names and numbers..." >&4
. ./signal_cmd
sig_name=`$awk '{printf "%s ", $1}' signal.lst`
sig_name_init=`$awk 'BEGIN { printf "\"ZERO\", " }
{ printf "\"%s\", ", $1 }
END { printf "0\n" }' signal.lst`
- sig_num=`$awk 'BEGIN { printf "0, " }
+ sig_num=`$awk '{printf "%d ", $2}' signal.lst`
+ sig_num="0 $sig_num"
+ sig_num_init=`$awk 'BEGIN { printf "0, " }
{ printf "%d, ", $2}
END { printf "0\n"}' signal.lst`
;;
: see if time exists
echo " "
-if set time val -f d_time; eval $csym; $val; then
- echo 'time() found.' >&4
- val="$define"
- rp="What is the type returned by time() on this system?"
- set time_t timetype long stdio.h sys/types.h
- eval $typedef_ask
-else
- echo 'time() not found, hope that will do.' >&4
- val="$undef"
- timetype='int';
+if test "X$d_time" = X -o X"$timetype" = X; then
+ if set time val -f d_time; eval $csym; $val; then
+ echo 'time() found.' >&4
+ val="$define"
+ rp="What is the type returned by time() on this system?"
+ set time_t timetype long stdio.h sys/types.h
+ eval $typedef_ask
+ else
+ echo 'time() not found, hope that will do.' >&4
+ val="$undef"
+ timetype='int';
+ fi
+ set d_time
+ eval $setvar
fi
-set d_time
-eval $setvar
: see what type uids are declared as in the kernel
echo " "
set i_fcntl
eval $setvar
-: see if this is an grp system
-set grp.h i_grp
-eval $inhdr
-
: see if locale.h is available
set locale.h i_locale
eval $inhdr
+: see if mach cthreads are available
+if test "X$usethreads" = "X$define"; then
+ set mach/cthreads.h i_machcthr
+ eval $inhdr
+else
+ i_machcthr="$undef"
+fi
+
+
+
: see if this is a math.h system
set math.h i_math
eval $inhdr
set i_neterrno
eval $setvar
+: see if this is a poll.h system
+set poll.h i_poll
+eval $inhdr
+
: get C preprocessor symbols handy
echo " "
$echo $n "Hmm... $c"
-echo $al | $tr ' ' '\012' >Cppsym.know
+echo $al | $tr ' ' $trnl >Cppsym.know
$cat <<EOSS >Cppsym
$startsh
case "\$1" in
case \$# in
0) exit 1;;
esac
-echo \$* | $tr ' ' '\012' | $sed -e 's/\(.*\)/\\
+echo \$* | $tr ' ' '$trnl' | $sed -e 's/\(.*\)/\\
#ifdef \1\\
exit 0; _ _ _ _\1\\ \1\\
#endif\\
EOS
chmod +x ccsym
$eunicefix ccsym
-./ccsym | $sort | $uniq >ccsym.raw
+./ccsym > ccsym1.raw
+if $test -s ccsym1.raw; then
+ $sort ccsym1.raw | $uniq >ccsym.raw
+else
+ mv ccsym1.raw ccsym.raw
+fi
+
$awk '/\=/ { print $0; next }
{ print $0"=1" }' ccsym.raw >ccsym.list
$awk '{ print $0"=1" }' Cppsym.true >ccsym.true
set stddef.h i_stddef
eval $inhdr
+: see if sys/access.h is available
+set sys/access.h i_sysaccess
+eval $inhdr
+
: see if ioctl defs are in sgtty, termio, sys/filio or sys/ioctl
set sys/filio.h i_sysfilio
eval $inhdr
set sys/resource.h i_sysresrc
eval $inhdr
-: see if sys/stat.h is available
-set sys/stat.h i_sysstat
-eval $inhdr
-
-: see if sys/types.h has to be included
-set sys/types.h i_systypes
+: see if sys/security.h is available
+set sys/security.h i_syssecrt
eval $inhdr
: see if this is a sys/un.h system
: to be built.
for xxx in * ; do
case "$xxx" in
- DynaLoader) ;;
+ DynaLoader|dynaload) ;;
*) if $test -f $xxx/$xxx.xs; then
known_extensions="$known_extensions $xxx"
+ elif $test -f $xxx/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $xxx"
else
if $test -d $xxx; then
+ # Look for nested extensions, eg. Devel/Dprof.
cd $xxx
- zzz=$known_extensions
for yyy in * ; do
if $test -f $yyy/$yyy.xs; then
known_extensions="$known_extensions $xxx/$yyy"
+ elif $test -f $yyy/Makefile.PL; then
+ nonxs_extensions="$nonxs_extensions $xxx/$yyy"
fi
done
cd ..
- if $test "$zzz" = "$known_extensions"; then
- if $test -f $xxx/Makefile.PL; then
- known_extensions="$known_extensions $xxx"
- nonxs_extensions="$nonxs_extensions $xxx"
- fi
- fi
fi
fi
;;
true|$define|y) avail_ext="$avail_ext $xxx" ;;
esac
;;
- *)
- case " $nonxs_extensions " in
- *" $xxx "*) ;;
- *) avail_ext="$avail_ext $xxx" ;;
+ IPC/SysV|ipc/sysv)
+ : XXX Do we need a useipcsysv variable here
+ case "${d_msg}${d_sem}${d_shm}" in
+ *"${define}"*) avail_ext="$avail_ext $xxx" ;;
esac
;;
+ *) avail_ext="$avail_ext $xxx"
+ ;;
esac
done
avail_ext="$*"
: Now see which nonxs extensions are supported on this system.
+: For now assume all are.
nonxs_ext=''
for xxx in $nonxs_extensions ; do
case "$xxx" in
esac
;;
esac
- : Exclude those that are not xs extensions
case "$dflt" in
'') dflt=none;;
esac
: Exclude those already listed in dynamic linking
dflt=''
for xxx in $avail_ext; do
- case " $dynamic_ext $nonxs_ext " in
+ case " $dynamic_ext " in
*" $xxx "*) ;;
*) dflt="$dflt $xxx" ;;
esac
esac
;;
esac
+ : Exclude those that are not xs extensions
case "$dflt" in
'') dflt=none;;
esac
;;
esac
-set X $dynamic_ext $static_ext
+set X $dynamic_ext $static_ext $nonxs_ext
shift
extensions="$*"
alignbytes='$alignbytes'
ansi2knr='$ansi2knr'
aphostname='$aphostname'
+apiversion='$apiversion'
ar='$ar'
archlib='$archlib'
archlibexp='$archlibexp'
+archname64='$archname64'
archname='$archname'
archobjs='$archobjs'
awk='$awk'
csh='$csh'
d_Gconvert='$d_Gconvert'
d_access='$d_access'
+d_accessx='$d_accessx'
d_alarm='$d_alarm'
d_archlib='$d_archlib'
d_attribut='$d_attribut'
d_chroot='$d_chroot'
d_chsize='$d_chsize'
d_closedir='$d_closedir'
+d_cmsghdr_s='$d_cmsghdr_s'
d_const='$d_const'
d_crypt='$d_crypt'
d_csh='$d_csh'
d_cuserid='$d_cuserid'
d_dbl_dig='$d_dbl_dig'
+d_dbmclose64='$d_dbmclose64'
+d_dbminit64='$d_dbminit64'
+d_delete64='$d_delete64'
d_difftime='$d_difftime'
+d_dirent64_s='$d_dirent64_s'
d_dirnamlen='$d_dirnamlen'
d_dlerror='$d_dlerror'
d_dlopen='$d_dlopen'
d_dlsymun='$d_dlsymun'
d_dosuid='$d_dosuid'
+d_drand48proto='$d_drand48proto'
d_dup2='$d_dup2'
+d_eaccess='$d_eaccess'
+d_endgrent='$d_endgrent'
d_endhent='$d_endhent'
d_endnent='$d_endnent'
d_endpent='$d_endpent'
+d_endpwent='$d_endpwent'
d_endsent='$d_endsent'
d_eofnblk='$d_eofnblk'
d_eunice='$d_eunice'
d_fd_macros='$d_fd_macros'
d_fd_set='$d_fd_set'
d_fds_bits='$d_fds_bits'
+d_fetch64='$d_fetch64'
+d_fgetpos64='$d_fgetpos64'
d_fgetpos='$d_fgetpos'
+d_firstkey64='$d_firstkey64'
d_flexfnam='$d_flexfnam'
+d_flock64_s='$d_flock64_s'
d_flock='$d_flock'
+d_fopen64='$d_fopen64'
d_fork='$d_fork'
d_fpathconf='$d_fpathconf'
+d_freopen64='$d_freopen64'
+d_fseek64='$d_fseek64'
+d_fseeko64='$d_fseeko64'
+d_fseeko='$d_fseeko'
+d_fsetpos64='$d_fsetpos64'
d_fsetpos='$d_fsetpos'
+d_fstat64='$d_fstat64'
+d_ftell64='$d_ftell64'
+d_ftello64='$d_ftello64'
+d_ftello='$d_ftello'
d_ftime='$d_ftime'
+d_ftruncate64='$d_ftruncate64'
+d_getgrent='$d_getgrent'
d_getgrps='$d_getgrps'
d_gethbyaddr='$d_gethbyaddr'
d_gethbyname='$d_gethbyname'
d_getppid='$d_getppid'
d_getprior='$d_getprior'
d_getprotoprotos='$d_getprotoprotos'
+d_getpwent='$d_getpwent'
d_getsbyname='$d_getsbyname'
d_getsbyport='$d_getsbyport'
d_getsent='$d_getsent'
d_getservprotos='$d_getservprotos'
d_gettimeod='$d_gettimeod'
d_gnulibc='$d_gnulibc'
+d_grpasswd='$d_grpasswd'
d_htonl='$d_htonl'
d_index='$d_index'
d_inetaton='$d_inetaton'
+d_ino64t='$d_ino64t'
+d_int64t='$d_int64t'
+d_iovec_s='$d_iovec_s'
d_isascii='$d_isascii'
d_killpg='$d_killpg'
d_lchown='$d_lchown'
d_link='$d_link'
d_locconv='$d_locconv'
+d_lockf64='$d_lockf64'
d_lockf='$d_lockf'
d_longdbl='$d_longdbl'
d_longlong='$d_longlong'
+d_lseek64='$d_lseek64'
+d_lstat64='$d_lstat64'
d_lstat='$d_lstat'
d_mblen='$d_mblen'
d_mbstowcs='$d_mbstowcs'
d_memset='$d_memset'
d_mkdir='$d_mkdir'
d_mkfifo='$d_mkfifo'
-d_mknod='$d_mknod'
d_mktime='$d_mktime'
d_msg='$d_msg'
+d_msg_ctrunc='$d_msg_ctrunc'
+d_msg_dontroute='$d_msg_dontroute'
+d_msg_oob='$d_msg_oob'
+d_msg_peek='$d_msg_peek'
+d_msg_proxy='$d_msg_proxy'
d_msgctl='$d_msgctl'
d_msgget='$d_msgget'
+d_msghdr_s='$d_msghdr_s'
d_msgrcv='$d_msgrcv'
d_msgsnd='$d_msgsnd'
d_mymalloc='$d_mymalloc'
+d_nextkey64='$d_nextkey64'
d_nice='$d_nice'
+d_off64t='$d_off64t'
d_oldpthreads='$d_oldpthreads'
d_oldsock='$d_oldsock'
d_open3='$d_open3'
+d_open64='$d_open64'
+d_opendir64='$d_opendir64'
d_pathconf='$d_pathconf'
d_pause='$d_pause'
d_phostname='$d_phostname'
d_pipe='$d_pipe'
d_poll='$d_poll'
d_portable='$d_portable'
+d_pthread_create_joinable='$d_pthread_create_joinable'
d_pthread_yield='$d_pthread_yield'
-d_pthreads_created_joinable='$d_pthreads_created_joinable'
d_pwage='$d_pwage'
d_pwchange='$d_pwchange'
d_pwclass='$d_pwclass'
d_pwcomment='$d_pwcomment'
d_pwexpire='$d_pwexpire'
d_pwgecos='$d_pwgecos'
+d_pwpasswd='$d_pwpasswd'
d_pwquota='$d_pwquota'
+d_readdir64='$d_readdir64'
d_readdir='$d_readdir'
d_readlink='$d_readlink'
+d_readv='$d_readv'
+d_recvmsg='$d_recvmsg'
d_rename='$d_rename'
d_rewinddir='$d_rewinddir'
d_rmdir='$d_rmdir'
d_safemcpy='$d_safemcpy'
d_sanemcmp='$d_sanemcmp'
d_sched_yield='$d_sched_yield'
+d_scm_rights='$d_scm_rights'
+d_seekdir64='$d_seekdir64'
d_seekdir='$d_seekdir'
d_select='$d_select'
d_sem='$d_sem'
d_semctl_semun='$d_semctl_semun'
d_semget='$d_semget'
d_semop='$d_semop'
+d_sendmsg='$d_sendmsg'
d_setegid='$d_setegid'
d_seteuid='$d_seteuid'
+d_setgrent='$d_setgrent'
d_setgrps='$d_setgrps'
d_sethent='$d_sethent'
d_setlinebuf='$d_setlinebuf'
d_setpgrp2='$d_setpgrp2'
d_setpgrp='$d_setpgrp'
d_setprior='$d_setprior'
+d_setpwent='$d_setpwent'
d_setregid='$d_setregid'
d_setresgid='$d_setresgid'
d_setresuid='$d_setresuid'
d_sigsetjmp='$d_sigsetjmp'
d_socket='$d_socket'
d_sockpair='$d_sockpair'
+d_stat64='$d_stat64'
d_statblks='$d_statblks'
d_stdio_cnt_lval='$d_stdio_cnt_lval'
d_stdio_ptr_lval='$d_stdio_ptr_lval'
d_stdiobase='$d_stdiobase'
d_stdstdio='$d_stdstdio'
+d_store64='$d_store64'
d_strchr='$d_strchr'
d_strcoll='$d_strcoll'
d_strctcpy='$d_strctcpy'
d_system='$d_system'
d_tcgetpgrp='$d_tcgetpgrp'
d_tcsetpgrp='$d_tcsetpgrp'
+d_telldir64='$d_telldir64'
d_telldir='$d_telldir'
d_time='$d_time'
d_times='$d_times'
+d_tmpfile64='$d_tmpfile64'
+d_truncate64='$d_truncate64'
d_truncate='$d_truncate'
d_tzname='$d_tzname'
d_umask='$d_umask'
d_waitpid='$d_waitpid'
d_wcstombs='$d_wcstombs'
d_wctomb='$d_wctomb'
+d_writev='$d_writev'
d_xenix='$d_xenix'
date='$date'
db_hashtype='$db_hashtype'
db_prefixtype='$db_prefixtype'
defvoidused='$defvoidused'
-devtype='$devtype'
direntrytype='$direntrytype'
dlext='$dlext'
dlsrc='$dlsrc'
doublesize='$doublesize'
+drand01='$drand01'
dynamic_ext='$dynamic_ext'
eagain='$eagain'
+ebcdic='$ebcdic'
echo='$echo'
egrep='$egrep'
emacs='$emacs'
hint='$hint'
hostcat='$hostcat'
huge='$huge'
+i_arpainet='$i_arpainet'
i_bsdioctl='$i_bsdioctl'
i_db='$i_db'
i_dbm='$i_dbm'
i_float='$i_float'
i_gdbm='$i_gdbm'
i_grp='$i_grp'
+i_inttypes='$i_inttypes'
i_limits='$i_limits'
i_locale='$i_locale'
+i_machcthr='$i_machcthr'
i_malloc='$i_malloc'
i_math='$i_math'
i_memory='$i_memory'
i_netdb='$i_netdb'
i_neterrno='$i_neterrno'
i_niin='$i_niin'
+i_poll='$i_poll'
i_pwd='$i_pwd'
i_rpcsvcdbm='$i_rpcsvcdbm'
i_sfio='$i_sfio'
i_stddef='$i_stddef'
i_stdlib='$i_stdlib'
i_string='$i_string'
+i_sysaccess='$i_sysaccess'
i_sysdir='$i_sysdir'
i_sysfile='$i_sysfile'
i_sysfilio='$i_sysfilio'
i_sysndir='$i_sysndir'
i_sysparam='$i_sysparam'
i_sysresrc='$i_sysresrc'
+i_syssecrt='$i_syssecrt'
i_sysselct='$i_sysselct'
i_syssockio='$i_syssockio'
i_sysstat='$i_sysstat'
i_systimek='$i_systimek'
i_systimes='$i_systimes'
i_systypes='$i_systypes'
+i_sysuio='$i_sysuio'
i_sysun='$i_sysun'
i_syswait='$i_syswait'
i_termio='$i_termio'
i_varargs='$i_varargs'
i_varhdr='$i_varhdr'
i_vfork='$i_vfork'
+ignore_versioned_solibs='$ignore_versioned_solibs'
incpath='$incpath'
inews='$inews'
installarchlib='$installarchlib'
lp='$lp'
lpr='$lpr'
ls='$ls'
+lseeksize='$lseeksize'
lseektype='$lseektype'
mail='$mail'
mailx='$mailx'
nm='$nm'
nm_opt='$nm_opt'
nm_so_opt='$nm_so_opt'
+nonxs_ext='$nonxs_ext'
nroff='$nroff'
o_nonblock='$o_nonblock'
obj_ext='$obj_ext'
perl='$perl'
perladmin='$perladmin'
perlpath='$perlpath'
-nonxs_ext='$nonxs_ext'
pg='$pg'
phostname='$phostname'
pidtype='$pidtype'
privlib='$privlib'
privlibexp='$privlibexp'
prototype='$prototype'
+pthread_create_joinable='$pthread_create_joinable'
ptrsize='$ptrsize'
randbits='$randbits'
+randfunc='$randfunc'
+randseedtype='$randseedtype'
ranlib='$ranlib'
rd_nodata='$rd_nodata'
rm='$rm'
rmail='$rmail'
runnm='$runnm'
+sched_yield='$sched_yield'
scriptdir='$scriptdir'
scriptdirexp='$scriptdirexp'
sed='$sed'
+seedfunc='$seedfunc'
+selectminbits='$selectminbits'
selecttype='$selecttype'
sendmail='$sendmail'
sh='$sh'
sig_name='$sig_name'
sig_name_init='$sig_name_init'
sig_num='$sig_num'
+sig_num_init='$sig_num_init'
signal_t='$signal_t'
sitearch='$sitearch'
sitearchexp='$sitearchexp'
timetype='$timetype'
touch='$touch'
tr='$tr'
+trnl='$trnl'
troff='$troff'
uidtype='$uidtype'
uname='$uname'
uniq='$uniq'
+use64bits='$use64bits'
usedl='$usedl'
+usemultiplicity='$usemultiplicity'
usemymalloc='$usemymalloc'
usenm='$usenm'
useopcode='$useopcode'
usevfork='$usevfork'
usrinc='$usrinc'
uuname='$uuname'
+version='$version'
vi='$vi'
voidflags='$voidflags'
xlibpth='$xlibpth'
*)
$cat <<EOM
-Now you need to generate make dependencies by running "make depend".
-You might prefer to run it in background: "make depend > makedepend.out &"
+Now you need to generate make dependencies by running "$make depend".
+You might prefer to run it in background: "$make depend > makedepend.out &"
It can take a while, so you might not want to run it right now.
EOM
;;
esac
- rp="Run make depend now?"
+ rp="Run $make depend now?"
. UU/myread
case "$ans" in
y*)
- make depend && echo "Now you must run a make."
+ $make depend && echo "Now you must run a $make."
;;
*)
- echo "You must run 'make depend' then 'make'."
+ echo "You must run '$make depend' then '$make'."
;;
esac
elif test -f [Mm]akefile; then
echo " "
- echo "Now you must run a make."
+ echo "Now you must run a $make."
else
echo "Done."
fi
https://perl5.git.perl.org / perl5.git / blobdiff