(int)offset, RExC_precomp, RExC_precomp + offset); \
} STMT_END
-#define ckWARN2regdep(loc,m, a1) STMT_START { \
+#define ckWARN2reg_d(loc,m, a1) STMT_START { \
const IV offset = loc - RExC_precomp; \
- Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
+ Perl_ck_warner_d(aTHX_ packWARN(WARN_REGEXP), \
m REPORT_LOCATION, \
a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
} STMT_END
}
/* These two functions currently do the exact same thing */
-#define cl_init_zero S_cl_init
+#define cl_init_zero cl_init
/* 'AND' a given class with another one. Can create false positives. 'cl'
* should not be inverted. 'and_with->flags & ANYOF_CLASS' should be 0 if
I32 sawlookahead = 0;
I32 sawplus = 0;
I32 sawopen = 0;
+ I32 sawminmod = 0;
+
regex_charset initial_charset = get_regex_charset(orig_rx_flags);
bool recompile = 0;
bool runtime_code = 0;
}
reStudy:
- r->minlen = minlen = sawlookahead = sawplus = sawopen = 0;
+ r->minlen = minlen = sawlookahead = sawplus = sawopen = sawminmod = 0;
Zero(r->substrs, 1, struct reg_substr_data);
#ifdef TRIE_STUDY_OPT
* the only op that could be a regnode is PLUS, all the rest
* will be regnode_1 or regnode_2.
*
+ * (yves doesn't think this is true)
*/
if (OP(first) == PLUS)
sawplus = 1;
- else
+ else {
+ if (OP(first) == MINMOD)
+ sawminmod = 1;
first += regarglen[OP(first)];
-
+ }
first = NEXTOPER(first);
first_next= regnext(first);
}
first = NEXTOPER(first);
goto again;
}
- if (sawplus && !sawlookahead && (!sawopen || !RExC_sawback)
+ if (sawplus && !sawminmod && !sawlookahead && (!sawopen || !RExC_sawback)
&& !pRExC_state->num_code_blocks) /* May examine pos and $& */
/* x+ must match at the 1st pos of run of x's */
r->intflags |= PREGf_SKIP;
/* This section of code defines the inversion list object and its methods. The
* interfaces are highly subject to change, so as much as possible is static to
* this file. An inversion list is here implemented as a malloc'd C UV array
- * with some added info that is placed as UVs at the beginning in a header
- * portion. An inversion list for Unicode is an array of code points, sorted
- * by ordinal number. The zeroth element is the first code point in the list.
- * The 1th element is the first element beyond that not in the list. In other
- * words, the first range is
+ * as an SVt_INVLIST scalar.
+ *
+ * An inversion list for Unicode is an array of code points, sorted by ordinal
+ * number. The zeroth element is the first code point in the list. The 1th
+ * element is the first element beyond that not in the list. In other words,
+ * the first range is
* invlist[0]..(invlist[1]-1)
* The other ranges follow. Thus every element whose index is divisible by two
* marks the beginning of a range that is in the list, and every element not
* Taking the complement (inverting) an inversion list is quite simple, if the
* first element is 0, remove it; otherwise add a 0 element at the beginning.
* This implementation reserves an element at the beginning of each inversion
- * list to contain 0 when the list contains 0, and contains 1 otherwise. The
- * actual beginning of the list is either that element if 0, or the next one if
- * 1.
+ * list to always contain 0; there is an additional flag in the header which
+ * indicates if the list begins at the 0, or is offset to begin at the next
+ * element.
*
* More about inversion lists can be found in "Unicode Demystified"
* Chapter 13 by Richard Gillam, published by Addison-Wesley.
* should eventually be made public */
/* The header definitions are in F<inline_invlist.c> */
-#define TO_INTERNAL_SIZE(x) (((x) + HEADER_LENGTH) * sizeof(UV))
-#define FROM_INTERNAL_SIZE(x) (((x)/ sizeof(UV)) - HEADER_LENGTH)
-
-#define INVLIST_INITIAL_LEN 10
PERL_STATIC_INLINE UV*
S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0)
{
/* Returns a pointer to the first element in the inversion list's array.
* This is called upon initialization of an inversion list. Where the
- * array begins depends on whether the list has the code point U+0000
- * in it or not. The other parameter tells it whether the code that
- * follows this call is about to put a 0 in the inversion list or not.
- * The first element is either the element with 0, if 0, or the next one,
- * if 1 */
+ * array begins depends on whether the list has the code point U+0000 in it
+ * or not. The other parameter tells it whether the code that follows this
+ * call is about to put a 0 in the inversion list or not. The first
+ * element is either the element reserved for 0, if TRUE, or the element
+ * after it, if FALSE */
- UV* zero = get_invlist_zero_addr(invlist);
+ bool* offset = get_invlist_offset_addr(invlist);
+ UV* zero_addr = (UV *) SvPVX(invlist);
PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT;
/* Must be empty */
- assert(! *_get_invlist_len_addr(invlist));
+ assert(! _invlist_len(invlist));
+
+ *zero_addr = 0;
/* 1^1 = 0; 1^0 = 1 */
- *zero = 1 ^ will_have_0;
- return zero + *zero;
+ *offset = 1 ^ will_have_0;
+ return zero_addr + *offset;
}
PERL_STATIC_INLINE UV*
/* Must not be empty. If these fail, you probably didn't check for <len>
* being non-zero before trying to get the array */
- assert(*_get_invlist_len_addr(invlist));
- assert(*get_invlist_zero_addr(invlist) == 0
- || *get_invlist_zero_addr(invlist) == 1);
-
- /* The array begins either at the element reserved for zero if the
- * list contains 0 (that element will be set to 0), or otherwise the next
- * element (in which case the reserved element will be set to 1). */
- return (UV *) (get_invlist_zero_addr(invlist)
- + *get_invlist_zero_addr(invlist));
+ assert(_invlist_len(invlist));
+
+ /* The very first element always contains zero, The array begins either
+ * there, or if the inversion list is offset, at the element after it.
+ * The offset header field determines which; it contains 0 or 1 to indicate
+ * how much additionally to add */
+ assert(0 == *(SvPVX(invlist)));
+ return ((UV *) SvPVX(invlist) + *get_invlist_offset_addr(invlist));
}
PERL_STATIC_INLINE void
-S_invlist_set_len(pTHX_ SV* const invlist, const UV len)
+S_invlist_set_len(pTHX_ SV* const invlist, const UV len, const bool offset)
{
- /* Sets the current number of elements stored in the inversion list */
+ /* Sets the current number of elements stored in the inversion list.
+ * Updates SvCUR correspondingly */
PERL_ARGS_ASSERT_INVLIST_SET_LEN;
- *_get_invlist_len_addr(invlist) = len;
-
- assert(len <= SvLEN(invlist));
-
- SvCUR_set(invlist, TO_INTERNAL_SIZE(len));
- /* If the list contains U+0000, that element is part of the header,
- * and should not be counted as part of the array. It will contain
- * 0 in that case, and 1 otherwise. So we could flop 0=>1, 1=>0 and
- * subtract:
- * SvCUR_set(invlist,
- * TO_INTERNAL_SIZE(len
- * - (*get_invlist_zero_addr(inv_list) ^ 1)));
- * But, this is only valid if len is not 0. The consequences of not doing
- * this is that the memory allocation code may think that 1 more UV is
- * being used than actually is, and so might do an unnecessary grow. That
- * seems worth not bothering to make this the precise amount.
- *
- * Note that when inverting, SvCUR shouldn't change */
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
+ SvCUR_set(invlist,
+ (len == 0)
+ ? 0
+ : TO_INTERNAL_SIZE(len + offset));
+ assert(SvLEN(invlist) == 0 || SvCUR(invlist) <= SvLEN(invlist));
}
PERL_STATIC_INLINE IV*
S_get_invlist_previous_index_addr(pTHX_ SV* invlist)
{
- /* Return the address of the UV that is reserved to hold the cached index
+ /* Return the address of the IV that is reserved to hold the cached index
* */
PERL_ARGS_ASSERT_GET_INVLIST_PREVIOUS_INDEX_ADDR;
- return (IV *) (SvPVX(invlist) + (INVLIST_PREVIOUS_INDEX_OFFSET * sizeof (UV)));
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
+ return &(((XINVLIST*) SvANY(invlist))->prev_index);
}
PERL_STATIC_INLINE IV
PERL_ARGS_ASSERT_INVLIST_MAX;
- return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
- ? _invlist_len(invlist)
- : FROM_INTERNAL_SIZE(SvLEN(invlist));
-}
-
-PERL_STATIC_INLINE UV*
-S_get_invlist_zero_addr(pTHX_ SV* invlist)
-{
- /* Return the address of the UV that is reserved to hold 0 if the inversion
- * list contains 0. This has to be the last element of the heading, as the
- * list proper starts with either it if 0, or the next element if not.
- * (But we force it to contain either 0 or 1) */
-
- PERL_ARGS_ASSERT_GET_INVLIST_ZERO_ADDR;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
- return (UV *) (SvPVX(invlist) + (INVLIST_ZERO_OFFSET * sizeof (UV)));
+ /* Assumes worst case, in which the 0 element is not counted in the
+ * inversion list, so subtracts 1 for that */
+ return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
+ ? FROM_INTERNAL_SIZE(SvCUR(invlist)) - 1
+ : FROM_INTERNAL_SIZE(SvLEN(invlist)) - 1;
}
#ifndef PERL_IN_XSUB_RE
SV* new_list;
if (initial_size < 0) {
- initial_size = INVLIST_INITIAL_LEN;
+ initial_size = 10;
}
/* Allocate the initial space */
- new_list = newSV(TO_INTERNAL_SIZE(initial_size));
- invlist_set_len(new_list, 0);
+ new_list = newSV_type(SVt_INVLIST);
- /* Force iterinit() to be used to get iteration to work */
- *get_invlist_iter_addr(new_list) = UV_MAX;
+ /* First 1 is in case the zero element isn't in the list; second 1 is for
+ * trailing NUL */
+ SvGROW(new_list, TO_INTERNAL_SIZE(initial_size + 1) + 1);
+ invlist_set_len(new_list, 0, 0);
- /* This should force a segfault if a method doesn't initialize this
- * properly */
- *get_invlist_zero_addr(new_list) = UV_MAX;
+ /* Force iterinit() to be used to get iteration to work */
+ *get_invlist_iter_addr(new_list) = (STRLEN) UV_MAX;
*get_invlist_previous_index_addr(new_list) = 0;
- *get_invlist_version_id_addr(new_list) = INVLIST_VERSION_ID;
-#if HEADER_LENGTH != 5
-# error Need to regenerate INVLIST_VERSION_ID by running perl -E 'say int(rand 2**31-1)', and then changing the #if to the new length
-#endif
return new_list;
}
#endif
STATIC SV*
-S__new_invlist_C_array(pTHX_ UV* list)
+S__new_invlist_C_array(pTHX_ const UV* const list)
{
/* Return a pointer to a newly constructed inversion list, initialized to
* point to <list>, which has to be in the exact correct inversion list
* form, including internal fields. Thus this is a dangerous routine that
- * should not be used in the wrong hands */
+ * should not be used in the wrong hands. The passed in 'list' contains
+ * several header fields at the beginning that are not part of the
+ * inversion list body proper */
+
+ const STRLEN length = (STRLEN) list[0];
+ const UV version_id = list[1];
+ const bool offset = cBOOL(list[2]);
+#define HEADER_LENGTH 3
+ /* If any of the above changes in any way, you must change HEADER_LENGTH
+ * (if appropriate) and regenerate INVLIST_VERSION_ID by running
+ * perl -E 'say int(rand 2**31-1)'
+ */
+#define INVLIST_VERSION_ID 148565664 /* This is a combination of a version and
+ data structure type, so that one being
+ passed in can be validated to be an
+ inversion list of the correct vintage.
+ */
- SV* invlist = newSV_type(SVt_PV);
+ SV* invlist = newSV_type(SVt_INVLIST);
PERL_ARGS_ASSERT__NEW_INVLIST_C_ARRAY;
- SvPV_set(invlist, (char *) list);
+ if (version_id != INVLIST_VERSION_ID) {
+ Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
+ }
+
+ /* The generated array passed in includes header elements that aren't part
+ * of the list proper, so start it just after them */
+ SvPV_set(invlist, (char *) (list + HEADER_LENGTH));
+
SvLEN_set(invlist, 0); /* Means we own the contents, and the system
shouldn't touch it */
- SvCUR_set(invlist, TO_INTERNAL_SIZE(_invlist_len(invlist)));
- if (*get_invlist_version_id_addr(invlist) != INVLIST_VERSION_ID) {
- Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
- }
+ *(get_invlist_offset_addr(invlist)) = offset;
- /* Initialize the iteration pointer.
- * XXX This could be done at compile time in charclass_invlists.h, but I
- * (khw) am not confident that the suffixes for specifying the C constant
- * UV_MAX are portable, e.g. 'ull' on a 32 bit machine that is configured
- * to use 64 bits; might need a Configure probe */
+ /* The 'length' passed to us is the physical number of elements in the
+ * inversion list. But if there is an offset the logical number is one
+ * less than that */
+ invlist_set_len(invlist, length - offset, offset);
+
+ invlist_set_previous_index(invlist, 0);
+
+ /* Initialize the iteration pointer. */
invlist_iterfinish(invlist);
return invlist;
PERL_ARGS_ASSERT_INVLIST_EXTEND;
- SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max));
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
+ /* Add one to account for the zero element at the beginning which may not
+ * be counted by the calling parameters */
+ SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max + 1));
}
PERL_STATIC_INLINE void
{
PERL_ARGS_ASSERT_INVLIST_TRIM;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
+
/* Change the length of the inversion list to how many entries it currently
* has */
-
SvPV_shrink_to_cur((SV *) invlist);
}
UV* array;
UV max = invlist_max(invlist);
UV len = _invlist_len(invlist);
+ bool offset;
PERL_ARGS_ASSERT__APPEND_RANGE_TO_INVLIST;
if (len == 0) { /* Empty lists must be initialized */
- array = _invlist_array_init(invlist, start == 0);
+ offset = start != 0;
+ array = _invlist_array_init(invlist, ! offset);
}
else {
/* Here, the existing list is non-empty. The current max entry in the
* value not in the set, it is extending the set, so the new first
* value not in the set is one greater than the newly extended range.
* */
+ offset = *get_invlist_offset_addr(invlist);
if (array[final_element] == start) {
if (end != UV_MAX) {
array[final_element] = end + 1;
else {
/* But if the end is the maximum representable on the machine,
* just let the range that this would extend to have no end */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, offset);
}
return;
}
len += 2; /* Includes an element each for the start and end of range */
- /* If overflows the existing space, extend, which may cause the array to be
- * moved */
+ /* If wll overflow the existing space, extend, which may cause the array to
+ * be moved */
if (max < len) {
invlist_extend(invlist, len);
- invlist_set_len(invlist, len); /* Have to set len here to avoid assert
- failure in invlist_array() */
+
+ /* Have to set len here to avoid assert failure in invlist_array() */
+ invlist_set_len(invlist, len, offset);
+
array = invlist_array(invlist);
}
else {
- invlist_set_len(invlist, len);
+ invlist_set_len(invlist, len, offset);
}
/* The next item on the list starts the range, the one after that is
else {
/* But if the end is the maximum representable on the machine, just let
* the range have no end */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, offset);
}
}
}
void
-Perl__invlist_union_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** output)
+Perl__invlist_union_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, const bool complement_b, SV** output)
{
/* Take the union of two inversion lists and point <output> to it. *output
* SHOULD BE DEFINED upon input, and if it points to one of the two lists,
* return the larger of the input lists, but then outside code might need
* to keep track of whether to free the input list or not */
- UV* array_a; /* a's array */
- UV* array_b;
+ const UV* array_a; /* a's array */
+ const UV* array_b;
UV len_a; /* length of a's array */
UV len_b;
if (complement_b) {
/* To complement, we invert: if the first element is 0, remove it. To
- * do this, we just pretend the array starts one later, and clear the
- * flag as we don't have to do anything else later */
+ * do this, we just pretend the array starts one later */
if (array_b[0] == 0) {
array_b++;
len_b--;
- complement_b = FALSE;
}
else {
- /* But if the first element is not zero, we unshift a 0 before the
- * array. The data structure reserves a space for that 0 (which
- * should be a '1' right now), so physical shifting is unneeded,
- * but temporarily change that element to 0. Before exiting the
- * routine, we must restore the element to '1' */
+ /* But if the first element is not zero, we pretend the list starts
+ * at the 0 that is always stored immediately before the array. */
array_b--;
len_b++;
- array_b[0] = 0;
}
}
/* Set result to final length, which can change the pointer to array_u, so
* re-find it */
if (len_u != _invlist_len(u)) {
- invlist_set_len(u, len_u);
+ invlist_set_len(u, len_u, *get_invlist_offset_addr(u));
invlist_trim(u);
array_u = invlist_array(u);
}
}
}
- /* If we've changed b, restore it */
- if (complement_b) {
- array_b[0] = 1;
- }
-
/* We may be removing a reference to one of the inputs */
if (a == *output || b == *output) {
assert(! invlist_is_iterating(*output));
}
void
-Perl__invlist_intersection_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** i)
+Perl__invlist_intersection_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, const bool complement_b, SV** i)
{
/* Take the intersection of two inversion lists and point <i> to it. *i
* SHOULD BE DEFINED upon input, and if it points to one of the two lists,
* union above
*/
- UV* array_a; /* a's array */
- UV* array_b;
+ const UV* array_a; /* a's array */
+ const UV* array_b;
UV len_a; /* length of a's array */
UV len_b;
if (complement_b) {
/* To complement, we invert: if the first element is 0, remove it. To
- * do this, we just pretend the array starts one later, and clear the
- * flag as we don't have to do anything else later */
+ * do this, we just pretend the array starts one later */
if (array_b[0] == 0) {
array_b++;
len_b--;
- complement_b = FALSE;
}
else {
- /* But if the first element is not zero, we unshift a 0 before the
- * array. The data structure reserves a space for that 0 (which
- * should be a '1' right now), so physical shifting is unneeded,
- * but temporarily change that element to 0. Before exiting the
- * routine, we must restore the element to '1' */
+ /* But if the first element is not zero, we pretend the list starts
+ * at the 0 that is always stored immediately before the array. */
array_b--;
len_b++;
- array_b[0] = 0;
}
}
/* Set result to final length, which can change the pointer to array_r, so
* re-find it */
if (len_r != _invlist_len(r)) {
- invlist_set_len(r, len_r);
+ invlist_set_len(r, len_r, *get_invlist_offset_addr(r));
invlist_trim(r);
array_r = invlist_array(r);
}
}
}
- /* If we've changed b, restore it */
- if (complement_b) {
- array_b[0] = 1;
- }
-
/* We may be removing a reference to one of the inputs */
if (a == *i || b == *i) {
assert(! invlist_is_iterating(*i));
* have a zero; removes it otherwise. As described above, the data
* structure is set up so that this is very efficient */
- UV* len_pos = _get_invlist_len_addr(invlist);
-
PERL_ARGS_ASSERT__INVLIST_INVERT;
assert(! invlist_is_iterating(invlist));
/* The inverse of matching nothing is matching everything */
- if (*len_pos == 0) {
+ if (_invlist_len(invlist) == 0) {
_append_range_to_invlist(invlist, 0, UV_MAX);
return;
}
- /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the
- * zero element was a 0, so it is being removed, so the length decrements
- * by 1; and vice-versa. SvCUR is unaffected */
- if (*get_invlist_zero_addr(invlist) ^= 1) {
- (*len_pos)--;
- }
- else {
- (*len_pos)++;
- }
+ *get_invlist_offset_addr(invlist) = ! *get_invlist_offset_addr(invlist);
}
void
invlist_extend(invlist, len);
array = invlist_array(invlist);
}
- invlist_set_len(invlist, len);
+ invlist_set_len(invlist, len, *get_invlist_offset_addr(invlist));
array[len - 1] = PERL_UNICODE_MAX + 1;
}
else { /* Remove the 0x110000 */
- invlist_set_len(invlist, len - 1);
+ invlist_set_len(invlist, len - 1, *get_invlist_offset_addr(invlist));
}
}
/* Need to allocate extra space to accommodate Perl's addition of a
* trailing NUL to SvPV's, since it thinks they are always strings */
SV* new_invlist = _new_invlist(_invlist_len(invlist) + 1);
- STRLEN length = SvCUR(invlist);
+ STRLEN physical_length = SvCUR(invlist);
+ bool offset = *(get_invlist_offset_addr(invlist));
PERL_ARGS_ASSERT_INVLIST_CLONE;
- SvCUR_set(new_invlist, length); /* This isn't done automatically */
- Copy(SvPVX(invlist), SvPVX(new_invlist), length, char);
+ *(get_invlist_offset_addr(new_invlist)) = offset;
+ invlist_set_len(new_invlist, _invlist_len(invlist), offset);
+ Copy(SvPVX(invlist), SvPVX(new_invlist), physical_length, char);
return new_invlist;
}
-PERL_STATIC_INLINE UV*
+PERL_STATIC_INLINE STRLEN*
S_get_invlist_iter_addr(pTHX_ SV* invlist)
{
/* Return the address of the UV that contains the current iteration
PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR;
- return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV)));
-}
-
-PERL_STATIC_INLINE UV*
-S_get_invlist_version_id_addr(pTHX_ SV* invlist)
-{
- /* Return the address of the UV that contains the version id. */
-
- PERL_ARGS_ASSERT_GET_INVLIST_VERSION_ID_ADDR;
+ assert(SvTYPE(invlist) == SVt_INVLIST);
- return (UV *) (SvPVX(invlist) + (INVLIST_VERSION_ID_OFFSET * sizeof (UV)));
+ return &(((XINVLIST*) SvANY(invlist))->iterator);
}
PERL_STATIC_INLINE void
PERL_ARGS_ASSERT_INVLIST_ITERFINISH;
- *get_invlist_iter_addr(invlist) = UV_MAX;
+ *get_invlist_iter_addr(invlist) = (STRLEN) UV_MAX;
}
STATIC bool
* <*start> and <*end> are unchanged, and the next call to this function
* will start over at the beginning of the list */
- UV* pos = get_invlist_iter_addr(invlist);
+ STRLEN* pos = get_invlist_iter_addr(invlist);
UV len = _invlist_len(invlist);
UV *array;
PERL_ARGS_ASSERT_INVLIST_ITERNEXT;
if (*pos >= len) {
- *pos = UV_MAX; /* Force iterinit() to be required next time */
+ *pos = (STRLEN) UV_MAX; /* Force iterinit() to be required next time */
return FALSE;
}
{
PERL_ARGS_ASSERT_INVLIST_IS_ITERATING;
- return *(get_invlist_iter_addr(invlist)) < UV_MAX;
+ return *(get_invlist_iter_addr(invlist)) < (STRLEN) UV_MAX;
}
PERL_STATIC_INLINE UV
#if 0
bool
-S__invlistEQ(pTHX_ SV* const a, SV* const b, bool complement_b)
+S__invlistEQ(pTHX_ SV* const a, SV* const b, const bool complement_b)
{
/* Return a boolean as to if the two passed in inversion lists are
* identical. The final argument, if TRUE, says to take the complement of
* the second inversion list before doing the comparison */
- UV* array_a = invlist_array(a);
- UV* array_b = invlist_array(b);
+ const UV* array_a = invlist_array(a);
+ const UV* array_b = invlist_array(b);
UV len_a = _invlist_len(a);
UV len_b = _invlist_len(b);
/* Otherwise, to complement, we invert. Here, the first element is
* 0, just remove it. To do this, we just pretend the array starts
- * one later, and clear the flag as we don't have to do anything
- * else later */
+ * one later */
array_b++;
len_b--;
- complement_b = FALSE;
}
else {
- /* But if the first element is not zero, we unshift a 0 before the
- * array. The data structure reserves a space for that 0 (which
- * should be a '1' right now), so physical shifting is unneeded,
- * but temporarily change that element to 0. Before exiting the
- * routine, we must restore the element to '1' */
+ /* But if the first element is not zero, we pretend the list starts
+ * at the 0 that is always stored immediately before the array. */
array_b--;
len_b++;
- array_b[0] = 0;
}
}
}
}
- if (complement_b) {
- array_b[0] = 1;
- }
return retval;
}
#endif
#undef HEADER_LENGTH
-#undef INVLIST_INITIAL_LENGTH
#undef TO_INTERNAL_SIZE
#undef FROM_INTERNAL_SIZE
-#undef INVLIST_LEN_OFFSET
-#undef INVLIST_ZERO_OFFSET
-#undef INVLIST_ITER_OFFSET
#undef INVLIST_VERSION_ID
-#undef INVLIST_PREVIOUS_INDEX_OFFSET
/* End of inversion list object */
ret = reg_node(pRExC_state, OPFAIL);
return ret;
}
- else if (max == 0) { /* replace {0} with a nothing node */
- if (SIZE_ONLY) {
- RExC_size = PREVOPER(RExC_size) - regarglen[(U8)NOTHING];
- }
- else {
- RExC_emit = orig_emit;
- }
- ret = reg_node(pRExC_state, NOTHING);
- return ret;
- }
do_curly:
if ((flags&SIMPLE)) {
reginsert(pRExC_state, MINMOD, ret, depth+1);
REGTAIL(pRExC_state, ret, ret + NODE_STEP_REGNODE);
}
-#ifndef REG_ALLOW_MINMOD_SUSPEND
else
-#endif
if (RExC_parse < RExC_end && *RExC_parse == '+') {
regnode *ender;
nextchar(pRExC_state);
ret->flags = 0;
ender = reg_node(pRExC_state, TAIL);
REGTAIL(pRExC_state, ret, ender);
- /*ret= ender;*/
}
if (RExC_parse < RExC_end && ISMULT2(RExC_parse)) {
if (num < 1)
vFAIL("Reference to nonexistent or unclosed group");
}
- if (!isg && num > 9 && num >= RExC_npar)
+ if (!isg && num > 9 && num >= RExC_npar && *RExC_parse != '8' && *RExC_parse != '9')
/* Probably a character specified in octal, e.g. \35 */
goto defchar;
else {
p++;
ender = grok_bslash_c(*p++, UTF, SIZE_ONLY);
break;
- case '0': case '1': case '2': case '3':case '4':
+ case '8': case '9': /* must be a backreference */
+ --p;
+ goto loopdone;
+ case '1': case '2': case '3':case '4':
case '5': case '6': case '7':
- if (*p == '0' ||
- (isDIGIT(p[1]) && atoi(p) >= RExC_npar))
+ /* When we parse backslash escapes there is ambiguity between
+ * backreferences and octal escapes. Any escape from \1 - \9 is
+ * a backreference, any multi-digit escape which does not start with
+ * 0 and which when evaluated as decimal could refer to an already
+ * parsed capture buffer is a backslash. Anything else is octal.
+ *
+ * Note this implies that \118 could be interpreted as 118 OR as
+ * "\11" . "8" depending on whether there were 118 capture buffers
+ * defined already in the pattern.
+ */
+ if ( !isDIGIT(p[1]) || atoi(p) <= RExC_npar )
+ { /* Not to be treated as an octal constant, go
+ find backref */
+ --p;
+ goto loopdone;
+ }
+ case '0':
{
I32 flags = PERL_SCAN_SILENT_ILLDIGIT;
STRLEN numlen = 3;
form_short_octal_warning(p, numlen));
}
}
- else { /* Not to be treated as an octal constant, go
- find backref */
- --p;
- goto loopdone;
- }
if (PL_encoding && ender < 0x100)
goto recode_encoding;
break;
loopdone: /* Jumped to when encounters something that shouldn't be in
the node */
- /* If 'maybe_exact' is still set here, means there are no
- * code points in the node that participate in folds */
- if (FOLD && maybe_exact) {
- OP(ret) = EXACT;
- }
-
/* I (khw) don't know if you can get here with zero length, but the
* old code handled this situation by creating a zero-length EXACT
* node. Might as well be NOTHING instead */
OP(ret) = NOTHING;
}
else{
+
+ /* If 'maybe_exact' is still set here, means there are no
+ * code points in the node that participate in folds */
+ if (FOLD && maybe_exact) {
+ OP(ret) = EXACT;
+ }
alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, len, ender);
}
default:
/* Use deprecated warning to increase the
* chances of this being output */
- ckWARN2regdep(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j);
+ ckWARN2reg_d(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j);
break;
}
}
- regdump - dump a regexp onto Perl_debug_log in vaguely comprehensible form
*/
#ifdef DEBUGGING
+
+static void
+S_regdump_intflags(pTHX_ const char *lead, const U32 flags)
+{
+ int bit;
+ int set=0;
+
+ for (bit=0; bit<32; bit++) {
+ if (flags & (1<<bit)) {
+ if (!set++ && lead)
+ PerlIO_printf(Perl_debug_log, "%s",lead);
+ PerlIO_printf(Perl_debug_log, "%s ",PL_reg_intflags_name[bit]);
+ }
+ }
+ if (lead) {
+ if (set)
+ PerlIO_printf(Perl_debug_log, "\n");
+ else
+ PerlIO_printf(Perl_debug_log, "%s[none-set]\n",lead);
+ }
+}
+
static void
S_regdump_extflags(pTHX_ const char *lead, const U32 flags)
{
if (r->extflags & RXf_EVAL_SEEN)
PerlIO_printf(Perl_debug_log, "with eval ");
PerlIO_printf(Perl_debug_log, "\n");
- DEBUG_FLAGS_r(regdump_extflags("r->extflags: ",r->extflags));
+ DEBUG_FLAGS_r({
+ regdump_extflags("r->extflags: ",r->extflags);
+ regdump_intflags("r->intflags: ",r->intflags);
+ });
#else
PERL_ARGS_ASSERT_REGDUMP;
PERL_UNUSED_CONTEXT;
https://perl5.git.perl.org / perl5.git / blobdiff