# Note that the order in this file is important.
#
# Format for first section:
-# NAME \s+ TYPE, arg-description [num-args] [flags] [longjump-len] ; DESCRIPTION
-# flag <S> means is REGNODE_SIMPLE; flag <V> means is REGNODE_VARIES
-#
+# NAME \s+ TYPE, arg-description [struct regnode suffix] [flags] [longjump] ; DESCRIPTION
+# arg-description is currently unused
+# suffix is appended to 'struct_regnode_' giving which one to use. If empty,
+# it means plain 'struct regnode'. If the regnode is a string one, this
+# should instead refer to the base regnode, without the char[1] element
+# of the structure
+# flag <S> means is REGNODE_SIMPLE; flag <V> means is REGNODE_VARIES; <.> is
+# a placeholder
+# longjump is 1 if the (first) argument holds the next offset (instead of the
+# usual 'next_offset' field
#
# run perl regen.pl after editing this file
+# +- suffix of which struct regnode to use e.g.,
+# | +- flags (S or V) struct regnode_1
+# un- | | +- longjmp (0, blank, or 1) blank means 0
+# Name Type used | | | ; comment
+# --------------------------------------------------------------------------
+# IFMATCH BRANCHJ, off 1 . 1 ; Succeeds if the following matches.
+# UNLESSM BRANCHJ, off 1 . 1 ; Fails if the following matches.
+# SUSPEND BRANCHJ, off 1 V 1 ; "Independent" sub-RE.
+# IFTHEN BRANCHJ, off 1 V 1 ; Switch, should be preceded by switcher.
+# GROUPP GROUPP, num 1 ; Whether the group matched.
#* Exit points
# BOUND, POSIX and their complements are affected, as well as EXACTF.
BOUND BOUND, no ; Like BOUNDA for non-utf8, otherwise match "" between any Unicode \w\W or \W\w
BOUNDL BOUND, no ; Like BOUND/BOUNDU, but \w and \W are defined by current locale
-BOUNDU BOUND, no ; Match "" at any boundary of a given type using Unicode rules
+BOUNDU BOUND, no ; Match "" at any boundary of a given type using /u rules.
BOUNDA BOUND, no ; Match "" at any boundary between \w\W or \W\w, where \w is [_a-zA-Z0-9]
# All NBOUND nodes are required by code in regexec.c to be greater than all BOUND ones
NBOUND NBOUND, no ; Like NBOUNDA for non-utf8, otherwise match "" between any Unicode \w\w or \W\W
NBOUNDL NBOUND, no ; Like NBOUND/NBOUNDU, but \w and \W are defined by current locale
-NBOUNDU NBOUND, no ; Match "" at any non-boundary of a given type using using Unicode rules
+NBOUNDU NBOUND, no ; Match "" at any non-boundary of a given type using using /u rules.
NBOUNDA NBOUND, no ; Match "" betweeen any \w\w or \W\W, where \w is [_a-zA-Z0-9]
#* [Special] alternatives:
REG_ANY REG_ANY, no 0 S ; Match any one character (except newline).
SANY REG_ANY, no 0 S ; Match any one character.
-ANYOF ANYOF, sv 1 S ; Match character in (or not in) this class, single char match only
-ANYOFD ANYOF, sv 1 S ; Like ANYOF, but /d is in effect
-ANYOFL ANYOF, sv 1 S ; Like ANYOF, but /l is in effect
-ANYOFM ANYOFM byte 1 S ; Like ANYOF, but matches an invariant byte as determined by the mask and arg
+ANYOF ANYOF, sv charclass S ; Match character in (or not in) this class, single char match only
+ANYOFD ANYOF, sv charclass S ; Like ANYOF, but /d is in effect
+ANYOFL ANYOF, sv charclass S ; Like ANYOF, but /l is in effect
+ANYOFPOSIXL ANYOF, sv charclass_posixl S ; Like ANYOFL, but matches [[:posix:]] classes
+
+# Must be sequential
+ANYOFH ANYOF, sv 1 S ; Like ANYOF, but only has "High" matches, none in the bitmap; the flags field contains the lowest matchable UTF-8 start byte
+ANYOFHb ANYOF, sv 1 S ; Like ANYOFH, but all matches share the same UTF-8 start byte, given in the flags field
+ANYOFHr ANYOF, sv 1 S ; Like ANYOFH, but the flags field contains packed bounds for all matchable UTF-8 start bytes.
+ANYOFR ANYOFR, packed 1 S ; Matches any character in the range given by its packed args: upper 12 bits is the max delta from the base lower 20; the flags field contains the lowest matchable UTF-8 start byte
+ANYOFRb ANYOFR, packed 1 S ; Like ANYOFR, but all matches share the same UTF-8 start byte, given in the flags field
+# There is no ANYOFRr because khw doesn't think there are likely to be real-world cases where such a large range is used.
+
+ANYOFM ANYOFM, byte 1 S ; Like ANYOF, but matches an invariant byte as determined by the mask and arg
+NANYOFM ANYOFM, byte 1 S ; complement of ANYOFM
#* POSIX Character Classes:
# Order of the below is important. See ordering comment above.
NPOSIXA NPOSIXD, none 0 S ; complement of POSIXA, [[:^class:]]
# End of order is important
-ASCII ASCII, none 0 S ; [[:ascii:]]
-NASCII ASCII, none 0 S ; [[:^ascii:]]
-
CLUMP CLUMP, no 0 V ; Match any extended grapheme cluster sequence
#* Alternation
#*Literals
# NOTE: the relative ordering of these types is important do not change it
-EXACT EXACT, str ; Match this string (preceded by length).
-EXACTL EXACT, str ; Like EXACT, but /l is in effect (used so locale-related warnings can be checked for).
-EXACTF EXACT, str ; Match this non-UTF-8 string (not guaranteed to be folded) using /id rules (w/len).
-EXACTFL EXACT, str ; Match this string (not guaranteed to be folded) using /il rules (w/len).
-EXACTFU EXACT, str ; Match this string (folded iff in UTF-8, length in folding doesn't change if not in UTF-8) using /iu rules (w/len).
-EXACTFA EXACT, str ; Match this string (not guaranteed to be folded) using /iaa rules (w/len).
+EXACT EXACT, str ; Match this string (flags field is the length).
+
+#* In a long string node, the U32 argument is the length, and is
+#* immediately followed by the string.
+LEXACT EXACT, len:str 1; Match this long string (preceded by length; flags unused).
+EXACTL EXACT, str ; Like EXACT, but /l is in effect (used so locale-related warnings can be checked for)
+EXACTF EXACT, str ; Like EXACT, but match using /id rules; (string not UTF-8, ASCII folded; non-ASCII not)
+EXACTFL EXACT, str ; Like EXACT, but match using /il rules; (string not likely to be folded)
+EXACTFU EXACT, str ; Like EXACT, but match using /iu rules; (string folded)
+
+# The reason MICRO and SHARP S aren't folded in non-UTF8 patterns is because
+# they would fold to something that requires UTF-8. SHARP S would normally
+# fold to 'ss', but because of /aa, it instead folds to a pair of LATIN SMALL
+# LETTER LONG S characters (U+017F)
+EXACTFAA EXACT, str ; Like EXACT, but match using /iaa rules; (string folded except in non-UTF8 patterns: MICRO, SHARP S; folded length <= unfolded)
# End of important relative ordering.
-EXACTFU_SS EXACT, str ; Match this string (folded iff in UTF-8, length in folding may change even if not in UTF-8) using /iu rules (w/len).
-EXACTFLU8 EXACT, str ; Rare cirucmstances: like EXACTFU, but is under /l, UTF-8, folded, and everything in it is above 255.
-EXACTFA_NO_TRIE EXACT, str ; Match this string (which is not trie-able; not guaranteed to be folded) using /iaa rules (w/len).
+EXACTFUP EXACT, str ; Like EXACT, but match using /iu rules; (string not UTF-8, folded except MICRO, SHARP S: hence Problematic)
+# In order for a non-UTF-8 EXACTFAA to think the pattern is pre-folded when
+# matching a UTF-8 target string, there would have to be something like an
+# EXACTFAA_MICRO which would not be considered pre-folded for UTF-8 targets,
+# since the fold of the MICRO SIGN would not be done, and would be
+# representable in the UTF-8 target string.
+
+EXACTFLU8 EXACT, str ; Like EXACTFU, but use /il, UTF-8, (string is folded, and everything in it is above 255
+EXACTFAA_NO_TRIE EXACT, str ; Like EXACT, but match using /iaa rules (string not UTF-8, not guaranteed to be folded, not currently trie-able)
+
+
+EXACT_REQ8 EXACT, str ; Like EXACT, but only UTF-8 encoded targets can match
+LEXACT_REQ8 EXACT, len:str 1 ; Like LEXACT, but only UTF-8 encoded targets can match
+EXACTFU_REQ8 EXACT, str ; Like EXACTFU, but only UTF-8 encoded targets can match
+# One could add EXACTFAA8 and something that has the same effect for /l,
+# but these would be extremely uncommon
+
+EXACTFU_S_EDGE EXACT, str ; /di rules, but nothing in it precludes /ui, except begins and/or ends with [Ss]; (string not UTF-8; compile-time only)
#*Do nothing types
SRCLOSE SRCLOSE, none ; Close preceding SROPEN
REF REF, num 1 V ; Match some already matched string
-REFF REF, num 1 V ; Match already matched string, folded using native charset rules for non-utf8
-REFFL REF, num 1 V ; Match already matched string, folded in loc.
+REFF REF, num 1 V ; Match already matched string, using /di rules.
+REFFL REF, num 1 V ; Match already matched string, using /li rules.
# N?REFF[AU] could have been implemented using the FLAGS field of the
# regnode, but by having a separate node type, we can use the existing switch
# statement to avoid some tests
-REFFU REF, num 1 V ; Match already matched string, folded using unicode rules for non-utf8
-REFFA REF, num 1 V ; Match already matched string, folded using unicode rules for non-utf8, no mixing ASCII, non-ASCII
+REFFU REF, num 1 V ; Match already matched string, usng /ui.
+REFFA REF, num 1 V ; Match already matched string, using /aai rules.
#*Named references. Code in regcomp.c assumes that these all are after
#*the numbered references
-NREF REF, no-sv 1 V ; Match some already matched string
-NREFF REF, no-sv 1 V ; Match already matched string, folded using native charset rules for non-utf8
-NREFFL REF, no-sv 1 V ; Match already matched string, folded in loc.
-NREFFU REF, num 1 V ; Match already matched string, folded using unicode rules for non-utf8
-NREFFA REF, num 1 V ; Match already matched string, folded using unicode rules for non-utf8, no mixing ASCII, non-ASCII
+REFN REF, no-sv 1 V ; Match some already matched string
+REFFN REF, no-sv 1 V ; Match already matched string, using /di rules.
+REFFLN REF, no-sv 1 V ; Match already matched string, using /li rules.
+REFFUN REF, num 1 V ; Match already matched string, using /ui rules.
+REFFAN REF, num 1 V ; Match already matched string, using /aai rules.
#*Support for long RE
LONGJMP LONGJMP, off 1 . 1 ; Jump far away.
BRANCHJ BRANCHJ, off 1 V 1 ; BRANCH with long offset.
#*Special Case Regops
-IFMATCH BRANCHJ, off 1 . 2 ; Succeeds if the following matches.
-UNLESSM BRANCHJ, off 1 . 2 ; Fails if the following matches.
+IFMATCH BRANCHJ, off 1 . 1 ; Succeeds if the following matches; non-zero flags "f", next_off "o" means lookbehind assertion starting "f..(f-o)" characters before current
+UNLESSM BRANCHJ, off 1 . 1 ; Fails if the following matches; non-zero flags "f", next_off "o" means lookbehind assertion starting "f..(f-o)" characters before current
SUSPEND BRANCHJ, off 1 V 1 ; "Independent" sub-RE.
IFTHEN BRANCHJ, off 1 V 1 ; Switch, should be preceded by switcher.
GROUPP GROUPP, num 1 ; Whether the group matched.
-
#*The heavy worker
EVAL EVAL, evl/flags 2L ; Execute some Perl code.
GOSUB GOSUB, num/ofs 2L ; recurse to paren arg1 at (signed) ofs arg2
#*Special conditionals
-NGROUPP NGROUPP, no-sv 1 ; Whether the group matched.
+GROUPPN GROUPPN, no-sv 1 ; Whether the group matched.
INSUBP INSUBP, num 1 ; Whether we are in a specific recurse.
DEFINEP DEFINEP, none 1 ; Never execute directly.
BRANCH next:FAIL
CURLYM A,B:FAIL
IFMATCH A:FAIL
-CURLY B_min_known,B_min,B_max:FAIL
+CURLY B_min,B_max:FAIL
COMMIT next:FAIL
MARKPOINT next:FAIL
SKIP next:FAIL
https://perl5.git.perl.org / perl5.git / blobdiff