sunos*)
linklibperl="-lperl"
;;
- netbsd*|freebsd[234]*|openbsd*)
+ netbsd*|freebsd[234]*|openbsd*|dragonfly*)
linklibperl="-L. -lperl"
;;
interix*)
mallocsrc = $mallocsrc
mallocobj = $mallocobj
+madlyh = $madlyh
+madlysrc = $madlysrc
+madlyobj = $madlyobj
LNS = $lns
# NOTE: some systems don't grok "cp -f". XXX Configure test needed?
CPS = $cp
OBJ_EXT = $_o
PATH_SEP = $p_
+# If you're going to use valgrind and it can't be invoked as plain valgrind
+# then you'll need to change this, or override it on the make command line.
+VALGRIND=valgrind
+
FIRSTMAKEFILE = $firstmakefile
# Any special object files needed by this architecture, e.g. os2/os2.obj
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
CONFIGPM = lib/Config.pm lib/Config_heavy.pl
-private = preplibrary $(CONFIGPM) lib/ExtUtils/Miniperl.pm
+private = preplibrary $(CONFIGPM) lib/Config.pod lib/ExtUtils/Miniperl.pm
# Files to be built with variable substitution before miniperl
# is available.
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warnings.h
+h5 = utf8.h warnings.h $(madlyh)
h = $(h1) $(h2) $(h3) $(h4) $(h5)
-c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
-c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
-c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c
+c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c perl.c
+c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
+c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c
+c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
+c5 = $(madlysrc) $(mallocsrc)
-c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c opmini.c
+c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c
-obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
+obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
-lintflags = -hbvxac
+lintflags = \
+ -b \
+ -n \
+ -p \
+ -Ncheck=%all \
+ -Nlevel=4 \
+ -errchk=parentheses \
+ -errhdr=%all \
+ -errfmt=src \
+ -errtags \
+ -erroff=E_ASSIGN_NARROW_CONV \
+ -erroff=E_BAD_PTR_CAST \
+ -erroff=E_BAD_PTR_CAST_ALIGN \
+ -erroff=E_BAD_PTR_INT_COMBINATION \
+ -erroff=E_BAD_SIGN_EXTEND \
+ -erroff=E_BLOCK_DECL_UNUSED \
+ -erroff=E_CASE_FALLTHRU \
+ -erroff=E_CONSTANT_CONDITION \
+ -erroff=E_EQUALITY_NOT_ASSIGNMENT \
+ -erroff=E_EXPR_NULL_EFFECT \
+ -erroff=E_FALSE_LOGICAL_EXPR \
+ -erroff=E_INCL_NUSD \
+ -erroff=E_INDISTING_FROM_TRUNC \
+ -erroff=E_LOOP_EMPTY \
+ -erroff=E_MAIN_PARAM \
+ -erroff=E_POINTER_TO_OBJECT \
+ -erroff=E_PTRDIFF_OVERFLOW \
+ -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
+ -erroff=E_STATIC_UNUSED \
+ -erroff=E_TRUE_LOGICAL_EXPR
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
# levels of symbolic links, even if we have only two)
opmini.c: op.c
- \$(CPS) op.c opmini.tmp
- sh mv-if-diff opmini.tmp opmini.c
+ \$(RMS) opmini.c
+ \$(CPS) op.c opmini.c
opmini\$(OBJ_EXT): opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
- sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
- sh mv-if-diff writemain.tmp perlmain.c
+ sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
!NO!SUBS!
case "$osname" in
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
- ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp.tmp
- sh mv-if-diff perl.exp.tmp perl.exp
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
!NO!SUBS!
;;
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
- ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp.tmp
- sh mv-if-diff perl.exp.tmp perl5.def
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl.exp
!NO!SUBS!
;;
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
- valgrind ./perl -e 1 2>/dev/null || exit 1
+ $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
# Third Degree Perl (Tru64 only)
perl.config.dashg:
@echo "Checking optimize='-g' in config.sh..."
@grep "^optimize=" config.sh
- @grep "^optimize='-g'" config.sh >/dev/null || exit 1
+ @egrep "^optimize='(-g|.*-g[1-3].*)'" config.sh >/dev/null || exit 1
perl.third.config: config.sh
@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
-# Take care to avoid modifying lib/Config.pm without reason
-# (If trying to create a new port and having problems with the configpm script,
-# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-$(CONFIGPM): config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
- $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl configpm.tmp
- sh mv-if-diff configpm.tmp lib/Config.pm
+lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
+ $(LDLIBPTH) ./miniperl -Ilib configpm --heavy=lib/Config_heavy.pl lib/Config.pm
+
+$(CONFIGPM): lib/Config.pod
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
- $(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
- sh mv-if-diff minimod.tmp $@
- -touch lib/ExtUtils/Miniperl.pm
+ $(LDLIBPTH) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
- cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm
+ cp ext/re/re.pm lib/re.pm
$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
@-rm -f $@
touch uni.data
extra.pods: miniperl$(EXE_EXT)
- -@test -f extra.pods && rm -f `cat extra.pods`
+ -@test ! -f extra.pods || rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-@rm -f pod/perldelta.pod
- -@test -f pod/perl593delta.pod && cd pod && $(LNS) perl593delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+ -@test -f pod/perl594delta.pod && cd pod && $(LNS) perl594delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
+
extras.make: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: perl$(EXE_EXT)
- -@test -s extras.lst && PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
+ -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
# Eventually Configure could ask for some of these values.
install.html: all installhtml
-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
- $(LDLIBPTH) ./perl installhtml \
+ $(LDLIBPTH) ./perl installhtml \
--podroot=. --podpath=. --recurse \
- --htmldir=$(privlib)/html \
- --htmlroot=$(privlib)/html \
+ --htmldir=$(privlib)/html \
+ --htmlroot=$(privlib)/html \
--splithead=pod/perlipc \
--splititem=pod/perlfunc \
--libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
+ --ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
run_byacc:
@echo "run_byacc is obsolete; try 'make regen_perly' instead"
-# this outputs perly.act and perly.tab
+# this outputs perly.h, perly.act, perly.tab, madly.h, madly.act and madly.tab
regen_perly:
perl regen_perly.pl
+ perl regen_perly.pl madly.y
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
perly.h: perly.y
-@sh -c true
+# Similary for madly.
+madly.c: madly.y
+ -@sh -c true
+
+madly.h: madly.y
+ -@sh -c true
+
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+.PHONY: printconfig
+printconfig:
+ @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
+
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
distclean veryclean _verycleaner
-rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
-rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
+ -rm -f config.over
# Do not 'make _tidy' directly.
_tidy:
# Some systems do not support "?", so keep these files separate.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
- rm -f core *perl.core t/core t/*perl.core
+ rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
- rm -f $(private) lib/Config.pod
+ rm -f $(private)
rm -rf $(unidatafiles) $(unidatadirs)
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -rf .config
rm -f preload
rm -f testcompile compilelog
- rm -rf lib/Encode
+ rm -rf lib/Encode lib/Compress
+ rm -rf lib/IO/Compress lib/IO/Uncompress
+ rm -f lib/ExtUtils/ParseXS/t/XSTest.c
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
+ rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
-rmdir lib/B lib/Data
- -rmdir lib/Filter/Util lib/IO/Socket lib/IO
- -rmdir lib/List lib/MIME lib/Scalar lib/Sys
- -rmdir lib/threads lib/XS
+ -rmdir lib/Filter/Util lib/IO/Socket
+ -rmdir lib/List lib/MIME lib/Scalar lib/Sys
+ -rmdir lib/threads lib/XS lib/Hash
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
@$(LDLIBPTH) $(MAKE) _cleaner2
-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
-# The following lint has practically everything turned on. Unfortunately,
-# you have to wade through a lot of mumbo jumbo that can't be suppressed.
-# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
-# for that spot.
-
.PHONY: lint
lint: $(c)
- lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
+ rm -f *.ln
+ lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
PERL=./perl $(MAKE) _test_prep
test.valgrind check.valgrind: test_prep perl.valgrind.config
- PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 $(MAKE) _test
+ PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
-utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind
+utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
-test_notty.valgrind: test_prep.valgrind perl.valgrind
+test_notty.valgrind: test_prep.valgrind perl.valgrind.config
PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
# Targets for Third Degree testing.
perl emacs/e2ctags.pl TAGS > tags
ctags:
- ctags -f Tags --totals --languages=c --langmap=c:+.h *.c *.h
+ ctags -f Tags -N --totals --languages=c --langmap=c:+.h *.c *.h
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
;;
esac
+# ex: set ts=8 sts=4 sw=4 noet:
https://perl5.git.perl.org / perl5.git / blobdiff