case "$useshrplib" in
true)
# Prefix all runs of 'miniperl' and 'perl' with
- # $ldlibpth so that ./perl finds *this* libperl.so.
+ # $ldlibpth so that ./perl finds *this* shared libperl.
ldlibpth="LD_LIBRARY_PATH=`pwd`:$LD_LIBRARY_PATH"
pldlflags="$cccdlflags"
- # NeXT-4 specific stuff. Can't we do this in the hint file?
case "${osname}${osvers}" in
next4*)
ld=libtool
lddlflags="-dynamic -undefined warning -framework System \
-compatibility_version 1 -current_version $patchlevel \
-prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
- # NeXT uses a different name.
- ldlibpth="DYLD_LIBRARY_PATH=`pwd`:$DYLD_LIBRARY_PATH"
;;
- rhapsody*)
- ldlibpth="DYLD_LIBRARY_PATH=`pwd`/Perl:$DYLD_LIBRARY_PATH"
- ;;
- cygwin*) ldlibpth="PATH='`pwd`:$PATH'"
+ cygwin*)
linklibperl="-lperl"
;;
- os2*) # OS/2 doesn't need anything special for LD_LIBRARY_PATH.
- ldlibpth=''
- ;;
sunos*)
linklibperl="-lperl"
;;
esac
shrpldflags="$shrpldflags $ldflags $libs $cryptlib"
linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
- ldlibpth="LIBPATH=`pwd`:${LIBPATH}"
;;
hpux*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
- ldlibpth="SHLIB_PATH=`pwd`:${SHLIB_PATH}"
- ;;
- beos*) ldlibpth="LIBRARY_PATH=`pwd`:$LIBRARY_PATH"
;;
esac
+ case "$ldlibpthname" in
+ '') ;;
+ *)
+ case "$osname" in
+ os2)
+ ldlibpth=''
+ ;;
+ rhapsody)
+ eval "ldlibpth=\"$ldlibpthname=`pwd`/Perl:\$$ldlibpthname\""
+ ;;
+ *)
+ eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
+ ;;
+ esac
+ ;;
+ esac
;;
*) pldlflags=''
;;
SHRPENV = $shrpenv
# The following is used to include the current directory in
-# LD_LIBRARY_PATH if you are building a shared libperl.so.
+# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth
dynamic_ext = $dynamic_list
# how to tr(anslate) newlines
TRNL = '$trnl'
+# not used by Makefile but by installperl;
+# mentioned here so that metaconfig picks it up
+INSTALL_USR_BIN_PERL = $installusrbinperl
+
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
-h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
+h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
-h5 = utf8.h warning.h
+h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
-c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
+c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
+c4 = globals.c perlio.c perlapi.c
-c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
+c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
-all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext) $(nonxs_ext)
+all: $(FIRSTMAKEFILE) miniperl extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext)
@echo " ";
@echo " Everything is up to date. 'make test' to run test suite."
translators: miniperl lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl lib/Config.pm FORCE
+utilities: miniperl lib/Config.pm $(plextract) FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
FORCE:
@sh -c true
+opmini$(OBJ_EXT): op.c
+ $(CCCMD) $(PLDLFLAGS) -DPERL_EXTERNAL_GLOB -o opmini$(OBJ_EXT) op.c
+
miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
# Load up custom Makefile.SH fragment for shared loading and executables:
case "$osname" in
cygwin*)
- Makefile_s="cygwin32/Makefile.SHs"
+ Makefile_s="cygwin/Makefile.SHs"
;;
*)
Makefile_s="$osname/Makefile.SHs"
$(RMS) $(LIBPERL_NONSHR)
$(AR) rcu $(LIBPERL_NONSHR) perl$(OBJ_EXT) $(obj)
-$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT)
- $(CC) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
+$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
+ $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
+ opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
MINIPERLEXP = $(MINIPERL_NONSHR)
!NO!SUBS!
;;
+os2)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+MINIPERLEXP = miniperl
+
+perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
+ ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
+ sh mv-if-diff perl.exp.tmp perl5.def
+
+!NO!SUBS!
+ ;;
esac
if test -r $Makefile_s ; then
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.
-miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
- $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
- $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
+!NO!SUBS!
+
+ case "${osname}${osvers}" in
+ next4*)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+ $(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
+ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
+ $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+!NO!SUBS!
+ ;;
+ *)
+ $spitshell >>Makefile <<'!NO!SUBS!'
+miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
+ $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) -o miniperl \
+ miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
+ $(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
+!NO!SUBS!
+ ;;
+ esac
+
+ $spitshell >>Makefile <<'!NO!SUBS!'
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
-preplibrary: miniperl lib/Config.pm $(plextract)
+preplibrary: miniperl lib/Config.pm
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
-lib/Config.pm: config.sh miniperl configpm
+lib/Config.pm: config.sh miniperl configpm lib/re.pm
$(LDLIBPTH) ./miniperl configpm configpm.tmp
sh mv-if-diff configpm.tmp $@
rm -f $@
cat ext/re/re.pm > $@
-$(plextract): miniperl lib/Config.pm lib/re.pm
+$(plextract): miniperl lib/Config.pm
$(LDLIBPTH) ./miniperl -Ilib $@.PL
-
+
+extra.pods: miniperl
+ -@test -f extra.pods && rm -f `cat extra.pods`
+ -@rm -f extra.pods
+ -@for x in `grep -l '^=[a-z]' README.*` ; do \
+ nx=`echo $$x | sed -e "s/README\.//"`; \
+ $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
+ echo "pod/perl"$$nx".pod" >> extra.pods ; \
+ done
+
install: all install.perl install.man
install.perl: all installperl
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
- @ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
- chmod 664 perly.c
+ -chmod 664 perly.c
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
SYMH = perlvars.h intrpvar.h thrdvar.h
+CHMOD_W = chmod +w
+
# The following files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# ext/ByteLoader/byterun.h: bytecode.pl
# ext/ByteLoader/byterun.c: bytecode.pl
# ext/B/Asmdata.pm: bytecode.pl
+# global.sym: embed.pl
# regnodes.h: regcomp.pl
-# warning.h lib/warning.pm: warning.pl
+# warnings.h lib/warnings.pm: warnings.pl
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
# make regen_headers
regen_headers: FORCE
+ $(CHMOD_W) proto.h warnings.h lib/warnings.pm
perl keywords.pl
perl opcode.pl
perl embed.pl
perl bytecode.pl
perl regcomp.pl
- perl warning.pl
+ perl warnings.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
- rm -f perl.exp ext.libs
+ -@test -f extra.pods && rm -f `cat extra.pods`
+ -rm -f perl.exp ext.libs extra.pods
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
rm -f perl suidperl miniperl $(LIBPERL)
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
- rm -f *.orig */*.orig *~ */*~ core core.perl.*.? core.miniperl.*.? perl.core miniperl.core t/core t/core.perl.*.? t/perl.core t/tmp???? t/c t/perl so_locations t/nonexistent1 so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
+ rm -f *.orig */*.orig *~ */*~ core core.*perl.*.? *perl.core t/core t/core.perl.*.? t/*perl.core t/misctmp* t/tmp* t/c t/perl so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
https://perl5.git.perl.org / perl5.git / blobdiff