run (and build extensions, and - possibly - be built itself) under any
environment which can run EMX. The current list is DOS,
DOS-inside-OS/2, Win0.3*, Win0.95 and WinNT. Out of many perl flavors,
-only one works, see L<"perl_.exe">.
+only one works, see L</"F<perl_.exe>">.
Note that not all features of Perl are available under these
environments. This depends on the features the I<extender> - most
To run Perl on DPMI platforms one needs RSX runtime. This is
needed under DOS-inside-OS/2, Win0.3*, Win0.95 and WinNT (see
-L<"Other OSes">). RSX would not work with VCPI
+L</"Other OSes">). RSX would not work with VCPI
only, as EMX would, it requires DMPI.
Having RSX and the latest F<sh.exe> one gets a fully functional
pipes in between, and/or quoting of arguments), Perl uses an external
shell. With EMX port such shell should be named F<sh.exe>, and located
either in the wired-in-during-compile locations (usually F<F:/bin>),
-or in configurable location (see L<"PERL_SH_DIR">).
+or in configurable location (see L</"C<PERL_SH_DIR>">).
For best results use EMX pdksh. The standard binary (5.2.14 or later) runs
under DOS (with L</RSX>) as well, see
do).
Note however that to use some of these operators you need to have a
-sh-syntax shell installed (see L<"Pdksh">,
-L<"Frequently asked questions">), and perl should be able to find it
-(see L<"PERL_SH_DIR">).
+sh-syntax shell installed (see L</"Pdksh">,
+L</"Frequently asked questions">), and perl should be able to find it
+(see L</"C<PERL_SH_DIR>">).
The cases when the shell is used are:
=head2 C<``> and pipe-C<open> do not work under DOS.
-This may a variant of just L<"I cannot run external programs">, or a
+This may a variant of just L</"I cannot run external programs">, or a
deeper problem. Basically: you I<need> RSX (see L</Prerequisites>)
for these commands to work, and you may need a port of F<sh.exe> which
understands command arguments. One of such ports is listed in
L</Prerequisites> under RSX. Do not forget to set variable
-C<L<"PERL_SH_DIR">> as well.
+L</"C<PERL_SH_DIR>"> as well.
DPMI is required for RSX.
=item C<PERL_BADLANG>
may be needed if you change your codepage I<after> perl installation,
-and the new value is not supported by EMX. See L<"PERL_BADLANG">.
+and the new value is not supported by EMX. See L</"C<PERL_BADLANG>">.
=item C<PERL_BADFREE>
-see L<"PERL_BADFREE">.
+see L</"C<PERL_BADFREE>">.
=item F<Config.pm>
B<NOTE>. Because of a typo the binary installer of 5.00305
would install a variable C<PERL_SHPATH> into F<Config.sys>. Please
-remove this variable and put C<L</PERL_SH_DIR>> instead.
+remove this variable and put L</C<PERL_SH_DIR>> instead.
=head2 Manual binary installation
into F<perl.exe>, you do not need to change
anything. However, for perl to find the library if you use a different
path, you need to
-C<set PERLLIB_PREFIX> in F<Config.sys>, see L<"PERLLIB_PREFIX">.
+C<set PERLLIB_PREFIX> in F<Config.sys>, see L</"C<PERLLIB_PREFIX>">.
=item Additional Perl modules
require shell, like the commands using I<redirection> and I<shell
metacharacters>. It is also used instead of explicit F</bin/sh>.
-Set C<PERL_SH_DIR> (see L<"PERL_SH_DIR">) if you move F<sh.exe> from
+Set C<PERL_SH_DIR> (see L</"C<PERL_SH_DIR>">) if you move F<sh.exe> from
the above location.
B<Note.> It may be possible to use some other sh-compatible shell (untested).
The automatic and manual perl installation leave precompiled paths
inside perl executables. While these paths are overwriteable (see
-L<"PERLLIB_PREFIX">, L<"PERL_SH_DIR">), some people may prefer
+L</"C<PERLLIB_PREFIX>">, L</"C<PERL_SH_DIR>">), some people may prefer
binary editing of paths inside the executables/DLLs.
=head1 Accessing documentation
view perl ExtUtils::MakeMaker
(currently the last two may hit a wrong location, but this may improve
-soon). Under Win* see L<"SYNOPSIS">.
+soon). Under Win* see L</"SYNOPSIS">.
If you want to build the docs yourself, and have I<OS/2 toolkit>, run
C<prefix> means: where to install the resulting perl library. Giving
correct prefix you may avoid the need to specify C<PERLLIB_PREFIX>,
-see L<"PERLLIB_PREFIX">.
+see L</"C<PERLLIB_PREFIX>">.
I<Ignore the message about missing C<ln>, and about C<-c> option to
tr>. The latter is most probably already fixed, if you see it and can trace
=item A lot of C<bad free>
in database tests related to Berkeley DB. I<This should be fixed already.>
-If it persists, you may disable this warnings, see L<"PERL_BADFREE">.
+If it persists, you may disable this warnings, see L</"C<PERL_BADFREE>">.
=item Process terminated by SIGTERM/SIGINT
=head2 C<a.out>-style build
-Proceed as above, but make F<perl_.exe> (see L<"perl_.exe">) by
+Proceed as above, but make F<perl_.exe> (see L</"F<perl_.exe>">) by
make perl_
a new executable per XS extension.
Here is a possible workaround: create a toplevel F<Makefile.PL> in
-F<$CPANHOME/.cpan/build/> with contents being (compare with L<Making
+F<$CPANHOME/.cpan/build/> with contents being (compare with L</Making
executables with a custom collection of statically loaded extensions>)
use ExtUtils::MakeMaker;
to ignore the environment when setting the Perl-library search patch, etc.
If you fill comfortable with I<embedding> interface (see L<perlembed>), such
-things are easy to do repeating the steps outlined in L<Making
+things are easy to do repeating the steps outlined in L/<Making
executables with a custom collection of statically loaded extensions>, and
doing more comprehensive edits to main() of F<perlmain.c>. The people with
little desire to understand Perl can just rename main(), and do necessary
system qw(C:/emx.add/bin/bash.exe -x -c C:/emx/bin/foo.cmd bar baz)
One additional translation is performed: instead of F</bin/sh> Perl uses
-the hardwired-or-customized shell (see C<L<"PERL_SH_DIR">>).
+the hardwired-or-customized shell (see L</"C<PERL_SH_DIR>">).
The above search for "interpreter" is recursive: if F<bash> executable is not
found, but F<bash.btm> is found, Perl will investigate its first line etc.
The argument true means that a real message loop is going to be served.
OS2::MorphPM() returns the PM message queue handle as an integer.
-See L<"Centralized management of resources"> for additional details.
+See L</"Centralized management of resources"> for additional details.
=item C<OS2::Serve_Messages(force)>
handling exception mask: if no C<mask>, uses exception mask part of C<new>
only. If no C<new>, disables all the floating point exceptions.
-See L<"Misfeatures"> for details.
+See L</"Misfeatures"> for details.
=item C<OS2::DLLname([how [, \&xsub]])>
=item *
-See L<"Text-mode filehandles">.
+See L</"Text-mode filehandles">.
=item *
=item C<popen>
-C<my_popen> uses F<sh.exe> if shell is required, cf. L<"PERL_SH_DIR">.
+C<my_popen> uses F<sh.exe> if shell is required, cf. L</"C<PERL_SH_DIR>">.
=item C<tmpnam>
I<This is the only executable with does not require OS/2.> The
friends locked into C<M$> world would appreciate the fact that this
executable runs under DOS, Win0.3*, Win0.95 and WinNT with an
-appropriate extender. See L<"Other OSes">.
+appropriate extender. See L</"Other OSes">.
=head2 F<perl__.exe>
Due to a popular demand the perl external program calling has been
changed wrt Andreas Kaiser's port. I<If> perl needs to call an
external program I<via shell>, the F<f:/bin/sh.exe> will be called, or
-whatever is the override, see L<"PERL_SH_DIR">.
+whatever is the override, see L</"C<PERL_SH_DIR>">.
Thus means that you need to get some copy of a F<sh.exe> as well (I
use one from pdksh). The path F<F:/bin> above is set up automatically during
Note that OS2 perl defines 2 pseudo-extension functions
OS2::Copy::copy and DynaLoader::mod2fname (many more now, see
-L<Prebuilt methods>).
+L</Prebuilt methods>).
The -R switch of older perl is deprecated. If you need to call a REXX code
which needs access to variables, include the call into a REXX compartment
https://perl5.git.perl.org / perl5.git / blobdiff