(F) You passed an invalid number (like an infinity or not-a-number) to C<chr>.
+=item Cannot complete in-place edit of %s: %s
+
+(F) Your perl script appears to have changed directory while
+performing an in-place edit of a file specified by a relative path,
+and your system doesn't include the directory relative POSIX functions
+needed to handle that.
+
=item Cannot compress %f in pack
(F) You tried compressing an infinity or not-a-number as an unsigned
(S io) You tried to apply an encoding that did not exist to a filehandle,
either with open() or binmode().
+=item Cannot open %s as a dirhandle: it is already open as a filehandle
+
+(F) You tried to use opendir() to associate a dirhandle to a symbol (glob
+or scalar) that already holds a filehandle. Since this idiom might render
+your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it
+is a fatal error.
+
+=item Cannot open %s as a filehandle: it is already open as a dirhandle
+
+(F) You tried to use open() to associate a filehandle to a symbol (glob
+or scalar) that already holds a dirhandle. Since this idiom might render
+your code confusing, it was deprecated in Perl 5.10. As of Perl 5.28, it
+is a fatal error.
+
=item Cannot pack %f with '%c'
(F) You tried converting an infinity or not-a-number to an integer,
(P) An error peculiar to VMS. Perl asked $GETSYI how big you want your
mailbox buffers to be, and didn't get an answer.
+=item Can't "goto" into a binary or list expression
+
+(F) A "goto" statement was executed to jump into the middle of a binary
+or list expression. You can't get there from here. The reason for this
+restriction is that the interpreter would get confused as to how many
+arguments there are, resulting in stack corruption or crashes. This
+error occurs in cases such as these:
+
+ goto F;
+ print do { F: }; # Can't jump into the arguments to print
+
+ goto G;
+ $x + do { G: $y }; # How is + supposed to get its first operand?
+
+=item Can't "goto" into a "given" block
+
+(F) A "goto" statement was executed to jump into the middle of a C<given>
+block. You can't get there from here. See L<perlfunc/goto>.
+
=item Can't "goto" into the middle of a foreach loop
(F) A "goto" statement was executed to jump into the middle of a foreach
=item Can't modify non-lvalue subroutine call of &%s
+=item Can't modify non-lvalue subroutine call of &%s in %s
+
(F) Subroutines meant to be used in lvalue context should be declared as
such. See L<perlsub/"Lvalue subroutines">.
file. Perl was unable to remove the original file to replace it with
the modified file. The file was left unmodified.
+=item Can't rename in-place work file '%s' to '%s': %s
+
+(F) When closed implicitly, the temporary file for in-place editing
+couldn't be renamed to the original filename.
+
=item Can't rename %s to %s: %s, skipping file
-(S inplace) The rename done by the B<-i> switch failed for some reason,
+(F) The rename done by the B<-i> switch failed for some reason,
probably because you don't have write permission to the directory.
=item Can't reopen input pipe (name: %s) in binary mode
however, redefine it while it's running, and you can even undef the
redefined subroutine while the old routine is running. Go figure.
+=item Can't unweaken a nonreference
+
+(F) You attempted to unweaken something that was not a reference. Only
+references can be unweakened.
+
=item Can't upgrade %s (%d) to %d
(P) The internal sv_upgrade routine adds "members" to an SV, making it
unpack("s", "\x{f3}b")
-=item charnames alias definitions may not contain a sequence of multiple spaces
+=item charnames alias definitions may not contain a sequence of multiple
+spaces; marked by S<<-- HERE> in %s
(F) You defined a character name which had multiple space characters
in a row. Change them to single spaces. Usually these names are
could be defined by a translator installed into C<$^H{charnames}>. See
L<charnames/CUSTOM ALIASES>.
-=item charnames alias definitions may not contain trailing white-space
+=item charnames alias definitions may not contain trailing white-space;
+marked by S<<-- HERE> in %s
(F) You defined a character name which ended in a space
character. Remove the trailing space(s). Usually these names are
=item (Did you mean "local" instead of "our"?)
-(W misc) Remember that "our" does not localize the declared global
+(W shadow) Remember that "our" does not localize the declared global
variable. You have declared it again in the same lexical scope, which
seems superfluous.
described in L<perlunicode> and L<perlre>. You used C<\p> or C<\P> in
a regular expression without specifying the property name.
-=item ${^ENCODING} is no longer supported. Its use will be fatal in Perl 5.28
+=item ${^ENCODING} is no longer supported
-(D deprecated) The special variable C<${^ENCODING}>, formerly used to implement
+(F) The special variable C<${^ENCODING}>, formerly used to implement
the C<encoding> pragma, is no longer supported as of Perl 5.26.0.
-Setting this variable will become a fatal error in Perl 5.28.
+Setting it to anything other than C<undef> is a fatal error as of Perl
+5.28.
=item entering effective %s failed
L<C<(?I<PARNO>)>|perlre/(?PARNO) (?-PARNO) (?+PARNO) (?R) (?0)>,
but omitted the C<")">.
+=item Expecting close paren for nested extended charclass in regex; marked
+by <-- HERE in m/%s/
+
+(F) While parsing a nested extended character class like:
+
+ (?[ ... (?flags:(?[ ... ])) ... ])
+ ^
+
+we expected to see a close paren ')' (marked by ^) but did not.
+
+=item Expecting close paren for wrapper for nested extended charclass in
+regex; marked by <-- HERE in m/%s/
+
+(F) While parsing a nested extended character class like:
+
+ (?[ ... (?flags:(?[ ... ])) ... ])
+ ^
+
+we expected to see a close paren ')' (marked by ^) but did not.
+
=item Expecting '(?flags:(?[...' in regex; marked by S<<-- HERE> in m/%s/
(F) The C<(?[...])> extended character class regular expression construct
CHECK, INIT, or END subroutine. Processing of the remainder of the
queue of such routines has been prematurely ended.
-=item Failed to close in-place edit file %s: %s
+=item Failed to close in-place work file %s: %s
(F) Closing an output file from in-place editing, as with the C<-i>
command-line switch, failed.
class its behavior is not well defined. Check that the correct
escape has been used, and the correct charname handler is in scope.
-=item Illegal binary digit %s
+=item Illegal binary digit '%c'
(F) You used a digit other than 0 or 1 in a binary number.
(F) The number of bits in vec() (the third argument) must be a power of
two from 1 to 32 (or 64, if your platform supports that).
-=item Illegal octal digit %s
+=item Illegal octal digit '%c'
(F) You used an 8 or 9 in an octal number.
(W digit) You may have tried to use an 8 or 9 in an octal number.
Interpretation of the octal number stopped before the 8 or 9.
+=item Illegal operator following parameter in a subroutine signature
+
+(F) A parameter in a subroutine signature, was followed by something
+other than C<=> introducing a default, C<,> or C<)>.
+
+ use feature 'signatures';
+ sub foo ($=1) {} # legal
+ sub foo ($a = 1) {} # legal
+ sub foo ($a += 1) {} # illegal
+ sub foo ($a == 1) {} # illegal
+
=item Illegal pattern in regex; marked by S<<-- HERE> in m/%s/
(F) You wrote something like
text. You should check the pattern to ensure that recursive patterns
either consume text or fail.
-=item Initialization of state variables in list context currently forbidden
+=item Infinite recursion via empty pattern
+
+(F) You tried to use the empty pattern inside of a regex code block,
+for instance C</(?{ s!!! })/>, which resulted in re-executing
+the same pattern, which is an infinite loop which is broken by
+throwing an exception.
-(F) C<state> only permits initializing a single scalar variable, in scalar
-context. So C<state $a = 42> is allowed, but not C<state ($a) = 42>. To apply
-state semantics to a hash or array, store a hash or array reference in a
-scalar variable.
+=item Initialization of state variables in list currently forbidden
+
+(F) C<state> only permits initializing a single variable, specified
+without parentheses. So C<state $a = 42> and C<state @a = qw(a b c)> are
+allowed, but not C<state ($a) = 42> or C<(state $a) = 42>. To initialize
+more than one C<state> variable, initialize them one at a time.
=item %%s[%s] in scalar context better written as $%s[%s]
intervening between the C<"("> and the C<"?">, but you separated them
with whitespace.
+=item In '(*...)', the '(' and '*' must be adjacent in regex;
+marked by S<<-- HERE> in m/%s/
+
+(F) The two-character sequence C<"(*"> in this context in a regular
+expression pattern should be an indivisible token, with nothing
+intervening between the C<"("> and the C<"*">, but you separated them.
+Fix the pattern and retry.
+
=item Invalid %s attribute: %s
(F) The indicated attribute for a subroutine or variable was not recognized
=item In '(*VERB...)', the '(' and '*' must be adjacent in regex;
marked by S<<-- HERE> in m/%s/
-(F) The two-character sequence C<"(*"> in
-this context in a regular expression pattern should be an
-indivisible token, with nothing intervening between the C<"(">
-and the C<"*">, but you separated them.
+(F) The two-character sequence C<"(*"> in this context in a regular
+expression pattern should be an indivisible token, with nothing
+intervening between the C<"("> and the C<"*">, but you separated them.
=item ioctl is not implemented
(W regexp) (only under C<S<use re 'strict'>> or within C<(?[...])>)
-You specified a character that has the given plainer way of writing it,
-and which is also portable to platforms running with different character
-sets.
+You specified a character that has the given plainer way of writing it, and
+which is also portable to platforms running with different character sets.
=item $* is no longer supported. Its use will be fatal in Perl 5.30
form of C<open> does not support pipes, such as C<open($pipe, '|-', @args)>.
Use the two-argument C<open($pipe, '|prog arg1 arg2...')> form instead.
+=item Literal vertical space in [] is illegal except under /x in regex;
+marked by S<<-- HERE> in m/%s/
+
+(F) (only under C<S<use re 'strict'>> or within C<(?[...])>)
+
+Likely you forgot the C</x> modifier or there was a typo in the pattern.
+For example, did you really mean to match a form-feed? If so, all the
+ASCII vertical space control characters are representable by escape
+sequences which won't present such a jarring appearance as your pattern
+does when displayed.
+
+ \r carriage return
+ \f form feed
+ \n line feed
+ \cK vertical tab
+
=item %s: loadable library and perl binaries are mismatched (got handshake key %p, needed %p)
(P) A dynamic loading library C<.so> or C<.dll> was being loaded into the
said library was compiled against. Reinstalling the XS module will
likely fix this error.
+=item Locale '%s' contains (at least) the following characters which
+have non-standard meanings: %s The Perl program will use the standard
+meanings
+
+(W locale) You are using the named UTF-8 locale. UTF-8 locales are
+expected to adhere to the Unicode standard. This message arises when
+perl found some anomalies in the locale, and is notifying you that there
+are potential problems.
+
+The most common cause of this warning is that, contrary to the claims,
+Unicode is not completely locale insensitive. Turkish and some related
+languages have two types of C<"I"> characters. One is dotted in both
+upper- and lowercase, and the other is dotless in both cases. Unicode
+allows a locale to use either these rules, or the rules used in all
+other instances, where there is only one type of C<"I">, which is
+dotless in the uppercase, and dotted in the lower. The perl core does
+not (yet) handle the Turkish case, and this warns you of that. Instead,
+the L<Unicode::Casing> module allows you to mostly implement the Turkish
+casing rules.
+
+But there are other locales which are defective in not following the
+Unicode standard, and this message is raised if one of these is
+detected.
+
=item Locale '%s' may not work well.%s
(W locale) You are using the named locale, which is a non-UTF-8 one, and
the variable, C<%s>, part of the message.
One possible cause is that you set the UTF8 flag yourself for data that
-you thought to be in UTF-8 but it wasn't (it was for example legacy
-8-bit data). To guard against this, you can use C<Encode::decode('UTF-8', ...)>.
+you thought to be in UTF-8 but it wasn't (it was for example legacy 8-bit
+data). To guard against this, you can use C<Encode::decode('UTF-8', ...)>.
If you use the C<:encoding(UTF-8)> PerlIO layer for input, invalid byte
-sequences are handled gracefully, but if you use C<:utf8>, the flag is
-set without validating the data, possibly resulting in this error
-message.
+sequences are handled gracefully, but if you use C<:utf8>, the flag is set
+without validating the data, possibly resulting in this error message.
See also L<Encode/"Handling Malformed Data">.
(F) The charnames handler returned malformed UTF-8.
+=item Malformed UTF-8 string in "%s"
+
+(F) This message indicates a bug either in the Perl core or in XS
+code. Such code was trying to find out if a character, allegedly
+stored internally encoded as UTF-8, was of a given type, such as
+being punctuation or a digit. But the character was not encoded
+in legal UTF-8. The C<%s> is replaced by a string that can be used
+by knowledgeable people to determine what the type being checked
+against was.
+
+Passing malformed strings was deprecated in Perl 5.18, and
+became fatal in Perl 5.26.
+
=item Malformed UTF-8 string in '%c' format in unpack
(F) You tried to unpack something that didn't comply with UTF-8 encoding
(F) You tried to unpack something that didn't comply with UTF-8 encoding
rules and perl was unable to guess how to make more progress.
-=item Malformed UTF-8 string in "%s"
-
-(F) This message indicates a bug either in the Perl core or in XS
-code. Such code was trying to find out if a character, allegedly
-stored internally encoded as UTF-8, was of a given type, such as
-being punctuation or a digit. But the character was not encoded
-in legal UTF-8. The C<%s> is replaced by a string that can be used
-by knowledgeable people to determine what the type being checked
-against was.
-
-Passing malformed strings was deprecated in Perl 5.18, and
-became fatal in Perl 5.26.
-
=item Malformed UTF-16 surrogate
(F) Perl thought it was reading UTF-16 encoded character data but while
(S non_unicode) Perl allows strings to contain a superset of
Unicode code points; each code point may be as large as what is storable
-in an unsigned integer on your system, but these may not be accepted by
+in a signed integer on your system, but these may not be accepted by
other languages/systems. This message occurs when you matched a string
containing such a code point against a regular expression pattern, and
the code point was matched against a Unicode property, C<\p{...}> or
(W syntax) An underscore (underbar) in a numeric constant did not
separate two digits.
+=item Missing argument for %n in %s
+
+(F) A C<%n> was used in a format string with no corresponding argument for
+perl to write the current string length to.
+
=item Missing argument in %s
(W missing) You called a function with fewer arguments than other
redirection, and found a '>' or a '>>' on the command line, but can't
find the name of the file to which to write data destined for stdout.
+=item No package name allowed for subroutine %s in "our"
+
=item No package name allowed for variable %s in "our"
-(F) Fully qualified variable names are not allowed in "our"
-declarations, because that doesn't make much sense under existing
-rules. Such syntax is reserved for future extensions.
+(F) Fully qualified subroutine and variable names are not allowed in "our"
+declarations, because that doesn't make much sense under existing rules.
+Such syntax is reserved for future extensions.
=item No Perl script found in input
for I/O (in anticipation of future reads and to imitate the behavior
with real files).
+=item Old package separator used in string
+
+(W syntax) You used the old package separator, "'", in a variable
+named inside a double-quoted string; e.g., C<"In $name's house">. This
+is equivalent to C<"In $name::s house">. If you meant the former, put
+a backslash before the apostrophe (C<"In $name\'s house">).
+
=item %s() on unopened %s
(W unopened) An I/O operation was attempted on a filehandle that was
(S internal) An internal warning that the grammar is screwed up.
-=item Cannot open %s as a filehandle: it is already open as a dirhandle
-
-(F) You tried to use open() to associate a filehandle to
-a symbol (glob or scalar) that already holds a dirhandle.
-This idiom might render your code confusing
-and this was deprecated in Perl 5.10. As of Perl 5.28, this
-is a fatal error.
-
-=item Cannot open %s as a dirhandle: it is already open as a filehandle
-
-(F) You tried to use opendir() to associate a dirhandle to
-a symbol (glob or scalar) that already holds a filehandle.
-This idiom might render your code confusing
-and this was deprecated in Perl 5.10. As of Perl 5.28, this
-is a fatal error.
-
=item Operand with no preceding operator in regex; marked by S<<-- HERE> in
m/%s/
=item "our" variable %s redeclared
-(W misc) You seem to have already declared the same global once before
+(W shadow) You seem to have already declared the same global once before
in the current lexical scope.
=item Out of memory!
(W misc) You have attempted to weaken a reference that is already weak.
Doing so has no effect.
+=item Reference is not weak
+
+(W misc) You have attempted to unweaken a reference that is not weak.
+Doing so has no effect.
+
=item Reference to invalid group 0 in regex; marked by S<<-- HERE> in m/%s/
(F) You used C<\g0> or similar in a regular expression. You may refer
search list. So the additional elements in the replacement list
are meaningless.
+=item '(*%s' requires a terminating ':' in regex; marked by <-- HERE in m/%s/
+
+(F) You used a construct that needs a colon and pattern argument.
+Supply these or check that you are using the right construct.
+
=item '%s' resolved to '\o{%s}%d'
(W misc, regexp) You wrote something like C<\08>, or C<\179> in a
=item Setting $/ to a reference to %s is forbidden
-(F) You assigned a reference to a scalar to C<$/> where the
-referenced item is not a positive integer. In older perls this B<appeared>
-to work the same as setting it to C<undef> but was in fact internally
-different, less efficient and with very bad luck could have resulted in
-your file being split by a stringified form of the reference.
+(F) You assigned a reference to a scalar to C<$/> where the referenced item is
+not a positive integer. In older perls this B<appeared> to work the same as
+setting it to C<undef> but was in fact internally different, less efficient
+and with very bad luck could have resulted in your file being split by a
+stringified form of the reference.
In Perl 5.20.0 this was changed so that it would be B<exactly> the same as
-setting C<$/> to undef, with the exception that this warning would be
-thrown.
+setting C<$/> to undef, with the exception that this warning would be thrown.
-You are recommended to change your code to set C<$/> to C<undef> explicitly
-if you wish to slurp the file. As of Perl 5.28 assigning C<$/> to a
-reference to an integer which isn't positive is a fatal error.
+You are recommended to change your code to set C<$/> to C<undef> explicitly if
+you wish to slurp the file. As of Perl 5.28 assigning C<$/> to a reference
+to an integer which isn't positive is a fatal error.
=item Setting $/ to %s reference is forbidden
unnecessarily complex and unintuitive, and is very likely to be
overhauled.
-=item sort is now a reserved word
-
-(F) An ancient error message that almost nobody ever runs into anymore.
-But before sort was a keyword, people sometimes used it as a filehandle.
-
=item Sorry, hash keys must be smaller than 2**31 bytes
(F) You tried to create a hash containing a very large key, where "very
Perl doesn't yet handle such large hash keys. You should
reconsider your design to avoid hashing such a long string directly.
+=item sort is now a reserved word
+
+(F) An ancient error message that almost nobody ever runs into anymore.
+But before sort was a keyword, people sometimes used it as a filehandle.
+
=item Source filters apply only to byte streams
(F) You tried to activate a source filter (usually by loading a
=item "%s" subroutine &%s masks earlier declaration in same %s
-(W misc) A "my" or "state" subroutine has been redeclared in the
+(W shadow) A "my" or "state" subroutine has been redeclared in the
current scope or statement, effectively eliminating all access to
the previous instance. This is almost always a typographical error.
Note that the earlier subroutine will still exist until the end of
a perl4 interpreter, especially if the next 2 tokens are "use strict"
or "my $var" or "our $var".
-=item Syntax error in (?[...]) in regex m/%s/
+=item Syntax error in (?[...]) in regex; marked by <-- HERE in m/%s/
(F) Perl could not figure out what you meant inside this construct; this
notifies you that it is giving up trying.
This is to prevent the problem of one module changing the array base out
from under another module inadvertently. See L<perlvar/$[> and L<arybase>.
-=item The bitwise feature is experimental
-
-(S experimental::bitwise) This warning is emitted if you use bitwise
-operators (C<& | ^ ~ &. |. ^. ~.>) with the "bitwise" feature enabled.
-Simply suppress the warning if you want to use the feature, but know
-that in doing so you are taking the risk of using an experimental
-feature which may change or be removed in a future Perl version:
-
- no warnings "experimental::bitwise";
- use feature "bitwise";
- $x |.= $y;
-
=item The crypt() function is unimplemented due to excessive paranoia.
(F) Configure couldn't find the crypt() function on your machine,
(S experimental::regex_sets) This warning is emitted if you
use the syntax S<C<(?[ ])>> in a regular expression.
The details of this feature are subject to change.
-if you want to use it, but know that in doing so you
+If you want to use it, but know that in doing so you
are taking the risk of using an experimental feature which may
change in a future Perl version, you can do this to silence the
warning:
no warnings "experimental::regex_sets";
+=item The script_run feature is experimental
+
+(S experimental::script_run) This feature is experimental
+and its behavior may in any future release of perl. See
+L<perlre/Script Runs>.
+
=item The signatures feature is experimental
(S experimental::signatures) This warning is emitted if you unwrap a
=item Too few arguments for subroutine '%s'
-(F) A subroutine using a signature received too few arguments than
-required by the signature. The caller of the subroutine is presumably
-at fault.
+(F) A subroutine using a signature fewer arguments than required by the
+signature. The caller of the subroutine is presumably at fault.
-The message attempts to include the name of the called subroutine. If the
-subroutine has been aliased, the subroutine's original name will be shown,
-regardless of what name the caller used.
+The message attempts to include the name of the called subroutine. If
+the subroutine has been aliased, the subroutine's original name will be
+shown, regardless of what name the caller used.
=item Too late for "-%s" option
=item Too many arguments for subroutine '%s'
-(F) A subroutine using a signature received too many arguments than
-required by the signature. The caller of the subroutine is presumably
-at fault.
+(F) A subroutine using a signature received more arguments than permitted
+by the signature. The caller of the subroutine is presumably at fault.
The message attempts to include the name of the called subroutine. If the
subroutine has been aliased, the subroutine's original name will be shown,
=item Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.30), passed through in regex; marked by S<<-- HERE> in m/%s/
+=item Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.32), passed through in regex; marked by S<<-- HERE> in m/%s/
+
(D deprecated, regexp) The simple rule to remember, if you want to
match a literal C<{> character (U+007B C<LEFT CURLY BRACKET>) in a
regular expression pattern, is to escape each literal instance of it in
literal C<{> that should have raised a deprecation warning starting in
v5.20 did not warn until v5.26. By making the already-warned uses fatal
now, some of the planned extensions can be made to the language sooner.
-The cases which are still allowed will be fatal in Perl 5.30.
+The cases which are still allowed will be fatal in Perl 5.30 or 5.32.
The contexts where no warnings or errors are raised are:
be combined with the digits, or the C<"+"> shouldn't be there, or
something like that. Perl can't figure out what was intended.
+=item Unexpected ']' with no following ')' in (?[... in regex; marked by
+<-- HERE in m/%s/
+
+(F) While parsing an extended character class a ']' character was
+encountered at a point in the definition where the only legal use of
+']' is to close the character class definition as part of a '])', you
+may have forgotten the close paren, or otherwise confused the parser.
+
=item Unexpected '(' with no preceding operator in regex; marked by
S<<-- HERE> in m/%s/
also happen if the C<\N{}> is not in the scope of the corresponding
C<S<use charnames>>.
+=item Unknown '(*...)' construct '%s' in regex; marked by <-- HERE in m/%s/
+
+(F) The C<(*> was followed by something that the regular expression
+compiler does not recognize. Check your spelling.
+
=item Unknown error
(P) Perl was about to print an error message in C<$@>, but the C<$@> variable
did not exist, even after an attempt to create it.
+=item Unknown locale category %d; can't set it to %s
+
+(W locale) You used a locale category that perl doesn't recognize, so it
+cannot carry out your request. Check that you are using a valid
+category. If so, see L<perllocale/Multi-threaded> for advice on
+reporting this as a bug, and for modifying perl locally to accommodate
+your needs.
+
=item Unknown open() mode '%s'
(F) The second argument of 3-argument open() is not among the list
data Perl expected. Someone's very confused, or perhaps trying to
subvert Perl's population of %ENV for nefarious purposes.
-=item Unknown regex modifier "%s"
+=item Unknown regexp modifier "/%s"
(F) Alphanumerics immediately following the closing delimiter
of a regular expression pattern are interpreted by Perl as modifier
(F) Your machine doesn't support the Berkeley socket mechanism, or at
least that's what Configure thought.
+=item Unterminated '(*...' argument in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*...:...)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
=item Unterminated attribute list
(F) The lexer found something other than a simple identifier at the
compressed integer format and could not be converted to an integer.
See L<perlfunc/pack>.
+=item Unterminated '(*...' construct in regex; marked by <-- HERE in m/%s/
+
+(F) You used a pattern of the form C<(*...)> but did not terminate
+the pattern with a C<)>. Fix the pattern and retry.
+
=item Unterminated delimiter for here document
(F) This message occurs when a here document label has an initial
(F) The "use" keyword is recognized and executed at compile time, and
returns no useful value. See L<perlmod>.
-=item Use of assignment to $[ is deprecated
+=item Use of assignment to $[ is deprecated, and will be fatal in 5.30
(D deprecated) The C<$[> variable (index of the first element in an array)
-is deprecated. See L<perlvar/"$[">.
+is deprecated since Perl 5.12, and setting it to a non-zero value will be
+fatal as of Perl 5.30.
+See L<perlvar/"$[">.
=item Use of bare << to mean <<"" is forbidden
-(F) You are now required to use the explicitly quoted
-form if you wish to use an empty line as the terminator of the
-here-document.
+(F) You are now required to use the explicitly quoted form if you wish
+to use an empty line as the terminator of the here-document.
-Use of a bare terminator was deprecated in Perl 5.000, and
-is a fatal error as of Perl 5.28.
+Use of a bare terminator was deprecated in Perl 5.000, and is a fatal
+error as of Perl 5.28.
=item Use of /c modifier is meaningless in s///
use the /g modifier. Currently, /c is meaningful only when /g is
used. (This may change in the future.)
-=item Use of code point 0x%s is deprecated; the permissible max is 0x%s. This will be fatal in Perl 5.28
+=item Use of code point 0x%s is not allowed; the permissible max is 0x%s.
-(D deprecated) You used a code point that will not be allowed in a
-future perl version, because it is too large. Unicode only allows code
-points up to 0x10FFFF, but Perl allows much larger ones. However, the
-largest possible ones break the perl interpreter in some constructs,
-including causing it to hang in a few cases. The known problem areas
-are in C<tr///>, regular expression pattern matching using quantifiers,
-as quote delimiters in C<qI<X>...I<X>> (where I<X> is the C<chr()> of a large
-code point), and as the upper limits in loops.
-There may be other breakages as well. If you get this warning, and
-things aren't working correctly, you probably have found one of these.
+(F) You used a code point that is not allowed, because it is too large.
+Unicode only allows code points up to 0x10FFFF, but Perl allows much
+larger ones. Earlier versions of Perl allowed code points above IV_MAX
+(0x7FFFFFF on 32-bit platforms, 0x7FFFFFFFFFFFFFFF on 64-bit platforms),
+however, this could possibly break the perl interpreter in some constructs,
+including causing it to hang in a few cases.
If your code is to run on various platforms, keep in mind that the upper
limit depends on the platform. It is much larger on 64-bit word sizes
than 32-bit ones.
The use of out of range code points was deprecated in Perl 5.24, and
-it will be a fatal error in Perl 5.28.
-
-=item Use of comma-less variable list is deprecated. Its use will be fatal in Perl 5.28
-
-(D deprecated) The values you give to a format should be
-separated by commas, not just aligned on a line.
-
-This usage will be fatal in Perl 5.28.
+became a fatal error in Perl 5.28.
=item Use of each() on hash after insertion without resetting hash iterator results in undefined behavior
it may skip items, or visit items more than once. Consider using
C<keys()> instead of C<each()>.
-=item Infinite recursion via empty pattern
-
-(F) You tried to use the empty pattern inside of a regex code block,
-for instance C</(?{ s!!! })/>, which resulted in re-executing
-the same pattern, which is an infinite loop which is broken by
-throwing an exception.
-
=item Use of := for an empty attribute list is not allowed
(F) The construction C<my $x := 42> used to parse as equivalent to
This was deprecated in Perl 5.12.
-=item Use of inherited AUTOLOAD for non-method %s() is deprecated. This will be fatal in Perl 5.28
+=item Use of inherited AUTOLOAD for non-method %s::%s() is no longer allowed
-(D deprecated) As an (ahem) accidental feature, C<AUTOLOAD>
-subroutines are looked up as methods (using the C<@ISA> hierarchy)
-even when the subroutines to be autoloaded were called as plain
-functions (e.g. C<Foo::bar()>), not as methods (e.g. C<< Foo->bar() >> or
-C<< $obj->bar() >>).
+(F) As an accidental feature, C<AUTOLOAD> subroutines were looked up as
+methods (using the C<@ISA> hierarchy), even when the subroutines to be
+autoloaded were called as plain functions (e.g. C<Foo::bar()>), not as
+methods (e.g. C<< Foo->bar() >> or C<< $obj->bar() >>).
-This bug will be rectified in future by using method lookup only for
-methods' C<AUTOLOAD>s. However, there is a significant base of existing
-code that may be using the old behavior. So, as an interim step, Perl
-currently issues an optional warning when non-methods use inherited
-C<AUTOLOAD>s.
-
-The simple rule is: Inheritance will not work when autoloading
-non-methods. The simple fix for old code is: In any module that used
-to depend on inheriting C<AUTOLOAD> for non-methods from a base class
-named C<BaseClass>, execute C<*AUTOLOAD = \&BaseClass::AUTOLOAD> during
-startup.
-
-In code that currently says C<use AutoLoader; @ISA = qw(AutoLoader);>
-you should remove AutoLoader from @ISA and change C<use AutoLoader;> to
-C<use AutoLoader 'AUTOLOAD';>.
-
-This feature was deprecated in Perl 5.004, and will be fatal in Perl 5.28.
+This was deprecated in Perl 5.004, and was made fatal in Perl 5.28.
=item Use of %s in printf format not supported
however, because you can overload the numification and stringification
operators and then you presumably know what you are doing.
-=item Use of state $_ is experimental
-
-(S experimental::lexical_topic) Lexical $_ is an experimental feature and
-its behavior may change or even be removed in any future release of perl.
-See the explanation under L<perlvar/$_>.
-
=item Use of strings with code points over 0xFF as arguments to %s
-operator is deprecated. This will be a fatal error in Perl 5.28
+operator is not allowed
-(D deprecated) You tried to use one of the string bitwise operators
-(C<&> or C<|> or C<^> or C<~>) on a string containing a code point over
-0xFF. The string bitwise operators treat their operands as strings of
-bytes, and values beyond 0xFF are nonsensical in this context.
+(F) You tried to use one of the string bitwise operators (C<&> or C<|> or C<^> or
+C<~>) on a string containing a code point over 0xFF. The string bitwise
+operators treat their operands as strings of bytes, and values beyond
+0xFF are nonsensical in this context.
-Such usage will be a fatal error in Perl 5.28.
+This became fatal in Perl 5.28.
=item Use of strings with code points over 0xFF as arguments to C<vec>
is deprecated. This will be a fatal error in Perl 5.32
regex construct as a way to get the equivalent functionality. See
L<(?<=pattern) and \K in perlre|perlre/\K>.
-There are non-obvious Unicode rules under C</i> that can match variably,
-but which you might not think could. For example, the substring C<"ss">
-can match the single character LATIN SMALL LETTER SHARP S. There are
-other sequences of ASCII characters that can match single ligature
-characters, such as LATIN SMALL LIGATURE FFI matching C<qr/ffi/i>.
-Starting in Perl v5.16, if you only care about ASCII matches, adding the
-C</aa> modifier to the regex will exclude all these non-obvious matches,
-thus getting rid of this message. You can also say C<S<use re qw(/aa)>>
+Starting in Perl 5.18, there are non-obvious Unicode rules under C</i>
+that can match variably, but which you might not think could. For
+example, the substring C<"ss"> can match the single character LATIN
+SMALL LETTER SHARP S. Here's a complete list of the current ones
+affecting ASCII characters:
+
+ ASCII
+ sequence Matches single letter under /i
+ FF U+FB00 LATIN SMALL LIGATURE FF
+ FFI U+FB03 LATIN SMALL LIGATURE FFI
+ FFL U+FB04 LATIN SMALL LIGATURE FFL
+ FI U+FB01 LATIN SMALL LIGATURE FI
+ FL U+FB02 LATIN SMALL LIGATURE FL
+ SS U+00DF LATIN SMALL LETTER SHARP S
+ U+1E9E LATIN CAPITAL LETTER SHARP S
+ ST U+FB06 LATIN SMALL LIGATURE ST
+ U+FB05 LATIN SMALL LIGATURE LONG S T
+
+This list is subject to change, but is quite unlikely to.
+Each ASCII sequence can be any combination of upper- and lowercase.
+
+You can avoid this by using a bracketed character class in the
+lookbehind assertion, like
+
+ (?<![sS]t)
+ (?<![fF]f[iI])
+
+This fools Perl into not matching the ligatures.
+
+Another option for Perls starting with 5.16, if you only care about
+ASCII matches, is to add the C</aa> modifier to the regex. This will
+exclude all these non-obvious matches, thus getting rid of this message.
+You can also say
+
+ use if $] ge 5.016, re => '/aa';
+
to apply C</aa> to all regular expressions compiled within its scope.
See L<re>.
=item "%s" variable %s masks earlier declaration in same %s
-(W misc) A "my", "our" or "state" variable has been redeclared in the
+(W shadow) A "my", "our" or "state" variable has been redeclared in the
current scope or statement, effectively eliminating all access to the
previous instance. This is almost always a typographical error. Note
that the earlier variable will still exist until the end of the scope
(F) And you probably never will, because you probably don't have the
sources to your kernel, and your vendor probably doesn't give a rip
-about what you want. Your best bet is to put a setuid C wrapper around
-your script.
+about what you want. There is a vulnerability anywhere that you have a
+set-id script, and to close it you need to remove the set-id bit from
+the script that you're attempting to run. To actually run the script
+set-id, your best bet is to put a set-id C wrapper around your script.
=item You need to quote "%s"