/* perlvars.h
*
- * Copyright (C) 1999, 2000, 2001, 2002, by Larry Wall and others
+ * Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
+ * by Larry Wall and others
*
* You may distribute under the terms of either the GNU General Public
* License or the Artistic License, as specified in the README file.
*
*/
-/****************/
-/* Truly global */
-/****************/
+/*
+=head1 Global Variables
+*/
-/* Don't forget to re-run embed.pl to propagate changes! */
+/* Don't forget to re-run regen/embed.pl to propagate changes! */
/* This file describes the "global" variables used by perl
* This used to be in perl.h directly but we want to abstract out into
PERLVAR(Gthr_key, perl_key) /* key to retrieve per-thread struct */
#endif
-/* constants (these are not literals to facilitate pointer comparisons) */
-PERLVARIC(GYes, char *, "1")
-PERLVARIC(GNo, char *, "")
-PERLVARIC(Ghexdigit, char *, "0123456789abcdef0123456789ABCDEF")
-PERLVARIC(Gpatleave, char *, "\\.^$@dDwWsSbB+*?|()-nrtfeaxc0123456789[{]}")
+/* constants (these are not literals to facilitate pointer comparisons)
+ * (PERLVARISC really does create variables, despite its looks) */
+PERLVARISC(GYes, "1")
+PERLVARISC(GNo, "")
+PERLVARISC(Ghexdigit, "0123456789abcdef0123456789ABCDEF")
+PERLVARISC(Gpatleave, "\\.^$@dDwWsSbB+*?|()-nrtfeaxc0123456789[{]}")
/* XXX does anyone even use this? */
PERLVARI(Gdo_undump, bool, FALSE) /* -u or dump seen? */
PERLVAR(Gdollarzero_mutex, perl_mutex) /* Modifying $0 */
#endif
+
/* This is constant on most architectures, a global on OS/2 */
-PERLVARI(Gsh_path, char *, SH_PATH)/* full path of shell */
+#ifdef OS2
+# define PERL___C
+#else
+# define PERL___C const
+#endif
+PERLVARI(Gsh_path, PERL___C char *, SH_PATH) /* full path of shell */
+#undef PERL___C
#ifndef PERL_MICRO
/* If Perl has to ignore SIGPFE, this is its saved state.
PERLVAR(Gsv_placeholder, SV)
#ifndef PERL_MICRO
-PERLVARI(Gcsighandlerp, Sighandler_t, &Perl_csighandler) /* Pointer to C-level sighandler */
+PERLVARI(Gcsighandlerp, Sighandler_t, Perl_csighandler) /* Pointer to C-level sighandler */
#endif
#ifndef PERL_USE_SAFE_PUTENV
PERLVARI(Guse_safe_putenv, int, 1)
#endif
+
+#ifdef USE_PERLIO
+PERLVARI(Gperlio_fd_refcnt, int*, 0) /* Pointer to array of fd refcounts. */
+PERLVARI(Gperlio_fd_refcnt_size, int, 0) /* Size of the array */
+PERLVARI(Gperlio_debug_fd, int, 0) /* the fd to write perlio debug into, 0 means not set yet */
+#endif
+
+#ifdef HAS_MMAP
+PERLVARI(Gmmap_page_size, IV, 0)
+#endif
+
+#if defined(FAKE_PERSISTENT_SIGNAL_HANDLERS)||defined(FAKE_DEFAULT_SIGNAL_HANDLERS)
+PERLVARI(Gsig_handlers_initted, int, 0)
+#endif
+#ifdef FAKE_PERSISTENT_SIGNAL_HANDLERS
+PERLVARA(Gsig_ignoring, SIG_SIZE, int) /* which signals we are ignoring */
+#endif
+#ifdef FAKE_DEFAULT_SIGNAL_HANDLERS
+PERLVARA(Gsig_defaulting, SIG_SIZE, int)
+#endif
+
+/* XXX signals are process-wide anyway, so we
+ * ignore the implications of this for threading */
+#ifndef HAS_SIGACTION
+PERLVARI(Gsig_trapped, int, 0)
+#endif
+
+#ifdef DEBUGGING
+PERLVAR(Gwatch_pvx, char*)
+#endif
+
+#ifdef PERL_GLOBAL_STRUCT
+PERLVAR(Gppaddr, Perl_ppaddr_t*) /* or opcode.h */
+PERLVAR(Gcheck, Perl_check_t *) /* or opcode.h */
+PERLVARA(Gfold_locale, 256, unsigned char) /* or perl.h */
+PERLVARA(Gcharclass, 256, U32)
+#endif
+
+#ifdef PERL_NEED_APPCTX
+PERLVAR(Gappctx, void*) /* the application context */
+#endif
+
+PERLVAR(Gop_sequence, HV*) /* dump.c */
+PERLVARI(Gop_seq, UV, 0) /* dump.c */
+
+#if defined(HAS_TIMES) && defined(PERL_NEED_TIMESBASE)
+PERLVAR(Gtimesbase, struct tms)
+#endif
+
+/* allocate a unique index to every module that calls MY_CXT_INIT */
+
+#ifdef PERL_IMPLICIT_CONTEXT
+# ifdef USE_ITHREADS
+PERLVAR(Gmy_ctx_mutex, perl_mutex)
+# endif
+PERLVARI(Gmy_cxt_index, int, 0)
+#endif
+
+#if defined(USE_ITHREADS)
+PERLVAR(Ghints_mutex, perl_mutex) /* Mutex for refcounted he refcounting */
+#endif
+
+#if defined(USE_ITHREADS)
+PERLVAR(Gperlio_mutex, perl_mutex) /* Mutex for perlio fd refcounts */
+#endif
+
+/* this is currently set without MUTEX protection, so keep it a type which
+ * can be set atomically (ie not a bit field) */
+PERLVARI(Gveto_cleanup, int, FALSE) /* exit without cleanup */
+
+/* dummy variables that hold pointers to both runops functions, thus forcing
+ * them *both* to get linked in (useful for Peek.xs, debugging etc) */
+
+PERLVARI(Grunops_std, runops_proc_t, Perl_runops_standard)
+PERLVARI(Grunops_dbg, runops_proc_t, Perl_runops_debug)
+
+
+/* These are baked at compile time into any shared perl library.
+ In future 5.10.x releases this will allow us in main() to sanity test the
+ library we're linking against. */
+
+PERLVARI(Grevision, U8, PERL_REVISION)
+PERLVARI(Gversion, U8, PERL_VERSION)
+PERLVARI(Gsubversion, U8, PERL_SUBVERSION)
+
+#if defined(MULTIPLICITY)
+# define PERL_INTERPRETER_SIZE_UPTO_MEMBER(member) \
+ STRUCT_OFFSET(struct interpreter, member) + \
+ sizeof(((struct interpreter*)0)->member)
+
+/* These might be useful. */
+PERLVARI(Ginterp_size, U16, sizeof(struct interpreter))
+#if defined(PERL_GLOBAL_STRUCT)
+PERLVARI(Gglobal_struct_size, U16, sizeof(struct perl_vars))
+#endif
+
+/* This will be useful for subsequent releases, because this has to be the
+ same in your libperl as in main(), else you have a mismatch and must abort.
+*/
+PERLVARI(Ginterp_size_5_10_0, U16,
+ PERL_INTERPRETER_SIZE_UPTO_MEMBER(PERL_LAST_5_10_0_INTERP_MEMBER))
+#endif
+
+/*
+=for apidoc AmUx|Perl_keyword_plugin_t|PL_keyword_plugin
+
+Function pointer, pointing at a function used to handle extended keywords.
+The function should be declared as
+
+ int keyword_plugin_function(pTHX_
+ char *keyword_ptr, STRLEN keyword_len,
+ OP **op_ptr)
+
+The function is called from the tokeniser, whenever a possible keyword
+is seen. C<keyword_ptr> points at the word in the parser's input
+buffer, and C<keyword_len> gives its length; it is not null-terminated.
+The function is expected to examine the word, and possibly other state
+such as L<%^H|perlvar/%^H>, to decide whether it wants to handle it
+as an extended keyword. If it does not, the function should return
+C<KEYWORD_PLUGIN_DECLINE>, and the normal parser process will continue.
+
+If the function wants to handle the keyword, it first must
+parse anything following the keyword that is part of the syntax
+introduced by the keyword. See L</Lexer interface> for details.
+
+When a keyword is being handled, the plugin function must build
+a tree of C<OP> structures, representing the code that was parsed.
+The root of the tree must be stored in C<*op_ptr>. The function then
+returns a constant indicating the syntactic role of the construct that
+it has parsed: C<KEYWORD_PLUGIN_STMT> if it is a complete statement, or
+C<KEYWORD_PLUGIN_EXPR> if it is an expression. Note that a statement
+construct cannot be used inside an expression (except via C<do BLOCK>
+and similar), and an expression is not a complete statement (it requires
+at least a terminating semicolon).
+
+When a keyword is handled, the plugin function may also have
+(compile-time) side effects. It may modify C<%^H>, define functions, and
+so on. Typically, if side effects are the main purpose of a handler,
+it does not wish to generate any ops to be included in the normal
+compilation. In this case it is still required to supply an op tree,
+but it suffices to generate a single null op.
+
+That's how the C<*PL_keyword_plugin> function needs to behave overall.
+Conventionally, however, one does not completely replace the existing
+handler function. Instead, take a copy of C<PL_keyword_plugin> before
+assigning your own function pointer to it. Your handler function should
+look for keywords that it is interested in and handle those. Where it
+is not interested, it should call the saved plugin function, passing on
+the arguments it received. Thus C<PL_keyword_plugin> actually points
+at a chain of handler functions, all of which have an opportunity to
+handle keywords, and only the last function in the chain (built into
+the Perl core) will normally return C<KEYWORD_PLUGIN_DECLINE>.
+
+=cut
+*/
+
+PERLVARI(Gkeyword_plugin, Perl_keyword_plugin_t, Perl_keyword_plugin_standard)
https://perl5.git.perl.org / perl5.git / blobdiff