#
# Makefile to build perl on Windows NT using DMAKE.
# Supported compilers:
-# Visual C++ 2.0 through 6.0 (and possibly newer versions)
-# Borland C++ 5.02
-# Mingw32 with gcc-2.95.2 or better **experimental**
+# Visual C++ 2.0 through 7.0 (and possibly newer versions)
+# Borland C++ 5.02 or better
+# Mingw32 with gcc-2.95.2 or better
# MS Platform SDK 64-bit compiler and tools **experimental**
#
# This is set up to build a perl.exe that runs off a shared library
# versioned installation can be obtained by setting INST_TOP above to a
# path that includes an arbitrary version string.
#
-#INST_VER *= \5.9.3
+#INST_VER *= \5.9.4
#
# Comment this out if you DON'T want your perl installation to have
#CCTYPE *= MSVC20
# Visual C++ > 2.x and < 6.x
#CCTYPE *= MSVC
-# Visual C++ >= 6.x
+# Visual C++ 6.x (aka Visual Studio 98)
#CCTYPE *= MSVC60
+# Visual C++ Toolkit 2003 (free version of Visual C++ 7.x command-line tools)
+#CCTYPE *= MSVC70FREE
+# Visual C++ 7.x (aka Visual Studio .NET 2003) (full version)
+#CCTYPE *= MSVC70
# Borland 5.02 or later
#CCTYPE *= BORLAND
# MinGW with gcc-2.95.2 or later
# not be quoted)
#
.IF "$(CCTYPE)" == "BORLAND"
-CCHOME *= C:\borland\bcc55
+CCHOME *= C:\Borland\BCC55
.ELIF "$(CCTYPE)" == "GCC"
CCHOME *= C:\MinGW
.ELSE
#
# Additional compiler flags can be specified here.
#
+BUILDOPT *= $(BUILDOPTEXTRA)
#
# Adding -DPERL_HASH_SEED_EXPLICIT will disable randomization of Perl's
ARCHNAME !:= $(ARCHNAME)-thread
.ENDIF
-# Visual Studio 98 specific
-.IF "$(CCTYPE)" == "MSVC60"
-
-# VC 6.0 can load the socket dll on demand. Makes the test suite
-# run in about 10% less time.
+# Visual Studio 98 and .NET 2003 specific
+# VC++ 6.x and 7.x can load DLL's on demand. Makes the test suite run in
+# about 10% less time. (The free version of 7.x can't do this, however.)
+.IF "$(CCTYPE)" == "MSVC60" || "$(CCTYPE)" == "MSVC70"
DELAYLOAD *= -DELAYLOAD:ws2_32.dll -DELAYLOAD:shell32.dll delayimp.lib
-
-.IF "$(CFG)" == "Debug"
-.ELSE
-# VC 6.0 seems capable of compiling perl correctly with optimizations
-# enabled. Anything earlier fails tests.
-CFG *= Optimize
-.ENDIF
.ENDIF
ARCHDIR = ..\lib\$(ARCHNAME)
INST_LIB = $(INST_TOP)$(INST_VER)\lib
INST_ARCHLIB = $(INST_LIB)$(INST_ARCH)
INST_COREDIR = $(INST_ARCHLIB)\CORE
-INST_POD = $(INST_LIB)\pod
INST_HTML = $(INST_TOP)$(INST_VER)\html
#
.ENDIF
LIB32 = tlib /P128
IMPLIB = implib -c
-RSC = rc
+RSC = brcc32
#
# Options
CXX_FLAG = -P
LIBC = cw32mti.lib
-LIBFILES = $(CRYPT_LIB) import32.lib $(LIBC)
+
+# same libs as MSVC, except Borland doesn't have oldnames.lib
+LIBFILES = $(CRYPT_LIB) \
+ kernel32.lib user32.lib gdi32.lib winspool.lib \
+ comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib \
+ netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib \
+ version.lib odbc32.lib odbccp32.lib \
+ import32.lib $(LIBC)
.IF "$(CFG)" == "Debug"
OPTIMIZE = -v -D_RTLDLL -DDEBUGGING
LINK_DBG =
.ENDIF
+EXTRACFLAGS =
CFLAGS = -w -g0 -tWM -tWD $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
-LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
+LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)" \
+ -L"$(CCLIBDIR)\PSDK"
OBJOUT_FLAG = -o
EXEOUT_FLAG = -e
LIBOUT_FLAG =
-lmoldname -lkernel32 -luser32 -lgdi32 \
-lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 \
-loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr \
- -lwinmm -lversion -lodbc32
+ -lwinmm -lversion -lodbc32 -lodbccp32
.IF "$(CFG)" == "Debug"
OPTIMIZE = -g -O2 -DDEBUGGING
LINK_DBG = -s
.ENDIF
+EXTRACFLAGS =
CFLAGS = $(INCLUDES) $(DEFINES) $(LOCDEFS) $(OPTIMIZE)
LINK_FLAGS = $(LINK_DBG) -L"$(INST_COREDIR)" -L"$(CCLIBDIR)"
OBJOUT_FLAG = -o
OPTIMIZE += -Wp64 -Op
.ENDIF
+# the string-pooling option -Gf is deprecated in VC++ 7.x and will be removed
+# in later versions, so use read-only string-pooling (-GF) instead
+.IF "$(CCTYPE)" == "MSVC70FREE" || "$(CCTYPE)" == "MSVC70"
+STRPOOL = -GF
+.ELSE
+STRPOOL = -Gf
+.ENDIF
+
.IF "$(USE_PERLCRT)" != "define"
BUILDOPT += -DPERL_MSVCRT_READFIX
.ENDIF
# we add LIBC here, since we may be using PerlCRT.dll
LIBFILES = $(LIBBASEFILES) $(LIBC)
-CFLAGS = -nologo -Gf -W3 $(INCLUDES) $(DEFINES) $(LOCDEFS) \
+EXTRACFLAGS = -nologo $(STRPOOL) -W3
+CFLAGS = $(EXTRACFLAGS) $(INCLUDES) $(DEFINES) $(LOCDEFS) \
$(PCHFLAGS) $(OPTIMIZE)
LINK_FLAGS = -nologo -nodefaultlib $(LINK_DBG) \
-libpath:"$(INST_COREDIR)" \
# require backslashes to be doubled-up when written to $(mktmp) files.
# Other dmake's do not require this and would actually output a double
# backslash if they were doubled-up.
-.IF "$(shell type $(mktmp \\))"=="\\"
+.IF "$(shell @type $(mktmp \\))"=="\\"
B=\\
.ELSE
B=\\\
.ENDIF
+# There is a related issue with other escape sequences: Sarathy's old
+# dmake automatically maps escape sequences like \n to their ASCII values
+# when used in macros, while other dmake's only do so if this behaviour
+# is explicitly requested with the :m modifier.
+DONTUSETHIS=\n
+.IF "$(shell @type $(mktmp \n))"=="\n"
+N=$(DONTUSETHIS:m)
+.ELSE
+N=$(DONTUSETHIS)
+.ENDIF
+
o *= .obj
a *= .lib
..\utils\libnetcfg \
..\utils\enc2xs \
..\utils\piconv \
+ ..\utils\config_data \
..\utils\corelist \
..\utils\cpan \
..\utils\xsubpp \
..\utils\prove \
+ ..\utils\ptar \
+ ..\utils\ptardiff \
+ ..\utils\shasum \
..\utils\instmodsh \
..\pod\checkpods \
..\pod\pod2html \
PERLIMPLIB *= ..\perl59$(a)
PERLDLL = ..\perl59.dll
-XCOPY = xcopy /f /r /i /d
-RCOPY = xcopy /f /r /i /e /d
+XCOPY = xcopy /f /r /i /d /y
+RCOPY = xcopy /f /r /i /e /d /y
NOOP = @rem
#
..\gv.c \
..\hv.c \
..\locale.c \
+ ..\mathoms.c \
..\mg.c \
..\numeric.c \
..\op.c \
DYNAMIC_EXT = Socket IO Fcntl Opcode SDBM_File POSIX attrs Thread B re \
Data/Dumper Devel/Peek ByteLoader Devel/DProf File/Glob \
Sys/Hostname Storable Filter/Util/Call Encode \
- Digest/MD5 PerlIO/scalar MIME/Base64 Time/HiRes \
- Unicode/Normalize I18N/Langinfo Math/BigInt/FastCalc Win32
+ Digest/MD5 Digest/SHA PerlIO/scalar MIME/Base64 Time/HiRes \
+ Unicode/Normalize Math/BigInt/FastCalc Compress/Zlib Win32
STATIC_EXT =
NONXS_EXT = Errno
DYNALOADER = $(EXTDIR)\DynaLoader\DynaLoader
-POD2HTML = $(PODDIR)\pod2html
-POD2MAN = $(PODDIR)\pod2man
-POD2LATEX = $(PODDIR)\pod2latex
-POD2TEXT = $(PODDIR)\pod2text
-
# vars must be separated by "\t+~\t+", since we're using the tempfile
# version of config_sh.pl (we were overflowing someone's buffer by
# trying to fit them all on the command line)
archname=$(ARCHNAME) ~ \
cc=$(CC) ~ \
ld=$(LINK32) ~ \
- ccflags=$(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
+ ccflags=$(EXTRACFLAGS) $(OPTIMIZE) $(DEFINES) $(BUILDOPT) ~ \
cf_email=$(EMAIL) ~ \
d_crypt=$(D_CRYPT) ~ \
d_mymalloc=$(PERL_MALLOC) ~ \
RIGHTMAKE =
.ENDIF
+.IMPORT .IGNORE : SystemRoot windir
+
+# Don't just .IMPORT OS from the environment because dmake sets OS itself.
+ENV_OS=$(subst,OS=, $(shell @set OS))
+
+.IF "$(ENV_OS)" == "Windows_NT"
+ODBCCP32_DLL = $(SystemRoot)\system32\odbccp32.dll
+.ELSE
+ODBCCP32_DLL = $(windir)\system\odbccp32.dll
+.ENDIF
+
#
# Top targets
#
$(MINIPERL) : $(MINIDIR) $(MINI_OBJ) $(CRTIPMLIBS)
.IF "$(CCTYPE)" == "BORLAND"
+ if not exist $(CCLIBDIR)\PSDK\odbccp32.lib \
+ cd $(CCLIBDIR)\PSDK && implib odbccp32.lib $(ODBCCP32_DLL)
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
@$(mktmp c0x32$(o) $(MINI_OBJ:s,\,$B,),$(@:s,\,$B,),,$(LIBFILES),)
.ELIF "$(CCTYPE)" == "GCC"
perllib$(o) : perllib.c .\perlhost.h .\vdir.h .\vmem.h
.IF "$(USE_IMP_SYS)" == "define"
- $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(CXX_FLAG) $(OBJOUT_FLAG)$@ perllib.c
.ELSE
- $(CC) -c -I. -DWITH_STATIC $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
+ $(CC) -c -I. $(CFLAGS_O) $(OBJOUT_FLAG)$@ perllib.c
.ENDIF
# 1. we don't want to rebuild miniperl.exe when config.h changes
$(PERLDLL): perldll.def $(PERLDLL_OBJ) $(PERLDLL_RES) Extensions_static
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpd -ap $(BLINK_FLAGS) \
- @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)\n \
- $@,\n \
- $(LIBFILES)\n \
- perldll.def\n)
+ @$(mktmp c0d32$(o) $(PERLDLL_OBJ:s,\,$B,)$N \
+ $@,$N \
+ $(subst,\,$B $(shell @type Extensions_static)) $(LIBFILES)$N \
+ perldll.def$N)
$(IMPLIB) $*.lib $@
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mdll -o $@ -Wl,--base-file -Wl,perl.base $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
$(LIBFILES) $(LKPOST))
dlltool --output-lib $(PERLIMPLIB) \
--dllname $(PERLDLL:b).dll \
--output-exp perl.exp
$(LINK32) -mdll -o $@ $(BLINK_FLAGS) \
$(mktmp $(LKPRE) $(PERLDLL_OBJ:s,\,$B,) \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
+ $(subst,\,$B $(shell @type Extensions_static)) \
$(LIBFILES) perl.exp $(LKPOST))
.ELSE
$(LINK32) -dll -def:perldll.def -out:$@ \
- $(shell $(MINIPERL) -I..\lib buildext.pl --list-static-libs) \
+ @Extensions_static \
@$(mktmp -base:0x28000000 $(BLINK_FLAGS) $(DELAYLOAD) $(LIBFILES) \
$(PERLDLL_RES) $(PERLDLL_OBJ:s,\,$B,))
.ENDIF
$(PERLEXE): $(PERLDLL) $(CONFIGPM) $(PERLEXE_OBJ) $(PERLEXE_RES)
.IF "$(CCTYPE)" == "BORLAND"
$(LINK32) -Tpe -ap $(BLINK_FLAGS) \
- @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)\n \
- $(@:s,\,$B,),\n \
- $(PERLIMPLIB) $(LIBFILES)\n)
+ @$(mktmp c0x32$(o) $(PERLEXE_OBJ:s,\,$B,)$N \
+ $(@:s,\,$B,),$N \
+ $(PERLIMPLIB) $(LIBFILES)$N)
.ELIF "$(CCTYPE)" == "GCC"
$(LINK32) -mconsole -o $@ $(BLINK_FLAGS) \
$(PERLEXE_OBJ) $(PERLIMPLIB) $(LIBFILES)
$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
copy dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
Extensions : buildext.pl $(PERLDEP) $(CONFIGPM)
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --dynamic
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --dynamic
Extensions_static : buildext.pl
- $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
$(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) --static
-
-# Note: The next two targets explicitly remove a "blibdirs.exists" file that
-# currerntly gets left behind, until CPAN RT Ticket #5616 is resolved.
+ $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext --static
+ $(MINIPERL) -I..\lib buildext.pl --list-static-libs > Extensions_static
Extensions_clean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) clean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext clean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
Extensions_realclean :
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) $(EXTDIR) realclean
-if exist $(MINIPERL) $(MINIPERL) -I..\lib buildext.pl $(MAKE) $(PERLDEP) ext realclean
- -if exist $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists del /f $(EXTDIR)\SDBM_File\sdbm\blibdirs.exists
-#----------------------------------------------------------------------------------
+#-------------------------------------------------------------------------------
doc: $(PERLEXE)
copy ..\README.irix ..\pod\perlirix.pod
copy ..\README.jp ..\pod\perljp.pod
copy ..\README.ko ..\pod\perlko.pod
+ copy ..\README.linux ..\pod\perllinux.pod
copy ..\README.machten ..\pod\perlmachten.pod
copy ..\README.macos ..\pod\perlmacos.pod
copy ..\README.macosx ..\pod\perlmacosx.pod
copy ..\README.mint ..\pod\perlmint.pod
copy ..\README.mpeix ..\pod\perlmpeix.pod
copy ..\README.netware ..\pod\perlnetware.pod
+ copy ..\README.openbsd ..\pod\perlopenbsd.pod
copy ..\README.os2 ..\pod\perlos2.pod
copy ..\README.os390 ..\pod\perlos390.pod
copy ..\README.os400 ..\pod\perlos400.pod
copy ..\README.plan9 ..\pod\perlplan9.pod
copy ..\README.qnx ..\pod\perlqnx.pod
copy ..\README.solaris ..\pod\perlsolaris.pod
+ copy ..\README.symbian ..\pod\perlsymbian.pod
copy ..\README.tru64 ..\pod\perltru64.pod
copy ..\README.tw ..\pod\perltw.pod
copy ..\README.uts ..\pod\perluts.pod
copy ..\README.vms ..\pod\perlvms.pod
copy ..\README.vos ..\pod\perlvos.pod
copy ..\README.win32 ..\pod\perlwin32.pod
- copy ..\pod\perl593delta.pod ..\pod\perldelta.pod
+ copy ..\pod\perl594delta.pod ..\pod\perldelta.pod
cd ..\pod && $(MAKE) -f ..\win32\pod.mak converters
cd ..\lib && $(PERLEXE) lib_pm.PL
$(PERLEXE) $(PL2BAT) $(UTILS)
# Note that the pod cleanup in this next section is parsed (and regenerated
# by pod/buildtoc so please check that script before making changes here
-# the doubled rmdir calls are needed because older cmd shells
-# don't understand /q
distclean: realclean
-del /f $(MINIPERL) $(PERLEXE) $(PERLDLL) $(GLOBEXE) \
$(PERLIMPLIB) ..\miniperl$(a) $(MINIMOD)
-del /f $(LIBDIR)\File\Glob.pm
-del /f $(LIBDIR)\Storable.pm
-del /f $(LIBDIR)\Digest\MD5.pm
+ -del /f $(LIBDIR)\Digest\SHA.pm
-del /f $(LIBDIR)\PerlIO\encoding.pm
-del /f $(LIBDIR)\PerlIO\scalar.pm
-del /f $(LIBDIR)\PerlIO\via.pm
-del /f $(LIBDIR)\threads\shared.pm
-del /f $(LIBDIR)\Time\HiRes.pm
-del /f $(LIBDIR)\Unicode\Normalize.pm
- -del /f $(LIBDIR)\I18N\Langinfo.pm
-del /f $(LIBDIR)\Math\BigInt\FastCalc.pm
-del /f $(LIBDIR)\Win32.pm
- -if exist $(LIBDIR)\IO rmdir /s /q $(LIBDIR)\IO
- -if exist $(LIBDIR)\IO rmdir /s $(LIBDIR)\IO
-if exist $(LIBDIR)\B rmdir /s /q $(LIBDIR)\B
- -if exist $(LIBDIR)\B rmdir /s $(LIBDIR)\B
+ -if exist $(LIBDIR)\Compress rmdir /s /q $(LIBDIR)\Compress
-if exist $(LIBDIR)\Data rmdir /s /q $(LIBDIR)\Data
- -if exist $(LIBDIR)\Data rmdir /s $(LIBDIR)\Data
-if exist $(LIBDIR)\Encode rmdir /s /q $(LIBDIR)\Encode
- -if exist $(LIBDIR)\Encode rmdir /s $(LIBDIR)\Encode
-if exist $(LIBDIR)\Filter\Util rmdir /s /q $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\Filter\Util rmdir /s $(LIBDIR)\Filter\Util
- -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
- -if exist $(LIBDIR)\MIME rmdir /s $(LIBDIR)\MIME
+ -if exist $(LIBDIR)\Hash rmdir /s /q $(LIBDIR)\Hash
+ -if exist $(LIBDIR)\IO\Compress rmdir /s /q $(LIBDIR)\IO\Compress
+ -if exist $(LIBDIR)\IO\Socket rmdir /s /q $(LIBDIR)\IO\Socket
+ -if exist $(LIBDIR)\IO\Uncompress rmdir /s /q $(LIBDIR)\IO\Uncompress
-if exist $(LIBDIR)\List rmdir /s /q $(LIBDIR)\List
- -if exist $(LIBDIR)\List rmdir /s $(LIBDIR)\List
+ -if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-if exist $(LIBDIR)\Scalar rmdir /s /q $(LIBDIR)\Scalar
- -if exist $(LIBDIR)\Scalar rmdir /s $(LIBDIR)\Scalar
-if exist $(LIBDIR)\Sys rmdir /s /q $(LIBDIR)\Sys
- -if exist $(LIBDIR)\Sys rmdir /s $(LIBDIR)\Sys
-if exist $(LIBDIR)\threads rmdir /s /q $(LIBDIR)\threads
- -if exist $(LIBDIR)\threads rmdir /s $(LIBDIR)\threads
-if exist $(LIBDIR)\XS rmdir /s /q $(LIBDIR)\XS
- -if exist $(LIBDIR)\XS rmdir /s $(LIBDIR)\XS
-cd $(PODDIR) && del /f *.html *.bat checkpods \
perlaix.pod perlamiga.pod perlapollo.pod perlbeos.pod \
perlbs2000.pod perlce.pod perlcn.pod perlcygwin.pod \
perldelta.pod perldgux.pod perldos.pod perlepoc.pod \
perlfreebsd.pod perlhpux.pod perlhurd.pod perlirix.pod \
- perljp.pod perlko.pod perlmachten.pod perlmacos.pod \
- perlmacosx.pod perlmint.pod perlmpeix.pod perlnetware.pod \
- perlos2.pod perlos390.pod perlos400.pod perlplan9.pod \
- perlqnx.pod perlsolaris.pod perltru64.pod perltw.pod \
- perluts.pod perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod \
- perlwin32.pod \
+ perljp.pod perlko.pod perllinux.pod perlmachten.pod \
+ perlmacos.pod perlmacosx.pod perlmint.pod perlmpeix.pod \
+ perlnetware.pod perlopenbsd.pod perlos2.pod perlos390.pod \
+ perlos400.pod perlplan9.pod perlqnx.pod perlsolaris.pod \
+ perlsymbian.pod perltru64.pod perltw.pod perluts.pod \
+ perlvmesa.pod perlvms.pod perlvms.pod perlvos.pod perlwin32.pod \
pod2html pod2latex pod2man pod2text pod2usage \
podchecker podselect
-cd ..\utils && del /f h2ph splain perlbug pl2pm c2ph pstruct h2xs \
perldoc perlivp dprofpp perlcc libnetcfg enc2xs piconv cpan *.bat \
- xsubpp instmodsh prove corelist
+ xsubpp instmodsh prove ptar ptardiff shasum corelist config_data
-cd ..\x2p && del /f find2perl s2p psed *.bat
-del /f ..\config.sh ..\splittree.pl perlmain.c dlutils.c config.h.new
-del /f $(CONFIGPM)
-del /f bin\*.bat
-del /f perllibst.h
-del /f $(PERLEXE_ICO) perl.base
- -cd .. && del /s *$(a) *.map *.pdb *.ilk *.bs *$(o) .exists pm_to_blib
+ -cd .. && del /s *$(a) *.map *.pdb *.ilk *.tds *.bs *$(o) .exists pm_to_blib
-cd $(EXTDIR) && del /s *.def Makefile Makefile.old
-if exist $(AUTODIR) rmdir /s /q $(AUTODIR)
- -if exist $(AUTODIR) rmdir /s $(AUTODIR)
-if exist $(COREDIR) rmdir /s /q $(COREDIR)
- -if exist $(COREDIR) rmdir /s $(COREDIR)
install : all installbare installhtml
.ENDIF
cd ..\t && $(PERLEXE) -I..\lib harness $(TEST_SWITCHES) $(TEST_FILES)
-# the doubled rmdir calls are needed because older cmd shells
-# don't understand /q
_clean :
-@erase miniperlmain$(o)
-@erase $(MINIPERL)
-@erase $(PERLDLL)
-@erase $(CORE_OBJ)
-if exist $(MINIDIR) rmdir /s /q $(MINIDIR)
- -if exist $(MINIDIR) rmdir /s $(MINIDIR)
-if exist $(UNIDATADIR1) rmdir /s /q $(UNIDATADIR1)
- -if exist $(UNIDATADIR1) rmdir /s $(UNIDATADIR1)
-if exist $(UNIDATADIR2) rmdir /s /q $(UNIDATADIR2)
- -if exist $(UNIDATADIR2) rmdir /s $(UNIDATADIR2)
-@erase $(UNIDATAFILES)
-@erase $(WIN32_OBJ)
-@erase $(DLL_OBJ)
-@erase ..\x2p\*.exe ..\x2p\*.bat
-@erase *.ilk
-@erase *.pdb
+ -@erase *.tds
+ -@erase Extensions_static
clean : Extensions_clean _clean
https://perl5.git.perl.org / perl5.git / blobdiff