=head1 NAME
-perldelta - what is new for perl v5.25.0
+[ this is a template for a new perldelta file. Any text flagged as XXX needs
+to be processed before release. ]
+
+perldelta - what is new for perl v5.25.2
=head1 DESCRIPTION
-This document describes differences between the 5.24.0 release and the 5.25.0
+This document describes differences between the 5.25.1 release and the 5.25.2
release.
-=head1 Changes Since v5.24.0
+If you are upgrading from an earlier release such as 5.25.0, first read
+L<perl5251delta>, which describes differences between 5.25.0 and 5.25.1.
-None, really. The version number is a little bit higher, though.
+=head1 Notice
-=head1 Acknowledgements
+XXX Any important notices here
+
+=head1 Core Enhancements
+
+XXX New core language features go here. Summarize user-visible core language
+enhancements. Particularly prominent performance optimisations could go
+here, but most should go in the L</Performance Enhancements> section.
+
+[ List each enhancement as a =head2 entry ]
+
+=head2 Perl can now do default collation in UTF-8 locales on platforms
+that support it
+
+Some platforms natively do a reasonable job of collating and sorting in
+UTF-8 locales. Perl now works with those. For portability and full
+control, L<Unicode::Collate> is still recommended, but now you may
+not need to do anything special to get good-enough results, depending on
+your application. See
+L<perllocale/Category C<LC_COLLATE>: Collation: Text Comparisons and Sorting>
+
+=head2 Better locale collation of strings containing embedded C<NUL>
+characters
+
+In locales that have multi-level character weights, these are now
+ignored at the higher priority ones. There are still some gotchas in
+some strings, though. See
+L<perllocale/Collation of strings containing embedded C<NUL> characters>.
+
+=head1 Security
+
+XXX Any security-related notices go here. In particular, any security
+vulnerabilities closed should be noted here rather than in the
+L</Selected Bug Fixes> section.
+
+[ List each security issue as a =head2 entry ]
+
+=head2 C<-Di> switch is now required for PerlIO debugging output
+
+Previously PerlIO debugging output would be sent to the file specified
+by the C<PERLIO_DEBUG> environment variable if perl wasn't running
+setuid and the C<-T> or C<-t> switches hadn't been parsed yet.
+
+If perl performed output at a point where it hadn't yet parsed its
+switches this could result in perl creating or overwriting the file
+named by C<PERLIO_DEBUG> even when the C<-T> switch had been supplied.
+
+Perl now requires the C<-Di> switch to produce PerlIO debugging
+output. By default this is written to C<stderr>, but can optionally
+be redirected to a file by setting the C<PERLIO_DEBUG> environment
+variable.
+
+If perl is running setuid or the C<-T> switch has supplied
+C<PERLIO_DEBUG> is ignored and the debugging output is sent to
+C<stderr> as for any other C<-D> switch.
+
+=head1 Incompatible Changes
+
+XXX For a release on a stable branch, this section aspires to be:
+
+ There are no changes intentionally incompatible with 5.XXX.XXX
+ If any exist, they are bugs, and we request that you submit a
+ report. See L</Reporting Bugs> below.
+
+[ List each incompatible change as a =head2 entry ]
+
+=head1 Deprecations
+
+XXX Any deprecated features, syntax, modules etc. should be listed here.
+
+=head2 Module removals
+
+XXX Remove this section if inapplicable.
+
+The following modules will be removed from the core distribution in a
+future release, and will at that time need to be installed from CPAN.
+Distributions on CPAN which require these modules will need to list them as
+prerequisites.
+
+The core versions of these modules will now issue C<"deprecated">-category
+warnings to alert you to this fact. To silence these deprecation warnings,
+install the modules in question from CPAN.
+
+Note that these are (with rare exceptions) fine modules that you are encouraged
+to continue to use. Their disinclusion from core primarily hinges on their
+necessity to bootstrapping a fully functional, CPAN-capable Perl installation,
+not usually on concerns over their design.
+
+=over
+
+=item XXX
+
+XXX Note that deprecated modules should be listed here even if they are listed
+as an updated module in the L</Modules and Pragmata> section.
+
+=back
+
+[ List each other deprecation as a =head2 entry ]
+
+=head1 Performance Enhancements
+
+XXX Changes which enhance performance without changing behaviour go here.
+There may well be none in a stable release.
+
+[ List each enhancement as a =item entry ]
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head1 Modules and Pragmata
+
+XXX All changes to installed files in F<cpan/>, F<dist/>, F<ext/> and F<lib/>
+go here. If Module::CoreList is updated, generate an initial draft of the
+following sections using F<Porting/corelist-perldelta.pl>. A paragraph summary
+for important changes should then be added by hand. In an ideal world,
+dual-life modules would have a F<Changes> file that could be cribbed.
+
+[ Within each section, list entries as a =item entry ]
+
+=head2 New Modules and Pragmata
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head2 Updated Modules and Pragmata
+
+=over 4
+
+=item *
+
+L<XXX> has been upgraded from version A.xx to B.yy.
+
+=item *
+
+L<Module::CoreList> has been upgraded from 5.20160520 to 5.20160620.
+
+=back
+
+=head2 Removed Modules and Pragmata
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head1 Documentation
+
+XXX Changes to files in F<pod/> go here. Consider grouping entries by
+file and be sure to link to the appropriate page, e.g. L<perlfunc>.
+
+=head2 New Documentation
+
+XXX Changes which create B<new> files in F<pod/> go here.
+
+=head3 L<XXX>
+
+XXX Description of the purpose of the new file here
+
+=head2 Changes to Existing Documentation
+
+XXX Changes which significantly change existing files in F<pod/> go here.
+However, any changes to F<pod/perldiag.pod> should go in the L</Diagnostics>
+section.
+
+=head3 L<XXX>
+
+=over 4
+
+=item *
+
+XXX Description of the change here
+
+=back
+
+=head1 Diagnostics
+
+The following additions or changes have been made to diagnostic output,
+including warnings and fatal error messages. For the complete list of
+diagnostic messages, see L<perldiag>.
+
+XXX New or changed warnings emitted by the core's C<C> code go here. Also
+include any changes in L<perldiag> that reconcile it to the C<C> code.
+
+=head2 New Diagnostics
+
+XXX Newly added diagnostic messages go under here, separated into New Errors
+and New Warnings
+
+=head3 New Errors
+
+=over 4
+
+=item *
+
+L<Version control conflict marker|perldiag/"Version control conflict marker">
+
+=item *
-Perl 5.25.0 represents about an hour or two of work since Perl 5.24.0 and
-contains approximately 4,900 lines of changes across 42 files from 1 author,
-who mostly just ran code-updating tools.
+XXX L<message|perldiag/"message">
-Excluding auto-generated files, documentation and release tools, there were
-approximately 66 lines of changes to 7 .pm, .t, .c and .h files.
+=back
-Perl continues to flourish into its third decade thanks to a vibrant community
-of users and developers. The following people are known to have contributed the
-improvements that became Perl 5.25.0:
+=head3 New Warnings
+
+=over 4
+
+=item *
+
+XXX L<message|perldiag/"message">
+
+=back
+
+=head2 Changes to Existing Diagnostics
+
+XXX Changes (i.e. rewording) of diagnostic messages go here
+
+=over 4
+
+=item *
+
+XXX Describe change here
+
+=back
+
+=head1 Utility Changes
+
+XXX Changes to installed programs such as F<perlbug> and F<xsubpp> go here.
+Most of these are built within the directory F<utils>.
+
+[ List utility changes as a =head2 entry for each utility and =item
+entries for each change
+Use L<XXX> with program names to get proper documentation linking. ]
+
+=head2 L<XXX>
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head1 Configuration and Compilation
+
+XXX Changes to F<Configure>, F<installperl>, F<installman>, and analogous tools
+go here. Any other changes to the Perl build process should be listed here.
+However, any platform-specific changes should be listed in the
+L</Platform Support> section, instead.
+
+[ List changes as a =item entry ].
+
+=over 4
+
+=item *
+
+F<make_ext.pl> no longer updates a module's F<pm_to_blib> file when no
+files require updates. This could cause dependencies, F<perlmain.c>
+in particular, to be rebuilt unnecessarily. [perl #126710]
+
+=back
+
+=head1 Testing
+
+XXX Any significant changes to the testing of a freshly built perl should be
+listed here. Changes which create B<new> files in F<t/> go here as do any
+large changes to the testing harness (e.g. when parallel testing was added).
+Changes to existing files in F<t/> aren't worth summarizing, although the bugs
+that they represent may be covered elsewhere.
+
+[ List each test improvement as a =item entry ]
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head1 Platform Support
+
+XXX Any changes to platform support should be listed in the sections below.
+
+[ Within the sections, list each platform as a =item entry with specific
+changes as paragraphs below it. ]
+
+=head2 New Platforms
+
+XXX List any platforms that this version of perl compiles on, that previous
+versions did not. These will either be enabled by new files in the F<hints/>
+directories, or new subdirectories and F<README> files at the top level of the
+source tree.
+
+=over 4
+
+=item XXX-some-platform
+
+XXX
+
+=back
+
+=head2 Discontinued Platforms
+
+XXX List any platforms that this version of perl no longer compiles on.
+
+=over 4
+
+=item XXX-some-platform
+
+XXX
+
+=back
+
+=head2 Platform-Specific Notes
+
+XXX List any changes for specific platforms. This could include configuration
+and compilation changes or changes in portability/compatibility. However,
+changes within modules for platforms should generally be listed in the
+L</Modules and Pragmata> section.
+
+=over 4
+
+=item XXX-some-platform
+
+XXX
+
+=back
+
+=head1 Internal Changes
+
+XXX Changes which affect the interface available to C<XS> code go here. Other
+significant internal changes for future core maintainers should be noted as
+well.
+
+[ List each change as a =item entry ]
+
+=over 4
+
+=item *
+
+Perl no longer panics when switching into some locales on machines with
+buggy C<strxfrm()> implementations in their libc. [perl #121734]
+
+=back
+
+=head1 Selected Bug Fixes
+
+XXX Important bug fixes in the core language are summarized here. Bug fixes in
+files in F<ext/> and F<lib/> are best summarized in L</Modules and Pragmata>.
+
+[ List each fix as a =item entry ]
+
+=over 4
+
+=item *
+
+C< until ($x = 1) { ... } > and C< ... until $x = 1 > now properly
+warn when syntax warnings are enabled. [perl #127333]
+
+=back
+
+=head1 Known Problems
+
+XXX Descriptions of platform agnostic bugs we know we can't fix go here. Any
+tests that had to be C<TODO>ed for the release would be noted here. Unfixed
+platform specific bugs also go here.
+
+[ List each fix as a =item entry ]
+
+=over 4
+
+=item *
+
+XXX
+
+=back
+
+=head1 Errata From Previous Releases
+
+=over 4
+
+=item *
+
+XXX Add anything here that we forgot to add, or were mistaken about, in
+the perldelta of a previous release.
+
+=back
+
+=head1 Obituary
+
+XXX If any significant core contributor has died, we've added a short obituary
+here.
+
+=head1 Acknowledgements
-Ricardo Signes
+XXX Generate this with:
-For a more complete list of all of Perl's historical contributors, please see
-the F<AUTHORS> file in the Perl source distribution.
+ perl Porting/acknowledgements.pl v5.25.1..HEAD
=head1 Reporting Bugs