The SVs in the names AV have their PV being the name of the variable.
xlow+1..xhigh inclusive in the NV union is a range of cop_seq numbers for
-which the name is valid. For typed lexicals name SV is SVt_PVMG and SvSTASH
+which the name is valid (assed through the macros COP_SEQ_RANGE_LOW and _HIGH).
+During compilation, these fields may hold the special value PERL_PADSEQ_INTRO
+to indicate various stages:
+
+ COP_SEQ_RANGE_LOW _HIGH
+ ----------------- -----
+ PERL_PADSEQ_INTRO 0 variable not yet introduced: { my ($x
+ valid-seq# PERL_PADSEQ_INTRO variable in scope: { my ($x)
+ valid-seq# valid-seq# compilation of scope complete: { my ($x) }
+
+For typed lexicals name SV is SVt_PVMG and SvSTASH
points at the type. For C<our> lexicals, the type is also SVt_PVMG, with the
SvOURSTASH slot pointing at the stash of the associated global (so that
duplicate C<our> declarations in the same package can be detected). SvUVX is
#define PARENT_FAKELEX_FLAGS_set(sv,val) \
STMT_START { ((XPVNV*)SvANY(sv))->xnv_u.xpad_cop_seq.xhigh = (val); } STMT_END
-#define PAD_MAX I32_MAX
-
#ifdef PERL_MAD
void pad_peg(const char* s) {
static int pegcnt; /* XXX not threadsafe */
offset = pad_add_name_sv(namesv, flags, typestash, ourstash);
/* not yet introduced */
- COP_SEQ_RANGE_LOW_set(namesv, PAD_MAX); /* min */
- COP_SEQ_RANGE_HIGH_set(namesv, 0); /* max */
+ COP_SEQ_RANGE_LOW_set(namesv, PERL_PADSEQ_INTRO);
+ COP_SEQ_RANGE_HIGH_set(namesv, 0);
if (!PL_min_intro_pending)
PL_min_intro_pending = offset;
pad_peg("add_anon");
sv_setpvs(name, "&");
- /* Are these two actually ever read? */
- COP_SEQ_RANGE_HIGH_set(name, ~0);
- COP_SEQ_RANGE_LOW_set(name, 1);
+ /* These two aren't used; just make sure they're not equal to
+ * PERL_PADSEQ_INTRO */
+ COP_SEQ_RANGE_LOW_set(name, 0);
+ COP_SEQ_RANGE_HIGH_set(name, 0);
ix = pad_alloc(op_type, SVs_PADMY);
av_store(PL_comppad_name, ix, name);
/* XXX DAPM use PL_curpad[] ? */
if (sv
&& sv != &PL_sv_undef
&& !SvFAKE(sv)
- && (COP_SEQ_RANGE_HIGH(sv) == PAD_MAX || COP_SEQ_RANGE_HIGH(sv) == 0)
+ && ( COP_SEQ_RANGE_LOW(sv) == PERL_PADSEQ_INTRO
+ || COP_SEQ_RANGE_HIGH(sv) == PERL_PADSEQ_INTRO)
&& sv_eq(name, sv))
{
if (is_our && (SvPAD_OUR(sv)))
"\"%s\" variable %"SVf" masks earlier declaration in same %s",
(is_our ? "our" : PL_parser->in_my == KEY_my ? "my" : "state"),
sv,
- (COP_SEQ_RANGE_HIGH(sv) == PAD_MAX ? "scope" : "statement"));
+ (COP_SEQ_RANGE_HIGH(sv) == PERL_PADSEQ_INTRO
+ ? "scope" : "statement"));
--off;
break;
}
if (sv
&& sv != &PL_sv_undef
&& !SvFAKE(sv)
- && (COP_SEQ_RANGE_HIGH(sv) == PAD_MAX || COP_SEQ_RANGE_HIGH(sv) == 0)
+ && ( COP_SEQ_RANGE_LOW(sv) == PERL_PADSEQ_INTRO
+ || COP_SEQ_RANGE_HIGH(sv) == PERL_PADSEQ_INTRO)
&& SvOURSTASH(sv) == ourstash
&& sv_eq(name, sv))
{
&& !SvFAKE(namesv)
&& (SvPAD_OUR(namesv))
&& strEQ(SvPVX_const(namesv), name)
- && COP_SEQ_RANGE_LOW(namesv) == PAD_MAX /* min */
+ && COP_SEQ_RANGE_LOW(namesv) == PERL_PADSEQ_INTRO
)
return offset;
}
if (namesv && namesv != &PL_sv_undef
&& strEQ(SvPVX_const(namesv), name))
{
- if (SvFAKE(namesv))
+ if (SvFAKE(namesv)) {
fake_offset = offset; /* in case we don't find a real one */
- else if ( seq > COP_SEQ_RANGE_LOW(namesv) /* min */
- && seq <= COP_SEQ_RANGE_HIGH(namesv)) /* max */
- break;
+ continue;
+ }
+ /* is seq within the range _LOW to _HIGH ?
+ * This is complicated by the fact that PL_cop_seqmax
+ * may have wrapped around at some point */
+ if (COP_SEQ_RANGE_LOW(namesv) == PERL_PADSEQ_INTRO)
+ continue; /* not yet introduced */
+
+ if (COP_SEQ_RANGE_HIGH(namesv) == PERL_PADSEQ_INTRO) {
+ /* in compiling scope */
+ if (
+ (seq > COP_SEQ_RANGE_LOW(namesv))
+ ? (seq - COP_SEQ_RANGE_LOW(namesv) < (U32_MAX >> 1))
+ : (COP_SEQ_RANGE_LOW(namesv) - seq > (U32_MAX >> 1))
+ )
+ break;
+ }
+ else if (
+ (COP_SEQ_RANGE_LOW(namesv) > COP_SEQ_RANGE_HIGH(namesv))
+ ?
+ ( seq > COP_SEQ_RANGE_LOW(namesv)
+ || seq <= COP_SEQ_RANGE_HIGH(namesv))
+
+ : ( seq > COP_SEQ_RANGE_LOW(namesv)
+ && seq <= COP_SEQ_RANGE_HIGH(namesv))
+ )
+ break;
}
}
dVAR;
SV **svp;
I32 i;
+ U32 seq;
ASSERT_CURPAD_ACTIVE("intro_my");
if (! PL_min_intro_pending)
for (i = PL_min_intro_pending; i <= PL_max_intro_pending; i++) {
SV * const sv = svp[i];
- if (sv && sv != &PL_sv_undef && !SvFAKE(sv) && !COP_SEQ_RANGE_HIGH(sv)) {
- COP_SEQ_RANGE_HIGH_set(sv, PAD_MAX); /* Don't know scope end yet. */
+ if (sv && sv != &PL_sv_undef && !SvFAKE(sv)
+ && COP_SEQ_RANGE_LOW(sv) == PERL_PADSEQ_INTRO)
+ {
+ COP_SEQ_RANGE_HIGH_set(sv, PERL_PADSEQ_INTRO); /* Don't know scope end yet. */
COP_SEQ_RANGE_LOW_set(sv, PL_cop_seqmax);
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
"Pad intromy: %ld \"%s\", (%lu,%lu)\n",
);
}
}
+ seq = PL_cop_seqmax;
+ PL_cop_seqmax++;
+ if (PL_cop_seqmax == PERL_PADSEQ_INTRO) /* not a legal value */
+ PL_cop_seqmax++;
PL_min_intro_pending = 0;
PL_comppad_name_fill = PL_max_intro_pending; /* Needn't search higher */
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad intromy: seq -> %ld\n", (long)(PL_cop_seqmax+1)));
+ "Pad intromy: seq -> %ld\n", (long)(PL_cop_seqmax)));
- return PL_cop_seqmax++;
+ return seq;
}
/*
/* "Deintroduce" my variables that are leaving with this scope. */
for (off = AvFILLp(PL_comppad_name); off > PL_comppad_name_fill; off--) {
const SV * const sv = svp[off];
- if (sv && sv != &PL_sv_undef && !SvFAKE(sv) && COP_SEQ_RANGE_HIGH(sv) == PAD_MAX) {
+ if (sv && sv != &PL_sv_undef && !SvFAKE(sv)
+ && COP_SEQ_RANGE_HIGH(sv) == PERL_PADSEQ_INTRO)
+ {
COP_SEQ_RANGE_HIGH_set(sv, PL_cop_seqmax);
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
"Pad leavemy: %ld \"%s\", (%lu,%lu)\n",
}
}
PL_cop_seqmax++;
+ if (PL_cop_seqmax == PERL_PADSEQ_INTRO) /* not a legal value */
+ PL_cop_seqmax++;
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
"Pad leavemy: seq = %ld\n", (long)PL_cop_seqmax));
}
https://perl5.git.perl.org / perl5.git / blobdiff