*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
-case "$d_dosuid" in
-*define*) suidperl='suidperl' ;;
-*) suidperl='';;
-esac
-
linklibperl='$(LIBPERL)'
linklibperl_nonshr=''
shrpldflags='$(LDDLFLAGS)'
esac
pldlflags="$cccdlflags"
- static_target='static_pic'
+ static_ldflags=''
case "${osname}${osvers}" in
next4*)
ld=libtool
;;
*) pldlflags=''
- static_target='static'
+ static_ldflags='CCCDLFLAGS='
;;
esac
: Parallel makes reveal that we have some interdependencies
case $f in
+ Encode) extra_dep="$extra_dep
+$this_target: lib/auto/Cwd/Cwd.$dlext" ;;
Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
$this_target: lib/auto/List/Util/Util.$dlext" ;;
Unicode/Normalize) extra_dep="$extra_dep
$this_target: uni.data" ;;
+ Text/ParseWords) extra_dep="$extra_dep
+$this_target: lib/auto/Scalar/Util.$dlext" ;;
esac
done
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
+ : Parallel makes reveal that we have some interdependencies
+ this_target="lib/auto/$f/$base\$(LIB_EXT)"
+ case $f in
+ Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
+$this_target: lib/auto/List/Util/Util\$(LIB_EXT)" ;;
+ Unicode/Normalize) extra_dep="$extra_dep
+$this_target: uni.data" ;;
+ esac
done
nonxs_list=' '
for f in $nonxs_ext; do
- base=`echo "$f" | sed 's/.*\///'`
- nonxs_list="$nonxs_list ext/$f/pm_to_blib"
+ p=`echo "$f" | tr / -`
+ nonxs_list="$nonxs_list ext/$p/pm_to_blib"
done
dtrace_h=''
# if building a shared libperl.so that might later be linked into
# another application, then it might be appropriate to also build static
# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
-# for GNU cc). This is handled by ext/util/make_ext.pl.
-STATIC = $static_target
+# for GNU cc).
+STATIC_LDFLAGS = $static_ldflags
# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
OBJ_EXT = $_o
PATH_SEP = $p_
+# Macros to invoke a copy of miniperl during the build. Targets which
+# are built using these macros should depend on \$(MINIPERL_EXE)
+MINIPERL_EXE = miniperl\$(EXE_EXT)
+MINIPERL = \$(LDLIBPTH) \$(RUN) ./miniperl\$(EXE_EXT) -Ilib
+
#
dynamic_ext = $dynamic_list
static_ext = $static_list
libs = $perllibs $cryptlib
-public = perl\$(EXE_EXT) $suidperl utilities translators
+public = perl\$(EXE_EXT) utilities translators
shellflags = $shellflags
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
-# we dont include lib/Config_git.pl here, as it causes circular dependencies
-CONFIGPM = lib/Config.pm lib/Config_heavy.pl
-# so we add it here:
-CONFIGPM_EXTRA = $(CONFIGPM) lib/Config_git.pl
+CONFIGPM_FROM_CONFIG_SH = lib/Config.pm lib/Config_heavy.pl
+CONFIGPM = $(CONFIGPM_FROM_CONFIG_SH) lib/Config_git.pl
CONFIGPOD = lib/Config.pod
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<'!NO!SUBS!'
-private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm
+private = preplibrary $(CONFIGPM) $(CONFIGPOD) lib/ExtUtils/Miniperl.pm git_version.h
# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
- makedir.SH myconfig.SH writemain.SH pod/Makefile.SH
+ myconfig.SH writemain.SH pod/Makefile.SH
shextract = Makefile cflags config.h makeaperl makedepend \
makedir myconfig writemain pod/Makefile
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
-# lib/lib.pm is not listed here because it has a rule of its own.
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
pod/pod2usage pod/podchecker pod/podselect
-addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
+addedbyconf = UU $(shextract) $(plextract) pstruct
# Unicode data files generated by mktables
unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \
c1 = av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro.c perl.c
c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
-c3 = taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c globals.c
+c3 = taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c
c4 = perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c5 = $(madlysrc) $(mallocsrc)
obj0 = op$(OBJ_EXT) perl$(OBJ_EXT)
obj1 = $(madlyobj) $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
-obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
+obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
mini_obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
ndt_obj = $(obj0) $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
obj = $(ndt_obj) $(DTRACE_O)
+perltoc_pod_prereqs = extra.pods pod/perlapi.pod pod/perldelta.pod pod/perlintern.pod pod/perlmodlib.pod
+generated_pods = pod/perltoc.pod $(perltoc_pod_prereqs)
+
+Icwd = -Iext/Cwd -Iext/Cwd/lib
+
lintflags = \
-b \
-n \
.c.s:
$(CCCMDSRC) -S $*.c
-all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) miniperl extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
+all: $(FIRSTMAKEFILE) $(MINIPERL_EXE) miniperl $(generated_pods) $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
-sperl$(OBJ_EXT): perl.c $(h)
- $(RMS) sperl.c
- $(LNS) perl.c sperl.c
- $(CCCMD) -DIAMSUID sperl.c
- $(RMS) sperl.c
-
-sperl.i: perl.c $(h)
- $(CCCMDSRC) -DIAMSUID -E perl.c > sperl.i
-
.PHONY: all translators utilities
-git_version.h: miniperl$(EXE_EXT) make_patchnum.pl
- -$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_patchnum.pl
+lib/Config_git.pl git_version.h: $(MINIPERL_EXE) make_patchnum.pl
+ $(MINIPERL) make_patchnum.pl
# make sure that we recompile perl.c if the git version changes
perl$(OBJ_EXT): git_version.h
-sperl$(OBJ_EXT): git_version.h
-translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE
+translators: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
-utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE
+utilities: $(MINIPERL_EXE) $(CONFIGPM) $(plextract) FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
perlmini\$(OBJ_EXT): perlmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_IS_MINIPERL perlmini.c
-globals\$(OBJ_EXT): uudmap.h
+globals\$(OBJ_EXT): uudmap.h bitcount.h
-uudmap.h: generate_uudmap\$(HOST_EXE_EXT)
- \$(RUN) ./generate_uudmap\$(HOST_EXE_EXT) >uudmap.h
+uudmap.h bitcount.h: generate_uudmap\$(HOST_EXE_EXT)
+ \$(RUN) ./generate_uudmap\$(HOST_EXE_EXT) uudmap.h bitcount.h
generate_uudmap\$(HOST_EXE_EXT): generate_uudmap\$(OBJ_EXT)
\$(CC) -o generate_uudmap\$(EXE_EXT) \$(LDFLAGS) generate_uudmap\$(OBJ_EXT) \$(libs)
;;
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-MINIPERLEXP = miniperl$(EXE_EXT)
+MINIPERLEXP = $(MINIPERL_EXE)
PERLEXPORT = perl.exp
case "${osname}${osvers}" in
aix*|beos*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
- $(CC) -o miniperl$(EXE_EXT) $(CLDFLAGS) \
+$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
+ $(CC) -o $(MINIPERL_EXE) $(CLDFLAGS) \
$(mini_obj) \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
;;
next4*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(mini_obj) perlmini$(OBJ_EXT) opmini$(OBJ_EXT)
- $(CC) -o miniperl$(EXE_EXT) $(mini_obj) \
+$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) perlmini$(OBJ_EXT) opmini$(OBJ_EXT)
+ $(CC) -o $(MINIPERL_EXE) $(mini_obj) \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
esac
$spitshell >>$Makefile <<'!NO!SUBS!'
-miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
+$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
-@rm -f miniperl.xok
- $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl$(EXE_EXT) \
+ $(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o $(MINIPERL_EXE) \
$(mini_obj) \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
;;
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
-miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
+$(MINIPERL_EXE): $& miniperlmain$(OBJ_EXT) $(mini_obj) opmini$(OBJ_EXT) perlmini$(OBJ_EXT)
-@rm -f miniperl.xok
- $(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl$(EXE_EXT) \
+ $(LDLIBPTH) $(CC) $(CLDFLAGS) -o $(MINIPERL_EXE) \
$(mini_obj) \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perlmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl$(HOST_EXE_EXT) -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
microperl:
$(MAKE) -f Makefile.micro
-# This version, if specified in Configure, does ONLY those scripts which need
-# set-id emulation. Suidperl must be setuid root. It contains the "taint"
-# checks as well as the special code to validate that the script in question
-# has been invoked correctly.
-
-!NO!SUBS!
-
-case "${osname}" in
-aix*)
-$spitshell >>Makefile <<'!NO!SUBS!'
-suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL_NONSHR) $(LLIBPERL) `cat ext.libs` $(libs)
-
-!NO!SUBS!
-;;
-*)
-$spitshell >>Makefile <<'!NO!SUBS!'
-suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
- $(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
-
!NO!SUBS!
-;;
-esac
fi
catamount)
$spitshell >>$Makefile <<!GROK!THIS!
.PHONY: makeppport
-makeppport: miniperl\$(EXE_EXT) \$(CONFIGPM)
+makeppport: \$(MINIPERL_EXE) \$(CONFIGPM)
-@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
- (cd ext/Devel/PPPort && `pwd`/run.sh ../../../miniperl$(EXE_EXT) -I../../../lib \$\$f); \
+ (cd ext/Devel-PPPort && `pwd`/run.sh ../../$(MINIPERL_EXE) -I../../lib \$\$f); \
done
!GROK!THIS!
*)
$spitshell >>$Makefile <<'!NO!SUBS!'
.PHONY: makeppport
-makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport
+makeppport: $(MINIPERL_EXE) $(CONFIGPM) $(nonxs_ext)
+ $(MINIPERL) $(Icwd) mkppport
!NO!SUBS!
;;
$spitshell >>$Makefile <<'!NO!SUBS!'
-# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
-# test -d lib/auto || mkdir lib/auto
-# We need to autosplit in two steps because VOS can't handle so many args
-#
.PHONY: preplibrary
-preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
- @sh ./makedir lib/auto
- @echo " AutoSplitting perl library"
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib -MAutoSplit -MFile::Find -e 'find ({no_chdir=>1, wanted => sub {autosplit_lib_modules($$_) if /\.pm$$/}}, "lib")'
- $(MAKE) lib/re.pm
-
-$(CONFIGPOD): config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib configpm
+preplibrary: $(MINIPERL_EXE) $(CONFIGPM) lib/re.pm $(PREPLIBRARY_LIBPERL)
-$(CONFIGPM): $(CONFIGPOD)
+$(CONFIGPM_FROM_CONFIG_SH) $(CONFIGPOD): config.sh $(MINIPERL_EXE) configpm Porting/Glossary lib/Config_git.pl
+ $(MINIPERL) configpm
-lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) minimod.pl > lib/ExtUtils/Miniperl.pm
+lib/ExtUtils/Miniperl.pm: miniperlmain.c $(MINIPERL_EXE) minimod.pl $(CONFIGPM)
+ $(MINIPERL) minimod.pl > lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
@-rm -f $@
cp ext/re/re.pm lib/re.pm
-$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
+$(plextract): $(MINIPERL_EXE) $(CONFIGPM) x2p/s2p $(dynamic_ext)
@-rm -f $@
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -I`pwd`/lib $@.PL
+ $(MINIPERL) $@.PL
-x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
+x2p/s2p: $(MINIPERL_EXE) $(CONFIGPM) $(dynamic_ext) x2p/s2p.PL
cd x2p; $(LDLIBPTH) $(MAKE) s2p
-lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM)
- @-rm -f $@
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib lib/lib_pm.PL
-
unidatafiles $(unidatafiles): uni.data
-uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
- cd lib/unicore && $(LDLIBPTH) $(RUN) ../../miniperl$(EXE_EXT) -I../../lib mktables -w
+uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
+ $(MINIPERL) -Iext/Cwd/lib lib/unicore/mktables -C lib/unicore -w
touch uni.data
-extra.pods: miniperl$(EXE_EXT)
+# perl$(EXE_EXT) and ext because buildtoc uses Text::Wrap uses re
+# But also this ensures that all extensions are built before we try to scan
+# them, which picks up Devel::PPPort's documentation.
+pod/perltoc.pod: $(perltoc_pod_prereqs) perl$(EXE_EXT) $(ext) pod/buildtoc
+ $(LDLIBPTH) $(RUN) ./perl$(EXE_EXT) -f -Ilib pod/buildtoc --build-toc -q
+
+pod/perlapi.pod pod/perlintern.pod: $(MINIPERL_EXE) autodoc.pl embed.fnc
+ $(MINIPERL) autodoc.pl
+
+pod/perlmodlib.pod: $(MINIPERL_EXE) pod/perlmodlib.PL MANIFEST
+ $(MINIPERL) $(Icwd) pod/perlmodlib.PL -q
+
+pod/perldelta.pod: pod/perl5110delta.pod
+ $(LNS) perl5110delta.pod pod/perldelta.pod
+
+extra.pods: $(MINIPERL_EXE)
-@test ! -f extra.pods || rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
- cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
+ $(LNS) ../$$x "pod/perl"$$nx".pod" ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
- -@rm -f pod/perlvms.pod
- -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
- -@rm -f pod/perldelta.pod
- -@test -f pod/perl5110delta.pod && cd pod && $(LNS) perl5110delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
extras.make: perl$(EXE_EXT)
-@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
no-install install.perl install.man install.html
META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib Porting/makemeta
+ $(MINIPERL) Porting/makemeta
install-strip:
$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
CHMOD_W = chmod +w
# The following files are generated automatically
-# autodoc.pl: pod/perlapi.pod pod/perlintern.pod
# embed.pl: proto.h embed.h embedvar.h global.sym
# perlapi.h perlapi.c
# [* embed.pl needs pp.sym generated by opcode.pl! *]
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
- pod/perlintern.pod pod/perlapi.pod \
perlapi.h perlapi.c regnodes.h \
warnings.h lib/warnings.pm
-.PHONY: regen_headers regen_pods regen_all
+.PHONY: regen_headers regen_all
regen: FORCE
-perl regen.pl
regen_headers: FORCE
-perl regen.pl -v
-regen_pods: FORCE
- -cd pod; $(LDLIBPTH) $(MAKE) regen_pods
-
-regen_all: regen regen_pods
+regen_all: regen
.PHONY: manisort manicheck
manisort: FORCE
- LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
- LC_ALL=C sort -fdo MANIFEST MANIFEST)
+ @perl Porting/manisort -q || (echo "WARNING: re-sorting MANIFEST"; \
+ perl Porting/manisort -q -o MANIFEST; sh -c true)
manicheck: FORCE
perl Porting/manicheck
#
# DynaLoader may be needed for extensions that use Makefile.PL.
-$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+$(DYNALOADER): $(MINIPERL_EXE) preplibrary FORCE $(nonxs_ext)
+ $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+d_dummy $(dynamic_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
+ $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
-s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+s_dummy $(static_ext): $(MINIPERL_EXE) preplibrary makeppport $(DYNALOADER) FORCE
+ $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
-n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary FORCE
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
+n_dummy $(nonxs_ext): $(MINIPERL_EXE) preplibrary FORCE
+ $(MINIPERL) make_ext.pl $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
!NO!SUBS!
$spitshell >>$Makefile <<EOF
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
- distclean veryclean _verycleaner \
- cleanup_unpacked_files unpack_files
+ distclean veryclean _verycleaner
-clean: cleanup_unpacked_files _tidy _mopup
+clean: _tidy _mopup
-realclean: cleanup_unpacked_files _realcleaner _mopup
+realclean: _realcleaner _mopup
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
_clobber:
rm -f t/test_state
rm -f config.sh cppstdin Policy.sh extras.lst
-clobber: cleanup_unpacked_files _realcleaner _mopup _clobber
+clobber: _realcleaner _mopup _clobber
distclean: clobber
# Like distclean but also removes emacs backups and *.orig.
-veryclean: cleanup_unpacked_files _verycleaner _mopup _clobber
+veryclean: _verycleaner _mopup _clobber
-@rm -f Obsolete Wanted
# Do not 'make _mopup' directly.
_mopup:
- rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT)
+ rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c perlmini.c uudmap.h generate_uudmap$(EXE_EXT) bitcount.h
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
- -rm -f perl.exp ext.libs extra.pods uni.data opmini.o perlmini.o
+ -rm -f perl.exp ext.libs $(generated_pods) uni.data opmini.o perlmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
- -rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
+ -rm -f perl$(EXE_EXT) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
-rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
-rm -f config.arch config.over $(DTRACE_H)
-cd x2p; $(LDLIBPTH) $(MAKE) clean
-rm -f lib/Config_git.pl git_version.h
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl clean $$x MAKE=$(MAKE) ; \
+ $(MINIPERL) make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
done
_cleaner1:
-cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
- -@if test -f miniperl$(EXE_EXT) ; then \
+ -@if test -f $(MINIPERL_EXE) ; then \
for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib ext/util/make_ext.pl $(CLEAN) $$x MAKE=$(MAKE) ; \
+ $(MINIPERL) make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
done ; \
else \
sh $(CLEAN).sh ; \
fi
rm -f realclean.sh veryclean.sh
- -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport --clean
+ -@test ! -f ./$(MINIPERL_EXE) || $(MINIPERL) mkppport --clean
# Some systems do not support "?", so keep these files separate.
_cleaner2:
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
-.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
- test_tty test-tty _test_tty test_notty test-notty _test_notty \
+.PHONY: test check test_prep test_prep_nodll test_prep_pre \
+ test_tty test-tty test_notty test-notty \
utest ucheck test.utf8 check.utf8 test.torture torturetest \
test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
test.third check.third utest.third ucheck.third test_notty.third \
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
-TESTFILE=TEST
-
-_test_prep: unpack_files
- cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
-
# Architecture-neutral stuff:
test_prep_pre: preplibrary utilities $(nonxs_ext)
-test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
- PERL=./perl $(MAKE) _test_prep
-
-_test_tty:
- cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES) </dev/tty
-
-_test_notty:
- cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES)
-
-unpack_files:
- $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m
-
-cleanup_unpacked_files:
- -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c
-
-# The second branch is for testing without a tty or controlling terminal,
-# see t/op/stat.t
-_test:
- if (true </dev/tty) >/dev/null 2>&1; then \
- $(MAKE) TEST_ARGS='$(TEST_ARGS)' TESTFILE=$(TESTFILE) _test_tty ; \
- else \
- $(MAKE) TEST_ARGS='$(TEST_ARGS)' TESTFILE=$(TESTFILE) _test_notty ; \
- fi
- @echo "Ran tests" > t/rantests
+test_prep: test_prep_pre $(MINIPERL_EXE) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
+ cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
test check: test_prep
- PERL=./perl $(MAKE) _test
+ ./runtests choose
test_tty: test_prep
- PERL=./perl $(MAKE) _test_tty
+ ./runtests tty
test_notty: test_prep
- PERL=./perl $(MAKE) _test_notty
+ ./runtests no-tty
utest ucheck test.utf8 check.utf8: test_prep
- PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
+ TEST_ARGS=-utf8 ./runtests choose
coretest: test_prep
- PERL=./perl TEST_ARGS=-core $(MAKE) _test
+ TEST_ARGS=-core ./runtests choose
test-prep: test_prep
# Torture testing
test.torture torturetest: test_prep
- PERL=./perl TEST_ARGS=-torture $(MAKE) _test
+ TEST_ARGS=-torture ./runtests choose
# Targets for UTF16 testing:
minitest.utf16: minitest.prep
- - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) $(RUN) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t mro/*.t </dev/tty
+ - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../$(MINIPERL_EXE) perl$(EXE_EXT)) \
+ && $(LDLIBPTH) $(RUN) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
test.utf16 check.utf16: test_prep
- PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
+ TEST_ARGS=-utf16 ./runtests choose
utest.utf16 ucheck.utf16: test_prep
- PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
+ TEST_ARGS="-utf8 -utf16" ./runtests choose
# Targets for valgrind testing:
test_prep.valgrind: test_prep perl.valgrind
- PERL=./perl $(MAKE) _test_prep
test.valgrind check.valgrind: test_prep perl.valgrind.config
- PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
+ PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' ./runtests choose
utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
- PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
+ PERL_VALGRIND=1 TEST_ARGS=-utf8 ./runtests choose
test_notty.valgrind: test_prep.valgrind perl.valgrind.config
- PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
+ PERL_VALGRIND=1 ./runtests no-tty
# Targets for Third Degree testing.
test_prep.third: test_prep perl.third
- PERL=./perl.third $(MAKE) _test_prep
+ cd t && (rm -f ./perl.third$(EXE_EXT); $(LNS) ../perl.third$(EXE_EXT) perl.third(EXE_EXT))
test.third check.third: test_prep.third perl.third
- PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
+ PERL=./perl.third PERL_3LOG=1 ./runtests choose
utest.third ucheck.third: test_prep.third perl.third
- PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test
+ PERL=./perl.third PERL_3LOG=1 TEST_ARGS=-utf8 ./runtests choose
test_notty.third: test_prep.third perl.third
- PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
+ PERL=./perl.third PERL_3LOG=1 ./runtests choose
# Targets for Deparse testing.
test.deparse: test_prep
- PERL=./perl TEST_ARGS=-deparse $(MAKE) _test
+ TEST_ARGS=-deparse ./runtests choose
test_notty.deparse: test_prep
- PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
+ TEST_ARGS=-deparse ./runtests no-tty
# Targets to run the test suite with -t
test.taintwarn: test_prep
- PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
+ TEST_ARGS=-taintwarn ./runtests choose
minitest.prep:
- -@test -f lib/lib.pm && test -f lib/Config.pm || \
- $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
+ -@test test -f lib/Config.pm || $(MAKE) lib/Config.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
- @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
+ @echo "to build lib/Config.pm, or the Unicode data files."
@echo " "
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
-minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep
- - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
- && $(LDLIBPTH) $(RUN) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t mro/*.t </dev/tty
+minitest: $(MINIPERL_EXE) lib/re.pm minitest.prep
+ - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../$(MINIPERL_EXE) perl$(EXE_EXT)) \
+ && $(LDLIBPTH) $(RUN) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t </dev/tty
# Test via harness
test_harness: test_prep
- PERL=./perl $(MAKE) TESTFILE=harness _test
+ TESTFILE=harness ./runtests choose
test_harness_notty: test_prep
- PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
+ HARNESS_NOTTY=1 TESTFILE=harness ./runtests choose
test-reonly: test_prep
- PERL=./perl TEST_ARGS='-re \\bpat\\b \\breg \\bre\b \\bsubst \\brxcode' $(MAKE) TESTFILE=harness _test
+ TEST_ARGS='-re \bre\/' TESTFILE=harness ./runtests choose
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
https://perl5.git.perl.org / perl5.git / blobdiff