use Getopt::Long qw(:config bundling no_auto_abbrev);
use Pod::Usage;
use Config;
-use Carp;
my @targets
= qw(config.sh config.h miniperl lib/Config.pm Fcntl perl test_prep);
-my $cpus;
-if (open my $fh, '<', '/proc/cpuinfo') {
- while (<$fh>) {
- ++$cpus if /^processor\s+:\s+\d+$/;
- }
-} elsif (-x '/sbin/sysctl') {
- $cpus = 1 + $1 if `/sbin/sysctl hw.ncpu` =~ /^hw\.ncpu: (\d+)$/;
-} elsif (-x '/usr/bin/getconf') {
- $cpus = 1 + $1 if `/usr/bin/getconf _NPROCESSORS_ONLN` =~ /^(\d+)$/;
-}
-
my %options =
(
- jobs => defined $cpus ? $cpus + 1 : 2,
'expect-pass' => 1,
clean => 1, # mostly for debugging this
);
(
usedevel => '',
optimize => '-g',
- cc => 'ccache cc',
ld => 'cc',
($linux64 ? (libpth => \@paths) : ()),
);
unless(GetOptions(\%options,
- 'target=s', 'jobs|j=i', 'expect-pass=i',
+ 'target=s', 'make=s', 'jobs|j=i', 'expect-pass=i',
'expect-fail' => sub { $options{'expect-pass'} = 0; },
- 'clean!', 'one-liner|e=s', 'match=s', 'force-manifest',
- 'force-regen', 'test-build', 'check-args', 'A=s@',
- 'usage|help|?',
+ 'clean!', 'one-liner|e=s', 'c', 'l', 'w', 'match=s',
+ 'no-match=s' => sub {
+ $options{match} = $_[1];
+ $options{'expect-pass'} = 0;
+ },
+ 'force-manifest', 'force-regen', 'test-build', 'validate',
+ 'all-fixups',
+ 'check-args', 'check-shebang!', 'usage|help|?', 'A=s@',
'D=s@' => sub {
my (undef, $val) = @_;
if ($val =~ /\A([^=]+)=(.*)/s) {
pod2usage(exitval => 255, verbose => 1);
}
-my ($target, $j, $match) = @options{qw(target jobs match)};
+my ($target, $match) = @options{qw(target match)};
+
+@ARGV = ('sh', '-c', 'cd t && ./perl TEST base/*.t')
+ if $options{validate} && !@ARGV;
-pod2usage(exitval => 255, verbose => 1) if $options{usage};
+pod2usage(exitval => 0, verbose => 2) if $options{usage};
pod2usage(exitval => 255, verbose => 1)
unless @ARGV || $match || $options{'test-build'} || defined $options{'one-liner'};
+pod2usage(exitval => 255, verbose => 1)
+ if !$options{'one-liner'} && ($options{l} || $options{w});
+
+check_shebang($ARGV[0])
+ if $options{'check-shebang'} && @ARGV && !$options{match};
exit 0 if $options{'check-args'};
.../Porting/bisect.pl -e 'my $a := 2;'
# When did this stop being an error?
.../Porting/bisect.pl --expect-fail -e '1 // 2'
- # When did this stop matching?
+ # When were all lines matching this pattern removed from all files?
.../Porting/bisect.pl --match '\b(?:PL_)hash_seed_set\b'
- # When did this start matching?
+ # When was some line matching this pattern added to some file?
.../Porting/bisect.pl --expect-fail --match '\buseithreads\b'
- # When did this test program stop working?
+ # When did this test program stop exiting 0?
.../Porting/bisect.pl -- ./perl -Ilib ../test_prog.pl
+ # When did this test start failing?
+ .../Porting/bisect.pl -- ./perl -Ilib t/TEST op/sort.t
# When did this first become valid syntax?
.../Porting/bisect.pl --target=miniperl --end=v5.10.0 \
--expect-fail -e 'my $a := 2;'
=item *
-Which commit added the first to match this regex?
+Which commit added the first file to match this regex?
=item *
-Which commit removed the last to match this regex?
+Which commit removed the last file to match this regex?
=back
By default F<bisect.pl> will process all options, then use the rest of the
command line as arguments to list C<system> to run a test case. By default,
the test case should pass (exit with 0) on earlier perls, and fail (exit
-non-zero) on I<blead>. F<bisect.pl> will use F<bisect-runner.pl> to find the
-earliest stable perl version on which the test case passes, check that it
-fails on blead, and then use F<bisect-runner.pl> with C<git bisect run> to
-find the commit which caused the failure.
+non-zero) on I<blead> (note that running most of perl's test files directly
+won't do this, you'll need to run them through a harness to get the proper
+error code). F<bisect.pl> will use F<bisect-runner.pl> to find the earliest
+stable perl version on which the test case passes, check that it fails on
+blead, and then use F<bisect-runner.pl> with C<git bisect run> to find the
+commit which caused the failure.
Because the test case is the complete argument to C<system>, it is easy to
run something other than the F<perl> built, if necessary. If you need to run
Earliest revision to test, as a I<commit-ish> (a tag, commit or anything
else C<git> understands as a revision). If not specified, F<bisect.pl> will
-search stable perl releases from 5.002 to 5.14.0 until it finds one where
-the test case passes.
+search stable perl releases until it finds one where the test case passes.
+The default is to search from 5.002 to 5.14.0. If F<bisect.pl> detects that
+the checkout is on a case insensitive file system, it will search from
+5.005 to 5.14.0
=item *
=item *
+-c
+
+Add C<-c> to the command line, to cause perl to exit after syntax checking.
+
+=item *
+
+-l
+
+Add C<-l> to the command line with C<-e>
+
+This will automatically append a newline to every output line of your testcase.
+Note that you can't specify an argument to F<perl>'s C<-l> with this, as it's
+not feasible to emulate F<perl>'s somewhat quirky switch parsing with
+L<Getopt::Long>. If you need the full flexibility of C<-l>, you need to write
+a full test case, instead of using C<bisect.pl>'s C<-e> shortcut.
+
+=item *
+
+-w
+
+Add C<-w> to the command line with C<-e>
+
+It's not valid to pass C<-c>, C<-l> or C<-w> to C<bisect.pl> unless you are
+also using C<-e>
+
+=item *
+
--expect-fail
The test case should fail for the I<start> revision, and pass for the I<end>
=item *
--Dnoextensions=Encode
+-D I<config_arg=value>
=item *
--Uusedevel
+-U I<config_arg>
=item *
--Accflags=-DNO_MATHOMS
+-A I<config_arg=value>
+
+Arguments (C<-A>, C<-D>, C<-U>) to pass to F<Configure>. For example,
-Arguments to pass to F<Configure>. Repeated C<-A> arguments are passed
+ -Dnoextensions=Encode
+ -Uusedevel
+ -Accflags=-DNO_MATHOMS
+
+Repeated C<-A> arguments are passed
through as is. C<-D> and C<-U> are processed in order, and override
previous settings for the same parameter. F<bisect-runner.pl> emulates
C<-Dnoextensions> when F<Configure> itself does not provide it, as it's
=item *
+--make I<make-prog>
+
+The C<make> command to use. If this not set, F<make> is used. If this is
+set, it also adds a C<-Dmake=...> else some recursive make invocations
+in extensions may fail. Typically one would use this as C<--make gmake>
+to use F<gmake> in place of the system F<make>.
+
+=item *
+
--jobs I<jobs>
=item *
-j I<jobs>
-Number of C<make> jobs to run in parallel. If F</proc/cpuinfo> exists and
-can be parsed, or F</sbin/sysctl> exists and reports C<hw.ncpu>, or
-F</usr/bin/getconf> exists and reports C<_NPROCESSORS_ONLN> defaults to 1 +
-I<number of CPUs>. Otherwise defaults to 2.
+Number of C<make> jobs to run in parallel. A value of 0 suppresses
+parallelism. If F</proc/cpuinfo> exists and can be parsed, or F</sbin/sysctl>
+exists and reports C<hw.ncpu>, or F</usr/bin/getconf> exists and reports
+C<_NPROCESSORS_ONLN> defaults to 1 + I<number of CPUs>. On HP-UX with the
+system make defaults to 0, otherwise defaults to 2.
=item *
--match pattern
-Instead of running a test program to determine I<pass> or I<fail>, pass
-if the given regex matches, and hence search for the commit that removes
-the last matching file.
+=item *
+
+--no-match pattern
+
+Instead of running a test program to determine I<pass> or I<fail>,
+C<--match> will pass if the given regex matches, and hence search for the
+commit that removes the last matching file. C<--no-match> inverts the test,
+to search for the first commit that adds files that match.
+
+The remaining command line arguments are treated as glob patterns for files
+to match against. If none are specified, then they default as follows:
+
+=over 4
+
+=item *
If no I<target> is specified, the match is against all files in the
-repository (which is fast). If a I<target> is specified, that target is
-built, and the match is against only the built files. C<--expect-fail> can
-be used with C<--match> to search for a commit that adds files that match.
+repository (which is fast).
+
+=item *
+
+If a I<target> is specified, that target is built, and the match is against
+only the built files.
+
+=back
+
+Treating the command line arguments as glob patterns should not cause
+problems, as the perl distribution has never shipped or built files with
+names that contain characters which are globbing metacharacters.
+
+Anything which is not a readable file is ignored, instead of generating an
+error. (If you want an error, run C<grep> or C<ack> as a test case). This
+permits one to easily search in a file that changed its name. For example:
+
+ .../Porting/bisect.pl --match 'Pod.*Functions' 'pod/buildtoc*'
+
+C<--no-match ...> is implemented as C<--expect-fail --match ...>
=item *
=item *
+--all-fixups
+
+F<bisect-runner.pl> will minimally patch various files on a platform and
+version dependent basis to get the build to complete. Normally it defers
+doing this as long as possible - C<.SH> files aren't patched until after
+F<Configure> is run, and C<C> and C<XS> code isn't patched until after
+F<miniperl> is built. If C<--all-fixups> is specified, all the fixups are
+done before running C<Configure>. In rare cases adding this may cause a
+bisect to abort, because an inapplicable patch or other fixup is attempted
+for a revision which would usually have already I<skip>ed. If this happens,
+please report it as a bug, giving the OS and problem revision.
+
+=item *
+
--no-clean
Tell F<bisect-runner.pl> not to clean up after the build. This allows one
--validate
Test that all stable revisions can be built. By default, attempts to build
-I<blead>, I<v5.14.0> .. I<perl-5.002>. Stops at the first failure, without
+I<blead>, I<v5.14.0> .. I<perl-5.002> (or I<perl5.005> on a case insensitive
+file system). Stops at the first failure, without
cleaning the checkout. Use I<--start> to specify the earliest revision to
test, I<--end> to specify the most recent. Useful for validating a new
OS/CPU/compiler combination. For example
- ../perl/Porting/bisect.pl --validate -e'print "Hello from $]\n"'
+ ../perl/Porting/bisect.pl --validate -le 'print "Hello from $]"'
+
+If no testcase is specified, the default is to use F<t/TEST> to run
+F<t/base/*.t>
=item *
=item *
+--check-shebang
+
+Validate that the test case isn't an executable file with a
+C<#!/usr/bin/perl> line (or similar). As F<bisect-runner.pl> does B<not>
+prepend C<./perl> to the test case, a I<#!> line specifying an external
+F<perl> binary will cause the test case to always run with I<that> F<perl>,
+not the F<perl> built by the bisect runner. Likely this is not what you
+wanted. If your test case is actually a wrapper script to run other
+commands, you should run it with an explicit interpreter, to be clear. For
+example, instead of C<../perl/Porting/bisect.pl ~/test/testcase.pl> you'd
+run C<../perl/Porting/bisect.pl /usr/bin/perl ~/test/testcase.pl>
+
+=item *
+
--usage
=item *
=cut
-die "$0: Can't build $target" if defined $target && !grep {@targets} $target;
+# Ensure we always exit with 255, to cause git bisect to abort.
+sub croak_255 {
+ my $message = join '', @_;
+ if ($message =~ /\n\z/) {
+ print STDERR $message;
+ } else {
+ my (undef, $file, $line) = caller 1;
+ print STDERR "@_ at $file line $line\n";
+ }
+ exit 255;
+}
-$j = "-j$j" if $j =~ /\A\d+\z/;
+sub die_255 {
+ croak_255(@_);
+}
+
+die_255("$0: Can't build $target")
+ if defined $target && !grep {@targets} $target;
+
+unless (exists $defines{cc}) {
+ # If it fails, the heuristic of 63f9ec3008baf7d6 is noisy, and hence
+ # confusing.
+ # FIXME - really it should be replaced with a proper test of
+ # "can we build something?" and a helpful diagnostic if we can't.
+ # For now, simply move it here.
+ $defines{cc} = (`ccache -V`, $?) ? 'cc' : 'ccache cc';
+}
+
+my $j = $options{jobs} ? "-j$options{jobs}" : '';
+
+if (exists $options{make}) {
+ if (!exists $defines{make}) {
+ $defines{make} = $options{make};
+ }
+} else {
+ $options{make} = 'make';
+}
# Sadly, however hard we try, I don't think that it will be possible to build
# modules in ext/ on x86_64 Linux before commit e1666bf5602ae794 on 1999/12/29,
sub open_or_die {
my $file = shift;
my $mode = @_ ? shift : '<';
- open my $fh, $mode, $file or croak("Can't open $file: $!");
+ open my $fh, $mode, $file or croak_255("Can't open $file: $!");
${*$fh{SCALAR}} = $file;
return $fh;
}
sub close_or_die {
my $fh = shift;
return if close $fh;
- croak("Can't close: $!") unless ref $fh eq 'GLOB';
- croak("Can't close ${*$fh{SCALAR}}: $!");
+ croak_255("Can't close: $!") unless ref $fh eq 'GLOB';
+ croak_255("Can't close ${*$fh{SCALAR}}: $!");
+}
+
+sub system_or_die {
+ my $command = '</dev/null ' . shift;
+ system($command) and croak_255("'$command' failed, \$!=$!, \$?=$?");
}
sub extract_from_file {
local $/;
my $fh = open_or_die($file);
my $orig = <$fh>;
- die "Can't read $file: $!" unless defined $orig && close $fh;
+ die_255("Can't read $file: $!") unless defined $orig && close $fh;
my $new = $munger->($orig);
return if $new eq $orig;
$fh = open_or_die($file, '>');
- print $fh $new or die "Can't print to $file: $!";
+ print $fh $new or die_255("Can't print to $file: $!");
close_or_die($fh);
}
-sub apply_patch {
- my $patch = shift;
+# AIX supplies a pre-historic patch program, which certainly predates Linux
+# and is probably older than NT. It can't cope with unified diffs. Meanwhile,
+# it's hard enough to get git diff to output context diffs, let alone git show,
+# and nearly all the patches embedded here are unified. So it seems that the
+# path of least resistance is to convert unified diffs to context diffs:
+
+sub process_hunk {
+ my ($from_out, $to_out, $has_from, $has_to, $delete, $add) = @_;
+ ++$$has_from if $delete;
+ ++$$has_to if $add;
+
+ if ($delete && $add) {
+ $$from_out .= "! $_\n" foreach @$delete;
+ $$to_out .= "! $_\n" foreach @$add;
+ } elsif ($delete) {
+ $$from_out .= "- $_\n" foreach @$delete;
+ } elsif ($add) {
+ $$to_out .= "+ $_\n" foreach @$add;
+ }
+}
+
+# This isn't quite general purpose, as it can't cope with
+# '\ No newline at end of file'
+sub ud2cd {
+ my $diff_in = shift;
+ my $diff_out = '';
+
+ # Stuff before the diff
+ while ($diff_in =~ s/\A(?!\*\*\* )(?!--- )([^\n]*\n?)//ms && length $1) {
+ $diff_out .= $1;
+ }
+
+ if (!length $diff_in) {
+ die_255("That didn't seem to be a diff");
+ }
+
+ if ($diff_in =~ /\A\*\*\* /ms) {
+ warn "Seems to be a context diff already\n";
+ return $diff_out . $diff_in;
+ }
- my ($file) = $patch =~ qr!^--- a/(\S+)\n\+\+\+ b/\1!sm;
- open my $fh, '|-', 'patch', '-p1' or die "Can't run patch: $!";
- print $fh $patch;
+ # Loop for files
+ FILE: while (1) {
+ if ($diff_in =~ s/\A((?:diff |index )[^\n]+\n)//ms) {
+ $diff_out .= $1;
+ next;
+ }
+ if ($diff_in !~ /\A--- /ms) {
+ # Stuff after the diff;
+ return $diff_out . $diff_in;
+ }
+ $diff_in =~ s/\A([^\n]+\n?)//ms;
+ my $line = $1;
+ die_255("Can't parse '$line'") unless $line =~ s/\A--- /*** /ms;
+ $diff_out .= $line;
+ $diff_in =~ s/\A([^\n]+\n?)//ms;
+ $line = $1;
+ die_255("Can't parse '$line'") unless $line =~ s/\A\+\+\+ /--- /ms;
+ $diff_out .= $line;
+
+ # Loop for hunks
+ while (1) {
+ next FILE
+ unless $diff_in =~ s/\A\@\@ (-([0-9]+),([0-9]+) \+([0-9]+),([0-9]+)) \@\@[^\n]*\n?//;
+ my ($hunk, $from_start, $from_count, $to_start, $to_count)
+ = ($1, $2, $3, $4, $5);
+ my $from_end = $from_start + $from_count - 1;
+ my $to_end = $to_start + $to_count - 1;
+ my ($from_out, $to_out, $has_from, $has_to, $add, $delete);
+ while (length $diff_in && ($from_count || $to_count)) {
+ die_255("Confused in $hunk")
+ unless $diff_in =~ s/\A([^\n]*)\n//ms;
+ my $line = $1;
+ $line = ' ' unless length $line;
+ if ($line =~ /^ .*/) {
+ process_hunk(\$from_out, \$to_out, \$has_from, \$has_to,
+ $delete, $add);
+ undef $delete;
+ undef $add;
+ $from_out .= " $line\n";
+ $to_out .= " $line\n";
+ --$from_count;
+ --$to_count;
+ } elsif ($line =~ /^-(.*)/) {
+ push @$delete, $1;
+ --$from_count;
+ } elsif ($line =~ /^\+(.*)/) {
+ push @$add, $1;
+ --$to_count;
+ } else {
+ die_255("Can't parse '$line' as part of hunk $hunk");
+ }
+ }
+ process_hunk(\$from_out, \$to_out, \$has_from, \$has_to,
+ $delete, $add);
+ die_255("No lines in hunk $hunk")
+ unless length $from_out || length $to_out;
+ die_255("No changes in hunk $hunk")
+ unless $has_from || $has_to;
+ $diff_out .= "***************\n";
+ $diff_out .= "*** $from_start,$from_end ****\n";
+ $diff_out .= $from_out if $has_from;
+ $diff_out .= "--- $to_start,$to_end ----\n";
+ $diff_out .= $to_out if $has_to;
+ }
+ }
+}
+
+{
+ my $use_context;
+
+ sub placate_patch_prog {
+ my $patch = shift;
+
+ if (!defined $use_context) {
+ my $version = `patch -v 2>&1`;
+ die_255("Can't run `patch -v`, \$?=$?, bailing out")
+ unless defined $version;
+ if ($version =~ /Free Software Foundation/) {
+ $use_context = 0;
+ } elsif ($version =~ /Header: patch\.c,v.*\blwall\b/) {
+ # The system patch is older than Linux, and probably older than
+ # Windows NT.
+ $use_context = 1;
+ } elsif ($version =~ /Header: patch\.c,v.*\babhinav\b/) {
+ # Thank you HP. No, we have no idea *which* version this is:
+ # $Header: patch.c,v 76.1.1.2.1.3 2001/12/03 12:24:52 abhinav Exp $
+ $use_context = 1;
+ } else {
+ # Don't know.
+ $use_context = 0;
+ }
+ }
+
+ return $use_context ? ud2cd($patch) : $patch;
+ }
+}
+
+sub apply_patch {
+ my ($patch, $what, $files) = @_;
+ $what = 'patch' unless defined $what;
+ unless (defined $files) {
+ $patch =~ m!^--- a/(\S+)\n\+\+\+ b/\1!sm;
+ $files = " $1";
+ }
+ my $patch_to_use = placate_patch_prog($patch);
+ open my $fh, '|-', 'patch', '-p1' or die_255("Can't run patch: $!");
+ print $fh $patch_to_use;
return if close $fh;
print STDERR "Patch is <<'EOPATCH'\n${patch}EOPATCH\n";
- die "Can't patch $file: $?, $!";
+ print STDERR "\nConverted to a context diff <<'EOCONTEXT'\n${patch_to_use}EOCONTEXT\n"
+ if $patch_to_use ne $patch;
+ die_255("Can't $what$files: $?, $!");
}
sub apply_commit {
my ($commit, @files) = @_;
- return unless system "git show $commit @files | patch -p1";
- die "Can't apply commit $commit to @files" if @files;
- die "Can't apply commit $commit";
+ my $patch = `git show $commit @files`;
+ if (!defined $patch) {
+ die_255("Can't get commit $commit for @files: $?") if @files;
+ die_255("Can't get commit $commit: $?");
+ }
+ apply_patch($patch, "patch $commit", @files ? " for @files" : '');
}
sub revert_commit {
my ($commit, @files) = @_;
- return unless system "git show -R $commit @files | patch -p1";
- die "Can't apply revert $commit from @files" if @files;
- die "Can't apply revert $commit";
+ my $patch = `git show -R $commit @files`;
+ if (!defined $patch) {
+ die_255("Can't get revert commit $commit for @files: $?") if @files;
+ die_255("Can't get revert commit $commit: $?");
+ }
+ apply_patch($patch, "revert $commit", @files ? " for @files" : '');
}
sub checkout_file {
my ($file, $commit) = @_;
$commit ||= 'blead';
system "git show $commit:$file > $file </dev/null"
- and die "Could not extract $file at revision $commit";
+ and die_255("Could not extract $file at revision $commit");
+}
+
+sub check_shebang {
+ my $file = shift;
+ return unless -e $file;
+ if (!-x $file) {
+ die_255("$file is not executable.
+system($file, ...) is always going to fail.
+
+Bailing out");
+ }
+ my $fh = open_or_die($file);
+ my $line = <$fh>;
+ return unless $line =~ m{\A#!(/\S+/perl\S*)\s};
+ die_255("$file will always be run by $1
+It won't be tested by the ./perl we build.
+If you intended to run it with that perl binary, please change your
+test case to
+
+ $1 @ARGV
+
+If you intended to test it with the ./perl we build, please change your
+test case to
+
+ ./perl -Ilib @ARGV
+
+[You may also need to add -- before ./perl to prevent that -Ilib as being
+parsed as an argument to bisect.pl]
+
+Bailing out");
}
sub clean {
}
sub match_and_exit {
- my $target = shift;
+ my ($target, @globs) = @_;
my $matches = 0;
my $re = qr/$match/;
my @files;
- {
+ if (@globs) {
+ require File::Glob;
+ foreach (sort map { File::Glob::bsd_glob($_)} @globs) {
+ if (!-f $_ || !-r _) {
+ warn "Skipping matching '$_' as it is not a readable file\n";
+ } else {
+ push @files, $_;
+ }
+ }
+ } else {
local $/ = "\0";
@files = defined $target ? `git ls-files -o -z`: `git ls-files -z`;
chomp @files;
}
# Not going to assume that system perl is yet new enough to have autodie
-system 'git clean -dxf </dev/null' and die;
+system_or_die('git clean -dxf');
if (!defined $target) {
- match_and_exit() if $match;
+ match_and_exit(undef, @ARGV) if $match;
$target = 'test_prep';
}
skip('no Configure - is this the //depot/perlext/Compiler branch?')
unless -f 'Configure';
+my $case_insensitive;
+{
+ my ($dev_C, $ino_C) = stat 'Configure';
+ die_255("Could not stat Configure: $!") unless defined $dev_C;
+ my ($dev_c, $ino_c) = stat 'configure';
+ ++$case_insensitive
+ if defined $dev_c && $dev_C == $dev_c && $ino_C == $ino_c;
+}
+
# This changes to PERL_VERSION in 4d8076ea25903dcb in 1999
my $major
= extract_from_file('patchlevel.h',
patch_Configure();
patch_hints();
+if ($options{'all-fixups'}) {
+ patch_SH();
+ patch_C();
+ patch_ext();
+}
# if Encode is not needed for the test, you can speed up the bisect by
# excluding it from the runs with -Dnoextensions=Encode
# bail out pretty early on. Configure won't let us override libswanted, but it
# will let us override the entire libs list.
+foreach (@{$options{A}}) {
+ push @paths, $1 if /^libpth=(.*)/s;
+}
+
unless (extract_from_file('Configure', 'ignore_versioned_solibs')) {
# Before 1cfa4ec74d4933da, so force the libs list.
foreach my $lib (qw(sfio socket inet nsl nm ndbm gdbm dbm db malloc dl dld
ld sun m crypt sec util c cposix posix ucb BSD)) {
foreach my $dir (@paths) {
- next unless -f "$dir/lib$lib.so";
+ # Note the wonderful consistency of dot-or-not in the config vars:
+ next unless -f "$dir/lib$lib.$Config{dlext}"
+ || -f "$dir/lib$lib$Config{lib_ext}";
push @libs, "-l$lib";
last;
}
# </dev/null because it seems that some earlier versions of Configure can
# call commands in a way that now has them reading from stdin (and hanging)
my $pid = fork;
-die "Can't fork: $!" unless defined $pid;
+die_255("Can't fork: $!") unless defined $pid;
if (!$pid) {
open STDIN, '<', '/dev/null';
# If a file in MANIFEST is missing, Configure asks if you want to
# continue (the default being 'n'). With stdin closed or /dev/null,
# it exits immediately and the check for config.sh below will skip.
+ no warnings; # Don't tell me "statement unlikely to be reached". I know.
exec './Configure', @ARGS;
- die "Failed to start Configure: $!";
+ die_255("Failed to start Configure: $!");
}
waitpid $pid, 0
- or die "wait for Configure, pid $pid failed: $!";
+ or die_255("wait for Configure, pid $pid failed: $!");
-patch_SH();
+patch_SH() unless $options{'all-fixups'};
if (-f 'config.sh') {
# Emulate noextensions if Configure doesn't support it.
fake_noextensions()
if $major < 10 && $defines{noextensions};
- system './Configure -S </dev/null' and die;
+ system_or_die('./Configure -S');
}
if ($target =~ /config\.s?h/) {
- match_and_exit($target) if $match && -f $target;
+ match_and_exit($target, @ARGV) if $match && -f $target;
report_and_exit(!-f $target, 'could build', 'could not build', $target)
if $options{'test-build'};
+ skip("could not build $target") unless -f $target;
+
my $ret = system @ARGV;
report_and_exit($ret, 'zero exit from', 'non-zero exit from', "@ARGV");
} elsif (!-f 'config.sh') {
&& extract_from_file('Makefile', qr/\bregen_headers\b/)) {
# regen_headers was added in e50aee73b3d4c555, patch.1m for perl5.001
# It's not worth faking it for earlier revisions.
- system "make regen_headers </dev/null"
- and die;
+ system_or_die('make regen_headers');
}
-patch_C();
-patch_ext();
+unless ($options{'all-fixups'}) {
+ patch_C();
+ patch_ext();
+}
# Parallel build for miniperl is safe
-system "make $j miniperl </dev/null";
+system "$options{make} $j miniperl </dev/null";
-my $expected = $target =~ /^test/ ? 't/perl'
+# This is the file we expect make to create
+my $expected_file = $target =~ /^test/ ? 't/perl'
: $target eq 'Fcntl' ? "lib/auto/Fcntl/Fcntl.$Config{so}"
: $target;
-my $real_target = $target eq 'Fcntl' ? $expected : $target;
+# This is the target we tell make to build in order to get $expected_file
+my $real_target = $target eq 'Fcntl' ? $expected_file : $target;
if ($target ne 'miniperl') {
# Nearly all parallel build issues fixed by 5.10.0. Untrustworthy before that.
}
}
- system "make $j $real_target </dev/null";
+ system "$options{make} $j $real_target </dev/null";
}
-my $missing_target = $expected =~ /perl$/ ? !-x $expected : !-r $expected;
+my $expected_file_found = $expected_file =~ /perl$/
+ ? -x $expected_file : -r $expected_file;
+
+if ($expected_file_found && $expected_file eq 't/perl') {
+ # Check that it isn't actually pointing to ../miniperl, which will happen
+ # if the sanity check ./miniperl -Ilib -MExporter -e '<?>' fails, and
+ # Makefile tries to run minitest.
+
+ # Of course, helpfully sometimes it's called ../perl, other times .././perl
+ # and who knows if that list is exhaustive...
+ my ($dev0, $ino0) = stat 't/perl';
+ my ($dev1, $ino1) = stat 'perl';
+ unless (defined $dev0 && defined $dev1 && $dev0 == $dev1 && $ino0 == $ino1) {
+ undef $expected_file_found;
+ my $link = readlink $expected_file;
+ warn "'t/perl' => '$link', not 'perl'";
+ die_255("Could not realink t/perl: $!") unless defined $link;
+ }
+}
if ($options{'test-build'}) {
- report_and_exit($missing_target, 'could build', 'could not build',
+ report_and_exit(!$expected_file_found, 'could build', 'could not build',
$real_target);
-} elsif ($missing_target) {
+} elsif (!$expected_file_found) {
skip("could not build $real_target");
}
-match_and_exit($real_target) if $match;
+match_and_exit($real_target, @ARGV) if $match;
if (defined $options{'one-liner'}) {
my $exe = $target =~ /^(?:perl$|test)/ ? 'perl' : 'miniperl';
- unshift @ARGV, "./$exe", '-Ilib', '-e', $options{'one-liner'};
+ unshift @ARGV, '-e', $options{'one-liner'};
+ foreach (qw(c l w)) {
+ unshift @ARGV, "-$_" if $options{$_};
+ }
+ unshift @ARGV, "./$exe", '-Ilib';
}
# This is what we came here to run:
while (@parts) {
$path .= '/' . shift @parts;
next if -d $path;
- mkdir $path, 0700 or die "Can't create $path: $!";
+ mkdir $path, 0700 or die_255("Can't create $path: $!");
unshift @created_dirs, $path;
}
$fh = open_or_die($pathname, '>');
close_or_die($fh);
- chmod 0, $pathname or die "Can't chmod 0 $pathname: $!";
+ chmod 0, $pathname or die_255("Can't chmod 0 $pathname: $!");
}
return \@missing, \@created_dirs;
}
push @errors,
"Added file $file had sized changed by Configure to $size";
}
- unlink $file or die "Can't unlink $file: $!";
+ unlink $file or die_255("Can't unlink $file: $!");
}
foreach my $dir (@$created_dirs) {
- rmdir $dir or die "Can't rmdir $dir: $!";
+ rmdir $dir or die_255("Can't rmdir $dir: $!");
}
skip("@errors")
if @errors;
my $mips = extract_from_file('Configure',
qr!(''\) if (?:\./)?mips; then)!);
# This is part of perl-5.001n. It's needed, to add -L/usr/local/lib to
- # theld flags if libraries are found there. It shifts the code to set up
- # libpth earlier, and then adds the code to add libpth entries to
+ # the ld flags if libraries are found there. It shifts the code to set
+ # up libpth earlier, and then adds the code to add libpth entries to
# ldflags
# mips was changed to ./mips in ecfc54246c2a6f42, perl5.000 patch.0g
apply_patch(sprintf <<'EOPATCH', $mips);
edit_file('Configure', sub {
my $code = shift;
$code =~ s/(optstr = ")([^"]+";\s*# getopt-style specification)/$1A:$2/
- or die "Substitution failed";
+ or die_255("Substitution failed");
$code =~ s!^(: who configured the system)!
touch posthint.sh
. ./posthint.sh
$1!ms
- or die "Substitution failed";
+ or die_255("Substitution failed");
return $code;
});
apply_patch(<<'EOPATCH');
EOPATCH
}
+ if ($major < 8 && $^O eq 'aix') {
+ edit_file('Configure', sub {
+ my $code = shift;
+ # Replicate commit a8c676c69574838b
+ # Whitespace allowed at the ends of /lib/syscalls.exp lines
+ # and half of commit c6912327ae30e6de
+ # AIX syscalls.exp scan: the syscall might be marked 32, 3264, or 64
+ $code =~ s{(\bsed\b.*\bsyscall)(?:\[0-9\]\*)?(\$.*/lib/syscalls\.exp)}
+ {$1 . "[0-9]*[ \t]*" . $2}e;
+ return $code;
+ });
+ }
+
if ($major < 8 && !extract_from_file('Configure',
qr/^\t\tif test ! -t 0; then$/)) {
# Before dfe9444ca7881e71, Configure would refuse to run if stdin was
EOC
$code =~ s/\n: is a C symbol defined\?\n.*?\neval "\$2=\$tval"'\n\n/$fixed/sm
- or die "substitution failed";
+ or die_255("substitution failed");
return $code;
});
}
# to 5.002, lets just turn it off.
$code =~ s/^useshrplib='true'/useshrplib='false'/m
if $faking_it;
+
+ # Part of commit d235852b65d51c44
+ # Don't do this on a case sensitive HFS+ partition, as it
+ # breaks the build for 5.003 and earlier.
+ if ($case_insensitive
+ && $code !~ /^firstmakefile=GNUmakefile/) {
+ $code .= "\nfirstmakefile=GNUmakefile;\n";
+ }
+
return $code;
});
}
cccdlflags="-DPIC -fPIC $cccdlflags"
lddlflags="--whole-archive -shared $lddlflags"
elif [ "`uname -m`" = "pmax" ]; then
-# NetBSD 1.3 and 1.3.1 on pmax shipped an `old' ld.so, which will not work.
+# NetBSD 1.3 and 1.3.1 on pmax shipped an 'old' ld.so, which will not work.
d_dlopen=$undef
elif [ -f /usr/libexec/ld.so ]; then
d_dlopen=$define
} elsif(!extract_from_file('hints/linux.sh',
qr/^sparc-linux\)$/)) {
my $fh = open_or_die('hints/linux.sh', '>>');
- print $fh <<'EOT' or die $!;
+ print $fh <<'EOT' or die_255($!);
case "`uname -m`" in
sparc*)
EOPATCH
}
+
+ if ($major == 11) {
+ if (extract_from_file('patchlevel.h',
+ qr/^#include "unpushed\.h"/)) {
+ # I had thought it easier to detect when building one of the 52
+ # commits with the original method of incorporating the git
+ # revision and drop parallel make flags. Commits shown by
+ # git log 46807d8e809cc127^..dcff826f70bf3f64^ ^d4fb0a1f15d1a1c4
+ # However, it's not actually possible to make miniperl for that
+ # configuration as-is, because the file .patchnum is only made
+ # as a side effect of target 'all'
+ # I also don't think that it's "safe" to simply run
+ # make_patchnum.sh before the build. We need the proper
+ # dependency rules in the Makefile to *stop* it being run again
+ # at the wrong time.
+ # This range is important because contains the commit that
+ # merges Schwern's y2038 work.
+ apply_patch(<<'EOPATCH');
+diff --git a/Makefile.SH b/Makefile.SH
+index 9ad8b6f..106e721 100644
+--- a/Makefile.SH
++++ b/Makefile.SH
+@@ -540,9 +544,14 @@ sperl.i: perl.c $(h)
+
+ .PHONY: all translators utilities make_patchnum
+
+-make_patchnum:
++make_patchnum: lib/Config_git.pl
++
++lib/Config_git.pl: make_patchnum.sh
+ sh $(shellflags) make_patchnum.sh
+
++# .patchnum, unpushed.h and lib/Config_git.pl are built by make_patchnum.sh
++unpushed.h .patchnum: lib/Config_git.pl
++
+ # make sure that we recompile perl.c if .patchnum changes
+ perl$(OBJ_EXT): .patchnum unpushed.h
+
+EOPATCH
+ } elsif (-f '.gitignore'
+ && extract_from_file('.gitignore', qr/^\.patchnum$/)) {
+ # 8565263ab8a47cda to 46807d8e809cc127^ inclusive.
+ edit_file('Makefile.SH', sub {
+ my $code = shift;
+ $code =~ s/^make_patchnum:\n/make_patchnum: .patchnum
+
+.sha1: .patchnum
+
+.patchnum: make_patchnum.sh
+/m;
+ return $code;
+ });
+ } elsif (-f 'lib/.gitignore'
+ && extract_from_file('lib/.gitignore',
+ qr!^/Config_git.pl!)
+ && !extract_from_file('Makefile.SH',
+ qr/^uudmap\.h.*:bitcount.h$/)) {
+ # Between commits and dcff826f70bf3f64 and 0f13ebd5d71f8177^
+ edit_file('Makefile.SH', sub {
+ my $code = shift;
+ # Bug introduced by 344af494c35a9f0f
+ # fixed in 0f13ebd5d71f8177
+ $code =~ s{^(pod/perlapi\.pod) (pod/perlintern\.pod): }
+ {$1: $2\n\n$2: }m;
+ # Bug introduced by efa50c51e3301a2c
+ # fixed in 0f13ebd5d71f8177
+ $code =~ s{^(uudmap\.h) (bitcount\.h): }
+ {$1: $2\n\n$2: }m;
+
+ # The rats nest of getting git_version.h correct
+
+ if ($code =~ s{git_version\.h: stock_git_version\.h
+\tcp stock_git_version\.h git_version\.h}
+ {}m) {
+ # before 486cd780047ff224
+
+ # We probably can't build between
+ # 953f6acfa20ec275^ and 8565263ab8a47cda
+ # inclusive, but all commits in that range
+ # relate to getting make_patchnum.sh working,
+ # so it is extremely unlikely to be an
+ # interesting bisect target. They will skip.
+
+ # No, don't spawn a submake if
+ # make_patchnum.sh or make_patchnum.pl fails
+ $code =~ s{\|\| \$\(MAKE\) miniperl.*}
+ {}m;
+ $code =~ s{^\t(sh.*make_patchnum\.sh.*)}
+ {\t-$1}m;
+
+ # Use an external perl to run make_patchnum.pl
+ # because miniperl still depends on
+ # git_version.h
+ $code =~ s{^\t.*make_patchnum\.pl}
+ {\t-$^X make_patchnum.pl}m;
+
+
+ # "Truth in advertising" - running
+ # make_patchnum generates 2 files.
+ $code =~ s{^make_patchnum:.*}{
+make_patchnum: lib/Config_git.pl
+
+git_version.h: lib/Config_git.pl
+
+perlmini\$(OBJ_EXT): git_version.h
+
+lib/Config_git.pl:}m;
+ }
+ # Right, now we've corrected Makefile.SH to
+ # correctly describe how lib/Config_git.pl and
+ # git_version.h are made, we need to fix the rest
+
+ # This emulates commit 2b63e250843b907e
+ # This might duplicate the rule stating that
+ # git_version.h depends on lib/Config_git.pl
+ # This is harmless.
+ $code =~ s{^(?:lib/Config_git\.pl )?git_version\.h: (.* make_patchnum\.pl.*)}
+ {git_version.h: lib/Config_git.pl
+
+lib/Config_git.pl: $1}m;
+
+ # This emulates commits 0f13ebd5d71f8177 and
+ # and a04d4598adc57886. It ensures that
+ # lib/Config_git.pl is built before configpm,
+ # and that configpm is run exactly once.
+ $code =~ s{^(\$\(.*?\) )?(\$\(CONFIGPOD\))(: .*? configpm Porting/Glossary)( lib/Config_git\.pl)?}{
+ # If present, other files depend on $(CONFIGPOD)
+ ($1 ? "$1: $2\n\n" : '')
+ # Then the rule we found
+ . $2 . $3
+ # Add dependency if not there
+ . ($4 ? $4 : ' lib/Config_git.pl')
+ }me;
+
+ return $code;
+ });
+ }
+ }
+
if ($major < 14) {
# Commits dc0655f797469c47 and d11a62fe01f2ecb2
edit_file('Makefile.SH', sub {
}
}
+ if ($^O eq 'aix' && $major >= 11 && $major <= 15
+ && extract_from_file('makedef.pl', qr/^use Config/)) {
+ edit_file('Makefile.SH', sub {
+ # The AIX part of commit e6807d8ab22b761c
+ # It's safe to substitute lib/Config.pm for config.sh
+ # as lib/Config.pm depends on config.sh
+ # If the tree is post e6807d8ab22b761c, the substitution
+ # won't match, which is harmless.
+ my $code = shift;
+ $code =~ s{^(perl\.exp:.* )config\.sh(\b.*)}
+ {$1 . '$(CONFIGPM)' . $2}me;
+ return $code;
+ });
+ }
+
# There was a bug in makedepend.SH which was fixed in version 96a8704c.
# Symptom was './makedepend: 1: Syntax error: Unterminated quoted string'
# Remove this if you're actually bisecting a problem related to
}
}
+ if ($major < 4 && $^O eq 'hpux'
+ && extract_from_file('sv.c', qr/i = _filbuf\(/)) {
+ apply_patch(<<'EOPATCH');
+diff --git a/sv.c b/sv.c
+index a1f1d60..0a806f1 100644
+--- a/sv.c
++++ b/sv.c
+@@ -2641,7 +2641,7 @@ I32 append;
+
+ FILE_cnt(fp) = cnt; /* deregisterize cnt and ptr */
+ FILE_ptr(fp) = ptr;
+- i = _filbuf(fp); /* get more characters */
++ i = __filbuf(fp); /* get more characters */
+ cnt = FILE_cnt(fp);
+ ptr = FILE_ptr(fp); /* reregisterize cnt and ptr */
+
+
+EOPATCH
+ }
+
if ($major == 4 && extract_from_file('scope.c', qr/\(SV\*\)SSPOPINT/)) {
# [PATCH] 5.004_04 +MAINT_TRIAL_1 broken when sizeof(int) != sizeof(void)
# Fixes a bug introduced in 161b7d1635bc830b
apply_commit('e1c148c28bf3335b', 'av.c');
}
- if ($major == 4 && !extract_from_file('perl.c', qr/delimcpy.*,$/)) {
- # bug introduced in 2a92aaa05aa1acbf, fixed in 8490252049bf42d3
- apply_patch(<<'EOPATCH');
+ if ($major == 4) {
+ my $rest = extract_from_file('perl.c', qr/delimcpy(.*)/);
+ if (defined $rest and $rest !~ /,$/) {
+ # delimcpy added in fc36a67e8855d031, perl.c refactored to use it.
+ # bug introduced in 2a92aaa05aa1acbf, fixed in 8490252049bf42d3
+ # code then moved to util.c in commit 491527d0220de34e
+ apply_patch(<<'EOPATCH');
diff --git a/perl.c b/perl.c
index 4eb69e3..54bbb00 100644
--- a/perl.c
&len);
#endif /* ! (atarist || DOSISH) */
EOPATCH
+ }
}
if ($major == 4 && $^O eq 'linux') {
});
}
+ if ($major < 5 && $^O eq 'aix'
+ && !extract_from_file('pp_sys.c',
+ qr/defined\(HOST_NOT_FOUND\) && !defined\(h_errno\)/)) {
+ # part of commit dc45a647708b6c54
+ # Andy Dougherty's configuration patches (Config_63-01 up to 04).
+ apply_patch(<<'EOPATCH')
+diff --git a/pp_sys.c b/pp_sys.c
+index c2fcb6f..efa39fb 100644
+--- a/pp_sys.c
++++ b/pp_sys.c
+@@ -54,7 +54,7 @@ extern "C" int syscall(unsigned long,...);
+ #endif
+ #endif
+
+-#ifdef HOST_NOT_FOUND
++#if defined(HOST_NOT_FOUND) && !defined(h_errno)
+ extern int h_errno;
+ #endif
+
+EOPATCH
+ }
+
+ if ($major == 5
+ && `git rev-parse HEAD` eq "22c35a8c2392967a5ba6b5370695be464bd7012c\n") {
+ # Commit 22c35a8c2392967a is significant,
+ # "phase 1 of somewhat major rearrangement of PERL_OBJECT stuff"
+ # but doesn't build due to 2 simple errors. blead in this broken state
+ # was merged to the cfgperl branch, and then these were immediately
+ # corrected there. cfgperl (with the fixes) was merged back to blead.
+ # The resultant rather twisty maze of commits looks like this:
+
+=begin comment
+
+* | | commit 137225782c183172f360c827424b9b9f8adbef0e
+|\ \ \ Merge: 22c35a8 2a8ee23
+| |/ / Author: Gurusamy Sarathy <gsar@cpan.org>
+| | | Date: Fri Oct 30 17:38:36 1998 +0000
+| | |
+| | | integrate cfgperl tweaks into mainline
+| | |
+| | | p4raw-id: //depot/perl@2144
+| | |
+| * | commit 2a8ee23279873759693fa83eca279355db2b665c
+| | | Author: Jarkko Hietaniemi <jhi@iki.fi>
+| | | Date: Fri Oct 30 13:27:39 1998 +0000
+| | |
+| | | There can be multiple yacc/bison errors.
+| | |
+| | | p4raw-id: //depot/cfgperl@2143
+| | |
+| * | commit 93fb2ac393172fc3e2c14edb20b718309198abbc
+| | | Author: Jarkko Hietaniemi <jhi@iki.fi>
+| | | Date: Fri Oct 30 13:18:43 1998 +0000
+| | |
+| | | README.posix-bc update.
+| | |
+| | | p4raw-id: //depot/cfgperl@2142
+| | |
+| * | commit 4ec43091e8e6657cb260b5e563df30aaa154effe
+| | | Author: Jarkko Hietaniemi <jhi@iki.fi>
+| | | Date: Fri Oct 30 09:12:59 1998 +0000
+| | |
+| | | #2133 fallout.
+| | |
+| | | p4raw-id: //depot/cfgperl@2141
+| | |
+| * | commit 134ca994cfefe0f613d43505a885e4fc2100b05c
+| |\ \ Merge: 7093112 22c35a8
+| |/ / Author: Jarkko Hietaniemi <jhi@iki.fi>
+|/| | Date: Fri Oct 30 08:43:18 1998 +0000
+| | |
+| | | Integrate from mainperl.
+| | |
+| | | p4raw-id: //depot/cfgperl@2140
+| | |
+* | | commit 22c35a8c2392967a5ba6b5370695be464bd7012c
+| | | Author: Gurusamy Sarathy <gsar@cpan.org>
+| | | Date: Fri Oct 30 02:51:39 1998 +0000
+| | |
+| | | phase 1 of somewhat major rearrangement of PERL_OBJECT stuff
+| | | (objpp.h is gone, embed.pl now does some of that); objXSUB.h
+| | | should soon be automated also; the global variables that
+| | | escaped the PL_foo conversion are now reined in; renamed
+| | | MAGIC in regcomp.h to REG_MAGIC to avoid collision with the
+| | | type of same name; duplicated lists of pp_things in various
+| | | places is now gone; result has only been tested on win32
+| | |
+| | | p4raw-id: //depot/perl@2133
+
+=end comment
+
+=cut
+
+ # and completely confuses git bisect (and at least me), causing it to
+ # the bisect run to confidently return the wrong answer, an unrelated
+ # commit on the cfgperl branch.
+
+ apply_commit('4ec43091e8e6657c');
+ }
+
+ if ($major == 5
+ && extract_from_file('pp_sys.c', qr/PERL_EFF_ACCESS_R_OK/)
+ && !extract_from_file('pp_sys.c', qr/XXX Configure test needed for eaccess/)) {
+ # Between 5ff3f7a4e03a6b10 and c955f1177b2e311d^
+ # This is the meat of commit c955f1177b2e311d (without the other
+ # indenting changes that would cause a conflict).
+ # Without this 538 revisions won't build on (at least) Linux
+ apply_patch(<<'EOPATCH');
+diff --git a/pp_sys.c b/pp_sys.c
+index d60c8dc..867dee4 100644
+--- a/pp_sys.c
++++ b/pp_sys.c
+@@ -198,9 +198,18 @@ static char zero_but_true[ZBTLEN + 1] = "0 but true";
+ # if defined(I_SYS_SECURITY)
+ # include <sys/security.h>
+ # endif
+-# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK, ACC_SELF))
+-# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK, ACC_SELF))
+-# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK, ACC_SELF))
++ /* XXX Configure test needed for eaccess */
++# ifdef ACC_SELF
++ /* HP SecureWare */
++# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK, ACC_SELF))
++# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK, ACC_SELF))
++# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK, ACC_SELF))
++# else
++ /* SCO */
++# define PERL_EFF_ACCESS_R_OK(p) (eaccess((p), R_OK))
++# define PERL_EFF_ACCESS_W_OK(p) (eaccess((p), W_OK))
++# define PERL_EFF_ACCESS_X_OK(p) (eaccess((p), X_OK))
++# endif
+ #endif
+
+ #if !defined(PERL_EFF_ACCESS_R_OK) && defined(HAS_ACCESSX) && defined(ACC_SELF)
+EOPATCH
+ }
+
+ if ($major == 5
+ && extract_from_file('mg.c', qr/If we're still on top of the stack, pop us off/)
+ && !extract_from_file('mg.c', qr/PL_savestack_ix -= popval/)) {
+ # Fix up commit 455ece5e082708b1:
+ # SSNEW() API for allocating memory on the savestack
+ # Message-Id: <tqemtae338.fsf@puma.genscan.com>
+ # Subject: [PATCH 5.005_51] (was: why SAVEDESTRUCTOR()...)
+ apply_commit('3c8a44569607336e', 'mg.c');
+ }
+
+ if ($major == 5) {
+ if (extract_from_file('doop.c', qr/croak\(no_modify\);/)
+ && extract_from_file('doop.c', qr/croak\(PL_no_modify\);/)) {
+ # Whilst the log suggests that this would only fix 5 commits, in
+ # practice this area of history is a complete tarpit, and git bisect
+ # gets very confused by the skips in the middle of the back and
+ # forth merging between //depot/perl and //depot/cfgperl
+ apply_commit('6393042b638dafd3');
+ }
+
+ # One error "fixed" with another:
+ if (extract_from_file('pp_ctl.c',
+ qr/\Qstatic void *docatch_body _((void *o));\E/)) {
+ apply_commit('5b51e982882955fe');
+ }
+ # Which is then fixed by this:
+ if (extract_from_file('pp_ctl.c',
+ qr/\Qstatic void *docatch_body _((valist\E/)) {
+ apply_commit('47aa779ee4c1a50e');
+ }
+
+ if (extract_from_file('thrdvar.h', qr/PERLVARI\(Tprotect/)
+ && !extract_from_file('embedvar.h', qr/PL_protect/)) {
+ # Commit 312caa8e97f1c7ee didn't update embedvar.h
+ apply_commit('e0284a306d2de082', 'embedvar.h');
+ }
+ }
+
+ if ($major == 5
+ && extract_from_file('sv.c',
+ qr/PerlDir_close\(IoDIRP\((?:\(IO\*\))?sv\)\);/)
+ && !(extract_from_file('toke.c',
+ qr/\QIoDIRP(FILTER_DATA(AvFILLp(PL_rsfp_filters))) = NULL\E/)
+ || extract_from_file('toke.c',
+ qr/\QIoDIRP(datasv) = (DIR*)NULL;\E/))) {
+ # Commit 93578b34124e8a3b, //depot/perl@3298
+ # close directory handles properly when localized,
+ # tweaked slightly by commit 1236053a2c722e2b,
+ # add test case for change#3298
+ #
+ # The fix is the last part of:
+ #
+ # various fixes for clean build and test on win32; configpm broken,
+ # needed to open myconfig.SH rather than myconfig; sundry adjustments
+ # to bytecode stuff; tweaks to DYNAMIC_ENV_FETCH code to make it
+ # work under win32; getenv_sv() changed to getenv_len() since SVs
+ # aren't visible in the lower echelons; remove bogus exports from
+ # config.sym; PERL_OBJECT-ness for C++ exception support; null out
+ # IoDIRP in filter_del() or sv_free() will attempt to close it
+ #
+ # The changed code is modified subsequently by commit e0c198038146b7a4
+ apply_commit('a6c403648ecd5cc7', 'toke.c');
+ }
+
if ($major < 6 && $^O eq 'netbsd'
&& !extract_from_file('unixish.h',
qr/defined\(NSIG\).*defined\(__NetBSD__\)/)) {
apply_commit('6695a346c41138df');
}
+ if (-f 'ext/Hash/Util/Makefile.PL'
+ && extract_from_file('ext/Hash/Util/Makefile.PL',
+ qr/\bDIR\b.*'FieldHash'/)) {
+ # ext/Hash/Util/Makefile.PL should not recurse to FieldHash's Makefile.PL
+ # *nix, VMS and Win32 all know how to (and have to) call the latter directly.
+ # As is, targets in ext/Hash/Util/FieldHash get called twice, which may result
+ # in race conditions, and certainly messes up make clean; make distclean;
+ apply_commit('550428fe486b1888');
+ }
+
if ($major < 8 && $^O eq 'darwin' && !-f 'ext/DynaLoader/dl_dyld.xs') {
checkout_file('ext/DynaLoader/dl_dyld.xs', 'f556e5b971932902');
apply_patch(<<'EOPATCH');