* [p.23 of _The Lord of the Rings_, I/i: "A Long-Expected Party"]
*/
-/* XXX DAPM
- * As of Sept 2002, this file is new and may be in a state of flux for
- * a while. I've marked things I intent to come back and look at further
- * with an 'XXX DAPM' comment.
- */
-
/*
=head1 Pad Data Structures
executing). Require'd files are simply evals without any outer lexical
scope.
-XSUBs do not have a CvPADLIST. dXSTARG fetches values from PL_curpad,
+XSUBs do not have a C<CvPADLIST>. C<dXSTARG> fetches values from C<PL_curpad>,
but that is really the callers pad (a slot of which is allocated by
-every entersub). Do not get or set CvPADLIST if a CV is an XSUB (as
-determined by C<CvISXSUB()>), CvPADLIST slot is reused for a different
+every entersub). Do not get or set C<CvPADLIST> if a CV is an XSUB (as
+determined by C<CvISXSUB()>), C<CvPADLIST> slot is reused for a different
internal purpose in XSUBs.
The PADLIST has a C array where pads are stored.
The CvDEPTH'th entry of a PADLIST is a PAD (an AV) which is the stack frame
at that depth of recursion into the CV. The 0th slot of a frame AV is an
-AV which is @_. Other entries are storage for variables and op targets.
+AV which is C<@_>. Other entries are storage for variables and op targets.
Iterating over the PADNAMELIST iterates over all possible pad
-items. Pad slots for targets (SVs_PADTMP)
+items. Pad slots for targets (C<SVs_PADTMP>)
and GVs end up having &PL_padname_undef "names", while slots for constants
-have &PL_padname_const "names" (see pad_alloc()). That &PL_padname_undef
-and &PL_padname_const are used is an implementation detail subject to
-change. To test for them, use C<!PadnamePV(name)> and C<PadnamePV(name)
-&& !PadnameLEN(name)>, respectively.
+have C<&PL_padname_const> "names" (see C<L</pad_alloc>>). That
+C<&PL_padname_undef>
+and C<&PL_padname_const> are used is an implementation detail subject to
+change. To test for them, use C<!PadnamePV(name)> and
+S<C<PadnamePV(name) && !PadnameLEN(name)>>, respectively.
-Only my/our variable slots get valid names.
+Only C<my>/C<our> variable slots get valid names.
The rest are op targets/GVs/constants which are statically allocated
or resolved at compile time. These don't have names by which they
can be looked up from Perl code at run time through eval"" the way
-my/our variables can be. Since they can't be looked up by "name"
+C<my>/C<our> variables can be. Since they can't be looked up by "name"
but only by their index allocated at compile time (which is usually
-in PL_op->op_targ), wasting a name SV for them doesn't make sense.
+in C<PL_op->op_targ>), wasting a name SV for them doesn't make sense.
The pad names in the PADNAMELIST have their PV holding the name of
-the variable. The COP_SEQ_RANGE_LOW and _HIGH fields form a range
+the variable. The C<COP_SEQ_RANGE_LOW> and C<_HIGH> fields form a range
(low+1..high inclusive) of cop_seq numbers for which the name is
valid. During compilation, these fields may hold the special value
PERL_PADSEQ_INTRO to indicate various stages:
- COP_SEQ_RANGE_LOW _HIGH
- ----------------- -----
- PERL_PADSEQ_INTRO 0 variable not yet introduced: { my ($x
- valid-seq# PERL_PADSEQ_INTRO variable in scope: { my ($x)
- valid-seq# valid-seq# compilation of scope complete: { my ($x) }
+ COP_SEQ_RANGE_LOW _HIGH
+ ----------------- -----
+ PERL_PADSEQ_INTRO 0 variable not yet introduced:
+ { my ($x
+ valid-seq# PERL_PADSEQ_INTRO variable in scope:
+ { my ($x);
+ valid-seq# valid-seq# compilation of scope complete:
+ { my ($x); .... }
+
+When a lexical var hasn't yet been introduced, it already exists from the
+perspective of duplicate declarations, but not for variable lookups, e.g.
+
+ my ($x, $x); # '"my" variable $x masks earlier declaration'
+ my $x = $x; # equal to my $x = $::x;
-For typed lexicals PadnameTYPE points at the type stash. For C<our>
-lexicals, PadnameOURSTASH points at the stash of the associated global (so
+For typed lexicals C<PadnameTYPE> points at the type stash. For C<our>
+lexicals, C<PadnameOURSTASH> points at the stash of the associated global (so
that duplicate C<our> declarations in the same package can be detected).
-PadnameGEN is sometimes used to store the generation number during
+C<PadnameGEN> is sometimes used to store the generation number during
compilation.
-If PadnameOUTER is set on the pad name, then that slot in the frame AV
+If C<PadnameOUTER> is set on the pad name, then that slot in the frame AV
is a REFCNT'ed reference to a lexical from "outside". Such entries
are sometimes referred to as 'fake'. In this case, the name does not
use 'low' and 'high' to store a cop_seq range, since it is in scope
within the parent's pad where the lexical's value is stored, to make
cloning quicker.
-If the 'name' is '&' the corresponding entry in the PAD
+If the 'name' is C<&> the corresponding entry in the PAD
is a CV representing a possible closure.
Note that formats are treated as anon subs, and are cloned each time
write is called (if necessary).
-The flag SVs_PADSTALE is cleared on lexicals each time the my() is executed,
+The flag C<SVs_PADSTALE> is cleared on lexicals each time the C<my()> is executed,
and set on scope exit. This allows the
-'Variable $x is not available' warning
+C<"Variable $x is not available"> warning
to be generated in evals, such as
{ my $x = 1; sub f { eval '$x'} } f();
-For state vars, SVs_PADSTALE is overloaded to mean 'not yet initialised',
+For state vars, C<SVs_PADSTALE> is overloaded to mean 'not yet initialised',
but this internal state is stored in a separate pad entry.
=for apidoc AmxU|PADNAMELIST *|PL_comppad_name
# if PTRSIZE == 8
assert((Size_t)padlist != UINT64_C(0xEFEFEFEFEFEFEFEF));
# elif PTRSIZE == 4
- assert((Size_t)padlist != UINT64_C(0xEFEFEFEF));
+ assert((Size_t)padlist != 0xEFEFEFEF);
# else
# error unknown pointer size
# endif
ASSERT_CURPAD_LEGAL("pad_new");
- /* XXX DAPM really need a new SAVEt_PAD which restores all or most
- * vars (based on flags) rather than storing vals + addresses for
- * each individually. Also see pad_block_start.
- * XXX DAPM Try to see whether all these conditionals are required
- */
-
/* save existing state, ... */
if (flags & padnew_SAVE) {
SAVECOMPPAD();
if (! (flags & padnew_CLONE)) {
SAVESPTR(PL_comppad_name);
- SAVEI32(PL_padix);
- SAVEI32(PL_constpadix);
- SAVEI32(PL_comppad_name_fill);
- SAVEI32(PL_min_intro_pending);
- SAVEI32(PL_max_intro_pending);
+ save_strlen((STRLEN *)&PL_padix);
+ save_strlen((STRLEN *)&PL_constpadix);
+ save_strlen((STRLEN *)&PL_comppad_name_fill);
+ save_strlen((STRLEN *)&PL_min_intro_pending);
+ save_strlen((STRLEN *)&PL_max_intro_pending);
SAVEBOOL(PL_cv_has_eval);
if (flags & padnew_SAVESUB) {
SAVEBOOL(PL_pad_reset_pending);
}
}
}
- /* XXX DAPM interestingly, PL_comppad_name_floor never seems to be
- * saved - check at some pt that this is okay */
/* ... create new pad ... */
pad = newAV();
if (flags & padnew_CLONE) {
- /* XXX DAPM I dont know why cv_clone needs it
- * doing differently yet - perhaps this separate branch can be
- * dispensed with eventually ???
- */
-
AV * const a0 = newAV(); /* will be @_ */
av_store(pad, 0, MUTABLE_SV(a0));
AvREIFY_only(a0);
}
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] new: compcv=0x%"UVxf
- " name=0x%"UVxf" flags=0x%"UVxf"\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] new: compcv=0x%" UVxf
+ " name=0x%" UVxf " flags=0x%" UVxf "\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), PTR2UV(PL_compcv),
PTR2UV(padname), (UV)flags
)
Clear out all the active components of a CV. This can happen either
by an explicit C<undef &foo>, or by the reference count going to zero.
-In the former case, we keep the CvOUTSIDE pointer, so that any anonymous
+In the former case, we keep the C<CvOUTSIDE> pointer, so that any anonymous
children can still follow the full lexical scope chain.
=cut
PERL_ARGS_ASSERT_CV_UNDEF_FLAGS;
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "CV undef: cv=0x%"UVxf" comppad=0x%"UVxf"\n",
+ "CV undef: cv=0x%" UVxf " comppad=0x%" UVxf "\n",
PTR2UV(cv), PTR2UV(PL_comppad))
);
pad_peg("pad_undef");
if (!CvISXSUB(&cvbody) && CvPADLIST(&cvbody)) {
- I32 ix;
+ PADOFFSET ix;
const PADLIST *padlist = CvPADLIST(&cvbody);
/* Free the padlist associated with a CV.
subs to the outer of this cv. */
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad undef: cv=0x%"UVxf" padlist=0x%"UVxf" comppad=0x%"UVxf"\n",
+ "Pad undef: cv=0x%" UVxf " padlist=0x%" UVxf " comppad=0x%" UVxf "\n",
PTR2UV(cv), PTR2UV(padlist), PTR2UV(PL_comppad))
);
/* detach any '&' anon children in the pad; if afterwards they
* are still live, fix up their CvOUTSIDEs to point to our outside,
* bypassing us. */
- /* XXX DAPM for efficiency, we should only do this if we know we have
- * children, or integrate this loop with general cleanup */
if (PL_phase != PERL_PHASE_DESTRUCT) { /* don't bother during global destruction */
CV * const outercv = CvOUTSIDE(&cvbody);
if (name && PadnamePV(name) && *PadnamePV(name) == '&')
{
CV * const innercv = MUTABLE_CV(curpad[ix]);
- U32 inner_rc = SvREFCNT(innercv);
- assert(inner_rc);
+ U32 inner_rc;
+ assert(innercv);
assert(SvTYPE(innercv) != SVt_PVFM);
+ inner_rc = SvREFCNT(innercv);
+ assert(inner_rc);
if (SvREFCNT(comppad) < 2) { /* allow for /(?{ sub{} })/ */
curpad[ix] = NULL;
/*
=for apidoc cv_forget_slab
-When a CV has a reference count on its slab (CvSLABBED), it is responsible
+When a CV has a reference count on its slab (C<CvSLABBED>), it is responsible
for making sure it is freed. (Hence, no two CVs should ever have a
reference count on the same slab.) The CV only needs to reference the slab
-during compilation. Once it is compiled and CvROOT attached, it has
+during compilation. Once it is compiled and C<CvROOT> attached, it has
finished its job, so it can forget the slab.
=cut
void
Perl_cv_forget_slab(pTHX_ CV *cv)
{
- const bool slabbed = !!CvSLABBED(cv);
+ bool slabbed;
OPSLAB *slab = NULL;
- PERL_ARGS_ASSERT_CV_FORGET_SLAB;
-
+ if (!cv)
+ return;
+ slabbed = cBOOL(CvSLABBED(cv));
if (!slabbed) return;
CvSLABBED_off(cv);
Allocates a place in the currently-compiling
pad (via L<perlapi/pad_alloc>) and
-then stores a name for that entry. I<name> is adopted and
+then stores a name for that entry. C<name> is adopted and
becomes the name entry; it must already contain the name
-string.
I<typestash> and I<ourstash> and the C<padadd_STATE>
-flag get added to I<name>. None of the other
+string.
C<typestash> and C<ourstash> and the C<padadd_STATE>
+flag get added to C<name>. None of the other
processing of L<perlapi/pad_add_name_pvn>
is done. Returns the offset of the allocated pad slot.
pad, and makes preparations to manage the variable's lexical scoping.
Returns the offset of the allocated pad slot.
-I<namepv>/I<namelen> specify the variable's name, including leading sigil.
-If I<typestash> is non-null, the name is for a typed lexical, and this
-identifies the type. If I<ourstash> is non-null, it's a lexical reference
+C<namepv>/C<namelen> specify the variable's name, including leading sigil.
+If C<typestash> is non-null, the name is for a typed lexical, and this
+identifies the type. If C<ourstash> is non-null, it's a lexical reference
to a package variable, and this identifies the package. The following
flags can be OR'ed together:
- padadd_OUR redundantly specifies if it's a package var
- padadd_STATE variable will retain value persistently
- padadd_NO_DUP_CHECK skip check for lexical shadowing
+ padadd_OUR redundantly specifies if it's a package var
+ padadd_STATE variable will retain value persistently
+ padadd_NO_DUP_CHECK skip check for lexical shadowing
=cut
*/
sv_upgrade(PL_curpad[offset], SVt_PVCV);
assert(SvPADMY(PL_curpad[offset]));
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad addname: %ld \"%s\" new lex=0x%"UVxf"\n",
+ "Pad addname: %ld \"%s\" new lex=0x%" UVxf "\n",
(long)offset, PadnamePV(name),
PTR2UV(PL_curpad[offset])));
Allocates a place in the currently-compiling pad,
returning the offset of the allocated pad slot.
No name is initially attached to the pad slot.
-I<tmptype> is a set of flags indicating the kind of pad entry required,
+C<tmptype> is a set of flags indicating the kind of pad entry required,
which will be set in the value SV for the allocated pad entry:
SVs_PADMY named lexical variable ("my", "our", "state")
tells C<pad_alloc> that it I<will> be made read-only (by the caller), or at
least should be treated as such.
-I<optype> should be an opcode indicating the type of operation that the
+C<optype> should be an opcode indicating the type of operation that the
pad entry is to support. This doesn't affect operational semantics,
but is used for debugging.
=cut
*/
-/* XXX DAPM integrate alloc(), add_name() and add_anon(),
- * or at least rationalise ??? */
-
PADOFFSET
Perl_pad_alloc(pTHX_ I32 optype, U32 tmptype)
{
SV *sv;
- I32 retval;
+ PADOFFSET retval;
PERL_UNUSED_ARG(optype);
ASSERT_CURPAD_ACTIVE("pad_alloc");
if (tmptype == SVs_PADMY) { /* Not & because this ‘flag’ is 0. */
/* For a my, simply push a null SV onto the end of PL_comppad. */
sv = *av_fetch(PL_comppad, AvFILLp(PL_comppad) + 1, TRUE);
- retval = AvFILLp(PL_comppad);
+ retval = (PADOFFSET)AvFILLp(PL_comppad);
}
else {
/* For a tmp, scan the pad from PL_padix upwards
sv = *av_fetch(PL_comppad, retval, TRUE);
if (!(SvFLAGS(sv) &
#ifdef USE_PAD_RESET
- (konst ? SVs_PADTMP : 0))
+ (konst ? SVs_PADTMP : 0)
#else
SVs_PADTMP
#endif
PL_curpad = AvARRAY(PL_comppad);
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] alloc: %ld for %s\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] alloc: %ld for %s\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long) retval,
PL_op_name[optype]));
#ifdef DEBUG_LEAKING_SCALARS
sv->sv_debug_optype = optype;
sv->sv_debug_inpad = 1;
#endif
- return (PADOFFSET)retval;
+ return retval;
}
/*
Allocates a place in the currently-compiling pad (via L</pad_alloc>)
for an anonymous function that is lexically scoped inside the
currently-compiling function.
-The function I<func> is linked into the pad, and its C<CvOUTSIDE> link
+The function C<func> is linked into the pad, and its C<CvOUTSIDE> link
to the outer scope is weakened to avoid a reference loop.
One reference count is stolen, so you may need to do C<SvREFCNT_inc(func)>.
-I<optype> should be an opcode indicating the type of operation that the
+C<optype> should be an opcode indicating the type of operation that the
pad entry is to support. This doesn't affect operational semantics,
but is used for debugging.
assert(COP_SEQ_RANGE_HIGH(name) != PERL_PADSEQ_INTRO);
ix = pad_alloc(optype, SVs_PADMY);
padnamelist_store(PL_comppad_name, ix, name);
- /* XXX DAPM use PL_curpad[] ? */
av_store(PL_comppad, ix, (SV*)func);
/* to avoid ref loops, we never have parent + child referencing each
Check for duplicate declarations: report any of:
- * a my in the current scope with the same name;
- * an our (anywhere in the pad) with the same name and the
- same stash as C<ourstash>
+ * a 'my' in the current scope with the same name;
+ * an 'our' (anywhere in the pad) with the same name and the
+ same stash as 'ourstash'
-C<is_our> indicates that the name to check is an 'our' declaration.
+C<is_our> indicates that the name to check is an C<"our"> declaration.
=cut
*/
assert((flags & ~padadd_OUR) == 0);
- if (PadnamelistMAX(PL_comppad_name) < 0 || !ckWARN(WARN_MISC))
+ if (PadnamelistMAX(PL_comppad_name) < 0 || !ckWARN(WARN_SHADOW))
return; /* nothing to check */
svp = PadnamelistARRAY(PL_comppad_name);
top = PadnamelistMAX(PL_comppad_name);
/* check the current scope */
- /* XXX DAPM - why the (I32) cast - shouldn't we ensure they're the same
- * type ? */
- for (off = top; (I32)off > PL_comppad_name_floor; off--) {
+ for (off = top; off > PL_comppad_name_floor; off--) {
PADNAME * const sv = svp[off];
if (sv
&& PadnameLEN(sv) == PadnameLEN(name)
if (is_our && (SvPAD_OUR(sv)))
break; /* "our" masking "our" */
/* diag_listed_as: "%s" variable %s masks earlier declaration in same %s */
- Perl_warner(aTHX_ packWARN(WARN_MISC),
- "\"%s\" %s %"PNf" masks earlier declaration in same %s",
- (is_our ? "our" : PL_parser->in_my == KEY_my ? "my" : "state"),
+ Perl_warner(aTHX_ packWARN(WARN_SHADOW),
+ "\"%s\" %s %" PNf " masks earlier declaration in same %s",
+ ( is_our ? "our" :
+ PL_parser->in_my == KEY_my ? "my" :
+ PL_parser->in_my == KEY_sigvar ? "my" :
+ "state" ),
*PadnamePV(sv) == '&' ? "subroutine" : "variable",
PNfARG(sv),
(COP_SEQ_RANGE_HIGH(sv) == PERL_PADSEQ_INTRO
&& SvOURSTASH(sv) == ourstash
&& memEQ(PadnamePV(sv), PadnamePV(name), PadnameLEN(name)))
{
- Perl_warner(aTHX_ packWARN(WARN_MISC),
- "\"our\" variable %"PNf" redeclared", PNfARG(sv));
- if ((I32)off <= PL_comppad_name_floor)
- Perl_warner(aTHX_ packWARN(WARN_MISC),
+ Perl_warner(aTHX_ packWARN(WARN_SHADOW),
+ "\"our\" variable %" PNf " redeclared", PNfARG(sv));
+ if (off <= PL_comppad_name_floor)
+ Perl_warner(aTHX_ packWARN(WARN_SHADOW),
"\t(Did you mean \"local\" instead of \"our\"?)\n");
break;
}
Given the name of a lexical variable, find its position in the
currently-compiling pad.
-I<namepv>/I<namelen> specify the variable's name, including leading sigil.
-I<flags> is reserved and must be zero.
+C<namepv>/C<namelen> specify the variable's name, including leading sigil.
+C<flags> is reserved and must be zero.
If it is not in the current pad but appears in the pad of any lexically
enclosing scope, then a pseudo-entry for it is added in the current pad.
Returns the offset in the current pad,
{
PADNAME *out_pn;
int out_flags;
- I32 offset;
+ PADOFFSET offset;
const PADNAMELIST *namelist;
PADNAME **name_p;
Perl_croak(aTHX_ "panic: pad_findmy_pvn illegal flag bits 0x%" UVxf,
(UV)flags);
+ /* compilation errors can zero PL_compcv */
+ if (!PL_compcv)
+ return NOT_IN_PAD;
+
offset = pad_findlex(namepv, namelen, flags,
PL_compcv, PL_cop_seqmax, 1, NULL, &out_pn, &out_flags);
- if ((PADOFFSET)offset != NOT_IN_PAD)
+ if (offset != NOT_IN_PAD)
return offset;
/* Skip the ‘our’ hack for subroutines, as the warning does not apply.
/*
=for apidoc Amp|PADOFFSET|find_rundefsvoffset
-Find the position of the lexical C<$_> in the pad of the
-currently-executing function. Returns the offset in the current pad,
-or C<NOT_IN_PAD> if there is no lexical C<$_> in scope (in which case
-the global one should be used instead).
-L</find_rundefsv> is likely to be more convenient.
+Until the lexical C<$_> feature was removed, this function would
+find the position of the lexical C<$_> in the pad of the
+currently-executing function and return the offset in the current pad,
+or C<NOT_IN_PAD>.
+
+Now it always returns C<NOT_IN_PAD>.
=cut
*/
PADOFFSET
Perl_find_rundefsvoffset(pTHX)
{
- PADNAME *out_pn;
- int out_flags;
- return pad_findlex("$_", 2, 0, find_runcv(NULL), PL_curcop->cop_seq, 1,
- NULL, &out_pn, &out_flags);
+ PERL_UNUSED_CONTEXT; /* Can we just remove the pTHX from the sig? */
+ return NOT_IN_PAD;
}
/*
=for apidoc Am|SV *|find_rundefsv
-Find and return the variable that is named C<$_> in the lexical scope
-of the currently-executing function. This may be a lexical C<$_>,
-or will otherwise be the global one.
+Returns the global variable C<$_>.
=cut
*/
SV *
Perl_find_rundefsv(pTHX)
{
- PADNAME *name;
- int flags;
- PADOFFSET po;
-
- po = pad_findlex("$_", 2, 0, find_runcv(NULL), PL_curcop->cop_seq, 1,
- NULL, &name, &flags);
-
- if (po == NOT_IN_PAD || PadnameIsOUR(name))
- return DEFSV;
-
- return PAD_SVl(po);
-}
-
-SV *
-Perl_find_rundefsv2(pTHX_ CV *cv, U32 seq)
-{
- PADNAME *name;
- int flags;
- PADOFFSET po;
-
- PERL_ARGS_ASSERT_FIND_RUNDEFSV2;
-
- po = pad_findlex("$_", 2, 0, cv, seq, 1,
- NULL, &name, &flags);
-
- if (po == NOT_IN_PAD || PadnameIsOUR(name))
- return DEFSV;
-
- return AvARRAY(PadlistARRAY(CvPADLIST(cv))[CvDEPTH(cv)])[po];
+ return DEFSV;
}
/*
in the inner pads if it's found in an outer one.
Returns the offset in the bottom pad of the lex or the fake lex.
-cv is the CV in which to start the search, and seq is the current cop_seq
-to match against. If warn is true, print appropriate warnings. The out_*
+C<cv> is the CV in which to start the search, and seq is the current C<cop_seq>
+to match against. If C<warn> is true, print appropriate warnings. The C<out_>*
vars return values, and so are pointers to where the returned values
-should be stored. out_capture, if non-null, requests that the innermost
-instance of the lexical is captured; out_name is set to the innermost
-matched pad name or fake pad name; out_flags returns the flags normally
-associated with the PARENT_FAKELEX_FLAGS field of a fake pad name.
+should be stored. C<out_capture>, if non-null, requests that the innermost
+instance of the lexical is captured; C<out_name> is set to the innermost
+matched pad name or fake pad name; C<out_flags> returns the flags normally
+associated with the C<PARENT_FAKELEX_FLAGS> field of a fake pad name.
-Note that pad_findlex() is recursive; it recurses up the chain of CVs,
+Note that C<pad_findlex()> is recursive; it recurses up the chain of CVs,
then comes back down, adding fake entries
as it goes. It has to be this way
-because fake names in anon protoypes have to store in xlow the index into
-the parent pad.
+because fake names in anon protoypes have to store in C<xpadn_low> the
+index into the parent pad.
=cut
*/
{
/* diag_listed_as: Variable "%s" is not available */
Perl_ck_warner(aTHX_ packWARN(WARN_CLOSURE),
- "%se \"%"PNf"\" is not available",
+ "%se \"%" PNf "\" is not available",
*PadnamePV(name) == '&'
? "Subroutin"
: "Variabl",
S_pad_findlex(pTHX_ const char *namepv, STRLEN namelen, U32 flags, const CV* cv, U32 seq,
int warn, SV** out_capture, PADNAME** out_name, int *out_flags)
{
- I32 offset, new_offset;
+ PADOFFSET offset, new_offset;
SV *new_capture;
SV **new_capturep;
const PADLIST * const padlist = CvPADLIST(cv);
*out_flags = 0;
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" searching \"%.*s\" seq=%d%s\n",
+ "Pad findlex cv=0x%" UVxf " searching \"%.*s\" seq=%d%s\n",
PTR2UV(cv), (int)namelen, namepv, (int)seq,
out_capture ? " capturing" : "" ));
/* first, search this pad */
if (padlist) { /* not an undef CV */
- I32 fake_offset = 0;
+ PADOFFSET fake_offset = 0;
const PADNAMELIST * const names = PadlistNAMES(padlist);
PADNAME * const * const name_p = PadnamelistARRAY(names);
? PAD_FAKELEX_MULTI : 0;
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" matched: offset=%ld (%lu,%lu)\n",
+ "Pad findlex cv=0x%" UVxf " matched: offset=%ld (%lu,%lu)\n",
PTR2UV(cv), (long)offset,
(unsigned long)COP_SEQ_RANGE_LOW(*out_name),
(unsigned long)COP_SEQ_RANGE_HIGH(*out_name)));
*out_name = name_p[offset]; /* return the name */
*out_flags = PARENT_FAKELEX_FLAGS(*out_name);
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" matched: offset=%ld flags=0x%lx index=%lu\n",
+ "Pad findlex cv=0x%" UVxf " matched: offset=%ld flags=0x%lx index=%lu\n",
PTR2UV(cv), (long)offset, (unsigned long)*out_flags,
(unsigned long) PARENT_PAD_INDEX(*out_name)
));
/* diag_listed_as: Variable "%s" will not stay
shared */
Perl_warner(aTHX_ packWARN(WARN_CLOSURE),
- "%se \"%"UTF8f"\" will not stay shared",
+ "%se \"%" UTF8f "\" will not stay shared",
*namepv == '&' ? "Subroutin" : "Variabl",
UTF8fARG(1, namelen, namepv));
}
PADNAME *n;
/* not yet caught - look further up */
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" chasing lex in outer pad\n",
+ "Pad findlex cv=0x%" UVxf " chasing lex in outer pad\n",
PTR2UV(cv)));
n = *out_name;
(void) pad_findlex(namepv, namelen, flags, CvOUTSIDE(cv),
*out_capture = AvARRAY(PadlistARRAY(padlist)[
CvDEPTH(cv) ? CvDEPTH(cv) : 1])[offset];
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" found lex=0x%"UVxf"\n",
+ "Pad findlex cv=0x%" UVxf " found lex=0x%" UVxf "\n",
PTR2UV(cv), PTR2UV(*out_capture)));
if (SvPADSTALE(*out_capture)
flags | padadd_STALEOK*(new_capturep == &new_capture),
CvOUTSIDE(cv), CvOUTSIDE_SEQ(cv), 1,
new_capturep, out_name, out_flags);
- if ((PADOFFSET)offset == NOT_IN_PAD)
+ if (offset == NOT_IN_PAD)
return NOT_IN_PAD;
/* found in an outer CV. Add appropriate fake entry to this pad */
/* But also note the offset, as newMYSUB needs it */
PARENT_PAD_INDEX_set(new_name, offset);
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad findlex cv=0x%"UVxf" saved captured sv 0x%"UVxf" at offset %ld\n",
+ "Pad findlex cv=0x%" UVxf " saved captured sv 0x%" UVxf " at offset %ld\n",
PTR2UV(cv), PTR2UV(*new_capturep), (long)new_offset));
}
*out_name = new_name;
/*
=for apidoc Am|SV *|pad_sv|PADOFFSET po
-Get the value at offset
I<po> in the current (compiling or executing) pad.
-Use macro PAD_SV instead of calling this function directly.
+Get the value at offset
C<po> in the current (compiling or executing) pad.
+Use macro C<PAD_SV> instead of calling this function directly.
=cut
*/
if (!po)
Perl_croak(aTHX_ "panic: pad_sv po");
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] sv: %ld sv=0x%"UVxf"\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] sv: %ld sv=0x%" UVxf "\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long)po, PTR2UV(PL_curpad[po]))
);
return PL_curpad[po];
/*
=for apidoc Am|void|pad_setsv|PADOFFSET po|SV *sv
-Set the value at offset
I<po> in the current (compiling or executing) pad.
-Use the macro PAD_SETSV() rather than calling this function directly.
+Set the value at offset
C<po> in the current (compiling or executing) pad.
+Use the macro C<PAD_SETSV()> rather than calling this function directly.
=cut
*/
ASSERT_CURPAD_ACTIVE("pad_setsv");
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] setsv: %ld sv=0x%"UVxf"\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] setsv: %ld sv=0x%" UVxf "\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long)po, PTR2UV(sv))
);
PL_curpad[po] = sv;
=cut
*/
-/* XXX DAPM perhaps:
- * - integrate this in general state-saving routine ???
- * - combine with the state-saving going on in pad_new ???
- * - introduce a new SAVE type that does all this in one go ?
- */
-
void
Perl_pad_block_start(pTHX_ int full)
{
ASSERT_CURPAD_ACTIVE("pad_block_start");
- SAVEI32(PL_comppad_name_floor);
+ save_strlen((STRLEN *)&PL_comppad_name_floor);
PL_comppad_name_floor = PadnamelistMAX(PL_comppad_name);
if (full)
PL_comppad_name_fill = PL_comppad_name_floor;
if (PL_comppad_name_floor < 0)
PL_comppad_name_floor = 0;
- SAVEI32(PL_min_intro_pending);
- SAVEI32(PL_max_intro_pending);
+ save_strlen((STRLEN *)&PL_min_intro_pending);
+ save_strlen((STRLEN *)&PL_max_intro_pending);
PL_min_intro_pending = 0;
- SAVEI32(PL_comppad_name_fill);
- SAVEI32(PL_padix_floor);
+ save_strlen((STRLEN *)&PL_comppad_name_fill);
+ save_strlen((STRLEN *)&PL_padix_floor);
/* PL_padix_floor is what PL_padix is reset to at the start of each
statement, by pad_reset(). We set it when entering a new scope
to keep things like this working:
Perl_intro_my(pTHX)
{
PADNAME **svp;
- I32 i;
+ PADOFFSET i;
U32 seq;
ASSERT_CURPAD_ACTIVE("intro_my");
OP *
Perl_pad_leavemy(pTHX)
{
- I32 off;
+ PADOFFSET off;
OP *o = NULL;
PADNAME * const * const svp = PadnamelistARRAY(PL_comppad_name);
const PADNAME * const name = svp[off];
if (name && PadnameLEN(name) && !PadnameOUTER(name))
Perl_ck_warner_d(aTHX_ packWARN(WARN_INTERNAL),
- "%"PNf" never introduced",
+ "%" PNf " never introduced",
PNfARG(name));
}
}
/*
=for apidoc m|void|pad_swipe|PADOFFSET po|bool refadjust
-Abandon the tmp in the current pad at offset po and replace with a
+Abandon the tmp in the current pad at offset C<po> and replace with a
new one.
=cut
(long)po, (long)AvFILLp(PL_comppad));
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] swipe: %ld\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] swipe: %ld\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long)po));
if (refadjust)
/* Use PL_constpadix here, not PL_padix. The latter may have been
reset by pad_reset. We don’t want pad_alloc to have to scan the
whole pad when allocating a constant. */
- if ((I32)po < PL_constpadix)
+ if (po < PL_constpadix)
PL_constpadix = po - 1;
}
AvARRAY(PL_comppad), PL_curpad);
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] reset: padix %ld -> %ld",
+ "Pad 0x%" UVxf "[0x%" UVxf "] reset: padix %ld -> %ld",
PTR2UV(PL_comppad), PTR2UV(PL_curpad),
(long)PL_padix, (long)PL_padix_floor
)
Tidy up a pad at the end of compilation of the code to which it belongs.
Jobs performed here are: remove most stuff from the pads of anonsub
-prototypes; give it a @_; mark temporaries as such. I<type> indicates
+prototypes; give it a C<@_>; mark temporaries as such. C<type> indicates
the kind of subroutine:
padtidy_SUB ordinary subroutine
=cut
*/
-/* XXX DAPM surely most of this stuff should be done properly
- * at the right time beforehand, rather than going around afterwards
- * cleaning up our mistakes ???
- */
-
void
Perl_pad_tidy(pTHX_ padtidy_type type)
{
break; /* no need to mark already-compiled code */
if (CvANON(cv)) {
DEBUG_Xv(PerlIO_printf(Perl_debug_log,
- "Pad clone on cv=0x%"UVxf"\n", PTR2UV(cv)));
+ "Pad clone on cv=0x%" UVxf "\n", PTR2UV(cv)));
CvCLONE_on(cv);
}
CvHASEVAL_on(cv);
}
}
else if (type == padtidy_SUB) {
- /* XXX DAPM this same bit of code keeps appearing !!! Rationalise? */
AV * const av = newAV(); /* Will be @_ */
av_store(PL_comppad, 0, MUTABLE_SV(av));
AvREIFY_only(av);
=cut
*/
-/* XXX DAPM integrate with pad_swipe ???? */
void
Perl_pad_free(pTHX_ PADOFFSET po)
{
Perl_croak(aTHX_ "panic: pad_free po");
DEBUG_X(PerlIO_printf(Perl_debug_log,
- "Pad 0x%"UVxf"[0x%"UVxf"] free: %ld\n",
+ "Pad 0x%" UVxf "[0x%" UVxf "] free: %ld\n",
PTR2UV(PL_comppad), PTR2UV(PL_curpad), (long)po)
);
if (sv && sv != &PL_sv_undef && !SvPADMY(sv))
SvFLAGS(sv) &= ~SVs_PADTMP;
- if ((I32)po < PL_padix)
+ if (po < PL_padix)
PL_padix = po - 1;
#endif
}
const AV *pad;
PADNAME **pname;
SV **ppad;
- I32 ix;
+ PADOFFSET ix;
PERL_ARGS_ASSERT_DO_DUMP_PAD;
pname = PadnamelistARRAY(pad_name);
ppad = AvARRAY(pad);
Perl_dump_indent(aTHX_ level, file,
- "PADNAME = 0x%"UVxf"(0x%"UVxf") PAD = 0x%"UVxf"(0x%"UVxf")\n",
+ "PADNAME = 0x%" UVxf "(0x%" UVxf ") PAD = 0x%" UVxf "(0x%" UVxf ")\n",
PTR2UV(pad_name), PTR2UV(pname), PTR2UV(pad), PTR2UV(ppad)
);
if (namesv) {
if (PadnameOUTER(namesv))
Perl_dump_indent(aTHX_ level+1, file,
- "%2d. 0x%"UVxf"<%lu> FAKE \"%s\" flags=0x%lx index=%lu\n",
+ "%2d. 0x%" UVxf "<%lu> FAKE \"%s\" flags=0x%lx index=%lu\n",
(int) ix,
PTR2UV(ppad[ix]),
(unsigned long) (ppad[ix] ? SvREFCNT(ppad[ix]) : 0),
);
else
Perl_dump_indent(aTHX_ level+1, file,
- "%2d. 0x%"UVxf"<%lu> (%lu,%lu) \"%s\"\n",
+ "%2d. 0x%" UVxf "<%lu> (%lu,%lu) \"%s\"\n",
(int) ix,
PTR2UV(ppad[ix]),
(unsigned long) (ppad[ix] ? SvREFCNT(ppad[ix]) : 0),
}
else if (full) {
Perl_dump_indent(aTHX_ level+1, file,
- "%2d. 0x%"UVxf"<%lu>\n",
+ "%2d. 0x%" UVxf "<%lu>\n",
(int) ix,
PTR2UV(ppad[ix]),
(unsigned long) (ppad[ix] ? SvREFCNT(ppad[ix]) : 0)
PERL_ARGS_ASSERT_CV_DUMP;
PerlIO_printf(Perl_debug_log,
- " %s: CV=0x%"UVxf" (%s), OUTSIDE=0x%"UVxf" (%s)\n",
+ " %s: CV=0x%" UVxf " (%s), OUTSIDE=0x%" UVxf " (%s)\n",
title,
PTR2UV(cv),
(CvANON(cv) ? "ANON"
: CvGV(outside) ? GvNAME(CvGV(outside)) : "UNDEFINED"));
PerlIO_printf(Perl_debug_log,
- " PADLIST = 0x%"UVxf"\n", PTR2UV(padlist));
+ " PADLIST = 0x%" UVxf "\n", PTR2UV(padlist));
do_dump_pad(1, Perl_debug_log, padlist, 1);
}
/*
=for apidoc Am|CV *|cv_clone|CV *proto
-Clone a CV, making a lexical closure.
I<proto> supplies the prototype
+Clone a CV, making a lexical closure.
C<proto> supplies the prototype
of the function: its code, pad structure, and other attributes.
The prototype is combined with a capture of outer lexicals to which the
code refers, which are taken from the currently-executing instance of
=cut
*/
-static CV *S_cv_clone(pTHX_ CV *proto, CV *cv, CV *outside);
+static CV *S_cv_clone(pTHX_ CV *proto, CV *cv, CV *outside, HV *cloned);
static CV *
-S_cv_clone_pad(pTHX_ CV *proto, CV *cv, CV *outside, bool newcv)
+S_cv_clone_pad(pTHX_ CV *proto, CV *cv, CV *outside, HV *cloned,
+ bool newcv)
{
- I32 ix;
+ PADOFFSET ix;
PADLIST* const protopadlist = CvPADLIST(proto);
PADNAMELIST *const protopad_name = PadlistNAMES(protopadlist);
const PAD *const protopad = PadlistARRAY(protopadlist)[1];
PADNAME** const pname = PadnamelistARRAY(protopad_name);
SV** const ppad = AvARRAY(protopad);
- const I32 fname = PadnamelistMAX(protopad_name);
- const I32 fpad = AvFILLp(protopad);
+ const PADOFFSET fname = PadnamelistMAX(protopad_name);
+ const PADOFFSET fpad = AvFILLp(protopad);
SV** outpad;
long depth;
- bool subclones = FALSE;
+ U32 subclones = 0;
+ bool trouble = FALSE;
assert(!CvUNIQUE(proto));
second pass. */
if (SvPAD_STATE(namesv) && !CvCLONED(ppad[ix])) {
assert(SvTYPE(ppad[ix]) == SVt_PVCV);
- subclones = 1;
+ subclones ++;
+ if (CvOUTSIDE(ppad[ix]) != proto)
+ trouble = TRUE;
sv = newSV_type(SVt_PVCV);
CvLEXICAL_on(sv);
}
{
/* my sub */
/* Just provide a stub, but name it. It will be
- upgrade to the real thing on scope entry. */
+ upgraded to the real thing on scope entry. */
dVAR;
U32 hash;
PERL_HASH(hash, PadnamePV(namesv)+1,
}
if (subclones)
- for (ix = fpad; ix > 0; ix--) {
+ {
+ if (trouble || cloned) {
+ /* Uh-oh, we have trouble! At least one of the state subs here
+ has its CvOUTSIDE pointer pointing somewhere unexpected. It
+ could be pointing to another state protosub that we are
+ about to clone. So we have to track which sub clones come
+ from which protosubs. If the CvOUTSIDE pointer for a parti-
+ cular sub points to something we have not cloned yet, we
+ delay cloning it. We must loop through the pad entries,
+ until we get a full pass with no cloning. If any uncloned
+ subs remain (probably nested inside anonymous or ‘my’ subs),
+ then they get cloned in a final pass.
+ */
+ bool cloned_in_this_pass;
+ if (!cloned)
+ cloned = (HV *)sv_2mortal((SV *)newHV());
+ do {
+ cloned_in_this_pass = FALSE;
+ for (ix = fpad; ix > 0; ix--) {
+ PADNAME * const name =
+ (ix <= fname) ? pname[ix] : NULL;
+ if (name && name != &PL_padname_undef
+ && !PadnameOUTER(name) && PadnamePV(name)[0] == '&'
+ && PadnameIsSTATE(name) && !CvCLONED(PL_curpad[ix]))
+ {
+ CV * const protokey = CvOUTSIDE(ppad[ix]);
+ CV ** const cvp = protokey == proto
+ ? &cv
+ : (CV **)hv_fetch(cloned, (char *)&protokey,
+ sizeof(CV *), 0);
+ if (cvp && *cvp) {
+ S_cv_clone(aTHX_ (CV *)ppad[ix],
+ (CV *)PL_curpad[ix],
+ *cvp, cloned);
+ (void)hv_store(cloned, (char *)&ppad[ix],
+ sizeof(CV *),
+ SvREFCNT_inc_simple_NN(PL_curpad[ix]),
+ 0);
+ subclones--;
+ cloned_in_this_pass = TRUE;
+ }
+ }
+ }
+ } while (cloned_in_this_pass);
+ if (subclones)
+ for (ix = fpad; ix > 0; ix--) {
+ PADNAME * const name =
+ (ix <= fname) ? pname[ix] : NULL;
+ if (name && name != &PL_padname_undef
+ && !PadnameOUTER(name) && PadnamePV(name)[0] == '&'
+ && PadnameIsSTATE(name) && !CvCLONED(PL_curpad[ix]))
+ S_cv_clone(aTHX_ (CV *)ppad[ix],
+ (CV *)PL_curpad[ix],
+ CvOUTSIDE(ppad[ix]), cloned);
+ }
+ }
+ else for (ix = fpad; ix > 0; ix--) {
PADNAME * const name = (ix <= fname) ? pname[ix] : NULL;
if (name && name != &PL_padname_undef && !PadnameOUTER(name)
&& PadnamePV(name)[0] == '&' && PadnameIsSTATE(name))
- S_cv_clone(aTHX_ (CV *)ppad[ix], (CV *)PL_curpad[ix], cv);
+ S_cv_clone(aTHX_ (CV *)ppad[ix], (CV *)PL_curpad[ix], cv,
+ NULL);
}
+ }
if (newcv) SvREFCNT_inc_simple_void_NN(cv);
LEAVE;
"Constants from lexical "
"variables potentially "
"modified elsewhere are "
- "deprecated");
+ "deprecated. This will not "
+ "be allowed in Perl 5.32");
/* We *copy* the lexical variable, and donate the
copy to newCONSTSUB. Yes, this is ugly, and
should be killed. We need to do this for the
}
static CV *
-S_cv_clone(pTHX_ CV *proto, CV *cv, CV *outside)
+S_cv_clone(pTHX_ CV *proto, CV *cv, CV *outside, HV *cloned)
{
#ifdef USE_ITHREADS
dVAR;
mg_copy((SV *)proto, (SV *)cv, 0, 0);
if (CvPADLIST(proto))
- cv = S_cv_clone_pad(aTHX_ proto, cv, outside, newcv);
+ cv = S_cv_clone_pad(aTHX_ proto, cv, outside, cloned, newcv);
DEBUG_Xv(
PerlIO_printf(Perl_debug_log, "\nPad CV clone\n");
PERL_ARGS_ASSERT_CV_CLONE;
if (!CvPADLIST(proto)) Perl_croak(aTHX_ "panic: no pad in cv_clone");
- return S_cv_clone(aTHX_ proto, NULL, NULL);
+ return S_cv_clone(aTHX_ proto, NULL, NULL, NULL);
}
/* Called only by pp_clonecv */
{
PERL_ARGS_ASSERT_CV_CLONE_INTO;
cv_undef(target);
- return S_cv_clone(aTHX_ proto, target, NULL);
+ return S_cv_clone(aTHX_ proto, target, NULL, NULL);
}
/*
to it and it will be returned. Otherwise the returned SV will be a new
mortal.
-If the I<flags> include CV_NAME_NOTQUAL, then the package name will not be
+If C<flags> has the C<CV_NAME_NOTQUAL> bit set, then the package name will not be
included. If the first argument is neither a CV nor a GV, this flag is
ignored (subject to change).
if (CvLEXICAL(cv) || flags & CV_NAME_NOTQUAL)
sv_sethek(retsv, CvNAME_HEK(cv));
else {
- sv_sethek(retsv, HvNAME_HEK(CvSTASH(cv)));
+ if (CvSTASH(cv) && HvNAME_HEK(CvSTASH(cv)))
+ sv_sethek(retsv, HvNAME_HEK(CvSTASH(cv)));
+ else
+ sv_setpvs(retsv, "__ANON__");
sv_catpvs(retsv, "::");
sv_cathek(retsv, CvNAME_HEK(cv));
}
/*
=for apidoc m|void|pad_fixup_inner_anons|PADLIST *padlist|CV *old_cv|CV *new_cv
-For any anon CVs in the pad, change CvOUTSIDE of that CV from
-old_cv to new_cv if necessary. Needed when a newly-compiled CV has to be
+For any anon CVs in the pad, change C<CvOUTSIDE> of that CV from
+C<old_cv> to C<new_cv> if necessary. Needed when a newly-compiled CV has to be
moved to a pre-existing CV struct.
=cut
void
Perl_pad_fixup_inner_anons(pTHX_ PADLIST *padlist, CV *old_cv, CV *new_cv)
{
- I32 ix;
+ PADOFFSET ix;
PADNAMELIST * const comppad_name = PadlistNAMES(padlist);
AV * const comppad = PadlistARRAY(padlist)[1];
PADNAME ** const namepad = PadnamelistARRAY(comppad_name);
PADNAME **names = namepad;
PADOFFSET i = ix;
while (PadnameOUTER(name)) {
+ assert(SvTYPE(cv) == SVt_PVCV);
cv = CvOUTSIDE(cv);
names = PadlistNAMESARRAY(CvPADLIST(cv));
i = PARENT_PAD_INDEX(name);
assert(SvWEAKREF(rv));
innercv = (CV *)SvRV(rv);
assert(!CvWEAKOUTSIDE(innercv));
+ assert(CvOUTSIDE(innercv) == old_cv);
SvREFCNT_dec(CvOUTSIDE(innercv));
CvOUTSIDE(innercv) = (CV *)SvREFCNT_inc_simple_NN(new_cv);
}
Push a new pad frame onto the padlist, unless there's already a pad at
this depth, in which case don't bother creating a new one. Then give
-the new pad an @_ in slot zero.
+the new pad an C<@_> in slot zero.
=cut
*/
PAD** const svp = PadlistARRAY(padlist);
AV* const newpad = newAV();
SV** const oldpad = AvARRAY(svp[depth-1]);
- I32 ix = AvFILLp((const AV *)svp[1]);
- const I32 names_fill = PadnamelistMAX((PADNAMELIST *)svp[0]);
+ PADOFFSET ix = AvFILLp((const AV *)svp[1]);
+ const PADOFFSET names_fill = PadnamelistMAX((PADNAMELIST *)svp[0]);
PADNAME ** const names = PadnamelistARRAY((PADNAMELIST *)svp[0]);
AV *av;
} else {
/* CvDEPTH() on our subroutine will be set to 0, so there's no need
to build anything other than the first level of pads. */
- I32 ix = AvFILLp(PadlistARRAY(srcpad)[1]);
+ PADOFFSET ix = AvFILLp(PadlistARRAY(srcpad)[1]);
AV *pad1;
- const I32 names_fill = PadnamelistMAX(PadlistNAMES(srcpad));
+ const PADOFFSET names_fill = PadnamelistMAX(PadlistNAMES(srcpad));
const PAD *const srcpad1 = PadlistARRAY(srcpad)[1];
SV **oldpad = AvARRAY(srcpad1);
PADNAME ** const names = PadnamelistARRAY(PadlistNAMES(dstpad));
*/
PADNAMELIST *
-Perl_newPADNAMELIST(pTHX_ size_t max)
+Perl_newPADNAMELIST(size_t max)
{
PADNAMELIST *pnl;
Newx(pnl, 1, PADNAMELIST);
*/
PADNAME *
-Perl_padnamelist_fetch(pTHX_ PADNAMELIST *pnl, SSize_t key)
+Perl_padnamelist_fetch(PADNAMELIST *pnl, SSize_t key)
{
PERL_ARGS_ASSERT_PADNAMELIST_FETCH;
ASSUME(key >= 0);
/*
=for apidoc newPADNAMEpvn
-Constructs and returns a new pad name. I<s> must be a UTF8 string. Do not
+Constructs and returns a new pad name. C<s> must be a UTF-8 string. Do not
use this for pad names that point to outer lexicals. See
-L</newPADNAMEouter>.
+C<L</newPADNAMEouter>>.
=cut
*/
PADNAME *
-Perl_newPADNAMEpvn(pTHX_ const char *s, STRLEN len)
+Perl_newPADNAMEpvn(const char *s, STRLEN len)
{
struct padname_with_str *alloc;
char *alloc2; /* for Newxz */
=for apidoc newPADNAMEouter
Constructs and returns a new pad name. Only use this function for names
-that refer to outer lexicals. (See also L</newPADNAMEpvn>.) I<outer> is
+that refer to outer lexicals. (See also L</newPADNAMEpvn>.) C<outer> is
the outer pad name that this one mirrors. The returned pad name has the
-PADNAMEt_OUTER flag already set.
+C<PADNAMEt_OUTER> flag already set.
=cut
*/
PADNAME *
-Perl_newPADNAMEouter(pTHX_ PADNAME *outer)
+Perl_newPADNAMEouter(PADNAME *outer)
{
PADNAME *pn;
PERL_ARGS_ASSERT_NEWPADNAMEOUTER;
#endif /* USE_ITHREADS */
/*
- * Local variables:
- * c-indentation-style: bsd
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- *
* ex: set ts=8 sts=4 sw=4 et:
*/
https://perl5.git.perl.org / perl5.git / blobdiff