# library has everything old one did
# (i.e. /Define=DEBUGGING,EMBED,MULTIPLICITY)?
#
-# Author: Charles Bailey bailey@genetics.upenn.edu
-# Revised: 3-Dec-1996
+# Author: Charles Bailey bailey@newman.upenn.edu
require 5.000;
$debug = $ENV{'GEN_SHRFLS_DEBUG'};
+print "gen_shrfls.pl Rev. 14-Dec-1997\n" if $debug;
+
if ($ARGV[0] eq '-f') {
open(INP,$ARGV[1]) or die "Can't read input file $ARGV[1]: $!\n";
print "Input taken from file $ARGV[1]\n" if $debug;
print "\$docc = $docc\n" if $debug;
if ($docc) {
+ if (-f 'perl.h') { $dir = '[]'; }
+ elsif (-f '[-]perl.h') { $dir = '[-]'; }
+ else { die "$0: Can't find perl.h\n"; }
+
+ # Go see if debugging is enabled in config.h
+ $config = $dir . "config.h";
+ open CONFIG, "< $config";
+ while(<CONFIG>) {
+ $debugging_enabled++ if /define\s+DEBUGGING/;
+ $use_mymalloc++ if /define\s+MYMALLOC/;
+ }
+
# put quotes back onto defines - they were removed by DCL on the way in
if (($prefix,$defines,$suffix) =
($cc_cmd =~ m#(.*)/Define=(.*?)([/\s].*)#i)) {
$defines =~ s/^\((.*)\)$/$1/;
+ $debugging_enabled ||= $defines =~ /\bDEBUGGING\b/;
@defines = split(/,/,$defines);
$cc_cmd = "$prefix/Define=(" . join(',',grep($_ = "\"$_\"",@defines))
. ')' . $suffix;
$isvaxc = 0;
$isgcc = `$cc_cmd _nla0:/Version` =~ /GNU/
or 0; # make debug output nice
- $isvaxc = (!$isgcc && $isvax && `$cc_cmd /prefix=all _nla0:` =~ /IVQUAL/)
+ $isvaxc = (!$isgcc && $isvax &&
+ # Check exit status too, in case message is shut off
+ (`$cc_cmd /prefix=all _nla0:` =~ /IVQUAL/ || $? == 0x38240))
or 0; # again, make debug output nice
print "\$isgcc: $isgcc\n" if $debug;
print "\$isvaxc: $isvaxc\n" if $debug;
+ print "\$debugging_enabled: $debugging_enabled\n" if $debug;
- if (-f 'perl.h') { $dir = '[]'; }
- elsif (-f '[-]perl.h') { $dir = '[-]'; }
- else { die "$0: Can't find perl.h\n"; }
}
else {
($junk,$junk,$cpp_file,$cc_cmd) = split(/~~/,$cc_cmd,4);
or 0; # for nice debug output
$isvaxc = (!$isgcc && $cc_cmd !~ /standard=/i)
or 0; # again, for nice debug output
+ $debugging_enabled = $cc_cmd =~ /\bdebugging\b/i;
print "\$isgcc: \\$isgcc\\\n" if $debug;
print "\$isvaxc: \\$isvaxc\\\n" if $debug;
+ print "\$debugging_enabled: \\$debugging_enabled\\\n" if $debug;
print "Not running cc, preprocesor output in \\$cpp_file\\\n" if $debug;
}
sub scan_var {
my($line) = @_;
+ my($const) = $line =~ /^EXTCONST/;
print "\tchecking for global variable\n" if $debug > 1;
- $line =~ s/INIT\(.*\)//;
+ $line =~ s/\s*EXT/EXT/;
+ $line =~ s/INIT\s*\(.*\)//;
$line =~ s/\[.*//;
$line =~ s/=.*//;
$line =~ s/\W*;?\s*$//;
+ $line =~ s/\W*\)\s*\(.*$//; # closing paren for args stripped in previous stmt
print "\tfiltered to \\$line\\\n" if $debug > 1;
if ($line =~ /(\w+)$/) {
- print "\tvar name is \\$1\\\n" if $debug > 1;
- $vars{$1}++;
+ print "\tvar name is \\$1\\" . ($const ? ' (const)' : '') . "\n" if $debug > 1;
+ if ($const) { $cvars{$1}++; }
+ else { $vars{$1}++; }
+ }
+ if ($isvaxc) {
+ my($type) = $line =~ /^\s*EXT\w*\s+(\w+)/;
+ print "\tchecking for use of enum (type is \"$type\")\n" if $debug > 2;
+ if ($type eq 'expectation') {
+ $used_expectation_enum++;
+ print "\tsaw global use of enum \"expectation\"\n" if $debug > 1;
+ }
+ if ($type eq 'opcode') {
+ $used_opcode_enum++;
+ print "\tsaw global use of enum \"opcode\"\n" if $debug > 1;
+ }
}
}
}
}
+# Go add some right up front if we need 'em
+if ($use_mymalloc) {
+ $fcns{'Perl_malloc'}++;
+ $fcns{'Perl_calloc'}++;
+ $fcns{'Perl_realloc'}++;
+ $fcns{'Perl_mfree'}++;
+}
+
$used_expectation_enum = $used_opcode_enum = 0; # avoid warnings
if ($docc) {
open(CPP,"${cc_cmd}/NoObj/PreProc=Sys\$Output ${dir}perl.h|")
else {
open(CPP,"$cpp_file") or die "$0: Can't read preprocessed file $cpp_file: $!\n";
}
+%checkh = map { $_,1 } qw( thread bytecode byterun proto );
+$ckfunc = 0;
LINE: while (<CPP>) {
while (/^#.*vmsish\.h/i .. /^#.*perl\.h/i) {
while (/__VMS_PROTOTYPES__/i .. /__VMS_SEPYTOTORP__/i) {
print "vms_proto>> $_" if $debug > 2;
- if (/^EXT/) { &scan_var($_); }
+ if (/^\s*EXT/) { &scan_var($_); }
else { &scan_func($_); }
- last LINE unless $_ = <CPP>;
+ last LINE unless defined($_ = <CPP>);
}
print "vmsish.h>> $_" if $debug > 2;
- if (/^EXT/) { &scan_var($_); }
- last LINE unless $_ = <CPP>;
+ if (/^\s*EXT/) { &scan_var($_); }
+ last LINE unless defined($_ = <CPP>);
}
while (/^#.*opcode\.h/i .. /^#.*perl\.h/i) {
print "opcode.h>> $_" if $debug > 2;
if (/^OP \*\s/) { &scan_func($_); }
- if (/^EXT/) { &scan_var($_); }
+ if (/^\s*EXT/) { &scan_var($_); }
if (/^\s+OP_/) { &scan_enum($_); }
- last LINE unless $_ = <CPP>;
+ last LINE unless defined($_ = <CPP>);
}
- while (/^typedef enum/ .. /^\}/) {
+ while (/^typedef enum/ .. /^\s*\}/) {
print "global enum>> $_" if $debug > 2;
&scan_enum($_);
- last LINE unless $_ = <CPP>;
+ last LINE unless defined($_ = <CPP>);
}
- while (/^#.*proto\.h/i .. /^#.*perl\.h/i) {
- print "proto.h>> $_" if $debug > 2;
- if (/^EXT/) { &scan_var($_); }
- else { &scan_func($_); }
- last LINE unless $_ = <CPP>;
+ # Check for transition to new header file
+ if (/^# \d+ "(\S+)"/) {
+ my $spec = $1;
+ # Pull name from library module or header filespec
+ $spec =~ /^(\w+)$/ or $spec =~ /(\w+)\.h/i;
+ my $name = lc $1;
+ $ckfunc = exists $checkh{$name} ? 1 : 0;
+ $scanname = $name if $ckfunc;
+ print "Header file transition: ckfunc = $ckfunc for $name.h\n" if $debug > 1;
}
- print $_ if $debug > 3;
- if (($type) = /^EXT\s+(\w+)/) {
- if ($isvaxc) {
- if ($type eq 'expectation') {
- $used_expectation_enum++;
- print "\tsaw global use of enum \"expectation\"\n" if $debug > 1;
- }
- if ($type eq 'opcode') {
- $used_opcode_enum++;
- print "\tsaw global use of enum \"opcode\"\n" if $debug > 1;
- }
- }
- &scan_var($_);
+ if ($ckfunc) {
+ print "$scanname>> $_" if $debug > 2;
+ if (/\s*^EXT/) { &scan_var($_); }
+ else { &scan_func($_); }
+ }
+ else {
+ print $_ if $debug > 3 && ($debug > 5 || length($_));
+ if (/^\s*EXT/) { &scan_var($_); }
}
}
close CPP;
-
+# This was:
# Kluge to determine whether we need to add EMBED prefix to
# symbols read from local list. vmsreaddirversions() is a VMS-
# specific function whose Perl_ prefix is added in vmsish.h
# if EMBED is #defined.
-$embed = exists($fcns{'Perl_vmsreaddirversions'}) ? 'Perl_' : '';
+#
+# but now we always define EMBED, so it's not a big deal any more
while (<DATA>) {
next if /^#/;
s/\s+#.*\n//;
next if /^\s*$/;
($key,$array) = split('=',$_);
- $key = "$embed$key";
+ if ($array eq 'vars') {
+ $key = "PL_$key";
+ } else {
+ $key = "Perl_$key";
+ }
print "Adding $key to \%$array list\n" if $debug > 1;
${$array}{$key}++;
}
+if ($debugging_enabled and $isgcc) { $vars{'colors'}++ }
foreach (split /\s+/, $extnames) {
my($pkgname) = $_;
$pkgname =~ s/::/__/g;
# if DOINIT is #defined. Bleah. It's cheaper to just add
# it by hand than to add /Define=DOINIT to the preprocessing
# run and wade through all the extra junk.
- $vars{'Error'}++;
+ $vars{"${embed}Error"}++;
}
# Eventually, we'll check against existing copies here, so we can add new
or die "$0: Can't write to ${dir}perlshr_gbl${marord}.mar: $!\n";
print MAR "\t.title perlshr_gbl$marord\n";
}
-foreach $var (sort keys %vars) {
+unless ($isgcc) {
+ print OPTBLD "PSECT_ATTR=\$GLOBAL_RO_VARS,PIC,NOEXE,RD,NOWRT,SHR\n";
+ print OPTBLD "PSECT_ATTR=\$GLOBAL_RW_VARS,PIC,NOEXE,RD,WRT,NOSHR\n";
+}
+foreach $var (sort (keys %vars,keys %cvars)) {
if ($isvax) { print OPTBLD "UNIVERSAL=$var\n"; }
else { print OPTBLD "SYMBOL_VECTOR=($var=DATA)\n"; }
# This hack brought to you by the lack of a globaldef in gcc.
open(OPTATTR,">${dir}perlshr_attr.opt")
or die "$0: Can't write to ${dir}perlshr_attr.opt: $!\n";
-print OPTATTR "PSECT_ATTR=\$CHAR_STRING_CONSTANTS,PIC,SHR,NOEXE,RD,NOWRT\n";
-foreach $var (sort keys %vars) {
- print OPTATTR "PSECT_ATTR=${var},PIC,OVR,RD,NOEXE,WRT,NOSHR\n";
+if ($isvaxc) {
+ print OPTATTR "PSECT_ATTR=\$CHAR_STRING_CONSTANTS,PIC,SHR,NOEXE,RD,NOWRT\n";
+}
+elsif ($isgcc) {
+ foreach $var (sort keys %cvars) {
+ print OPTATTR "PSECT_ATTR=${var},PIC,OVR,RD,NOEXE,NOWRT,SHR\n";
+ }
+ foreach $var (sort keys %vars) {
+ print OPTATTR "PSECT_ATTR=${var},PIC,OVR,RD,NOEXE,WRT,NOSHR\n";
+ }
+}
+else {
+ print OPTATTR "! No additional linker directives are needed when using DECC\n";
}
close OPTATTR;
my $major = int($] * 1000) & 0xFF; # range 0..255
my $minor = int(($] * 1000 - $major) * 100 + 0.5) & 0xFF; # range 0..255
print OPTBLD "GSMATCH=LEQUAL,$major,$minor\n";
- foreach (@symfiles) {
- print OPTBLD "CLUSTER=\$\$TRANSFER_VECTOR,,,$_.$objsuffix\n";
- }
+ print OPTBLD 'CLUSTER=$$TRANSFER_VECTOR,,',
+ map(",$_$objsuffix",@symfiles), "\n";
}
elsif (@symfiles) { $incstr .= ',' . join(',',@symfiles); }
# Include object modules and RTLs in options file
__END__
# Oddball cases, so we can keep the perl.h scan above simple
-rcsid=vars # declared in perl.c
-regarglen=vars # declared in regcomp.h
-regdummy=vars # declared in regcomp.h
regkind=vars # declared in regcomp.h
simple=vars # declared in regcomp.h
varies=vars # declared in regcomp.h
-watchaddr=vars # declared in run.c
-watchok=vars # declared in run.c
-yychar=vars # generated by byacc in perly.c
-yycheck=vars # generated by byacc in perly.c
-yydebug=vars # generated by byacc in perly.c
-yydefred=vars # generated by byacc in perly.c
-yydgoto=vars # generated by byacc in perly.c
-yyerrflag=vars # generated by byacc in perly.c
-yygindex=vars # generated by byacc in perly.c
-yylen=vars # generated by byacc in perly.c
-yylhs=vars # generated by byacc in perly.c
-yylval=vars # generated by byacc in perly.c
-yyname=vars # generated by byacc in perly.c
-yynerrs=vars # generated by byacc in perly.c
-yyrindex=vars # generated by byacc in perly.c
-yyrule=vars # generated by byacc in perly.c
-yysindex=vars # generated by byacc in perly.c
-yytable=vars # generated by byacc in perly.c
-yyval=vars # generated by byacc in perly.c
https://perl5.git.perl.org / perl5.git / blobdiff